Related
I am a root noob, i rooted my HTC Desire HD a few years ago, but then, it just seemed easier. Now i want to root and install a custom rom on my xperia Z, but it seems all the guides are made for experts? so i google'd and seemed to get hold of a guide, but not sure if its correct or outdated, i obviously dont wanna brick my phone.
So, first question, can someone link me to a valid, easy guide / tutorial, or atleast some reading material on how to root my Z? its the s6603, with Android version 4.4.2.
Secondly when it comes to custom roms, once again, it feels like there is no more guides for dummies like me, i know on my desire, i used to copy the zip over, erase a few things, and then install from zip, and it was flashed, but now i see things like this
Install instructions:
first time
- power off the phone:
- hold vol+ and plug usb to boot into fastboot (blu led)
- fastboot flash boot boot.img (from cm10 zip)
- fastboot reboot
- enter recovery, on boot led will be violet for 3'', during this period press vol+
- flash rom zip
- flash gapps zip
- wipe
- reboot
Click to expand...
Click to collapse
This makes sense, except for the :
- hold vol+ and plug usb to boot into fastboot (blu led)
- fastboot flash boot boot.img (from cm10 zip)
- fastboot reboot
What is fastboot, googling a bit it seems its a program i should install on Windows?
the boot.img, do i copy that out of the cm10.zip file?
To where, the phones SD Card? to Windows?
fastboot reboot, does this mean reboot the phone from fastboot? or is that the command that should be typed in?
Sorry if i come off as dumb, i am not, im just a noob. And i dont want the info spoonfed to me, i like to do my own research before asking stupid questions, but the info on the internet, is just to much, no 2 articles are talking about the same method, programs, etc
Thanks,
To root use towelroot.
To flash firmware use flashtool.
You can find tutorial on flashtool here somewhere.
endlesslyonline said:
I am a root noob, i rooted my HTC Desire HD a few years ago, but then, it just seemed easier. Now i want to root and install a custom rom on my xperia Z, but it seems all the guides are made for experts? so i google'd and seemed to get hold of a guide, but not sure if its correct or outdated, i obviously dont wanna brick my phone.
So, first question, can someone link me to a valid, easy guide / tutorial, or atleast some reading material on how to root my Z? its the s6603, with Android version 4.4.2.
Secondly when it comes to custom roms, once again, it feels like there is no more guides for dummies like me, i know on my desire, i used to copy the zip over, erase a few things, and then install from zip, and it was flashed, but now i see things like this
This makes sense, except for the :
- hold vol+ and plug usb to boot into fastboot (blu led)
- fastboot flash boot boot.img (from cm10 zip)
- fastboot reboot
What is fastboot, googling a bit it seems its a program i should install on Windows?
the boot.img, do i copy that out of the cm10.zip file?
To where, the phones SD Card? to Windows?
fastboot reboot, does this mean reboot the phone from fastboot? or is that the command that should be typed in?
Sorry if i come off as dumb, i am not, im just a noob. And i dont want the info spoonfed to me, i like to do my own research before asking stupid questions, but the info on the internet, is just to much, no 2 articles are talking about the same method, programs, etc
Thanks,
Click to expand...
Click to collapse
Hi
To root your device first download app called TOWELROOT just install it and open it then click the button then go and install SUPER SU APP FROM HERE
and open it. You will get a popup window saying SuperSU binaries need to be updated. Click ok and then NORMAL wait until it's finish and you rooted your phone now
And the FASTBOOT:
fastboot is a boot mode that the device go into it to modifie some system things without need to permission from the device or rooting. BUT the fastboot flash boot boot.IMG is a command that you type in in the command prompt window (CMD) but you need to unlock the device's bootloader to do that or.. You will get COMMAND DID NOT SUCCESS error in CMD
Fastboot reboot command used to get the device out from fastboot mode. Use it instead of unplugging it
and as I told you fastboot not software or app. That zip file you download is drivers to make the PC recognise the device in the fastboot mode and you need to open the command prompt window in the folder you extract the fastboot drivers or it's can be also called ADB or Android debug bridge and the boot.IMG file you need to extract in from the the ROM you trying to flash and put it in the same folder you extracted fastboot drivers
Tapatalk'ed from my Xperia™ Z (C6602) running Dirty Unicorns ROM!
Sorry, but i am still stuck, i installed the tr.apk, that went fine, then i installed SuperSU, it asked me to update, then it asked a message about Normal or TRWM/CWM(?), i choose normal, but it said failed, and i had to reboot phone, i did this, and superSU was installed, so i tried to fastboot, i got into fastboot, it detected the device, but it said
Sending boot (10132 KB) ...
OKAY
writing 'boot'...
FAILED (remote: command not allowed)
finished
i then rebooted with fastboot, and thought maybe that superSU was not fully installed?
so i went into superSU, and saw there was an option to clean and reinstall, i did that, it asked for the same update again normal or TRWM/CWM, and i chose the second option TRWM/CWM, it said it will reboot phone, and so it did.
I then went to play and downloaded an app to see if i have root, when it opened superSU popped up and asked if i wanted to grant access, i accepted.
but the program came back and said i dont have root?
So where is the poblem, with tr.apk? or supeSU.
Thanks for helping the noobie
endlesslyonline said:
Sorry, but i am still stuck, i installed the tr.apk, that went fine, then i installed SuperSU, it asked me to update, then it asked a message about Normal or TRWM/CWM(?), i choose normal, but it said failed, and i had to reboot phone, i did this, and superSU was installed, so i tried to fastboot, i got into fastboot, it detected the device, but it said
Sending boot (10132 KB) ...
OKAY
writing 'boot'...
FAILED (remote: command not allowed)
finished
i then rebooted with fastboot, and thought maybe that superSU was not fully installed?
so i went into superSU, and saw there was an option to clean and reinstall, i did that, it asked for the same update again normal or TRWM/CWM, and i chose the second option TRWM/CWM, it said it will reboot phone, and so it did.
I then went to play and downloaded an app to see if i have root, when it opened superSU popped up and asked if i wanted to grant access, i accepted.
but the program came back and said i dont have root?
So where is the poblem, with tr.apk? or supeSU.
Thanks for helping the noobie
Click to expand...
Click to collapse
After installing towelroot you have to open it and click on the button. This will root your device. After that you can continue with supersu
endlesslyonline said:
Sorry, but i am still stuck, i installed the tr.apk, that went fine, then i installed SuperSU, it asked me to update, then it asked a message about Normal or TRWM/CWM(?), i choose normal, but it said failed, and i had to reboot phone, i did this, and superSU was installed, so i tried to fastboot, i got into fastboot, it detected the device, but it said
Sending boot (10132 KB) ...
OKAY
writing 'boot'...
FAILED (remote: command not allowed)
finished
i then rebooted with fastboot, and thought maybe that superSU was not fully installed?
so i went into superSU, and saw there was an option to clean and reinstall, i did that, it asked for the same update again normal or TRWM/CWM, and i chose the second option TRWM/CWM, it said it will reboot phone, and so it did.
I then went to play and downloaded an app to see if i have root, when it opened superSU popped up and asked if i wanted to grant access, i accepted.
but the program came back and said i dont have root?
So where is the poblem, with tr.apk? or supeSU.
Thanks for helping the noobie
Click to expand...
Click to collapse
To check whether you are rooted or not download root checker app from play store and install.
The app will show your root status.
Thats what I did?
After installing tr.apk, I clicked on the make it ra1n button. And root checker says im not rooted.
Will I mess up if I try the process again?
Should I maybe dona factory reset first? Before trying again
Thanks
endlesslyonline said:
Thats what I did?
After installing tr.apk, I clicked on the make it ra1n button. And root checker says im not rooted.
Will I mess up if I try the process again?
Should I maybe dona factory reset first? Before trying again
Thanks
Click to expand...
Click to collapse
Do you have recovery installed?
Excuse my ignorance, but what is recovery?
But i think it would be safe to say, if I dont know what it is , I dont have it installed
endlesslyonline said:
Excuse my ignorance, but what is recovery?
But i think it would be safe to say, if I dont know what it is , I dont have it installed
Click to expand...
Click to collapse
Do you have teamviewer installed on your PC?
androidtweaker1 said:
Do you have teamviewer installed on your PC?
Click to expand...
Click to collapse
I dont, but i am busy downloading it now
I checked again, I took the chance and re-ran tr.apk, and clicked on "make it ra1n" again, i then went RootChecker, and it confirms i have root access.
So, off to superSU again, and it asks again to "The SU binary needs to be updated. Continue?"
I then say yes, and I am confronted with the "If you have a custom recovery like TWRP or CWM, that can be used to (try to) install the SU binary ..."
I obviously dont have a custom recovery installed, and if i understand correctly, the boot.img in the cm10.zip folder, would be the recovery right? If so, i wold then choose normal, because i dont have custom recovery.
If the boot.img is not the custom recovery, what is then? how do i get it?
i tried to fastboot flash boot.img, once again now, after making it rain, but before running superSU, but still gave the error, that it could not write.
What am i doing wrong? am i missing steps here?
endlesslyonline said:
I dont, but i am busy downloading it now
I checked again, I took the chance and re-ran tr.apk, and clicked on "make it ra1n" again, i then went RootChecker, and it confirms i have root access.
So, off to superSU again, and it asks again to "The SU binary needs to be updated. Continue?"
I then say yes, and I am confronted with the "If you have a custom recovery like TWRP or CWM, that can be used to (try to) install the SU binary ..."
I obviously dont have a custom recovery installed, and if i understand correctly, the boot.img in the cm10.zip folder, would be the recovery right? If so, i wold then choose normal, because i dont have custom recovery.
If the boot.img is not the custom recovery, what is then? how do i get it?
i tried to fastboot flash boot.img, once again now, after making it rain, but before running superSU, but still gave the error, that it could not write.
What am i doing wrong? am i missing steps here?
Click to expand...
Click to collapse
That's because you have to unlock your bootloader first. Please use the search function and read about the risks etc of unlocking your bootloader.
St.Jimmy90 said:
That's because you have to unlock your bootloader first. Please use the search function and read about the risks etc of unlocking your bootloader.
Click to expand...
Click to collapse
Ugh, ok. Will do some research, this is not towards you, or any one in this thread, coz u are doing an awesome job helpimg me, and pointing me in the right direction. But why oh why was bootloader unlocking never even mentioned in the tutorials...
So what are my steps,
Download and run tr.apk
Then install and run supersu
Then unlock bootloader
Fastboot load boot.img
Then flash custom rom,
Or is the order wrong?
endlesslyonline said:
Ugh, ok. Will do some research, this is not towards you, or any one in this thread, coz u are doing an awesome job helpimg me, and pointing me in the right direction. But why oh why was bootloader unlocking never even mentioned in the tutorials...
So what are my steps,
Download and run tr.apk
Then install and run supersu
Then unlock bootloader
Fastboot load boot.img
Then flash custom rom,
Or is the order wrong?
Click to expand...
Click to collapse
You can flash stock based roms without unlocking the bootloader. Aosp based roms need an unlocked bootloader. If a rom needs an unlocked bootloader it is mentioned in the description like this [ub].
To unlock your bootloader root is NOT required.
Is there no all on one guide for the xperia z that includes, root, unlocking, flashing, etc. Im a tad scared to use part of this tutorial, part of that , etc
Second version towelroot (no need to restart) me also caused problems with the update of binaries, so suggest you First version.
Wysłane z mojego C6603 przy użyciu Tapatalka
OK, SUCCESS !!
Thanks to all that pointed me in the right direction. I ended up doing the following.
Downloading the SDK,
Went to sony's developer site, got the boot unlock code for my IMEI, fastboot, blah blah
flash'ed CM10 boot.img
and then installed CM10 from zip.
I am playing with the phone as i type this, so it worked
Now, one more noobie question, and i will leave you guys alone (for awhile)
If i decide to install CM11, do i just copy the zip over to the SDCard, wipe wipe install? or do i need to fastboot boot flash with the CM11 boot.img?
Same goes for any other rom, just wipe wipe flash, or fastboot everytime?
Thanks again
endlesslyonline said:
OK, SUCCESS !!
Thanks to all that pointed me in the right direction. I ended up doing the following.
Downloading the SDK,
Went to sony's developer site, got the boot unlock code for my IMEI, fastboot, blah blah
flash'ed CM10 boot.img
and then installed CM10 from zip.
I am playing with the phone as i type this, so it worked
Now, one more noobie question, and i will leave you guys alone (for awhile)
If i decide to install CM11, do i just copy the zip over to the SDCard, wipe wipe install? or do i need to fastboot boot flash with the CM11 boot.img?
Same goes for any other rom, just wipe wipe flash, or fastboot everytime?
Thanks again
Click to expand...
Click to collapse
At least that's the safe way. I hope you made a backup of your ta partition before unlocking the bootloader, otherwise your warranty is now void
St.Jimmy90 said:
At least that's the safe way. I hope you made a backup of your ta partition before unlocking the bootloader, otherwise your warranty is now void
Click to expand...
Click to collapse
Phone is out of warranty in any case, but yea, I did make a backup, or atleast I think I did. In clockworkmod, I went to backup and restore, and selected backup to sd card
endlesslyonline said:
Phone is out of warranty in any case, but yea, I did make a backup, or atleast I think I did. In clockworkmod, I went to backup and restore, and selected backup to sd card
Click to expand...
Click to collapse
He meant by partition back is backup your TA (trim area) PARTITION OR DRM KEYS TO RELOCK YOUR BOOTLOADER ANYTIME
Tapatalk'ed from my Xperia™ Z (C6602) running Dirty Unicorns ROM!
Hi,
I managed to unlock the Bootloader on my Moto G 2nd dual sim. Now I'm looking for a step to step how to to root my phone.
There are so many (confusing) how to's out there
I'm using Marshmallow.
Took me a while to find instructions for non Windows user to unlock bootloader ...so a step by step Linux how to would be appreciated.
thanks in advance,
Best, Martin
da.cappo said:
Hi,
I managed to unlock the Bootloader on my Moto G 2nd dual sim. Now I'm looking for a step to step how to to root my phone.
There are so many (confusing) how to's out there
I'm using Marshmallow.
Took me a while to find instructions for non Windows user to unlock bootloader ...so a step by step Linux how to would be appreciated.
thanks in advance,
Best, Martin
Click to expand...
Click to collapse
As long as you have your adb and fastboot tools installed on your computer, as well as the drivers you need for the moto g2, the steps are the same for both windows and Linux. To root:
1. Flash twrp version 3.0.0.0
Download the file, place in your fastboot folder, and then open a command window in that folder. Type : fastboot flash recovery twrp.img
2. Using TWRP, install SuperSU v2.62 only.
3. (Optional)Boot your rom up and update SuperSU to version 2.65 using the play store.
That's all you need to get root access.
Viren said:
As long as you have your adb and fastboot tools installed on your computer, as well as the drivers you need for the moto g2, the steps are the same for both windows and Linux. To root:
1. Flash twrp version 3.0.0.0
Download the file, place in your fastboot folder, and then open a command window in that folder. Type : fastboot flash recovery twrp.img
2. Using TWRP, install SuperSU v2.62 only.
3. (Optional)Boot your rom up and update SuperSU to version 2.65 using the play store.
That's all you need to get root access.
Click to expand...
Click to collapse
that doesnt work, you ned a modified boot.img or it gets stuck in a bootloop. why attempt to answer a question you clearly dont know the answer to?
dcroz said:
that doesnt work, you ned a modified boot.img or it gets stuck in a bootloop. why attempt to answer a question you clearly dont know the answer to?
Click to expand...
Click to collapse
1. You do not need a modified boot image, SuperSU will modify the boot image for you.
2. I answered your question because I've done the above hundreds of times before.
3. I do realise that I'm replying many months later than when you posted, but XDA only informed me of your reply just now.
This is a short guide on rooting for thous who are new to this stuff
Steps:
1: download adb platform tools from here
2: Unlock bootloader. follow the guide on htcdev.
make sure you have htc drivers installed so that you can use oem command in fastboot mode for unlocking
3: Download TWRP
4: Download SuperSU and copy it to your phone's internal memory
5: Enable USB debugging and type "adb reboot-bootloader" from pc
6: Type: "fastboot boot twrp-3.1.1-0-alpine.img"
make sure you have twrp image in same folder as adb.
7: Wait for sometime you will boot into twrp recovery from there select install and select the SuperSU zip file
8: reboot and check for root
Links:
http://www.supersu.com/download
https://developer.android.com/studio/releases/platform-tools.html
has anybody tried this? I'm a bit scared to be the first one
javnostra said:
has anybody tried this? I'm a bit scared to be the first one
Click to expand...
Click to collapse
You should make sure you get a pristine backup at hand, or a RUU appropriate to your device. Otherwise you'll never be able toreturn to a full stock system.
On the U11 it is possible to boot TWRP from fastboot, without flashing it and thus without touching stock recovery. That way I've been able to flash Magisk what's coming with MagiskSU and the possibility to use some Modules. And all without altering the system or replacing stock recovery in the first place.
Sent from my HTC U11 using XDA Labs
javnostra said:
has anybody tried this? I'm a bit scared to be the first one
Click to expand...
Click to collapse
Yes its working without flaws, i have tested it myself. also your not installing recovery this time your booting directly
dranzer006 said:
Yes its working without flaws, i have tested it myself. also your not installing recovery this time your booting directly
Click to expand...
Click to collapse
Thanks, I will try it then.
javnostra said:
Thanks, I will try it then.
Click to expand...
Click to collapse
It works. Thanks a lot. My phone is rooted
5m4r7ph0n36uru said:
You should make sure you get a pristine backup at hand, or a RUU appropriate to your device. Otherwise you'll never be able toreturn to a full stock system.
Click to expand...
Click to collapse
for anyone asking themselves how to backup
https://forum.xda-developers.com/showpost.php?p=53767160&postcount=2
or https://forum.xda-developers.com/showpost.php?p=53770286&postcount=4
or is there a different way these days? @5m4r7ph0n36uru
BerndM14 said:
Connect phone to PC, boot into bootloader mode and type fastboot boot name_of_recovery.img that'll just boot the custom recovery as opposed to flashing it, that way you can make a nandroid backup of all partitions including stock recovery.
Click to expand...
Click to collapse
an0ther said:
The guys method of using recovery to backup recovery will only work on Philz… Not twrp as it does not always backup stock recovery properly. The proper way to backup stock recovery is..
1. Root your phone, which can be done by towel root or by just booting a recovery like he said,
fastboot boot twrporwhatever.img, then flash supersu
2. Boot phone that has stock recovery
3. adb shell
4. su "watch your phone to grant root adb access if you haven't ever done it"
5. dd if=/dev/block/mmcblk0p43 of=/sdcard/recovery.img
6. This will put flashable recovery.img on your internal sd card. Copy this and save it for later
7. "fastboot flash recovery recovery.img" will get you back to stock recovery, "fastboot flash recovery twrporwhatever.img" to flash custom recovery.
Click to expand...
Click to collapse
If possible and a TWRP recovery is available one should boot to bootloader and try if the command fastboot boot name_of_twrp.img works. Make sure to NOT grant r/w at first boot and leave it ro. Now you can perform a backup of stock recovery, boot and system image (not system partition!) to obtain a pristine backup.
All else will alter system partitions md5 and the backup won't be pristine any longer. Due to block based OTA policy introduced by Google you won't be able to OTA without a pristine system image.
Sent from my HTC U11 using XDA Labs
Bro My Boot Loader is Locked.
Htc dev Not Relised Htc u play Boot loader.
I think these are the instructions. You need to register to access the link
https://www.htcdev.com/bootloader/unlock-instructions
or use my login:
lizba
ALJSDBf234LJABSf
edit: dont use my login. you have to register. you'll get a mail with another page plus a .bin file
https://www.htcdev.com/bootloader/unlock-instructions/page-4/
I have two questions.
1. If I fastboot to TWPR will it stay (flash for good) or after disconnecting my phone it will be gone ?
2. Can I flash Magisk instead of SuperSU ?
Code:
fastboot oem get_identifier_token
FAILED (remote: unknown command)
how i can solve it?
ex71 said:
Code:
fastboot oem get_identifier_token
FAILED (remote: unknown command)
how i can solve it?
Click to expand...
Click to collapse
need enable "OEM unlock" in developers menu, reboot into bootloader and select "download mode". Next steps from original guide.
ex71 said:
need enable "OEM unlock" in developers menu, reboot into bootloader and select "download mode". Next steps from original guide.
Click to expand...
Click to collapse
But in download mode there is no fastboot active ?! Until you installed the correct drivers
no "fastboot" (like a "one s", etc) on this phone. no fastboot usb
"fastboot" command work in "bootloader menu" and "download mode"
fastboot oem only in download mode
Hello. Please explain what I am doing wrong. I will download what is in points. I download this adb something, but it does not work. Nothing starts. Does not communicate with the phone. OCB. Could anyone write this guide so that he could understand and act?
Installing magisk_patched is unnecessary.
download ADB here
download TWRP here
download magisk here
first ,we must unlock bootloader.
Settings->About phone->tap at Build number 7 times.Now,we unlocked the "Developer options". open it and turn the OEM unlocking on.
Reboot to bootloader&Run this command on your computer with ADB:
fastboot oem unlock
Use Volume key to select&Power key to enter.
(Ensure you have fully backed up all your files first because the device will be wiped back to default factory state but with an unlocked bootloader)
reboot to bootloder&connect us phone to computer.
Run this command on your computer with ADB:
fastboot boot twrp-3.3.1-2-guacamole.img
then,the phone will reboot to TWRP,but this not end for install, it will be broke after you reboot again, we must install the twrp-installer-3.3.1-2-guacamole.zip In this TWRP.
after this step we got the TWRP installed.
then use TWRP to install the last release magisk.
now we got magisk installed & SafetyNet-pass.
you can install xposed or not .
thanks all&enjoy.
This guide completely misses unlocking the bootloader, changing the option in developer settings to OEM unlock is NOT unlocking the bootloader. Please amend your guide to show the missing steps:
Running the following in the bootloader is how to correctly unlock the bootloader :
fastboot devices
Make sure your device is reported correctly
fastboot oem unlock
(Ensure you have fully backed up all your files first because the device will be wiped back to default factory state but with an unlocked bootloader)
djsubterrain said:
This guide completely misses unlocking the bootloader, changing the option in developer settings to OEM unlock is NOT unlocking the bootloader. Please amend your guide to show the missing steps:
Running the following in the bootloader is how to correctly unlock the bootloader :
fastboot devices
Make sure your device is reported correctly
fastboot oem unlock
(Ensure you have fully backed up all your files first because the device will be wiped back to default factory state but with an unlocked bootloader)
Click to expand...
Click to collapse
reedit now，thx
May want to fix Ture to True and after flashing the TWRP-installer reboot back to TWRP to make sure it sticks(Recovery Installed) before you flash Magisk zip.
Don't forget to flash to both slots to get everything to stick.
Its pretty hard to fail safetynet. I've flashed many different things on this phone and never failed it.
JeSUS! FINALLY! After trying out that other method of rooting, installing twrp and magisk (by using patched images) THIS worked. I updated to 9.5.6 (back to stock, but still bootloader unlocked) and then followed this guide to rooting this phone. Finally! Whew! Wish I had done this from the start. I'm able to go get some sleep now! Thanks OP!
So many great minds here! Best community for a specified device that ive ever had the pleasure of being a part of. Can't wait to try this when my unlock token comes in ?
roaduardo said:
JeSUS! FINALLY! After trying out that other method of rooting, installing twrp and magisk (by using patched images) THIS worked. I updated to 9.5.6 (back to stock, but still bootloader unlocked) and then followed this guide to rooting this phone. Finally! Whew! Wish I had done this from the start. I'm able to go get some sleep now! Thanks OP!
Click to expand...
Click to collapse
This is the classic way to get root,happy to help you
Purest said:
Don't forget to flash to both slots to get everything to stick.
Click to expand...
Click to collapse
I am waiting for the gsi of resurrection remix, curing twrp now is unnecessary
just making sure:
adb devices
adb reboot bootloader
fastboot devices
fastboot oem unlock (have it checked in dev options first)
reboot into bootloader after phone setup
fastboot boot twrp ................img
install twrp..............zip
install magisk
reboot?
equlizer said:
just making sure:
adb devices
adb reboot bootloader
fastboot devices
fastboot oem unlock (have it checked in dev options first)
reboot into bootloader after phone setup
fastboot boot twrp ................zip
install twrp..............zip
install magisk
reboot?
Click to expand...
Click to collapse
Did u try it ? Im waiting on confirmation as well
This is the method that I have been doing all along and it works everytime without any issues.
equlizer said:
just making sure:
adb devices
adb reboot bootloader
fastboot devices
fastboot oem unlock (have it checked in dev options first)
reboot into bootloader after phone setup
fastboot boot twrp ................zip
install twrp..............zip
install magisk
reboot?
Click to expand...
Click to collapse
Should be fastboot boot TWRP.img then install either twrp.zip if there's an installer or twrp.img if not
JTruj1ll0923 said:
Should be fastboot boot TWRP.img then install either twrp.zip if there's an installer or twrp.img if not
Click to expand...
Click to collapse
fixed my post so this method i dont have to worry about slots a and b right? Then what about when an update comes. Do i flash the full update or can i do an OTA? If i flash a full .zip will i loose my data? I'm coming from a pixel 2 xl.
Can someone please clarify. If I do this on slot A, how do I change over to Slot B to do it?
BlueMemory said:
Installing magisk_patched is unnecessary.
download ADB here
download TWRP here
download magisk here
first ,we must unlock bootloader.
Settings->About phone->tap at Build number 7 times.Now,we unlocked the "Developer options". open it and turn the OEM unlocking on.
Reboot to bootloader&Run this command on your computer with ADB:
fastboot oem unlock
Use Volume key to select&Power key to enter.
(Ensure you have fully backed up all your files first because the device will be wiped back to default factory state but with an unlocked bootloader)
reboot to bootloder&connect us phone to computer.
Run this command on your computer with ADB:
fastboot boot twrp-3.3.1-2-guacamole.img
then,the phone will reboot to TWRP,but this not end for install, it will be broke after you reboot again, we must install the twrp-installer-3.3.1-2-guacamole.zip In this TWRP.
after this step we got the TWRP installed.
then use TWRP to install the last release magisk.
now we got magisk installed & SafetyNet-pass.
you can install xposed or not .
thanks all&enjoy.
Click to expand...
Click to collapse
Flashing twrp Breaks wifi.
ashokmor007 said:
Flashing twrp Breaks wifi.
Click to expand...
Click to collapse
Does it really? I just ordered a 7 Pro yesterday so I don't have mine yet.
Hi everyone its not working for me i wonder why i am on gm1915
H4X0R46 said:
Does it really? I just ordered a 7 Pro yesterday so I don't have mine yet.
Click to expand...
Click to collapse
No it doesn't. I flashed the twrp installer zip with magisk and my wifi is working just fine.
---------- Post added at 09:24 PM ---------- Previous post was at 09:21 PM ----------
schmeggy929 said:
May want to fix Ture to True and after flashing the TWRP-installer reboot back to TWRP to make sure it sticks(Recovery Installed) before you flash Magisk zip.
Click to expand...
Click to collapse
schmeggy what up. I see you're still rockin the Bad BoyZ siggy
I've tried multiple rooting programs to try to root the phone, but none of them seem to work. So my question is, has anyone figured out a working method to get root? (I've unlocked the boot loader already)
TheRedPandaSSN said:
I've tried multiple rooting programs to try to root the phone, but none of them seem to work. So my question is, has anyone figured out a working method to get root? (I've unlocked the boot loader already)
Click to expand...
Click to collapse
I haven't been able to root it either. How'd u unlock the bootloader ?
greeneyez15o said:
I haven't been able to root it either. How'd u unlock the bootloader ?
Click to expand...
Click to collapse
If you go into developer options it allows you to unlock the bootloader.
TheRedPandaSSN said:
If you go into developer options it allows you to unlock the bootloader.
Click to expand...
Click to collapse
I don't think that completely unlocks the bootloader
TheRedPandaSSN said:
If you go into developer options it allows you to unlock the bootloader.
Click to expand...
Click to collapse
All that does is ALLOW the bootloader to be unlocked - it doesn't unlock it.
I just unlocked the bootloader
Used adb
"Fastboot flashing unlock"
Next im gonna try to apply root
Wish me luck
I have just ordered this phone. Will hopefully be able to share backup copies of ramdisk(boot) to be used with magisk to give root
Well if anyone is Interested in trying out mtk-su to get system-less, boot-less root it should work. It worked with my umidigi phone that also has mtk p70 soc. And running pie.
https://forum.xda-developers.com/android/development/amazing-temp-root-mediatek-armv8-t3922213
Here is device back up script project I had done based on that mtk-su.
https://github.com/mrmazakblu/Root-Backup-Helper
My test of using mtk-su did not work out.
But i do have backup copy of the stock boot.img , install magisk manager (currently i used V 7.3.4, after magisk update, V20 caused device trouble. Recommend stay with mahisk v19.3) and patch the boot.img from link below, then flash with "fastboot flash boot /file.name" to have full root.
here is stock boot file
https://androidfilehost.com/?fid=1899786940962604580
:::UPDATE::10-27
Successfully flashed magisk with twrp. But because the current twrp has no working touchscreen. It was done with ADB commands.
mrmazak said:
My test of using mtk-su did not work out.
But i do have backup copy of the stock boot.img , install magisk manager (use most recent version, currently i used V 7.3.4) and patch the boot.img from link below, then flash with "fastboot flash boot /file.name" to have full root.
here is stock boot file
https://androidfilehost.com/?fid=1899786940962604580
Click to expand...
Click to collapse
How'd u patch the boot.img ?
Thanks !!!
greeneyez15o said:
How'd u patch the boot.img ?
Thanks !!!
Click to expand...
Click to collapse
You can follow full guide found on magisk thread.
Here is general steps.
1. Install magisk manager app
2. Select install. Choose option to patch local file.
3. When complete, copy that patched_boot.img to PC
4. Fastboot flash boot patched_boot.img
I did not share the patched boot.img. you need to do this step on your own. Is better that way.
mrmazak said:
You can follow full guide found on magisk thread.
Here is general steps.
1. Install magisk manager app
2. Select install. Choose option to patch local file.
3. When complete, copy that patched_boot.img to PC
4. Fastboot flash boot patched_boot.img
I did not share the patched boot.img. you need to do this step on your own. Is better that way.
Click to expand...
Click to collapse
Sorry for the question, but wheres the option to patch local file?
---------- Post added at 01:25 PM ---------- Previous post was at 01:01 PM ----------
greeneyez15o said:
Sorry for the question, but wheres the option to patch local file?
Click to expand...
Click to collapse
I followed instructions, I keep getting error cannnot load 'patched_boot.img'
greeneyez15o said:
Sorry for the question, but wheres the option to patch local file?
---------- Post added at 01:25 PM ---------- Previous post was at 01:01 PM ----------
I followed instructions, I keep getting error cannnot load 'patched_boot.img'
Click to expand...
Click to collapse
I feel maybe I was too general in the steps. (not enough detail) sorry.
If you got to the part when it is loading patched_boot
then you got past the patching part.
so, you need to find the patched_boot.img . It should be in the download folder on device
copy this to your PC.
reboot phone to bootloader mode.
then open terminal in same window as the copied patched_boot.img file, or use the full path name in the command.
In the following example, the patched_boot.img file is saved in c:\adb
Code:
adb pull /sdcard/Download/patched_boot.img c:\adb\
adb reboot bootloader
fastboot flash boot c:\adb\patched_boot.img
fastboot reboot
mrmazak said:
I feel maybe I was too general in the steps. (not enough detail) sorry.
If you got to the part when it is loading patched_boot
then you got past the patching part.
so, you need to find the patched_boot.img . It should be in the download folder on device
copy this to your PC.
reboot phone to bootloader mode.
then open terminal in same window as the copied patched_boot.img file, or use the full path name in the command.
In the following example, the patched_boot.img file is saved in c:\adb
Click to expand...
Click to collapse
Got it !!! Had to reboot my computer ?
mrmazak said:
You can follow full guide found on magisk thread.
Here is general steps.
1. Install magisk manager app
2. Select install. Choose option to patch local file.
3. When complete, copy that patched_boot.img to PC
4. Fastboot flash boot patched_boot.img
I did not share the patched boot.img. you need to do this step on your own. Is better that way.
Click to expand...
Click to collapse
Does anyone manage to change the system file? when you try the phone freezes helps reboot
fafanakatr said:
Does anyone manage to change the system file? when you try the phone freezes helps reboot
Click to expand...
Click to collapse
Do you mean, flashing gsi image, or editing things on stock system. I have been focussed on tarp, and my tried either case.
I can do that soon and confirm if system is freeze.
OK, first time i tried to flash GSI here it is failed.
used fastboot flash system **gsi.img**
(phh v119)
it flashed without error, but will not go past bootloader splash screen. --ODD
will try again later
mrmazak said:
Do you mean, flashing gsi image, or editing things on stock system. I have been focussed on tarp, and my tried either case.
I can do that soon and confirm if system is freeze.
OK, first time i tried to flash GSI here it is failed.
used fastboot flash system **gsi.img**
(phh v119)
it flashed without error, but will not go past bootloader splash screen. --ODD
will try again later
Click to expand...
Click to collapse
I did everything according to the instructions that you suggested, and everything worked out for me, I got a root, but when I try to change the system files, the phone freezes, maybe the root is not full? Thanks for your work)
fafanakatr said:
I did everything according to the instructions that you suggested, and everything worked out for me, I got a root, but when I try to change the system files, the phone freezes, maybe the root is not full? Thanks for your work)
Click to expand...
Click to collapse
Well all depends on what system files you have changed.
I was able to delete the system private-app file "blu-ignite" (an unauthorized app installed program) without freezing system.
I was on magisk 19.3. when I try to update to magisk v20 then I have issues. Freezes, wifi not turn on, ect. So try to restore stock, and Will have to use custom update Chanel with magisk to force it to use the older version.
I am also trying to see if twrp can be used tethered, to install magisk. By using "adb shell twrp sideload" command. And sideloading the magisk file.
If, when I see it works I can write the the whole process.
mrmazak said:
Well all depends on what system files you have changed.
I was able to delete the system private-app file "blu-ignite" (an unauthorized app installed program) without freezing system.
I was on magisk 19.3. when I try to update to magisk v20 then I have issues. Freezes, wifi not turn on, ect. So try to restore stock, and Will have to use custom update Chanel with magisk to force it to use the older version.
I am also trying to see if twrp can be used tethered, to install magisk. By using "adb shell twrp sideload" command. And sideloading the magisk file.
If, when I see it works I can write the the whole process.
Click to expand...
Click to collapse
I will try to do as you suggested and let you know) I will be well waiting for your success
mrmazak said:
Well all depends on what system files you have changed.
I was able to delete the system private-app file "blu-ignite" (an unauthorized app installed program) without freezing system.
I was on magisk 19.3. when I try to update to magisk v20 then I have issues. Freezes, wifi not turn on, ect. So try to restore stock, and Will have to use custom update Chanel with magisk to force it to use the older version.
I am also trying to see if twrp can be used tethered, to install magisk. By using "adb shell twrp sideload" command. And sideloading the magisk file.
If, when I see it works I can write the the whole process.
Click to expand...
Click to collapse
thank you very much I did everything according to the instructions and everything worked out for me,I tried to turn on the camera2api but so far without success,
can you understand this?