Has anyone received an update of android one ui on the unlocked variant of the note
Which varient you are referring to? For which country?
Unlocked us variant SM-N960U1
We'll more than likely be last to get it. Yes it's unlocked but it still needs be "certified" by each carrier to work on their network.
All the carriers have to certify it? Cause I don't know if the US unlocked version works on Sprint.
Sent from my SM-N960U1 using Tapatalk
barondebxl said:
All the carriers have to certify it? Cause I don't know if the US unlocked version works on Sprint.
Click to expand...
Click to collapse
Carrier branded and US unlocked have all the same hardware, the only difference is the software.
sacnotsack said:
We'll more than likely be last to get it. Yes it's unlocked but it still needs be "certified" by each carrier to work on their network.
Click to expand...
Click to collapse
I don't think the carriers have to certify the update. The unlocked version should only have to be certified by Samsung and then sent OTA.
The unlocked versions are typically late to the upgrade party regardless of the reason unfortunately.
"Unlike other OEMs, Samsung certifies unlocked updates on all four carriers, which leads to delays."
https://www.androidpolice.com/2019/01/31/samsung-galaxy-note-9-on-att-gets-its-pie-update/
Finally found where I read it at.
sacnotsack said:
"Unlike other OEMs, Samsung certifies unlocked updates on all four carriers, which leads to delays."
https://www.androidpolice.com/2019/01/31/samsung-galaxy-note-9-on-att-gets-its-pie-update/
Finally found where I read it at.
Click to expand...
Click to collapse
But there's no mention there of what, if anything, is the source of that information.
Also, it doesn't say that the carriers certify the updates. It says Samsung certifies the updates on each carrier.
Yeah looks like I got it glip flopped on the certification.
I'm not saying I'm happy or agree that it should take so long for unlocked versions to get updates, but if there are more certifications required, then it makes sense that it would take longer.
I assume that when Samsung goes to get a device certified on a carrier, that carrier still has to give the green light and say it's good to go.
Wow, this is so annoying, evone is happy with his one ui.
My phone Sm-960U1 is stuck on ARL1 December patch. Will it ever upgrade or do I have to do it manually?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my SM-N960U1 using Tapatalk
Bublik2002 said:
My phone Sm-960U1 is stuck on ARL1 December patch. Will it ever upgrade or do I have to do it manually?View attachment 4700900
Sent from my SM-N960U1 using Tapatalk
Click to expand...
Click to collapse
You aren't stuck on anything. ARL1 is the most recent build available for the U1.
Mr. Orange 645 said:
You aren't stuck on anything. ARL1 is the most recent build available for the U1.
Click to expand...
Click to collapse
So I'll be able to upgrade to pie eventually OTA?
Sent from my SM-N960U1 using Tapatalk
Mr. Orange 645 said:
You aren't stuck on anything. ARL1 is the most recent build available for the U1.
Click to expand...
Click to collapse
Can you gimme a link to get the latest unlocked rom? Please.
I am receiving the pie update. I am on sm-n960w unlocked device purchased from Samsung. Using on Koodo network in canada.
Update: Phone booted in safe mod after update. asking for factory data reset!!
Bublik2002 said:
So I'll be able to upgrade to pie eventually OTA?
Sent from my SM-N960U1 using Tapatalk
Click to expand...
Click to collapse
Of course. Why wouldn't you be able to? You're on the latest official build for the U1. When an update is released, it will get pushed to you via OTA. Just like all the other monthly updates you've received.
rhaspody said:
Can you gimme a link to get the latest unlocked rom? Please.
Click to expand...
Click to collapse
I don't have a link, but you can download it with the SamFirm tool. That's the fastest and most reliable way to download firmwares.
For Sprint carrier, the unlocked version is supposed to start roll out Feb. 21. This is what was told to me when i contacted support asking why carrier note 9 got the update but mine has not.
kennethbb said:
For Sprint carrier, the unlocked version is supposed to start roll out Feb. 21. This is what was told to me when i contacted support asking why carrier note 9 got the update but mine has not.
Click to expand...
Click to collapse
The U1 unlocked modules will all get the update at the same time. And since it's pushed by Samsung and not the carriers, I'm not sure I would trust Sprint's word on that.
Related
Hello Guys,
I'm firmware addicted and i have a Nexus 6 in Europe (Origin: Denmark). I see that Google has released LMY47Z & LYZ28E. However i have read that i can flash LMY47Z on my International Nexus 6, and i would like to know if that is correct? Because Google says "LMY47Z For Sprint, USC ONLY" and i think this is not correct for my phone? Android Police says however its good to go with flashing this firmware as it is International
What do you guys think?
Screenshot from Android Police:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
@Oniska
I think you should try it and see. Little risk. I'm on AT&T (GSM carrier like Europe) and 47Z works fine for me.
47Z works well in Canada. You should have no issues flashing 47Z in Denmark.
I just don't want to mess up my modem/radio draining my battery because of bad signal... I know it will be working but is the firmware optimal for my device.
I'm unsure on this as well - how can AndroidPolice say "International (exc. US and Oceania) LMY47Z" and also "Sprint/USC LMY47Z" which contradicts itself, but then on Google's factory image site say "5.1.1 (For Sprint, USC ONLY) (LMY47Z)".
This is telling me that LMY47Z is not the for the international version of the Nexus 6
Taomyn: Exactly
Yeah I'm on ATT and don't know if I should do the Z build.
---------- Post added at 10:12 AM ---------- Previous post was at 10:11 AM ----------
Alaris said:
Yeah I'm on ATT and don't know if I should do the Z build.
Click to expand...
Click to collapse
Also my nexus is unlocked and bought through the google store so I would rather flash the base image instead of a carrier specific.
Alaris said:
Yeah I'm on ATT and don't know if I should do the Z build.
---------- Post added at 10:12 AM ---------- Previous post was at 10:11 AM ----------
Also my nexus is unlocked and bought through the google store so I would rather flash the base image instead of a carrier specific.
Click to expand...
Click to collapse
FWIW, I'm on AT&T and 47Z now, and it works fine. If something better/more specific comes out down the road, it's easy to flash the factory image.
cam30era said:
FWIW, I'm on AT&T and 47Z now, and it works fine. If something better/more specific comes out down the road, it's easy to flash the factory image.
Click to expand...
Click to collapse
So is the Z build the unlocked build for all of the phones bought through google play and Motorola?
Alaris said:
So is the Z build the unlocked build for all of the phones bought through google play and Motorola?
Click to expand...
Click to collapse
Good question. Unfortunately, I don't know the answer. I fastboot flashed the factory image files.
Off course it's easy to reflash later but setting up 80 apps from zero takes like 2 hours
LMY47Z OTA 5.1.1 update just received for my Nexus 6 on Straight Talk (AT&T Network).
jeff72k said:
LMY47Z OTA 5.1.1 update just received for my Nexus 6 on Straight Talk (AT&T Network).
Click to expand...
Click to collapse
Thanks for posting this info. This is the first non-Sprint device I've seen get 47Z OTA. Starts to answer some questions we've all had.
cam30era said:
Thanks for posting this info. This is the first non-Sprint device I've seen get 47Z OTA. Starts to answer some questions we've all had.
Click to expand...
Click to collapse
5.1.1 LMY47Z OTA update was 100.6 MB update according to the software update popup I got today.
My Nexus 6 was at 5.1 LMY47D prior to this update.
Strange that they dont release a "international" version when its easier to release this than a carrier specific firmware... I bought a nexus 6 because of the latest updates would get to a nexus phone, but however i was wrong. Even the LG G Flex2 i think the name was, has 5.1.1
I just flashed LMY47Z bootloader and radio zips in custom recovery and all is well
at&t here, running 5.1.1 aosp ROM
cam30era said:
Good question. Unfortunately, I don't know the answer. I fastboot flashed the factory image files.
Click to expand...
Click to collapse
I on at&t and have just gotten the over the air update to 5.1.1 build#lmy472 my 6 is from motorola.
jbstutes said:
I on at&t and have just gotten the over the air update to 5.1.1 build#lmy472 my 6 is from motorola.
Click to expand...
Click to collapse
That build is intended on being used by US. Celullar
Oniska said:
That build is intended on being used by US. Celullar
Click to expand...
Click to collapse
And, apparently, AT&T now.
Just flashed Android M. Works Good. will use it as my daily driver. Bye Lollipop
My N6 is still waiting 7.1.1 OTA, surprisingly, security patches come on schedule, but almost three months after release, OTA is not coming. Yes, I know I can sideload it, but one of the reasons I decided not to root it was not losing the ability of OTA updates.... any hint?
Thanks.
Pocket_rocket said:
My N6 is still waiting 7.1.1 OTA, surprisingly, security patches come on schedule, but almost three months after release, OTA is not coming. Yes, I know I can sideload it, but one of the reasons I decided not to root it was not losing the ability of OTA updates.... any hint?
Thanks.
Click to expand...
Click to collapse
You can flash the stock rom and you will receive OTA . Unlocking bootloader dosen't mean root.
You WILL receive OTA updates just do as follows
1. Unlock bootloader
2. Flash latest fastboot images
3. Lock bootloader - optional.
Make sure you don't keep TWRP recovery. It isn't that good for installing OTA packages via system update.
Please follow the guides if you don't know how to do them. Download the latest one named 7.1.1
Press thanks if i helped
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my iPhone using Tapatalk
kvk026 said:
1. Unlock bootloader
Click to expand...
Click to collapse
@Pocket_rocket Just a warning though... Unlocking your bootloader will wipe your device.
Use the full OTA image instead. I believe there's no need for an unlocked bootloader then.
https://developers.google.com/android/ota
Edit: a word of caution... If you decide to sideload the OTA, it's not a bad idea to keep your bootloader unlocked. If anything goes wrong along the way, you can then fix it.
And about the update issue. Are you on AT&T? They haven't approved 7.1.1 yet...
Edit 2 (I just woke up, gimme a break ): If you use Android Pay or anything else dependent on SafetyNet, you can't keep your bootloader unlocked (without further tinkering) since that triggers SN.
Didgeridoohan said:
@Pocket_rocket Just a warning though... Unlocking your bootloader will wipe your device.
Use the full OTA image instead. I believe there's no need for an unlocked bootloader then.
https://developers.google.com/android/ota
Edit: a word of caution... If you decide to sideload the OTA, it's not a bad idea to keep your bootloader unlocked. If anything goes wrong along the way, you can then fix it.
And about the update issue. Are you on AT&T? They haven't approved 7.1.1 yet...
Edit 2 (I just woke up, gimme a break ): If you use Android Pay or anything else dependent on SafetyNet, you can't keep your bootloader unlocked (without further tinkering) since that triggers SN.
Click to expand...
Click to collapse
Hi Didgeridoohan, Mine is now NBD92D (AT&T version and update thru OTA) but I don't see any AT&T logo on the back and my city(HK) does not have any AT&T service. Do you have any idea on this(Actually my Nexus 6 is from Australia).
In addition, if I keep sideload the OTA image N6F26U will cause any problem(except the Android Pay)? As you mention that Google does not approve any 7.1.1 AT&T version(Just tried to sideload N6F26U, it said can't install over a newer version).
Thanks so much in advance.
kvk026 said:
You can flash the stock rom and you will receive OTA . Unlocking bootloader dosen't mean root.
Click to expand...
Click to collapse
Yes, but I am too lazy to reconfigure my phone after wipe. Tons of apps, accounts, tweaks etc.
Didgeridoohan said:
And about the update issue. Are you on AT&T? They haven't approved 7.1.1 yet...
Click to expand...
Click to collapse
No. I'm on Vodafone (Spain) but I purchased this phone right on Amazon, so no pesky carrier should be acting as a man in the middle, I guess...
I mean, the phone runs decently well, but, given the fact that 7.1.1 will be the last update for this model, I want it. I wonder if is just a matter of patience or there is some other issue that is preventing my phone to get the OTA.
Thanks.
I have the same issue, m on NBD92D, which seems to ATT only, but there's no AT&T in India. I tried sideloading N6F26U, but it didn't work. Any idea how I can get 7.1, apart from waiting?
Sent from my Nexus 6 using XDA-Developers Legacy app
Has anyone got the update
No
No and the word from Huawei Canada support is there is no guarantee our version of the P20 Pro will get it.
Still haven't received any security updates since Sept update (8.1.0.120) on my CLT-L04 C792
Same here, have September 1, 2018 update... 8.1.0.120 with EMUI 8.1. From what I'm reading, seems to be around December 10, give or take a few days.
Honestly its going to take forever for these carriers to test and approve it. I would hedge my bets on January maybe February for the pie update.
What I did was rebrand my p20 pro (does cost a little money around 70-80$ cad) to CLT-L09 and on the November security patch if good software matters to you id spend the money, even though it is stupid to have to essentially pay to have access to the latest software.
matever said:
I would hedge my bets on January maybe February for the pie update.
Click to expand...
Click to collapse
I agree. Keep hearing people say they've heard/read starting Dec 10th or Dec 22nd etc.. but they can never provide any proof to back it up. It'll be next year I'm afraid fellas.
C605 have new update 9.0.0.161
Las beta was 9.0.0.112..i think is the final version
I did buy my P20 Pro from Hong Kong, not sure if that will make any difference?
Definitely. Mine is the CLT-L04 model which is intended for North America, including Canada, Mexico, and the U.S., not Hong Kong.
Rebranding P20 Pro
matever said:
Honestly its going to take forever for these carriers to test and approve it. I would hedge my bets on January maybe February for the pie update.
What I did was rebrand my p20 pro (does cost a little money around 70-80$ cad) to CLT-L09 and on the November security patch if good software matters to you id spend the money, even though it is stupid to have to essentially pay to have access to the latest software.
Click to expand...
Click to collapse
I thought about this but honestly I got extremely confused with the different rebranding versions out there. Can you tell me exactly what you rebranded to? Did you keep the region at C792 or change it to C432? And just out of curiosity why L09 and not L29? I thought L29 was the European version? Or am I just even more confused than I thought lol.
New from this morning (Canadian model)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Someone know if there is comaptible ROOT for P20 PRO 9.0 rom ?
firewaterfan said:
I thought about this but honestly I got extremely confused with the different rebranding versions out there. Can you tell me exactly what you rebranded to? Did you keep the region at C792 or change it to C432? And just out of curiosity why L09 and not L29? I thought L29 was the European version? Or am I just even more confused than I thought lol.
Click to expand...
Click to collapse
Honestly I spoke with the admin from ministryofsolutions and he said that the L09 and c432 was the fastest brand to get updates. Other than that I was probably just as confused as you were haha.
JohnAJivekat said:
New from this morning (Canadian model)
Click to expand...
Click to collapse
Haven't used this before - did a full download of the OTA package with no idea how to rename to install. Having said that I did run the firmware availability and it said that the firmware is not approved which I'm assuming means I'm going to get an error during the update. Probably because I'm still on locked bootloader it's looking for the carrier branded one.....?
firewaterfan said:
Haven't used this before - did a full download of the OTA package with no idea how to rename to install. Having said that I did run the firmware availability and it said that the firmware is not approved which I'm assuming means I'm going to get an error during the update. Probably because I'm still on locked bootloader it's looking for the carrier branded one.....?
Click to expand...
Click to collapse
I think we still need to wait a little more to see an OTA.
What provider is it ? And I don't know if we have differents build depending of the carrier.
Is the kernel the exact same version on your phone right now ?
Kernel: [email protected]#1 build on Mon Sept 3 12:03:42 CST 2018 ?
John A.
JohnAJivekat said:
I think we still need to wait a little more to see an OTA.
What provider is it ? And I don't know if we have differents build depending of the carrier.
Is the kernel the exact same version on your phone right now ?
Kernel: [email protected]#1 build on Mon Sept 3 12:03:42 CST 2018 ?
John A.
Click to expand...
Click to collapse
Yup same Kernel. Running 8.1.0.120 C792 with Koodo/Telus. Just had a chat with Ministry of Solutions he said $70 to provide bootloader unlock code and rebrand but I can do everything myself honestly with just the bootloader unlocked.
Get the "firmware is not approved" on my device too.
I have the Canadian too but am in the U.S. and there's no update here yet...
Wiggums said:
I have the Canadian too but am in the U.S. and there's no update here yet...
Click to expand...
Click to collapse
Hmm.. I'm in the US too on ATT. You're saying Pie doesn't show up on Firmware Finder for you?
Do you think this would work for updating a c792 to that 9.0 firmware?
https://forum.xda-developers.com/huawei-p20-pro/help/manual-update-root-unlocked-bootloader-t3836275
...use a USB stick like someone mentioned with the update files from FF?
Just noticed that there's a new version available. Has anybody been able to download it?
I have tried, but without success.
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G3991/g1755/v243403/f1/full/changelog.xml
http://update.hicloud.com:8180/TDS/data/files/p3/s15/G3991/g1755/v243403/f1/full/changelog.xml
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I have downloaded it. Asap i will try to install
wetito said:
I have downloaded it. Asap i will try to install
Click to expand...
Click to collapse
Can you share how did you do it?
You had to use firmware finder for pc
wetito said:
You had to use firmware finder for pc
Click to expand...
Click to collapse
What is ur phone varient? did u manage to update ur phone? what are the new features?
How to install it. I already downloaded it
Don't try to install it, it's a Chinese only version. It's the quickest way to brick your device.
hacktrix2006 said:
Don't try to install it, it's a Chinese only version. It's the quickest way to brick your device.
Click to expand...
Click to collapse
It's not the truth
wetito said:
It's not the truth
Click to expand...
Click to collapse
The Beta is normally sent to China based users or India, Yes it shows up on FF however if you ran a check it states its no ready for the phone just like B144 does currently, I am glad your running Android 9.0 EMUI 9.1 on your phone however you took a risk and a very big one at that.
Hence my statement above as so other don't go nuts and then come on here like it has been recently with "I have bricked my Honor 9 Lite HEELLLLLLLLLPPPPPPPPPP!".
If and when its offered via FF as safe or via the Honor Beta FTA will i even think about installing it.
Also another thing, if you hate EMUI 9.1, how are you going to roll back your device it needs a special firmware (Which yes does show on FF i know, but its the Chinese firmware yet again).
So rather coming out and going its not the truth maybe think why it was said in the first place!
The official beta is available via the Huawei beta app
vayavalla said:
The official beta is available via the Huawei beta app
Click to expand...
Click to collapse
Not to everyone though. That's my point. Each country has different frequencies for the modem etc. Hence what I was saying above.
Sent from my LLD-L31 using Tapatalk
hacktrix2006 said:
Not to everyone though. That's my point. Each country has different frequencies for the modem etc. Hence what I was saying above.
Sent from my LLD-L31 using Tapatalk
Click to expand...
Click to collapse
Of course. That's a beta also. Whoever wants to try it, must know that is not for everyone.
get official update who has updated with hurupdater from oreo to foot from twrp?
my revision is LLD-LGRP2-OVS 9.1.106 (log)
As of 24 June 2019, there are issues with EMUI 9 update(Build number:9.1.0.112)
Issues:
Wifi connectivity issue.
Performance issue.
Now you have to hold the power button for 7 seconds for the power menu to pop up.
More bloatwares and background services.
Frank_70 said:
get official update who has updated with hurupdater from oreo to foot from twrp?
my revision is LLD-LGRP2-OVS 9.1.106 (log)
Click to expand...
Click to collapse
Congrats you have killed any chance of going back to EMU 8.0 Android 8 lol.
Sent from my LLD-L31 using Tapatalk
My sim free UK Honor 9 lite has just (25.06.19) "over night" updated to EMUI 9.1.0, build 9.1.0.117(C432E4R1P3). so the updates are coming guys.
CarsnGadgets said:
My sim free UK Honor 9 lite has just (25.06.19) "over night" updated to EMUI 9.1.0, build 9.1.0.117(C432E4R1P3). so the updates are coming guys.
Click to expand...
Click to collapse
I am on same build as well, got it last week and I am in UK on simfree too.
Sent from my LLD-L31 using Tapatalk
hacktrix2006 said:
I am on same build as well, got it last week and I am in UK on simfree too.
Sent from my LLD-L31 using Tapatalk
Click to expand...
Click to collapse
I got the same build this week
Just got Pie and EMUI9.1 in Czech Republic
edit: I running without FR three days and so far no problems... didnt have time.
Sent from my Samsung SM-G973F using XDA Labs
rmn.br said:
Just got Pie and EMUI9.1 in Czech Republic
Click to expand...
Click to collapse
I got the same build about two weeks ago. My phone started acting weird after updating to pie.
It started rebooting itself and stuff like that. I hope they fix this on upcoming updates though.
Good news friends!
Android 10 released for our device, available via OTA and also on SamMobile.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
No hong kong version TGY
REDOTHELLO said:
No hong kong version TGY
Click to expand...
Click to collapse
no
Only Chile, Brazil, Peru and Panama for now.
I just got it on TPA CSC.
Mexico has received it also.
aromerblz said:
I just got it on TPA CSC.
Mexico has received it also.
Click to expand...
Click to collapse
Are you in North America?
Sent from my SM-N9600 using Tapatalk
zimplemeh said:
Are you in North America?
Click to expand...
Click to collapse
Am not, but does not matter so long I have the CSC for the firmware that is seeding. In my case TPA.
aromerblz said:
I just got it on TPA CSC.
Mexico has received it also.
Click to expand...
Click to collapse
Does that firmware have call recording?
Sent from my SM-N9600 using Tapatalk
livystewy01 said:
Does that firmware have call recording?
Click to expand...
Click to collapse
AFAIK it does not. It is based on CSC as well.
aromerblz said:
AFAIK it does not. It is based on CSC as well.
Click to expand...
Click to collapse
Is MXO for Mexico?
Sent from my SM-N9600 using Tapatalk
In chile not.. i am not update my note 9
Nothing yet for New Zealand.
zimplemeh said:
Is MXO for Mexico?
Click to expand...
Click to collapse
That is the Mexico unlocked device.
aromerblz said:
That is the Mexico unlocked device.
Click to expand...
Click to collapse
Thank you!
Sent from my SM-N9600 using Tapatalk
Which one?
What's the best unlocked ROM so far?
Panama, Ecuador, Paraguay, Bolivia, Trinidad and Togabo, Colombia, Chile, Brazil, Peru and "UNKNOWN".
Any reason to prefer any specific region?
it is too late
when android 10 will be released for SM-N9600 Hong Kong version !
I have one of these TGY (from Hongkong) N9600 devices... It is still stuck on the Dec security patch, NOT sure if Android 10 will ever make it. All updates so far have been slow.
I use the device mainly because I need to maintain 2 different phone numbers, so the dual-sim helps. But using it on AT&T postpaid, the service sucks... NOT to hijack this thread but I can't seem to pull anything above 25MBPS or push above 2MBPS, NO matter where I am. My wife's iPhone is easily able to download at 100+MBPS. May be it is time to jump over to the dark side (?)
how root n9600 android Q？
maxie.maverick said:
I have one of these TGY (from Hongkong) N9600 devices... It is still stuck on the Dec security patch, NOT sure if Android 10 will ever make it. All updates so far have been slow.
I use the device mainly because I need to maintain 2 different phone numbers, so the dual-sim helps. But using it on AT&T postpaid, the service sucks... NOT to hijack this thread but I can't seem to pull anything above 25MBPS or push above 2MBPS, NO matter where I am. My wife's iPhone is easily able to download at 100+MBPS. May be it is time to jump over to the dark side (?)
Click to expand...
Click to collapse
You check, just got an android 10 update for Samsung Galaxy 9600 Hongkong.
ect_hd2 said:
You check, just got an android 10 update for Samsung Galaxy 9600 Hongkong.
Click to expand...
Click to collapse
Yeah, got the update but the battery life sucks now... I wonder if changing the CSC would help with the problems I reported above...
BTW, the internal memory on my Note-9 is encrypted... After the android 10 update, the start-up screen is in Chinese. Anyone else seeing this? How do I change this to English? After entering my pin & successfully booting up, everything else is in English as expected. So it is just the start-up screen...
Help appreciated. Thanks