Database Develop

Manual update P10?

Anyone succeed with manually updating P10? I have tried with no sucess.
Old method is not working.
Thanks

No but did you made the dload folder with the update.app file and then booted into the stock recovery mode?
I woudnt know any other way since they removed that from update settings : |

I tried that, does not work.

You can't manual update the P10 or P10 Plus, since it requires an online check.
They removed the ability to manual update via dload methode.
The only way at this moment is to use FunkyHuawei!

Forsaked said:
You can't manual update the P10 or P10 Plus, since it requires an online check.
They removed the ability to manual update via dload methode.
The only way at this moment is to use FunkyHuawei!
Click to expand...
Click to collapse
What about Firmware finder? I've tried this as well but I only get download failed, even everything is done as it should.

Hey,
I am working into this direction and got some promising results already. I am testing two more things during the next days (so that I can be sure my Stuff won't break your phones) and hope I can share my findings with you early next week.

Lukx said:
Hey,
I am working into this direction and got some promising results already. I am testing two more things during the next days (so that I can be sure my Stuff won't break your phones) and hope I can share my findings with you early next week.
Click to expand...
Click to collapse
Good to hear that. :good:

So, it is not possible to update, even the firmware matches your corrent model/brand?
I finally found the FW for VTR-L09C109, but when using dload method I get "Installation failed".

No, it is not possible. Huawei did something with emui 5.1.

ladodo said:
No, it is not possible. Huawei did something with emui 5.1.
Click to expand...
Click to collapse
Wrong you can now debrand for free and offline check this out https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108 can confirm it works

Does bootloader needs to be unlocked and twrp installed?

ladodo said:
Does bootloader needs to be unlocked and twrp installed?
Click to expand...
Click to collapse
Well, OP clearly says, that bootloader must be unlocked......

davebugyi said:
Well, OP clearly says, that bootloader must be unlocked......
Click to expand...
Click to collapse
It is not good since you loose warranty with bootloader unlocked.

ladodo said:
It is not good since you loose warranty with bootloader unlocked.
Click to expand...
Click to collapse
Not always correct. It depends on the local country laws you live in.

And also if you follow the instructions you end with LOCKED Bootloader so no warranty lost

crucky said:
And also if you follow the instructions you end with LOCKED Bootloader so no warranty lost
Click to expand...
Click to collapse
Is it same with P10 as it was with P9, tha it say relocked instead locked bootloader, when you lock it again?

nope : Phone LOCKED
FRP unlocked so they cant see the difference they can only find out if they check if you got the bootloader unlock code.but you also could request the code and dont use it.

Any progress here? The update has been out for months in other regions but I still haven't got anything here in Sweden :/

Unlock BootLoader "Canada"

Hello,
i'm trying to unlock my bootloader to flash TWRP etc... everywhere it says to go to huawei website and request unlock code... but when i do i get transfered to my country webpage " canada " and there is no UNLOCK.
im stuck i have no idea where i must go... tried everything and i cant register on main site as canada.

well got it unlocked... but now when i try to install TWRP on huawei p10... it keeps giving me the Erecovery... any help ?

Souljaded said:
well got it unlocked... but now when i try to install TWRP on huawei p10... it keeps giving me the Erecovery... any help ?
Click to expand...
Click to collapse
I have the same problem.
The thing is that I have already been able to restart in TWRP (full backup made in TWRP when I rebranded my Rogers VTR-L09 to VTR-L29).
For some unknown reason, I am now unable to restart in TWRP.

How?
Souljaded said:
well got it unlocked... but now when i try to install TWRP on huawei p10... it keeps giving me the Erecovery... any help ?
Click to expand...
Click to collapse
how did you unlock the bootloader? i am trying to unlock it but canada is not in the country selection on the website. i want to flash a generic system image of android 8.1 since i just got emui 8.0 and that my phone is treble compatible. thanks.

GBTEK said:
how did you unlock the bootloader? i am trying to unlock it but canada is not in the country selection on the website. i want to flash a generic system image of android 8.1 since i just got emui 8.0 and that my phone is treble compatible. thanks.
Click to expand...
Click to collapse
Unfortunately, I don't remember...
I had a lot of trouble to get my code but I did not noticed how I have done it... Sorry.

For unlock I just followed the bootloader section in the rebranding guide. No different than from the other phones. Bell L09

Are there currently any ways to unlock the Mate 10 (/Pro)'s bootloader?

After Huawei killed their bootloader unlock website, users have been left unable to unlock their bootloaders. Is there something like dc-unlocker for the Mate 10 (Pro)?

MikeTheGamer said:
After Huawei killed their bootloader unlock website, users have been left unable to unlock their bootloaders. Is there something like dc-unlocker for the Mate 10 (Pro)?
Click to expand...
Click to collapse
Yes dc-unlocker

As far as I know there's only one for the Lite, it didn't detect my phone

DC-Unlocker not supported the following devices:
WARNING:
Huawei P20 EML-xxx all versions not supported
Huawei P20 Pro CLT-xxx all versions not supported
Huawei Mate 10 ALP-xxx upgraded to Android 8x not supported
Huawei Mate 10 Pro BLA-xxx upgraded to Android 8x not supported
Huawei P10 VTR-xxx upgraded to Android 8x not supported
Huawei P10 plus VKY-xxx upgraded to Android 8x not supported
Huawei Mate 9 MHA-xxx upgraded to Android 8x not supported

DC-unlocker works if you're on BLA-L29C432B142 or lower. They did something in B145 which fixed dc-unlockers unlock code generation and the backdoor they use with DC-Phoenix. And you can't use FH to downgrade either (Not tested on B145 but on B148-SP1).
I'm not sure what builds are on other custs, but this is the Night Shot update on C432.

F*ck, my phone was 142 and I have updated in 145 just out of the Box...
Damn.

Dc-unlocker Give it a crack might still work, you just need to make sure you put the phone into management mode so it can read it phone. Just unlocked mine last night. Running magisk v16 working decrypted twrp and emui 8.0

allanjohnkemp said:
Dc-unlocker Give it a crack might still work, you just need to make sure you put the phone into management mode so it can read it phone. Just unlocked mine last night. Running magisk v16 working decrypted twrp and emui 8.0
Click to expand...
Click to collapse
more information please,model number+software/build number
currently running a BLA-L09 8.0.0.132(C782) 10 PRO myself

steelmaggot said:
more information please,model number+software/build number
currently running a BLA-L09 8.0.0.132(C782) 10 PRO myself
Click to expand...
Click to collapse
Was Running BLA-L09 8.0.0.132 at the time fresh out of the box
https://www.dc-unlocker.com/how-to-read-huawei-bootloader-unlock-code
Followed that guide, created an account cost me 4 EUR to read bootloader code.
https://www.dc-unlocker.com/huawei-mate-10-fastboot-usb-device-not-recognised-fix
Follow this guide to fix fastboot issue.
Typed fastboot oem unlock (code here without brackets)
Device will reboot and factory reset.
Use this TWRP: https://forum.xda-developers.com/mate-10/development/huawei-mate-10-pro-twrp-3-2-1-0-t3769904
Fastboot flash recovery_ramdisk twrp_bla_alp_0.7.img
Decryption and touch both working.
Install Magisk 16.0, Enjoy
For future updates you will likely need the full ota and the nocheck recovery img from HWOTA8

The question is from 148 is this possible to Downgrade with Funky Huawei to lower, 142 for example and Root with DC unlocker ?

cle_m_ent said:
The question is from 148 is this possible to Downgrade with Funky Huawei to lower, 142 for example and Root with DC unlocker ?
Click to expand...
Click to collapse
No it is not, at least one user couldn't (I know it's not much, but it's a friend of @Pretoriano80). I think someone in the Funky thread tried too.
It finds update and that but stays on 0% forever. He was trying to downgrade to both b145 and b142.

allanjohnkemp said:
Was Running BLA-L09 8.0.0.132 at the time fresh out of the box
https://www.dc-unlocker.com/how-to-read-huawei-bootloader-unlock-code
Followed that guide, created an account cost me 4 EUR to read bootloader code.
https://www.dc-unlocker.com/huawei-mate-10-fastboot-usb-device-not-recognised-fix
Follow this guide to fix fastboot issue.
Typed fastboot oem unlock (code here without brackets)
Device will reboot and factory reset.
Use this TWRP: https://forum.xda-developers.com/mate-10/development/huawei-mate-10-pro-twrp-3-2-1-0-t3769904
Fastboot flash recovery_ramdisk twrp_bla_alp_0.7.img
Decryption and touch both working.
Install Magisk 16.0, Enjoy
For future updates you will likely need the full ota and the nocheck recovery img from HWOTA8
Click to expand...
Click to collapse
can confirm works on BLA-L09 8.0.0.132 build,just done it myself :good: :victory:

steelmaggot said:
can confirm works on BLA-L09 8.0.0.132 build,just done it myself :good: :victory:
Click to expand...
Click to collapse
Was this on a recent purchase? I really want to pull the trigger but don't want a permanently locked phone. Anyone know if they are shipping phones over 142?

rockstang said:
Was this on a recent purchase? I really want to pull the trigger but don't want a permanently locked phone. Anyone know if they are shipping phones over 142?
Click to expand...
Click to collapse
Bought it two weeks ago and when I set the phone up I received the OTA to 132 build
---------- Post added at 06:46 PM ---------- Previous post was at 06:43 PM ----------
rockstang said:
Was this on a recent purchase? I really want to pull the trigger but don't want a permanently locked phone. Anyone know if they are shipping phones over 142?
Click to expand...
Click to collapse
Bought it two weeks ago and when I set the phone up I received the OTA to 132 build, I'm in the UK by the way

I have mate 10 pro running 8.0.0.141(c636) and I just tried dc it didnt work just got unknown error 375 everytime it tried to read it.

Has anyone tried BLA-A09 8.0.0.119(C567) I cant get dc unlocker to even recognize my phone.

Used DC Locker today on BLA-A09 8.0.0.111 fresh out of the box.
I followed these directions:
https://www.dc-unlocker.com/huawei-mate-10-fastboot-usb-device-not-recognised-fix
https://www.dc-unlocker.com/how-to-read-huawei-bootloader-unlock-code
The one issue I ran into was fastboot oem unlock wouldn't work initially. I went into developers options to find the oem unlocking feature greyed out. To fix this turn off automatic updates in developers options. Then put your sim card in and restart your phone. (I was keepoing the sim card out to prevent updates) I was able turn on the OEM unlocking feature after this.

Erick-kewone said:
Has anyone tried BLA-A09 8.0.0.119(C567) I cant get dc unlocker to even recognize my phone.
Click to expand...
Click to collapse
Have you tried the fix? Worked for me, but I kept getting hung up on the drivers initially.

rockstang said:
Have you tried the fix? Worked for me, but I kept getting hung up on the drivers initially.
Click to expand...
Click to collapse
I got it to work. I just had to change it from modem to phone

Guys, i just bought mate 10 lite and i have bunch of noob questions. Instead of starting new thread i wanted to ask here.
So my phone on RNE-L21C185B142 version. I read the forums and got my bootloader unlock code from dc-unlocker before its too late. So i am able to unlock my bootloader and root my phone right now.
1- Should i unlock my bootloader? I was using cyanogenmod and lineageos on my previous 2 phones. I like customize my phone thats why i install custom roms.
2-If i unlock my bootloader am i still able to get official updates somehow (like flashing from adb or twrp) without relocking bl?
3-If i install custom rom or root can i go back to stock 8.0.0.142 version so i can unlock my bl again?
Thanks in advance

[Solved] Mate 10 FRP Locked, Phone Unlocked

so I was trying to update to EMUI 9 using Beta Flashy and I forgot to reflash stock recovery after flashing root via TWRP to get Flashy to work, so after the update, it couldn't reset, and when I checked bootloader, FRP was locked and now its stuck in bootloop. can anyone provide me with a method to fixing this issue without requiring me to pay the absurd amount that FunkyHuawei and DC Unlocker charge for restoring?
thank you
edit: solution here

Try Dload method and go back to EMUI8

majidamiri15300 said:
So I was trying to update to EMUI 9 using Beta Flashy and I forgot to reflash stock recovery after flashing root via TWRP to get Flashy to work, so after the update, it couldn't reset, and when I checked bootloader, FRP was locked and now its stuck in bootloop. I read this guide https://forum.xda-developers.com/showpost.php?p=73556776&postcount=24 saying that restoring the oeminfo partition should get it to work (don't worry, I still have my bootloader unlock code), but I can't find any images for the Mate 10 (ALP-L29).
Can anyone provide me with one? If not, can you provide me with a method to fixing this issue without requiring me to pay the absurd amount that FunkyHuawei and DC Unlocker charge for restoring?
Thank you
Click to expand...
Click to collapse
Have you tried factory reset from stock recovery?
Flashing someone elses oeminfo will not help you. All it will do is lock bootloader and change your unlock code. (that thread is for Mate 9 on Nougat where oeminfo can be flashed without breaking anything. On Oreo and higher it uses oeminfo to calculate unlock code. But it also uses the imei that's embedded in oeminfo to calculate it. If you flash someone elses oeminfo your imei in oeminfo will not be the same and unlock code will change)
You most likely didn't do anything wrong. Updating stock firmware will replace your recovery with stock recovery. If it got that far in installation that is?
FH should work but it cost a lot. DC does not work since June so don't bother with it.
Else you can try service firmware from androidhost.ru.

ante0 said:
Have you tried factory reset from stock recovery?
Flashing someone elses oeminfo will not help you. All it will do is lock bootloader and change your unlock code. (that thread is for Mate 9 on Nougat where oeminfo can be flashed without breaking anything. On Oreo and higher it uses oeminfo to calculate unlock code. But it also uses the imei that's embedded in oeminfo to calculate it. If you flash someone elses oeminfo your imei in oeminfo will not be the same and unlock code will change)
You most likely didn't do anything wrong. Updating stock firmware will replace your recovery with stock recovery. If it got that far in installation that is?
FH should work but it cost a lot. DC does not work since June so don't bother with it.
Else you can try service firmware from androidhost.ru.
Click to expand...
Click to collapse
It supposedly went fine, but its still as is so. im downloading the Oreo update i was on, hopefully it works. of course the download speed isnt of much help

ante0 said:
Have you tried factory reset from stock recovery?
Flashing someone elses oeminfo will not help you. All it will do is lock bootloader and change your unlock code. (that thread is for Mate 9 on Nougat where oeminfo can be flashed without breaking anything. On Oreo and higher it uses oeminfo to calculate unlock code. But it also uses the imei that's embedded in oeminfo to calculate it. If you flash someone elses oeminfo your imei in oeminfo will not be the same and unlock code will change)
You most likely didn't do anything wrong. Updating stock firmware will replace your recovery with stock recovery. If it got that far in installation that is?
FH should work but it cost a lot. DC does not work since June so don't bother with it.
Else you can try service firmware from androidhost.ru.
Click to expand...
Click to collapse
i tried but got an "Software install failed" error.

majidamiri15300 said:
i tried but got an "Software install failed" error.
Click to expand...
Click to collapse
Which build and cust are you trying to install?

ante0 said:
Which build and cust are you trying to install?
Click to expand...
Click to collapse
128, C185

majidamiri15300 said:
128, C185
Click to expand...
Click to collapse
Wait, you were on B128?!
That's from December 2017/January 2018. And that's the reason why it won't downgrade. It has old bootloader, and you are now on new bootloader. (Since Pie has new bootloader and it flashed).
Try a more recent build, like B139 or B140
You can also try downloading from androidhost.ru using JDownloader, it seem to ignore the limit.

ante0 said:
Wait, you were on B128?!
That's from December 2017/January 2018. And that's the reason why it won't downgrade. It has old bootloader, and you are now on new bootloader. (Since Pie has new bootloader and it flashed).
Try a more recent build, like B139 or B140
You can also try downloading from androidhost.ru using JDownloader, it seem to ignore the limit.
Click to expand...
Click to collapse
does it matter though? because i cant even flash Pie. it's like its not accepting anything.

majidamiri15300 said:
does it matter though? because i cant even flash Pie. it's like its not accepting anything.
Click to expand...
Click to collapse
But it did update before bootlooping, no?

ante0 said:
But it did update before bootlooping, no?
Click to expand...
Click to collapse
i think so, yes. im downloading and trying anyway cuz what do i have to lose here.
edit: B135 didn't work, B139 still downloading...

majidamiri15300 said:
i think so, yes. im downloading and trying anyway cuz what do i have to lose here
Click to expand...
Click to collapse
It's just that B128 has old bootloader, and Pie (Including Oreo firmware from June and forward) has new bootloader. You can not downgrade from new bootloader to old bootloader.
So that's most likely why it fails to flash B128.
And you would only be able to update Pie using NoCheck recovery/TWRP, which is impossible to flash as you are FRP locked.

ante0 said:
It's just that B128 has old bootloader, and Pie (Including Oreo firmware from June and forward) has new bootloader. You can not downgrade from new bootloader to old bootloader.
So that's most likely why it fails to flash B128.
And you would only be able to update Pie using NoCheck recovery/TWRP, which is impossible to flash as you are FRP locked.
Click to expand...
Click to collapse
yeah i get that. ugh why does Huawei have to make everything so hard?

majidamiri15300 said:
i think so, yes. im downloading and trying anyway cuz what do i have to lose here.
edit: B135 didn't work, B139 still downloading...
Click to expand...
Click to collapse
majidamiri15300 said:
yeah i get that. ugh why does Huawei have to make everything so hard?
Click to expand...
Click to collapse
B135 should be able to install. It's new bootloader.
Check the instruction pdf that's included in the firmware, it will show you the directory path to use. And if you need to use microsd or USB OTG to SD adapter or something.

ante0 said:
B135 should be able to install. It's new bootloader.
Check the instruction pdf that's included in the firmware, it will show you the directory path to use. And if you need to use microsd or USB OTG to SD adapter or something.
Click to expand...
Click to collapse
i tried B139 and it didnt work. what the hell is going on???
edit: nevermind, nevermind, im just a giant idiot. ive been extracting the UPDATE.APP and using that instead of the full image. its flashing now.

majidamiri15300 said:
i tried B139 and it didnt work. what the hell is going on???
edit: nevermind, nevermind, im just a giant idiot. ive been extracting the UPDATE.APP and using that instead of the full image. its flashing now.
Click to expand...
Click to collapse
Hi. Have you solved the problem? I'm stuck on Android pie beta too and I can't rollback to Oreo. I'm frp locked too.

Todesdoktor said:
Hi. Have you solved the problem? I'm stuck on Android pie beta too and I can't rollback to Oreo. I'm frp locked too.
Click to expand...
Click to collapse
Which model and cust are you on? (ex. BLA-L29 C432)

Pretoriano80 said:
Which model and cust are you on? (ex. BLA-L29 C432)
Click to expand...
Click to collapse
ALP-L29 C636 But my build says ALP-LGRP2-OVS

Todesdoktor said:
Hi. Have you solved the problem? I'm stuck on Android pie beta too and I can't rollback to Oreo. I'm frp locked too.
Click to expand...
Click to collapse
yeah i did, it was relatively easy. just go to https://androidhost.ru, download the version for your phone, and when you unzip, you'll find a folder with instructions on how to flash. easy process, although keep in mind, this process will relock your bootloader (if you already unlocked it).
if you did unlock and it relocked, firstly, check your email if you still have the unlock code buried somewhere in your deleted emails, and if not, then check out this guide, should help you find your unlock code. it worked for me, and only cost $5 or so.

majidamiri15300 said:
yeah i did, it was relatively easy. just go to https://androidhost.ru, download the version for your phone, and when you unzip, you'll find a folder with instructions on how to flash. easy process, although keep in mind, this process will relock your bootloader (if you already unlocked it).
if you did unlock and it relocked, firstly, check your email if you still have the unlock code buried somewhere in your deleted emails, and if not, then check out this guide, should help you find your unlock code. it worked for me, and only cost $5 or so.
Click to expand...
Click to collapse
Thank you. So, for confirm, this works on frp locked? And yes, I'm unlocked and I have my code and my OEM file backup.

Question how to relock the bootloader?

hi guys ,
i want to make my oneplus 10 pro 2213 model back to store condition
how can i lock the bootloader?
i cant find any answer anywhere and im not sure if fastboot enhancer is the solution
my device is fully work btw
thanks

it's highly recommended that you don't do that. Most of the devices I've seen get brincked in that operation.
But if you wanna proceed with that, you have to flash the stock image back again, there must be no changed image (boot, recovery, system...).
And then you can run the command "fastboot flashing lock"

what about msm tool
anyway to do that with the tool ?

There is no tool current available to O10PRO, all there is require username and password.
A lot of people, myself included, are waiting for a msm tool so we can fix our devices.

OK
so if my bootloader is unlocked any problem for gpay ota ect?

It may not work .. Netflix doesn't work for example. Gpay as I don't use can't say for sure

sagiag said:
OK
so if my bootloader is unlocked any problem for gpay ota ect?
Click to expand...
Click to collapse
No unlocking the bootloader will not effect gpay or any other banking app. Now if you are rooted then yes gpay and banking apps will not work. You will have to use Magisk to fix that.

Well I'm not sure
foamerman said:
No unlocking the bootloader will not effect gpay or any other banking app. Now if you are rooted then yes gpay and banking apps will not work. You will have to use Magisk to fix that.
Click to expand...
Click to collapse
Well
I'm not rooted at all
But gpay is not working
Also Netflix is not findable in the store anymore

sagiag said:
Well I'm not sure
Well
I'm not rooted at all
But gpay is not working
Also Netflix is not findable in the store anymore
Click to expand...
Click to collapse
That could be the difference between the 2213 and 2215. I got my 15 from OnePlus carrier unlocked. That's the first thing I did was unlock the bootloader. Now my gpay, paypal and my banking apps all work. I'm not rooted yet I'm just waiting on a full rom update to get the boot.img. But I see that OnePlus is going to post oxygenOS 13 today. I might check it out. OnePlus has really done a number to the 10 this time. As for as Netflix I think there is a thread in here some place.

Hi guys
Anything new in the MSM tools?
Or maybe any other way to lock the bootloader?

look on GitHub for fastboot enhanced works really great as long your in de bootloader you can do every command with just a click i was thinking on doing that my self to but then i saw something's what i want to try out and there is also a fastboot ROM in the forums maybe that you help you too

Thanks !
I will read about that!

i have the same question.
I have a NE2213, unlocked and rooted and now want to sell it.
So my plan was to uninstall Magisk with all Modules, do a factory reset, update to NE2213_11_A.16 and then relock the bootloader.
since i am only rooted with stock rom - the only changed image should be the boot.img which will be stock after i update zo A.16.
Should be right, isnt it?
since my only other option ist to contact the support for a online MSM-Tool, which i need to do anyways when it does not work - i would give it a try...

n0gg said:
i have the same question.
I have a NE2213, unlocked and rooted and now want to sell it.
So my plan was to uninstall Magisk with all Modules, do a factory reset, update to NE2213_11_A.16 and then relock the bootloader.
since i am only rooted with stock rom - the only changed image should be the boot.img which will be stock after i update zo A.16.
Should be right, isnt it?
since my only other option ist to contact the support for a online MSM-Tool, which i need to do anyways when it does not work - i would give it a try...
Click to expand...
Click to collapse
Fastboot commands for restoring to stock worked for me.
OnePlus 10 Pro Fastboot ROMs (and how to make for any device)
First of all and most importantly, I want to say that this is not my work. This is a port of the work done by @abhinavgupta371 and @HELLBOY017 for the OP9RT. I merely made sure there weren't extra or missing files and edited the .bat and .sh...
forum.xda-developers.com
FYI - Was able to lock the bootloader on my OP 10T, A.06 Oxygen OS.