Ok so I'm posting this because we started to get off topic in the other thread, not because I think you will find it useful lol.
Basically the steps I will outline will trigger your Google Dialer to try and activate VVM. If you are on Sprint like me, all it will do is add the voicemail tab. I've seen posts from others that say the app does import all of their current Voicemails but no new ones after that. Maybe that is carrier specific or maybe if you are signed up for VVM through your carrier it works, I don't personally know.
Anyway, here we go.
What you'll need:
1- A rooted device - I'm guessing this will work on all devices not just our V30s but I haven't tested elsewhere. Feel free to provide feedback if you see this and try it on other phones, and then maybe this post can move to general Android instead of V30.
2- Google dialer installed - mine has been converted to a system app, and I'm part of the beta, so I can update through play store. I am also running magisk modules that may be allowing all of this to happen, such as xml pack, Google framework, and some others. Shout out to their respective devs, thank you.
3 - The app Shortcut Master which is available as a paid app on play store.
4 - some patience because this literally only works sometimes for unknown reasons. Maybe we can narrow down the failure rate with some trial and error but for now I can't tell you why it works sometimes and other times nada. The upside is, there seems to be no I'll effects from trying and failing.
Tldr.
You need root, Google dialer (maybe as as a system app) and the app Shortcut Master to get this done.
You should probably Force close the Google dialer app before you start so the settings take hold. Not sure if you have to, but shouldn't hurt to do it.
Step one:
Open shortcut master. Click search and enter the word "voicemail"
Step two:
You'll see lots of results. Ignore them all and scroll down to ones under the Phone App. Find VoicemailSecretCode and click launch. (I guess you could also just search that instead of just Voicemail)
Step 3:
You'll see a white screen with two options.
Sync
VVM config override < click this one.
Step 4:
Press the top option titled "load current"
You'll see it change some of the fields. This is just pulling in the current config and since you don't have much going on, very little should change.
Step5
Click the Override toggle.
Input your phone number (see pics)
Press back once when done.
Step 6
You should back to the white page with the two options again. This time press sync.
That's it. I'm not sure what makes this work since sometimes it doesn't. If you're hasn't updated with the voicemail section, try power cycling and relaunching dialer. If that doesn't work, clear the cache. If it still doesn't work you can try clearing all data, Force closing,and then following the steps again.
Now you should have the voicemails tab. It will try and activate for a while by sending you a provisioning text. It is going to send this text alot at first so be warned as I don't know if it's a free text (do people still have limited texts??)
You will now have a bit more options in your settings menu under Voicemail, however since it never provisions (or at least mine doesn't) the added options are not accessible.
Enjoy your extra tab of nothingness lol.
Feel free to throw around some thanks
*edit: The 9 attached screenshots are basically all of the steps in order except for the last two which need to be swapped. If you read them left to right you would follow 1-7, then pic 9, then pic 8 would be the last one.
Reserved for updates
Oops. And one pic was missing, second to last step. Will update into first post later... See below.
Edit: This pic was originally left off of my first post and I was unable to add it in from mobile app. Pic has been added to the first post now.
JonnyTrulove said:
Oops. And one pic was missing, second to last step. Will update into first post later... See below.
Click to expand...
Click to collapse
Well I got this far with my Google app on T-Mobile.
Awesome tutorial thank you!
Sent from my LG-H932 using XDA Labs
BROKEN1981 said:
Well I got this far with my Google app on T-Mobile.
Awesome tutorial thank you!
Click to expand...
Click to collapse
Bug on the XDA app? Not showing my screenshot
Sent from my LG-H932 using XDA Labs
This is how I have it.
Sent from my LG-H932 using XDA Labs
JonnyTrulove said:
Oops. And one pic was missing, second to last step. Will update into first post later... See below.
Click to expand...
Click to collapse
I noticed in your screenshot you never blacked out the 40.
Is that part of your phone number? Or did it load that and you entered your number with it?
Sent from my LG-H932 using XDA Labs
I will just say I've only gotten it fully working on the US998 roms (I haven't tried the steps here yet). So it's very possible some carrier branded roms have stuff that mess with apps accessing voicemails, at least ones that use the carrier's database, not 3rd party ones with their own servers like youmail or Google voice. Maybe because some carriers charge for any kind of visual voicemail. Verizon does for the premium transcribing version. Just my 2 cents. I'll see if following this stuff helps me get it working on the vs996 rom I'm on now and report back if I do.
BROKEN1981 said:
I noticed in your screenshot you never blacked out the 40.
Is that part of your phone number? Or did it load that and you entered your number with it?
Click to expand...
Click to collapse
Phone number.
Curious, Where did you get your port info?
Also, noted that your preloaded part of the VVM ends with CVVM while mine is Omtp. Possibly because tmo supports vvm and Sprint is carrier blocked to their own severs???
Have you received some activation texts since reconfiguring? And have any Voicemails loaded?
TotallyAnxious said:
I will just say I've only gotten it fully working on the US998 roms (I haven't tried the steps here yet). So it's very possible some carrier branded roms have stuff that mess with apps accessing voicemails, at least ones that use the carrier's database, not 3rd party ones with their own servers like youmail or Google voice. Maybe because some carriers charge for any kind of visual voicemail. Verizon does for the premium transcribing version. Just my 2 cents. I'll see if following this stuff helps me get it working on the vs996 rom I'm on now and report back if I do.
Click to expand...
Click to collapse
Since you mentioned Google Voice, I figured it would be a good chance to start the conversation about GV, Sprint, a possible VVM workaround, and a theory I have....
I am sure that someone out there has to know the proper info/settings/specs that would allow us to bypass carrier VM and instead pull from Google Voices VVM service. Or at least I think we can all figure it out through some trial and error.
Right now I have all of my missed calls sent to GV. This allows me to ignore Sprints annoying VM service and paid VVM. All calls bypass sprints VM and instead the message gets transcribed by GVs VVM service. There must be a way to find out what GV ports and packages need to be set and in place in order to tell the dialer to read from there. I've already tried inputting my GV number instead of my Sprint # but all that does is change where the activation texts are sent.
From what I can tell, the Google dialer does not have some VVM server of it's own that it can call on. Nothing in the manifests or code that I could find. It basically only has the ability to piggy back off of a carriers server and relay it into the app as a duplicate (think pop3 / imap).
I believe this is the case because I've seen people post that their dialer absorbed all of their current VVMs but wouldn't find new ones. This probably means that the app is pointed to the place that Vvm are stored either on the device on their carriers server, but they won't get new ones because the app is not authenticated pull data.
So if we can find someone whose Google Dialer pulled in their current batch of VVM and see what their settings look like, we can see what it's pointed at in order to read that data one time and transfer it in. If we can figure out the corresponding file in the GV app, then we ate half way there!
If we can then take that info, and combine it with some knowledge of GV/Google/ and their usual servers ports etc. I think we can create a work around that would allow everyone to get free VVM by setting up a dummy (or real like in my case) Google voice number to use its transcription service instead of the carrier.
Side note for anyone who wants to hear my little conspiracy theory....
Sprint until very recently let you integrate a Google voice account. It's slightly different than just having the Google voice app. Not going to go through all the differences, but basically it was possible to have you GV # carrier integrated until recently.
I think the reason Sprint no longer does this is because Google's VVM rollout. I.e. if GV was still integrated, a quick change of the settings above and it would have properly activated Google's VVM service to work instead of the Sprint version.
JonnyTrulove said:
Phone number.
Curious, Where did you get your port info?
Also, noted that your preloaded part of the VVM ends with CVVM while mine is Omtp. Possibly because tmo supports vvm and Sprint is carrier blocked to their own severs???
Have you received some activation texts since reconfiguring? And have any Voicemails loaded?
Click to expand...
Click to collapse
I just followed the directions you gave. When I selected load, that's what popped up.
I haven't had any text.
Sent from my LG-H932 using XDA Labs
JonnyTrulove said:
.
Click to expand...
Click to collapse
I know with a custom ROM on T-Mobile, the visual voicemail in the Google phone app works with no issues.
Also found this. Any ideas?
Sent from my LG-H932 using XDA Labs
BROKEN1981 said:
I just followed the directions you gave. When I selected load, that's what popped up.
I haven't had any text.
Sent from my LG-H932 using XDA Labs
Click to expand...
Click to collapse
Interesting. Just so we can start to trial and error our way to a better world, would you mind sharing a couple details? I may ask everyone to answer a few of these and see if we can start to work our way through this and get to some working versions.
Your Carrier:
Current Carrier VVM status: (i.e do you already have a vvm app o your phone that works, do you pay for it, is it the stock carrier app, etc.)
Since you did the GDialer Configuration Update(the steps in post 1)...
Is your Google Dialer VVM working now?
Have you received provisioning texts? No (you already answered this one)
If you already had a VVM service, did you have transcribed messages in your carrier VVM app?
If yes, did they transfer into your Google Dialer VVM tab?
BROKEN1981 said:
I know with a custom ROM on T-Mobile, the visual voicemail in the Google phone app works with no issues.
Also found this. Any ideas?
Sent from my LG-H932 using XDA Labs
Click to expand...
Click to collapse
Good find! I would venture a guess and say that you found something useful there.
Since it looks like that grayed out image is pointing to your TMO VVM box, I would suggest using the two ports listed there and trying them in the Google Dialer Configuration. Meaning the 443 and 8082 #s. I am not sure which is which, but if you try them both maybe it will point the dialer at the stored VVM data.
JonnyTrulove said:
Good find! I would venture a guess and say that you found something useful there.
Since it looks like that grayed out image is pointing to your TMO VVM box, I would suggest using the two ports listed there and trying them in the Google Dialer Configuration. Meaning the 443 and 8082 #s. I am not sure which is which, but if you try them both maybe it will point the dialer at the stored VVM data.
Click to expand...
Click to collapse
I tried everything I I could think of.
Nothing is working.
Sent from my LG-H932 using XDA Labs
BROKEN1981 said:
I tried everything I I could think of.
Nothing is working.
Click to expand...
Click to collapse
Damn, it would have been cool if we figured it out that fast.
Hopefully some more people will post their configurations and we can make some progress. Thanks for trying.
Can't find Shortcut Maker in the market or at least the one that looks like in the screen shots.
lowridincrew said:
Can't find Shortcut Maker in the market or at least the one that looks like in the screen shots.
Click to expand...
Click to collapse
https://www.apkmirror.com/apk/vndnguyen/shortcut-master-lite/
Sent from my LG-H932 using XDA Labs
Attempting to follow this guide, attached is what I receive when trying to launch the voicemailsecretcode. Any suggestions?
dustintinsley said:
Attempting to follow this guide, attached is what I receive when trying to launch the voicemailsecretcode. Any suggestions?
Click to expand...
Click to collapse
Going to need a knowledgeable dev to check this.
Sent from my LG-H932 using XDA Labs
Related
I had a little app that would change the carrier code sent to the App Market, so that it would think you coming from AT&T, T-Mobile, or a bunch of other carriers.
I flashed my flash, and now I can remember what the app was called! I do remember its icon was a little green lock unlocked on the left side. Can someone help a brother out and point me in the right direction?
Thanks!
Market Access
The app is called my market.
Sent from my SAMSUNG-SGH-I897 using XDA App
Thanks for the suggestions, but neither of these is what I had downloaded. The app I was using was black-themed, had three tabs, and let you apply different 6 digit carrier codes. It didn't access the Market itself. You still used the Market App, but the third option at the top was no longer AT&T... it was "downloads". It would also allow you to backup values, etc.
Anyone?
dc41 said:
Thanks for the suggestions, but neither of these is what I had downloaded. The app I was using was black-themed, had three tabs, and let you apply different 6 digit carrier codes. It didn't access the Market itself. You still used the Market App, but the third option at the top was no longer AT&T... it was "downloads". It would also allow you to backup values, etc.
Anyone?
Click to expand...
Click to collapse
Market Enabler (another Program) and Market Access BOTH do this, however, Market Access allows for you to spoof on Boot, so that you essentially only need to spoof once.
http://amip.tools-for.net/wiki/android/marketaccess
Please from now on, use the search tool on the forums. I found the answer in 2seconds by searching "Market Restrictions"
-Dave
warri said:
Market Enabler (another Program) and Market Access BOTH do this, however, Market Access allows for you to spoof on Boot, so that you essentially only need to spoof once.
http://amip.tools-for.net/wiki/android/marketaccess
Please from now on, use the search tool on the forums. I found the answer in 2seconds by searching "Market Restrictions"
-Dave
Click to expand...
Click to collapse
Thanks Dave, but I was using the search function (and google) quite heavily with no luck. The key word I was missing was "Restrictions". I was using things like carrier codes spoofing, market carrier, etc and spending a lot of time looking in the different Markets themselves.
Thanks for the link, but I'm not sure the scolding was necessary.
dc41 said:
Thanks Dave, but I was using the search function (and google) quite heavily with no luck. The key word I was missing was "Restrictions". I was using things like carrier codes spoofing, market carrier, etc and spending a lot of time looking in the different Markets themselves.
Thanks for the link, but I'm not sure the scolding was necessary.
Click to expand...
Click to collapse
Did not mean for it to be harsh, just adding in as a suggestion, i guess re-reading it, it came off a little hard. My apologies. Thats defiantly the app you want to use for this though
warri said:
Did not mean for it to be harsh, just adding in as a suggestion, i guess re-reading it, it came off a little hard. My apologies. Thats defiantly the app you want to use for this though
Click to expand...
Click to collapse
No problem! You could call me a mutha***** a**hole, etc. and I'd still do the "We're not worthy" bow as long as you pointed me to the right app!
dc41 said:
No problem! You could call me a mutha***** a**hole, etc. and I'd still do the "We're not worthy" bow as long as you pointed me to the right app!
Click to expand...
Click to collapse
well your not worthy to my almighty skills ..........just playing...no problem, hope that app works out for you
You've probably found it, but I think you are looking for Market Enabler.
It's icon is a green "ME" in front of paper bag. It has 3 tabs: "Actual", "Settings list", and "Set custom"
Thanks for the suggestion for Market Access warri, it'll be nice having it happen automatically.
dc41 said:
I had a little app that would change the carrier code sent to the App Market, so that it would think you coming from AT&T, T-Mobile, or a bunch of other carriers.
I flashed my flash, and now I can remember what the app was called! I do remember its icon was a little green lock unlocked on the left side. Can someone help a brother out and point me in the right direction?
Thanks!
Click to expand...
Click to collapse
May I enquire what app is it that you are trying to get by appearing to be on another carrier. I installed my market and it did allow me to do this, but looking around and pretending to be on another carrier did not reveal any great sounding apps at all. Most of what I saw was bloatware, or apps to check your account information, and look for things like the WiFi hotspots for that carrier. What is it that you are wanting to get, that is unavailable to us AT&T folks?
rajendra82 said:
May I enquire what app is it that you are trying to get by appearing to be on another carrier. I installed my market and it did allow me to do this, but looking around and pretending to be on another carrier did not reveal any great sounding apps at all. Most of what I saw was bloatware, or apps to check your account information, and look for things like the WiFi hotspots for that carrier. What is it that you are wanting to get, that is unavailable to us AT&T folks?
Click to expand...
Click to collapse
anything related to tethering is blocked
Ok, I know that this is kind of weird "problem" to post about here, but my One doesn't have any of the Sprint bloat/apps. I suspect it might be because my Network Operator Name in the About portion of Settings is "HTC" instead of "Sprint". I'm running viperboy's stock odexed 1.29.651.10. My wife, who also has a Sprint One, is running 100% stock and has all of the Sprint crap and her Network Operator is Sprint. So is this because I'm running a rooted "stock" ROM? Or is there something else going on? In any event, I kind of wanted to check out the Scout navigation app and it apparently isn't on my phone and certainly doesn't show up in the Play Store when I search for it or under the Sprint category. How can I get my phone to believe that it is a Sprint phone? I'll worry about freezing or ripping out bloatware I don't want later, I just want the choice!
Where did you get the phone? It doesn't sound like it's a retail device.
ak074 said:
Where did you get the phone? It doesn't sound like it's a retail device.
Click to expand...
Click to collapse
I got it at Sam's Club from the retail phone guy. I should add that everything else seems to work fine: Play Store access including paid apps, make and receive phone calls, 3g and LTE, wifi, GPS, etc.
GreyRogue said:
Ok, I know that this is kind of weird "problem" to post about here, but my One doesn't have any of the Sprint bloat/apps. I suspect it might be because my Network Operator Name in the About portion of Settings is "HTC" instead of "Sprint". I'm running viperboy's stock odexed 1.29.651.10. My wife, who also has a Sprint One, is running 100% stock and has all of the Sprint crap and her Network Operator is Sprint. So is this because I'm running a rooted "stock" ROM? Or is there something else going on? In any event, I kind of wanted to check out the Scout navigation app and it apparently isn't on my phone and certainly doesn't show up in the Play Store when I search for it or under the Sprint category. How can I get my phone to believe that it is a Sprint phone? I'll worry about freezing or ripping out bloatware I don't want later, I just want the choice!
Click to expand...
Click to collapse
A lot of the "stock" rooted roms still remove bloatware apps. Check the rom's thread on here and see if they were removed. Sometimes the bloat apps are still there, but moved to a different folder. That way, you can add what you want.
There was a thread on this a while back. I believe the general assumption is you got an HTC demo unit. Its htc branded as opposed to sprint branded. No issues save for missing sprint apps. If you take it back, theyll exchange it for the simple fact its branded htc. Just ruu first. No need to exchange, though.
Sent from my HTCONE using xda app-developers app
youkosnake said:
There was a thread on this a while back. I believe the general assumption is you got an HTC demo unit. Its htc branded as opposed to sprint branded. No issues save for missing sprint apps. If you take it back, theyll exchange it for the simple fact its branded htc. Just ruu first. No need to exchange, though.
Sent from my HTCONE using xda app-developers app
Click to expand...
Click to collapse
I kind of wondered about that. I don't think it's really worth taking it back just for some carrier apps I'll probably end up pulling out anyway. I wonder why there seem to be so many demo units out there being sold as retail? Maybe the initial supply problems?
I dont know man. Maybe they got shipped out in retail boxes beforehand and some sprint stores never put them out on display and got them mixed up? Thats a mofo of a coincidence if so though
Sent from my HTCONE using xda app-developers app
Further research
I've poked around a little more in my system files to see if there is any reference to Sprint and found a few apks in /system/app: SprintDMS.apk, Sprint_Worldwide.apk, SprintInstaller.apk, and SprintZone.apk. If I try to install them using ES File Explorer, the installer runs and warns me that they are system apps and tells me about permissions, then fails with the message "App not installed." (Well duh, that's why I tapped on the apk....) So at least some of the Sprint stuff is on my phone, but it is dormant somehow. Is it possible that I just didn't get activated quite right after rooting? I sort of remember something called Hands-Free Activation running for several minutes on the first boot after rooting and cancelling it because it did not seem like it was going to complete. Maybe that has something to do with it?
You (or someone) changed something in your dialer settings. There is an option to turn off sprint branding in there. When you were on stock did you have any sprint animations when the phone booted?
You just have to change one setting to fix it if the problem is what I think it is.
easy fix...
1. install nova launcher
2. with nova launcher now set as launcher hold on homescreen to create new shortcut.
3. select new short cut > activities.
4. scroll down the list until you see "Update Device"... click update device then look for a "Branding" submenu.
5. Click on "Branding" and you will make a "Branding" shortcut on your Homescreen.
6. Click new "Branding" shortcut and set Branding to "Sprint"
Thank Autoprime for posting this fix. All your sprint apps will come back too. If that doesn't fix it PM me.
Sent from my LG-LS970 using xda premium
kc_exactly said:
When you were on stock did you have any sprint animations when the phone booted?
Click to expand...
Click to collapse
I don't remember for sure (I booted maybe 2 times before I got around to rooting), but I don't think so.
kc_exactly said:
4. scroll down the list until you see "Update Device"... click update device then look for a "Branding" submenu.
Click to expand...
Click to collapse
"Update Device" isn't in that list, and I didn't see Branding or anything like it in some other submenus I tried.
Just found this thread (not sure how I missed it when I was searching and reading thread titles before posting my thread). It is full of people with varying degrees of the same "problem" I have, but for some of them significant things are missing, like mobile network settings and so on. The fix is basically flashing the RUU and letting it download its Sprint package a few minutes after connecting to the network after that, then rebooting. I'm backing up all my apps now to give that a try.
GreyRogue said:
Just found this thread (not sure how I missed it when I was searching and reading thread titles before posting my thread). It is full of people with varying degrees of the same "problem" I have, but for some of them significant things are missing, like mobile network settings and so on. The fix is basically flashing the RUU and letting it download its Sprint package a few minutes after connecting to the network after that, then rebooting. I'm backing up all my apps now to give that a try.
Click to expand...
Click to collapse
I suggest HTCs built in backup. It backs up apps, settings, evrrything minus autorotate settings and lockscreen password
Sent from my HTCONE using xda app-developers app
GreyRogue said:
Just found this thread (not sure how I missed it when I was searching and reading thread titles before posting my thread). It is full of people with varying degrees of the same "problem" I have, but for some of them significant things are missing, like mobile network settings and so on. The fix is basically flashing the RUU and letting it download its Sprint package a few minutes after connecting to the network after that, then rebooting. I'm backing up all my apps now to give that a try.
Click to expand...
Click to collapse
PM me your serial number
Alright, I flashed the RUU, updated the profile and PRL and ... got the Sprint icons on the second home screen to show up! But mostly they are just links to the Play Store and the items are not available for my carrier as my carrier is still HTC. Does anyone know of a way to force my phone to get reprovisioned entirely? Maybe that would help....
And now confirmed not a demo unit, just a regular old Sprint One. So it must be something with how it got activated, right?
Anyone activated DIGITS and tried out the app on S8 yet?
If so, what are your impressions and annoyance?
I signed up for the beta back when it started, just put it on my Verizon iPhone 7 (work) and it works flawlessly.
On the S8 there is no additional app needed, it's all integrated into the stock ROM. The dialer and SMS apps let you choose which line you want to call or text from. It also tells you what device made a call. Works flawlessly.
se1000 said:
On the S8 there is no additional app needed, it's all integrated into the stock ROM. The dialer and SMS apps let you choose which line you want to call or text from. It also tells you what device made a call. Works flawlessly.
Click to expand...
Click to collapse
Yep, i was on unbranded firmware which was missing the Multilines settings, so flashed back to official TMO firmware and now everything is seamless without a hitch. Enjoying DIGITS although I don't have plan to carry 2 numbers.
Where are you guys finding the multilines setting? I have an S8+.
bibbin said:
Where are you guys finding the multilines setting? I have an S8+.
Click to expand...
Click to collapse
Same question here, can anyone elaborate about it?
Thanks
How is this different from Google Voice? And is it any better?
Sent from my SM-G950U using Tapatalk
If Digits is enabled for the line, you'll find multiline settings under Cloud and Accounts.
bibbin said:
Where are you guys finding the multilines setting? I have an S8+.
Click to expand...
Click to collapse
Cloud and Accounts. You can enable it in there and then your Dialer & Texts will display their respective icons & number. S8+ as well
Sent from my SM-G955U using Tapatalk
Thanks for those instructions. Unfortunately, I don't have that as an option. Perhaps I should call it a day (waiting and hoping for a root solution) and update this puppy.
Torridred04 said:
Cloud and Accounts. You can enable it in there and then your Dialer & Texts will display their respective icons & number. S8+ as well
Sent from my SM-G955U using Tapatalk
Click to expand...
Click to collapse
I don't see that option either, and I'm using a T-Mobile Galaxy S8
trace1er said:
I don't see that option either, and I'm using a T-Mobile Galaxy S8
Click to expand...
Click to collapse
My apologies. I should have included the fact that there is a known issue with the location of those settings on the S8/S8+. Another manager in my district activated Digits, rebooted his S8+ and the Multi Line settings disappeared. I along with him & others have reported it to the Digits team and apparently there is an OTA update coming to address it. In the mean time they've suggested using the Digits app for those having issues.
I'm on the AQC9 with all updates blocked and it's working flawlessly so I'm not sure where the issue resides
Sent from my SM-G955U using Tapatalk
I have the s8 and the gear s3 and digits works fine without a problem didn't have to set up anything on the phone. I have 2 lines one for me and one for the wife.
I just wish I could put my S3 line into digits.
Ok I work for T-Mobile and I know how to make the digits multi line setting appear. It's a process though so get ready.
First you have to log in to the T-Mobile app. So if yoiu don't have it or deleted it download it again from Play Store. Log in and hit the menu button > usage and plans. You should see a button that says to unlock digits. Click it.
A message will then appear telling you multi line has been added. But you need to restart your phone for it to show up. It will be in clouds and account in settings.
I can't upload any screenshots as mines is activated already and the button goes away. But after thatnjust sign in to your t-mobile account.
Now FYI!!!!
You need to have someone registered as the PRIMARY ACCOUNT HOLDER ON MY.T-MOBILE.COM BECAUSE WHEN YOU ACTIVATE YOUR DIGITS NUMBER AND PUT IT IN. IT SENDS A REQYEST TO THE PRIMARY ACCOUNT HOLDER TO ALLOW THE NUMBER TO BE USED ON THAT DEVICE! IF NOT YOU WILL GET STUVK WITH A "WAITING FOR APPROVAL " MESSAGE FOREVER AND HAVE TO LOG OUT AND STSRT THIS WHOLE PROCESS OVER. ADDED A PAH AFTER WON'T SEND AN APPROVAL TEXT.
Sent from my SM-G950U using Tapatalk
bradbutter said:
Ok I work for T-Mobile and I know how to make the digits multi line setting appear. It's a process though so get ready.
First you have to log in to the T-Mobile app. So if yoiu don't have it or deleted it download it again from Play Store. Log in and hit the menu button > usage and plans. You should see a button that says to unlock digits. Click it.
A message will then appear telling you multi line has been added. But you need to restart your phone for it to show up. It will be in clouds and account in settings.
I can't upload any screenshots as mines is activated already and the button goes away. But after thatnjust sign in to your t-mobile account.
Now FYI!!!!
You need to have someone registered as the PRIMARY ACCOUNT HOLDER ON MY.T-MOBILE.COM BECAUSE WHEN YOU ACTIVATE YOUR DIGITS NUMBER AND PUT IT IN. IT SENDS A REQYEST TO THE PRIMARY ACCOUNT HOLDER TO ALLOW THE NUMBER TO BE USED ON THAT DEVICE! IF NOT YOU WILL GET STUVK WITH A "WAITING FOR APPROVAL " MESSAGE FOREVER AND HAVE TO LOG OUT AND STSRT THIS WHOLE PROCESS OVER. ADDED A PAH AFTER WON'T SEND AN APPROVAL TEXT.
Sent from my SM-G950U using Tapatalk
Click to expand...
Click to collapse
Any idea if they're going to raise the data speed from 512kbps for duplicate sims?
Is it possible to enable the multi line settings for a Verizon S8 running the T-Mobile firmware? My is TMB/TMB/VZW, hoping there's a way to force enable it...
FiendFyre said:
Is it possible to enable the multi line settings for a Verizon S8 running the T-Mobile firmware? My is TMB/TMB/VZW, hoping there's a way to force enable it...
Click to expand...
Click to collapse
I know, two months late here, but I'm wondering if you ever got that figured out. I've done the same with an AT&T phone (TMB/TMB/ATT) and can't get the multi-line to enable. Using Shortcut Master I can get the Multi-line config to launch, but trying to sign-in to my account just gets me a screen that says "Updating Multi-line settings... Please try again later."
louisd said:
I know, two months late here, but I'm wondering if you ever got that figured out. I've done the same with an AT&T phone (TMB/TMB/ATT) and can't get the multi-line to enable. Using Shortcut Master I can get the Multi-line config to launch, but trying to sign-in to my account just gets me a screen that says "Updating Multi-line settings... Please try again later."
Click to expand...
Click to collapse
Hey, yeah I did manage to get it to work. Had the same issue, using Nova I could get to the multiline settings but no options actually worked. I ended up swapping my sim into an actual T-Mobile phone that has digits integration (S7 edge), then unlocking it on their website for Digits to work, and then swapped it back, and I got the little popup saying that multiline was enabled. Seems like the sim has to be provisioned.
I like the Digits Apps for Windows and MacOS. Its like having iMessage. The only issue I've had is that text sent from the PC don't show up on my phone. Still nice though I can send and receive text on the PC. I can also make and take phone calls.
Since I still rely on Verizon's Visual Voicemail, I was a little annoyed when I noticed that the VVM icon was missing. After downloading a Verizon VVM version apk and attempting install, it states that another program exists with the same signature. I looked for the App under Apps and cannot find it. This is while looking at all apps as well.... not just enabled apps. I'm assuming the com.samsung.vvm exists in the apps directory that I cannot see without root.
Does anyone know a way around this without root? I check my voicemail way too much the old way with *86 since I have no way of knowing if I have a voicemail. Sometimes calls just don't come through where I'm at.
Bump
nitro66215 said:
Since I still rely on Verizon's Visual Voicemail, I was a little annoyed when I noticed that the VVM icon was missing. After downloading a Verizon VVM version apk and attempting install, it states that another program exists with the same signature. I looked for the App under Apps and cannot find it. This is while looking at all apps as well.... not just enabled apps. I'm assuming the com.samsung.vvm exists in the apps directory that I cannot see without root.
Does anyone know a way around this without root? I check my voicemail way too much the old way with *86 since I have no way of knowing if I have a voicemail. Sometimes calls just don't come through where I'm at.
Click to expand...
Click to collapse
So you don't have this shortcut on your dialer?
hazmad said:
So you don't have this shortcut on your dialer?
Click to expand...
Click to collapse
Negative. There is a "Chat" icon that brings up text messaging.
hazmad said:
So you don't have this shortcut on your dialer?
Click to expand...
Click to collapse
under settings for the dialer ... service provider shows.... "My carrier".... Voice Mail Number = *86
Any chance of getting a Verizon Visual Voicemail apk that will work on an unlocked phone?
I asked a Verizon salesperson if there were any drawbacks to buying an unlocked S8. None, she said. Maybe she honestly didn't know, but not having Visual Voicemail is making me think I've wasted $700.
I tried the YouMail workaround and found my voicemails delayed by up to 12 hours, so that's not going to cut it. I already use Google Voice for my work line, so that's not a great option either.
Hoping someone can help me salvage something from my mistake so that I can get the most from this otherwise awesome phone.
Someone should ask jkruse he find ways on the S7 edge without root.
I think he's still researching
Sent from my SM-G950U using Tapatalk
I don't know why Verison's VVM is so much better than other options. I use Google Voice and get visual print outs of VM. I may just be ignorant of the benefits of Verizon's app, but there must be others out there that are just as good.
I just need some app that tells me I have a voicemail from Verizon. I do not want to forward my phone to some other system for voicemail.
I have an APK for the VVM application. That is the point of this post. It will not allow me to install it because it says that an app with the same signature is already installed. Since I do not have Root, I cannot browse the root apps and remove the old one or fix it's issues since it doesn't show in the apps list for all apps.
Can you post a link to the APK? I'm in the same situation.
bkoning007 said:
Can you post a link to the APK? I'm in the same situation.
Click to expand...
Click to collapse
This was from a titanium backup on my other phone. Just won't load because of the signature issue on my phone. And I don't have root to fix that.
Maybe someone can do the proper decompile and modify the signature for the APK... then Maybe non-rooted users can install?
anyone out there please give me something. i have the unlocked s8+ on verizon and no voicemail. if someone leaves a voicemail, i will not get an icon i would have to call my voicemail to see. i would be fine not having VVM but i dont even get an icon. WTF??? I cant get the google VVM to work some how....tried how everyone else is doing it voicemails are not sent to my phone.....sooo stupid....
Same Phone - Same Problem
Today I had a Verizon tech. set me up on the old Verizon voicemail system. Now I get a notification with a beep when I receive a new voicemail. Still no icon but it is something. I also have downloaded the vvm apk. It also won't install because there is a hidden ap with the same name.
gungashoot said:
Same Phone - Same Problem
Today I had a Verizon tech. set me up on the old Verizon voicemail system. Now I get a notification with a beep when I receive a new voicemail. Still no icon but it is something. I also have downloaded the vvm apk. It also won't install because there is a hidden ap with the same name.
Click to expand...
Click to collapse
well I got mine resolved. Called Verizon, asked for tech support, told her I had an unlocked s8+ and it's not displaying voicemail notifications and to take everything vvm away and go to basic. She had to look into it but then told me to restart my phone, she left a message and fixed. Now displaying notification.
What do you mean "take everything VVM away"?
IMMORTALKING69 said:
well I got mine resolved. Called Verizon, asked for tech support, told her I had an unlocked s8+ and it's not displaying voicemail notifications and to take everything vvm away and go to basic. She had to look into it but then told me to restart my phone, she left a message and fixed. Now displaying notification.
Click to expand...
Click to collapse
I also bought a carrier-free unlocked S8 and was told by Verizon tech support that I wouldn't be able to install VVM and would have to use a third party app to get voicemail notification. Was your phone an unlocked carrier-specific phone?
---------- Post added at 07:01 PM ---------- Previous post was at 06:57 PM ----------
gungashoot said:
Same Phone - Same Problem
Today I had a Verizon tech. set me up on the old Verizon voicemail system. Now I get a notification with a beep when I receive a new voicemail. Still no icon but it is something. I also have downloaded the vvm apk. It also won't install because there is a hidden ap with the same name.
Click to expand...
Click to collapse
Where did you find the vvm apk? Was it the one linked earlier in the thread? I'm wondering if it would work on my SM-G950U1 model.
MizAndroid said:
I also bought a carrier-free unlocked S8 and was told by Verizon tech support that I wouldn't be able to install VVM and would have to use a third party app to get voicemail notification. Was your phone an unlocked carrier-specific phone?
---------- Post added at 07:01 PM ---------- Previous post was at 06:57 PM ----------
Where did you find the vvm apk? Was it the one linked earlier in the thread? I'm wondering if it would work on my SM-G950U1 model.
Click to expand...
Click to collapse
That was just the wording I used to imply to the Verizon tech that I thought would be full blown but was actually promptly helpful. I wanted no vvm on my account to just have old-school basic. That's how I said it hoping they would understand. You won't get vvm unless you use 3rd party apps line goggle voice which I couldn't get to work that essentially forward your voicemail to 3rd party apps. Old-school works fine for me. I'm forced to use it on my pos iPhone 5s for work anyways.
MizAndroid said:
Where did you find the vvm apk? Was it the one linked earlier in the thread? I'm wondering if it would work on my SM-G950U1 model.
Click to expand...
Click to collapse
I beleive that's a no go. I have a Verizon S8 but I switched to the U1 firmware and the apk linked above does not work either
Thanks. Hopefully I'll be able to flash the Verizon firmware and see if that works. It would be so much nicer if I could just install the app.
I'm looking for a way to get Sprint Visual Voicemail without all of Sprint's bloatware. As stated in the title, I have the Unlocked Note8. I see that other carriers offer an app in the Play Store for visual voicemail, but it looks like for Sprint it only comes in a package deal. I was just wondering if there was an apk out there or something.
Steigerelli said:
I'm looking for a way to get Sprint Visual Voicemail without all of Sprint's bloatware. As stated in the title, I have the Unlocked Note8. I see that other carriers offer an app in the Play Store for visual voicemail, but it looks like for Sprint it only comes in a package deal. I was just wondering if there was an apk out there or something.
Click to expand...
Click to collapse
flash my rom with flashfire. its included as well as the wifi calling etc. This will block hotspot by default if not on ur plan so ull have to edit the apns or do the hotspot trick to get it working . otherwise its the best way to go if you are sprint!
or if ur lazy, flash this with flashfire and hope for the best.
Sprint VVM For note 8:
https://www.androidfilehost.com/?fid=889964283620765007
Team DevDigitel said:
flash my rom with flashfire. its included as well as the wifi calling etc. This will block hotspot by default if not on ur plan so ull have to edit the apns or do the hotspot trick to get it working . otherwise its the best way to go if you are sprint!
or if ur lazy, flash this with flashfire and hope for the best.
Sprint VVM For note 8:
https://www.androidfilehost.com/?fid=889964283620765007
Click to expand...
Click to collapse
Anyway to flash the app on uprooted unlocked phone
wa0qbu said:
Anyway to flash the app on uprooted unlocked phone
Click to expand...
Click to collapse
Unpack the zip and try to install as a user app. Otherwise no
Tried that already . Thanks
Sent from my SM-T550 using XDA Free mobile app
I just unzipped the file and found the base.apk, uploaded that to my phone and installed it. Installed and worked fine on my unlocked Note 8 on Sprint. Thanks
Riptide9 said:
I just unzipped the file and found the base.apk, uploaded that to my phone and installed it. Installed and worked fine on my unlocked Note 8 on Sprint. Thanks
Click to expand...
Click to collapse
Are you rooted or stock?
Steigerelli said:
Are you rooted or stock?
Click to expand...
Click to collapse
100% stock
Riptide9 said:
100% stock
Click to expand...
Click to collapse
I did the same thing. I have the app, but my voicemails don't show up on the VVM app. They go straight to old school voicemail. I'm not sure if I need to do something special to activate it.
That is the same results I have gotten. App seems to function correctly just not connecting to email server. I will keep searching for solution.
Sent from my SM-T550 using XDA Free mobile app
Any update
I was about to give in and use Google voice integration with sprint, but now that is being deprecated june 1st 2018. A thread from sprint keeps promising a visual voicemail for unlocked phones would be released, but the release date just keeps slipping in perfect vaperware fashion.
I pray for an answer.
cocokola said:
I was about to give in and use Google voice integration with sprint, but now that is being deprecated june 1st 2018. A thread from sprint keeps promising a visual voicemail for unlocked phones would be released, but the release date just keeps slipping in perfect vaperware fashion.
I pray for an answer.
Click to expand...
Click to collapse
Sprint users will still be able to use Google Voice as a forwarding service like other people with different carriers do. What's ending is the Sprint integration which is different from the forwarding service for voicemail.
I want visual voicemail, or to use Google voice mail with my sprint phone, phone number to essentially get visual voicemail.. That is what is ending.. Right?
From Idrees Patel's article on front page of XDA;
"However, it does not affect customers who use Google Voice with a Sprint forwarding phone who have not enabled the “Google Voice with Sprint” integration, as only the integration is being disabled."
I have been with Sprint for at least six or seven years and have had Google Voice the entire time. The "Sprint Integrated Google Voice" is going away but that just means you can't COMBINE your Sprint and Google Voice numbers into a single number for outgoing and incoming calls.
This only really affects people that used the outgoing services of Google Voice, i.e. International callers in my experience. There is a simple test to see if you will be affected by this. If you have a Google Voice phone number that is different from your Sprint cell phone number you will not be affected by the change on June 1st.
If your current cell number is listed as your Google Voice number then your phone is "integrated" and you will need to apply for a new Google Voice number.
I have had my phone integrated and non-integrated with GVoice over the years and it never affected voicemail forwarding and transcription. THAT, is what I (and I believe the vast majority of users) care about and is not changing so I wouldn't worry about it too much.