It's not working New Nokia Nost Tool will not working it's says when I select nb0 file software updater needs to update...
Since NOST is based on OST 6.0.4 it is not possible to flash oreo firmware images without extracting and patching them.
You can download prepatched and repacked images from here: https://drive.google.com/drive/folders/18W60rrpUOJF1ZmN0MR0VjxQYo52o6sNq?usp=sharing
(Link is in the NOST OP as well)
Related
Hello Guys,
It's now possible to downgrade P10 Plus from Oreo to Nougat
Disclaimer: I'm not responsible what happens to your device or if you active some nuclear missiles in the process
Prerequisites:
Oreo Firmware on your P10 Plus
Nougat Firmware for P10 Plus
HWOTA 8 from mankindttw https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-oreo-update-package-t3699522
Rename the files according to this guide:
https://forum.xda-developers.com/mate-9/how-to/guide-mate-9-flash-update-package-t3593108
Access to fastboot and adb
Downgrade Nougat
A. Put update.zip, update_data_public.zip, and update_all_hw.zip files into HWOTA8 repack directory.
B. Run repack.bat to update zip files.
C. Go through "Flash Update" steps and use repacked zip files.
D. Enter recovery and do factory reset.
Flash Update
A. Use Vol-Dn + USB Cable to boot into fastboot mode.
B. Use Replace_Recovery.bat in HWOTA8 to flash TWRP recovery.
C. Disconnect USB cable, use Vol-Up + Power to boot into TWRP.
D. Create "HWOTA8" directory in MTP sdcard.
E. Put hwota8_update.zip, MHA_RECOVERY8_NoCheck.img, and three huawei update package (update.zip, update_data_public.zip, and update_all_hw.zip) files into "HWOTA8" directory.
F. TWRP install sdcard hwota8_update.zip, it will reboot and install update automatically.
Hi!
I got this message when I flash the repacked (L29C432B164) zips with HWOTA8: "Software install failed! - Failed to check the update files. - Please download the package again."
Whats wrong? I've followed these steps, but it failed.
When I put Oreo .311 zips without repacking, but renamed (tutorial) in the HWOTA8 directory on my sdcard and install [hwota8_update.zip] with twrp it installs normal incl. verify BUT there is no change. Everthing is like before.
On my P10 (normal), after a factory reset with .311 it's now on build no. 8.0.0.046(01BN).
I cant downgrade to nougat or update back to .311
What can I do? Any suggestions?
Downgrade work only with rollback firmware like B217
Gesendet von meinem VKY-AL00 mit Tapatalk
Ok, than I have to wait or is there another way to leave the 8.0.0.046(01BN)?
There is a rollback firmware on firmware finder.
Gesendet von meinem VKY-AL00 mit Tapatalk
Do I need to install the rollback with firmware finder, manually flashing the zips with twrp or with HWOTA?
Install the rollback firmware via proxy in FF
Oiphobie said:
Ok, than I have to wait or is there another way to leave the 8.0.0.046(01BN)?
Click to expand...
Click to collapse
can i know why you want to roll back to nougat from oreo ? are there bugs or something ?
How to fix error 9 ? check_write_data_to_pattion, write data error ?
Rommco05 said:
Can I only use rollback packages? Because this firmware contains only 2 zip files for L29. You personaly tested this way, I never use hwota hopefuly I dont brick my phone
Click to expand...
Click to collapse
I have done it only with rollback b217 and I think yes you need rollback packages
if i remove public with notepad, i get an error, if i don't remove it, install fail, any help
Source of firmware
may i ask where you got the firmwares
i get the rollback from FF, there is no other rolllback firmware for vtr-l29c636.
trigos9421 said:
i get the rollback from FF, there is no other rolllback firmware for vtr-l29c636.
Click to expand...
Click to collapse
Vtr is not vky therefore it's P10 not P10 Plus
Why I cant repack ?
Downgrade Nougat
A. Put update.zip, update_data_public.zip, and update_all_hw.zip files into HWOTA8 repack directory.
B. Run repack.bat to update zip files.
C. Go through "Flash Update" steps and use repacked zip files.
I run "repack.bat" from Windows 7 it says the 7zip.exe are not compactible, any suggestions ?
How the repacked zip files loock like? I have downloaded the C432 Roolback firmware from Firmware Finder, must I repack them to ?
Rommco05 said:
Rollback contains 3 zips, I think just 2
Click to expand...
Click to collapse
You didnt answer me on my Question
Becouse a lot of user dont understand and get confused I have made a new tutorial for Rollback from Oreo B321 C636 P10 plus, to Nougat VKY-L29 C432 B181 or other region like C185 or C636
BE CARREFULL AND READ THIS - Do exactly like this description and you will not fail
If you read 2 files , dont aske "can I use 3 files" , becouse there is writen 2 files
Also dont aske can I use "this" or "this" becouse you can only use this what is written and than you have no error.
For Rollback from Oreo B321 C636 P10 plus, to Nougat VKY-L29 C432 B181 or other region
like C185 or C636
What you need:
Access to fastboot and adb or Minimal ADB and Fastboot installed on computer( in root C: )
HWOTA8 from mankindttw https://forum.xda-developers.com/mat...ckage-t3699522
Nougat Rollback Firmware for P10 Plus
I used this firmware becouse I have a 432 model:
VKY-L29C432B181 ( its a rollback for C432 on FirmwareFinder ) only 2 zips or
VKY-L29C432B185 ( its a new rollback for C432 on FirmwareFinder will lock bootloader ) only 2 zips
update_full_VKY-L29_hw_eu.zip and update.zip
Extract the downloaded HWOTA8_2017110501.zip to C: on Computer
Now Create "HWOTA8" folder in EXTERNAL sdcard, in this folder put only
from the extracted HWOTA8_2017110501.zip this 1 file:
MHA_RECOVERY8_NoCheck.img
also this 2 files from downloaded firmware:
update.zip - dont rename
update_full_VKY-L29_hw_eu.zip - rename to - update_all_hw.zip
for VKY-L09 instead of update_full_VKY-L29_hw_eu.zip you download the update_full_VKY-L09_hw_eu.zip and rename as abow described
and this moded - hwota8_update2.zip ( downloaded here as atached file )
It is moded so you need only 2 firmware files for Rollback and NO need to Run repack.bat to update zip files.
SO LETS GO
ON PHONE Use Vol-Dn + USB Cable to boot into fastboot mode.
flash TWRP8_3.0.3.img > comand: fastboot flash recovery_ramdisk TWRP8_3.0.3.img
we use this TWRP becouse it is in HWOTA8 ectracted folder
Boot into TWRP and install from external sdcard hwota8_update2.zip, it will reboot and install update automatically.
After reboot you have Nougat B181 or B185 ( depend what you chose ) on VKY-L29C432
Thats How I did it in 15 minutes
Yes If you have another model not C432 you must download the 2 firmware files for your model region
I'm not responsible for any bricks.
If you fail you didnt follow exatly the tutorial
Reading is the Mother of Knowlege.
Woow Great Thank you
Like This Video
MHA_RECOVERY8_NoCheck.img file is fo Mate 9. It is the reason of my hard bricked Mate 9 Pro. It even doesn't support Mate 9 Pro; how can you think that it will fix your case?
Just try rollback otherwise wait for Official release of Oreo.
This worked fine for me,it took just over 10 mins and I'm back on nougat. I'd previously been on stock Oreo (rooted) and treble (I have a p10 plus VKYL29)
Recently I tried to flash Realme UI to my device using the ofps provided in the forum on the realme forums.
This resulted in a bootloop but since I had bootloader unlocked, I tried to flash the fastboot images, provided here.
This did not solve the bootloop issue.
In the end what I did to fix it was:
Download the stock firmware.
Extract the firmware files using Oppo_ozip_decrypt tool.
Install the official TWRP.
Install the firmware zip files using TWRP.
Download Links to official firmware:
RMX1992EX_11.A.19
RMX1992EX_11.A.18
RMX1992EX_11.A.17
NOTE:
These firmware links are for RMX1992 only. Make sure to download the firmware for your respective devices.
Well done
Will it work on rmx 1991?
In the searching for an EMUI5 firmware I have stumbled upon an EMUI8 one that my phone can have installed, I got this from the Firmware Finder:
Code:
Firmware approved for install
Build: PRA-LX3 8.0.0.360(C605)
Also there are other that says FULLOTA-MF-PV, FULLOTA-MF or just FULLOTA, which one should I use?
Now, in Multi-Tool I have an option to "Unbrick" the phone by flashing several images, can I use that to also flash a new firmware, in this case EMUI8? Though I haven't found a boot.img file when I extracted the update.app file. Even if I shouldn't use Multi-Tool can I extract the update file with Huawei Extractor and then flash everything with fastboot commands?
I can't access erecovery because in the past I have flashed something there (that's why I was looking for a EMUI5 firmware, so I could restore the stock recovery), I can only access fastboot&rescue mode, when I tried updating the OS from the phone itself (I had an update that said it includes May 2018 security patches) it rebooted to an error message. I have everything unlocked in this phone.
Hi Guys, so we got a pilot release for MIUI 13. Here is the guide to flash/update using Xiaomi.eu ROM:
Update to MIUI13 (Android 12) from MIUI EU V12.5
A TWRP backup of current rom is recommended before following the next steps
You can follow my guide to know how you do it here: https://forum.xda-developers.com/t/...-flash-twrp-root-device-flash-eu-rom.4402203/
Download Fastboot EU rom from here: https://sourceforge.net/projects/xi...13.0.1.0.SKDMIXM_v13-12-fastboot.zip/download
Extract all the contents in zip file to any normal folder
We will be using Bootloader/Fastboot mode. Boot into Bootloader: Power off your mobile then hold Volume Down + Power Button till Fastboot bunny pops up
Connect your device to PC
To update use the updater executable for respective OS platform windows_fastboot_update_rom.bat (for windows)
For clean flash you can use windows_fastboot_first_install_with_data_format.bat (for windows)
Follow the procedures as per above choice
Wait patiently while the PC does its Job.
You may see a long pause post “writing Cust” command depending on PC configuration. try hitting any letter key on your keyboard, the process continues this way.
You may hit letter key whenever you see unusual pauses during pushing of super partition file sparse sending 1 of 9 to 9 of 9
Wait till process finishes and reboots
Flash Magisk and Root
Copy boot.img from the extracted ROM images folder to your mobile
Global Boot.img (use this if you wanna root Globoal Miui13.
Install latest Magisk app from here: https://github.com/topjohnwu/Magisk/releases/download/v24.1/Magisk-v24.1.apk
Install the app and select install in Magisk and choose patch source file and select the boot.img you copied.
Wait for the process, copy the new patched image form mobile to your PC
Now lets flash the new pathced boot image using below, replace with path to boot image in place of “< --- >”
fastboot flash boot_a “<magisk_patched.img>”
fastboot flash boot_b “<magisk_patched.img>”
Reboot and check the magisk app
Follow my guide here to pass safteyNet: https://forum.xda-developers.com/t/...-flash-twrp-root-device-flash-eu-rom.4402203/
Update to miui 13 can't flash via twrp?
Yuditkiichi said:
Update to miui 13 can't flash via twrp?
Click to expand...
Click to collapse
Only the stock global rom is for recovery, xiaomi.eu rom is for fastboot.
I can boot the twrp.img, but I can't navigate in the main menu. It won't do anything
dandris86 said:
I can boot the twrp.img, but I can't navigate in the main menu. It won't do anything
Click to expand...
Click to collapse
Probably twrp is not yet compatible with the new android 12 firmware, some users also reported the same problem.
sushuguru said:
Probably twrp is not yet compatible with the new android 12 firmware, some users also reported the same problem.
Click to expand...
Click to collapse
Thanks for the quick reply
I'm updated whiteout format data. Everything looks ok.
Alright, so I was previously rooted on 12.5 (global), non twrp. its not necessary for rooting.
I did the ota update to v13 miui (global). but as its a switch between v11 and v12 of android its not possible to install magisk into an empty a/b slot.
I tried to fastboot flash your global miui boot.img after patching it with magisk and it did not work.
I suspect the boot.img to not be compatible with the global rom.
So I opted to flash the Eu fastboot version of miui 13, I set up the phone.
Then patched the stock boot.img with magisk and fastboot that. Done phone is now rooted on v13 miui. and passing safety net check.
phone data was lost as i had to switch from global to eu.
Can anyone confirm that we get widgets and other features that are not found in the miui 13 global I want to make the switch but I want to know what would still be missing
The global fastboot rom is now released. follow same steps above to have rooted global non twrp.
V13.0.1.0.SKDMIXM (https://xiaomifirmwareupdater.com/miui/vili/stable/V13.0.1.0.SKDMIXM/)
-Edit-
Ive also updated to the latest via ota V13.0.2.0.SKDMIXM (Stable beta). but as it detected the boot.img was modified it downloaded the entire recovery rom. Installed. Lost root access.
I then fastboot re flashed the patched boot.img from the V13.0.1.0.SKDMIXM and it works.
so im rooted/ safetynet check passed on V13.0.2.0.SKDMIXM (Global)
roms can be found here https://xiaomifirmwareupdater.com/miui/vili/
Downloaded the latest EEU vili_eea_global_images_V13.0.8.0.SKDEUXM_20220224.0000.00_12.0_eea_38cc4dcea7.tgz
but the only .bat files I see are
flash_all.bat, flash_all_except_storage.bat and flash_all_lock.bat
BettlePimp said:
Downloaded the latest EEU vili_eea_global_images_V13.0.8.0.SKDEUXM_20220224.0000.00_12.0_eea_38cc4dcea7.tgz
but the only .bat files I see are
flash_all.bat, flash_all_except_storage.bat and flash_all_lock.bat
Click to expand...
Click to collapse
It's a fastboot stock rom which this flash with miflash or with bat files
This thread is about XIAOMI EU custom rom
This phone is so ****ty, I'm trying to do OTA update via 100mbit/'s network in netherlands from about two f***NG weeks and it can not be finished. I can't belive that I have paid 800€ for so big ****!
Hello
For the ROOT it works perfectly (without TWRP, just with magisk)
You unlock the bootloader and wait 1 week, you extract the boot.img, you modify the file with magisk and do the command wtih adb with the modified boot
Very simple
(If you want to extract the rom file by yourself you can just extract with a little tool after your download the rom
, you can extract the fil with the payloaf file, for that, just have a look in the method 3 in this link)
I've managed to revert from the LineageOS 17 back to stock firmware after a lot of trial and error. I had not been able to find anything on this site detailing this so in the spirit of giving back, here's what I did to revert back to stock firmware. I accomplished this on a BAH-L09.
TWRP must be installed. I did this with twrp_3.3.1-0.img.
Boot into recovery mode.
Grab this firmware: Huawei MediaPad M5 lite BAH-L09 hw ru BAH-L09C170B271CUSTC170D001Firmware7.0.0r1EMUI5.105014LUH [androidhost.ru].zip
Extract the multiple archives inside of the zip file (including the .tar) with 7-Zip until you have the Update.APP file.
Use the Huawei Firmware Update Extractor (HuaweiUpdateExtractor_0.9.9.5.zip). Drag the Update.APP file into the interface and extract all to a location.
(Note: This just hung at the end but I was able to use the resulting IMG files)
Copy VENDOR.img, SYSTEM.img, BOOT.img, RECOVERY.img to an SD.
In TWRP, install/flash the corresponding IMG files. RECOVERY is vital.
Wipe DALVIK/Cache.
Power off.
Restart again into Recovery, this time it will be EMUI/Huawei's recovery.
Factory Reset/Wipe; Wipe Cache.
Your tablet should now boot into stock firmware.
This is how I managed to get back into stock firmware. I attempted these steps with Huawei MediaPad M5 lite BAH-L09 hw eu BAH-L09C100B270CUSTC100D001 Firmware Android 7.0 EMUI 5.1 05014LSM [androidhost.ru].zip to no avail.
I hope these steps are helpful to anybody who requires the stock firmware. Don't forget that you can effectively unbrick your device this way if you can access fastboot and flash the recovery partition (fastboot flash recovery twrp_3.2.0-0.img).