P10 rebranding - Huawei P10 Questions & Answers

Hello I'm the proud owner of a VTR-L09 P10 with the oreo based VTR-L09 8.0.0.364(c530) firmware and an unlocked bootloader. I have tried many tutos across the internet but I still can't downgrade it to nougat in order for rebranding to VTR-29.
Can someone with matching conf or a close one who has succeeded in rebranding can help me with a working tuto.
Thanks in advance and....
HAPPY NEW YEAR !!!!

First, you twist nougat and Oreo. Your phone is on Oreo and you wanted to downgrade to Nougat.
I don't know, why the downgrade didn't work for you, but maybe now it does with the correct understanding of versions (nougat is the older one).
If you're a bit experiment friendly, you can try something for me - but I really can't guarantee you that this will work without brick!
You need an SD card for this, don't try it without!
- Download your desired firmware from Firmware Finder. I recommend 8.0.0.382 for L29-C432, which I installed on my rebranded P10 yesterday.
Here are the links:
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G2323/g1699/v202186/f1/full/update.zip
http://update.hicloud.com:8180/TDS/...l/VTR-L29_hw_eu/update_full_VTR-L29_hw_eu.zip
http://update.hicloud.com:8180/TDS/...86/f1/full/public/update_data_full_public.zip
- Download my oeminfo file and put it on SD.
- Download and flash this TWRP. It will ask you for a password at boot, type your phone PIN.
- Backup your oeminfo with TWRP on SD AND internal memory, just to be sure.
- Now flash my oeminfo file with TWRP via Install/Use Image.
- Go to my guide and follow now Tutorial #2, Oreo to Oreo, exactly. You can use the TWRP version you already installed, but everything has to be like in the tutorial.
It should work, but, as I mentioned above, I can't guarantee it.
The worst thing which can happen is that you brick your firmware. For this, you should be able to reinstall an L09 firmware after restoring your oeminfo file via eRecovery.
But I think the recovery will stop installing L29 if it didn't work with the oemfile - if so, you just need to restore the oeminfo backup.
Don't boot into your L09 firmware with L29 oeminfo!

Jannomag said:
First, you twist nougat and Oreo. Your phone is on Oreo and you wanted to downgrade to Nougat.
I don't know, why the downgrade didn't work for you, but maybe now it does with the correct understanding of versions (nougat is the older one).
If you're a bit experiment friendly, you can try something for me - but I really can't guarantee you that this will work without brick!
You need an SD card for this, don't try it without!
- Download your desired firmware from Firmware Finder. I recommend 8.0.0.382 for L29-C432, which I installed on my rebranded P10 yesterday.
Here are the links:
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G2323/g1699/v202186/f1/full/update.zip
http://update.hicloud.com:8180/TDS/...l/VTR-L29_hw_eu/update_full_VTR-L29_hw_eu.zip
http://update.hicloud.com:8180/TDS/...86/f1/full/public/update_data_full_public.zip
- Download my oeminfo file and put it on SD.
- Download and flash this TWRP. It will ask you for a password at boot, type your phone PIN.
- Backup your oeminfo with TWRP on SD AND internal memory, just to be sure.
- Now flash my oeminfo file with TWRP via Install/Use Image.
- Go to my guide and follow now Tutorial #2, Oreo to Oreo, exactly. You can use the TWRP version you already installed, but everything has to be like in the tutorial.
It should work, but, as I mentioned above, I can't guarantee it.
The worst thing which can happen is that you brick your firmware. For this, you should be able to reinstall an L09 firmware after restoring your oeminfo file via eRecovery.
But I think the recovery will stop installing L29 if it didn't work with the oemfile - if so, you just need to restore the oeminfo backup.
Don't boot into your L09 firmware with L29 oeminfo!
Click to expand...
Click to collapse
Hello
I tried it and now I'm stuck in and endless reboot loop with only Huawei logo

Can you help me please ?

Did you do the factory reset via eRecovery?
The update with my script worked without any errors?

Related

Messed up P9

My P9(L19 - C636) is really messed up right now. I messed up my firmware. My phone has its bootloader unlocked, rooted.
It has C900 B168 install. I just want to go back to stock with locked bootloader. Please help.
PS:When I boot my screen is like this instead of the huawei logo: https://imgur.com/a/s5mRH
ALSO quick note when i attempted to flash oeminfo on twrp, it kept saying unable to mount /data.
I think its messed up yes.
You can try to use the Rollback Package in my description, its for L09 and L19 after this u should try to dload something like this firmware:
https://huaweidl.com/download/p9/eva-l19/b180/

Stuck in Oreo C636

Hi, i need to rollback oreo c636, but the rollback firmware is not signed, i tried the guide in this forum, but i can't flash the rom because i only have 2 files, and if i modified the hwota_update with notepad, i get an error in twrp, so now i'm kinda ****ed, no rollback and also no original recovery.
How long i need to wait for b172 rollback for signed? there is another way? i need to give the phone to someone, no real hurry but he pays for the phone, so i just want to put l29c432 back.
Sorry for my english, thank you
Hi mate, in order to downgrade to Nougat you have to use the Guides below. (That's what I used myself when I fxxxed up)
Read them carefully, understand them and then proceed.
If you can not access MTP folder on your phone from TWRP just copy the files into a SD card, after flashing TWRP for OREO.
Downgrade Resource 01
Downgrade Resource 02
Huawei Multi-Tool
PS: If helped give credit to the guys that formed the above guides.

Canadian p20pro L04 to L29 questions after rebranding,updating and rooting.

Hi Everyone,
Ive rebranded my canadian p20pro to L29 using these guide successfully
To root
https://forum.xda-developers.com/hu...ide-getting-started-unlock-twrp-root-t3806180
To debrand
https://forum.xda-developers.com/hu...ide-getting-started-unlock-twrp-root-t3806180
To install firmware updates
https://forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279
I had some questions hopefully can be resolved.
When there is an update in firmware finder can install it directly or it has to be through twrp or erecovery?
Am i able to update magisk manager without problems?
anyone got viper4anroid working or made audio experience better for this phone?
i understand that every time I update firmware ill loose root. Is there a way to not loose it?
Will update firmware make me loose all my apps and settings?
does downgrading firmware causing bricking?
Hello!
I've done the same thing. I didn't install TWRP so I can update via OTA. Today i've got 8.1.0.131 (C432) update. If you use TWRP to update firmware it will wipe your data. Magisk can be updated without problem. Viper will not work. No support for x64 audio drivers.
Go back from l29 to l04
How do i go back to l04 from l29 i was l04 at the start
When a new update is available you can just download it and flash it through hurupdater in twrp.
After updating just flash magisk again and you will retain root (also remember to reflash twrp/have the recovery.img file in the same directory when updating through hurupdater).
You will not loose any data or settings (unless the new firmware explicitly tells otherwise).
mrabcx said:
When a new update is available you can just download it and flash it through hurupdater in twrp.
After updating just flash magisk again and you will retain root (also remember to reflash twrp/have the recovery.img file in the same directory when updating through hurupdater).
You will not loose any data or settings (unless the new firmware explicitly tells otherwise).
Click to expand...
Click to collapse
How do I go back to l04 from l29 I was l04 originaly
Hey do you know how to go back to l04 from l29?
kiazand said:
Hi Everyone,
Ive rebranded my canadian p20pro to L29 using these guide successfully
To root
https://forum.xda-developers.com/hu...ide-getting-started-unlock-twrp-root-t3806180
To debrand
https://forum.xda-developers.com/hu...ide-getting-started-unlock-twrp-root-t3806180
Click to expand...
Click to collapse
Hello Just one question. Did you use the same guide to get root and to debrand or was the same link used by mistake? I am asking because I am doing this to my phone and I am now in the debrand part. will really appreciate your help. thanks

Revert rebrand

Hey everyone,
So, a couple months back I rebranded my EVA-L09 to a VIE-AL10 through the rebrand tool.
A couple weeks back I wanted to revert back to EVA-L09 to go back to Magic Rainbow v4 or v3.
I failed in trying to rebrand it back and ended up where I am now, I have TWRP installed, I can do the dload methods to install whatever, but I can't for the life of me get any ROM or firmware to boot. It either doesn't go past the "Your device is not trusted" screen or it hangs at the boot animation.
Extra notes: Yes I was on Oreo when I tried to revert, I am currently not on Oreo as I tried to flash a Nougat VIE-AL10 firmware to attempt to get the phone to at least boot to a usable state for the time being, however now it's stuck on a boot animation.
Would appreciate any help,
Cheers.
Update:
I tried to follow this: https://forum.xda-developers.com/showpost.php?p=77161313&postcount=2
But as mentioned above the phone hangs on "Your device is booting now..." after HWOTA copies the Nougat firmware files.
gamr13 said:
Hey everyone,
So, a couple months back I rebranded my EVA-L09 to a VIE-AL10 through the rebrand tool.
A couple weeks back I wanted to revert back to EVA-L09 to go back to Magic Rainbow v4 or v3.
I failed in trying to rebrand it back and ended up where I am now, I have TWRP installed, I can do the dload methods to install whatever, but I can't for the life of me get any ROM or firmware to boot. It either doesn't go past the "Your device is not trusted" screen or it hangs at the boot animation.
Extra notes: Yes I was on Oreo when I tried to revert, I am currently not on Oreo as I tried to flash a Nougat VIE-AL10 firmware to attempt to get the phone to at least boot to a usable state for the time being, however now it's stuck on a boot animation.
Would appreciate any help,
Cheers.
Click to expand...
Click to collapse
EVA is P9, VIE is P9 Plus
Don't mix firmwares, you wll (no wonder if you really mixed), brick the phone
One procedure is for P9 = EVA (and this is P9 portal here):
rebranding from EVA L09/L19 to EVA AL00c00b535 and back
https://forum.xda-developers.com/p9-plus/development/rebrand-update-tool-hwota7-p9-plus-vie-t3843930
The other is for P9 Plus = VIE (different phone, eg bigger display)
rebranding from VIE L09/L29 to VIE AL00c00b535 and back
https://forum.xda-developers.com/p9/development/rebrand-update-tool-hwota7-p9-eva-t3820849
zgfg said:
EVA is P9, VIE is P9 Plus
Don't mix firmwares, you wll (no wonder if you really mixed), brick the phone
One procedure is for P9 = EVA (and this is P9 portal here):
rebranding from EVA L09/L19 to EVA AL00c00b535 and back
https://forum.xda-developers.com/p9-plus/development/rebrand-update-tool-hwota7-p9-plus-vie-t3843930
The other is for P9 Plus = VIE (different phone, eg bigger display)
rebranding from VIE L09/L29 to VIE AL00c00b535 and back
https://forum.xda-developers.com/p9/development/rebrand-update-tool-hwota7-p9-eva-t3820849
Click to expand...
Click to collapse
I was reading through the first link there, as mentioned in the second post I made in here. After following the steps one-by-one the device is stuck at "Your device is booting now..."
gamr13 said:
I was reading through the first link there, as mentioned in the second post I made in here. After following the steps one-by-one the device is stuck at "Your device is booting now..."
Click to expand...
Click to collapse
Be more specific, confirm
- Your phone is P9 or P9 Plus?
If P9, was it L09 (single SIM) or L19 (dual SIM)
- On exactly which Chinese Oreo have you been (cannot be VIE, you must well know what you exactly had and what you were flashing), was it EVA -AL00c00 or what and which build number bXX it was
- Did you go to some Open Kirin/AOSP custom ROM or stayed on that stock Chinese ROM?
You first had to come back to Chinese stock Oreo, not downgrading to Nougat directly from Open Kirin / AOSP
- Downgrading consists of several steps, HiSuite to go to Chinese Nougat and then HWOTA7 to rebrand to eg c432 Nougat.
Up to each step did you exactly do when you got stuck in Booting?
-More precisely, if you downgraded by HiSuite to AL10c00 Nougat, did it boot successfully (or were you here stuck at booting)?
If that step was successful, which (full build name and number) you were flashing by HWOTA7 to rebrand to from the Chinese Nougat?
-Have you tried to switch off and boot again?
Have you tried booting to Recovery and do Factory reset and Wipe Cache and Internal mem and then tried to teboot?
zgfg said:
Be more specific, confirm
- Your phone is P9 or P9 Plus?
If P9, was it L09 (single SIM) or L19 (dual SIM)
- On exactly which Chinese Oreo have you been (cannot be VIE, you must well know what you exactly had and what you were flashing), was it EVA -AL00c00 or what and which build number bXX it was
- Did you go to some Open Kirin/AOSP custom ROM or stayed on that stock Chinese ROM?
You first had to come back to Chinese stock Oreo, not downgrading to Nougat directly from Open Kirin / AOSP
- Downgrading consists of several steps, HiSuite to go to Chinese Nougat and then HWOTA7 to rebrand to eg c432 Nougat.
Up to each step did you exactly do when you got stuck in Booting?
-More precisely, if you downgraded by HiSuite to AL10c00 Nougat, did it boot successfully (or were you here stuck at booting)?
If that step was successful, which (full build name and number) you were flashing by HWOTA7 to rebrand to from the Chinese Nougat?
-Have you tried to switch off and boot again?
Have you tried booting to Recovery and do Factory reset and Wipe Cache and Internal mem and then tried to teboot?
Click to expand...
Click to collapse
Sure,
EVA-L09 is a regular P9. Not a P9 Plus.
I never honestly checked which Oreo firmware I was on. I downloaded the VIE-AL10C00B535 (8.0.0.535) firmware and used that.
Yes, at one point I did go to the OpenKirin AOSP ROMs. However, I was able to do the volume + & - + Power to return to Nougat and then re-flash Oreo. After this I stayed on the EMUI 8.0 firmware.
I did not use HiSuite as it never worked for me. It would always just tell me to go to a service center.
I did not use HiSuite. When I returned to EMUI 5.0.1 from eRecovery (?) Restoring over WiFi on the actual phone it booted fine and I then upgraded again to the Oreo firmware.
Yes, I have tried rebooting.
Yes, I have tried a factory reset.
When I tried to revert from a VIE-AL10 rebrand, my phone ended up getting stuck between an AL10 and an EVA-L09. Meaning that I can use the EVA-L09 TWRP but not an EVA-L09 compatible firmware or ROM. I can only boot AL10 firmwares or ROMs however they hang at the boot animation.
gamr13 said:
Sure,
EVA-L09 is a regular P9. Not a P9 Plus.
I never honestly checked which Oreo firmware I was on. I downloaded the VIE-AL10C00B535 (8.0.0.535) firmware and used that.
Yes, at one point I did go to the OpenKirin AOSP ROMs. However, I was able to do the volume + & - + Power to return to Nougat and then re-flash Oreo. After this I stayed on the EMUI 8.0 firmware.
I did not use HiSuite as it never worked for me. It would always just tell me to go to a service center.
I did not use HiSuite. When I returned to EMUI 5.0.1 from eRecovery (?) Restoring over WiFi on the actual phone it booted fine and I then upgraded again to the Oreo firmware.
Yes, I have tried rebooting.
Yes, I have tried a factory reset.
When I tried to revert from a VIE-AL10 rebrand, my phone ended up getting stuck between an AL10 and an EVA-L09. Meaning that I can use the EVA-L09 TWRP but not an EVA-L09 compatible firmware or ROM. I can only boot AL10 firmwares or ROMs however they hang at the boot animation.
Click to expand...
Click to collapse
>> I downloaded the VIE-AL10C00B535 (8.0.0.535) firmware and used that.
In yout previous post:
>> I tried to follow this: https://forum.xda-developers.com/sho...13&postcount=2
Guide you cited is for rebranding European P9 EVA to Chinese P9 EVA-AL10c00b535 - see attached screenshots from the guide, observe it is everywhere EVA-AL10, not VIE-AL10
Once again, it must be EVA before rebranding and EVA after rebranding.
VIE is different phone (different hardware - bigger display), P9 Plus.
If you didn't care about difference between EVA and VIE, maybe you really downloaded and flashed AL10c00b535 for VIE (P9 Plus) to your EVA (P9)
----
>> Yes, at one point I did go to the OpenKirin AOSP ROMs. However, I was able to do the volume + & - + Power to return to Nougat
This is procedure to boot to Recovery (eRecovery if charging by USB), not to Nougat
----
Details are important, not just when writing posts but really when reading guides and flashing, otherwise bad things can happen ;(
So please, consider again, did you really flash VIE AL10 to your P9 (5,2 inch display)?
(Maybe it worked somehow for AL10b535 because packages for Chinese P9 = EVA and P9 Plus = VIE are similar, but now when returning to Nougat it stays on VIE and doesn't boot)
zgfg said:
>> I downloaded the VIE-AL10C00B535 (8.0.0.535) firmware and used that.
In yout previous post:
>> I tried to follow this: https://forum.xda-developers.com/sho...13&postcount=2
Guide you cited is for rebranding European P9 EVA to Chinese P9 EVA-AL10c00b535 - see attached screenshots from the guide, observe it is everywhere EVA-AL10, not VIE-AL10
Once again, it must be EVA before rebranding and EVA after rebranding.
VIE is different phone (different hardware - bigger display), P9 Plus.
If you didn't care about difference between EVA and VIE, maybe you really downloaded and flashed AL10c00b535 for VIE (P9 Plus) to your EVA (P9)
----
>> Yes, at one point I did go to the OpenKirin AOSP ROMs. However, I was able to do the volume + & - + Power to return to Nougat
This is procedure to boot to Recovery (eRecovery if charging by USB), not to Nougat
----
Details are important, not just when writing posts but really when reading guides and flashing, otherwise bad things can happen ;(
So please, consider again, did you really flash VIE AL10 to your P9 (5,2 inch display)?
(Maybe it worked somehow for AL10b535 because packages for Chinese P9 = EVA and P9 Plus = VIE are similar, but now when returning to Nougat it stays on VIE and doesn't boot)
Click to expand...
Click to collapse
I honestly can't remember how I did it now, it's been a while, but it did go through successfully, and it was working fine after applying the patch.
But yeah, as of now all I can use is fastboot and TWRP. That's all. I've tried flashing EVA-L09 firmware, it doesn't boot. I've flashed AL10 firmware and it gets to a boot animation, but no further than that.
gamr13 said:
I honestly can't remember how I did it now, it's been a while, but it did go through successfully, and it was working fine after applying the patch.
But yeah, as of now all I can use is fastboot and TWRP. That's all. I've tried flashing EVA-L09 firmware, it doesn't boot. I've flashed AL10 firmware and it gets to a boot animation, but no further than that.
Click to expand...
Click to collapse
Boot to Fastboot:
- connect by USB to PC and boot by: press and keep pressing Vol-, then Pow
Ececute from the PC side and copy/paste back your results (is Bootloader still unlocked, what the phone thinks it is current model, cust, build number)
Code:
fastboot oem get-bootinfo
PAUSE
fastboot oem get-product-model
PAUSE
fastboot getvar vendorcountry
PAUSE
fastboot oem get-build-number
PAUSE
fastboot oem oeminforead-SYSTEM_VERSION
@gamr13 Please enter the shown commands by @zgfg in Fastboot mode and tell us the result.
There is not much hope to restore your device after all that you have done wrong → but if you try, what we recommend, we may can recover it.
I can confirm: EVA-L09 is not the same device as VIE-L09 → you can not rebrand EVA-L09 to VIE-AL10, and it is not possible to rebrand VIE-L09 to EVA-AL10 - That causes a lot of problems and you should not be surprised if your device does not boot again.
If your original device was an EVA-L09 you can rebrand to all EVA models, but not to VIE models - That's why there are two threads - one for P9 and the other for P9 Plus.
If you flash oeminfos and related Firmware → it must match with your device!
But if you think, you can flash whatever you like, then your device get "bricked". And here we are now.
BTW: Rebranding back to your originally model can not be done with HWOTA7 - as long the device is on Android 8 ! First a downgrade from Chinese Brand Oreo to Chinese Brand Nougat is required → after this step it is possible to use hwota7 again to rebrand. I have written all the steps in separate Posts after the main Thread.
First we need this Fastboot mode information, then we can see in which status, on which firmware and which oeminfo your device is currently.
Then it's time to flash exactly this firmware with the correct method → for this step, wait for instructions from us.
Only when the device works again, it is possible to downgrade with the correct method and return to the original model, or whatever.
As long as the device is in a "brick", nothing works, since the "brick" must first be resolved.
If it is a "semi brick", a "hard brick" can happen as well, after that the device will be dead and without any function → It teaches you to be careful with flashing and get all the information before you flash anything.
We've also had other issues caused by users doing wrong actions - not knowing what they're actually doing. But both cases were solved successfully - which was not easy:https://forum.xda-developers.com/p9/help/huawei-p9-potentally-bricked-t3841197/
Hey guys,
I've attached a screenshot below which contains all the commands and what I got from them below.
Note about the get-build-number, that was the most recent firmware I tried to flash out of literally 10 other firmwares I tried.
I appreciate everything you guys are trying to do to help me fix this problem. I'm currently trying to survive with a Galaxy S3 Mini, and it's not going well in the slightest.
Cheers.
EDIT: Just as a note, which may be obvious from the screenshots to you or not, the partitions are like Nougat, meaning I do not flash the recovery to ramdisk.
gamr13 said:
Hey guys,
I've attached a screenshot below which contains all the commands and what I got from them below.
Note about the get-build-number, that was the most recent firmware I tried to flash out of literally 10 other firmwares I tried.
I appreciate everything you guys are trying to do to help me fix this problem. I'm currently trying to survive with a Galaxy S3 Mini, and it's not going well in the slightest.
Cheers.
EDIT: Just as a note, which may be obvious from the screenshots to you or not, the partitions are like Nougat, meaning I do not flash the recovery to ramdisk.
Click to expand...
Click to collapse
Looks promissing
It says EVA, not VIE - ok
Somehow you are on c900b182 which means MM (not Nougat) - did you rollback to MM?
In Fastboot screen, does it show in red, at the bottom, both Phone (=Bootloader) and FRP Unlocked?
zgfg said:
Looks promissing
It says EVA, not VIE - ok
Somehow you are on c900b182 which means MM (not Nougat) - did you rollback to MM?
In Fastboot screen, does it show in red, at the bottom, both Phone (=Bootloader) and FRP Unlocked?
Click to expand...
Click to collapse
Yes, I tried to flash MM as well.
In fastboot mode it only shows PHONE Unlocked.
gamr13 said:
Yes, I tried to flash MM as well.
In fastboot mode it only shows PHONE Unlocked.
Click to expand...
Click to collapse
Why didn't you wait, you attempted to rollback?
Now Bootloader is unlocked but FRP is locked (and you cannot boot to System to unlock OEM=FRP)
It can block you fir further flashing ;-(
Do you want to go to c432, is it L09 (Single SIM) or L19 (Dual SIM)?
zgfg said:
Why didn't you wait, you attempted to rollback?
Now Bootloader is unlocked but FRP is locked (and you cannot boot to System to unlock OEM=FRP)
It can block you fir further flashing ;-(
Do you want to go to c432, is it L09 (Single SIM) or L19 (Dual SIM)?
Click to expand...
Click to collapse
This was around a week ago, and the FRP lock thing went away when I did the rebrand - as it's supposed to
But yeah, I can't boot the system.
It's the single SIM EVA-L09.
gamr13 said:
This was around a week ago, and the FRP lock thing went away when I did the rebrand - as it's supposed to
But yeah, I can't boot the system.
It's the single SIM EVA-L09.
Click to expand...
Click to collapse
Procedure for rebranding from c900b182 to c432 is here:
https://forum.xda-developers.com/showpost.php?p=72153575&postcount=2
Once on c432b182 you should receive OTAs to get back to Nougat.
However, procedure requires flashing OEMIFO, which most likely will be forbidden to you because your FRP is locked and you cannot boot to Systen to unlock OEM.
Which means serious brick
In that case you can try with DC Unlock (sorry, I don't know a better method), it will cost you 15 EUR (probably) and you must ask them for on-line help if needed
https://www.dc-unlocker.com/DC-Phoenix-flash-repair-tutorial
zgfg said:
Procedure for rebranding from c900b182 to c432 is here:
https://forum.xda-developers.com/showpost.php?p=72153575&postcount=2
Once on c432b182 you should receive OTAs to get back to Nougat.
However, procedure requires flashing OEMIFO, which most likely will be forbidden to you because your FRP is locked and you cannot boot to Systen to unlock OEM.
Which means serious brick
In that case you can try with DC Unlock (sorry, I don't know a better method), it will cost you 15 EUR (probably) and you must ask them for on-line help if needed
https://www.dc-unlocker.com/DC-Phoenix-flash-repair-tutorial
Click to expand...
Click to collapse
I'll follow the first link carefully and report back, thanks!
gamr13 said:
I'll follow the first link carefully and report back, thanks!
Click to expand...
Click to collapse
Try but you most likely you will need second link
Here was another user who also had to use DC Unlocker, take a look into the thread (posts #6-#11), in the last post he described how it was resolved for him by DC Unlocker
https://forum.xda-developers.com/p9/help/bought-phone-ebay-registration-wizard-t3840803
zgfg said:
Try but you most likely you will need second link
Here was another user who also had to use DC Unlocker, take a look into the thread (posts #6-#11), in the last post he described how it was resolved for him by DC Unlocker
https://forum.xda-developers.com/p9/help/bought-phone-ebay-registration-wizard-t3840803
Click to expand...
Click to collapse
I used DC Unlocker before to get my bootloader unlock key.
gamr13 said:
I used DC Unlocker before to get my bootloader unlock key.
Click to expand...
Click to collapse
I was not writing you about getting the code but to use DC Unlocker to unlock FRP ( carefully read the story, posts #6 till #11, I gave you in the previous post)
Because their tool can unlock both FRP and Bootloader, but it costs more than just getting the Bootloader code
Personally I didn't use their tool (never bricked the phone or so to need it), and cannot help you about the tool further

H e lp. Huawei p9 Eva l19 keeps restarting

My huawei p9 Eva l19 keeps restarting and fail software. Please help.
Phone unlocked.
The video https://streamable.com/71z5e
Thanks.
danro28 said:
My huawei p9 Eva l19 keeps restarting and fail software. Please help.
Phone unlocked.
The video https://streamable.com/71z5e
Thanks.
Click to expand...
Click to collapse
Bootloop doesn't happen by itself - to get help you must describe which stock/custom firmware you had, were you flashing another firmware and which or trying to root, or you were changing something under root before it started to happen
Solution to unbrick highly depends on the firmware, etc - for firmware is needed full model, cust and number
Btw, does it boot to Fastboot, EMUI Recovery (or you flashed custom Recovery TWRP) or eRecovery?
The Phone model is Eva l19.
The software is shown în The video
The bootloader is unlocked and s-o is The frp.
I tried various versions of The software but The result was The same. Using The method update.app it was working to 5%, The says 6% and then back 5 % and then erron instalation.
danro28 said:
The Phone model is Eva l19.
The software is shown în The video
The bootloader is unlocked and s-o is The frp.
I tried various versions of The software but The result was The same. Using The method update.app it was working to 5%, The says 6% and then back 5 % and then erron instalation.
Click to expand...
Click to collapse
Too small and not sharp - can you write what is your firmware version on your phone
Eva-l19c432b388
You say you were installing various firmwares - if you did, specially if you maybe combined various custs, then it was a road to mess
I would suggest you to carefully study posts OP #1 and #2 from HWOTA7 thread
https://forum.xda-developers.com/p9/development/rebrand-update-tool-hwota7-p9-eva-t3820849
Forget (at the moment - later you could do if you wish but once you solve your Nougat) about changing cust and upgtading to Chinese Nougat.
Use the HWOTA7 method instead to change the cust/location to c432 (to clean up) and to install one of the latest FullOTA-MF stock firmwares, eg L19c432b505 or so
Be careful, use L19 only if your P9 is dual SIM, otherwise must be L09
Follow every detail (but adapted to your case), including Factory Reset and Wiping Cache at the end
I tried this method but i can't recover bootloader Code because hcu client doesn't work on my pc.
Win 10 64 bit.
Could you conect to my pc and help ME fix my Phone?

Categories

Resources