Help Please.......
So I've owned sammy devices before in the past and never been afraid to flash custom kernels/roms etc on them. Since the p9 was the first Huawei device I've owned i was a little scared to flash it. But it got too much for me and i tried, and fail Now i have a P9 that doesn't work and a very upset wife because I've killed my phone.
So what i did was tried to flash via dload 3 button method a nougat fw (official)but had no camera/file manager/calendar etc. Found it was possible to downgrade via flashing a downgrade fw. I cant remember what nougat fw i tried to flash but in the about device the build number was nrd10testkeys or something like that. My official fw before was EVA-L09C706B145. After flashing the downgrade fw my phone rebooted and just hung at the Huawei boot splash screen. All i can do now is access fastboot by holding vol - while plugging in usb. I cant access recovery/cant boot past Huawei splash screen. I have tried fastboot flashing via adb but it fails due to permission error (thinking because of locked bootloader?) Have tried using Huawei updater with hisuite to recover device, download, unpacks and installs recovery to 99%then fails. Pleaee help me fix my phone so i can get back into the goodbooks with the wife.......
Tia all
Try following post #4 instructions from here: https://forum.xda-developers.com/p9/help/failed-downgrade-nougat-to-mm-bricked-t3464156
I have successfully unlocked the bootloader and managed to install TWRP 3.1.0-3 but that's about it. I cannot install any other TWRP version but the one I mentioned. I tried installing Magic Rainbow custom ROM but it doesn't work properly (apps are super slow, entering developer settings makes the settings app crash, can't set a password etc.). So with that I can at least access the phone interface with limited options. Developer settings crashes when I choose it; if I can get through then I can't enable USB debugging, it keeps turning itself off right as I enable it. I can't use update function so I have to use 3 button installation, which randomly fails to work very often. Due to this I haven't been able to install any updates.
I kinda gave up on rooting already, I just want to get my old firmware back at this point but I can't even do that. SRKTools stock marshmallow recovery doesn't work either. It's as if TWRP 3.1.0 has taken over everything. On the rare occasions that I managed to get EMUI update via 3 button installation it would say that the update doesn't match the current version (or something like that). I tried using recover for b378 and managed to run the 3 button update but it always gets stuck at 5%. It gives up after a while, tries booting twice and then goes into eRecovery screen. My bootloader PHONE unlocked text is in red if it matters.
I've been actively trying to fix this for the last 11 hours (yes I'm not exaggerating at all). Please, PLEASE someone help me out with this!
I've also tried using the unbrick tool of the latest SRK Tool 2.0 for b378. It goes flawless, phone restarts and does a factory wipe but then doesn't boot after the Huawei screen. It tries booting twice and then it goes into eRecovery screen. Have I ruined some hardware here?
It seems like 3 button upgrade is my salvation and it doesn't work. Many times I hold it down, I get a slightly different screen but it again hangs at booting text. I managed to flash all recovery, boot and system image files and got the installing update screen in my b378 update, but it hangs at 5%. I couldn't even manage to get the installing update screen for common b136. Also when I try to flash system.img I get an error with flashing system which is FAILED (remote:sparse flash write failure).
First at all: The Magic Rainbow custom ROM is based on B383 so it wont work on B378 firmware thats your fault here.
Just flash the rollback package (find it in my signature) and after this flash B383 or if it not work start with B136. U have to do all with the dload method.
Fast solution?
https://forum.xda-developers.com/p9/development/p9-moonlight-rom-v1-0-b378-stock-t3567223
flash the B378 version. probably your problem is solved by this.
I'm very well aware that Magic Rainbow doesn't work with b378. That's probably the reason I have those issues with it. But it's the only way I can access the phone's interface in case I need to use it for a fix.
I tried flashing b378 already multiple times, without rollback and it did not work. Is it safe to use the rollback though? My oem is c432, would it create any issues to use that? Should I flash c900 oem first or can I go with the rollback right away? I literally cannot install any stock rom without having frozen/looping bootscreen atm so I can't complete any step that requires me to do that.
I've also tried flashing b136 plenty of times already. I can't even flash the system.img. I can't flash the system of any of the b100 series.
Lauran_N said:
I'm very well aware that Magic Rainbow doesn't work with b378. That's probably the reason I have those issues with it. But it's the only way I can access the phone's interface in case I need to use it for a fix.
I tried flashing b378 already multiple times, without rollback and it did not work. Is it safe to use the rollback though? My oem is c432, would it create any issues to use that? Should I flash c900 oem first or can I go with the rollback right away? I literally cannot install any stock rom without having frozen/looping bootscreen atm so I can't complete any step that requires me to do that.
I've also tried flashing b136 plenty of times already. I can't even flash the system.img. I can't flash the system of any of the b100 series.
Click to expand...
Click to collapse
u tried the rom i mentioned?
it is safe to use the rollback package. any firmware after will retrive your oem to c432. so you dont need to flash the oem info package.
1. flash rollback package via dload (watch out to have only the UPDATE.APP file in dload folder)
2. flash B383 via dload (2 files need to be flashed!)
3. flash special SuperSU_for_EMUI5.zip
4. have fun
again if u can boot magic rom then you can flash and use Moonlight rom v1.0
xtcislove said:
u tried the rom i mentioned?
it is safe to use the rollback package. any firmware after will retrive your oem to c432. so you dont need to flash the oem info package.
1. flash rollback package via dload (watch out to have only the UPDATE.APP file in dload folder)
2. flash B383 via dload (2 files need to be flashed!)
3. flash special SuperSU_for_EMUI5.zip
4. have fun
again if u can boot magic rom then you can flash and use Moonlight rom v1.0
Click to expand...
Click to collapse
I cannot flash rollback using 3 buttons method. I see the "your device is booting now" text and then it goes to TWRP menu. Nothing happens. This is what I mean with 3 button method not working. Every single update fails probably because of this. Is there anything else I can do to flash it?
I've also tried flashing b378 and then doing the rollback. Still doesn't work: It hangs at 5% as it did with the b378 update.
Also, is there a special way of flashing those 2 files of b383? Is it just one after another? I doubt I can flash them at the same time since they have the same name.
YES IT WORKED! Thank you the rollback actually made the difference. I had to go for b136 and then upgrade manually through there with the stock OS though. And I believe rollback changed the status to LOCKED instead of RELOCKED. And I was a complete moron for I couldn't do 3 button update because my cable was still plugged in. I had a moment of epiphany when I noticed what the symbol actually represents. It was like discovering who Keyser Soze was lol. Let this idiocy stay here for there might be others like me; this way they might fix it without embarrassing themselves like I did.
Glad it worked for you.
Next time just read the threads in this forum.
There are several toturials how to flash the p9 the right way.
Lauran_N said:
YES IT WORKED! Thank you the rollback actually made the difference. I had to go for b136 and then upgrade manually through there with the stock OS though. And I believe rollback changed the status to LOCKED instead of RELOCKED. And I was a complete moron for I couldn't do 3 button update because my cable was still plugged in. I had a moment of epiphany when I noticed what the symbol actually represents. It was like discovering who Keyser Soze was lol. Let this idiocy stay here for there might be others like me; this way they might fix it without embarrassing themselves like I did.
Click to expand...
Click to collapse
Can you explain in detail how your fact? That would be nice
Genysix said:
Can you explain in detail how your fact? That would be nice
Click to expand...
Click to collapse
1. Flash Rollback Package
2. Flash Firmware Package/s
3.Unlock booloader
4.Flash twrp
5.Flash SuperSU
6.Ready
Just read the threads in this forum guys and you errors will magically dissappear or not even happen
xtcislove said:
1. Flash Rollback Package
2. Flash Firmware Package/s
3.Unlock booloader
4.Flash twrp
5.Flash SuperSU
6.Ready
Just read the threads in this forum guys and you errors will magically dissappear or not even happen
Click to expand...
Click to collapse
Every time I try to flash, with 3 buttons method, it puts me "software install failed"
I tried to flash official rom with twrp but he can't finish the process.
I tried to flash custom rom. When I want to boot, he bootloop.
Hi,
I am at a complete loss and going round in circles. My phone has bootlocker unlocked message at moment. In adb fastboot devices finds the phone, but the SRK tool fails to find it sticking on 'waiting for phone'. I tried to flasg the Huawei rollback but that fails (presumably due to being unlocked). I cannot relock via fastboot as that gives 'remote: command not allowed' error.
Update
- I have just checked fastboot - it says Phone Unlocked & FRP Unlock.
- Next I used Huawei Update Extractor to get boot, recovery, cust & system img from the "HUAWEI_P9_Firmware_EVA-L09_Andriod 6.0_EMUI 4.1_C432B166_United Kingdom_Channel-Others" Package.
It seems I still cannot boot and device still says unlocked etc..
Update 2 :-
Copied the dload/update.app file from the HUAWEI_P9_Firmware_EVA-L09_Andriod 6.0 zip. Managed to get it to start installing, only to get Software Install Failed msg. However reboot let me start the phone. So currently have Build No: EVA-L09C432B166 on.
At this point I just want my phone either back to initial factory state or able to flash roms, whichever is easier to get to. Any help greatly appreciated. I've been getting nowhere following guides I have found, so would really appreciate some help here.
Thank You
Genysix said:
Every time I try to flash, with 3 buttons method, it puts me "software install failed"
I tried to flash official rom with twrp but he can't finish the process.
I tried to flash custom rom. When I want to boot, he bootloop.
Click to expand...
Click to collapse
Ok first of all, using TWRP back up everything you have there (backing up SD card isn't really needed unless you plan to wipe it too). Then, using TWRP again just wipe everything but OEM and SD card (external storage). Then, create a folder called "dload" in the main SD card directory and put ONLY the update.app in it (use the stock b136 as suggested). Now you need to flash a stock recovery using bootloader again. Just use the Huawei Update Extractor and get both recovery.img and boot.img from the rom that you're using to flash (in this case b136). Put them in the same folder as adb. Run adb cmd, write commands "fastboot flash recovery recovery.img" and then "fastboot flash boot boot.img" and finally "fastboot reboot". Quickly unplug your usb cable and use the 3 button force update (Vol Up+Vol Down+Power button all held together and don't let go until you see the update start). It should work without a problem if you had managed to wipe everything using TWRP. If it still doesn't work you could try deleting OEM info as well and flashing a new one (c432) which you can find on the forums. Back up is important in case it still doesn't work, you might need them to undo things.
If it boots, it means you've learned how to do it and you can probably unbrick it as much as you want haha. You can update to Nougat (7.0) and EMUI 5 using Huawei Updater 2.0 along with HiSuite, there is a guide here on the forums to do so by updating to b182 then to b360/b361>b378>b383 which I was unable to find for now. After that you can install a custom rom without an issue. I figured I wouldn't mess with it anymore but frankly it's likely that you are just soft bricking by skipping something very simple and failing because of that unless you went ahead and did things that you are explicitly told not to do so. If you end up having it unlocked/relocked might as well try and get a custom rom really.
If the update gets stuck at 5% or you have the icon of a usb cable end with a lightning on it your mistake is that you didn't unplug it. If the update keeps failing without these it's likely that you're using the wrong firmware and you could try using another one (FULL+PV+MV ones if you're going for a higher one). Or you could try to follow the rollback and then the update as I did. if you do the rollback then the update, your phone might get a LOCKED status again (yes not relocked).
If you are missing something or you think you have a stupid question and too shy to ask it here just PM me.
Phil_UK said:
Hi,
I am at a complete loss and going round in circles. My phone has bootlocker unlocked message at moment. In adb fastboot devices finds the phone, but the SRK tool fails to find it sticking on 'waiting for phone'. I tried to flasg the Huawei rollback but that fails (presumably due to being unlocked). I cannot relock via fastboot as that gives 'remote: command not allowed' error.
Update
- I have just checked fastboot - it says Phone Unlocked & FRP Unlock.
- Next I used Huawei Update Extractor to get boot, recovery, cust & system img from the "HUAWEI_P9_Firmware_EVA-L09_Andriod 6.0_EMUI 4.1_C432B166_United Kingdom_Channel-Others" Package.
It seems I still cannot boot and device still says unlocked etc..
Update 2 :-
Copied the dload/update.app file from the HUAWEI_P9_Firmware_EVA-L09_Andriod 6.0 zip. Managed to get it to start installing, only to get Software Install Failed msg. However reboot let me start the phone. So currently have Build No: EVA-L09C432B166 on.
At this point I just want my phone either back to initial factory state or able to flash roms, whichever is easier to get to. Any help greatly appreciated. I've been getting nowhere following guides I have found, so would really appreciate some help here.
Thank You
Click to expand...
Click to collapse
So you're saying that you're able to boot your phone on stock b166? Then update it to b182 first. I had to keep pressing the check update for a while before it popped up. I was busy at the time so I didn't mind the wait time but I bet you can do it faster forcefully, got to be a guide around here somewhere. Here is the guide to update it all the way to b383 from b182.
Lauran_N said:
So you're saying that you're able to boot your phone on stock b166? Then update it to b182 first. I had to keep pressing the check update for a while before it popped up. I was busy at the time so I didn't mind the wait time but I bet you can do it faster forcefully, got to be a guide around here somewhere. Here is the guide to update it all the way to b383 from b182.
Click to expand...
Click to collapse
I'm on B166 currently. Phone tells me it has update for B182, on reboot I get the device unlocked message and it sticks on 'Your device is booting now'.
Also tried Huawei updater....that sticks at 'Listened on Port 41279'
Thanks
Phil_UK said:
I'm on B166 currently. Phone tells me it has update for B182, on reboot I get the device unlocked message and it sticks on 'Your device is booting now'.
Also tried Huawei updater....that sticks at 'Listened on Port 41279'
Thanks
Click to expand...
Click to collapse
Getting the device unlocked message shouldn't indicate anything, only that you didn't lock it again. It might be that you didn't install your current rom correctly. You could try flashing TWRP, backing up everything and then wiping all of it f. It means you'll be romless for a while but worst case you can recover what you backed up with TWRP and then flash it with a stock rom again. There are guides to flashing everywhere and I've made my own guide here. I can't really give you advice on your situation since I haven't ever been there. I just dabble with these things, so I can't really find a solution for everything.
You are connected to HiSuite while running Huawei Updater right? It needs to be able to see your phone (usb debugging on or HDB mode) and set to usage via proxy.
Lauran_N said:
Getting the device unlocked message shouldn't indicate anything, only that you didn't lock it again. It might be that you didn't install your current rom correctly. You could try flashing TWRP, backing up everything and then wiping all of it f. It means you'll be romless for a while but worst case you can recover what you backed up with TWRP and then flash it with a stock rom again. There are guides to flashing everywhere and I've made my own guide here. I can't really give you advice on your situation since I haven't ever been there. I just dabble with these things, so I can't really find a solution for everything.
You are connected to HiSuite while running Huawei Updater right? It needs to be able to see your phone (usb debugging on or HDB mode) and set to usage via proxy.
Click to expand...
Click to collapse
Thanks for your help. Where do you set the usage to via proxy? Perhaps thats my issue.
Phil_UK said:
Thanks for your help. Where do you set the usage to via proxy? Perhaps thats my issue.
Click to expand...
Click to collapse
Run HiSuite. Make sure your phone is connected to it. Top right you'll see 4 buttons: 3 horizontal stripes, minimise, full screen and X. Press 3 stripes one and choose settings. In the first tab called General under the 4th section you'll see Proxy. Enable it and enter 127.0.0.1 for address and the given listening port as the port. Leave the username and password blank. Press apply. Then you probably have to choose the system upgrade from the main screen of HiSuite. I don't recall exactly but this is about how it goes.
Lauran_N said:
Run HiSuite. Make sure your phone is connected to it. Top right you'll see 4 buttons: 3 horizontal stripes, minimise, full screen and X. Press 3 stripes one and choose settings. In the first tab called General under the 4th section you'll see Proxy. Enable it and enter 127.0.0.1 for address and the given listening port as the port. Leave the username and password blank. Press apply. Then you probably have to choose the system upgrade from the main screen of HiSuite. I don't recall exactly but this is about how it goes.
Click to expand...
Click to collapse
Many Thanks
I managed to flash B360_update.zip via recovery instead. I also have a B360_update_data_full_hw_eu.zip but not sure what that is for.
Hello everyone
i have hard bricked my phone i have installed Elite rom for my nem-l21 and it was going perfectly, and i have made backup of my stock system but after booting it up it goes into bootloop and Huwawei eRecovery comes in, i cant access fastboot or twrp by button press only Huwawei eRecowery. I tried install stock rom by update.app but it is not compatible. My PC sees my phone when is off as NEM-21 in device manager but it isnt showing up on adb devices neither on fastboot devices. Please help because i have no idea how i can fix it. :crying:
I have unlocked bootloader and FRP
carlos0305 said:
Hello everyone
i have hard bricked my phone i have installed Elite rom for my nem-l21 and it was going perfectly, and i have made backup of my stock system but after booting it up it goes into bootloop and Huwawei eRecovery comes in, i cant access fastboot or twrp by button press only Huwawei eRecowery. I tried install stock rom by update.app but it is not compatible. My PC sees my phone when is off as NEM-21 in device manager but it isnt showing up on adb devices neither on fastboot devices. Please help because i have no idea how i can fix it. :crying:
I have unlocked bootloader and FRP
Click to expand...
Click to collapse
Hi
If the eRecovery works
flash build number cxxxb100
carlos0305 said:
Hello everyone
i have hard bricked my phone i have installed Elite rom for my nem-l21 and it was going perfectly, and i have made backup of my stock system but after booting it up it goes into bootloop and Huwawei eRecovery comes in, i cant access fastboot or twrp by button press only Huwawei eRecowery. I tried install stock rom by update.app but it is not compatible. My PC sees my phone when is off as NEM-21 in device manager but it isnt showing up on adb devices neither on fastboot devices. Please help because i have no idea how i can fix it. :crying:
I have unlocked bootloader and FRP
Click to expand...
Click to collapse
Try to use the Multi-Tool for team MT,maybe it will help you to unbrick your phone,i`ve used yesterday to unbrick a Honor 5C NEM-L21.You will need the update.zip for you phone and Huawei Update Extractor.
Or try DC Phoenix
Hello everybody,
I have a P9 that mounted twrp and magisk.
Needing safetynet pass, i decided to make a factory reset of my phone and to try again the rooting. Unfortunately i discover that Huawei had blocked the bootloader generator of codes and now i have a phone, that is switching ON, but missing a lot of apps (calculator, clock, recording voice, etc...).
Also commands like *#*#2845679#*#* to try update from there not working (not appears the hidden menu)
I tried to restore (finding my exact firmware) via dload but everytime i get error at 5%. Via OTA update same errors.. Now i have the phone in Bootloader LOCKED.
Can someone helps me to install again the full stock firmware in my phone. Thank you so much
Ryuzakeee said:
Hello everybody,
I have a P9 that mounted twrp and magisk.
Needing safetynet pass, i decided to make a factory reset of my phone and to try again the rooting. Unfortunately i discover that Huawei had blocked the bootloader generator of codes and now i have a phone, that is switching ON, but missing a lot of apps (calculator, clock, recording voice, etc...).
Also commands like *#*#2845679#*#* to try update from there not working (not appears the hidden menu)
I tried to restore (finding my exact firmware) via dload but everytime i get error at 5%. Via OTA update same errors.. Now i have the phone in Bootloader LOCKED.
Can someone helps me to install again the full stock firmware in my phone. Thank you so much
Click to expand...
Click to collapse
Before Factory resetting you had to uninstall Magisk and to flash stock Recovery...
You can't apply DLOAD to builds that are not FulOTA_MF_PV (and most new builds are no more PV)...
Since you prevoously had TWRP, you did have Bootloader unlocked - just use the same code (you had to save it when you obtained it from Huawei) and unlock the Bootloader again.
If you didn't save Bootloader, this time you will have to buy 4 Euros credit and get it from DC-unlocker
https://www.dc-unlocker.com/how-to-read-huawei-bootloader-unlock-code
zgfg said:
Before Factory resetting you had to uninstall Magisk and to flash stock Recovery...
You can't apply DLOAD to builds that are not FulOTA_MF_PV (and most new builds are no more PV)...
Since you prevoously had TWRP, you did have Bootloader unlocked - just use the same code (you had to save it when you obtained it from Huawei) and unlock the Bootloader again.
If you didn't save Bootloader, this time you will have to buy 4 Euros credit and get it from DC-unlocker
Click to expand...
Click to collapse
I have no more the bootloader code, i never save it. I think so, buying it and after doing everything. Thank you
EDIT: but i cant't change to manufacture mode.. when i type the secret code from the guide (*#*# ...) nothing happens..
Ryuzakeee said:
I have no more the bootloader code, i never save it. I think so, buying it and after doing everything. Thank you
Click to expand...
Click to collapse
If you are on Nougat, when you buy the code and unlock Bootloader, then flash TWRP and use HWOTA method to recover stock ROM
https://forum.xda-developers.com/p9/development/rom-huawei-p9-magicrainbow-v4-t3759292/
If you never ever want to root, then you could try to save 4 Euros (not unlocking Bootlader) and
a) Settings / Advanced Settoings / Backup and Reset / Factory reset and accept to Wipe Inetrnal memory
b) Boot to EMUI Recovery (switch off, boot by pressing Vol+ and Pow) and choose Factory reset
But not sure would it be able completely restore stock ROM (apps you are missing).
Also c) Switch off, connect by USB to charger, boot by Vol+ and Power, it should boot to Huawei eRecovery. Then download (over WiFi) and reinstall stock.
But I will prefer getting Bootloader code and then using HWOTA.
When you have unlocked Bootloader, if things go wrong, you have more options to unbrick the phone if it becomes necessary
zgfg said:
If you are on Nougat, when you buy the code and unlock Bootloader, then flash TWRP and use HWOTA method to recover stock ROM
If you never ever want to root, then you could try to save 4 Euros (not unlocking Bootlader) and
a) Settings / Advanced Settoings / Backup and Reset / Factory reset and accept to Wipe Inetrnal memory
b) Boot to EMUI Recovery (switch off, boot by pressing Vol+ and Pow) and choose Factory reset
But not sure would it be able completely restore stock ROM (apps you are missing).
Also c) Switch off, connect by USB to charger, boot by Vol+ and Power, it should boot to Huawei eRecovery. Then download (over WiFi) and reinstall stock.
But I will prefer getting Bootloader code and then using HWOTA.
When you have unlocked Bootloader, if things go wrong, you have more options to unbrick the phone if it becomes necessary
Click to expand...
Click to collapse
I've solved with Firmware Finder, taking a FULLOTA-MF Update and following the guide inside the app. All the stocks application are now restored. Thanks
Ryuzakeee said:
I've solved with Firmware Finder, taking a FULLOTA-MF Update and following the guide inside the app. All the stocks application are now restored. Thanks
Click to expand...
Click to collapse
Did you use Proxy or DNS method in FF?
Using DNS Method, and downloading all three zips
Well i was tired and did the mistake to flash boot via twrp app. Now phone cant boot system of curse.
looking for advice for faster repair as im traveling and internet is not that good. I tried to access Twrp but i cant even after reflashing the image. My bootloader in unlocked and im in emui 9.1. i had saved boot.img and recovery.img but there are in the phone.
any help or advice please ?
Rovyo said:
Well i was tired and did the mistake to flash boot via twrp app. Now phone cant boot system of curse.
looking for advice for faster repair as im traveling and internet is not that good. I tried to access Twrp but i cant even after reflashing the image. My bootloader in unlocked and im in emui 9.1. i had saved boot.img and recovery.img but there are in the phone.
any help or advice please ?
Click to expand...
Click to collapse
Hello!
If still problem, please write me...
1. TWRP recovery installed this phone, and running?
2. Boot partition available this phone?
3. Available any backup this earlier system?
Please test the HISUITE software! If not recognise, need TWRP full backup.
I have only CLT-L09 8.1 TWRP clean backup. (After 8.1 not rootable.) The filesytem formatted another "unsecured" type and installed another patch to TWRP R/W full control:
nocheck.img (bootloader)
Disable_Dm-Verity_ForceEncrypt_v1.4.zip (disable encrypting)
The TWRP restore only one fast method. (~5-10 min)
Other:
Pay more USD to minimal 3 day licence DC-Unlocker / DC-Phoenix. Need unassembly the back cover and more cover to start TEST MODE (need to DC-Unlocker softwares). This softwares upload any firmware completly in test mode.
Test mode: upload patched bootloader and reboot this bootloader to flash firmware.
10-20$ + 20-30min + more to install TWRP and disable security.
Another free softwares freezing or not comaptibiles the standard FW files.
Hello!
My phone running correctly more time...
Now slow down, Lucky Patcer patcing apk-s and not patched --> uninstalled from system in patchning.
Manually shutdown this phone... (Shutdown - yes) wait, and not power on, not charging.
Plugged to PC, PC say: USB-COM mode.
Used IDT 2.0.0.9 to reflash.
After writing NVME, failed writing.
Cleared NVME line in XML file and flashed again. Flashing ended correctly.
Phone not start.
Replug and not available USB-COM mode, windows not recognize the phone (testpoint starting: same). (With/without battery: same.)
Now fully bricked the phone. Tested 2 PC, plugged USB (with/without testpoint start) no device.
Available all partition IMG file (backup, 1 year old) and TWRP WIM files (1 day old). Restore easy, only need running TWRP.
How to unbrick? DC-Phoenix/IDT work only USB-COM mode... now not recognise any (ADB/COM) mode.
Thanks!