Database Develop

[ROM]LineageOS 16.0 OFFICIAL [G2] d800/d801/d802/d803

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
NOTE: PLEASE ALSO READ ALL OF THE FAQ IN THE SECOND POST. IT COVERS MANY OF THE COMMON PROBLEMS AND QUESTIONS!DONT FLASH SUPERSU OR ANY OTHER MOD THAT EDIT BOOT IMG
LineageOS 16.0 is a free, community built, aftermarket firmware distribution of Android 9.x (Pie), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
* Submitting bug reports on nightly builds is the leading
* cause of male impotence.
*/
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
The source code for LineageOS is available in the LineageOS Github repo. And if you would like to contribute to LineageOS, please visit our Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Changelog:
Latest commits for kernel, g2, and device d800 | d801 | d802 | d803 specific (based on date) [by review.lineageos.org]
Requirements:
Custom recovery (Lineage Recovery, or TWRP 3.2.2 or above)
KitKat (KK) bootloader (included in the lg-devs LP bootstack)
KitKat (KK) bootstack minimum; Please read the entire FAQ for important bootstack information. Installation of bootstacks is NOT recommended.
Clean flash if coming from another ROM or CM 14/15
Recommended install method
Start from stock Lollipop Rom (flashing using KDZ method)
Root with One click root (other methods are not recommended)
Install TWRP with Autorec for Lollipop
Update TWRP to 3.2.3
Flash the Rom and Gapps
Works:
Audio
Bluetooth
Camera
GPS
Headphones
NFC
SIM
User storage
UI
Wi-Fi
FAQ, other information:
Please read on to the second post in this thread for more information and answers to some frequently asked questions. Please read through it as I will absolutely, positively, and unequivocably NOT offer any help or answers that are already provided in that post.
Changelog:
Code:
[B]27/03/2019:[/B]
* Official builds start
[B]31/01/2019:[/B]
* Memory optimizations
* Check if bootstack is compatible before flashing
* Cleanup
[B]04/01/2019:[/B]
* Fixed Camera issues
* Fixed Sensors issues
* Fixed Bluetooth failing to start
[B]16/12/2018:[/B]
* Enforcing selinux
* Fixed potential issues with sensors
[B]02/12/2018:[/B]
* Hotfix: fixed camera apps and possibly others FCing
* Also built Snap instead of Camera2
[B]01/12/2018:[/B]
* Merged android-9.0.0_r16
* Various lineageos updates, should be close to lineage 15.1 in terms of feature parity
* Added d801 variant
NOTE: It's been reported that dirty flash can cause a recovery loop (device only boots to recovery). Clean flash advised!
[B]05/10/2018:[/B]
* Various lineageos updates
* Also first d800 build
[B]06/09/2018:[/B]
* Updated to android 9.0.0_r9
* Boosted GPU performance for smoother UI (more at post [URL="https://forum.xda-developers.com/showpost.php?p=77545553&postcount=70"]#70[/URL])
[B]04/09/2018:[/B]
* Fixed USB OTG storage (FAT32 only for now)
* Updated lineage apps, fixing issues like Accent Color selection in Settings > Display >Style
* Added Ambient Display
* Build more lineage apps, like SetupWizard
[B]03/09/2018:[/B]
* Fixed an issue that caused bluetooth to crash when using gapps
[B]02/09/2018:[/B]
* Initial build
Download:
D800 - download.lineageos.org/d800
D801 - download.lineageos.org/d801
D802 - download.lineageos.org/d802
D803 - download.lineageos.org/d803
SU - https://download.lineageos.org/extras
Note to users: I'm not responsible if you brick your phone. See the disclaimer above.
If this thread is inappropriate, please move/delete it.
Thanks to These People:
@YoDevil
@Kapricornus
@qwertyu123
Everyone of LineageOS Devs
LG Devs
@dr4stic for thread(copied from him)
XDA:DevDB Information
LineageOS, ROM for the LG G2
Contributors
qwertyu123, YoDevil, Kapricornus
ROM OS Version: 9.x Pie
ROM Kernel: Linux 3.4.x
ROM Firmware Required: Kitkat bootloader (bump)
Version Information
Status: Stable
Created 2018-09-02
Last Updated 2019-09-14

People have been reporting issues when dirty flashing over Oreo, make sure you know how to recover if you attempt to dirty flash

Say thanks to @YoDevil who prepared the rom and fixed most of the initial issues on the g2!

Great job guy's! Big thanks! My first job at the morning will be to test the rom! ??

qwertyu123 said:
Say thanks to @YoDevil who prepared the rom and fixed most of the initial issues on the g2!
Click to expand...
Click to collapse
Fantastic news !!!
Many thanks to the entire Developer's Team. Special thank to @YoDevil for this ROM.
BTW I guess the answer is yes... but is clean flash required when coming from the unofficial LOS 15.1 version ?
Thanks again !

Hey, that is incredible , what this phone can run ? Thanks @YoDevil! Is it safe to flash over 15.1 or better wipe all?

We didn't comment it, although the rom works well, it might not be for daily use (or maybe yes!). It is quite untested and many Lineage features are still missing.
You can dirty flash if you want to try, but as usual a clean flash is recommended. So take your own safety measures before flashing. Backup, etc...

popxunga said:
is clean flash required when coming from the unofficial LOS 15.1 version ?
Click to expand...
Click to collapse
lakyljuk said:
Is it safe to flash over 15.1 or better wipe all?
Click to expand...
Click to collapse
You try and tell me. There's a fair chance it'll work just fine dirty flashing

lakyljuk said:
Hey, that is incredible , what this phone can run Thanks @YoDevil! Is it safe to flash over 15.1 or better wipe all?
Click to expand...
Click to collapse
Clean flash

YoDevil said:
You try and tell me. There's a fair chance it'll work just fine dirty flashing
Click to expand...
Click to collapse
Great ! Will try it...
Is there any gapps 9.0 version available somewhere ? Or will the 8.1 version of gapps work fine ?
Same question applies to LOS su add-on. There's not 16.0 version on LOS Extra downloads section.

Testing it. Clean flash.
Style and expanded desktop crashes, can not acces trust menu from settings, there is no option, but it can from the notification.
Otherwise excellent rom. Major things work excellent.
Thank you devs
This is incredible !!!!

New build up (03/09/2018)
* Fixed an issue that caused bluetooth to crash when using gapps

Flash it over Lineage os 15.1 last build then the Lineage Boot Logo comes like 5 minutes and then device reboot to recovery
after trying to reboot to system again enter recovery directly
after that i wiped Dalvic / ART Cash , System , Data and cash then flash it and so flash Open GApps mini unofficial and reboot after finish and again enter recovery directly without Lineage boot logo
at that point i decide to go back to my last backup and after restore it again my device boot directly to recovery
please help me how to mange to solve this situation ???

eL3sili said:
Flash it over Lineage os 15.1 last build then the Lineage Boot Logo comes like 5 minutes and then device reboot to recovery
after trying to reboot to system again enter recovery directly
after that i wiped Dalvic / ART Cash , System , Data and cash then flash it and so flash Open GApps mini unofficial and reboot after finish and again enter recovery directly without Lineage boot logo
at that point i decide to go back to my last backup and after restore it again my device boot directly to recovery
please help me how to mange to solve this situation ???
Click to expand...
Click to collapse
I think your only option is to zero the misc partition using dd commands on twrp terminal

qwertyu123 said:
I think your only option is to zero the misc partition using dd commands on twrp terminal
Click to expand...
Click to collapse
i did and nothing happens so now i mange to restore the phone to stock KDZ lollipop and try again flashing Lineage 16
my question now is this
can i restore my rom backups after installing twrp after kdz flash ???

eL3sili said:
i did and nothing happens so now i mange to restore the phone to stock KDZ lollipop and try again flashing Lineage 16
my question now is this
can i restore my rom backups after installing twrp after kdz flash ???
Click to expand...
Click to collapse
Yeah it is no problem to do that. (If your backups are not on the phone of course)

what about root ??

Usb otg doesnt work.
First build and audio is perfect. No stutters, nothing

gocegi said:
Usb otg doesnt work.
Click to expand...
Click to collapse
confirm OTG doesnt work

Looking forward for ls980!,BTW,I cannot reach Google drive :crying:,would you mind upload it on Android file host ?Thanks!

[ROM] [10.0.0] 家 BootleggersROM 4.7-Stable 家 [NO LONGER SUPPORTED!]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Bootleggers ROM is an aftermarket firmware based on AOSP with some patches and fixes from LineageOS and various other projects. The idea is to bring custom features and some of the most useful apps on your device, with the goal of Making you feel like 家.
With an almost stable source, this ROM is also packed with some custom wallpapers (avaliable on ShishuWalls), ringtones, fonts, and themes to bring to your device into a more fresh look and give you an excellent experience!
Also, we have our Telegram Group to talk about the ROM, share some love, ideas or even have fun with us!
This is my personal NugTowersHQ Telegram Group , 24/7 support specifically for Pixel devices.
Some of the features that are included on this ROM are:
Code:
* QS Rows and Colums
* Volume Keys: Wake up, skip tracks and switch according to rotation
* Show song album cover, visualizer and battery info on Lockscreen
* Power Menu Items
* Battery LED light settings
* Suspend Actions: Make your device disable GPS and switch to 2G when you're not using it
* AppOps: Manage your apps permissions in an advanced way
* Recent Styles: Dig the new Pie Quickstep recents, go back to the classic layout or use the Android Go layout
* Network icons: Show or hide the cross, switch between 4G or LTE, use the classic icon layout before Pie or toggle roaming icon too!
You can check out the full list of features available here.
Thanks to this people, this ROM could be possible, so, i have to give a big thanks to:
Code:
* Shishu (For being there)
* Ground Zero ROMs Team
* AOSPExtended
* ABC ROMs
* NitrogenOS
* AICP
* DirtyUnicorns
* Lukas Koller (Camera Roll dev)
* fxckingdeathwish (for the amazing photos for wallpaper/headers)
* OmniROM
* CyanogenMod/LineageOS
* PixelExperience
* PureNexus
* merothh
* Resurrection Remix
* AOSiP
* CrDroid
* CypherOS
* PureKat
* theimpulson
* MatiHalperin
* Project Xtended
* Pixeldust Project
* AquariOS
* Alejandro Ponce (Quetzal/Calypso dev)
* PixysOS
* The Memedo Testers team
* Every maintainer who decided to give our project a shot
* You for your interest on our project
Also if you have some ideas, bug fixes, stability improvements, or would like to help support features for your device, you can do it by sending a Pull Request on Bootleggers Github (check downloads and sources section) or tell us on our Telegram group (Check about us section), it will be really appreciated. Have some questions about some terms we use? Check our FAQ or feel free to ask us. We appreciate your feedback and help.
Downloads:
ROM
boot.img
How to flash:
Code:
- You must know how to use fastboot to flash the rom since there is no TWRP available yet. This will wipe your phone including internal storage.
- This build includes Gapps
- Download the ROM and boot.img
- Flash the boot.img via fastboot (code): fastboot flash boot boot.img
- Wipe user data (code): fastboot erase userdata
- Reboot into fastboot (code): fastboot reboot fastboot
- Use volume keys and power button to select Enter Recovery
- Select Update via ADB
Sideload the Bootleg ROM zip (code): adb sideload BootleggersROM-Queue4bonito.4.7-MadStinky-Unshishufied-20191114-023807.zip
- Boot into OS
Notes:
* Do NOT flash magisk/kernels/etc until AFTER first boot.
Device Sources:
Device tree
Kernel tree
Vendor tree
ROM Sources
Bootleggers Github​

#Reserved for announcements!
06/25/2019:
* If you are lucky enough to be on one of @ZVNexus early working builds of TWRP then I have included a flashable ROM zip in the Download section of the OP. I would assume the flashing instructions would go as follows but I cannot 100% confirm anything myself at the moment due to my T-mobile variant being carrier locked for the next 40 days. On Saturday I switched from VZW to T-mobile and their buyers remorse policy will not allow an unlock until after 40 days of service. Until then I am relying on my TG chat testers for feedback so please, ALL the feedback I can get is GREATLY appreciated!
07/09/2019:
* Well it seems that @ZVNexus has a fully working version of TWRP in version 3.3.1-4. As before I have provided a flashable ROM zip for TWRP and also the images for a manual flash. This build includes Dank kernel now which is my personally maintained kernel. The features of Dank kernel include Kcal (advanced color control), Wake gestures from @flar2 , and HBM (high brightness mode). I do not upstream my kernel because I am a noob and I trust google to fix any conflicts that may occur when upstreaming more than myself. This update brings the July security update on the ROM and device side and a few bugs worked out with translation.
07/17/2019
* Yes! I very kind T-mobile associate unlocked my bootloader for me via twitter DM's. Anyone with T-mobile I highly suggest using this method for customer service in general! Let the games begin!
*** Special thanks to @MVNO DeSIngS for testing my blind builds! ***
FLASHING INSTRUCTIONS FOR TWRP (maybe) lol :
1. Make sure you are coming from a clean install of the latest 9.0.0 factory image from google with TWRP installed. (backup any important data to an external source)
2. Wipe data, System and Dalvik/ ART ccache.
3. Flash ROM
4. Flash twrp installer zip
5. Boot into OS.... Enjoy! (Remember Gapps are included so no worries about that and NEVER flash magisk or third party kernels until AFTER first boot and setup!)
11/16/2019
* This is the initial build of Bootleggers ROM for Android 10. MOSTLY ALL FEATURES ARE MISSING. Relax, good things are coming! Make sure to pay close attention to the install instructions as they have changed from PIE. Enjoy!

glad i was able to test it out .

stebomurkn420 said:
#Reserved for announcements!
06/25/2019:
* If you are lucky enough to be on one of @ZVNexus early working builds of TWRP then I have included a flashable ROM zip in the Download section of the OP. I would assume the flashing instructions would go as follows but I cannot 100% confirm anything myself at the moment due to my T-mobile variant being carrier locked for the next 40 days. On Saturday I switched from VZW to T-mobile and their buyers remorse policy will not allow an unlock until after 40 days of service. Until then I am relying on my TG chat testers for feedback so please, ALL the feedback I can get is GREATLY appreciated!
*** Special thanks to @MVNO DeSIngS for testing my blind builds! ***
FLASHING INSTRUCTIONS FOR TWRP (maybe) lol :
1. Make sure you are coming from a clean install of the latest 9.0.0 factory image from google with TWRP installed. (backup any important data to an external source)
2. Wipe data, System and Dalvik/ ART ccache.
3. Flash ROM
4. Flash twrp installer zip
5. Boot into OS.... Enjoy! (Remember Gapps are included so no worries about that and NEVER flash magisk or third party kernels until AFTER first boot and setup!)
Click to expand...
Click to collapse
TWRP is now released.

ZVNexus said:
TWRP is now released.
Click to expand...
Click to collapse
Awesome! Thank you so much for all the work you are doing for our device! I will take a look at your thread and update the install instructions accordingly.
P.s. I've been stalking your github. Seems you are a night owl like meeee. Lmao

Are there any users that might be able to compare it to DU experience? Does it have further customization? Or just different?

jcrompton said:
Are there any users that might be able to compare it to DU experience? Does it have further customization? Or just different?
Click to expand...
Click to collapse
yes it does have more customization then du this rom has all the things you may need all in one several themes you can choose from fonts navbar settings a whole lot i have been testing it for quite some time i give props to the dev since he made this possible.

Can I use swift installer with this?

GQJ said:
Can I use swift installer with this?
Click to expand...
Click to collapse
Yes but please do not report any issues after doing so as we do NOT recommend using third party software.

GQJ said:
Can I use swift installer with this?
Click to expand...
Click to collapse
Whats swift installer?

A theming engine for settings, some Google and third party apps.

It says Pixel 3 XL (crosshatch) in the link?

GQJ said:
It says Pixel 3 XL (crosshatch) in the link?
Click to expand...
Click to collapse
Ignore it. Afh doesn't have our device to choose from yet.

Thanks for the ROM. I flashed the zip through TWRP and all seems good so far :good:

Bob nesta said:
Thanks for the ROM. I flashed the zip through TWRP and all seems good so far :good:
Click to expand...
Click to collapse
Very nice! Thanks for the feedback...

Don't have my 3a XL yet, but plan on flashing this as soon as I get it. Link to the flashable zip goes to the system.img file, and on the 3a non-XL page it points to an actual zip. Intended?

stompysan said:
Don't have my 3a XL yet, but plan on flashing this as soon as I get it. Link to the flashable zip goes to the system.img file, and on the 3a non-XL page it points to an actual zip. Intended?
Click to expand...
Click to collapse
Yeah...that link needs an update.
Here's the link for the zip... https://androidfilehost.com/?fid=6006931924117902739

Checking in and asking people who would like to test to follow the link I provide. It seems that the installs are working fairly well with TWRP now so I will continue to add both flashable twrp version of the ROM and the images for fastboot. The following link is me experimenting with our kernel source. I have decided to stick with a pure AOSP base without the upstream mainly because I trust google more than myself to clean up conflicts. This link will always stay the same as the builds are updated.
Bootleggers ROM Test Builds for Bonito: https://drive.google.com/folderview?id=16sV8KULhC_rXh3WPCGXfwWhprbGeadyq

Bob nesta said:
Yeah...that link needs an update.
Here's the link for the zip... https://androidfilehost.com/?fid=6006931924117902739
Click to expand...
Click to collapse
*FIXED*

Thanks for this Rom!
But what is the proper procedure for updating the Rom via twrp without losing data? When I tried to flash the .zip, it seemed to work, but upon reboot, it booted to pixel recovery.
Sent from my Pixel 3a XL using Tapatalk

[ROM][10.0.0_r40][FP][UNOFFICIAL] MSM-Xtended [FAJITA]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
​
Code:
* Disclaimer
* We're not responsible for bricked devices, dead SD cards, thermonuclear war,
* or you getting fired because the alarm app failed. Please do some research
* if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you blame me in any way for what happens to your device, I will laugh at you.
* BOOM! goes the dynamite
*** Ohh Really we need to introduce! . We team "MSM Xtended" are here with new era of Android. We have tried our best to blend it with all available options, features and stability of different ROMs in to one for better user experience.***
​
HERE​
@mukesh22584
@SuperDroidBond
@mady51
@Roger.T
@anishpratheepan
@xawlw
@mcdachpappe
@svandasek
@Jay_B
@Ded_Boi
​
If you like our work you can buy us a cup of coffee
*SuperDroidBond
*Ashutosh Sundresh
​
FAJITA Support Group
MSM-Xtended Public Group
MSM-Xtended Update Channel
MSM-Xtended Website
MSM-Xtended Blog
​
ROM DOWNLOAD
GApps Download
MicroG
**If you use GApps, it's recommended to flash Nano GApps only for better user experience.**
​
Clean Flash
0. MAKE SURE YOU REMOVE ALL PASSCODES IN YOUR EXISTING ROM.
1.BOOT INTO TWRP. FORMAT DATA.
2.MAKE SURE YOU'RE USING ONLY TWRP or SHRP
3.FLASH OOS 10.3.x IN TWRP
4.FLASH TWRP INSTALLER
5.REBOOT TO RECOVERY
6.FLASH OOS 10.3.x IN TWRP AGAIN TO MAKE SURE ITS ON BOTH SLOTS
7.FLASH TWRP INSTALLER
8.REBOOT TO RECOVERY
9.FLASH CUSTOM ROM
10.WIPE DATA AND CACHE
11.FLASH TWRP INSTALLER
12.REBOOT TO RECOVERY
13.FORMAT DATA. FLASH CUSTOM ROM
14.FLASH TWRP INSTALLER
15.REBOOT TO RECOVERY
16.FLASH MAGISK CANARY, GAPPS AND ANY OTHER MODS
MSM-Xtended has prebuilt TWRP Black by Acuicultor and Morphine.
You may skip the steps installing TWRP.
DO NOT EVER WIPE SYSTEM OR VENDOR ON THE OP6T!
Dirty Flash
0.WIPE CACHE
1.FLASH CUSTOM ROM
2.REBOOT TO RECOVERY
4.FLASH MAGISK and GAPPS(optional)
DO NOT EVER WIPE SYSTEM OR VENDOR ON THE OP6T!
**If you fail to follow these instructions, please don't bother reporting any bugs**
**If you use Xposed, please don't bother reporting any bugs**
**If you use another kernel, please don't bother reporting any bugs**​
MSM-Xtended Sources
Kernel Source
​
We would like to give thanks to everyone in the Android community, big or small.
That said, we would like to Thank all These Teams for their contribution to the Open Source Community.
* LineageOS/Cyanogenmod
* GZOSP
* ColtOS Team & Specially @Rakesh.Batra
* OmniROM
* Nitrogen OS
* AICP
* crDroid
* DirtyUnicorns
* Screwd AOSP
* CypherOS
* Liquid Remix
* Benzo ROM
* BootLeggers ROM
* AOSP Extended ROM
* Syberia-Project
* PixelDust Project
* Pixel Experience
​
XDA:DevDB Information
MSM-Xtended, ROM for the OnePlus 6T
Contributors
Ashutosh Sundresh
Source Code: https://github.com/Ashutosh-s-Test-Dumpster/shapeshift_kernel_op6-t
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
ROM Firmware Required: OOS 10.3.x
Based On: AOSP
Version Information
Status: Stable
Created 2020-08-04
Last Updated 2020-08-06

cmurder61 said:
Hey, New Fajita owner here. Would i have to flash oos if coming from t-mobile stock 10.3.3 ? Phone has no modifications and is new out the box
Click to expand...
Click to collapse
You can't use any custom roms without first converting your TMobile 6t to an international/global model and unlocking bootloader... Etc etc .
See: https://forum.xda-developers.com/oneplus-6t/how-to/t-mobile-6t-to-international-t3888307
Also there's a thread dedicated to rom installation in guides section that's helpful. Once your converted and update your OOS to latest (10.3.5) and your bootloader is unlocked, you can then install custom recovery aka TWRP and follow installation directions from the op here. (original post) Hope that helps.

cmurder61 said:
Hey, New Fajita owner here. Would i have to flash oos if coming from t-mobile stock 10.3.3 ? Phone has no modifications and is new out the box
Click to expand...
Click to collapse
After you convert it with the above guide. check this one for unlocking and rooting. Very detailed
https://forum.xda-developers.com/oneplus-6t/how-to/guide-oneplus-6t-unlock-bootloader-t3851789

Awesome

Of course, before anyone asks. Here are the screenshots:

Wuuurd

Ashutosh Sundresh said:
Of course, before anyone asks. Here are the screenshots:
Click to expand...
Click to collapse
I install the rom , but when reboot to system it only shows bootanimation some seconds and turns off the phone, it never starts. What am I doing wrong?

castanedajor said:
I install the rom , but when reboot to system it only shows bootanimation some seconds and turns off the phone, it never starts. What am I doing wrong?
Click to expand...
Click to collapse
Explain more in detail what it is you are doing installation wise. What are you wiping specifically? What recovery version and which exact to TWRP are you using? More details more help...

I'm glad you picked this one. Hope to see a lot more from you.

Installed and set up fine. Passes safetynet out of the box. Other feature packed ROMs tend to have gapps preinstalled. Thank you for not including that. I like my gapps stack light.

Cablespider said:
Installed and set up fine. Passes safetynet out of the box. Other feature packed ROMs tend to have gapps preinstalled. Thank you for not including that. I like my gapps stack light.
Edit: Odd. I had it all setup and running fine then it just quit boooting. Not sure what's up with that.
Click to expand...
Click to collapse
Same here, I switched kernels and it seemed to fix the problem.
But before I switched I noticed that the colors looked muted. Anyone else noticing the dullness of the colors?

Everytime I try to setup my fingerprint the phone crashes and the systemui reboots. Does anyone else have this problem or should I redownload and reflash?

castanedajor said:
I install the rom , but when reboot to system it only shows bootanimation some seconds and turns off the phone, it never starts. What am I doing wrong?
Click to expand...
Click to collapse
Try to plug your charger and reboot. It schould work.

New build up! Hit that thanks button.
This build mainly fixes problems with the initial build.
Fixes:
Fixed booting for some devices
Fixed an issue where device won't boot if it isn't plugged in
Fixed FOD causing a SystemUI crash
Fixed a crash in Ambient Display options
Fixed FOD animations not working
Fixed FOD icon being blank
Note: Please use the wide display configuration in OnePlus Settings if you feel the display colours are washed out. A clean flash is recommended.
Happy flashing!

Does this rom support system wide app locker and is parallel space like feature build in this rom?

Best rom for OP6T atm!
Sent from my OnePlus6T using XDA Labs

@Ashutosh Sundresh Thanks for building this ROM for the 6T! I have a just have a couple of questions.
1. Do you think you'll apply for Official?
2. What do you think the release schedule for new builds will be?
I've heard good things about this ROM, great job man!

Misuto said:
@Ashutosh Sundresh Thanks for building this ROM for the 6T! I have a just have a couple of questions.
1: Do you think you'll apply for Official?
2: What do you think the release schedule for new builds will be?
I've heard good things about this ROM, great job man!
Click to expand...
Click to collapse
1. Yes
2. Monthly or if there is a build required for some issue

Ashutosh Sundresh said:
1. Yes
2. Monthly or if there is a build required for some issue
Click to expand...
Click to collapse
Good to hear :good:

@Ashutosh Sundresh
First off, thanks for being a developer for this great ROM and great phone!
Just a couple things I have noticed after installing this ROM
1. When going to the updater it just crashes the settings.
2. Even after changing the screen color from MSM settings and OnePlus settings it still looks washed out.

rageyoudown said:
@Ashutosh Sundresh
First off, thanks for being a developer for this great ROM and great phone!
Just a couple things I have noticed after installing this ROM
1. When going to the updater it just crashes the settings.
2. Even after changing the screen color from MSM settings and OnePlus settings it still looks washed out.
Click to expand...
Click to collapse
Hi there!
1. Updater crashes, because it's not implemented until the rom becomes official. (Probably we don't have to wait long for that)
2. On my end i see a difference, if i change panel modes.
Try wide color mode.
Sent from my OnePlus6T using XDA Labs

Stogie87 said:
Hi there!
1. Updater crashes, because it's not implemented until the rom becomes official. (Probably we don't have to wait long for that)
2. On my end i see a difference, if i change panel modes.
Try wide color mode.
Click to expand...
Click to collapse
Same on my 6t.
The only thing I wish MSM had is smartbar. Roms I know that have it on 6t are Havoc (no maintainer anymore), AOSiP, PiXeN and Corvus. Just sharing my opinion is all. This is an awesome beast of a rom and it's very beautiful!!! Awesome job on the 2nd ever build!!!!! ? I love the option to have random colors all over. Super bad ass!!
Smartbar:
Not directed at any user in particular just a sidenote for anyone who may not know what smartbar is.. In Android pie/9 DU member BRD made something called DUI and it was/is pulse, fling and smartbar. Smartbar is the option to set your nav buttons, back, home and recent to long press or double tap and go to an app of your choice or an action or any other setting on your device. We used to be able to add extra keys on pie but I don't believe that's the case on Android 10. Just a heads up for what smartbar is in case there's anyone who may not have known. Thrilled that smartbar has now been ported to Android 10 along with pulse and fling!

[ROM][11][OnePlus6][OFFICIAL]Syberia Project

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
/*
* Your warranty is now void.
*
* Syberia Team not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications.
*/
Read the whole OP! Be respectful to each other and don't ask for ETAs, it's considered as being rude!
Syberia Project (aka Syberia OS) is a custom ROM for Oneplus 6 (enchilada) that implements various features. This project was designed by our "Syberia Team" from scratch based on AOSP source code with some CAF fixes and improvements. Our team: @DennySPB, @blinoff82, @alexxxdev. Also many thanks to our designers @rlshukhov and @a18h for logos, wallpapers and bootanimations.
If you like our work you can buy us a cup of coffee or a glass of beer
Here
Code:
OTA support
Inbuilt TWRP
VoLTE, VoWiFi
LineageOS LiveDisplay
MicroG support
Omnijaws weather
Face unlock feature
WFD (Miracast)
Gaming mode
Call recording
Custom lockscreen clocks
Dt2s on statusbar and lockscreen option
QS columns count configurable
HW Key customization
Lockscreen quick unlock
Volume key cursor control
Prevent accidental wake-up
Statusbar battery customization
Wake up on charge
Pulse flash on incoming call
Battery light customization
In-call vibration options
Screen-off animations
Live volume steps
Statusbar items switches
Statusbar network traffic
Transparent notifications on lockscreen
Three finger swipe to screenshot
Power button torch
Double tap gestures
Extended powermenu
Playback control
Lockscreen visualizer
Volume rocker wake
VoLTE and VoWiFi icons support
Custom system animations
Themes support
Accent colors
Fonts support
Icon shape support
Screen Record
ExFat and NTFS support
...Settings and features will be gradually added.
SyberiaOS ROM Download
Flame Gapps Download (recommended)
OpenGapps
Latest TWRP recovery Download
Latest official Magisk
Updating from Syberia OS Android 10.
Code:
- Install latest TWRP
- Flash ROM
- Reboot from TWRP to TWRP again for slot change
- Flash recommended Gapps (you can use OpenGapps at your own risk)
- Flash recommended Magisk (you can use the official one at your own risk)
- Wipe DATA!!!
- Reboot into system
- Complete first setup
- Reboot to TWRP and flash Magisk again.
- Reboot into system.
Updating from previous Android 11 build.
Code:
- Reboot to TWRP
- Flash ROM
- Reboot to TWRP again
- Flash recommended Gapps (you can use OpenGapps at your own risk)
- Flash recommended Magisk (you can use the official one at your own risk)
- Wipe cache
- Reboot
Code:
- Stock cam crashes sometimes
Official website
Syberia Project Github
Syberia Project Gerrit
Syberia Project Kernel Source
Official Telegram Group
Announcements Telegram Group
Development Telegram Group
Code:
- LineageOS
- PixelExperience
- AOSPA (aka Paranoid Android)
- Nitrogen Project
- Benzo Rom
- Dirty Unicorns
XDA:DevDB Information
[ROM][11][OnePlus6][OFFICIAL]Syberia Project, ROM for the OnePlus 6
Contributors
blinoff82, DennySPB
Source Code: https://github.com/SyberiaProject-Devices/platform_kernel_oneplus_sdm845
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
ROM Firmware Required: OOS Latest
Based On: AOSP
Version Information
Status: Beta
Created 2020-09-25
Last Updated 2020-11-25

FAQ:​
Q: Safetynet cannot be passed.
A: Enable "Magisk Hide" option in Magisk Manager settings.
Q: Is it possible not to reinstall Gapps when updating ROM?
A: Yes, if you install NikGapps during the next update. This package have a backup script and you no longer need to reinstall it with every update. Download NikGapps

First

Well,
That was fast..

Wow. Wasnt expected this soon without critical bugs. Great.

blinoff82 said:
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
ROM Firmware Required: OOS Latest
Based On: AOSP
Version Information
Status: Beta
Created 2020-09-25
Last Updated 2020-09-25
Click to expand...
Click to collapse
Hey bro, look at ROM OS Version.. Thought I would say it before someone else does

Nice and smooth Rom. Only Magisk i cant give apps root access

Oh yeah, android 11 in title Rom version 10 in description.
May I assume correctly, there won't be any new updates for the stable 10 version with this eye candy but cumbersome Asus stitch?
Does this version has custom volume steps, or may I exspect this 9+10 feature within the next half of the future year?
OH, I forgot, does this room runs stable for weeks like the last 1/4 latest versions of 9 & & 10 or does it - as the straps 9 & & 10 versions - crash every then and there?

A small overview of this awesome ROM for people who want to know what to expect going forward.
*ROM is clean. Booting animation is syberia logo flashing from left and A11 during boot up.
* Launcher is quickstep launcher. Does what it is supposed to do.
* Magisk canary can be installed, doesn't pass safety net at first. Enable Magisk hide and safety net passes without problem.
* Power menu translations are broken for me. Power off is in English, while restart is in Russian.
* Magisk should be installed twice as mentioned in instructions.
I will be on this ROM for sometime so you can ask questions or want to test specific stuff, I will be glad to check it out.
Thank you to all devs for this awesome ROM.

k$kendsup said:
A small overview of this awesome ROM for people who want to know what to expect going forward.
*ROM is clean. Booting animation is syberia logo flashing from left and A11 during boot up.
* Launcher is quickstep launcher. Does what it is supposed to do.
* Magisk canary can be installed, doesn't pass safety net at first. Enable Magisk hide and safety net passes without problem.
* Power menu translations are broken for me. Power off is in English, while restart is in Russian.
* Magisk should be installed twice as mentioned in instructions.
I will be on this ROM for sometime so you can ask questions or want to test specific stuff, I will be glad to check it out.
Thank you to all devs for this awesome ROM.
Click to expand...
Click to collapse
Only updation available for Syberia ROM? If coming from other ROM, how can the installation?

crypta said:
Oh yeah, android 11 in title Rom version 10 in description.
Click to expand...
Click to collapse
When creating a new thread, i need to choose from the drop-down list version of Android. At the moment, the forum does not know that the 11th version appeared. There's only 10 on his list.

Root not work

Kmailknopf said:
Root not work
Click to expand...
Click to collapse
Working fine here

vikash1994b said:
Working fine here
Click to expand...
Click to collapse
Hmm OK.
Edit: unistall magisk and flash again and now works.

k$kendsup said:
A small overview of this awesome ROM for people who want to know what to expect going forward.
*ROM is clean. Booting animation is syberia logo flashing from left and A11 during boot up.
* Launcher is quickstep launcher. Does what it is supposed to do.
* Magisk canary can be installed, doesn't pass safety net at first. Enable Magisk hide and safety net passes without problem.
* Power menu translations are broken for me. Power off is in English, while restart is in Russian.
* Magisk should be installed twice as mentioned in instructions.
I will be on this ROM for sometime so you can ask questions or want to test specific stuff, I will be glad to check it out.
Thank you to all devs for this awesome ROM.
Click to expand...
Click to collapse
So, does this rom has custom volume steps?
And.. This is sadly only answerable within the next weeks.. How stable is it? The latest 9/10 syberiaOS got Rock stable. And in the end, stability got a very important factor to me.
Just getting the latest version, which falls back to the few features and stability of early syberiaOS is not a real improvement for me. It may be better with this 11,but after the experience with the early last 2 versions and owning just one device, I am not that eager to jump through the testing loops.

crypta said:
So, does this rom has custom volume steps?
And.. This is sadly only answerable within the next weeks.. How stable is it? The latest 9/10 syberiaOS got Rock stable. And in the end, stability got a very important factor to me.
Just getting the latest version, which falls back to the few features and stability of early syberiaOS is not a real improvement for me. It may be better with this 11,but after the experience with the early last 2 versions and owning just one device, I am not that eager to jump through the testing loops.
Click to expand...
Click to collapse
This is ofcourse the first release and for the first release it is stable enough. I can carry out basic functionality which doesn't hamper the basic use of phone. Customisation will take time to get implemented. For people who want complete stability, better wait for later versions and stay on A10 for now.

Hi!
Thank you very much for the ROM.
My experience, I have installed the ROM in a different way, because I use the Zip to not encrypt the phone.
1 Install OOS 10.3 + twrp 3.3.1-18 reboot recovery 2 Installed OOS 10.3+ twrp 3.3.1-18 and Reboot twrp
3 Install syberian 11+ twrp.
4 Reboot twrp, install gapps + magisk module + No_verity_mod_for_OP6 Android_10_Compatible.zip.
Magisk work fine. fast and fluid, very good color saturation. Bluetooth with my Garmin phoenix 5 plus fine. the only thing that does not have dual sim ring tone.
The gestures on the screen work fine, the gesture to return to home does not work
Thank you very much for this fantastic ROM!View attachment 5104927
Enviado desde mi ONEPLUS A6000 mediante Tapatalk

crypta said:
So, does this rom has custom volume steps?
And.. This is sadly only answerable within the next weeks.. How stable is it? The latest 9/10 syberiaOS got Rock stable. And in the end, stability got a very important factor to me.
Just getting the latest version, which falls back to the few features and stability of early syberiaOS is not a real improvement for me. It may be better with this 11,but after the experience with the early last 2 versions and owning just one device, I am not that eager to jump through the testing loops.
Click to expand...
Click to collapse
Dont compare last versions of a10 to first release of a11. Of course is not the same and will change a lot with the time until it will be really stable. First we need to get OOS 11 to get custom a11 roms stable. Some apps is still not updated to support a11 because of its very early stage

Great rom. And very stable. I haven't found any major bugs. Navigation gesture bar has a bit of problem sometimes it gets stuck in a position while switching to landscape to portrait.

sanjay parmar said:
Great rom. And very stable. I haven't found any major bugs. Navigation gesture bar has a bit of problem sometimes it gets stuck in a position while switching to landscape to portrait.
Click to expand...
Click to collapse
Can you confirm if Alart Slider is working as it intended..
Like Top Position for Total Silence
Middle for Vibrate only
& Bottom for Normal

[ROM][Pixel 3 XL][13.0.0_r8] PixelDust Android 13 for crosshatch [5 October 2022]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PixelDust ROM is an Android 13 ROM based on the source code of the AOSP with all the official Pixel features.
Furthermore we're adding a minimal selection of the coolest custom ROM features that might have been missing if they weren't included.
Special shoutouts to Roger.T for his amazingly designed wallpapers, logos and an amazing bootanimation! If you like our work, please consider to buy Roger the first beer, and a few cups of coffee for spezi77. Cheers!
Help us help you!
If you find a bug in one of our builds, please report it here or in our Telegram Group. You MUST include the following when posting a bug report:
1. A logcat or last_kmsg
2. Kernel and mods used
3. Useful information (which build, steps for reproduction, screenshots, etc.)
If you fail to report something adequately, DO NOT expect things to be fixed.
Disclaimer:
If your device fails to comply with your standards of what you consider functioning, I am not liable. This is provided free of charge and does not come with a warranty. Although, if you provide a log, I can provide some sort of assurance that I will look into your issue.
* Periodic AOSP security updates
* Pixel GApps included (no need to flash any third party GApps)
* Safety net / banking and payment apps work out of the box (no need to root)
Pixel 3 features
* Smartspace/weather info on lockscreen
* Now playing support
* Gaming Dashboard
* Quick tap
* Adaptive connectivity
* 24h battery usage stats / Battery estimates
* Onehanded mode
* Battery level on bottom
* Show bluetooth battery level
Enhanced Pixel features
* Free and unlimited Google photo storage (in original quality)!
* ActiveEdge customization (powered by kdrag0n's Elmyra service)
* Allow recording of system audio when screen recording
* Allow to switch usage stats from last full charge & for past 24h hours
UI customisation
* First-class Repainter support without root
Lock screen
* Show Ambient instead of lock screen on wake gestures
* Double tap to sleep on lock screen
Security
* Lock screen quick unlock
* Lock screen option to scramble PIN
PixelDust wallpapers
* A set of 22 breathtaking space themed Wallpapers
* VoWifi not working
* You tell me
Terms & conditions:
By downloading this custom ROM you agree that I, the developer of PixelDust ROM, am not liable in any way, shape or form for any damage done to your device. The PixelDust ROM is provided free of charge and does not come with a warranty.
Download PixelDust ROM: https://download.pixeldust-project.com/PixelDust-Tiramisu-aosp-crosshatch-user-20221005-0744.zip
Download boot.img: https://download.pixeldust-project.com/boot_aosp_crosshatch_10_22.img
Download TWRP (twrp-3.6.2.11-0) : https://twrp.me/google/googlepixel3xl.html
Home Page - PixelDust
Welcome to the official PixelDust website. All future downloads and new will be posted here!
pixeldust-project.com
Telegram Discussion Channel: https://t.me/pixeldustcommunity
Telegram Announcements Channel: https://t.me/pixeldustproject
Telegram Build Support Channel: https://t.me/compile_pixeldust
If you like our work then please consider donating.
PayPal: https://www.paypal.me/RogerTruttmann | https://www.paypal.me/spezi77
Who last donated:
Tengku Azwan Bin Mamat
Dominik Laignel
Simone Scanzoni
Elizabeth Laughlin
Pre-requisites:
* You are familiar with helping yourself out of awkward situations. You won't defame or complain at the developer of this ROM for your misfortunes.
* You are familiar with using fastboot
* Before you are ready to flash this custom ROM, you have to install the latest factory image from October 2021
* Bootloader unlocked
* You have created a backup of your ROM & data
First time installing PixelDust ROM, or coming from another ROM:
YOU MUST HAVE an Android 12 FACTORY IMAGE FLASHED TO BOTH SLOTS BEFORE YOUR FIRST TIME INSTALLING ROM.
1. Flashing stock ROM / unlock bootloader (If applicable):
Follow these instructions: https://developers.google.com/android/images#crosshatch
Boot the stock ROM.
Don't setup any google account, don't add a screen lock. Just go to Settings > System > Developer options. Enable OEM unlocking.
You need to follow this guide to unlock your bootloader.
2. There are now two options for the installation. Either via TWRP or via Sideload (for advanced users).
A. Flashing PixelDust ROM via TWRP:​​
Download the ROM and both TWRP files (img + zip) (for download links see above).
Boot fastboot mode.
Connect the phone to the Computer with USB cord.
Copy twrp-3.6.2_11-0-crosshatch.img to the platform-tools folder or folder that has fastboot in it and rename it twrp.img.
Open a Command Prompt.
At the Command Prompt type and press enter.
Code:
fastboot boot twrp.img
If requested, swipe to allow modifications.
Tap "Wipe", then tap "Format data" and type yes to continue.
Copy the rom zip and twrp-installer-3.6.2_11-0-crosshatch.zip to your device.
Tap "Install", select the rom zip, tap "Add more Zips", select the twrp-installer.zip and Swipe Slider to install.
When install is successful tap on "Reboot", then tap on the first list item "System".
​
​
B. Flashing PixelDust ROM via sideload:​​
Download the ROM and boot image (for download links see above)
Boot fastboot mode
Connect the phone to the Computer with USB cord.
Flash the boot image (this allows stock recovery to flash unsigned rom zip)
Code:
fastboot flash boot boot_aosp_xxx.img
Wipe userdata (required for first PixelDust/Android 13 install)
Code:
fastboot erase userdata
Reboot into fastbootd
Code:
fastboot reboot fastboot
Use volume keys and power button to select "Enter Recovery"
Select "Apply Update from ADB"
Sideload the ROM zip
Code:
adb sideload PixelDust-Tiramisu-aosp-crosshatch-user-xxx.zip
Reboot
​
​
Dirty flashing PixelDust ROM (coming from a previous PixelDust A13 ROM):
Just skip the step "Format data" / "Wipe userdata"
AOSPA (https://github.com/aospa)
AOSP Extended (https://github.com/AospExtended)
ABC ROM (https://github.com/ezio84?tab=repositories)
CAF Extended (https://github.com/CAF-Extended)
CarbonROM (https://github.com/Carbonrom)
LineageOS (https://github.com/LineageOS)
crDroid (https://github.com/crdroidandroid)
DirtyUnicorns (https://github.com/dirtyunicorns)
Havoc OS (https://github.com/havoc-os)
Nitrogen Project (https://github.com/nitrogen-project)
OmniROM (https://github.com/omnirom)
Pixel Experience (https://github.com/PixelExperience)
Potato Open Sauce Project (https://github.com/PotatoProject)
ProtonAOSP (https://github.com/ProtonAOSP)
MSM-Xtended Team (https://github.com/Project-Xtended)
Superior OS (https://github.com/SuperiorOS)
Syberia Project (https://github.com/syberia-project)
And all the other Developers, Testers, Donators and Users.
GitHub - PixelDust-Devices/android_kernel_google_bluecross
Contribute to PixelDust-Devices/android_kernel_google_bluecross development by creating an account on GitHub.
github.com
XDA:DevDB Information
[ROM][Pixel 3 XL][13.0] PixelDust Android 13 for crosshatch, ROM for the Google Pixel 3 XL
Contributors
spezi77
Source Code: https://github.com/pixeldust-project-caf
ROM OS Version: Android 13
ROM Kernel: Linux 4.x
Based On: AOSP
Version Information
Status: Stable
Created 2021-02-02
Last Updated 2022-10-05

Screenshots

Changelog
2022-10-05
* Initial build
* Security patch level: 2022-10-05
* Based on AOSP tag: android-13.0.0_r8 (TP1A.221005.003)
Caution:
If coming from a previous A12 build or other ROM a clean flash is always recommended.

literally just installed the rom, rather painless process. wallpapers are superb. nice and quick navigating around screens very happy with this custom rom

Downloading now and flashing tonight. Good to see developers still working on this phone.

So weird, it installed fine but i don't have anything extra, it's basically just a plain pixel ROM without any mods...

ir0nb3rg said:
So weird, it installed fine but i don't have anything extra, it's basically just a plain pixel ROM without any mods... View attachment 5208191
Click to expand...
Click to collapse
Please try again. Follow the instructions. I hope it works for you on the second attempt.

spezi77 said:
Please try again. Follow the instructions. I hope it works for you on the second attempt.
Click to expand...
Click to collapse
I'll try again after work but I noticed that my build number is different than the one in the changelog which shows (RQ1A.210205.004)
Maybe the download file links to an older version?

Thanks, love this ROM. Most stable rock solid ROM with great battery life I have used. You guys rock!

spezi77 said:
Please try again. Follow the instructions. I hope it works for you on the second attempt.
Click to expand...
Click to collapse
turns out, when i was flashing Factory image, i was using flash-all.sh but it only flashed the active slot. As soon as i flash both pixel Dust loaded perfectly. Great ROM so far! thanks to the devs.

Chrome and Android System Webview will not update. Other than that it's great and fast.
Edit: Finally got both to update. Had to click update all. Will not update one by one.

Just wanted to say thanks for the amazing ROM! Running great thus far! 1st custom ROM for me w/ Android 11! Great mix of features, gotta say it's nice seeing Face Unlock added back into a ROM, also it seems very snappy and smooth so far! Magisk stable running smoothly.

pahlerc1 said:
Just wanted to say thanks for the amazing ROM! Running great thus far! 1st custom ROM for me w/ Android 11! Great mix of features, gotta say it's nice seeing Face Unlock added back into a ROM, also it seems very snappy and smooth so far! Magisk stable running smoothly.
Click to expand...
Click to collapse
You used Magisk stable release to get root? I thought Canary was required for 11?

mgp53 said:
You used Magisk stable release to get root? I thought Canary was required for 11?
Click to expand...
Click to collapse
Yeah Magisk stable works. I haven't looked at changelog if you want to go view that to see what the differences are. But I've been using Magisk stable for January and Feb google ROMs

Guys, are you getting a lag when opening/closing the notification shade? The rom works amazing otherwise and no lag anywhere else whatsoever. Love all the customization features!

nithin suresh said:
Guys, are you getting a lag when opening/closing the notification shade? The rom works amazing otherwise and no lag anywhere else whatsoever. Love all the customization features!
Click to expand...
Click to collapse
yes same in bluelune in all A11 builds.. can't use the rom like that here unfortunately

nithin suresh said:
Guys, are you getting a lag when opening/closing the notification shade? The rom works amazing otherwise and no lag anywhere else whatsoever. Love all the customization features!
Click to expand...
Click to collapse
you can try this one... see if it fixes it?
[ROM][Pixel 3][13.0.0_r8] PixelDust Android 13 for blueline [5 October 2022]
PixelDust ROM is an Android 13 ROM based on the source code of the AOSP with all the official Pixel features. Furthermore we're adding a minimal selection of the coolest custom ROM features that might have been missing if they weren't included...
forum.xda-developers.com

FcukBloat said:
you can try this one... see if it fixes it?
[ROM][Pixel 3][13.0.0_r8] PixelDust Android 13 for blueline [5 October 2022]
PixelDust ROM is an Android 13 ROM based on the source code of the AOSP with all the official Pixel features. Furthermore we're adding a minimal selection of the coolest custom ROM features that might have been missing if they weren't included...
forum.xda-developers.com
Click to expand...
Click to collapse
Ah, thanks a ton! Fixed the lag for me.
Setting "min CPU frequency" of "Cluster 1" in EX Kernel Manager (Little cluster in Franco) to 652MHz instead of 300.
Edit: Lag is back again Did fix it for sometime but it keeps coming back.

nithin suresh said:
Ah, thanks a ton! Fixed the lag for me.
Setting "min CPU frequency" of "Cluster 1" in EX Kernel Manager (Little cluster in Franco) to 652MHz instead of 300.
Edit: Lag is back again Did fix it for sometime but it keeps coming back.
Click to expand...
Click to collapse
maybe you rebooted the phone meanwhile and cluster setting got lost?

FcukBloat said:
maybe you rebooted the phone meanwhile and cluster setting got lost?
Click to expand...
Click to collapse
I did enable the option to set it at boot - and tried a higher MHz too. But I guess that would have an effect on battery life..
Tough luck