Database Develop

[ROM] [7.1.2] AOSP CAF (LA.UM.5.8.r1) [POLLUX/POLLUX_WINDY]

AOSP-CAF for Xperia Tablet Z​
This is a builds for Xperia Tablet Z LTE/Wi-Fi.
About ROM
AOSP-CAF Rom is based on AOSP. It offers powerful performance with good battery backup and OMS7 support.
Code Aurora Forum (CAF) is a consortium of companies with projects serving the mobile wireless industry. Software projects it concerns itself with are e.g. Android for MSM, Femto Linux Project, LLVM, MSM WLAN and Linux-MSM. Code Aurora is basically AOSP plus all Qualcomm specific enhancements and optimization.
Installation
Download the latest build
Place ROM in your SD card or Internal Storage
Reboot into recovery mode
Full wipe and factory reset (recommended)
Flash ROM
Reboot
Downloads
Pollux: AFH
Pollux_windy: AFH​Recommended Recovery (optional)
TWRP 3.1
Pollux: https://dl.twrp.me/pollux
Pollux_windy: https://dl.twrp.me/pollux_windy​Gapps (optional)
OpenGapps (ARM/Android-7.1): http://opengapps.org
Information: Flash the GApps after the first boot and setup.​Sources
AOSP-CAF on Github
Kernel: apq8064​
Features:
Enabled Calls/SMS for Pollux only
Increased sound volume
Xperia framework permissions for install Sony's apps
TWRP Integrated
XDA:DevDB Information
AOSP CAF, ROM for the Sony Xperia Tablet Z
Contributors
CaHbKaUp, Men_in_black007
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.4.x
Based On: AOSP
Version Information
Status: Testing
Beta Release Date: 2017-08-26
Created 2017-05-10
Last Updated 2017-09-28

Reserved

I cannot find root management in developer settings, do I have to flash su?

botsaris said:
I cannot find root management in developer settings, do I have to flash su?
Click to expand...
Click to collapse
Yes, you should flash SuperSU separately.

Hi,
I have got an error when install GApps- Open_gapps-arm-7.1-nano-20170521.zip
"ERROR 64: Wrong architecture to set-up Open GApps pre-bundlet busybox"
Any clue what I have to do?
Regards, thanks for your work for this excellent tablet
Edit
I cannot go back too LineageOS14.1 either. I get an error
"Can't install this package over new build"
Please help me to make my tablet working again. please

mirek54 said:
Hi,
I have got an error when install GApps- Open_gapps-arm-7.1-nano-20170521.zip
"ERROR 64: Wrong architecture to set-up Open GApps pre-bundlet busybox"
Any clue what I have to do?
Regards, thanks for your work for this excellent tablet
Edit
I cannot go back too LineageOS14.1 either. I get an error
"Can't install this package over new build"
Please help me to make my tablet working again. please
Click to expand...
Click to collapse
Seems you select wrong architecture when download gapps.
Before flash LineageOS, first flash boot.img and then boot into TWRP from this kernel or simply wipe system partition.

I have TWRP 3.1.0-0 installed. I have followed tutorials https://forum.xda-developers.com/xp...de-tutorial-sony-xperia-tablet-z-lte-t3392831
Pos. 8)-10).
and have tried to install GApps arm, 7.1
Why I cannot install back Lineage 14.1?
Btw
AOSP CAF (LA.UM.5.7.r1) is working correctly but I am missing GApps.
Edit
It is something wrong with TWRP 3.1.0-0. I have flashed TWRP 3.0.2 and it has been possible to flash this rom and GApps at once. This rom install TWRP 3.1.0-0 automatically and it is impossible to flash SuperSU afterwards
I am back on Lineage 14.1..

Thanks for the new build changelog?

Azazel Azay said:
Thanks for the new build changelog?
Click to expand...
Click to collapse
Well, all new features all the same as LineageOS's one except "disable timestamp preq" (will be in next builds).

new builds
Thank you for the new builds.
aosp-caf-n-mr1-20170609-pollux.zip
aosp-caf-n-mr1-20170609-pollux_windy.zip

Thank you for the new builds.
aosp-caf-n-mr1-20170711-pollux.zip
aosp-caf-n-mr1-20170711-pollux_windy.zip

I tried and works perfect, thanks!
Enviado desde mi 5056A mediante Tapatalk

nathandrake said:
I tried and works perfect, thanks!
Click to expand...
Click to collapse
same with me, flashed it today and quite happy thanks, dev :good:

[rom][z00a]xenon hd[unofficial][nougat 7.1.2]

http://www.xenonhd.com/
XenonHD is a custom firmware aka ROM for various Android devices. It is based on CyanogenMod 14.1/AOSP with additional features, performance and battery life improvements.
The idea behind XenonHD is to give users a ROM that is "blazing fast, rock stable and buttery smooth".
Kernel Source:
https://github.com/gena33/android_kernel_asus_moorefield
Source Link: https://github.com/TeamHorizon
ROM Derived From: Lineage OS
ROM Firmware Requirements: Unlocked BL, Recovery
Flashing Instructions:
CLEAN FLASH :
Download the latest build and GApps
Reboot to recovery
Make NAndroid backup (Not Necessary)
Wipe System, Data, Cache , Dalvik
Flash the latest build and GApps
Reboot
Download Links:
ROM: Nougat
https://drive.google.com/file/d/1f9GclDdgWl38MTEQhJePz-FIojF9ktgU/view?usp=drivesdk
Gapps: opengapps.org
XDA:DevDB Information
Xenon HD 7.1 ROM Z00A, ROM for the Asus ZenFone 2
Contributors
gena33, Garry2199
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.x
ROM Firmware Required: Must be on Latest Firmware
Based On: Lineage OS
Version Information
Status: Alpha
Created 2018-01-27
Last Updated 2018-01-27

Sorry for bad thread but XenonHD devs didn't give me template
ROM testers says it is quite stable

gena33 said:
Sorry for bad thread but XenonHD devs didn't give me template
ROM testers says it is quite stable
Click to expand...
Click to collapse
Well, we give a thread template only to Official maintainers. Anyway, dude, clean your thread.. "TeamHorizon's XenonHD rom builds for HTC One (m8)", at least fix this up

joe2k01 said:
Well, we give a thread template only to Official maintainers. Anyway, dude, clean your thread.. "TeamHorizon's XenonHD rom builds for HTC One (m8)", at least fix this up
Click to expand...
Click to collapse
Ok

Where is that testers who told that it is stable? I saw only two messages (one of them is mine) about battery drain issue.

drumsalve said:
Where is that testers who told that it is stable? I saw only two messages (one of them is mine) about battery drain issue.
Click to expand...
Click to collapse
on Telegram group

Bootloop when install xposed

drumsalve said:
Where is that testers who told that it is stable? I saw only two messages (one of them is mine) about battery drain issue.
Click to expand...
Click to collapse
On telegram test group everyone use Xenon
t.me/z00atest

Is this dead?
Sent from my ASUS_Z00AD using Tapatalk

kenbo111 said:
Is this dead?
Click to expand...
Click to collapse
Nop

Work in ze551ml (Z00AD) ?

shadauer said:
Work in ze551ml (Z00AD) ?
Click to expand...
Click to collapse
Z00a and z00ad are the same
Sent from my ASUS_Z00AD using Tapatalk

kenbo111 said:
Z00a and z00ad are the same
Sent from my ASUS_Z00AD using Tapatalk
Click to expand...
Click to collapse
But ... I'm afraid to install, I need the 7.x nougat urgently, so afraid to brick the device by putting this rom ... ze551ml

shadauer said:
But ... I'm afraid to install, I need the 7.x nougat urgently, so afraid to brick the device by putting this rom ... ze551ml
Click to expand...
Click to collapse
Use NutOS
Sent from my ASUS_Z00AD using Tapatalk

Uow, i had experience, working ! xD thanks for help, now i can use my apps

ROM updated!
https://www.androidfilehost.com/?fid=962339331459002446

How to root please? Just flashed, quite fast and strong.

lineage-15.0-20180624_093715-UNOFFICIAL-Z008
I can not test lineage-15.0-20180624_093715-UNOFFICIAL-Z008 due to incomplete bootlop system build.prop file does not exist
XenonHD is a custom firmware aka ROM for various Android devices. It is based on CyanogenMod 14.1/AOSP with additional features, performance and battery life improvements.
The idea behind XenonHD is to give users a ROM that is "blazing fast, rock stable and buttery smooth".
Kernel Source:
https://github.com/gena33/android_kernel_asus_moorefield
Source Link: https://github.com/TeamHorizon
ROM Derived From: Lineage OS
ROM Firmware Requirements: Unlocked BL, Recovery
Flashing Instructions:
CLEAN FLASH :
Download the latest build and GApps
Reboot to recovery
Make NAndroid backup (Not Necessary)
Wipe System, Data, Cache , Dalvik
Flash the latest build and GApps
Reboot
Download Links:
ROM: Nougat
https://drive.google.com/file/d/1f9GclDdgWl38MTEQhJePz-FIojF9ktgU/view?usp=drivesdk
Gapps: opengapps.org
XDA:DevDB Information
Xenon HD 7.1 ROM Z00A, ROM for the Asus ZenFone 2
Contributors
gena33, Garry2199
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.x
ROM Firmware Required: Must be on Latest Firmware
Based On: Lineage OS
Version Information
Status: Alpha
Created 2018-01-27
Last Updated 2018-01-27[/QUOTE]
---------- Post added at 07:54 AM ---------- Previous post was at 07:50 AM ----------
GiaSen
I can not test lineage-15.0-20180624_093715-UNOFFICIAL-Z008 due to incomplete bootlop system build.prop file does not exist cant you help me thanks

Ta muito top a xenon hd
Continue nesse trabalho a rom tem tudo para ser perfeita. Thanks.

clgt said:
How to root please? Just flashed, quite fast and strong.
Click to expand...
Click to collapse
use Magisk. find it on Groovy ROM thread.

[Discontinued]Pixel Experience P[UNOFFICIAL][14.12.2018][S9/S9+/N9]

Samsung Pixel Experience P​By CodeFox & OpenSauce9810​
What is this?
This is a Semi Generic System Image. That means it's a generic system image that's been optimised as much as possible for our Samsung Devices. This is what differentiates this rom from the one you can find in the Project Treble Forum. I also plan to provide regular updates and improvements very frequently. I'm aiming for weekly if not more.
Why not Rainbow_Dash?
We're a part of the same team and he's taking a break from developing for the moment, so I'm going to do my best to support you with regular updates and support where possible. So his previous version should be considered redundant.
How the heck do I flash this?
It's slightly different than flashing a zip, so here's what you need to do.
Download the image file
Flash BRJ6 Vendor (If you're not on it already)
Flash a compatible kernel (I believe Endurance Kernel AOSP Works fine)
Flash the System Image to your System Partition
Optional if you want root (but reccomended): Reboot to recovery again then flash your choice of Magisk. I use 17.1 as I can get galaxy wear to work with that version.
Reboot your device and you should be good to go! No need to flash gapps as they're included.
To boot recent GSI Builds, on S9/+ be sure to have:
•BRJ6 Vendor
•Eamons latest Endurance Kernel based on 8.1 (AOSP)
•Soldiers latest ELS
*On some ROMs you will find Fingerprint doesn't work, so flash Soliders latest ELS, try and let your phone boot and then flash Endurance again after. You will notice your Fingerprint process isn't in a loop anymore*
What's different to the PE in project treble forum?
Thanks to GRaf for this guidance ^^
Smoother UI Performance Fixes
Debloated unneccessary libs from other devices
Vibration Motor has been corrected (it's too powerful in GSI)
Regular Maintenance / Builds & Support
Changelog:
30.11.2018 - Initial XDA Release & Unofficial rollout.
01.12.2018
Animation integers corrected to be smoother
Black boot-animation added, no more being blinded by the boot animation
Pixel Live Wallpapers included
High Resolution default wallpaper added
09.12.2018 (Now maintained by @malinathani
Made system ui a hella smoother compared to before
Face unlock works
Phh settings removed. All samsung options should now be persistent.
14.12.2018
-Fixed fingerprint on note 9, should work now with almost any vendor so get the latest one
-Almost everything works now
Bugs:
Auto brightness and home button in always on display.
You tell me
Downloads:
System Image
Link to Endurance Kernel Thread for compatible kernel
Support & Feedback
I'm happy to provide as much support as possible. Through XDA here or you can get in touch with me and the rest of OpenSauce9810 + our community at our Telegram group here
If you're happy with the work I've put into this (endless amounts of hours trying to perfect GSI building) then a simple thanks here or clicking the thanks button below is very appreciated!
Credits and Thanks
Ivan - Thank you for helping me out every now and then when I'm being stoopid.
Rainbow_Dash - Pointing me in the right direction with regards to fixing the errors.
malinathani - For fixing the UI Jank which we experienced in GSI's. His fix is widely used in other GSI's now.
GRaf - best tester
The guys in telegram as a whole, thank you for the feedback and support.
XDA:DevDB Information
[Discontinued]Pixel Experience P[UNOFFICIAL][14.12.2018][S9/S9+/N9], ROM for the Samsung Galaxy S9
Contributors
CodeFox, Rainbow_Dash, malinathani, Mohammed Nathani, Opensauce9810, Ivan Meler, phhusson
Source Code: https://github.com/PixelExperience
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
ROM Firmware Required: BRJ3 Vendor
Based On: AOSP
Version Information
Status: Beta
Current Beta Version: 1
Beta Release Date: 2018-11-30
Created 2018-11-30
Last Updated 2019-01-07

working fine on s9+

Awesome thank you very much ?

thank you, could please post some screenshot.

Does not progress from white pixel boot screen for me s9+.

I'm a little confused by the instructions. I am on the BRJ8 vendor currently. Do i flash it in this order?
Wipe system, data, cache, dalvik cache
Install the rom img into the system partition
Reboot into recovery
Install the endurance kernel aosp 9.0
Correct?

LavaSnake54 said:
I'm a little confused by the instructions. I am on the BRJ8 vendor currently. Do i flash it in this order?
Click to expand...
Click to collapse
tried, doesn't go further than boot logo after flashing all that on BRJ8 So you need BRJ6

a_swed said:
doesn't go further than boot logo after flashing all that on BRJ8
Click to expand...
Click to collapse
read read read read

I've updated the OP with further guidance regarding getting it to boot. I don't have the S9/S9+ so I had to to go to a buddy and ask him. Hopefully this will help you get it booting now.

Wait what...... You're telling us to flash an android 8.1 kernel to an android 9 rom?

LavaSnake54 said:
Wait what...... You're telling us to flash an android 8.1 kernel to an android 9 rom?
Click to expand...
Click to collapse
Well we don't have a pie kernel sources yet, so yes. Plus it's a Generic System Image. The 8.1 kernel works fine.
New build posted. see OP for details.

One more question, I am already on BRJ8 firmware, and I heard somewhere that samsung doesn't allow you to downgrade to an older firmware. Is this true? Do i just flash the BRJ6 firmware on my already current rom?

LavaSnake54 said:
One more question, I am already on BRJ8 firmware, and I heard somewhere that samsung doesn't allow you to downgrade to an older firmware. Is this true? Do i just flash the BRJ6 firmware on my already current rom?
Click to expand...
Click to collapse
You need the vendor, nit the firmware. And yes, you can flash vendor and firmware.zips how you like. Versions up and down. I am speaking about the flashable version for TWRP.
---------- Post added at 06:41 PM ---------- Previous post was at 06:32 PM ----------
Flashable Vendors:
http://cloud.timo-ehlers.de/S9(+)/Vendor/

Nice work! Glad to hear you going with weekly updates too! Flashing this one asap tomorrow!

Snapdragon
I'm assuming this doesn't work on the US Snapdragon variants? Figured I'd ask. Nice job and keep developing people

notsotet said:
I'm assuming this doesn't work on the US Snapdragon variants? Figured I'd ask. Nice job and keep developing people
Click to expand...
Click to collapse
It will indeed work for SnapDragon variants friend. It's Samsung specific but still a generic image.

I'm stuck on Google logo
Came from ZRKZ
Factory reset - flashed vendor BRE6, flashed img, rebooted twice into Samsung, booted into google, progress bar keeps going and going... 20 minutes.

MidnightDevil said:
I'm stuck on Google logo
Came from ZRKZ
Factory reset - flashed vendor BRE6, flashed img, rebooted twice into Samsung, booted into google, progress bar keeps going and going... 20 minutes.
Click to expand...
Click to collapse
Have you flashed the 8.1 Endurance Kernel? Sounds like you may still have the pie kernel.

LavaSnake54 said:
Wait what...... You're telling us to flash an android 8.1 kernel to an android 9 rom?
Click to expand...
Click to collapse
Strangely enough Pixel Experience will only boot with Jesec's 8.1 ramdisk that my 8.1 kernel utilises. I'll update my OP to address this.

CodeFox said:
It will indeed work for SnapDragon variants friend. It's Samsung specific but still a generic image.
Click to expand...
Click to collapse
I will need a custom recovery though right? US Snapdragons are bootloader locked so I don't have any way of doing that

[PORT]Oxygen OS[LAVENDER][STABLE]

The stablest OOS Pie port ever for lavender
9.0.9 Port from Oneplus 6
Steps:
*Wipe system, dalvik, cache, data, vendor
*Flash the ROM zip
*Format Data (its different from wipe)
*Reboot
Notes:
*If the screen turns black after the setup screen, force reboot using power button
*if you want to flash any kernel(use AOSP kernels), flash magisk after flashing the kernel
Everything working including VOLTE
For any questions, join lavendergsi on telegram
Known Bugs:
Almost none other than
*Stock Face Unlock(You can use Google trusted facial recognition from Smart Lock)
Rom:
Check reserved
Credits:
guzram(for porting this ROM to lavender)
erfanoabdi(for GSI)
XDA:DevDB Information
[PORT] Oxygen OS [LAVENDER][STABLE], ROM for the Xiaomi Redmi Note 7
Contributors
wow suspect, erfanoabdi, guzram
Source Code: https://github.com/erfanoabdi/ErfanGSIs
ROM OS Version: 9.x Pie
ROM Kernel: Linux 4.x
ROM Firmware Required: Unlocked Bootloader, Custom recovery
Based On: Oxygen OS
Version Information
Status: Stable
Current Stable Version: 9.0.9
Created 2019-11-17
Last Updated 2019-11-17

Reserved
Rom :-
MOD EDIT: DL link removed

Reserved

Is selinux permissive?

no need to flash gapps?

Nice release!
I'm testing and get some problem, display seems to be always on night mode, even if I try to change that in settings...
Thanks for u hard work!

Guzram allowed you to release his work?

guzado said:
Nice release!
I'm testing and get some problem, display seems to be always on night mode, even if I try to change that in settings...
Thanks for u hard work!
Click to expand...
Click to collapse
I do not own any rights. The dev is not active for a while. I will add his exact xda username on credits when he is back on telegram. Thank him!

Shinsen26 said:
Guzram allowed you to release his work?
Click to expand...
Click to collapse
Nope. The dev is offline for a while. I will ask his permission when he comes back online. If he doesn't allow, I'll obviously close the thread. How can people in XDA miss this amazing port.

Thread closed until permissions from the original dev is granted
OP: Please check your PM-Inbox for more informtion.
PM me if you want to have it reopened.
strongst
Forum Moderator

[ROM][10.0][A2017x][UNOFFICIAL] LineageOS 17.1

​
First off wanted to thank ALL friends who were involved creating this Q for our beloved axon7. It took us a long time but we made it :highfive:​About Lineage OS:
Lin·e·age
/ˈlinēij/
noun
lineal descent from an ancestor; ancestry or pedigree.
a sequence of species each of which is considered to have evolved from its predecessor.
Disclaimer:
LineageOS (Lineage Android Distribution) members or anyone else on this website is not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in the products you find here before flashing it! YOU are choosing to make these modifications, and if you point the finger at us for messing up your device, we will laugh at you. Your warranty will be void if you tamper with any part of your device / software.
Instructions:
Attention! The bootloader needs to be unlocked!
0. unlocked, suited twrp ( i'm using twrp3218), oreo bootstack (i'm using universal one) of your choice...you know the drill, preferable already on a custom Pie rom
1. Copy LineageOS zip, optional gapps 10.0 ( i'm using nano) and magisk 20.4 to your device
2. Boot into twrp recovery (first backup your existing stuff)
3. Wipe cache, system, vendor & data
4. Flash ROM
5. Flash gapps (optional)
6. Flash Magisk 20.4 (optional)
7. Reboot and enjoy !
BUGS :
* camera may not be working on first boot, if so reboot a couple of times and it will
What is CAF?
Code Aurora, a Linux Foundation Collaborative Project, hosts tested open source software code needed to provide upstream enablement for innovative, performance optimized, network connectivity and related ecosystems to support system on a chip (SoC) products. It also serves as a staging area for open source code that is submitted to various upstream projects such as the Linux kernel and Android. CAF also mirrors key upstream projects for use by the community.
Sources, Changes, & Wiki:
Source | Changes | Axon 7 Wiki | Lineage OS
Credits:
@king1990
@runninghamster
@lightvortex
@raystef66
and all testers
Download : LATEST 17.06.2020 LineageOS 17.1 for axon7
Source Code: https://github.com/LineageOS/android
Kernel Source: https://github.com/OrdenKrieger/android_kernel_zte_msm8996
ROM OS Version: 10.x
ROM Kernel: Linux 3.x
ROM Firmware Required: O bootloader + region modem
Based On: LineageOS
Sec. Patch : 2020-05-05
Version Information
Status: pre-stable
Created: 2020-05-31
Last Updated: 2020-09-17

:good: good job

lightvortex said:
:good: good job
Click to expand...
Click to collapse
Thank you ! It's you who made the final touch after we booted

Good work?

Made a new module for reverting buttons : A2017X_Q_softkey_reverse_module
You can do it manually though too : https://forum.xda-developers.com/axon-7/themes/mod-soft-key-reverse-using-synapticsdsx-t3827574

somebody still cares axon 7... that's incredible

Guys, this is amazing! Thanks so much to everyone involved.

wow, that's amazing! Thank you guys so much for keeping our beloved Axon 7 alive. ?

Yea buddy!

Awesome work guys! I know you worked hard on this, and have been very kind and patient to those who kept asking about Q. Most of them anyways.

Wow! Thank you ray and king1990, runninghamster and lightvortex!!! I'll be trying this soon! (Even though this says pre stable, can anyone comment how close it is for a daily driver? I do need stability so I need to know what little bugs they're might be)

Thank you for the awesome job! You guys are amazing.

Thanks @raystef66 for keeping this awesome device alive.
I am still on SL!M8 B04 but as soon as Android 10 runs stable, I am going to change.

Holy [email protected] My axon is invincible!! Great job guys[emoji106]
Sent from my ZTE A2017X using Tapatalk

great.. thank for awesome work guys

@raystef66
can we have access to device tree source code.

Thanks for the great work. Pretty stable rom but I couldn't get 24Bit 192kHz Hi-Res audio output. Tried different players and their DSP engines, disabled LOS AudioFX from start but device keeps downmixing audio to 16 bit 48Khz.

Hey folks, I could use some help. Trying to install but having some issues. I'm coming from Lineage 16.0(treble). Already on O bootloader, have vendor partition and TWRP 3.2.3. I perform the recommended wipes.
The install goes well, I then install GApps Arm64 nano, then magisk v20.4.
Now, when I try to reboot, the normal screen appear but then the screen goes black and the red error light comes on. I can't get it past this.
Any ideas what I need to do different?
Thanks in advance.

A great Rom to be in Axon 7. Thanks and big salute for the hard work to developers. However, the navigation gestures are not working in Chinese version of Axon 7. Also, nav bar modules are not working either. Hope this is reported in future builds. Thank you once again. Great ROM.

Battery on Lock-screen
Great build so far. Seems to be good on the battery use too. For some reason my lock screen wasn't showing battery charge and i had to go into the "battery percentage" settings to get it to show.