--------------------------------> DISCLAIMER: <------------------------------------
Guide for pure educational purpose. If you are going to use it, you do it to your risk and danger, I will not be held responsible if your phone will not work anymore.
----------------------------------------------------------------------------------------
This tutorial is for relock the boot loader and restore original stock image on Lenovo Z5 Pro (L78031 - NO-GT version)
For security reason, it's better if you do an Nandroid Backup with the TWRP.
https://forum.xda-developers.com/z5...ow-to-unlock-bootloader-install-twrp-t3890402
I'm not responsable if this operation brick you mobile phone!
How to put the phone in EDL:
1) The phone must be Turn-OFF.
2) Press all two buttons at the same time vol+ and vol- and connect the cable USB.
3) Put the phone in EDL mode only a second before to press the button DOWNLOAD (you must be very very fast otherwise you'll have Sahara error)
Do it
1) Download a Rom: Here you find the 293 and 320 Version (if one give you an error, try the other one), Here you find 342 Version
2) Download and Install ADB Driver: Here or look the Attachments
3) Download and Install Qualcomm Flasher: Qualcomm Flasher Qfil QPST V.2.0.1.9 or look the Attachments
4) download and install Qualcomm Driver: For Windows 32 Bit - For Windows 64 Bit or look the Attachment 32 Bit - Attachments 64bit
5) Download and Install Minimal ADB fastboot from the Attachments
6) Follow this Steps:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Now, Press all two buttons at the same time vol+ and vol- and connect the cable USB to the phone and quickly press Download button!
Done!
Sahara Error: https://forum.xda-developers.com/showpost.php?p=77229641&postcount=2
Sahara Error 2:
Can You provide the password for stock rom zip?
backoffbart said:
Can You provide the password for stock rom zip?
Click to expand...
Click to collapse
I've downloaded, and is not asking me any password...
hi, guy! after my phone back to stock rom, what i have to do to relock bootloader? pls, help me! when i enter to system update: "your system has been root, we are unable to provide the lastest version of the system".
I will find somewhere rom with google apps form Lenovo Z5 Pro?
fuchstruong said:
hi, guy! after my phone back to stock rom, what i have to do to relock bootloader? pls, help me! when i enter to system update: "your system has been root, we are unable to provide the lastest version of the system".
Click to expand...
Click to collapse
Use fastboot command:
fastboot -i 0x2b4c oem lock
see you
BadCluster said:
Use fastboot command:
fastboot -i 0x2b4c oem lock
see you
Click to expand...
Click to collapse
not working :crying: i can't post the image for u to see
my cmd after entering "fastboot -i 0x2b4c oem lock" is "< waiting for any device >"
what should i do?
fuchstruong said:
not working :crying: i can't post the image for u to see
my cmd after entering "fastboot -i 0x2b4c oem lock" is "< waiting for any device >"
what should i do?
Click to expand...
Click to collapse
it seems like the pc don't see the phone
try to reinstall all driver or change PC / Usb cable
ps usb debug is enabled?
BadCluster said:
it seems like the pc don't see the phone
try to reinstall all driver or change PC / Usb cable
ps usb debug is enabled?
Click to expand...
Click to collapse
yes, usb debug is enabled. i can enter in to bootloader mode by using "adb boot bootloader" but using "fastboot -i 0x2b4c oem lock" nothing happen
error QFIL
hi friend, could you help me, by pressing download I get this download fail: firehose fhloader: fail the system can not find the specified file
checo6969 said:
hi friend, could you help me, by pressing download I get this download fail: firehose fhloader: fail the system can not find the specified file
Click to expand...
Click to collapse
hi guy! u try copying rom to C:\Program Files (x86)\Qualcomm\QPST\bin
---------- Post added at 02:32 AM ---------- Previous post was at 02:27 AM ----------
BadCluster said:
--------------------------------> DISCLAIMER: <------------------------------------
Guide for pure educational purpose. If you are going to use it, you do it to your risk and danger, I will not be held responsible if your phone will not work anymore.
----------------------------------------------------------------------------------------
This tutorial is for relock the boot loader and restore original stock image on Lenovo Z5 Pro (L78031 - NO-GT version)
For security reason, it's better if you do an Nandroid Backup with the TWRP.
https://forum.xda-developers.com/z5...ow-to-unlock-bootloader-install-twrp-t3890402
I'm not responsable if this operation brick you mobile phone!
How to put the phone in EDL:
1) The phone must be Turn-OFF.
2) Press all two buttons at the same time vol+ and vol- and connect the cable USB.
3) Put the phone in EDL mode only a second before to press the button DOWNLOAD (you must be very very fast otherwise you'll have Sahara error)
Do it
1) Download a Rom: Here you find the 293 and 320 Version (if one give you an error, try the other one), Here you find 342 Version
2) Download and Install ADB Driver: Here or look the Attachments
3) Download and Install Qualcomm Flasher: Qualcomm Flasher Qfil QPST V.2.0.1.9 or look the Attachments
4) download and install Qualcomm Driver: For Windows 32 Bit - For Windows 64 Bit or look the Attachment 32 Bit - Attachments 64bit
5) Download and Install Minimal ADB fastboot from the Attachments
6) Follow this Steps:
Now, Press all two buttons at the same time vol+ and vol- and connect the cable USB to the phone and quickly press Download button!
Done!
Sahara Error: https://forum.xda-developers.com/showpost.php?p=77229641&postcount=2
Sahara Error 2:
Click to expand...
Click to collapse
hi guy, if i'ld like to lock the bootloader, i can flash any stock rom or i've to flash the first stock rom of it?
will reinstalling the stock rom give back OTA updates?
fuchstruong said:
not working :crying: i can't post the image for u to see
my cmd after entering "fastboot -i 0x2b4c oem lock" is "< waiting for any device >"
what should i do?
Click to expand...
Click to collapse
i have the same problem. i followed all steps from twrp and installing the stock rom, but after all the hastle im not able to lock the bootloader so i still cannot get any updates.
i have the same problem where it says waiting for device. would be nice if there will be a solution for this to get future updates soon!
---------- Post added at 05:16 PM ---------- Previous post was at 04:49 PM ----------
succesful flashed version 355
THIS IS A VERY RISKY OPERATION AND I ALMOST LOST MY PHONE!!
it didnt go as planned.
i installed twrp and created a backup (not of system, is that nesecarry?) to get to when everything got messed up.
and boi, did it get messed up...
problem 1: when trying to install the rom with QFIL for the first time i got a sahara error and the phone lost its OS. i wanted to reinstall the twrp backup as i got really freaked out about losing my phone. somehow it did not get into edl or something and i failed the installation process and ended up with a broken phone with inly TWRP installed.
problem 2: when wanting to reinstall the backup in twrp i got some error saying the \system partition was not mounted. searching online gave me a solution to this problem, but reinstalling the backup still gave errors. on startup i got a "unsuccesful encryption" error, which yielded a useless backup. also after reformatting i got again the /system not mounted error, but now with a "partition is occupied or used" error. even the solutions online wouldnt work, so my online solution was to flash the original rom with QFIL.
solution:
trying to flash the rom resulted in a 1: sahara error, 2: a file not found error and 3: a phone not in EDL error.
when using the QFIL flasher provided by BadCluster i got the first two errors, and there was no quick way of resolving this problem. the post from @Nikorasu of another QFIL programm being used led to to the last error. this was good news as the file not found had been gone and now the only thing i had to do was putting the phone in EDL mode. MANY thanks to Nikorasu!!
trying to flash now resulted in an error where QFIL tried to put the phone in EDL mode, but failed to do so. a article online provided me with the following ADB commands to use. try to open to the bootloader/twrp recovery menu, and using the ADB cmd try to see if your device is connected (command "adb devices"). if so, type the command "adb reboot edl" and the phone will reboot in EDL mode. this was the only thing left to flash the stock rom back.
moral of the story!
1. only do this if you can miss the phone, this will save you a LOT of stress!
2. only do this if you can afford losing your phone!
3. in my case, the TWRP backup was pretty useles. only do this if you can afford to lose data!
4. THE MOST IMPORTANT ONE: NEVER GIVE UP! using the internet you can google every error and eventually get to a solution.
if you have any questions please ask
Well there is no way i can flash the original rom in this device. Is there anybody wanting to do it remotely? I just keep getting the error firehose fhloader: fail the system can not find the specified file
maxihinz said:
Well there is no way i can flash the original rom in this device. Is there anybody wanting to do it remotely? I just keep getting the error firehose fhloader: fail the system can not find the specified file
Click to expand...
Click to collapse
I had the same error, but another version of QFIL solved this for me.
someone posted this in another topic:
https://mega.nz/#!al0WlKTK!Zi23HafWA1uWVjc8kmEMQntW81LuW4_AXMo7BOSVkck
I used this version to successfully flash my device.
anonOmattie said:
I had the same error, but another version of QFIL solved this for me.
someone posted this in another topic:
https://mega.nz/#!al0WlKTK!Zi23HafWA1uWVjc8kmEMQntW81LuW4_AXMo7BOSVkck
I used this version to successfully flash my device.
Click to expand...
Click to collapse
Yes! This was the right tool to flash my device too.
Thank you very much
Can you send me Z5 Pro, persist img, modemst1 and modemst2 img file because I just found out how to unbrick Z5 pro phone after it get bricked down while flashing ROM through qfil, when I was flashing ROM through qfil that time I have selected erase all before download after that my phone has dead it as not booting up full now I have just unbrick my phone using Z5 persist img I need Z5 pro ROM persist img and modemst1 and modemst2 img so that my phone will working full now sensors and sim card are not working due to this three file missing please send me these three img file.
maxihinz said:
Yes! This was the right tool to flash my device too.
Thank you very much
Click to expand...
Click to collapse
very good tohear! enjoiy your lenovo z5 pro
mahegbangar007 said:
Can you send me Z5 Pro, persist img, modemst1 and modemst2 img file because I just found out how to unbrick Z5 pro phone after it get bricked down while flashing ROM through qfil, when I was flashing ROM through qfil that time I have selected erase all before download after that my phone has dead it as not booting up full now I have just unbrick my phone using Z5 persist img I need Z5 pro ROM persist img and modemst1 and modemst2 img so that my phone will working full now sensors and sim card are not working due to this three file missing please send me these three img file.
Click to expand...
Click to collapse
please take a look here:
https://www.mediafire.com/folder/c8x7kcznzwi6b,926v3389w8x7c,u7wu7b08zholk/shared
your files are in here.
help-me
hello, please help me, I bought a lenovo z5 pro gt and tried to unlock the bootloader using the method that you spoke of the site of zuk, choose option Z2 pro and put the serial I got the file by email and I used the command: fastboot flash unlock unlock_bootloader.img, the cell unlock the bootloader but now he does not want to call anymore he got in bootloop n know what to do already tried to use the QFIL + FIRMWARE Stock of lenovo z5 pro gt (L78032)
QFIL LOG VVVVVVV
01:22:15: DEBUG: XML FILE (103 bytes): CharsInBuffer=709-103=606
-------------------------------------------------------------------------------------------
<?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="INFO: Calling handler for program" /></data>
-------------------------------------------------------------------------------------------
01:22:15: INFO: TARGET SAID: 'INFO: Calling handler for program'
01:22:15: DEBUG: XML FILE (126 bytes): CharsInBuffer=606-126=480
-------------------------------------------------------------------------------------------
<?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="ERROR: Failed to open the SDCC Device slot 1 partition 0" /></data>
-------------------------------------------------------------------------------------------
01:22:15: INFO: TARGET SAID: 'ERROR: Failed to open the SDCC Device slot 1 partition 0'
01:22:15: DEBUG: XML FILE (131 bytes): CharsInBuffer=480-131=349
-------------------------------------------------------------------------------------------
<?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="ERROR: Failed to open the device:1 slot:1 partition:0 error:0" /></data>
-------------------------------------------------------------------------------------------
01:22:15: INFO: TARGET SAID: 'ERROR: Failed to open the device:1 slot:1 partition:0 error:0'
01:22:15: DEBUG: XML FILE (123 bytes): CharsInBuffer=349-123=226
-------------------------------------------------------------------------------------------
<?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="ERROR: OPEN handle NULL and no error, weird 344377924" /></data>
-------------------------------------------------------------------------------------------
01:22:15: INFO: TARGET SAID: 'ERROR: OPEN handle NULL and no error, weird 344377924'
01:22:15: DEBUG: XML FILE (132 bytes): CharsInBuffer=226-132=94
-------------------------------------------------------------------------------------------
<?xml version="1.0" encoding="UTF-8" ?>
<data>
<log value="ERROR: Failed to open device, type:eMMC, slot:1, lun:0 error:3" /></data>
-------------------------------------------------------------------------------------------
01:22:15: INFO: TARGET SAID: 'ERROR: Failed to open device, type:eMMC, slot:1, lun:0 error:3'
01:22:15: DEBUG: XML FILE (94 bytes): CharsInBuffer=94-94=0
-------------------------------------------------------------------------------------------
<?xml version="1.0" encoding="UTF-8" ?>
<data>
<response value="NAK" rawmode="false" /></data>
-------------------------------------------------------------------------------------------
01:22:15: DEBUG: Response was 'NAK'
_____
| ___|
| |__ _ __ _ __ ___ _ __
| __| '__| '__/ _ \| '__|
| |__| | | | | (_) | |
\____/_| |_| \___/|_|
01:22:15: {ERROR: handleProgram:8866 program FAILED - Please see log my filehouse error something like that.
Hi, I have a Lenovo z5 pro gt tutorial. I have been able to do unbrick using this tut
Hi, I have a Lenovo z5 pro gt tutorial. I have been able to do unbrick using this tututorial + your lenovo z5 pro tutorial, create a post here on the site to help others I was already desperate
club.lenovo.cn/detail/5433752
---------- Post added at 04:16 PM ---------- Previous post was at 03:56 PM ----------
SrCDA said:
Hi, I have a Lenovo z5 pro gt tutorial. I have been able to do unbrick using this tututorial + your lenovo z5 pro tutorial, create a post here on the site to help others I was already desperate
club.lenovo.cn/detail/5433752
Click to expand...
Click to collapse
I can also unlock the bootloader but when I did the process the unload bootloader was unlocked and unbrick
Related
--- Please don't quote this entire post ---
I have, with the help of two people who's XDA I don't know, just unlocked an Honor 9 Lite without an unlock code!:angel: The method follows:
Initial revision
0. Prepare adb and fastboot. On windows, change all
Code:
fastboot
commands to
Code:
.\fastboot
and similarly for
Code:
adb
(skip to step 2 if you have the June 2018 patch or earlier)
1a. Downgrade firmware to 8.0.0.xxx (June patch) via androidhost.ru - search for your device, get a C432 version.
1b. Downgrade, instructions are in the 'ReleaseDoc' folder. Use the forced install method
(do not reboot the phone until step 3a is complete)
2a. Enter
Code:
fastboot
2b. Enter powershell or terminal and type:
Code:
fastboot oem hwdog certify begin;fastboot oem get-product-model
2c. Send the result to @huaweihax telegram group or in this thread (telegram will have faster response times)
2d. We will send you your slock when we gets a chance. Please be patient, we have real lives. Download it on the same pc as you have fastboot on.
2e. Copy the slock to your working directory
2f. Type in your shell:
Code:
fastboot flash slock <slock_filename>
(Download twrp on the pc that has fastboot, copy to working directory)
3a.
Code:
fastboot flash erecovery_ramdisk <twrp filename>
3b. Read step 3c and 3d
3c.
Code:
fastboot reboot
3d. Hold volume up AFTER the phone vibrates
3e. Twrp should boot up. If not, reboot it and try 3d again
(Each reboot until step 4 is complete, you will restart step 4)
4a. Connect usb
4b.
Code:
adb shell dd if=/dev/block/bootdevice/by-name/nvme of=/tmp/nvme
4c.
Code:
adb pull /tmp/nvme
You may now reboot the device, if you want.
5a. Open the nvme file in a hex editor. Find 'FBLOCK' in the file. There should be '8' shortly before the fblock. Move down exactly one line from '8' and you will see 01. Change that to 00 and repeat for all instances of fblock in the file. Save the file.
5c.
Code:
adb push nvme /tmp/nvme
5d.
Code:
adb shell dd if=/tmp/nvme of=/dev/block/bootdevice/by-name/nvme
6. Reboot!
CONGRATS! YOUR DEVICE IS NOW UNLOCKED!
Latest revision:
0. Prepare adb and fastboot. On windows, change all fastboot commands to ./fastboot and similarly for adb
Skip to step 2 if you have the June 2018 patch or earlier
1a. Downgrade firmware to June patch via androidhost.ru - search for your device, any C number should work.
1b. Downgrade, instructions are in the 'ReleaseDoc' folder. Use the forced install method
2a. Enter fastboot
2b. DO NOT REBOOT THE PHONE UNTIL STEP 3a is complete!!! Failing to follow this will result in anger!
2c. Enter powershell or terminal and type:
Code:
fastboot oem hwdog certify begin;fastboot oem get-product-model;fastboot oem get-build-number
2c. Send the result in the telegram group @huaweiHax (link to the public group is at the start of the channel), or, if that's entirely impossible, PM @OldDroid on XDA.
2d. A nice guy will send you your slock. Please be patient, they have real lives. Download it on the same pc as you have fastboot on.
2e. Copy the slock to your working directory
2f.
Code:
fastboot flash slock <slock_filename>
(Download twrp on the pc that has fastboot, copy to working directory)
3a.
Code:
fastboot flash erecovery_ramdisk <twrp filename>
3b. Read step 3c and 3d
3c.
Code:
fastboot reboot
3d. Hold volume up AFTER the phone vibrates
3e. Twrp should boot up. If not, reboot it and try 3d again
4a. Connect usb
4b.
Code:
adb shell dd if=/dev/block/bootdevice/by-name/nvme of=/tmp/nvme
4c.
Code:
adb pull /tmp/nvme
WARNING: FOLLOW THESE STEPS VERY CAREFULLY AND DOUBLE-CHECK EVERYTHING!
5a. Open the nvme file with a hex editor. Repeat step 5b until you have done all the instances of FBLOCK.
5b. Search the file for FBLOCK. For each instance, you should see the character 8 shortly before. Go down exactly one line from the 8. Select the .. You should see 01 become highlighted in the hex area. Change the 01 to 00 and repeat 6 more times (7 in total). Save the file as nvmepatched
5c.
Code:
adb push nvmepatched /tmp/nvme
5d.
Code:
adb shell dd if=/tmp/nvme of=/dev/block/bootdevice/by-name/nvme
6. Reboot!
CONGRATS! YOUR DEVICE IS NOW UNLOCKED!
----------------------------------------------------------------
Files you might find useful:
nvme.zip: a twrp flashable zip that automates step 5 of the instructions. I have tested it and it works fine for me. If TWRP crashes and restarts, that's fine, but idk why it happens. If it happens to you, please send /tmp/recovery.log to me in pm or here, or in telegram
autoroot.zip: a zip file containing a python script and related files to automatically unlock Huawei's. To use it, put a twrp file called 'twrp-kirin.img' in the 'files' subfolder. I cannot upload that file due to XDA file size restrictions.
https://www.androidfilehost.com/?w=files&flid=285583: thanks to @mrmazak, this is a windows batch tool version of autoroot.zip
In the attached photos you will see correct and incorrect converted "slock files"
When you follow the guide from above. Between 2-C and 2-D.
If the you get just a long string of letters and numbers (512 characters to be exact). That string of numbers it that state is "text" it needs to be "HEX". , to do this there are command line tools to do it. But it can be done in a user friendly way in a hex editor program. But this needs to done as hex and not text. The photos show both examples.
In the correct edited photo the long string is written to the left side (the hex area)
In the incorrect edited photo the long string is written to the right side (the text area).
SLOCK CONVERSION
FOR command line use
Copy the long string of text as regular txt file NO EXTRA SPACES -- for this example name it slock.txt
Command line code for linux: Needs "XDD" It should already be installed on most systems.(inside VIM)
Code:
cat slock.txt | xxd -r -p > binary-slock.bin
Command line code for Windows: Needs "XDD.exe" It canbe found inside VIM http://www.vim.org/
Code:
type slock.txt | xxd.exe -r -p > binary-slock.bin
NVME EDITS
Linux terminal
Code:
sed 's/\x46 \x42 \x4C \x4F \x43 \x4B \x00 \x00 \x01 \x00 \x00 \x00 \x01/\x46 \x42 \x4C \x4F \x43 \x4B \x00 \x00 \x01 \x00 \x00 \x00 \x00/g' nvme > temp
Windows cmd version needs GNU-SED
OR
reg-expression-tool LIKE "jrepl.bat" (one of my favorite little tools)
Code:
files\JREPL.BAT "\x46\x42\x4C\x4F\x43\x4B\x00\x00\x01\x00\x00\x00\x01" "\x46\x42\x4C\x4F\x43\x4B\x00\x00\x01\x00\x00\x00\x00" /m /x /f modified-nvme /o -
Scripted method
Windows batch file tool
Use newest version in the folder. And allow tool to update, when first ran.
.
.
mrmazak said:
this sounds like great news for continuing custom roms on Huawei.
Just want to ask about the above section.
Are you saying just the sending of data will be rolled into an app, or the whole thing will be self contained in an app?
Click to expand...
Click to collapse
Just the second stage of sending data, olddroid is 'thinking' about making them both automated, but right now, neither is.
hackintosh5 said:
Just the second stage of sending data, olddroid is 'thinking' about making them both automated, but right now, neither is.
Click to expand...
Click to collapse
It'd be really helpful if he did that. And by the way thanks for sharing.
Hi my phone version is c185 what should i do?
moonknight01 said:
Hi my phone version is c185 what should i do?
Click to expand...
Click to collapse
Try to use the c00 firmware, it may or may not dload. If it fails, theres not much you can do.
hackintosh5 said:
Try to use the c00 firmware, it may or may not dload. If it fails, theres not much you can do.
Click to expand...
Click to collapse
In c185 wouldnt work?
Sent from my LLD-L21 using Tapatalk
moonknight01 said:
In c185 wouldnt work?
Click to expand...
Click to collapse
There's no c185 dloadfirmware, so try c432. It may fail the install, it might not. I just don't know.
Honor 9 lite c636
Can C636 work?
aldinista said:
Can C636 work?
Click to expand...
Click to collapse
Again, try another firmware like c432 or c00, but it all depends on whether the dload works or not. If it doesn't install, you'll have to find one that does. If it installs you'll be ok. Just flash the correct model firmware after completing the exploit
hackintosh5 said:
Again, try another firmware like c432 or c00, but it all depends on whether the dload works or not. If it doesn't install, you'll have to find one that does. If it installs you'll be ok. Just flash the correct model firmware after completing the exploit
Click to expand...
Click to collapse
Oke i try.. ?
Hehehe, sorry because I'm not yet so familiar.
I'm still a beginner ??
@hackintosh5
My LLD-L21 (C636) bricked with Bootloader is Relocked & FRP Locked, but has been solved now with the help of your tutorial.
Thanks you so much sir. :good::good::good:
Wait but how can you flash something from fastboot if the bootloader is locked?
Fredin_ said:
Wait but how can you flash something from fastboot if the bootloader is unlocked?
Click to expand...
Click to collapse
Please unquote the entire post... Then I'll respond.
It beggars belief sometimes..........I mean its the very FIRST line in the bloody post.........???
What more can you do, even it was in BIG RED CAPITALS it would still happen.
Sparkrite said:
It beggars belief sometimes..........I mean its the very FIRST line in the bloody post.........???
What more can you do, even it was in BIG RED CAPITALS it would still happen.
Click to expand...
Click to collapse
Dude chill......... was a mistake sorry ?
---------- Post added at 06:12 PM ---------- Previous post was at 06:12 PM ----------
hackintosh5 said:
Please unquote the entire post... Then I'll respond.
Click to expand...
Click to collapse
Sorry forgot that part ?
Fredin_ said:
Dude chill......... was a mistake sorry ?
---------- Post added at 06:12 PM ---------- Previous post was at 06:12 PM ----------
Sorry forgot that part ?
Click to expand...
Click to collapse
Okay
Fredin_ said:
Wait but how can you flash something from fastboot if the bootloader is locked?
Click to expand...
Click to collapse
Slock and rescue_recovery can be flashed without unlocking. Don't ask me why, ask Wavei.
hackintosh5 said:
Slock and rescue_recovery can be flashed without unlocking. Don't ask me why, ask Wavei.
Click to expand...
Click to collapse
K thanks man?
SeenThings said:
@hackintosh5
My LLD-L21 (C636) bricked with Bootloader is Relocked & FRP Locked, but has been solved now with the help of your tutorial.
Thanks you so much sir. :good::good::good:
Click to expand...
Click to collapse
Hi bro did you get unlock boot loader?
Sent from my LLD-L21 using Tapatalk
Recently by accident I downgraded the operating system on my Moto G7 Plus device (XT1965-3) and hard bricked my phone. :crying:
It took me some days on checking different threads to come to a solution. I managed to create a blankflash file that finally recovered my bootloader so that I could get into fastboot mode and flash the latest OS.
For those who are faced with the same problem, I'd like to share my solution and hope it works for you as well.
When the phone is hard bricked, it do not boot, it stays in black screen. The good thing though is that by default it goes into Qualcomms EDL (Emergency DownLoad) mode.
When connecting your phone to the PC (e.g. Windows 10) you should see in the device manager under COM the following device:
Qualcomm HS-USB QDLoader 9008 (COM..)
If this do not show up, unplug the phone, press Power + VolumeDown for about 30 seconds and connect the device again.
If it still not works, you might search for the correct drivers.
Assuming you see the device as mentioned above, then you can do the blankflash.
Open a cmd window (ideally with Administrator rights)
Unzip the blankflash.zip View attachment blankflash.zip
Run blank-flash.bat
This should download the bootloader and your phone should get back to live (in fastboot mode)
After you have fixed the bootloader you can flash the latest OS with fastboot mode.
Download the latest version from: https://mirrors.lolinet.com/firmwar...ubsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
Unzip the ROM and add the following files to the same directory View attachment FastBootAddOnFiles.zip
Connect the phone in fastboot mode
Run flashfile.bat from a cmd window
Now the ROM is flashed to the phone
Hope this helps recovering your phone!
Does it work for the power of Moto g7?
Anyway this works on unlocked g7? I need a blank flash or something to revive my hard bricked device
is it possible to restore previously unlocked phone to out-of-the-box software and behaviour? specifically I would like to get rid of the bootloader warning and verity disabled message at boot. I wouldn't mind locking again
"Waiting for device"
Hi WinnieH.
First off, i would like to thank you for explaining the necessity of the blankflash to recover the bootloader.
But when i try the steps you suggested, nothing happens. I get stuck in the message "Waiting for device..."
I noticed that the main command in the bat file is just: ".\qboot.exe blank-flash %*".
Wouldn't be necessary a reference to the singleimage.bin file in this command? Or maybe is a file missing in the zip.
I appreciate some suggestion.
Thanks,
Marcos
mrufino said:
Hi WinnieH.
First off, i would like to thank you for explaining the necessity of the blankflash to recover the bootloader.
But when i try the steps you suggested, nothing happens. I get stuck in the message "Waiting for device..."
I noticed that the main command in the bat file is just: ".\qboot.exe blank-flash %*".
Wouldn't be necessary a reference to the singleimage.bin file in this command? Or maybe is a file missing in the zip.
I appreciate some suggestion.
Thanks,
Marcos
Click to expand...
Click to collapse
Sorry for late response.
if the message "Waiting for device ..." comes, then your phone is not recognized correctly. Your device when bricked should connect in Emergency Download (EDL) mode. You could see this when you go to the Windows Device Manager. Under the COM devices your phone should show up with the Qualcomm. If not, disconnect the phone for a minute and try it again.
If you have the driver not installed it, the installation video might help: https://www.youtube.com/watch?v=ezQJlBKN9hk
PS: The blank-flash.bat is fine. It will automatically use the singleimage.bin file
Hope you get your way
Thank you WinnieH for the response. (that was not late at all!).
I will try to install the driver; I was unable to connect in Emergency Download Mode.
mrufino said:
Thank you WinnieH for the response. (that was not late at all!).
I will try to install the driver; I was unable to connect in Emergency Download Mode.
Click to expand...
Click to collapse
Well, first of all thanks to WinnieH for this useful thread. It worked fine for my phone.
@mrufino Maybe you have to install the moto drivers. Or try a different pc. The phone was not detected on my first pc, on my other pc it was detected immediately.
WinnieH said:
Recently by accident I downgraded the operating system on my Moto G7 Plus device (XT1965-3) and hard bricked my phone. :crying:
It took me some days on checking different threads to come to a solution. I managed to create a blankflash file that finally recovered my bootloader so that I could get into fastboot mode and flash the latest OS.
For those who are faced with the same problem, I'd like to share my solution and hope it works for you as well.
When the phone is hard bricked, it do not boot, it stays in black screen. The good thing though is that by default it goes into Qualcomms EDL (Emergency DownLoad) mode.
When connecting your phone to the PC (e.g. Windows 10) you should see in the device manager under COM the following device:
Qualcomm HS-USB QDLoader 9008 (COM..)
If this do not show up, unplug the phone, press Power + VolumeDown for about 30 seconds and connect the device again.
If it still not works, you might search for the correct drivers.
Assuming you see the device as mentioned above, then you can do the blankflash.
Open a cmd window (ideally with Administrator rights)
Unzip the blankflash.zip View attachment 4810965
Run blank-flash.bat
This should download the bootloader and your phone should get back to live (in fastboot mode)
After you have fixed the bootloader you can flash the latest OS with fastboot mode.
Download the latest version from: https://mirrors.lolinet.com/firmwar...ubsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
Unzip the ROM and add the following files to the same directory View attachment 4810964
Connect the phone in fastboot mode
Run flashfile.bat from a cmd window
Now the ROM is flashed to the phone
Hope this helps recovering your phone!
Click to expand...
Click to collapse
Great post. Where did you find the singleimage for your phone? i've tryed to do with my G7 RIVER bricked, but unsuccessful need some help!
diegovmsouza said:
Great post. Where did you find the singleimage for your phone? i've tryed to do with my G7 RIVER bricked, but unsuccessful need some help!
Click to expand...
Click to collapse
Hello,
I did the image by myself. I used a older image of a G6 device and replace a number of elements in the image from the stockrom. With "star" you can delete and add files to the "singleimage.bin" archive. It took me some trials. Check on the latest STOCK ROM "XT1965-3_LAKE_RETEU_9.0_PPWS29.98-111-3_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml" from https://mirrors.lolinet.com/firmware/moto/lake/official/RETEU/ and you should find the most important files (such as partition table: gpt.bin).
Hope it works for you
Regards
Winnie
WinnieH said:
Hello,
I did the image by myself. I used a older image of a G6 device and replace a number of elements in the image from the stockrom. With "star" you can delete and add files to the "singleimage.bin" archive. It took me some trials. Check on the latest STOCK ROM "XT1965-3_LAKE_RETEU_9.0_PPWS29.98-111-3_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml" from https://mirrors.lolinet.com/firmware/moto/lake/official/RETEU/ and you should find the most important files (such as partition table: gpt.bin).
Hope it works for you
Regards
Winnie
Click to expand...
Click to collapse
Thanks for the answer. Trying to use "Star" I noticed that the files that are inside singleimage.bin are actually files that are inside bootloader.img right? How do I extract the bootloader.img file to use his files? I use linux but I have windows too.
diegovmsouza said:
Thanks for the answer. Trying to use "Star" I noticed that the files that are inside singleimage.bin are actually files that are inside bootloader.img right? How do I extract the bootloader.img file to use his files? I use linux but I have windows too.
Click to expand...
Click to collapse
Just use "star list bootloader.img" and you get all the relevant file.
Code:
star list ..\..\XT1965-3_LAKE_RETEU_9.0_PPWS29.98-111-3_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml\bootloader.img
1 339968 md5:e4c77bb1f8862444bedb908067d5063d abl.elf
2 519296 md5:4b8eaa75b77eae4981604f7893bf7279 cmnlib.mbn
3 519296 md5:ac35656340c5f87037a64ce4f937b16c cmnlib64.mbn
4 2722 md5:d3ee34bff4d352a045b7e42b447666a7 default.xml
5 126080 md5:4590a7b21b0d70d4403fa95ad23a6e9d devcfg.mbn
6 38400 md5:27ba16d71e0d16c86423192d5615a25c gpt.bin
7 519296 md5:0582b648798303e0441930fd84a39b9a hyp.mbn
8 519296 md5:2686fd49e16e78a0e9ef2335104e96bc keymaster.mbn
9 125 md5:c3a63b25166c5fcac0cc1426bf44a271 pkg.xml
10 519296 md5:1437d90bab43816d4a3541b18edac61c pmic.elf
11 257152 md5:5e3b6f2cf09747bd3bac33023c2014a7 prov64.mbn
12 519296 md5:31ab4015a996f2ad6dd61c94076fea98 rpm.mbn
13 126080 md5:5054d3c7863d09d6333c509003548e4d storsec.mbn
14 2092160 md5:44a6f561bab5d2822066574e3d0116eb tz.mbn
15 3665024 md5:a2a5945cf2ae44cd95da3ee180480662 xbl.elf
16 172 md5:1fd033214e7e36c4134a927f1ce944f0 index.xml
17 606400 md5:4b6e1345d3fb9b347ce7fc6357def85a programmer.elf
Extract the files from the bootloader and replace them on the singleimage.bin and thats it.
e.g.
Code:
star delete abl.elf
star add abl.elf
Pressing thumbs
WinnieH said:
Just use "star list bootloader.img" and you get all the relevant file.
Code:
star list ..\..\XT1965-3_LAKE_RETEU_9.0_PPWS29.98-111-3_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml\bootloader.img
1 339968 md5:e4c77bb1f8862444bedb908067d5063d abl.elf
2 519296 md5:4b8eaa75b77eae4981604f7893bf7279 cmnlib.mbn
3 519296 md5:ac35656340c5f87037a64ce4f937b16c cmnlib64.mbn
4 2722 md5:d3ee34bff4d352a045b7e42b447666a7 default.xml
5 126080 md5:4590a7b21b0d70d4403fa95ad23a6e9d devcfg.mbn
6 38400 md5:27ba16d71e0d16c86423192d5615a25c gpt.bin
7 519296 md5:0582b648798303e0441930fd84a39b9a hyp.mbn
8 519296 md5:2686fd49e16e78a0e9ef2335104e96bc keymaster.mbn
9 125 md5:c3a63b25166c5fcac0cc1426bf44a271 pkg.xml
10 519296 md5:1437d90bab43816d4a3541b18edac61c pmic.elf
11 257152 md5:5e3b6f2cf09747bd3bac33023c2014a7 prov64.mbn
12 519296 md5:31ab4015a996f2ad6dd61c94076fea98 rpm.mbn
13 126080 md5:5054d3c7863d09d6333c509003548e4d storsec.mbn
14 2092160 md5:44a6f561bab5d2822066574e3d0116eb tz.mbn
15 3665024 md5:a2a5945cf2ae44cd95da3ee180480662 xbl.elf
16 172 md5:1fd033214e7e36c4134a927f1ce944f0 index.xml
17 606400 md5:4b6e1345d3fb9b347ce7fc6357def85a programmer.elf
Extract the files from the bootloader and replace them on the singleimage.bin and thats it.
e.g.
Code:
star delete abl.elf
star add abl.elf
Pressing thumbs
Click to expand...
Click to collapse
thanks for listening. When I list the bootloader.iso file it returns me the following error: "Failed: simg_open () -> IO error". already extract the rom stock again, already downloaded it from scratch and the result is the same. When I extract the bootloader.iso file the same error occurs. what could it be? Can you help me extract these files? I am attaching the bootloader file of moto g7 river, if you can help me I will be immensely grateful.
diegovmsouza said:
thanks for listening. When I list the bootloader.iso file it returns me the following error: "Failed: simg_open () -> IO error". already extract the rom stock again, already downloaded it from scratch and the result is the same. When I extract the bootloader.iso file the same error occurs. what could it be? Can you help me extract these files? I am attaching the bootloader file of moto g7 river, if you can help me I will be immensely grateful.
Click to expand...
Click to collapse
Hello,
you are right. I should have written down how I created the singleimage.bin file. I replaced the following files in the singleimage.bin from the river stock rom version: XT1962-6_RIVER_RETEU_PPOS29.114-134-2_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml (loaded from: https://mirrors.lolinet.com/firmware/moto/river/official/RETEU/)
gpt.bin
And changed the index.xml to the right CPU 632
You might to play around with the board id if it do not work (board id="204"). I hope the programmer file is the same for the G7 (processor type is slightly different: Snapdragon 632 instead of 636).
Give it a try with attached blankflashRiver.zip
WinnieH said:
Hello,
you are right. I should have written down how I created the singleimage.bin file. I replaced the following files in the singleimage.bin from the river stock rom version: XT1962-6_RIVER_RETEU_PPOS29.114-134-2_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml (loaded from: https://mirrors.lolinet.com/firmware/moto/river/official/RETEU/)
gpt.bin
And changed the index.xml to the right CPU 632
You might to play around with the board id if it do not work (board id="204"). I hope the programmer file is the same for the G7 (processor type is slightly different: Snapdragon 632 instead of 636).
Give it a try with attached blankflashRiver.zip
Click to expand...
Click to collapse
Thanks for the help. the Programmer file isn't the same. After to work arround and beat my head over and over on the wall, I've took my phone to an authorized Motorola. For my surprise, as my phone shows oem_lock, they accepted on warranty. LOL. Now it's on repair and I'll catch tomorrow or another. Thanks for all. Thumbs up!
Rooting with patch security agost 2019
Hello
does this method work for the security patch of august 1, 2019?
does it works in moto g7 power? or others ways that qualcomm port not send error
I tryed in windows 7x64,10x64 without response, it shows me an error port just every time, qualcom usb drivers are shows correct ,
I cant continues with the fastboot part, people any advice?
diegovmsouza said:
Thanks for the answer. Trying to use "Star" I noticed that the files that are inside singleimage.bin are actually files that are inside bootloader.img right? How do I extract the bootloader.img file to use his files? I use linux but I have windows too.
Click to expand...
Click to collapse
Greetings Winnieh !, thanks for all the time and good information that you post,
I have doubts I would appreciate some advice, I have a motorola g7 power (ocean) tha's in hardbrick mode, I have already installed the correct qualcom drivers, the com port recognizes my device, but I cannot get the file blankflash.bat to load the phone to the moment executing it gives me an error:
Motorola qboot utility version 3.86
[ -0.000] Opening device: \\.\COM3
[ 0.003] Detecting device
[ 2.218] ReadFile() failed, GetLastError()=0
[ 11.019] ERROR: sahara_greet_device()->device_open()->error opening device
[ 11.019] Check qboot_log.txt for more details
[ 11.019] Total time: 11.019s
FAILED: qb_flash_singleimage()->sahara_greet_device()->device_open()->error open
ing device
I realize that the blankflash.bat for the motog7 + version (river)
based on the blankflash file that you attached
I extracted the bootloader.img files from the stockrom of the motog7 power (ocean) XT1955-2 XT1955-2_OCEAN_AMX_9.0_PPO29.80-79_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml , so also delete and add all the files to the singleimpt.bin file - the gpt.bin file from stock rom copy and replace the one I saw in singleimage.bin
what you notice that index.xml refers to as "cpu.name: msm8953"
it also appears the same in the gpt.bin file, finally with the new singleimage.bin file compiled try to run the blankflash.bat again
unsuccessfully....
Could you tell me what are the mistakes that I can't solve?
i'm not a programmer just a bad lucky pal. if by chance have you a blankflash.bat for ocean version?, i'll really appreciate
Thank you! for your time
Hi WinnieH, I have a similar problem with a Moto G7 Power, can you tell me how I can create a blankflash for my specific model?
Lupask said:
is it possible to restore previously unlocked phone to out-of-the-box software and behaviour? specifically I would like to get rid of the bootloader warning and verity disabled message at boot. I wouldn't mind locking again
Click to expand...
Click to collapse
I have this exact same situation. did you find a solution to it?
Hello guys, in this guide I will tell you how to unlock the bootloader of the Moto E6 Plus.
READ THE FULL GUIDE TO AVOID ERRORS IN THE PROCESS SINCE THIS UNLOCKING METHOD IS DIFFERENT FROM OTHER MOTOROLA PHONE.
DISCLAIMER:
Code:
/*
*
* Your warranty is now void.
* I am not responsible for bricked devices, dead SD cards, or you getting fired because the alarm app failed.
* Please do some research if you have any concerns about features included in this system image before flashing it!
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device,
* I will laugh at you.
*
*/
What we will do first is a downgrade to version 76 of firmware since the new versions it's not allowed unlock bootloader, for this we will use SP Flash Tool v5.1916 (since the most current version does not give an error) and later we will flash some files for complete the unlock bootloader besides that we will install TWRP to install some GSI since the stock system it cannot be used.
This process is for 32/2 and 64/4 variant.
Links of download at the end of the post.
WARNING: THIS PROCESS ERASES ALL USER DATA AND VOIDS THE WARRANTY IN ADDITION THAT THE SYSTEM STOCK CANNOT BE USED.
Spoiler: PROCESS OF THE UNLOCK WITH WINDOWS
Prerequisites:
A computer with Windows (bruh)
ADB and Fastboot installed
Have installed the device drivers to be detected in fastboot mode.
Have downloaded the lk, vbmeta and recovery files.
Have downloader SP Flashtool and the ROM to downgrade.
READ THE FULL GUIDE TO AVOID ERRORS IN THE PROCESS SINCE THIS UNLOCKING METHOD IS DIFFERENT FROM OTHER MOTOROLA PHONE.
Once the necessary files have been downloaded the process is the following"
Unpack the SP Flash Tool and open "flash_tool.exe" file.
Once opened the app they will have to press up to the right the section "Options" and select "Option", when i open them they have to uncheck the second option.
Then close the window and in the "Download-Agent" press in "Choose" and search inside the unzipped zip folder a file named "DA_SWSEC_1848_PTA29.76.bin" or similary and select it. Then in "Scatter-loading File" press in "Choose" and just like before navigate to the same rute and select the file "MT6765_Android_scatter" and click on "Ok", and in "Authentication File" some select "Choose" and select "auth_sv5.auth" file and click in "Ok".
Now remove the battery of the phone and in Flash Tool press on "Donwload" and connect the phone without battery and start to flash.
Once the flashing finishes place the battery again and boot it in FASTBOOT (not system), then in terminal put the next command to unlock the bootloader:
Code:
fastboot flashing unlock_critical
And press Volume + in the phone to unlock the bootlaoder and DO NOT reboot still
Spoiler: If you logged into the system directly
In case of having started in the system without installing the files, you will have to start in the recovery mode and do a factory format.
After that you can flash the files from fastboot.
Now flash the lk, vbmeta and twrp files with the next commands:
Code:
fastboot flash lk lk.img
fastboot flash vbmeta vbmeta.img
fastboot flash recovery twrp.img
Now restart in recovery and go to Wipe > System > Advanced options > Resize.
Without this it would appear that there is 8GB of memory instead of 32/64.Now it only remains to flash the GSI.
Spoiler: PROCESS OF THE UNLOCK WITH LINUX
Prerequisites:
A computer with Linux (bruh)
ADB and Fastboot installed
Have downloaded the lk, vbmeta and recovery files.
Have downloader SP Flashtool and the ROM to downgrade.
READ THE FULL GUIDE TO AVOID ERRORS IN THE PROCESS SINCE THIS UNLOCKING METHOD IS DIFFERENT FROM OTHER MOTOROLA PHONE.
Once the necessary files have been downloaded the process is the following
Unpack the SP Flash Tool, and mark as to executable "flash_tool" file and open as superuser, if you don't know the commands are the following:
Code:
sudo chmod +x flash_tool
sudo ./flash_tool
Now in the "Download-Agent" press in "Choose" and search inside the unzipped zip folder a file named "DA_SWSEC_1848_PTA29.76.bin" or similary and select it. Then in "Scatter-loading File" press in "Choose" and just like before navigate to the same rute and select the file "MT6765_Android_scatter" and click on "Ok", and in "Authentication File" some select "Choose" and select "auth_sv5.auth" file and click in "Ok".
Now remove the battery of the phone and in Flash Tool press on "Donwload" and connect the phone without battery and start to flash.
Once the flashing finishes place the battery again and boot it in FASTBOOT (not system), then in terminal put the next command to unlock the bootloader:
Code:
sudo fastboot flashing unlock_critical
And press Volume + in the phone to unlock bootloader and DO NOT reboot still.
Spoiler: If you logged into the system directly
In case of having started in the system without installing the files, you will have to start in the recovery mode and do a factory format.
After that you can flash the files from fastboot.
Now flash the lk, vbmeta and twrp files with the next commands:
Code:
sudo fastboot flash lk lk.img
sudo fastboot flash vbmeta vbmeta.img
sudo fastboot flash recovery twrp.img
Now restart in recovery and go to Wipe > System > Advanced options > Resize.
Without this it would appear that there is 8GB of memory instead of 32/64.Now it only remains to flash the GSI.
If you don't know which GSI to try first, I recommend one from Phhusson, Ermitain or Andy.
NOTE: The system will be encrypted, and in this build of TWRP the encryption is not support so the files of internal storage will appear with numbers and letters random, if you want to remove the encryption flash the dm-verity.
NOTE 2: After unlocking the bootloader you can update the firmware to the latest version, but you will have to flash the lk and vbmeta files again (besides of recovery).
NOTE 3: The GSI architectures for each variant are: A64 AB for 32/2 and ARM64 AB for 64/4.
NOTE 4: If you are going to flash a GSI with GApps you will first have to flash a vanilla Phhusson GSI and start in it, after that you have to flash the GSI with GApps WITHOUT wipes and you can use it normally
Links of download:
ROM to downgrade : https://mirrors.lolinet.com/firmware/moto/pokerp/official/RETLA/ (the one that says in the name 32B its for 32/2 variant and the one that says in the name 64B its for 64/4 variant, bruh)
SP Flashtool: https://spflashtool.com/download/ (download the 5.1916 version)
ADB and Fastboot (Windows only): https://androiddatahost.com/uq6us
lk, vbmeta and TWRP files: https://drive.google.com/drive/folders/19wDFLDOoFTIDO-sv3vxWJ-CUEG1Q3sl-?usp=sharing
Credits:
@eluallen to do the first guide of how to unlock the bootloader and vbmeta file.
@Siddk for the recovery.
@LichtEstarossx for lk file and give some development to pokerp ;-;.
Fastoh said:
Hello guys, in this guide I will tell you how to unlock the bootloader of the Moto E6 Plus
DISCLAIMER:
Code:
/*
*
* Your warranty is now void.
* I am not responsible for bricked devices, dead SD cards, or you getting fired because the alarm app failed.
* Please do some research if you have any concerns about features included in this system image before flashing it!
* YOU are choosing to make these modifications, and if you point the finger at me for messing up your device,
* I will laugh at you.
*
*/
What we will do first is a downgrade to version 76 of firmware since the new versions it's not allowed unlock bootloader, for this we will use SP Flash Tool v5.1916 (since the most current version does not give an error) and later we will flash some files for complete the unlock bootloader besides that we will install TWRP to install some GSI since the stock system it cannot be used.
This process is for 32/2 and 64/4 variant.
WARNING: THIS PROCESS ERASES ALL USER DATA AND VOIDS THE WARRANTY IN ADDITION THAT THE SYSTEM STOCK CANNOT BE USED.
Spoiler: PROCESS OF THE UNLOCK IN WINDOWS
Once the necessary files have been downloaded the process is the following"
Unpack the SP Flash Tool and open "flash_tool.exe" file.
Once opened the app they will have to press up to the right the section "Options" and select "Option", when i open them they have to uncheck the second option.
Then close the window and in the "Download-Agent" press in "Choose" and search inside the unzipped zip folder a file named "DA_SWSEC_1848_PTA29.76.bin" or similary and select it. Then in "Scatter-loading File" press in "Choose" and just like before navigate to the same rute and select the file "MT6765_Android_scatter" and click on "Ok", and in "Authentication File" some select "Choose" and select "auth_sv5.auth" file and click in "Ok".
Now remove the battery of the phone and in Flash Tool press on "Donwload" and connect the phone without battery and start to flash.
Once the flashing finishes place the battery again and boot it in FASTBOOT (not system), then in terminal put the next command to unlock the bootloader:
Code:
fastboot flashing unlock_critical
And press Volume + in the phone to unlock the bootlaoder and DO NOT reboot still
Now flash the lk, vbmeta and twrp files with the next commands:
Code:
fastboot flash lk lk.img
fastboot flash vbmeta vbmeta.img
fastboot flash recovery twrp.img
Now reboot to recovery and flash some GSI
If you don't know which try first with the GSI of Phhusson or Lineage of Andy
Spoiler: PROCESS OF THE UNLOCK IN LINUX
Once the necessary files have been downloaded the process is the following
Unpack the SP Flash Tool, and mark as to executable "flash_tool" file and open as superuser, if you don't know the commands are the following:
Code:
sudo chmod +x flash_tool
sudo ./flash_tool
Now in the "Download-Agent" press in "Choose" and search inside the unzipped zip folder a file named "DA_SWSEC_1848_PTA29.76.bin" or similary and select it. Then in "Scatter-loading File" press in "Choose" and just like before navigate to the same rute and select the file "MT6765_Android_scatter" and click on "Ok", and in "Authentication File" some select "Choose" and select "auth_sv5.auth" file and click in "Ok".
Now remove the battery of the phone and in Flash Tool press on "Donwload" and connect the phone without battery and start to flash.
Once the flashing finishes place the battery again and boot it in FASTBOOT (not system), then in terminal put the next command to unlock the bootloader:
Code:
sudo fastboot flashing unlock_critical
And press Volume + in the phone to unlock bootloader and DO NOT reboot still
Now flash the lk, vbmeta and twrp files with the next commands:
Code:
sudo fastboot flash lk lk.img
sudo fastboot flash vbmeta vbmeta.img
sudo fastboot flash recovery twrp.img
Now reboot to recovery and flash some GSI.
if you don't know which try first with the GSI of Phhusson or Lineage of Andy
NOTE: The system will be encrypted, if you want to remove the encryption flash the dm-verity.
NOTE 2: After unlocking the bootloader you can update the firmware to the latest version, but you will have to flash the lk and vbmeta files again (besides of recovery).
Links of download:
ROM to downgrade : https://mirrors.lolinet.com/firmware/moto/pokerp/official/RETLA/ (the one that says in the name 32B its for 32/2 variant and the one that says in the name 64B its for 64/4 variant, bruh)
SP Flashtool: https://spflashtool.com/download/ (download the 5.1924 version)
ADB for Windows: https://androiddatahost.com/uq6us
lk, vbmeta and TWRP files: https://drive.google.com/folderview?id=19wDFLDOoFTIDO-sv3vxWJ-CUEG1Q3sl-&usp=sharing
Click to expand...
Click to collapse
I've been looking for GSI-Treble support,
And my system drops this.
So in various posts people say "For this phone we have to install GSI aonly-Arm32"
I don't know what Is The Correct One And I Need Help
ShotRomsS6edge said:
I've been looking for GSI-Treble support,
And my system drops this.
So in various posts people say "For this phone we have to install GSI aonly-Arm32"
I don't know what Is The Correct One And I Need Help
Click to expand...
Click to collapse
Ahí te dice en la imagen, las GSIs compatibles son las que son A64 xd // There it tells you in the image, the compatible GSIs are those that are A64 xd
Dont get it, there is way too many fake websites with USB drivers for ADB and fastboot and none of them are working, ive tried your adb driver aswell but once I get into fastboot windows just says: Android device with a 28 error code which means that there is no driver installed, could you give me the link?
EDIT: adb only works when the device has booted.
simbanono said:
Dont get it, there is way too many fake websites with USB drivers for ADB and fastboot and none of them are working, ive tried your adb driver aswell but once I get into fastboot windows just says: Android device with a 28 error code which means that there is no driver installed, could you give me the link?
EDIT: adb only works when the device has booted.
Click to expand...
Click to collapse
What is missing are the drivers, try to download them from this link (is the link that came in the flash tool zip xd): https://androiddatahost.com/276a2
Fixed already ty
.
somebody know how to unlock bootloader moto e6 play xt2029-1? im trying to unlock bootloader and everthing i try it fails, please help me :c
cyanogenmodricky said:
somebody know how to unlock bootloader moto e6 play xt2029-1? im trying to unlock bootloader and everthing i try it fails, please help me :c
Click to expand...
Click to collapse
mmmmm, maybe downgrading to the oldest firmware version you can find
Fastoh said:
mmmmm, maybe downgrading to the oldest firmware version you can find
Click to expand...
Click to collapse
Well, that is what I have tried to do and spflashtools gives me many problems with this model :c
cyanogenmodricky said:
Well, that is what I have tried to do and spflashtools gives me many problems with this model :c
Click to expand...
Click to collapse
try the version of sp flashtool that uses LMSA
in the log it says which version
Fastoh said:
try the version of sp flashtool that uses LMSA
in the log it says which version
Click to expand...
Click to collapse
ohh ok, i will try it and i tell you if works :3
well i get make downgrade to the lowest version i found, now i can't unlock the bootloader with
fastboot flashing unlock_critical
it gives me "waiting device" :c
edit: i install adb, fastboot and moto drivers, now when i wirte fastboot flashing unlock appears "unknow command"
hey hi,i have a problem, so i did everything as you write it but when i did the flashtool thing it didn't recognize the phone, but it was making contact, i installed a lot of drivers until one of them make it work, so when i did the fastboot thing it wasn't recognize the phone again, what can i do? my phone is the 32/2 version
Alejandro2810 said:
hey hi,i have a problem, so i did everything as you write it but when i did the flashtool thing it didn't recognize the phone, but it was making contact, i installed a lot of drivers until one of them make it work, so when i did the fastboot thing it wasn't recognize the phone again, what can i do? my phone is the 32/2 version
Click to expand...
Click to collapse
what SO do you use? windows or linux? because in windows the fastboot mode did not work either ;-;
Fastoh said:
Now remove the battery of the phone and in Flash Tool press on "Donwload" and connect the phone without battery and start to flash.
Click to expand...
Click to collapse
But... How remove battery if this not removable?..
Mortyk said:
But... How remove battery if this not removable?..
Click to expand...
Click to collapse
what ._.? the moto e6 plus has a removable battery, I think you have the e6s instead of the e6 plus
Fastoh said:
what ._.? the moto e6 plus has a removable battery, I think you have the e6s instead of the e6 plus
Click to expand...
Click to collapse
Yeap i'm have e6s. I thought e6 plus have not removable battery also.
Do you know how to flash e6s?
Mortyk said:
Yeap i'm have e6s. I thought e6 plus have not removable battery also.
Do you know how to flash e6s?
Click to expand...
Click to collapse
mmmm, look first trying with lmsa to have as it tells you to do the firmware re-installation, then do the same steps you did in the LMSA but in the flashtool
If you want to downgrade you have to do it with the firmware of the e6s because if you do it with the e6 plus your phone will have birck.
Spoiler: UPDATING UPGRADE METHOD
Hello to everyone!
Following this guide, you'll be able to rebrand your T5 to Chinese version (W09-C00 or AL00-C00), so you can upgrade to EMUI 9.1/HARMONY 2.0
(IF YOU HAVE THE HONOR PAD 5 AND YOU WANT TO UPDATE, TALK ME)
I have a T5, W19 / 3gb ram / 32 internal.
It worked for me, should work for you too, but I'm not responsible if something goes wrong (well...maybe a little).
PROCESS:
1- You need to UNLOCK the BOOTLOADER with POTATONV and you MUST CHECK "Disable FBLOCK" or you'll have problems flashing the IMGs.
(fastboot oem lock-state info - to check if FBLOCK is unlocked)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
1.1- Check that FRP is UNLOCKED
1.2- CHECK that HISUITE is installed (for drivers) >>> CLICK HERE TO DOWNLOAD
1.3- BACKUP YOUR OEMINFO USING TWRP, IF SOMETHING GOES WRONG, YOU'LL NEED IT.
Follow this amazing guides to UNLOCK your BOOTLOADER:
SOFTWARE >>> CLICK HERE TO DOWNLOAD
UNLOCK BOOTLOADER T5 process >>> CLICK HERE FOR THE GUIDE
SAVE YOUR BOOTLOADER CODE, YOU'LL NEED IT.
2- Download fastboot and oeminfo, extract it and flash it:
FASTBOOT FILES (USE IT):
WINDOWS: CLICK HERE TO DOWNLOAD
LINUX: CLICK HERE TO DOWNLOAD
MAC: CLICK HERE TO DOWNLOAD
OEMINFO AGS2 / C00:
W09 - W19 WIFI ONLY:
fastboot flash oeminfo oeminfoW09C00.img
https://www.androidfilehost.com/?fid=14655340768118449368
L09 LTE (don't know if it will work on L03):
fastboot flash oeminfo oeminfoags2al00c00.img
https://androidfilehost.com/?fid=14655340768118450716
YOU CAN ALSO USE TWRP TO FLASH OEMINFO, IF YOU DO THAT, FLASH IT AND REBOOT INTO BOOTLOADER TO CONTINUE THE PROCESS
3- Now, download and extract the zip, flash the IMGs inside and wait for the best:
FILES FOR AGS2-W09 & W19
https://www.androidfilehost.com/?fid=14655340768118449355
FILES FOR AGS2-L09
https://www.androidfilehost.com/?fid=14655340768118459545
Flash this files in FASTBOOT
fastboot flash system system.img
fastboot flash vendor vendor.img
fastboot flash fastboot fastboot.img
fastboot flash kernel kernel.img
fastboot flash ramdisk ramdisk.img
fastboot flash recovery_ramdisk recovery_ramdisk.img
fastboot flash cust cust.img
fastboot flash version version.img
***Reboot into STOCK recovery and format data***
*If the above files doesn't work, try flashing the firmware with DLOAD method.
Download the zip and extract the DLOAD folder into the root of your SDCARD, reboot the tablet pressing VOL + and VOL - and wait...*
DOWNLOAD DLOAD W09-C00
DOWNLOAD DLOAD AL00-C00
4- Now, the phone should boot normally, rebranded and with the chinese firmware.
Now, go to settings and check for update, you'll see an update to PIE available.
You'll need to install all the PIE updates before the server sends Harmony, or... you can send the Harmony update directly with this:
https://professorjtj.github.io/ (AGS2-W09 - C00) (AGS2-AL00 - C00)
https://github.com/ProfessorJTJ/HISuite-Proxy/wiki/Complete-Guide (follow instructions, very easy to use)
Upgrading to Pie/Harmony locked my bootloader, but if you saved your code, write it again and unlock it again ^.^
Thanks to @Fosanz for its help.
Thanks to @Rockel for the detailed guide to unlock the bootloader. Go to the post
Thanks to @iceows for the script and steps to edit the oeminfo: Go to the link
Thanks to @oslo83 for helping me to fix the mess that I caused to my tablet.
IF YOU HAVE DOUBTS OR ANY PROBLEM, SEND ME A PM
TELEGRAM: sfoot13
Nc
The shadow proves the sunshine.
t.me
After the rebrand, I didn't lost Widevine L1
That's all folks!
Have a good day, cheers.
Spoiler: REBRAND TO HONOR PAD 5 TABLET AND GET A NICE NAVBAR
After upgrading to PIE/HARMONY, IF YOU WANT TO... FLASH ONLY OEMINFO!!!
W09 - W19 DOWNLOAD LINK
L09 DOWNLOAD LINK
Flash it, reboot, and done, don't do nothing else.
ROOT WITH MAGISK
Download latest magisk apk and patch your recovery ramdisk img, after that, flash with fastboot and reboot into recovery to have root working.
fastboot flash recovery_ramdisk yourimg.img
fastboot reboot-recovery (keep usb cable connected)
Here's my recovery rooted, if you want to flash it
https://www.androidfilehost.com/?fid=14655340768118462757
TWRP: System and Vendor can't be mounted, Huawei changed file system, now is EROFS, so system can't be modify.
Go to the post.
Go to data > hw_init - You'll see many folders, you can delete almost all the apps inside the folders, unless you use one of them. (you'll see the chinese apps)
Script to delete/disable some apps (if you know other apps that can be disable, tell us)
adb shell
sh deletebloatware.sh
Click here to go to the download link
PLAY STORE - MAGISK MODULE
Download the module and go to magisk and install it
Releases · nift4/microg_installer_revived
Install microG GmsCore, GsfProxy, FakeStore (or Play Store if you want so) and MapsV1 to /system/ - nift4/microg_installer_revived
github.com
Download the Playstore apk
Google Play Store 29.9.16-19 [0] [PR] 438372530 (nodpi) (Android 4.4+) APK Download by Google LLC - APKMirror
Google Play Store 29.9.16-19 [0] [PR] 438372530 (nodpi) (Android 4.4+) APK Download by Google LLC - APKMirror Free and safe Android APK downloads
www.apkmirror.com
Download latest playstore apk, use a root explorer, copy the playstore apk, go to SBIN > MAGISK > MODULES > MICROG_INSTALLER > SYSTEM > PRIV-APP > PHONESKY and delete fakestore.apk and paste the latest playstore apk and reboot.
SCREENSHOTS!!!
Hmm, tried to do this but fastboot flash oeminfo oeminfoags2al00c00.img failed. No big deal I did it through TWRP.
Next fastboot flash system system.img but also failed
Sending sparse 'system' 1/6 (412324 KB) OKAY [ 12.720s]
Writing 'system' FAILED (remote: 'Command not allowed')
fastboot: error: Command failed
Bootloader shows PHONE Unlocked and FRP Unlocked both in red.
What am I missing?
@Sleeepy2 Hello, I'm talking with a guy that has the same problem, can't flash oeminfo and system with fastboot.
Same as your tabket, FPR and bootloader unlocked.
I was thinking that maybe in one of the latest huawei updates, they (huawei) changed something (security patches), because I never had that problems and I haven't updated to the latest security patch that huawei released...
You can try sending the firmware with EMUI Flasher https://www.androidfilehost.com/?fid=14655340768118451775
But should download the firmware from this page https://professorjtj.github.io/ look for
AGS2-AL00 - C00AGS2-AL00 8.0.0.215(C00)
@sfoot13 Can't use the EMUI flash yet, as I tried flashing system through TWRP and it failed now can't boot. lol
I've found the firmware on that page but I don't know how to down load it. Clicking the 3 dot menu opens the Downlad ROM window but it doesn't work, says to use the HISuite.Proxy. If I run that and click the link, it shows 3 zips but clicking on any of them doesn't download.
Clicking the Add Rom shows up in HISuite.Proxy but I still don't see a way to download it.
I think I figured out how I am supposed to use the ROM but it doesn't work. Run the Proxy, go to website and click add and it shows up in the proxy. Then open HiSuite connect tablet and click Update. It shows a new version is available however clicking update it instantly goes to Failed to update.
Well if I read the op closer it actually has a link explaining how to use the proxy.
I have flashed the oem file through TWRP, used the proxy to download the 8.0.0.215 rom but wile HiSuite is "installing" Proxy said it's probably not going to work. When the tablet reboots to install it says software update failed
@Sleeepy2 if you flashed the oeminfo, you can flash the system with Emui Flasher, even if you're using linage os or any gsi, because you just need to download the oreo firmware, copy it to internal memory, open emui flasher and select the firmware zip.
To download the firmware directly from the page, you need to click in the box with the three dots ... and you'll see the option to download (always with hisuite proxy open)
ugh, well I think I pooched it now.
I started over and got linage os flashed and rooted. EMUI Flasher couldn't find any files in any folder to flash.
Rebooted back into TWRP and flashed the oeminfo now it only boots into eRecovery or stock recovery, no sign of TWRP.
Booted back into fastboot to try and just flash TWRP again.
fastboot flash recovery_ramdisk TWRP_3.5.2-prague_DarkJoker360_20210508.img
Sending 'recovery_ramdisk' (14894 KB) OKAY [ 0.398s]
Writing 'recovery_ramdisk' FAILED (remote: 'Command not allowed')
fastboot: error: Command failed
eRecovery wont download and install stock anymore. I am going to give up for today.
Ugh, well I guess my tablet is done. Fastboot wont flash recovery and eRecovery
Getting package info failed"
If any one has any suggestions, that would be great.
I just did the oem unlock again from fastboot even though it said it was unlocked. After I did that it automatically rebooted into TWRP and I was able to flash my oeminfo back and it was good to go again.
I've gone through all the the steps successfully, however when I check for updates I don't see any?
What could be wrong?
scabs said:
I've gone through all the the steps successfully, however when I check for updates I don't see any?
What could be wrong?
Click to expand...
Click to collapse
Successfully? Really? Great.
Well, if you installed oeminfo and the IMGs and you formatted data and it booted, go to settings and tell me the version it says.
Not working for me. flashing oeminfo failed using fastboot. Same problem than Sleeepy2
Any clear explanation will be appreciated. I'm not a specialist.
In fact, I'm a little bit a specialist because I've unlocked bootloader and FRP. I've also installed LineOS 18.1
@bedelaitre I'll rewrite it, maybe it will work for everyone.
One thing, you're not able to flash some imgs, because you need to unlock again your bootloader with PotatoNV and CHECK THE BOX "DISABLE FBLOCK", after that you'll be able to flash system and others img, but that means, you'll need to open again the tablet...
sfoot13 said:
Successfully? Really? Great.
Well, if you installed oeminfo and the IMGs and you formatted data and it booted, go to settings and tell me the version it says.
Click to expand...
Click to collapse
scabs said:
Click to expand...
Click to collapse
You need to format data bro.
sfoot13 said:
SCREENSHOTS!!!
Click to expand...
Click to collapse
sfoot13 said:
Hello to everyone!
Following this guide, you'll be able to rebrand your T5 to Chinese version (W09-C00 or AL00-C00), so you can upgrade to EMUI 9.1/HARMONY 2.0
(IF YOU HAVE THE HONOR PAD 5 AND YOU WANT TO UPDATE, TALK ME)
I have a T5, W19 / 3gb ram / 32 internal.
It worked for me, should work for you too, but I'm not responsible if something goes wrong (well...maybe a little).
PROCESS:
1- You need to UNLOCK the BOOTLOADER with POTATONV and you MUST CHECK "Disable FBLOCK" or you'll have problems flashing the IMGs.
(fastboot oem lock-state info - to check if FBLOCK is unlocked)
View attachment 5597429
1.1- Check that FRP is UNLOCKED
1.2- CHECK that HISUITE is installed (for drivers) >>> CLICK HERE TO DOWNLOAD
1.3- BACKUP YOUR OEMINFO USING TWRP, IF SOMETHING GOES WRONG, YOU'LL NEED IT.
Follow this amazing guides to UNLOCK your BOOTLOADER:
SOFTWARE >>> CLICK HERE TO DOWNLOAD
UNLOCK BOOTLOADER T5 process >>> CLICK HERE FOR THE GUIDE
SAVE YOUR BOOTLOADER CODE, YOU'LL NEED IT.
2- Download fastboot and oeminfo, extract it and flash it:
FASTBOOT FILES (USE IT):
WINDOWS: CLICK HERE TO DOWNLOAD
LINUX: CLICK HERE TO DOWNLOAD
MAC: CLICK HERE TO DOWNLOAD
OEMINFO AGS2 / C00:
W09 - W19 WIFI ONLY:
fastboot flash oeminfo oeminfoW09C00.img
https://www.androidfilehost.com/?fid=14655340768118449368
L09 LTE (don't know if it will work on L03):
fastboot flash oeminfo oeminfoags2al00c00.img
https://androidfilehost.com/?fid=14655340768118450716
YOU CAN ALSO USE TWRP TO FLASH OEMINFO, IF YOU DO THAT, FLASH IT AND REBOOT INTO BOOTLOADER TO CONTINUE THE PROCESS
3- Now, download and extract the zip, flash the IMGs inside and wait for the best:
FILES FOR AGS2-W09 & W19
https://www.androidfilehost.com/?fid=14655340768118449355
FILES FOR AGS2-L09
https://www.androidfilehost.com/?fid=14655340768118459545
Flash this files in FASTBOOT
fastboot flash system system.img
fastboot flash vendor vendor.img
fastboot flash fastboot fastboot.img
fastboot flash kernel kernel.img
fastboot flash ramdisk ramdisk.img
fastboot flash recovery_ramdisk recovery_ramdisk.img
fastboot flash cust cust.img
fastboot flash version version.img
***Reboot into STOCK recovery and format data***
*If the above files doesn't work, try flashing the firmware with DLOAD method.
Download the zip and extract the DLOAD folder into the root of your SDCARD, reboot the tablet pressing VOL + and VOL - and wait...*
DOWNLOAD DLOAD W09-C00
DOWNLOAD DLOAD AL00-C00
4- Now, the phone should boot normally, rebranded and with the chinese firmware.
Now, go to settings and check for update, you'll see an update to PIE available.
You'll need to install all the PIE updates before the server sends Harmony, or... you can send the Harmony update directly with this:
https://professorjtj.github.io/ (AGS2-W09 - C00) (AGS2-AL00 - C00)
https://github.com/ProfessorJTJ/HISuite-Proxy/wiki/Complete-Guide (follow instructions, very easy to use)
Upgrading to Pie/Harmony locked my bootloader, but if you saved your code, write it again and unlock it again ^.^
Thanks to @Fosanz for its help.
Thanks to @Rockel for the detailed guide to unlock the bootloader. Go to the post
Thanks to @iceows for the script and steps to edit the oeminfo: Go to the link
Thanks to @oslo83 for helping me to fix the mess that I caused to my tablet.
IF YOU HAVE DOUBTS OR ANY PROBLEM, SEND ME A PM
TELEGRAM: sfoot13
Nc
The shadow proves the sunshine.
t.me
After the rebrand, I didn't lost Widevine L1
That's all folks!
Have a good day, cheers.
Click to expand...
Click to collapse
Good morning !
Sorry for my broken english, i have a huawei mediapad t5 tablet with 3 giga ram exactly like yours.
I would like to know where did you make the contact point on the motherboard so that I can also do it on mine to unlock the bootloader.
I thank you in advance.
@TONYFR-1984
Follow this steps , there's a photo of the motherboard, the exact place that you need to touch (it is marked with a red line and circle)
Trying to unlock the bootloader with PotatoNV on Mediapad T5 not working (video explanation)
Hi there, So After seen many tutorials I wanted to proceed to unlock the bootloader of my Huawei Mediapad T5 , here are the specs ``` Model: AGS2-W09 Build No: AGS2-W09 8.0.0.360(OCEC431) CPU : Hisilicon Kirin...
forum.xda-developers.com
What would be the process of going back to LineageOS?
sfoot13 said:
@bedelaitre I'll rewrite it, maybe it will work for everyone.
One thing, you're not able to flash some imgs, because you need to unlock again your bootloader with PotatoNV and CHECK THE BOX "DISABLE FBLOCK", after that you'll be able to flash system and others img, but that means, you'll need to open again the tablet...
Click to expand...
Click to collapse
Hi, sorry for delay. I don't understand why I need to unlock the bootloader. When booting, the tablet says that the bootloader is unlocked. Are you sure I need to unlock it again ?
Hello everyone! In this guide, I Sidharth will tell you how to flash recovery, root and access bootloader on the Realme 8i and Narzo 50, you probably have seen another guide by Pritish, it's not wrong but it became kind of outdated .
So lets begin,
Requirements:
PC (with windows or linux installed)
Platform tools installed
First unlock the bootloader by following this guide: http://telegra.ph/HOW-TO-UNLOCK-BOOTLOADER-REALME-8INARZO-50-05-08
Or this guide: https://forum.xda-developers.com/t/...-flash-twrp-and-root-rmx3151-rmx3286.4369399/ (dont worry about the boot imgs, just unlock the bootloader normally and boot the phone, don't go on the second step)
So after doing that, you should have platform tools and adb drivers installed, I am not going to tell you how to do that exactly but you should find tons of tutorials on the internet for both linux and windows. (I am going to be using Linux in this case but everything is the same for both windows and linux in this case)
Download this file: https://drive.google.com/file/d/13J2zlrUz84ZDSPERdosgNO6xdhwah4hl/view?usp=sharing
and paste it in your mtkclient folder (you should have that by now if you already unlocked the bootloader.)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Open the terminal and then type: python mtk w lk lk.bin
Now, power off your phone, hold both volume buttons and until it is done
Check if the phone boots into fastboot by holding volume down and power.
If it shows something like this then congrats, you have fastboot access now.
Flashing recovery is very easy now.
Download TWRP image from the TWRP website: https://twrp.me/realme/realme8i.html
Just keep it in the platform tools folder for now.
Boot into your phone, and download the magisk apk from here: https://github.com/topjohnwu/Magisk/releases
After downloading it, download ZArchiver from the Play Store and replace .apk with .zip and save it.
Now power off the phone and boot into fastboot/bootloader.
Open the terminal inside platform tools and:
fastboot flash recovery recovery.img
fastboot reboot recovery
You will be in your custom recovery now .
Now goto install, and select your magisk zip, and flash it normally.
After that is done, reboot to system and rename the magisk zip to apk again and install the apk.
Boom you have also rooted your device .
Thanks to Pritish for bootloader unlock guide and patched lk
also guys please let me know if you have any problems
here is how you can setup mtkclient on linux:
git clone https://github.com/bkerler/mtkclient
cd mtkclient
pip3 install -r requirements.txt
then you should have a mtkclient folder where u can execute the commands
bootloop on logo no way to fix hard to find how i can unbrick
the only thimg im able to do is on adb reflash the recovery and acces the Recovery TWRP but no way to acces the system
suauvia said:
bootloop on logo no way to fix hard to find how i can unbrick
the only thimg im able to do is on adb reflash the recovery and acces the Recovery TWRP but no way to acces the system
Click to expand...
Click to collapse
Just like bootloader unlock method, in MTK Tools, give this command:
#
python mtk e metadata,userdata,md_udc
#
(Without #)
Then connect your phone in BROM mode, then restart. it will be fine
suauvia said:
bootloop on logo no way to fix hard to find how i can unbrick
the only thimg im able to do is on adb reflash the recovery and acces the Recovery TWRP but no way to acces the system
Click to expand...
Click to collapse
be specific, did the lk file cause this or are you tryintg to unbrick through fastboot
if the lk caused this then tell me if you are on realme ui 3.0 or you are a narzo 50 user.
Sidharth09 said:
be specific, did the lk file cause this or are you tryintg to unbrick through fastboot
if the lk caused this then tell me if you are on realme ui 3.0 or you are a narzo 50 user.
Click to expand...
Click to collapse
thanks for your help but after doing so
python mtk e metadata,userdata,md_udc
nothing ha changed stil on realme logo and orange state and 5 seconds message and reloop reboot again
i was on UI 2,0 and updated firmware RMX3151 11.A_46
no idea if Lk make this
i have reflashed the stock recovery and format data also with TWRP recovery format data and cache but always on any move its a reloop reboot on Realme logo
-------
if i relock the bootloader ist possible to recover this phone and then how i can do this
im 67 old and not very used to this kind of operations
heroksiddiqi said:
Just like bootloader unlock method, in MTK Tools, give this command:
#
python mtk e metadata,userdata,md_udc
#
(Without #)
Then connect your phone in BROM mode, then restart. it will be fine
Click to expand...
Click to collapse
python mtk e metadata,userdata,md_udc
doneand nothing has changed
Is there a way to do this on a Mac? I have Realme 8i RMX3151 but do not have access to a Windows computer. Thank you.
I tried the Deep Testing App and it gives the following error "Failed to submit application. This phone model does not support deep testing."
suauvia said:
thanks for your help but after doing so
python mtk e metadata,userdata,md_udc
nothing ha changed stil on realme logo and orange state and 5 seconds message and reloop reboot again
i was on UI 2,0 and updated firmware RMX3151 11.A_46
no idea if Lk make this
i have reflashed the stock recovery and format data also with TWRP recovery format data and cache but always on any move its a reloop reboot on Realme logo
-------
if i relock the bootloader ist possible to recover this phone and then how i can do this
im 67 old and not very used to this kind of operations
Click to expand...
Click to collapse
u can always flash your stock LK again if it somehow made a problem so here
paste it in mtkclient and then
python mtk w lk lk.img
check if it fixes it!
jack1192 said:
Is there a way to do this on a Mac? I have Realme 8i RMX3151 but do not have access to a Windows computer. Thank you.
I tried the Deep Testing App and it gives the following error "Failed to submit application. This phone model does not support deep testing."
Click to expand...
Click to collapse
with mac it is not possible since mtkclient does not work on a mac
Sidharth09 said:
u can always flash your stock LK again if it somehow made a problem so here
paste it in mtkclient and then
python mtk w lk lk.img
check if it fixes it!
Click to expand...
Click to collapse
not working even worst even on fastboot it blocks about nserie decrypt or something like not remember well now i remake the process and get back to locked reboot on logo --- i would ask if i am on TWRP recovery and i want to flash a 7z firmware on .ofp files or a decrypted zip file do you think it will work ??
anyway trying to copy the 6 giigas firmware zip to an SD card the pc say that is too big to copy so maybe thru fastboot i can copt to the phone but i dont know about the command if you know about please let me know about the procedure if is positive way
or ist it any other way to recover the phone ??
finally i would like to install a Lineage customrom
suauvia said:
not working even worst even on fastboot it blocks about nserie decrypt or something like not remember well now i remake the process and get back to locked reboot on logo --- i would ask if i am on TWRP recovery and i want to flash a 7z firmware on .ofp files or a decrypted zip file do you think it will work ??
anyway trying to copy the 6 giigas firmware zip to an SD card the pc say that is too big to copy so maybe thru fastboot i can copt to the phone but i dont know about the command if you know about please let me know about the procedure if is positive way
or ist it any other way to recover the phone ??
finally i would like to install a Lineage customrom
Click to expand...
Click to collapse
finally i follow instructions on this link
[GUIDE][UNBRICK] Realme 8i/Narzo 50 Unbrick Free without Auth [RMX3151][RMX3286]
Hello everyone! So after the new mediatek DAA and SLA protection bypasses you can find github repo of here , using the bypass we are able to use SPFlash Tool, here is a guide how you can do it! This guide is for RMX3151 (Realme 8i) and RMX3286...
forum.xda-developers.com
[GUIDE][UNBRICK] Realme 8i/Narzo 50 Unbrick Free without Auth [RMX3151][RMX3286]all well now
thanks your guide to unlock the bootloader works a charm no success with other ones
Sidharth09 said:
Hello everyone! In this guide, I Sidharth will tell you how to flash recovery, root and access bootloader on the Realme 8i and Narzo 50, you probably have seen another guide by Pritish, it's not wrong but it became kind of outdated .
So lets begin,
Requirements:
PC (with windows or linux installed)
Platform tools installed
First unlock the bootloader by following this guide: http://telegra.ph/HOW-TO-UNLOCK-BOOTLOADER-REALME-8INARZO-50-05-08
Or this guide: https://forum.xda-developers.com/t/...-flash-twrp-and-root-rmx3151-rmx3286.4369399/ (dont worry about the boot imgs, just unlock the bootloader normally and boot the phone, don't go on the second step)
So after doing that, you should have platform tools and adb drivers installed, I am not going to tell you how to do that exactly but you should find tons of tutorials on the internet for both linux and windows. (I am going to be using Linux in this case but everything is the same for both windows and linux in this case)
Download this file: https://drive.google.com/file/d/13J2zlrUz84ZDSPERdosgNO6xdhwah4hl/view?usp=sharing
and paste it in your mtkclient folder (you should have that by now if you already unlocked the bootloader.)View attachment 5682939
Open the terminal and then type: python mtk w lk lk.bin
View attachment 5682941
Now, power off your phone, hold both volume buttons and until it is done
View attachment 5682943
Check if the phone boots into fastboot by holding volume down and power.
If it shows something like this then congrats, you have fastboot access now.View attachment 5682945
Flashing recovery is very easy now.
Download TWRP image from the TWRP website: https://twrp.me/realme/realme8i.html
Just keep it in the platform tools folder for now.
Boot into your phone, and download the magisk apk from here: https://github.com/topjohnwu/Magisk/releases
After downloading it, download ZArchiver from the Play Store and replace .apk with .zip and save it.
Now power off the phone and boot into fastboot/bootloader.
Open the terminal inside platform tools and:
fastboot flash recovery recovery.img
fastboot reboot recovery
You will be in your custom recovery now .
Now goto install, and select your magisk zip, and flash it normally.
After that is done, reboot to system and rename the magisk zip to apk again and install the apk.
Boom you have also rooted your device .
Thanks to Pritish for bootloader unlock guide and patched lk
Click to expand...
Click to collapse
now I cannot turn on my phone after try to access recovery :/
hoangnguyen320 said:
now I cannot turn on my phone after try to access recovery :/
Click to expand...
Click to collapse
i holded power button for 5 minutes...
hoangnguyen320 said:
i holded power button for 5 minutes..
Click to expand...
Click to collapse
volume up and power?
Sidharth09 said:
Hello everyone! In this guide, I Sidharth will tell you how to flash recovery, root and access bootloader on the Realme 8i and Narzo 50, you probably have seen another guide by Pritish, it's not wrong but it became kind of outdated .
So lets begin,
Requirements:
PC (with windows or linux installed)
Platform tools installed
First unlock the bootloader by following this guide: http://telegra.ph/HOW-TO-UNLOCK-BOOTLOADER-REALME-8INARZO-50-05-08
Or this guide: https://forum.xda-developers.com/t/...-flash-twrp-and-root-rmx3151-rmx3286.4369399/ (dont worry about the boot imgs, just unlock the bootloader normally and boot the phone, don't go on the second step)
So after doing that, you should have platform tools and adb drivers installed, I am not going to tell you how to do that exactly but you should find tons of tutorials on the internet for both linux and windows. (I am going to be using Linux in this case but everything is the same for both windows and linux in this case)
Download this file: https://drive.google.com/file/d/13J2zlrUz84ZDSPERdosgNO6xdhwah4hl/view?usp=sharing
and paste it in your mtkclient folder (you should have that by now if you already unlocked the bootloader.)View attachment 5682939
Open the terminal and then type: python mtk w lk lk.bin
View attachment 5682941
Now, power off your phone, hold both volume buttons and until it is done
View attachment 5682943
Check if the phone boots into fastboot by holding volume down and power.
If it shows something like this then congrats, you have fastboot access now.View attachment 5682945
Flashing recovery is very easy now.
Download TWRP image from the TWRP website: https://twrp.me/realme/realme8i.html
Just keep it in the platform tools folder for now.
Boot into your phone, and download the magisk apk from here: https://github.com/topjohnwu/Magisk/releases
After downloading it, download ZArchiver from the Play Store and replace .apk with .zip and save it.
Now power off the phone and boot into fastboot/bootloader.
Open the terminal inside platform tools and:
fastboot flash recovery recovery.img
fastboot reboot recovery
You will be in your custom recovery now .
Now goto install, and select your magisk zip, and flash it normally.
After that is done, reboot to system and rename the magisk zip to apk again and install the apk.
Boom you have also rooted your device .
Thanks to Pritish for bootloader unlock guide and patched lk
Click to expand...
Click to collapse
you can already do this using fastbootd
How to install usbdk in linux? I am using archlinux.
Sidharth09 said:
volume up and power?
Click to expand...
Click to collapse
just power , i tried all vl and pwer
and the battery was 90%
kawsarahmed369 said:
How to install usbdk in linux? I am using archlinux.
Click to expand...
Click to collapse
u dont need those for linux