Related
Hi, its 11:30 and i give up!
ok i first installed cwm using the kernel, and falshed SuperSU and than wiped data and cache and dalvik and flashed resRemix so i can reboot again and flash cwm, the problem is when i flash reRemix it goes to rom but also replaces the recovery with cyanogenmod one which doens't have any flashh zip and if i re flash the kernel with fastboot it will get stuck in sony logo reboot !
if i install both without booting to rom first it will reboot in middle of setup(first time setup name etc always at activating cellular)
this time i don't know what happened but it also freezed and rebooted on the bare-rom, but it worked before that (i assume i was tired and did something wrong)
what should i do?!
kamranhaghighi said:
Hi, its 11:30 and i give up!
ok i first installed cwm using the kernel, and falshed SuperSU and than wiped data and cache and dalvik and flashed resRemix so i can reboot again and flash cwm, the problem is when i flash reRemix it goes to rom but also replaces the recovery with cyanogenmod one which doens't have any flashh zip and if i re flash the kernel with fastboot it will get stuck in sony logo reboot !
if i install both without booting to rom first it will reboot in middle of setup(first time setup name etc always at activating cellular)
this time i don't know what happened but it also freezed and rebooted on the bare-rom, but it worked before that (i assume i was tired and did something wrong)
what should i do?!
Click to expand...
Click to collapse
Flash other kernel with flashtools, entry in recovery wipe cache davilk cache and data/factory reset, flash the rom with recovery and the boot.img with flashtools.
Sorry for my bad english
I have linux, ia flashtool the only way?
My problem is flashing gapps, if i want to flash it i need cwm and cwm gets replaced when i flash the rom, and xda tutorial for flashing cwm (kernel.elf) makes mt device get stuck in sony logo and bootloop!
Guizão BR said:
Flash other kernel with flashtools, entry in recovery wipe cache davilk cache and data/factory reset, flash the rom with recovery and the boot.img with flashtools.
Sorry for my bad english
Click to expand...
Click to collapse
wait, what do is boot.img?! why do i have to flash it?! i have no idea what it is! this was much easier on my nexus
kamranhaghighi said:
wait, what do is boot.img?! why do i have to flash it?! i have no idea what it is! this was much easier on my nexus
Click to expand...
Click to collapse
Boot.img is the kernel, you have to flashing him because the latest version of this rom is for unlocked bootloader
Guizão BR said:
Boot.img is the kernel, you have to flashing him because the latest version of this rom is for unlocked bootloader
Click to expand...
Click to collapse
where can i get it? and I will get CWM with it? (for flashing gapps)
kamranhaghighi said:
where can i get it? and I will get CWM with it? (for flashing gapps)
Click to expand...
Click to collapse
Is inside the rom file, you have to unpack and flashing after using flashtools, you know how to use flashtools?
Guizão BR said:
Is inside the rom file, you have to unpack and flashing after using flashtools, you know how to use flashtools?
Click to expand...
Click to collapse
Im not sure, i know how to use fastboot btw! (btw i got ubuntu, if its a software or something i need it to have a linux version)
Guizão BR said:
Is inside the rom file, you have to unpack and flashing after using flashtools, you know how to use flashtools?
Click to expand...
Click to collapse
i will just google flash tools and do what you said when i get the chance, will post abck if i get into trouble
kamranhaghighi said:
i will just google flash tools and do what you said when i get the chance, will post abck if i get into trouble
Click to expand...
Click to collapse
You can flash kernel with normal fastboot too of course! if the kernel name and formal will be boot.img just type command in fastboot
fastboot flash boot boot.img
Spasik said:
You can flash kernel with normal fastboot too of course! if the kernel name and formal will be boot.img just type command in fastboot
fastboot flash boot boot.img
Click to expand...
Click to collapse
thanks, but i don't get it, boot.img is the kernel isn't it going to be flashed with the rom?! and how can i flash the GAPPS after rebooting, because it quires me to do it after doing the first boot!
kamranhaghighi said:
thanks, but i don't get it, boot.img is the kernel isn't it going to be flashed with the rom?! and how can i flash the GAPPS after rebooting, because it quires me to do it after doing the first boot!
Click to expand...
Click to collapse
Ok i will try to explain the metod i use
First of all i have functioning phone on any rom
than i flash doomkernel or williams kernel
in these two kernels there are integrated all 3 recoverys cwm twrp philz
i boot the phone to any recovery i like (i preffer cwm)
in recovery i wipe data, cache, system, and internal memory because i have zips on sd card
flash the rom
if in the tutorial of rom is to flash gapps after first boot i just boot the phone to new rom
then i power off the device and flash doomkernel/williamskernel
after that ,i flash from recovery of these kernels the gapps
after flash of gapps is complete i power off the device and flash original kernel from rom i have
viola magic is complete
Spasik said:
Ok i will try to explain the metod i use
First of all i have functioning phone on any rom
than i flash doomkernel or williams kernel
in these two kernels there are integrated all 3 recoverys cwm twrp philz
i boot the phone to any recovery i like (i preffer cwm)
in recovery i wipe data, cache, system, and internal memory because i have zips on sd card
flash the rom
if in the tutorial of rom is to flash gapps after first boot i just boot the phone to new rom
then i power off the device and flash doomkernel/williamskernel
after that ,i flash from recovery of these kernels the gapps
after flash of gapps is complete i power off the device and flash original kernel from rom i have
viola magic is complete
Click to expand...
Click to collapse
thanks will try that when i see him again
Hi Guys,
Im using a bootloader unlocked c5302 with stock rom(clean installed via flashtool) and cwm 6.0.4 recovery on it. i want to be able to flash cm12.1 on it for which i need updated recovery. i have tried rashr and fastboot both to flash the updated recovery. rashr seems to flash the recovery.img but when i reboot to new recovery its still the old one..and in fastboot it says "recovery partition not found". i dont know what im doing wrong. can someone please help with thiss??
flash t-kernel with fastboot mode ...it includes twrp recovery which is very good
reboot to it ....do a full wipe then flash cm12.1
flash- said:
flash t-kernel with fastboot mode ...it includes twrp recovery which is very good
reboot to it ....do a full wipe then flash cm12.1
Click to expand...
Click to collapse
It worked thanks so much man! Cheers
hi everyone,
i downloaded OFFICIAL 6.0.1 CyanogenMod 13.0,i worked on it whole weekend,now i have fully working android but not working recovery,if i would tried flash recovery through fastboot then will work only recovery and system would be gone,work just system or recovery,some way how to get both?
sorry for bad english im czech
sindymichal said:
hi everyone,
i downloaded OFFICIAL 6.0.1 CyanogenMod 13.0,i worked on it whole weekend,now i have fully working android but not working recovery,if i would tried flash recovery through fastboot then will work only recovery and system would be gone,work just system or recovery,some way how to get both?
sorry for bad english im czech
Click to expand...
Click to collapse
Download the latest TWRP.zip from here and flash it via Cyanogen Recovery.
And if that doesn't work, you can flash the TWRP.img via fastboot,
then reboot,
it will directly boot into TWRP,
then from TWRP flash the ROM.zip and TWRP.zip without wiping anything.
Can I use the stock rom with the offical twrp?
If I can somebody could tell me how to boot the system because If I install twrp as a Kernel image It can t boot.
in order to use Official TWRP Recovery, you should unlock your Z1 to access the Recovery partition and after that you can do it.
lm/\/trix said:
in order to use Official TWRP Recovery, you should unlock your Z1 to access the Recovery partition and after that you can do it.
Click to expand...
Click to collapse
I have root and my bootloader unlocked so If u have time can you help me a little bit? How to install twrp?
so if you have Unlocked Bootloader on your Z1 just boot your Sony into Fast Boot mode and flash TWRP recovery image by these commands.
fastboot flash recovery [RECOVERY FILE ADDRESS]
nemes480 said:
Can I use the stock rom with the offical twrp?
If I can somebody could tell me how to boot the system because If I install twrp as a Kernel image It can t boot.
Click to expand...
Click to collapse
Obviously if you put recovery image in boot partition . How will the system boot ??
Put recovery in recovery partition
fastboot flash recovery insertrecoveryname.img
lm/\/trix said:
so if you have Unlocked Bootloader on your Z1 just boot your Sony into Fast Boot mode and flash TWRP recovery image by these commands.
fastboot flash recovery [RECOVERY FILE ADDRESS]
Click to expand...
Click to collapse
Jeah I know that but i get a message back :tmp-mksh:fastboot: not found . And i tryed to install it with NUT s recovery's twrp but if I install it to FOTAkernel just the recovery boot. Maybe fastboot driver what I should have but I installed that long time ago. Sorry for my english.
in the other side of the coin you should reinstall fastboot and drivers.
lm/\/trix said:
in the other side of the coin you should reinstall fastboot and drivers.
Click to expand...
Click to collapse
I did it. Same things when I try to install the twrp. I tryed it after clean flash the stock rom but it not solve my problem. any idea?
try it on another pc!
It will be okay just I need to take the phone to fastboot mode. But I installed again the nuts so tomorrow I will try it. Thanks everyone.
Well, I can t solve the problem. Still cannot install twrp. Please somebody help me. Stock rom support twrp?
Just flash the latest .236 stock rom and boot into fastboot and flash twrp recovery as RECOVERY not KERNEL!
Look, I tryed to flash stock after do this process but It never worked.
Hi guys,
I flash Havoc-OS on Mi9T Pro Global PFKMIXM 10.3.1 by TWRP, after reboot do not start system and not enter on TWRP again.
I try this commands on fastboot below.
Code:
adb devices
fastboot flash recovery recovery.img
fastboot boot recovery.img
fastboot reboot recovery
Can anyone give me a help?
Thanks.
fastboot devices
fastboot flash recovery recovery.img
> now just push volume up + power to boot to twrp. (those boot and reboot not working some reason always)
... i tried use same custom rom, but fail also. Then i test LineageOS, that boot normally. I used EUxxx ROM before and after. I just got enought to test custom roms so far.
S3miniFin said:
fastboot devices
fastboot flash recovery recovery.img
> now just push volume up + power to boot to twrp. (those boot and reboot not working some reason always)
... i tried use same custom rom, but fail also. Then i test LineageOS, that boot normally. I used EUxxx ROM before and after. I just got enought to test custom roms so far.
Click to expand...
Click to collapse
Hi friend, mainly thanks for helping.
I tried your suggestion, but it doesn't work.
I restored with Mi Flash Tolls, the only alternative. Now it works well.
You will now try the Flash I Rom and waiting for new updates and then flash any custom rom.
After I want share stuff tools and congratulations.
Have nice guys!
I have the same stuck in fastboot No recovery img, no rom loaded so cant use XiaoMiTool
I booted into TWRP but it didnt ask me for my dycrpt password or somehow i wasnt paying attention and when in with cancel.
I was preparing to flash a new ROM so i wiped all but user data then went to flash my ROM and found i was in the wrong partition
so i rebooted TWRP back into recovery but it booted to fastboot
once i realised i had no recovery i tried flashing again it says it passes but doesnt boot to recovery?
any ideas please.
E:\Downloads\Mobile Phone\ADB>fastboot flash recovery twrp-3.3.1-13-raphael-mauronofrio.img
target reported max download size of 805306368 bytes
sending 'recovery' (65536 KB)...
OKAY [ 1.400s]
writing 'recovery'...
OKAY [ 0.332s]
finished. total time: 1.732s
E:\Downloads\Mobile Phone\ADB>
Click to expand...
Click to collapse
Madaz2 said:
I have the same stuck in fastboot No recovery img, no rom loaded so cant use XiaoMiTool
I booted into TWRP but it didnt ask me for my dycrpt password or somehow i wasnt paying attention and when in with cancel.
I was preparing to flash a new ROM so i wiped all but user data then went to flash my ROM and found i was in the wrong partition
so i rebooted TWRP back into recovery but it booted to fastboot
once i realised i had no recovery i tried flashing again it says it passes but doesnt boot to recovery?
any ideas please.
Click to expand...
Click to collapse
Yes, that's what happened to me.
The only solution I found was to install the new rom via fastboot.
For this you will need to perform the following steps:
1 - Install Mi Flash + drivers (this is boring, if you have Windows 7, it will be easier). In this link you will find some downloads and more details.
2 - Download the Sotck Rom (for fastboot important) from your device, in my case it was PFKMIXM 10.3.1 for Mi9T Pro. You need to extract zip then before.
3 - Flash the new rom via fastboot (approximately 10 minutes).
After that, your device will start with the new rom, then you can flash TWRP again and everything will work. The Magisk installation may cause error 1, but only flash boot.img through TWRP.
Be quick, because if the battery drain, you won't be able to start it in fastboot again.
If you need any links, ask me. I didn't have time to share everything.
Have a nice and good luck!!
Madaz2 said:
I have the same stuck in fastboot No recovery img, no rom loaded so cant use XiaoMiTool
I booted into TWRP but it didnt ask me for my dycrpt password or somehow i wasnt paying attention and when in with cancel.
I was preparing to flash a new ROM so i wiped all but user data then went to flash my ROM and found i was in the wrong partition
so i rebooted TWRP back into recovery but it booted to fastboot
once i realised i had no recovery i tried flashing again it says it passes but doesnt boot to recovery?
any ideas please.
Click to expand...
Click to collapse
To boot to recovery After fastboot flash recovery , you will need also a system...
As you wiped all, you dont have anymore. I made the same mistake when decrypting After unlocking.
Extract system.img from stock fastboot rom and fastboot flash system system.img.
Then again (why not lol) fastboot flash again reco and reboot to recovery with buttons.
If it dont work , miflashtool will recover it ( DONT SELECT CLEAN_LOCK)
rodolphe06 said:
To boot to recovery After fastboot flash recovery , you will need also a system...
As you wiped all, you dont have anymore. I made the same mistake when decrypting After unlocking.
Extract system.img from stock fastboot rom and fastboot flash system system.img.
Then again (why not lol) fastboot flash again reco and reboot to recovery with buttons.
If it dont work , miflashtool will recover it ( DONT SELECT CLEAN_LOCK)
Click to expand...
Click to collapse
Yes, very important.
In Mi Flash, check only "Clean All" dont clean and lock.
Thanks.
thanks, hopefully i didnt break it further as i accidently flashed a global indian ROM when i should have flashed CN
now my only option might be EDL via testpoint, i have a mate who can help i will try and find the right version CN rom tonight and go slower
Madaz2 said:
thanks, hopefully i didnt break it further as i accidently flashed a global indian ROM when i should have flashed CN
now my only option might be EDL via testpoint, i have a mate who can help i will try and find the right version CN rom tonight and go slower
Click to expand...
Click to collapse
Thank you for sharing your experiences.
Too bad you couldn't recover. I hope you can do it again.
Today I had to flash twice, once because I flashed Kernel Quax and couldn't rollback and once for trying Rom Syberian. I hope that in the future we will have a firmware balanced with the customs kernel and roms.
Good luck.
Thanks I dont think it will work
i bought a Deep flash cable to see if i can get it into EDL mode without opening.
Madaz2 said:
Thanks I dont think it will work
i bought a Deep flash cable to see if i can get it into EDL mode without opening.
Click to expand...
Click to collapse
With flash cable or have you open?
Hot-Proton said:
With flash cable or have you open?
Click to expand...
Click to collapse
with flash cable, have to wait for it to arrive now.
if that doesn't work i will have to open and do EDL
Madaz2 said:
with flash cable, have to wait for it to arrive now.
if that doesn't work i will have to open and do EDL
Click to expand...
Click to collapse
I think works, for me it was like this.
Have nice.