Related
Hi, can someone please help? I can't get SafetyNet check to pass in Magisk Manager, not even basicIntegrity.
I have tried everything here:
https://www.didgeridoohan.com/magisk/MagiskHideSafetyNet
... and here (in addition to digging around XDA forums)
https://www.didgeridoohan.com/magisk/MagiskInstallationIssues
I have a oneplus One running LineageOS 16 with microG pre-installed (https://lineage.microg.org/)
Specific troubleshooting steps taken, each step taken with TWO device restarts after:
1) Magisk Manager is hidden (via Magisk Hide in the Manager)
2) I am only using Magisk modules i.e. no BusyBox, xposed, etc.
3) After having issues I tried disabling all Magisk modules and rebooting twice
4) I tried the osm0sis unSU script, I flashed it in TWRP then deleted Dalvik/cache and rebooted twice, only Magisk was found
5) Developer options/USB debugging are both disabled
6) I froze in Titanium Backup any app needing root then hid Titanium Backup in Magisk (do I need to fully uninstall Titanium Backup and/or other apps with root?)
7) I tested magiskHide with a root checker app - it works, the root checker reports successful root then I hide the root checker with MagiskHide and when re-checking root then fails as expected.
8) I tried to reset fingerprint props but I reverted the settings back when this didn't help. Does anyone have any more info about this please? Unfortunately I already altered the props on my OPO and I don't have stock Cyanogen ROM available to me (it's spyware anyway!!)
A few related question please:
1) I don't need to use Systemizer plugin anymore, correct? As MagiskHide can handle this now? Or do I?
2) I tried a few SafetyNet fixes/modules but none worked... should I try more i.e. PetNoire's SafetyNet Spoofer? https://forum.xda-developers.com/apps/magisk/universal-safetynet-fix-magisk-17-t3840680/page5
Unfortunately I am not sure that I can attach a logcat output file as I am brand-new to XDA and have <10 posts.
Thank you all so much!
ertrink3n said:
I have a oneplus One running LineageOS 16 with microG pre-installed (https://lineage.microg.org/)
Click to expand...
Click to collapse
I believe this might be the key to your problem. I'm not entirely sure, but I think there might be issues passing SafetyNet on MicroG.
Try looking through MicroG threads/forums for info and help rather than Magisk.
Didgeridoohan said:
I believe this might be the key to your problem. I'm not entirely sure, but I think there might be issues passing SafetyNet on MicroG.
Try looking through MicroG threads/forums for info and help rather than Magisk.
Click to expand...
Click to collapse
Micro G can't pass safety net no more cause the Droid helper hasn't been updated....
([emoji3590]09-09-18[emoji3590])
Thank you for the confirmation @PoochyX, that's what I thought, but since I don't use or keep track of MicroG I wasn't sure.
@ertrink3n That's your answer.
Just enabling on the "Magisk Hide" option will do the thing? Or are there any other steps I should do?
Magisk Hide is already enabled in the options. I tried rebooting my phone and it is still blocking ALL banking apps that I use (I live in the Philippines.)
My phone is Xiaomi Mi 11.
- I tried installing previous versions of Magisk
- Flashing different custom ROMs: EU ROM, Global and OneOS, still the same issue.
Did you install Universal Safetynet Fix module?
MAGISK MODULE ❯ Universal SafetyNet Fix 2.4.0
Universal SafetyNet Fix Magisk module Magisk module to work around Google's SafetyNet attestation. This module works around hardware attestation and recent updates to SafetyNet CTS profile checks. You must already be able to pass basic CTS...
forum.xda-developers.com
Hide the Magisk Manager from Magisk - Options (the cog wheel) - Hide the Magisk App. This is how it works for me, my wife, my friends... Magisk Hide on it's own doesn't do the trick...
ohtoulouz said:
Did you install Universal Safetynet Fix module?
MAGISK MODULE ❯ Universal SafetyNet Fix 2.4.0
Universal SafetyNet Fix Magisk module Magisk module to work around Google's SafetyNet attestation. This module works around hardware attestation and recent updates to SafetyNet CTS profile checks. You must already be able to pass basic CTS...
forum.xda-developers.com
Click to expand...
Click to collapse
Thanks a lot, this worked! I thought it didn't work at first. I have to manually enable Magisk Hide module per application/banking app.
If it doesn´t work, just uninstall the magisk manager.
In case you need it reinstall it.
Works great for me.
RebornCheiko said:
Thanks a lot, this worked! I thought it didn't work at first. I have to manually enable Magisk Hide module per application/banking app.
Click to expand...
Click to collapse
Glad it helps.
And yes, MagiskHide is required if rooted (this is mentioned in the module description)
I use the app airfrozen to freeze magisk. Do my banking things and after that I unfreeze it. It's faster than uninstall and reinstall.
The hide worked for me under lineage and my sagit.
But under mi11 it will not. No idea why.
make sure you set Magisk hide to the SUB-items in each app you want to hide it from. Also make sure you pass Safeynet.
I am running MIUImix weekly and can pass Safetynet, googlepay etc without running any special modules.
This is a discussion and help thread for the newer versions of Magisk.
The main goal of this thread is to help users migrate to Magisk v24+
SafetyNet
Basic integrity Pass
CTS profile match Pass
Play Protect certification
Device is certified
Feel free to discuss or give links to other Magisk related issues.
Fixes for gPay, banking apps and/or other apps and games that detect a 'compromised' Android system.
Please try to restrain from discussing alternative (unofficial) Magisk builds that include changes that were removed or can not be included in the official Magisk builds.
Please read John's State of Magisk (medium.com)
State of Magisk: 2021
State of Magisk: 2020
Starting with the Magisk 23 (23010) canary builds.
MagiskHide is removed.
MagiskHide masked the sensitive properties of the device to hide it from SafetyNet.
Renaming (repackaging) the Magisk app is/was not part of MagiskHide.
You still have the option to Hide the Magisk app under setting.
Magisk Module online Repo is removed.
The Magisk Module online Repo is still available and can be accessed outside of the Magisk app.
Everything SafetyNet is removed.
This includes the SafetyNet check that was incorporated into the Magisk app.
Zygisk is introduced.
Zygote + Magisk = Zygisk
The Deny list replaces the Hide list.
The Hide list (more or less) hid Magisk from the process on the list.
The Deny list is similar but instead of hiding Magisk from the process, Magisk is unloaded so there is nothing to hide.
Starting with the Magisk 23 (23017) canary builds.
Magisk supports update channels per module.
Each module can include it's own update link.
Hide Magisk offline.
You do not need internet connection to rename (repackage) the Magisk app.
What does this mean?
Not much.
It is just the next step in Magisk's development.
Zygisk is a big step forward.
Even before these changes in Magisk, the xda family and the Android community have always been active and willing to share.
Jump to PostMagisk - Modules - Apps - Force Basic Attestation - Basic Attestation - Adjust Prop values - Notes - Points of Interest
This is post will be updated once Magisk v24 is released.
MagiskThe Magic Mask for Android.
Magisk Links:
GitHub
Installation Instruction
Frequently Asked Questions
Magisk Documentation
Magisk Troubleshoot Wiki (by Didgeridoohan)
Release Notes
Download Links:
Stable and Beta releases.
GitHub
Canary
GitHub
The notes.md file is the change log.
The app-debug.apk is Magisk canary.
Click on app-debug.apk and choose View Raw or click on the Download option.
Credits:
topjohnwu
All who contribute and support this project.
Modules
MagiskHide Props Config
This module allows you to add, change and adjust prop values systemlessly using Magisk.
MagiskHide Props Config Links:
GitHub
xdaThread
Download Links:
GitHub
Credits:
Didgeridoohan
All who contribute and support this project.
Universal SafetyNet Fix
It has been a year now since kdrag0n figured out how to 'trick' SafetyNet.
This 'trick' has been implemented properly into quite a few custom roms.
For custom roms that do not include it and/or stock roms, he turned it into a module.
Universal SafetyNet Fix Links:
GitHub
xdaThread
Download Links:
GitHub
Credits:
kdrag0n
All who contribute and support this project.
Apps
Fox's Magisk Module Manager
This app allows you to manage and install Magisk modules.
Including from an online repo.
Fox's Magisk Module Manager Links:
GitHub
Download Links:
GitHub
Credits:
Fox2Code
All who contribute and support this project.
Play Intergrity API Checker
This app shows info about your device integrity as reported by Google Play Services.
If any of this fails could mean your device is rooted or tampered in a way (for example you have an unlocked bootloader).
Development:
GitHub
Download Links:
PlayStore
Credits:
1nikolas
All who contribute and support this project.
YASNAC - Yet Another SafetyNet Attestation Checker
YASNAC (short for Yet Another SafetyNet Attestation Checker) is an Android app that demonstrates SafetyNet Attestation API.
YASNAC Links:
GitHub
PlayStore
Download Links:
GitHub
PlayStore
Credits:
RikkaW
All who contribute and support this project.
Force Basic Attestation
Newer devices are designed to support hardware attestation.
Currently there is no way to hide the sensitive device properties when checked using hardware attestation.
To get around this, kdrag0n figured out how trick SafetyNet that the device does not support hardware attestation.
SafetyNet will then fall back to check using basic attestation.
Note:
This method will work for devices that support hardware attestation and devices that do not.
Enable Zygisk.
Install the USNF module.
Reboot
To keep posts short, the instructions are hid by spoiler tags.
Spoiler: Instructions
If you have not installed Magisk.
Follow the installation link in the Magisk post.
Download the Universal SafetyNet Fix module.
Download link is in the Modules post.
Enable Zygisk
Open the Magisk app.
Go to Settings.
Scroll down to the Magisk section.
Toggle Zygisk on.
Go back to the Magisk Home screen.
Go to Modules.
Select Install from storage.
Navigate to the Universal SafetyNet Fix module zip file and select it.
Reboot.
The USNF module will adjust the sensitive props that are needed to pass SafetyNet.
Depending on the device and system (ROM) configuration, you might need to adjust a few more.
See the Adjust Prop values post.
Basic Attestation<Reserve>
Older devices that can not support hardware attestation there are other options.
Enable Zygisk.
Enable Denylist.
Add com.google.android.gms.unstable to the Denylist.
Add com.google.android.gms to the Denylist if needed.
Reset the sensitive prop values for the device.
Click to expand...
Click to collapse
Due to other modules and methods that require DenyList to be inactive, this method is more for reference.
For ease of use and compatibility, I would recommend using the USNF module instead.
See the Force Basic Attestation post.
This post will be updated in a few days.
Adjust Prop values<Reserve>
Reset sensitive prop values.
Spoiler: Instructions
Download the MagiskHide Props Config module.
Open the Magisk app and select the Modules option.
Select Install from storage option.
Navigate to where you saved the MHPC module and select it.
When the install is done, reboot.
Open a terminal app (or adb shell) and type props in the command line.
Make sure to grant root access
Select the Edit MagiskHide props (active) option.
(Currently option number 4)
It will show you the sensitive props that need to be adjusted.
If they all show (active) no changes needed.
If there is a prop value that shows as (enabled, not active) then you need to activate it by selecting it or a for all.
You will be prompted to set MagiskHide sensitive props?
Enter y(es), n(o) or e(xit):
If you are using a custom rom, you might also have to adjust the build fingerprint and security date.
From the MHPC main menu select Edit device fingerprint option.
(Currently option number 1)
Select Pick a certified fingerprint option.
(Currently option f)
Select the latest certified print for your device.
If your device is not listed, choose a device that is close to yours.
This post will be updated soon.
NotesandCommon Issues<Reserve>
Spoiler: SafetyNet
<Reserve>
Spoiler: Play Protect certification
<Reserve>
Spoiler: PlayStore App Purchases and Updates
<Reserve>
Points of Interest.
LSPosed
Zygisk releases are now included.
Download Links:
GitHub - Releases
Shamiko
Download Links:
GitHub - Releases
Denylist Unmount
Download Links:
GitHub - Releases
Yay! I get post no. 10!
Good to see this thread up Doc! ... How are you linking / promoting it?
Want mentions in Magisk General Discussion thread, or not for now?...
I note that this thread has the advantage of having an active OP...
So what? - Means I can post rubbish and it will be cleaned! ... Love a clean house... Hope you're a good housekeeper @ipdev! PW
zputnyq said:
Hi all,
I'm on TJW's canary 23019.
Does anyone know/could explain what is/are the difference(s) with enforce denylist activated and not activated ?
Click to expand...
Click to collapse
denylist (which preserves some of MagiskHide infrastructure) is active, or not active...
Nb. For Zy-Shamiko hiding module solution to work, this needs to be deactivated for Shamiko to do the hiding itself; Shamiko just uses the same list for convenience / simplicity... PW
Edit: Lets kickstart things here!
pndwal said:
denylist (which preserves some of MagiskHide infrastructure) is active, or not active...
Nb. For Zy-Shamiko hiding module solution to work, this needs to be deactivated for Shamiko to do the hiding itself; Shamiko just uses the same list for convenience / simplicity... PW
Edit: Lets kickstart things here!
Click to expand...
Click to collapse
Ok, I get it. Thank you.
I was confused since I use an old device which doesn't really need this part to do the hiding & on v23017 John made that part work along with the configure denylist, I mean configure denylist is greyed out when denylist part isn't active.
zputnyq said:
Ok, I get it. Thank you.
I was confused since I use an old device which doesn't really need this part to do the hiding & on v23017 John made that part work along with the configure denylist, I mean configure denylist is greyed out when denylist part isn't active.
Click to expand...
Click to collapse
You could do worse than read the first 5 posts here! PW
Thanks @ipdev
I tried to put a short help for probably the most frequent posts/questions soon to expect.
(Sorry for cross-posting, I first put to the old and cluttered General Magisk thread but this is now better place)
===
Please carefully read Magisk Changelog and OP posts in this thread
Study the Magisk documentation from the official Magisk Github page - particularly about installing Magisk (if not familiar with patching the image in Magisk app and flashing the patched img from Fastboot- different from the old school about flashing Magisk zip through TWRP)
a) No more MagiskHide. New technology instead (for more or less the same - to help hiding root): Zygisk+DenyList
b) No more built in SafetyNet checker. Install from PlayStore e g: YASNAC to check your SN
c) Modules window does no more connect to the old Modules repository.
You must download module zip files manually and "Install from local storage".
Or search for and install Fox Magisk Module Manager (Fox Mmm) app - it will connect to the new, alternative repository and the old 'official' repo, allowing you to install from both
---
0) If upgrading Magisk and if you previously did "Hide Magisk app/Mngr" from Magisk app/mngr - always "Restore Magisk app/Mngr" before upgrading Magisk
1) Make sure that both Magisk app and Magisk are installed and updated to the new version v24 version. Inspect version numbers on the main Magisk window/page
2) Make sure to uninstall all Riru modules (Riru is not compatible with Zygisk that comes with Magisk v24)
3) Settings, Enable Zygisk and reboot.
Then check on the main window does it show Zygisk Yes
4) Settings, enable Enforce DenyList.
Configure DenyList, enable filters to Show OS and System apps.
Find Google Play Services and check-in only the two processes ending with gms and gms.unstable.
You will have to check in all your banking apps and so as you used with MagiskHide.
Always reboot upon reconfiguring DenyList
5) If SafetyNet does not pass, install USNF 2.2.1 and test again.
Always reboot upon installing a module, also if/when you enable Systemless Hosts
Note: Once you install/enable USNF 2.2.1, it will remove Google Play Services from your DenyList - but don't worry, USNF takes care of GMS
6) If you are on non-certified custom ROM and you still don't pass SN - then you will need Magisk Hide Props Config module - check for and consult the MHCP thread
---
If you want to hide Zygisk, then instal Shamiko module - and you must disable Enforce DenyList (although DenyList must stay configured).
But Shamiko is really not essential (might help for some banking apps but it's irrelevant for SafetyNet)
---
Banking apps - out of scope for this post (also, this thread is about the Magisk v24 itself, not abkut the particular banking apps)
Go to Magisk Github documentation, read Wiki, there is a section with tips you should try first
If putting your banking app to DenyList (now, instead of the old Magisk Hide) and hiding Magisk app does not help, and the other tips from Wiki do not help (like renaming TWRP folder and so), search in this thread how to use Hide My Applist (Zygisk-LSPosed module)
Every time you apply another tip to your troublesome banking app - go to Settings, Apps, and delete Cache and Data for that banking app before you try to open it again (some apps will cache that they previously found the phone was rooted)
Even with HMA, there are certain banking apps that cannot be tricked (on some phones like Xiami, etc)
---
Momo - absolutely not essential for your life
When you pass SN, Momo might still detect that your Bootloader is unlocked - you cannot hide it from Momo on e.g. Xiaomi phones
Generally, treat Momo as 'banking' apps (add to DenyList and reboot)
Momo does not look for apps (Magisk app, LSPosed mngr, LSPosed modules), hence for Momo you don't need to bother with HMA
Basic tips for Momo: Remove/rename TWRP folder, disable USB Debugging - for the rest, search for Momo posts in this thread - but still, there will be findings you could not hide from Momo (not encrypted Data, custom ROM, etc)
===
PS: Magisk Alpha v24.1 (vvb2060 and her team) has departed their way (different package name, revival of MagiskHide?), hence this post is now (mainly) for the official TJW Magisk Stable and Canary v24
(Some parts do apply also to Alpha but use Alpha on your own risk and ask the other Alpha users about the Alpha status and practices)
===
Last but not the list - there night be specifics for certain phones (like flashing with Odin for Samsung, end so on)
This post is generic, for your specific practices read/search through this thread and also on your phone/model subforuns on XDA
Hello - sorry if obvious but I'm having issues getting some apps checking for root to pass. I think the issue might well be the statement related to "Google Play Services and check-in only the two processes ending with gms and gms.unstable."
Regardless of whether I tick just these two, or if I tick the whole of Google Play Services, once I reboot and if I go back into Magisk the app reports that these services are no longer hidden.
This is Pixel6Pro Stock, January update, Magisk canary (but 24001 that synced with the public build) + Zygisk + USNF 2.2.1
Thank you
Chris
@ipdev
Thread was pinned. Thx for your effort
Nice. Will we be able to run a module like fakegapps without riru/LSPosed?
crypticc said:
Hello - sorry if obvious but I'm having issues getting some apps checking for root to pass. I think the issue might well be the statement related to "Google Play Services and check-in only the two processes ending with gms and gms.unstable."
Regardless of whether I tick just these two, or if I tick the whole of Google Play Services, once I reboot and if I go back into Magisk the app reports that these services are no longer hidden.
This is Pixel6Pro Stock, January update, Magisk canary (but 24001 that synced with the public build) + Zygisk + USNF 2.2.1
Thank you
Chris
Click to expand...
Click to collapse
No, you don't need to add Play Services processes w/ Zy-USNF as I explained here:
https://forum.xda-developers.com/t/magisk-general-support-discussion.3432382/post-86321879
Download YASNAC and check if you pass SafetyNet, then that you have Play Protect Device is certified in Play Store settings... If you have these, Bank app is using its own custom detection methods... PW
kurtn said:
Nice. Will we be able to run a module like fakegapps without riru/LSPosed?
Click to expand...
Click to collapse
Yes, Use Zygisk-LSPosed. PW
pndwal said:
No, you don't need to add Play Services processes w/ Zy-USNF as I explained here:
https://forum.xda-developers.com/t/magisk-general-support-discussion.3432382/post-86321879
Download YASNAC and check if you pass SafetyNet, then that you have Play Protect Device is certified in Play Store settings... If you have these, Bank app is using its own custom detection methods... PW
Click to expand...
Click to collapse
Yes I appreciate that. I guess my question was if it is correct that after reboot USNF deselects the gms and gms.unstable
Thanks for the explanation.
FYI found what was triggering the app and got it working. Before I had just renamed Magisk (I renamed to MagicApp if that matters) but that didn't work. Also "pausing" the app wasn't enough.
I needed to actually uninstall the Magisk Manager app itself.
So the mechanism being used by the other app wasn't looking for Magisk/SU, but the app iself.
The App failing doesn't have any local file permissions so must've been something else.
Actually I found two apps failing root check and both were resolved by uninstalling the (renamed) Magisk APK.
So I wondered if the app was simply listening to debug messages.
So I reinstalled and then reproduced the failure looking into ADB logcat.
I could see during opening and just before the protection was triggered logcat events against the ".Magisk" app related to denying access. Uninstalling Magisk app stopped those messages and then the app was able to start.
Should Magisk "hiding" the magisk manager app by renaming it from ".Magisk" also have relabelled all of the messages and such related to the app?
I have Redmi Note 7.
It was running on xiaomi.eu_multi_HMNote7_V11.0.6.0.PFGCNXM_v11-9. I had magisk installed, there were no problems with root detection.
I installed xiaomi.eu_multi_HMNote7_V11.0.7.0.PFGCNXM_v11-9 using OrangeFox Recovery.
Then my problems with Magisk began. I uninstalled magisk completely via orangefox recovery and install again v21.4 as zip. Finally I updated magisk manager and magisk module with success and now it is latest version 25.2. I can't check safetynet via magisk app, cuz there is no option, so I used app called YSNAC. It shows: Basic integrity: failed, CTS profile match: failed. I perform hide Magisk app, named new app as "Settings", but the old Magisk icon did not disappear (I don't know if it's ok).
I activate Zygisk and enforce deny list and set deny list (banking apps, play services, google play store).
I installed modules like MagiskHide Props Config and Universal SafetyNet Fix.
BTW. Why there is no more online searching modules via magisk manager?
Root working ok.
I don't know what can I do more. My banking apps detects that I have root.
mcichy10 said:
I have Redmi Note 7.
It was running on xiaomi.eu_multi_HMNote7_V11.0.6.0.PFGCNXM_v11-9. I had magisk installed, there were no problems with root detection.
I installed xiaomi.eu_multi_HMNote7_V11.0.7.0.PFGCNXM_v11-9 using OrangeFox Recovery.
Then my problems with Magisk began. I uninstalled magisk completely via orangefox recovery and install again v21.4 as zip. Finally I updated magisk manager and magisk module with success and now it is latest version 25.2. I can't check safetynet via magisk app, cuz there is no option, so I used app called YSNAC. It shows: Basic integrity: failed, CTS profile match: failed. I perform hide Magisk app, named new app as "Settings", but the old Magisk icon did not disappear (I don't know if it's ok).
I activate Zygisk and enforce deny list and set deny list (banking apps, play services, google play store).
I installed modules like MagiskHide Props Config and Universal SafetyNet Fix.
BTW. Why there is no more online searching modules via magisk manager?
Root working ok.
I don't know what can I do more. My banking apps detects that I have root.
Click to expand...
Click to collapse
I have the same issue since today on Galaxy s21 Ultra!
I decided to uninstall completely Magisk. Unfortunately SafetyNet still doesn't pass, banking aps not working. Only thing I can do is wipe all data, format to factory and install MIUI again. Maybe I'll try MIUI 12.
mcichy10 said:
I decided to uninstall completely Magisk. Unfortunately SafetyNet still doesn't pass, banking aps not working. Only thing I can do is wipe all data, format to factory and install MIUI again. Maybe I'll try MIUI 12.
Click to expand...
Click to collapse
try using Shamiko together with Zygisk and without forcing the denylist
I tried this before with zero success
With the MagiskHide Props config, you need to open a terminal, enter "su" and then "props". Then set the fingerprint to the certified one.
neelchauhan said:
With the MagiskHide Props config, you need to open a terminal, enter "su" and then "props". Then set the fingerprint to the certified one.
Click to expand...
Click to collapse
yup, I did that. Didn't work for me.
I performed "Format Data", flashed latest MIUI for my device, installed Magisk, Hided Magisk, activated Zygisk, Forced deny list and it's working well.
i tried like 4 different ways and NONE work
Universal SafetyNet Fix (didnt work)zydisk (didnt work)
denylist (didnt work)
magiskhide proops config (didnt work)
i have a mi 9 with miui 13+android 12
EDIT: it just takes trial and error, had to try a couple of different devices and one that worked for me was mi 9 europe
I can pass safety net on magisk 25.2 . I don't install magisk hide props. I have few things installed and a modified Verison of universal safety fix and I am using zygisk.
Alot times I forget about messages on here . Telegram me if I don't get back to u on @Assassin4Hire
GitHub - kdrag0n/safetynet-fix: Google SafetyNet attestation workarounds for Magisk
Google SafetyNet attestation workarounds for Magisk - GitHub - kdrag0n/safetynet-fix: Google SafetyNet attestation workarounds for Magisk
github.com
Flash this.
Enjoy.
yot2703 said:
GitHub - kdrag0n/safetynet-fix: Google SafetyNet attestation workarounds for Magisk
Google SafetyNet attestation workarounds for Magisk - GitHub - kdrag0n/safetynet-fix: Google SafetyNet attestation workarounds for Magisk
github.com
Flash this.
Enjoy.
Click to expand...
Click to collapse
I tried this workaround in my Samsung SM-G531H with Android 7.1 and I tested it with the previously mentioned YASNAC app, and the SafetyNet Attestation tests (Basic Integrity and CTS profile match) PASSED!
Now, I'm able to use my bank app (BBVA) Thanks.
My phone is rooted and i can't access any mobile banking, I've tried using Shamiko module and such but still can't access it.
I looked up on the internet and people say i need to install Magisk Delta instead
I followed the instruction on their site by direct installing it
Once i followed it didn't installed correctly, everytime i open Magisk Delta it keeps showing message "Requires Additional Setup" even I've done rebooting
Please i need some help
Is the original magisk still installed? Then if yes the magisk is overlapping each other, you need to uninstall the original first then install the delta one
install magisk safety net module, hide prop config, enable zygisk and select bank app from block list. is the best way for use bank apps without problems. dont install magisk delta is not suggested
wetito said:
install magisk safety net module, hide prop config, enable zygisk and select bank app from block list. is the best way for use bank apps without problems. dont install magisk delta is not suggested
Click to expand...
Click to collapse
This method doesn't work for all banking apps
for my apps works. there is a new version of safety net module. you could try