I decided one day that id try using custom roms from this site and its been nice, I mean ive tried almost all the roms in this section. The reason for creating this thread and requesting help started when I decided to change from OctexGold (just wanted a change), misread and downloaded a rom for another device (woops). I dont remember the rom and for what device.
The problem :
My architecture is detected as ARM, the 32 bit version.
This is holding me back on plenty of stuff I want to try out, since ARM64 is what ive found most developers seek to support.
I realized the architecture had changed from ARM64, when I installed a proper rom after the mistake, and the GApps ARM64 version was no longer working and I has to use the 32 version.
If anyone could tell me how to fix this, itd mean alot to me, since I just cant seem to find anything.
Idk, just felt to include this screenshot from the Droid Info app
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
To clarify, ive only ever browsed on this site, and this the first account I just created before this post so I apologize if theres anything im doing wrong.
So, if you're phone is G610X (J7Prime). The correct and Default architecture is ARM for ROM / Firmware, and our CPU as far as i know must be support ARM64 but there is no ARM64 Source / Firmware.
Conclusion :
- The Correct one is ARM Instead of ARM64
- Currently there is no ARM64 Based ROM so far
Solution :
For anything to be Fixed / Back To Normal please Reflash Original Firmware:fingers-crossed:
And to be clear can you Send me the link about your False ROM installation? Maybe i can inspect why this is happened because in common the ROM will not flash by Giving ERROR saying Device not Compatible or Something.:silly:
I Guess that's it, Sorry for some bad language.
Cruxter321 said:
So, if you're phone is G610X (J7Prime). The correct and Default architecture is ARM for ROM / Firmware, and our CPU as far as i know must be support ARM64 but there is no ARM64 Source / Firmware.
Conclusion :
- The Correct one is ARM Instead of ARM64
- Currently there is no ARM64 Based ROM so far
Solution :
For anything to be Fixed / Back To Normal please Reflash Original Firmware:fingers-crossed:
And to be clear can you Send me the link about your False ROM installation? Maybe i can inspect why this is happened because in common the ROM will not flash by Giving ERROR saying Device not Compatible or Something.:silly:
I Guess that's it, Sorry for some bad language.
Click to expand...
Click to collapse
Thanks, I appreciate the reply. :good:
If I find the ROM, I'll send it.
Related
The I9001 Galaxy s plus restarts two or three times a day, which can be happening?. It has put a room ICS 4.0.4 (http://forum.xda-developers.com/showthread.php?t=1650615). Thank you very much for the help and excuse my English, I'm from Spain.
Sorry, but wrong section mate! This is the correct thread for ur device:
http://forum.xda-developers.com/showthread.php?t=1252697
Please try searching that thread first. If you can't find a solution, ask.
Thread reported.
"To err is human, to forgive is divine"
Sent from my SGS II
We're supposed to share a Q&A section with you guys
Usually people just tag the threads related to the I9001 with [I9001] to avoid confusion
You probably have installed RC6, correct? There is a problem with this version and it will indeed cause those problems. You can either install RC3 (last version without those problems) or use the kernel Christopher83 has made (and should be free of this problem). You can find that kernel here: http://forum.xda-developers.com/showthread.php?t=2172148
In any case I'd recommend doing a full wipe and clean ROM installation when installing either one of those two.
Thank you very much!, One last question, for this room that I have to download kernel, there are two in the folder v1.4
1) K^Kernel_ICS_3.0_v1.4_Linaro-4.7.3_OC_EXUV_390MB_Signed
2) K^Kernel_ICS_3.0_v1.4_Linaro-4.7.3_OC_UV_390MB_Signed
Which of these two download?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Personally I would not use the 390MB version, since so much memory has been taken away from everything. I don't trust it, but that's probably just me and if you want to try it, that's completely up to you.
The difference between these two is fairly simple
K^Kernel_ICS_3.0_v1.4_Linaro-4.7.3_OC_EXUV_390MB_Signed
K^Kernel_ICS_3.0_v1.4_Linaro-4.7.3_OC_UV_390MB_Signed
UV indicates the voltages have been lowered. This reduces battery usage, but may cause your phone to be unstable. EXUV indicates the voltages have been lowered even further. If you want your phone to be stable without more annoyances go with the least undervolted version (in this case, the UV version). If you feel adventurous you can try EXUV.
If you're using EXUV and your phone is unstable (crashes and the likes) try using UV. If your phone is unstable when you're using the UV version, you're out of luck and you should not use the K^Kernel. Usually the UV version should not be a problem though
Good luck!
posonty said:
Thank you very much!, One last question, for this room that I have to download kernel, there are two in the folder v1.4
1) K^Kernel_ICS_3.0_v1.4_Linaro-4.7.3_OC_EXUV_390MB_Signed
2) K^Kernel_ICS_3.0_v1.4_Linaro-4.7.3_OC_UV_390MB_Signed
Which of these two download?
Click to expand...
Click to collapse
hello use the K ^ Kernel_ICS_3.0_v1.4_Linaro-4.7.3_OC_EXUV_390MB_Signed
Powered fatal Kernel the room and at the end change the room [ROM] [JB] [JZO54K] CyanogenMod 10 by ivendor - Release 2 - Kernel 3.0.x and everything works perfect now!. Thanks for all equally. Greetings from Spain
Idk if this is really news since there's a how to root MIUI 8.1.3.0 guide already
But im getting Miui 8.1.3.0 MBCMIDI pushed to me atm, and its a big 1.3GB rom.
All it says is "Optimization - improved system security (11-29"
If there's anything can I can do to help the community regarding this rom lmk + instructions and ill do my best to help..
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Post a changelog (screanshot) if a more detailed one appears after you install.
Just finished the update.
Same line as I posted above in the "what's new" section
Here's screenshot of updated phone info
Just updated to this last night. No issues so far
You should really post that in news and discussion forum, not here. This sub forum is for ROM, kernel development, so this post got nothing to do whit it.
Puff... They didn't touched the kernel side from 8.1.2 same version, same signature. Will probably skip this one...
download link plz.
Wizard1Canada said:
Idk if this is really news since there's a how to root MIUI 8.1.3.0 guide already
But im getting Miui 8.1.3.0 MBCMIDI pushed to me atm, and its a big 1.3GB rom.
All it says is "Optimization - improved system security (11-29"
If there's anything can I can do to help the community regarding this rom lmk + instructions and ill do my best to help..
Click to expand...
Click to collapse
where is the download link
Pls, did you sign up to a beta program?
Im in canada too and i haven't rooted or unlocked my phone.
i just bought a used Mimax today and it says im up to date on 7.3.14 global stable.
Pls, did you sign up to some beta program?
caniranges said:
Pls, did you sign up to a beta program?
Im in canada too and i haven't rooted or unlocked my phone.
i just bought a used Mimax today and it says im up to date on 7.3.14 global stable.
Pls, did you sign up to some beta program?
Click to expand...
Click to collapse
If you're still on miui 7 and you checked for update and it says you're up to date, there's a chance that your rom is currently running a fake global ROM. I had that experience with my Mi 5 before.
Check here http://en.miui.com/download-302.html , global ROM now for hydrogen is 8.1.4.0.
hi
i have a rooted Qin F21 pro with gapps installed via magisk however when trying to use android auto it says error 22, does anyone know how to make it work and fix the error?
Thanks
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I have seen countless error number from AA.. None of them actually finding out why.. The problem is the gapps installed from magisk. Every time i do something like this ( mini gapps, Nickgaps, Hacks with gapps, Google based roms without including gapps but installing them afterwards), i end with an error like this. I have samsung phone. Installing a rom based in Samsung software with gapps included, error gone..
Actually in your case, the error says what is the problem : No pre installed AA. It says you need gapps with AA pre installed.
sosimple said:
I have seen countless error number from AA.. None of them actually finding out why.. The problem is the gapps installed from magisk. Every time i do something like this ( mini gapps, Nickgaps, Hacks with gapps, Google based roms without including gapps but installing them afterwards), i end with an error like this. I have samsung phone. Installing a rom based in Samsung software with gapps included, error gone..
Actually in your case, the error says what is the problem : No pre installed AA. It says you need gapps with AA pre installed.
Click to expand...
Click to collapse
Does making it a system app help? Does that make it like it was pre installed? Or do you know of a gapps that I can flash that has android auto included?
Thanks
pmko1917 said:
Does making it a system app help? Does that make it like it was pre installed? Or do you know of a gapps that I can flash that has android auto included?
Thanks
Click to expand...
Click to collapse
I don't think so, but you could try. I suggest to install a rom based to phone manufacturer.. Samsung, nexus original rom, etc. 99% error will go away.
Otherwise try many custom roms and flash bigger gapps, to find one which works..
hello everyone I would like to ask for your help to see if my device is compatible with the custom rom PixelPlusUI v.4.x but the doubt that my xiaomi has is [SPES or SPESN], I would appreciate your help, I leave screenshots of the specifications in cpu z
link of the rom that I want to install: https://forum.xda-developers.com/t/rom-official-12-1-pixelplusui-v-4-x-spes-spesn.4452395/
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ElPanaRandom said:
hello everyone I would like to ask for your help to see if my device is compatible with the custom rom PixelPlusUI v.4.x but the doubt that my xiaomi has is [SPES or SPESN], I would appreciate your help, I leave screenshots of the specifications in cpu z
link of the rom that I want to install: https://forum.xda-developers.com/t/rom-official-12-1-pixelplusui-v-4-x-spes-spesn.4452395/
Click to expand...
Click to collapse
and need some help to unlock the bootloader to install a custom recovery
This has been answered before. If I am not mistaken you should enter fastboot and then run "fastboot getvar product". As for the "need help" part, I would suggest that you wait a few months since development is in the early stages as of now and can be confusing. Wait for better software and guides to pop up.
Edit: this is the command, granted you know about fastboot /adb. There is another thread, go and look this stuff up.
2nd edit: on your 2nd screenshot, you can see the answer. However, in your first screenshot it says snapdragon 665 which is definitely wrong (same thing on my phone too although I apparently have spesn). As I said previously, wait a bit more to go custom rom especially if you are not 100% sure of what you are doing. It's been the first time since 2012 I have used a stock phone, but I will wait a bit more since custom roms get better day by day. Also easier to work with.
ElPanaRandom said:
hello everyone I would like to ask for your help to see if my device is compatible with the custom rom PixelPlusUI v.4.x but the doubt that my xiaomi has is [SPES or SPESN], I would appreciate your help, I leave screenshots of the specifications in cpu z
link of the rom that I want to install: https://forum.xda-developers.com/t/rom-official-12-1-pixelplusui-v-4-x-spes-spesn.4452395/
Click to expand...
Click to collapse
Your device is Spes, and is indeed compatible with the ROM. Go to the official website to get the latest build for Spes.
[https://ppui.site/download]. Make you download ROM meant for Spes/Specs
Ronny Say said:
Your device is Spes, and is indeed compatible with the ROM. Go to the official website to get the latest build for Spes.
[https://ppui.site/download]. Make you download ROM meant for Spes/Specs
Click to expand...
Click to collapse
Thanks, I unlock the bootloader and installed the custom rom
Ronny Say said:
Your device is Spes, and is indeed compatible with the ROM. Go to the official website to get the latest build for Spes.
[https://ppui.site/download]. Make you download ROM meant for Spes/Specs
Click to expand...
Click to collapse
I use the virtual machine in ubuntu and follow the tutorial on the offical sony website want to flash AOSP android 13 into my 1ii(XQ-AT52) but I stuck at the final step(flash .img into phone) ,becauce there're no .img file in the "product" folder as said in the tutorial.How to solve this problem?
link of tutorial:https://developer.sony.com/develop/open-devices/guides/aosp-build-instructions/build-aosp-android-13
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
In step 5 it says "Build AOSP images that can be flashed", did you ever build one?
Tadashi_Sakura said:
In step 5 it says "Build AOSP images that can be flashed", did you ever build one?
Click to expand...
Click to collapse
What will terminal say after finshed buuild?
My terminal will be normal at the beginning,but after about 15~20 minutes it will stuck(it seems like virtual machine have not enough ram)after another 30 minutes terminal close! but the the number of files in the folder has increased.I'm not sure build is success or not...
Since you can't find any .img file I strongly suspect that the building process is not done yet. And I quite doubt that it is not the ram but the lack of free space of your virtual machine that interrupts the process.
No less than 50GB free space is suggested for building process.
By the way, why not try los 20.0(which is an A13 version of lineagOS)? It seems like clfbbn didnt release it on XDA but you can easily find it on the website.
Here is the download URL:
LineageOS Downloads
download.lineageos.org
And you can find the tutorial here:
Install LineageOS on pdx203 | LineageOS Wiki
wiki.lineageos.org
Tadashi_Sakura said:
Since you can't find any .img file I strongly suspect that the building process is not done yet. And I quite doubt that it is not the ram but the lack of free space of your virtual machine that interrupts the process.
No less than 50GB free space is suggested for building process.
By the way, why not try los 20.0(which is an A13 version of lineagOS)? It seems like clfbbn didnt release it on XDA but you can easily find it on the website.
Here is the download URL:
LineageOS Downloads
download.lineageos.org
And you can find the tutorial here:
Install LineageOS on pdx203 | LineageOS Wiki
wiki.lineageos.org
Click to expand...
Click to collapse
but I have enough space , even available space is more than 50GB! that's why I feel so weird...
lineage may cause PotoPro failure and can't use some unique function made by sony,so lineage I think is not suitable for me~