Database Develop

Blackberry Work App and Magisk

I've seen a few threads on the Blackberry Work app, but they all seemed have become idle at the end of 2017. Has anyone been able to run new versions of Blacberry Work with the new versions of Magisk?
I'm running an unrooted custom ROM, but the way new versions of the ROM are compiled (using Android Clang) are triggering the checker. Was hoping I could flash Magisk to hide root and custom rom detection from the app.

It depends on what the app is detecting, of course, but take a look under "Hiding root from apps" in the troubleshooting guide. The rest of the post might have some useful tips as well.

I ended up installing Magisk and hiding from the app. It works really well, so we can go ahead and close this thread. Thanks for the follow up.

napes22 said:
I ended up installing Magisk and hiding from the app. It works really well, so we can go ahead and close this thread. Thanks for the follow up.
Click to expand...
Click to collapse
Is BB Work still working for you with Magisk? Our company moved to BB Good (now Work) years ago. I stopped rooting back then since it was too much of a hassle to figure out and I need to have my work email. If this works, the only thing holding me back would be getting official updates from OnePlus. I have the 5T.

jvnat said:
Is BB Work still working for you with Magisk? Our company moved to BB Good (now Work) years ago. I stopped rooting back then since it was too much of a hassle to figure out and I need to have my work email. If this works, the only thing holding me back would be getting official updates from OnePlus. I have the 5T.
Click to expand...
Click to collapse
Yes I can confirm that magisk root does work with BB Work. You have to use the "hide" function in the Magisk Manager and select BB work.
FYI
I am using a stock rom with root.
Tip: don't use xposed framework if you want a working BB work app.

I flashed Magisk in my redmi note 3 kate and installed the magisk manager apk app, everything is working fine, but my question is: Should I install phhSuperUse, rather than this variant has SU because it was built to be installed with magisk ?
Excuse me, I'm not very familiar with the subject and I've been reading about this and I'm a little confused
---------- Post added at 10:22 PM ---------- Previous post was at 10:20 PM ----------
What is the difference when using the magisk modules?
always use xposed framework plus S.U. But since I can no longer download some apps in play store I have resorted to install magisk on my device.

Hello,
Is it still working ?
It work with Good for Enterprise , but i am not able to install UEM Client and BB Work ?
UEM Client seems fine and show device as unrooted but then setting up Blackberrry Dynamics failed due to that , any idea ?
Regards,

Darkwa said:
Yes I can confirm that magisk root does work with BB Work. You have to use the "hide" function in the Magisk Manager and select BB work.
FYI
I am using a stock rom with root.
Tip: don't use xposed framework if you want a working BB work app.
Click to expand...
Click to collapse
I have a message bb work data wiped. And installation fails at the last point. How can I solve it?
Greetings
Wysłane z mojego MI 6 przy użyciu Tapatalka

As of yesterday, blackberry is detecting my root for some reason. Nothing has changed so my guess is that it has something to do with my company's policy changing? At this point I'm very confused

napes22 said:
As of yesterday, blackberry is detecting my root for some reason. Nothing has changed so my guess is that it has something to do with my company's policy changing? At this point I'm very confused
Click to expand...
Click to collapse
I am in the same boat. I can no longer get Magisk 18.0 and BB Work (or any of the BB enterprise apps) to function. I immediately get the "jailbroken" message. I have no idea what changed. :crying:
I am going to try 18.1 and will report if things change.

DaCHeF36 said:
I am in the same boat. I can no longer get Magisk 18.0 and BB Work (or any of the BB enterprise apps) to function. I immediately get the "jailbroken" message. I have no idea what changed. :crying:
I am going to try 18.1 and will report if things change.
Click to expand...
Click to collapse
Magisk 18.1, Manager 7.0, and following this guide is what works:
https://www.didgeridoohan.com/magisk/MagiskHide
Make sure the "Basics" are taken care of, manually.
Hide Magisk Manager package under settings, MagiskHide "Work" only now (no "Work Profile" choice present in the new version). I removed all root-requiring apps. The combo here worked. I may go one by one to see if any of those apps made a difference. Regardless, it works following those instructions. Good luck. :good:

DaCHeF36 said:
Magisk 18.1, Manager 7.0, and following this guide is what works:
https://www.didgeridoohan.com/magisk/MagiskHide
Make sure the "Basics" are taken care of, manually.
Hide Magisk Manager package under settings, MagiskHide "Work" only now (no "Work Profile" choice present in the new version). I removed all root-requiring apps. The combo here worked. I may go one by one to see if any of those apps made a difference. Regardless, it works following those instructions. Good luck. :good:
Click to expand...
Click to collapse
Perfection, thanks so much. Running DU on taimen with Magisk 18.1 substratum TitaniumBackup Franco app. All good!
Sent from my Pixel 2 XL using Tapatalk

Blackberry Appstore
bigknowz said:
Perfection, thanks so much. Running DU on taimen with Magisk 18.1 substratum TitaniumBackup Franco app. All good!
Sent from my Pixel 2 XL using Tapatalk
Click to expand...
Click to collapse
@DaCHeF36 Spoke too soon, not able to load BB Access or Appstore, thoughts?

bigknowz said:
@DaCHeF36 Spoke too soon, not able to load BB Access or Appstore, thoughts?
Click to expand...
Click to collapse
I'm not sure about the Appstore, but I am stuck at an "Authenticating" screen for Access. If I make any progress I'll let you know.

Canary
DaCHeF36 said:
I'm not sure about the Appstore, but I am stuck at an "Authenticating" screen for Access. If I make any progress I'll let you know.
Click to expand...
Click to collapse
Everything works on Canary, running 18100.

bigknowz said:
Everything works on Canary, running 18100.
Click to expand...
Click to collapse
Magisk 19.0 and the new 7.1.1 Manager combination seem to work with all BB apps. Maybe it's just me, but the Work Profile option returned in Hide.

Are there any dependencies for BB apps we need to also hide from Magisk?

DaCHeF36 said:
Magisk 19.0 and the new 7.1.1 Manager combination seem to work with all BB apps. Maybe it's just me, but the Work Profile option returned in Hide.
Click to expand...
Click to collapse
I only need to use the BB work app, are you hiding any other app except BB Work ? Also,a) are you hiding the Magisk Manager, b)using Magisk Hide to hide BB Work or c)doing both?

TarunN5 said:
I only need to use the BB work app, are you hiding any other app except BB Work ? Also,a) are you hiding the Magisk Manager, b)using Magisk Hide to hide BB Work or c)doing both?
Click to expand...
Click to collapse
Work and Work profile setup are hidden. Work profile setup is definitely there again. I use Access, Tasks, and Connect too. I have them all hidden even though that may be overkill. I hide Magisk Manager using the built in package option too. I also followed the guide to ensure that all settings like debug, etc. were off. Gold. I excluded the BB apps from auto-updating. I don't plan to upgrade them unless the back-end requires it at some point.

DaCHeF36 said:
Work and Work profile setup are hidden. Work profile setup is definitely there again. I use Access, Tasks, and Connect too. I have them all hidden even though that may be overkill. I hide Magisk Manager using the built in package option too. I also followed the guide to ensure that all settings like debug, etc. were off. Gold. I excluded the BB apps from auto-updating. I don't plan to upgrade them unless the back-end requires it at some point.
Click to expand...
Click to collapse
Thanks, can you please tell me what exactly do you mean by "work profile" and "work profile setup". The app I see is i dont see a work profile app in the play store either. Can you also please send a screenshot of the BB apps that you have hidden in Magisk? This is the first time I'm using BB on my phone so pardon my noobness

Newest update of Sky Ticket app detects "modifications to your device"

I am running Magisk 16.0 on a Nexus 6 with stock 7.1.1, and unlocked bootloader and the latest stable Magisk 16.0. Safety Net is passed.
So apps like Mario Run work and also the former versions of Sky Ticket worked fine. But since the latest update of Sky Ticket, it detects modifications to my device after clicking to play a stream. The app is hidden by Magisk Hide so I don't know what else to do. Any suggestions?

https://www.didgeridoohan.com/magisk/MagiskHide#hn_Hiding_root_from_apps

Got the same problem, did not find a solution yet.
Anyone knows more?
[edit]
Hiding the Magisk Manager, clearing cache and data for the sky ticket app and reboot of my device did suddenly work.
I tried that last time and it did not work, so I have missed something or SKY changed something.

Same problem after updating Sky Go.
Hidden but still detected. Done all the usual clearing cache etc, unhide, reboots etc.
Working one minute, update the app (can't avoid this due to in app message) and then root detected.

Same problem
Anyone got a solution yet?

Sky Ticket version 2.4.1 runs flawlessly.
You can use Sky Ticket version 2.4.1.
On my phone this version runs flawlessly.
You can download this version of apkmonk or other trusted sites. (Download Sky Ticket 2.4.1 from apkmonk: https://www.apkmonk.com/download-app/de.sky.online/5_de.sky.online_2018-06-06.apk/)
Then remove this app from the automatic updates in PlayStore and you're done.
My phone is running Lineage 15.1 with Magisk in version 16.0 and Magisk Hide also I have hidden Magisk under Magisk settings.
I hope it helps.

info.brandenburg said:
You can use Sky Ticket version 2.4.1.
On my phone this version runs flawlessly.
You can download this version of apkmonk or other trusted sites. (Download Sky Ticket 2.4.1 from apkmonk: https://www.apkmonk.com/download-app/de.sky.online/5_de.sky.online_2018-06-06.apk/)
Then remove this app from the automatic updates in PlayStore and you're done.
My phone is running Lineage 15.1 with Magisk in version 16.0 and Magisk Hide also I have hidden Magisk under Magisk settings.
I hope it helps.
Click to expand...
Click to collapse
Hi,
is it still running for you? I just tried before with 2.4.1, and it did not play anything with an error (something about checking license bla bla).
Thanks
Andi

Just tried and 2.4.1 still works.

mugendon said:
Just tried and 2.4.1 still works.
Click to expand...
Click to collapse
Thanks, with the one you linked it works for me as well now.
Just hope it will work for longer time before Sky removed that root checking nonsense.
I filed a complaint with them today and for now terminated my tickets temporarily, would recommend anyone else also does it.
Andi

Perhaps the same kind of "root" detection as here?:
https://forum.xda-developers.com/apps/magisk/magisk-hide-defeated-nemid-code-app-t3810500
TLDR basically it seems to detect whether you have root apps installed, like magisk manager or xposed installer.

This version is not working any more on rooted devices..
Any new ideas?

Whumpscut said:
This version is not working any more on rooted devices..
Any new ideas?
Click to expand...
Click to collapse
I got latest official sky ticket app version running by:
- installing Magisk 17.2
- Hiding sky ticket app in magisk
- hiding magisk manager (in magisk app settings)
After doing that, it worked.
Andi

To be on the safe side you should also clean the sky ticket data and cache and do a reboot of your phone before you start the app.

I will try in vain with a SM-P605 RR-N-v5.8.5. Unfortunately without success. 2.4.1 Sky Ticket is no longer fun and needs updating. Maybe the Kernel is to old (Version 3.4.113) and Magisk (6 / 17.2) won´t work correctly? Any other idea or possibilities?

Lord Boeffla said:
I got latest official sky ticket app version running by:
- installing Magisk 17.2
- Hiding sky ticket app in magisk
- hiding magisk manager (in magisk app settings)
After doing that, it worked.
Andi
Click to expand...
Click to collapse
This worked for me too, magisk 17.1

Any actual success on this? I tried the old version and the actual version of Sky Ticket on a Nexus 7 running LOS 14 with Magisk Hide. The old version complains I should click on the link in the welcome mail (which I did), the actual version complains about modifications also after the steps posted by Lord Boeffla.

I gave up with SKY and quit my subscription a long time ago , if they do not want to have my money, someone else gets it.
For football you can go for eurosportplayer, they have the license for almost all European leagues (depending on your location), for tv shows and movies Netflix and Amazon Prime are good enough.
All of them work fine on my rooted device with Magisk.

I have only a trial account as I wanted to watch Chernobyl, but streaming via browser does not work on Linux as they provide an extra software for Windows and Mac. Great, as Netflix and Amazon Prime work fine with DRM in Firefox and Sky implement a lot of thinks just not to work.

Bitdefender phone app detecting Magisk as PUA

Hello, I've been using Magisk for about 3 years on my Xperia XZ and it's been working without any issues, and I've also been using Bitdefender app for over a year and there have been no conflicts or issues whatsoever, that was the case until today when I was updating Magisk (the manager app also) to the latest version 20.1 and for the manager 7.4.0 then Bitdefender reported both of them as PUA and if I remember correctly as trojan also, I uninstalled them immediately until I get some feedback on this.
So any ideas on this?

False positive, although rooting a phone is a security problem! (that means your scanner is right about reporting it) so either negate/ignore magisk warning in your virus check, or add your virus scanner to magisk-hide.
Verstuurd vanaf mijn ONEPLUS A6003 met Tapatalk

broomer68 said:
False positive, although rooting a phone is a security problem! (that means your scanner is right about reporting it) so either negate/ignore magisk warning in your virus check, or add your virus scanner to magisk-hide.
Verstuurd vanaf mijn ONEPLUS A6003 met Tapatalk
Click to expand...
Click to collapse
The thing is Bitdefender has no issues with the old versions of Magisk, that's why I'm asking.
I guess I'll just use the old version of Magisk and wait for a newer version than the current one.
Thanks for your time.

Qattos said:
The thing is Bitdefender has no issues with the old versions of Magisk, that's why I'm asking.
I guess I'll just use the old version of Magisk and wait for a newer version than the current one.
Thanks for your time.
Click to expand...
Click to collapse
Like already stated, false positive... Most likely brought on by the new stub apk implementation. Nothing to worry about and if you just repackage the Manager Bitdefender won't be able to detect you have the app installed anyway.

Didgeridoohan said:
Like already stated, false positive... Most likely brought on by the new stub apk implementation. Nothing to worry about and if you just repackage the Manager Bitdefender won't be able to detect you have the app installed anyway.
Click to expand...
Click to collapse
+1
I know it's false positive but the fact that it so easy detects even re-packaged MM and Installer as rooter apps a bit alarming.

gkornaks said:
+1
I know it's false positive but the fact that it so easy detects even re-packaged MM and Installer as rooter apps a bit alarming.
Click to expand...
Click to collapse
Is it detecting the v7.4.0+ stub repackaged Manager? If so, it's doing a damned good job and hats off to them.
If you're not using the v7.4.0+ stub repackaged Manager it's unfortunately impossible to completely hide it...

V7.4.0 re-packaged. The strange things is that all previous versions were never detected.

gkornaks said:
V7.4.0 re-packaged. The strange things is that all previous versions were never detected.
Click to expand...
Click to collapse
I'm assuming you're on an Android version before Pie. If so the stub won't be used (it's new to v7.4.0, and as I said above I wouldn't be surprised if that is what they're reacting to) and completely hiding the Manager isn't possible. You'll likely just gonna have to live with it. Doesn't Bitdefender have a whitelist or something that you can use?

I'm on Pie. There's no whitelist in Bitdefender. I can live with it.

gkornaks said:
I'm on Pie. There's no whitelist in Bitdefender. I can live with it.
Click to expand...
Click to collapse
Now I'm curious. Is the stub installed? And what is it actually reporting about?

Installed directly from previous version of MM. Reporting: Riskware.Rooter.BH

gkornaks said:
Installed directly from previous version of MM. Reporting: Riskware.Rooter.BH
Click to expand...
Click to collapse
You're quite sparse when it comes to information, aren't you? :laugh: Not making it easy...
Let's take it one step at a time: What is the version information for your installed Manager (all possible info, maybe even a screenshot, please)?

Sorry, currently babysitting, wife at work See attached.

gkornaks said:
Sorry, currently babysitting, wife at work See attached.
Click to expand...
Click to collapse
Isn't that just called parenting?
Anyway, your setup is not using the stub (you would see a 3, the stub version, within brackets after your installed version). Meaning that completely hiding the Manager isn't possible and since you're on Pie it also means that broadcasts isn't working properly on your device. Could be caused by updating to Magisk v20.1 with an already hidden Manager. If you unhide the Manager, reboot the device and then rehide it, does it use the stub?

Still the same and yes I've upgraded to v20.1 from hidden MM.

Same here. Had Magisk for 2-3 years never problems until latest magisk manager update.

Strange Behaviour here.
Magisk 22.0 on Oneplus 8 Pro running OpenBeta 7 (Android 11/rooted)
As long as Magisk is running with default name, everything is fine.
As soon as i hide the app with custom Name and ID, Bitdefender pops up with an Alarm stating Magisk as PUA and Riskware/downloader.
Changing Magisk back to normal, everything is fine again.
Kind of annoying.

qudo said:
Strange Behaviour here.
Magisk 22.0 on Oneplus 8 Pro running OpenBeta 7 (Android 11/rooted)
As long as Magisk is running with default name, everything is fine.
As soon as i hide the app with custom Name and ID, Bitdefender pops up with an Alarm stating Magisk as PUA and Riskware/downloader.
Changing Magisk back to normal, everything is fine again.
Kind of annoying.
Click to expand...
Click to collapse
It's not wrong... The stub that is used when hiding the app is a downloader. It's sole function is to download the main Magisk apk and dynamically load it.

Didgeridoohan said:
It's not wrong... The stub that is used when hiding the app is a downloader. It's sole function is to download the main Magisk apk and dynamically load it.
Click to expand...
Click to collapse
OK, so it works as designed.
Fair enough.
I can live with the Alarm in Bitdefender as long as i can use my Banking Apps and trick Microsoft Company Apps.

Same here since today Update of bitdefender... What can i do?

Sky go help needed to hide root with magisk

On my phone xiaomi A1 rooted it works on the wife's phone xiaomi note 5 pro rooted it used to work fine but for some reason it has suddenly detected root and won't work now. I have checked all the settings to do with hiding are still selected as before, strange thing is it has worked briefly for a few seconds but then stopped again.
Please can people tell me if they have had this happen and how they fixed it please.
What checks is it doing to detect root does anyone know?
Thanks

hycraig said:
On my phone xiaomi A1 rooted it works on the wife's phone xiaomi note 5 pro rooted it used to work fine but for some reason it has suddenly detected root and won't work now. I have checked all the settings to do with hiding are still selected as before, strange thing is it has worked briefly for a few seconds but then stopped again.
Please can people tell me if they have had this happen and how they fixed it please.
What checks is it doing to detect root does anyone know?
Thanks
Click to expand...
Click to collapse
Try updating magisk.
Try to disable xposed modules.
Try to disable all modules.
See if it works now.
Then one by one reenable them.
Sent from my SM-G985F using Tapatalk

vash_h said:
Try updating magisk.
Try to disable xposed modules.
Try to disable all modules.
See if it works now.
Then one by one reenable them.
Sent from my SM-G985F using Tapatalk
Click to expand...
Click to collapse
Thanks for your reply magisk is up to date and I don't have any modules just magisk on its own. I do find it strange how it just stopped working after many months of being used regularly.

hycraig said:
Thanks for your reply magisk is up to date and I don't have any modules just magisk on its own. I do find it strange how it just stopped working after many months of being used regularly.
Click to expand...
Click to collapse
Credits Google
Now safetynet fails after March update
You need to change device props to pixel or lock bootloader

hycraig said:
Thanks for your reply magisk is up to date and I don't have any modules just magisk on its own. I do find it strange how it just stopped working after many months of being used regularly.
Click to expand...
Click to collapse
Biggest_Noob said:
Credits Google
Now safetynet fails after March update
You need to change device props to pixel or lock bootloader
Click to expand...
Click to collapse
My safteynet passes fine on both my devices
Thanks

somehow they manage to detect root even if magisk manager is running under custom package name and magisk hide is enabled.
Last version that is still running is 13.1.1 (apk available on apkmirror).

h4lli said:
somehow they manage to detect root even if magisk manager is running under custom package name and magisk hide is enabled.
Last version that is still running is 13.1.1 (apk available on apkmirror).
Click to expand...
Click to collapse
thanks @h4lli i couldn't see sky go version 13.1.1 for uk
so i got Sky Go UK 12.4.14 from apkmirror and can confirm is working fine

yeah still doesnt work, latest sky go app 20, latest magisk, still detects, anyone able to reverse the sky app to see what methods its using?

Fyi - any version other than the latest (20.6.1) at the moment forces an upgrade to 20.6.1, which then detects root.
Safety net is passing both basic and cts with Eval type basic. I'm on latest canary (20425).
I've tried :-
Uninstalling all apps that skygo could look for (titanium, openvpn etc.)
Using a work profile (shelter and island)
Disabling oem unlocking
Disabling usb/adb debugging
Disabling developer options
Deleting all files and folders that have magisk, twrp or titanium in them.
Basically everything here https://www.didgeridoohan.com/magisk/MagiskHide#hn_Hiding_root_from_apps
So, I think it's basically no go for sky go at the moment. Happy to be corrected if someone has it working.
Beardy

beardymarrow said:
Fyi - any version other than the latest (20.6.1) at the moment forces an upgrade to 20.6.1, which then detects root.
Safety net is passing both basic and cts with Eval type basic. I'm on latest canary (20425).
I've tried :-
Uninstalling all apps that skygo could look for (titanium, openvpn etc.)
Using a work profile (shelter and island)
Disabling oem unlocking
Disabling usb/adb debugging
Disabling developer options
Deleting all files and folders that have magisk, twrp or titanium in them.
Basically everything here https://www.didgeridoohan.com/magisk/MagiskHide#hn_Hiding_root_from_apps
So, I think it's basically no go for sky go at the moment. Happy to be corrected if someone has it working.
Beardy
Click to expand...
Click to collapse
Yeah still can't get it working. Damn it.

Hast everyone a sollution for running the sky Go App on rooted phones?

Skygo doesnt Work... hast anyone a sollution?

eula1977 said:
Skygo doesnt Work... hast anyone a sollution?
Click to expand...
Click to collapse
Have you tried this? It worked for me
SkyGo app detected root!
Hi everyone i have a problema using SkyGo app on my device because It detects the root. I renamed magisk , used magisk Hide , tried magiskhide props config , tried to delete cache and re-install SkyGo app but nothing worked...any solution...
forum.xda-developers.com

banking app detecting root

I got a new banking app today that detects root, its https://play.google.com/store/apps/details?id=no.vipps.bankid
no problem with the Swedish bankid or other Norwegian banking apps. google pay/wallet works.
I tried blocking it in magisk block list. then with Shamiko, I'm afraid to test too many thing since google wallet is working now.

Try this modified USNF module. The issue you may be having is the new Play Integrity API.

I tried the previous version and now this one, still the same. I'm in no hurry to fix it, all other stuff work and the old bankid solution works 2 more years I think (hope)

I'm in your exact same position.
I have the MagiskHide module and used the DenyList, I also tried Shamiko, no luck for this app.
I tried the modified USNF module and no luck either.
I have several other apps where the above methods to avoid detection are working without problems, but not this one.

In the same boat as you guys. Also tried the modified magisk delta project with the old magisk hide, no luck.
Where is this?
SafetyNet is good, all other banking-and wallet-apps is working. RootBeer is not detecting root.
Oneplus 7t pro, stock latest stable rom. Magisk delta. Hide root from all apps. Renamed magisk app.

same problem here. tried everything i could find and no luck. might be a DRM problem? because 1 other issue i cant fix is apps like Netflix and prime video which are currently unusable because of DRM.

My app was updated today, and immidiatly after the update I tried activating/logging in, and to my surprise it worked. There is a one hour grace/waiting period to activate, and I'm currently waiting for that.
If it is not working after the wait, I will update this post. So if no update, it is working.
See my previous post in this thread about my setup.

jale said:
My app was updated today, and immidiatly after the update I tried activating/logging in, and to my surprise it worked. There is a one hour grace/waiting period to activate, and I'm currently waiting for that.
If it is not working after the wait, I will update this post. So if no update, it is working.
See my previous post in this thread about my setup.
Click to expand...
Click to collapse
same for me. so its probably okay for everyone for now. disable auto update on it now hahaha and lets hope it stays that way.

Can confirm, it works now without any change to Magisk or other modules.
I waited the 1h period and after that I was able to activate it and use it to login.
I am using Shamiko and a modified USNF module, but probably are not required.

Great to know that it's working now. But, for next time i can give u guyz some more option to keep in mind:
**renaming/deleting the "twrp/fox" folder of the recovery, deleting all files related to magisk or xposed. Also, hiding developer mode option by "devoptshide" from lsposed. **