Related
Just received my unlocked note 8 from samsung. Was going to flash t mobile firmware on it but I want to make sure I have stock files in case I want to revert. I can find XAA and a few others but not BAX. My full model.number is SM N950U1ZBAX. us unlocked purchased from samsung
I did NOT find it on sammobile.com
black96ss said:
Just received my unlocked note 8 from samsung. Was going to flash t mobile firmware on it but I want to make sure I have stock files in case I want to revert. I can find XAA and a few others but not BAX. My full model.number is SM N950U1ZBAX. us unlocked purchased from samsung
I did NOT find it on sammobile.com
Click to expand...
Click to collapse
I'll try to find...but may have to wait until released as this is a new release model...
BlueFox721 said:
I'll try to find...but may have to wait until released as this is a new release model...
Click to expand...
Click to collapse
I went into the bootloader and it actually has the XAA...not sure why the box says difference but it would make sense to why I cant find it lol because its XAA
If you get an update notification you can get the url of the update by following this:
https://www.androidsage.com/2016/01/21/how-to-capture-ota-update-url-for-your-android-device/
This would allow you to share the update or Odin files if you find any...
---------- Post added at 01:18 AM ---------- Previous post was at 01:17 AM ----------
black96ss said:
I went into the bootloader and it actually has the XAA...not sure why the box says difference but it would make sense to why I cant find it lol because its XAA
Click to expand...
Click to collapse
What baseband?
BlueFox721 said:
If you get an update notification you can get the url of the update by following this:
https://www.androidsage.com/2016/01/21/how-to-capture-ota-update-url-for-your-android-device/
This would allow you to share the update or Odin files if you find any...
---------- Post added at 01:18 AM ---------- Previous post was at 01:17 AM ----------
What baseband?
Click to expand...
Click to collapse
base band N950U10YM1AQI5
black96ss said:
base band N950U10YM1AQI5
Click to expand...
Click to collapse
You are good with the files I have posted for xaa...keep watching for the updates...I may or may not get them before released...if I do I'll post them
Just got the phone, unlocked it, works fine on T-Mobile, but I was wondering if we can debrand this or rebrand to another carrier like most G9xxU phones out there. I know this is a P and probably isn't simple, but has anyone tried yet?
matistight said:
Just got the phone, unlocked it, works fine on T-Mobile, but I was wondering if we can debrand this or rebrand to another carrier like most G9xxU phones out there. I know this is a P and probably isn't simple, but has anyone tried yet?
Click to expand...
Click to collapse
what csc are available on your device/firmware? for example my N976V has VZW and GCF.. i switched to gcf and its basically unbranded.. at least in my case..
problem with the carrier specific models they might have slightly dif capabilities such as network so putting csc on that doesnt go with the device might not work right
elliwigy said:
what csc are available on your device/firmware? for example my N976V has VZW and GCF.. i switched to gcf and its basically unbranded.. at least in my case..
problem with the carrier specific models they might have slightly dif capabilities such as network so putting csc on that doesnt go with the device might not work right
Click to expand...
Click to collapse
Hi. how do you switch the N976V VZW CSC to GCF ? thanks
matistight said:
Just got the phone, unlocked it, works fine on T-Mobile, but I was wondering if we can debrand this or rebrand to another carrier like most G9xxU phones out there. I know this is a P and probably isn't simple, but has anyone tried yet?
Click to expand...
Click to collapse
How did you unlock it
phonex168 said:
Hi. how do you switch the N976V VZW CSC to GCF ? thanks
Click to expand...
Click to collapse
its a procees and files n methods are not public but essentially once u can enable keystrings and hiddenmenu on vzw can use *#272*IMEI# to change it.. with root theres many many ways
heres a pic of the menu on my n976v
How do you unlock the sprint s10 5g to use in another carrier or boost?
How do you unlock the SM-G977p to use on another carrier or boost?
matistight said:
Just got the phone, unlocked it, works fine on T-Mobile, but I was wondering if we can debrand this or rebrand to another carrier like most G9xxU phones out there. I know this is a P and probably isn't simple, but has anyone tried yet?
Click to expand...
Click to collapse
IMEIgurus unlocked it for me
elliwigy said:
heres a pic of the menu on my n976v
Click to expand...
Click to collapse
Does this reset the phone?
---------- Post added at 11:58 PM ---------- Previous post was at 11:57 PM ----------
elliwigy said:
its a procees and files n methods are not public but essentially once u can enable keystrings and hiddenmenu on vzw can use *#272*IMEI# to change it.. with root theres many many ways
Click to expand...
Click to collapse
Also is this a combination firmware?
Altair571 said:
Does this reset the phone?
---------- Post added at 11:58 PM ---------- Previous post was at 11:57 PM ----------
Also is this a combination firmware?
Click to expand...
Click to collapse
it prolly will wipe data unless maybe u just update network code.. and thats stock firmware
Flashed tmobile firmware on sprint s10 5g
I successfully flashed tmobile firmware on a sm-g977p sprint using the patched odin.
jaybirdroid66 said:
I successfully flashed tmobile firmware on a sm-g977p sprint using the patched odin.
Click to expand...
Click to collapse
really? i assume this was after you unlocked the BL?
No, I cannot get the unlock oem boot loader button to pop up. Unless it was there before I flashed and it was unbeknownst to me opened.
---------- Post added at 03:18 AM ---------- Previous post was at 03:17 AM ----------
But really, yes
jaybirdroid66 said:
No, I cannot get the unlock oem boot loader button to pop up. Unless it was there before I flashed and it was unbeknownst to me opened.
---------- Post added at 03:18 AM ---------- Previous post was at 03:17 AM ----------
But really, yes
Click to expand...
Click to collapse
confused lol.. so bl was unlocked yes or no? just curious cuz maybe my n976v is similar lol
Boot was locked
jaybirdroid66 said:
Boot was locked
Click to expand...
Click to collapse
so u took full tmo firmware for a g975u and flashed it to g977p without unlocking the bl or anything?
can u take a pic of ur about phone and software info and post it so i can see what its reading as?
this is very interesting since it would mean that the regular U versions are signed with same keys as the 5g sprint version which is unlockable.
also, did u flash everything? BL AP CP CSC etc?
I flashed the G977tuvs2ash_8_tmb_[www.unlockguy.ca]. I have since paid my sprint bill, refreshed the sprint firmware, and it is good as new, with the OEM unlock button now showing up. You want me to try it again without enabling oem unlock and see what happens?
---------- Post added at 12:37 AM ---------- Previous post was at 12:37 AM ----------
Reflashed not refreshed
jaybirdroid66 said:
I flashed the G977tuvs2ash_8_tmb_[www.unlockguy.ca]. I have since paid my sprint bill, refreshed the sprint firmware, and it is good as new, with the OEM unlock button now showing up. You want me to try it again without enabling oem unlock and see what happens?
---------- Post added at 12:37 AM ---------- Previous post was at 12:37 AM ----------
Reflashed not refreshed
Click to expand...
Click to collapse
so g977t firm works on g977p.. interesting..i havent found any firmware yet that works on my n976v except vzw firm lol
Well it has only just been released, and verizon is notorious for their security
So can someone summarize what can be bootloader unlocked? Not sure why there is no thread dedicated for this, maybe it wouldn't be asked 1,000 times over and over.
SM-G977P: Sprint 5G, can be bootloader unlocked like Exynos and other Android phones easily and rooted.
SM-G977T: TMobile 5G....????
SM-G977U: Verizon 5G, not unlockable or flashable?
SM-G977N (Exynos): ?
I just upgraded to the note8 N950U and I've been browsing the forums and flashing seems more involved than previous phones.
What is the simplest process to root and then flash custom roms?
Links are fine.
Thanks everyone.
treams said:
I just upgraded to the note8 N950U and I've been browsing the forums and flashing seems more involved than previous phones.
What is the simplest process to root and then flash custom roms?
Links are fine.
Thanks everyone.
Click to expand...
Click to collapse
That is the US version? If so development is very, very limited due to the locked bootloader.
https://forum.xda-developers.com/galaxy-note-8/development/root-t394240
Your not giving much info. What version of Android are you on? Just posting you upgraded to the Note 8 doesn't say much for anyone that can try to help you.
Sent from my SM-N975U using Tapatalk
---------- Post added at 10:57 PM ---------- Previous post was at 10:55 PM ----------
If you got lucky and found a Note 8 still on revision 1, 2, or 3 bootloader you can use Samfail to root.
Sent from my SM-N975U using Tapatalk
I'm on nougat and according to my baseband v7 bootloader.
treams said:
I'm on nougat and according to my baseband v7 bootloader.
Click to expand...
Click to collapse
I stand to be corrected but I don't think you can have any form of root/custom roms with bootloader 7
Information you seek is available by reading the forum. Happy modding
I have searched these forums but have not been able to find an answer to my questions.
I recently bought a Sprint N960U unlocked in Canada. I am using a Rogers SIM and it's working but I am stuck on Android 9 Nov2019 firmware.
I want to update to Android 10 using Odin. I have a few questions
From reading these forums I understand I can flash any snapdragon firmware. is that correct? I am planning on installing the sprint firmware just to be safe
Will flashing a new firmware lock my phone (I don't know how the phone was unlocked originally)
I am planning on using the instructions from Sammobile to flash the firmware. Anything else I need to be aware off
I suppose you can do a CSC reset by *#272*IMEI#
Select Rogers or XAC for fully unlocked. This will wipe off your phone though.
Hi, I am now having the exact same situation as yours. The new Note 9 with Sprint stucks on Andriod 9. How did you resolve the issue? Thanks.
Have you checked with Sprint that they show the phone as being unlocked?
Sent from my SM-N960U1 using Tapatalk
---------- Post added at 02:03 PM ---------- Previous post was at 02:02 PM ----------
Fully unlocked
Sent from my SM-N960U1 using Tapatalk
Hello, I have an unrooted and unlocked AT&T SM-N950U that hasn't received updates since September 1st 2018
When I tried in the past to check for updates it always told me the phone already has the latest update but it's been like that for 2 years already and I know there have been new updates...
It is still on android version 8.0.0 with Build number: R16NW.N950USQS5CRI4
I wanted to update to the latest recommended ROM because I am worried about the state of security on the phone. Lately I noticed app started to install themselves from nowhere and I am worried the phone might already be infested with viruses undetected by security softwares.
How should I upgrade the ROM? Any help, hint or recommendation would be very appreciated!
Thank you! :fingers-crossed:
Downloaded the firmware from Frija or Sammobile..download correct version of odin..extract the firmware you downloaded leaving you with files AP..BL..CP..CSC..HOME_CSC
OPEN ODIN..boot device to download mode..plug in to computer. Odin will recognize device. Load BL file in BL spot..AP file in AP slot and so on. If you want complete wipe load csc..if not use Home_csc..click start wait till Odin says pass..DONE!
Sent from my SM-N986U using Tapatalk
butchieboy said:
Downloaded the firmware from Frija or Sammobile..download correct version of odin..extract the firmware you downloaded leaving you with files AP..BL..CP..CSC..HOME_CSC
OPEN ODIN..boot device to download mode..plug in to computer. Odin will recognize device. Load BL file in BL spot..AP file in AP slot and so on. If you want complete wipe load csc..if not use Home_csc..click start wait till Odin says pass..DONE!
Sent from my SM-N986U using Tapatalk
Click to expand...
Click to collapse
Thank you! I looked at Sammobile in the past but wasn't sure if the ROMs there were safe because it's not the official Samsung website but it does look pretty legit
also I wasn't sure which ROM I should download from there since there are so many options
https://www.sammobile.com/samsung/firmware/SM-n950u/
Do I need the reqular USA one? What about the Verizon/T-mobile/Spint/CDMA/Comcast versions? There is no specific specialized version for AT&T?
Thanks again!
You can flash any of them they are all the same. They will provision to whatever sim you have
Sent from my SM-N986U using Tapatalk
butchieboy said:
You can flash any of them they are all the same. They will provision to whatever sim you have
Sent from my SM-N986U using Tapatalk
Click to expand...
Click to collapse
One last question I forgot to ask! Will updating the firmware this way delete my data, files and contacts on the device? Should I look for a way to back it up?
Thank you so much butchieboy
If you put HOME_CSC in csc spot it will not wipe your data, but just using csc will
Sent from my SM-N986U using Tapatalk
butchieboy said:
If you put HOME_CSC in csc spot it will not wipe your data, but just using csc will
Sent from my SM-N986U using Tapatalk
Click to expand...
Click to collapse
Ok, so I went ahead and tried to flash it using Odin, but I keep getting an error, after it hangs for a while during connection process.
<ID:0/008> SetupConnection..
<ID:0/008> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Maybe the cable is faulty? Why doesn't it want to connect?
Edit:
I came across this Reddit post:
https://www.reddit.com/r/GalaxyNote8/comments/890plg/samfirm_odin_usage_guide/
Go back to the log tab and click "start" in the bottom right corner. DO NOT UNPLUG YOUR PHONE UNTIL ODIN SAYS "PASS."
For Oreo on USA models, only Xfinity, US Cellular and T-Mobile firmware can be downloaded via Samfirm. Sprint's will be coming soon, but the only way to get Verizon and AT&T firmware is by updating your phone to Oreo via Smart Switch. If someone can update their VZW/ATT phone via Smart Switch and send me the files I can upload and add them here.
Click to expand...
Click to collapse
According to step #8 in his instructions
Apparently The only way to update an AT&T firmware is by updating the phone to Oreo via something called "Smart Switch". This is what google brought up
https://www.samsung.com/us/support/owners/app/smart-switch
Currently installing and trying it.
Edit2:
Just tried "Smart Switch" and I found out it's not that "smart" after all... It also told me I'm on the latest version..
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Edit 3:
Found this link that seems to be for AT&T note 8 but the model number is a little bit different "SM-N950U1" with that added "1" at the end.
https://www.sammobile.com/samsung/g...SM-N950U1/ATT/download/N950U1UES8DTG2/359209/
At&t does not post U firmware. U1 is unlocked firmware. Just download any version of U firmware. USC..CCT.. all are the same. You should be flashing firmware that is S7 or U7. This will update to Pie and there is no flashing backward. Try a different USB port. Whatever version you select make sure to use correct Odin. Use the files that I told you previously...BL..AP..CP..CSC you will get there. Its very easy.
Sent from my SM-N986U using Tapatalk
---------- Post added at 04:20 PM ---------- Previous post was at 04:19 PM ----------
And no Smartswitch is not the only way to update. Odin works great. Let my check firmware science
Sent from my SM-N986U using Tapatalk
---------- Post added at 04:26 PM ---------- Previous post was at 04:20 PM ----------
Odin should work. Only try this to get back on track if Odin doesn't work.. this is not the latest firmware but maybe flash this then try to see if Ota will kick in... Just remember once you update your bootloader, you can't downgrade firmware.. so if your bootloader is S5 or U5 you can't go back to S4 or U4. You can only go up or flash firmware that has same bootloader. Download it. Move to SD card. Boot to stock recovery..look for update.zip..Highlight it..flash. Do not extract. This is a zip that you flash in stock recovery. Go to Firmware Science and read the directions before flashing.
https://firmware.science/update/SS-N950USQS5CRI4-to-U5CRIA-UP
Sent from my SM-N986U using Tapatalk
butchieboy said:
At&t does not post U firmware. U1 is unlocked firmware. Just download any version of U firmware. USC..CCT.. all are the same. You should be flashing firmware that is S7 or U7. This will update to Pie and there is no flashing backward. Try a different USB port. Whatever version you select make sure to use correct Odin. Use the files that I told you previously...BL..AP..CP..CSC you will get there. Its very easy.
Sent from my SM-N986U using Tapatalk
---------- Post added at 04:20 PM ---------- Previous post was at 04:19 PM ----------
And no Smartswitch is not the only way to update. Odin works great. Let my check firmware science
Sent from my SM-N986U using Tapatalk
---------- Post added at 04:26 PM ---------- Previous post was at 04:20 PM ----------
Odin should work. Only try this to get back on track if Odin doesn't work.. this is not the latest firmware but maybe flash this then try to see if Ota will kick in... Just remember once you update your bootloader, you can't downgrade firmware.. so if your bootloader is S5 or U5 you can't go back to S4 or U4. You can only go up or flash firmware that has same bootloader. Download it. Move to SD card. Boot to stock recovery..look for update.zip..Highlight it..flash. Do not extract. This is a zip that you flash in stock recovery. Go to Firmware Science and read the directions before flashing.
https://firmware.science/update/SS-N950USQS5CRI4-to-U5CRIA-UP
Sent from my SM-N986U using Tapatalk
Click to expand...
Click to collapse
Ok so I did manage to flash using the N950USQS5CRI4 from firmware.science but it ended up deleting all my personal files and doing a clean install.. Very unfortunate but I'll live with it.
Following the firmware.science instructions I now realize why my previous attempts with Odin didn't work... I had to put the device into download mode... I feel so stupid for not realizing this earlier I could have saved all my data.
That is why I suggested you read the instructions. Sorry I wasn't a little more clear. And yes whenever you use Odin you have to put device in download mode, I just assumed you knew that.
Sent from my SM-N975U using Tapatalk
---------- Post added at 05:40 AM ---------- Previous post was at 05:38 AM ----------
See if you can ota now. If not download the last firmware and flash in odin.
Sent from my SM-N975U using Tapatalk
butchieboy said:
That is why I suggested you read the instructions. Sorry I wasn't a little more clear. And yes whenever you use Odin you have to put device in download mode, I just assumed you knew that.
Sent from my SM-N975U using Tapatalk
---------- Post added at 05:40 AM ---------- Previous post was at 05:38 AM ----------
See if you can ota now. If not download the last firmware and flash in odin.
Sent from my SM-N975U using Tapatalk
Click to expand...
Click to collapse
It's ok it was a risk I was willing to take I knew something could go wrong but most of the really important stuff to me is already backed up automatically I lost a few notes and photos and images, videos I collected but really not that big of a deal. My really important stuff are on my PC
I did manage to flash the latest firmware with Odin.
Crossing fingers that hopefully it will take care of those pesky game apps that kept installing themselves because that was one of the main reason I wanted to update in the first place lol
If you have At&t sim, you will get the games. Most you can Uninstall. If you have Package Disabler use that to disable the apps you don't want. Be careful not to disable system apps
Sent from my SM-N975U using Tapatalk
butchieboy said:
If you have At&t sim, you will get the games. Most you can Uninstall. If you have Package Disabler use that to disable the apps you don't want. Be careful not to disable system apps
Sent from my SM-N975U using Tapatalk
Click to expand...
Click to collapse
No at&t sim for me.
You know now that you mention at&t I am actually confused about that... I thought flashing a new firmware would remove all the at&t bloatware I don't need. Where are they coming from? Are they included inside the USC firmware? How can I get a cleaner firmware for the note 8?
https://www.sammobile.com/samsung/galaxy-note-8/firmware/SM-N950U/USC/download/N950USQS8DTG2/360392/
What sim do you have? Is the device At&t..Tmobile??? The only way to reduce bloat is flashing U1 firmware. You have U device carrier locked U1 is unbranded
Sent from my SM-N975U using Tapatalk
---------- Post added at 07:23 AM ---------- Previous post was at 07:22 AM ----------
As I stated, the firmware USC..TMO..CCT are all the same. They provision to the sim you are using.
Sent from my SM-N975U using Tapatalk
---------- Post added at 07:36 AM ---------- Previous post was at 07:23 AM ----------
Your topic header says How to update At&t firmware, but you say you don't have At&t sim. I'm a bit confused. I will sum all this up..
All the carrier locked firmware is the same..meaning U firmware. You can flash any of them. The firmware will provision to the sim you have. The problem with that is I am now confused as to what carrier you have since you said you don't have an At&t sim. In order to get ota, you will need to be on the latest firmware of the carrier you have. If At&t is on a certain build and you flash firmware that At&t is not currently on you will not get ota.
The U1 firmware is unbranded. Flashing this you will not get all the bloat that comes with U firmware. This is why its important to read up on the basics of using Odin, knowing your firmware version..bootloader..and so on. Give as much info as you can about the device when asking for help, it will save a ton of time. And to add there are a ton of people willing to help but having the basic info about what device you have is key so all trying to help can direct you accordingly. Don't take this as me being a jerk..lol I'm just trying to save you some time[emoji106]
Sent from my SM-N986U using Tapatalk
butchieboy said:
What sim do you have? Is the device At&t..Tmobile??? The only way to reduce bloat is flashing U1 firmware. You have U device carrier locked U1 is unbranded
Sent from my SM-N975U using Tapatalk
---------- Post added at 07:23 AM ---------- Previous post was at 07:22 AM ----------
As I stated, the firmware USC..TMO..CCT are all the same. They provision to the sim you are using.
Sent from my SM-N975U using Tapatalk
---------- Post added at 07:36 AM ---------- Previous post was at 07:23 AM ----------
Your topic header says How to update At&t firmware, but you say you don't have At&t sim. I'm a bit confused. I will sum all this up..
All the carrier locked firmware is the same..meaning U firmware. You can flash any of them. The firmware will provision to the sim you have. The problem with that is I am now confused as to what carrier you have since you said you don't have an At&t sim. In order to get ota, you will need to be on the latest firmware of the carrier you have. If At&t is on a certain build and you flash firmware that At&t is not currently on you will not get ota.
The U1 firmware is unbranded. Flashing this you will not get all the bloat that comes with U firmware. This is why its important to read up on the basics of using Odin, knowing your firmware version..bootloader..and so on. Give as much info as you can about the device when asking for help, it will save a ton of time. And to add there are a ton of people willing to help but having the basic info about what device you have is key so all trying to help can direct you accordingly. Don't take this as me being a jerk..lol I'm just trying to save you some time[emoji106]
Sent from my SM-N986U using Tapatalk
Click to expand...
Click to collapse
Nah I totally understand where you are coming from. I don't think you are a jerk at all.
It's an at&t device I bought 2 years ago in the US but I am outside of the US and have a completely different sim from a local company. Therefore I don't use any of at&t's services
Initially I thought I could only update to a firmware that was specifically made for an at&t device or if I want a clean install I could install some custom firmware but it might be buggy and not support all the note features. But now thanks to you I am starting to understand it all better now.
Have to be rooted to install custom Rom. And since your bootloader is past revision 3 the older root method does not work. But Extreme Syndicate root method does. But since you are not in United States not sure what carrier you are using. And if your not familiar with the root method it could be a little difficult...But not if you read up. The developer Elliwigy is a beast.
SM-N950U Extreme Syndicate Root
butchieboy said:
Have to be rooted to install custom Rom. And since your bootloader is past revision 3 the older root method does not work. But Extreme Syndicate root method does. But since you are not in United States not sure what carrier you are using. And if your not familiar with the root method it could be a little difficult...But not if you read up. The developer Elliwigy is a beast.
SM-N950U Extreme Syndicate Root
Click to expand...
Click to collapse
Thank you so much for all your patience and information!
It's ok I don't need root on this phone. I have really basic usage with it. I can also live with the at&t bloatware it never really bothered me in the past but since I already made a clean install I thought maybe there's an easy and quick way to get rid of it.
You say I could install the U1 version using Odin without any issues? based on what I read and understood about the numbers and letters the U1 seems like an Exynos firmware
https://www.sammobile.com/samsung/g...SM-N950U1/TMK/download/N950U1UES8DTG2/360205/
N950U1UES8DTG2
UE = Exynos
SQ = Snapdragon
I have the Snapdragon model
You have to understand the model numbers and build numbers. U1 is not international.
950U-carrier locked
950U1- unlocked
950F-international
Sent from my SM-N986U using Tapatalk
---------- Post added at 07:46 PM ---------- Previous post was at 07:40 PM ----------
Your looking at the wrong characters in build number
Sent from my SM-N986U using Tapatalk
---------- Post added at 07:50 PM ---------- Previous post was at 07:46 PM ----------
S8DTG2..
S=security update
8=bootloader version
You have an At&t device. Only worry about United States Snapdragon firmware. Att..Tmobile..USC..Verizon..Xfinity..Comcast. you need to understand the firmware versions. When you are searching firmware in Sammobile, type in SM-N950U1 if you want unlocked firmware. If you want the carrier locked type in SM-N950U. Not sure where your getting the UE from
Sent from my SM-N986U using Tapatalk
butchieboy said:
You have to understand the model numbers and build numbers. U1 is not international.
950U-carrier locked
950U1- unlocked
950F-international
Sent from my SM-N986U using Tapatalk
---------- Post added at 07:46 PM ---------- Previous post was at 07:40 PM ----------
Your looking at the wrong characters in build number
Sent from my SM-N986U using Tapatalk
---------- Post added at 07:50 PM ---------- Previous post was at 07:46 PM ----------
S8DTG2..
S=security update
8=bootloader version
You have an At&t device. Only worry about United States Snapdragon firmware. Att..Tmobile..USC..Verizon..Xfinity..Comcast. you need to understand the firmware versions. When you are searching firmware in Sammobile, type in SM-N950U1 if you want unlocked firmware. If you want the carrier locked type in SM-N950U. Not sure where your getting the UE from
Sent from my SM-N986U using Tapatalk
Click to expand...
Click to collapse
I read this post by user Kangi26
https://forum.xda-developers.com/att-galaxy-note-8/how-to/att-oreo-ota-updates-t3756025
There he made the following assertion:
Understanding the Firmware labels
I got a better, more updated explanation to how these are broken down
N=Note
950U or F etc, the model of device
SQ, FX etc = CPU and model specific
U,S,E = Update, Security, Engineering, respectively
1,2,3,4,5 etc = bootloader rev(this is important!)
A,B,C,D = Nougat rev 1, Nougat rev 2, Oreo rev 1, Pie rev 1
If you ever see a build that contains a "Z" such as this: U5ZSA1, that means the build is part of Samsung's Official Beta program. The "Z" in this context replaces the Android Version letter thus obscuring what OS it actually is.
P,Q,R,S = Year (R is 2018, S is 2019)
A,B,C etc = month (January A - December L)
1 - 9 and then A - Z =build compilation. This basically means how many builds there are in a month. They start at 1 and go to Z (Ex. If a build is U5CRK4 then that is the fourth build of the month of November)
So N950USQS5CRK1 would be
N950-U-SQ-S-5-C-R-K-1
N950U (Note 8 Carrier version), SQ (Snapdragon), S (Security), 5 (Bootloader version), C (Build Oreo), R (2018), K (November), 1 (1st build)
Click to expand...
Click to collapse
So I deducted and figured if SQ after the first U meant Snapdragon, anything else at this position would probably mean Exynos.
So when I saw the following firmware with this label N950U1UES8DTG2 I thought it most be for Exynos:
https://www.sammobile.com/samsung/g...SM-N950U1/TMK/download/N950U1UES8DTG2/360205/
Again only be concerned with 950U or 950U1
Sent from my SM-N986U using Tapatalk