Database Develop

[Q] [URGENT HELP NEEDED] Asus ZenFone 4 (T100I-A400CG) Update Error

Hello, this is my first post here. My Asus ZenFone 4 is ready for Update to KitKat 4.4, downloaded the Update through System Update but when the installation is in process, it crashed at almost 10%...... i have already tried it 5times but having the same error everytime. Dont know what the error is though....it says System Update failed at Boot-Up. Already done a full system reset but it crashes again during installation. Phone is already rooted. What can i do to update my ZenFone 4 (T100I-A400CG) correctly. Please reply to this message as-soon-as possible. THnx in advance.:angel:

Arjunsmoker said:
Hello, this is my first post here. My Asus ZenFone 4 is ready for Update to KitKat 4.4, downloaded the Update through System Update but when the installation is in process, it crashed at almost 10%...... i have already tried it 5times but having the same error everytime. Dont know what the error is though....it says System Update failed at Boot-Up. Already done a full system reset but it crashes again during installation. Phone is already rooted. What can i do to update my ZenFone 4 (T100I-A400CG) correctly. Please reply to this message as-soon-as possible. THnx in advance.:angel:
Click to expand...
Click to collapse
So your phone is actually functioning, yet you need "urgent help". Hmm. That's an odd interpretation.
Anyway, I don't understand how you are surprised that you're rooted phone isn't updating via OTA as it's common across most OEMs that changing stuff in the system will stop the updates from working correctly. Since you can't be bothered to Google for other ways to upgrade, I took the liberty of spending 15 seconds online and getting this link for you:
http://www.asus-zenfone.com/2014/10/asus-zenfone-4-firmware-wwcht-6530.html

[solved] thnx a lot.
thank u for ur help and btw stop criticizing cause i wrote 'URGENT HELP'....... i wanted to see my phone in KitKat......so i thought the ROOT could hv caused the problem. was very frustrated actually! thnx again!

Repeat update notification

Afternoon all, just wondering if anyone could help on a quick problem - my Nexus 6 keeps prompting me to update but when I do it hangs after the reboot with what I assume is the recovery error message (red exclamation mark). I'm already on build LMY48I on 5.1.1, which I was under the impression was the September 2015 security patch. I'm fully stock, not rooted or any other mods. I am abroad currently, which I wouldn't imagine has any effect?
Could anyone offer any help on this or steer me in the right direction for further information.
Thanks in advance.

Latest build is LMY48M. OTA may fail because of corrupted download.
You may wanna update your signature.

Yeah, OK, thanks, not been around these parts for awhile.
Would you mind letting me know how I would go about getting a fresh download of the update using OTA?
Thank for the reply.

Still booting normally? Bootloader locked?
When you get to error with Android logo with tummy open press Power then VolumeUp this will show more details about the error. Write everything down.

Hi, sorry for for delay in replying. Bootloader is locked, boots normally when not trying to apply this update.
Next time I try to update I'll log the error messages and revert back here, thanks for your help.

gardy09 said:
Hi, sorry for for delay in replying. Bootloader is locked, boots normally when not trying to apply this update.
Next time I try to update I'll log the error messages and revert back here, thanks for your help.
Click to expand...
Click to collapse
If you're overseas you may be getting an incorrect build, not quite sure how that works

Strangely I thought it might have something towards do with being in Spain. I'll factory reset when I get home and see if that works.

Me too
Sorry to bump an old thread but the OP describes the EXACT problem I am having. Repeat system update update notifications. It says its downloaded but it goes to error when apply the update. I first got the notification in Qatar. I am unlocked and rootwd nexus 6 but running stock 5.1.1.
How can I get rid of the incorrect build?

soccerguy243 said:
Sorry to bump an old thread but the OP describes the EXACT problem I am having. Repeat system update update notifications. It says its downloaded but it goes to error when apply the update. I first got the notification in Qatar. I am unlocked and rootwd nexus 6 but running stock 5.1.1.
How can I get rid of the incorrect build?
Click to expand...
Click to collapse
two way.. update to the latest, or long press the update then oresspress the white circle that appears in the right, then press disable notifications. but i thing updating to the is most important.

simms22 said:
two way.. update to the latest, or long press the update then oresspress the white circle that appears in the right, then press disable notifications. but i thing updating to the is most important.
Click to expand...
Click to collapse
When I go to settings, about phone, it shows I àm running 5.1.1 which is the latest version. But ht I still get the notification.

soccerguy243 said:
When I go to settings, about phone, it shows I àm running 5.1.1 which is the latest version. But ht I still get the notification.
Click to expand...
Click to collapse
There have been serveral updates with version number 5.1.1. What you need to check is the build number.
The latest are LMY48M (most people), LYZ28K (T-Mobile) or LVY48F (Project Fi).
---------- Post added at 10:03 ---------- Previous post was at 10:01 ----------
soccerguy243 said:
Sorry to bump an old thread but the OP describes the EXACT problem I am having. Repeat system update update notifications. It says its downloaded but it goes to error when apply the update. I first got the notification in Qatar. I am unlocked and rootwd nexus 6 but running stock 5.1.1.
How can I get rid of the incorrect build?
Click to expand...
Click to collapse
Ah, just re-read your first post. You can't take an OTA-update, since you're rooted. You need to flash a factory image (or relevant parts of one).
Check the stickies for instructions...

Didgeridoohan said:
There have been serveral updates with version number 5.1.1. What you need to check is the build number.
The latest are LMY48M (most people), LYZ28K (T-Mobile) or LVY48F (Project Fi).
---------- Post added at 10:03 ---------- Previous post was at 10:01 ----------
Ah, just re-read your first post. You can't take an OTA-update, since you're rooted. You need to flash a factory image (or relevant parts of one).
Check the stickies for instructions...
Click to expand...
Click to collapse
I have 47Z installed. I'll use nexus root toolkit to get the latest. Thanks SO MUCH!

Evening all and sorry for delayed response. I've called Google today and they were no help whatsoever, the person I spoke to didn't even know the difference between Android versions and build numbers, I had to explain it to her. Is there any way of checking or finding out what build is being pushed to my phone? Also, will I be able to update to 6.0 when it arrives if I haven't sorted this problem ie how to clear this potentially corrupted download? Am I correct in thinking that I need to be on LMY48M and not on LMY48I - thanks in advance.

gardy09 said:
Evening all and sorry for delayed response. I've called Google today and they were no help whatsoever, the person I spoke to didn't even know the difference between Android versions and build numbers, I had to explain it to her. Is there any way of checking or finding out what build is being pushed to my phone? Also, will I be able to update to 6.0 when it arrives if I haven't sorted this problem ie how to clear this potentially corrupted download? Am I correct in thinking that I need to be on LMY48M and not on LMY48I - thanks in advance.
Click to expand...
Click to collapse
Have you ever found out more details about update error? Press Power then Volume Up on error screen.

Will do it now, hang on...

This is the error message I get...

gardy09 said:
This is the error message I get...
Click to expand...
Click to collapse
At this point you have few choices.
File bug report and wait for resolution.
Try Factory Reset. Using PC try fastboot format userdata and format cache.
Unlock bootloader and flash factory image. Might just well go straight to 6.0 MRA58K. You will loose all your private data either way. Backup all your private stuff.

So have downloaded the MRA58K build of 6.0, attempting to sideload via ADB, device seen, reboot bootloader, into recovery, use ./adb sideload 'file.zip' but getting a footer and signature error. Any help would be greatly appreciated.
And how the hell does one update a 5 year old signature on XDA!?
Edit - so just reading around and there are two issues I've noted 1) that I'm going from LMY48I straight to MRA58K and missing out LMY48M or 2) that the factory images can't be sideloaded, they need to use the fastboot scripts. Any ideas what could be causing my errors?

gardy09 said:
So have downloaded the MRA58K build of 6.0, attempting to sideload via ADB, device seen, reboot bootloader, into recovery, use ./adb sideload 'file.zip' but getting a footer and signature error. Any help would be greatly appreciated.
And how the hell does one update a 5 year old signature on XDA!?
Edit - so just reading around and there are two issues I've noted 1) that I'm going from LMY48I straight to MRA58K and missing out LMY48M or 2) that the factory images can't be sideloaded, they need to use the fastboot scripts. Any ideas what could be causing my errors?
Click to expand...
Click to collapse
Here is guide how to flash factory images http://forum.xda-developers.com/nexus-6/general/guide-flash-factory-images-nexus-6shamu-t2954008

gardy09 said:
So have downloaded the MRA58K build of 6.0, attempting to sideload via ADB, device seen, reboot bootloader, into recovery, use ./adb sideload 'file.zip' but getting a footer and signature error. Any help would be greatly appreciated.
And how the hell does one update a 5 year old signature on XDA!?
Edit - so just reading around and there are two issues I've noted 1) that I'm going from LMY48I straight to MRA58K and missing out LMY48M or 2) that the factory images can't be sideloaded, they need to use the fastboot scripts. Any ideas what could be causing my errors?
Click to expand...
Click to collapse
You'll have to find the update from ur current version to the new version. You'll probably have to get LMY48M, didn't see one from I
Sent from my Nexus 6 using Tapatalk

Cannot OTA lineageOS after 04/11/2017 gemini version

Hi,
I've got a update problem my Mi 5 after 04/11 nightly version, each time I try to update, it stuck on TWRP, the log shows errors below:
Updater process ended with ERROR: 7
Error installing zip file '@/cache/recovery/block.map'
Honestly I can't understand which step goes wrong, I've been in reddit /LineageOS, there are some guys encounter the same problem like error 7 but none of them could help me to solve mine.
Does there anyone get the same problem with me? Or anyone can help me deal with this, please?
Thanks a lot!

sihaiyi said:
Hi,
I've got a update problem my Mi 5 after 04/11 nightly version, each time I try to update, it stuck on TWRP, the log shows errors below:
Updater process ended with ERROR: 7
Error installing zip file '@/cache/recovery/block.map'
Honestly I can't understand which step goes wrong, I've been in reddit /LineageOS, there are some guys encounter the same problem like error 7 but none of them could help me to solve mine.
Does there anyone get the same problem with me? Or anyone can help me deal with this, please?
Thanks a lot!
Click to expand...
Click to collapse
You need to install the latest firmware.
Please take a look a the first message of the Lineage thread.
https://forum.xda-developers.com/mi-5/development/rom-cyanogenmod-14-1-xiaomi-mi-5-t3501971

elot01 said:
You need to install the latest firmware.
Please take a look a the first message of the Lineage thread.
https://forum.xda-developers.com/mi-5/development/rom-cyanogenmod-14-1-xiaomi-mi-5-t3501971
Click to expand...
Click to collapse
Thanks a lot, I updated my phone to the last version correctly. Haven't noticed the framework issue early.

[SM-T395] Found TWRP for Tab Active 2 - is it legit?

Hey guys,
I found what claims to be an unofficial TWRP for the Samsung Galaxy Tab Active 2 SM-T395. The source, however, seems rather fishy to me, and the fact that there's no talk at all about it on here more wary. Since the device I'd like to install TWRP on isn't my own, I'm not going to experiment with sources that I don't know. But maybe someone on here´is ready give it a spin, including installation and testing?
AFH link: https://androidfilehost.com/?fid=962339331458990684
Original source: https://www.firmwares.androidinfote...e-2-sm-t395-nougat-7-1-1-unofficial-twrp-tar/
Which was referenced here: https://www.androidinfotech.com/2018/05/root-samsung-galaxy-tab-active-2-sm-t395-nougat.html
The last one is what I found during my Google research for methods of rooting the device.
Here's hoping that this is the real deal.

Going to try later today. Seems legit, but who knows.
Hope this works. I've been trying to build TWRP myself but with no success yet.
Shedaim
EDIT: tried installing using Odin v3.12. Success on installation.
Took off battery after flashing. Entered directly to recovery mode. Got a "installing system update" screen, then a "No command" screen with a broken Android and got back to Android stock recovery.

Aironfaar said:
Hey guys,
I found what claims to be an unofficial TWRP for the Samsung Galaxy Tab Active 2 SM-T395. The source, however, seems rather fishy to me, and the fact that there's no talk at all about it on here more wary. Since the device I'd like to install TWRP on isn't my own, I'm not going to experiment with sources that I don't know. But maybe someone on here´is ready give it a spin, including installation and testing?
AFH link: https://androidfilehost.com/?fid=962339331458990684
Original source: https://www.firmwares.androidinfote...e-2-sm-t395-nougat-7-1-1-unofficial-twrp-tar/
Which was referenced here: https://www.androidinfotech.com/2018/05/root-samsung-galaxy-tab-active-2-sm-t395-nougat.html
The last one is what I found during my Google research for methods of rooting the device.
Here's hoping that this is the real deal.
Click to expand...
Click to collapse
If still relevant you can check my own build here

Shedaim said:
Going to try later today. Seems legit, but who knows.
Hope this works. I've been trying to build TWRP myself but with no success yet.
Shedaim
EDIT: tried installing using Odin v3.12. Success on installation.
Took off battery after flashing. Entered directly to recovery mode. Got a "installing system update" screen, then a "No command" screen with a broken Android and got back to Android stock recovery.
Click to expand...
Click to collapse
Oof, I must have accidentally disabled e-mail notifications or something like that; I didn't see your response until I happened to log in just now.
Thank you for trying that out! A bummer that it didn't work.
Shedaim said:
If still relevant you can check my own build here
Click to expand...
Click to collapse
On the other hand, it's fantastic that you got this to work. It's still very relevant to me. Thanks a bunch!!

[GUIDE] How to install the One UI beta on an AT&T locked s9

Hey guys, just wanted to drop a quick and dirty guide on how to get the beta working on your locked AT&T device. I am by no means a developer or an expert, but I've been flashing ROMs and modding my devices for close to 8 years. I take no responsibility if you brick your device or cannot get it to work, feel free to research yourself or wait until the beta ends and Samsung releases Android 9/One UI next year.
Okay, so the first thing I had to do was install the U1 firmware. I used this thread for most of the steps.
The links to the modded version of Odin in the 2nd post of that thread were dead, so I downloaded it from this post.
I downloaded the 3ARJ2 U1 firmware here.
Following the directions in that U1 thread, I unzipped the firmware file and flashed it in Odin. Elsewhere in the thread, it was recommended to choose the CSC file that starts with "CSC_OMC_OYM..." instead of the "HOME_CSC" file.
After it boots up, you may be able to join the beta using the Samsung+ app, I'd recommend downloading this beta version.
For whatever reason, the beta registration banner showed up for me but pressing the register button never did anything. I found many reports of that problem and tried everything for about two hours to make it work before moving on and downloading the OTA beta file below and installing it through recovery.
I downloaded the OTA file for the U1 firmware from this post.
ARJ2 to ZRK9 (Beta 1)
Download link:
https://mega.nz/#!sjRnHK4S!o2sJ49Stk2GzUFhFXX1Hed8hSOsAVkfaBPVRWY989QM
After installing the beta zip, I performed a factory reset, just in case.
Now I'm happily using the beta on my locked AT&T s9. I did see an option for VoLTE, but I had to disable it due to being on a FirstNet SIM, so I can't speak to how well that feature works. I haven't had much time to play around with the beta yet, because I wanted to get this posted up before I went to work. Hope this helps someone else! Thanks to all who helped me in the various threads, I really appreciate the XDA community!
P.S. This does not trip Knox.

Thank you I'll give it a shot

You're on a FirstNet sim too huh? Me as well. Gonna give this a shot.

I'll be curious how your reception is on the beta. Mine doesn't seem as good as before. I checked the APN settings, and it's still showing that it's using FirstNet profiles.

911jason said:
I'll be curious how your reception is on the beta. Mine doesn't seem as good as before. I checked the APN settings, and it's still showing that it's using FirstNet profiles.
Click to expand...
Click to collapse
Ended up not being able to go from BRJ5 because I can't get the firmware in the correct order. Did doing this trip your Knox? Not a huge deal for me, as I am the IT in my government agency, but a big deal for device compliance in Intune.

I was on 3BRJ5 before flashing the U1 firmware. It did not trip Knox.

So does WiFi calling and VoLTE work? Can anyone confirm

xguntherc said:
So does WiFi calling and VoLTE work? Can anyone confirm
Click to expand...
Click to collapse
Ultimately those features aren't present on the U1 firmwares for Att.

I have a Verizon device and tried installing the One UI beta on my S9+ and got some error messages and wondered if anyone could point me in the right direction
E: folder is wrong
Update package verification took 0.1s (result 1)
E: signature verification failed
E: error 21
Installation aborted. #1

Sproveri said:
I have a Verizon device and tried installing the One UI beta on my S9+ and got some error messages and wondered if anyone could point me in the right direction
E: folder is wrong
Update package verification took 0.1s (result 1)
E: signature verification failed
E: error 21
Installation aborted. #1
Click to expand...
Click to collapse
Sorry, but pretty sure this is S9 only. There is another thread for S9+
That's why it keeps falling

Appreciate the patched Odin. I also have the locked SM-G960U and was unsuccessful in flashing U1.

Sproveri said:
I have a Verizon device and tried installing the One UI beta on my S9+ and got some error messages and wondered if anyone could point me in the right direction
E: folder is wrong
Update package verification took 0.1s (result 1)
E: signature verification failed
E: error 21
Installation aborted. #1
Click to expand...
Click to collapse
The reason its failing is OneUI beta isn't designed for Version G965U. You will need to got to G965U1 to load the beta.

elstano2k7 said:
Appreciate the patched Odin. I also have the locked SM-G960U and was unsuccessful in flashing U1.
Click to expand...
Click to collapse
What part of the process didn't work?

911jason said:
What part of the process didn't work?
Click to expand...
Click to collapse
The 256? error

Finally made the jump as I was too sick of waiting on samsung/att to give me the update! Thanks for the great instructions and links that actually work. Beta 3 to me feels better than using Oreo. The only weird little bug I have noticed is the night mode likes to turn itself off randomly. It's been working great as my daily driver for a almost a week now without issue.

Easy way
Found a easy way
Flash the G960U1 in the post
Completely Boot then
Then flash this via odin
https://drive.google.com/file/d/12zsai6UKCeadt0L1D765vVnksqPTi0pp/view?usp=drivesdk
Full 9.0
Unzip
Follow the flashing step
But add the user data
And boom!!
Works on att US model tested on my own

FizzyAps said:
Found a easy way
Flash the G960U1 in the post
Completely Boot then
Then flash this via odin
https://drive.google.com/file/d/12zsai6UKCeadt0L1D765vVnksqPTi0pp/view?usp=drivesdk
Full 9.0
Unzip
Follow the flashing step
But add the user data
And boom!!
Works on att US model tested on my own
Click to expand...
Click to collapse
Where is the userdata files for the FW