Hi Guys,
I am newbie and I just installed this on my Citroen DS5. (I am not sure this is the correct forum, apologize in advance!).
This is specs on the unit:
px5, Android: 8.0.0 Kernel: 4.4.93+ Rocky @930 #36
Versionnumber: px5-userdebug 8.0.0
MCU version: mtce_mx2_v3.01_1
I have a couple of question:
1. Under settings, it should be one menu: Home App that I don't see. That's why, when I want to change my home screen app, I have to delete it and install it again. It was shipped originally with Launcher3.
2. Give it any sense that I should update MCU on this unit?
Thank you for your time
I'm looking for MCU version: mtce_mx2_v3.01_1
Can anybody help me?
Thanks in advance
sazias said:
I'm looking for MCU version: mtce_mx2_v3.01_1
Can anybody help me?
Thanks in advance
Click to expand...
Click to collapse
The same that me, help please!
Related
hi guys this is my first post and I need some help,
i bought a milestone second hand the other day from a CEX in my city. My question is that it has some Chinese firmware on it and I want it back to the factory stock firmware the device would of came with.
Can someone explain how I would go about this?
Device Info:
Firmware Version: Itfunz2.1_Eclipse_Terminator_II
Firmware Config Version: GAS_EMEA_USASHLS00WNDIT_P030
Baseband Version: 3GSMEPU91A_U_91.07.4EI
Baseband Config Version: USASHLSMR2WNDITB1B805D.0R
Kernel Version: 2.6.29-omap1a21146 (at) ca25rhe74#1
Build Number: Chinese_By _Martincz_Itfunz com
Any help would be much appreciated. Cheers
A factory reset would only reset you to the original state of that firmware - I'm pretty sure you will have to flash a new firmware - you can check threads here on how to do that. Its quite easy...
just flashed it to your favourite rom..
cyanogenmod is recommended..
you can flash official moto from here
http://and-developers.com/sbf:milestone
or a custom one from xda
Chelta said:
hi guys this is my first post and I need some help,
i bought a milestone second hand the other day from a CEX in my city. My question is that it has some Chinese firmware on it and I want it back to the factory stock firmware the device would of came with.
Can someone explain how I would go about this?
Device Info:
Firmware Version: Itfunz2.1_Eclipse_Terminator_II
Firmware Config Version: GAS_EMEA_USASHLS00WNDIT_P030
Baseband Version: 3GSMEPU91A_U_91.07.4EI
Baseband Config Version: USASHLSMR2WNDITB1B805D.0R
Kernel Version: 2.6.29-omap1a21146 (at) ca25rhe74#1
Build Number: Chinese_By _Martincz_Itfunz com
Any help would be much appreciated. Cheers
Click to expand...
Click to collapse
There is a thread about putting your phone back to stock...probably what you need.
Quick rundown for a return to official Mot rom:
1.Usb drivers for you os
2.Rsd lite (software from mot...google it)
3.Correct sbf for your country
An sbf is a file from motorola that includes an image of your entire phone (bootloader, firmware, baseband, etc).
Hope this helps
Sent from my Milestone using Tapatalk
HI all,
i have erisin 9062B and i want a CW.
i get from erisin one update but i dont like it. The Original FW make to much problems.
is it possible to get malaysk or other CFW.
System Version: BMW_V1.00.0013.58.1
Kersion Version: PX3_V2.00.00012.00.00
MCU: LM-AND841-8015V1.21
DVD: V.1.18
no one can helps????
Hi to all
I own a EONON GA7153 and I would like your help for flashing the correct software.
The MCU Version doesn't help to identify if the device is MTCB or MTCD. It does no contain the MTC variant. The specs are:
Processor type: Quadcore-R16
Android 6.0.1
MCU Version: 5.3.19-122-12-C0301-170309
System version: V7.3.1_20170314.122224_KLD1-0-1
DVD version: 2.13.15-1200xh-150417
Which is the correct software to flash?
Any help much appreciated! Thank you in advance!
(If I am in a wrong section, please move the thread. Thanks.)
did you have any luck with this, im kinda stuck as well ive got the GA7150
I think you have a MTCD KLD unit. They are not selling MTCB with android 6.0 AFAIK.
I have a GA7163
MCU version: 5.3.19-122-50-C03101-170309
System version: V7.3.1_20170314.122224_KLD1-0-1
DVD version: 2.13.15-1200xh-150417
Have you done anything with your unit yet?
I rooted mine but never made a backup of my system and was messing with it and accidentally corrupted my su binary trying to convert it to chainfires supersu which i messed up broke my root and my ability to root so if you do end up doing anything with it make sure an do a backup and if you would please share your backup with me so I can fix my mistake our system version is the same so it should work in mine
How to rooting eonon ga7163 ?
methana said:
How to rooting eonon ga7163 ?
Click to expand...
Click to collapse
just used kingroot
Hi,
I have Eonon GA7150A
My MCU Version is listed as:
MTCD_WWW_V2.54b_2
Build number is
px5-userdebug 6.0.1 MXC89L user.hct.20170617.171922 test-keys
Android version
6.0.1 / Oct 1 2016 patch level
Kernel
3.1.0
[email protected] #1019
Jun 9 2017
I don't know if your 7153 or the other guys 7150 are the same as my 7150A but if they are perhaps they are an MTCD.
HTH
forbiddenera said:
Hi,
I have Eonon GA7150A
My MCU Version is listed as:
MTCD_WWW_V2.54b_2
Build number is
px5-userdebug 6.0.1 MXC89L user.hct.20170617.171922 test-keys
Android version
6.0.1 / Oct 1 2016 patch level
Kernel
3.1.0
[email protected] #1019
Jun 9 2017
I don't know if your 7153 or the other guys 7150 are the same as my 7150A but if they are perhaps they are an MTCD.
HTH
Click to expand...
Click to collapse
No theyre not or they would say "MTCD" in the MCU section.
Eonon rebadge units from a variety of manufacturers, they dont just sell MTC units.
The best advice I can give other posters here is to look through the Android headunits general section for devices with similar MCUs, devices with "R16" in the processor field use Allwinner cpus, which will also help identify the units.
Hi all members, ihave china android 7.0 without name , plz help me to upgrade it , because i have problem of the radio rds thx
Dali vw 1977 said:
Hi all members, ihave china android 7.0 without name , plz help me to upgrade it , because i have problem of the radio rds thx
Click to expand...
Click to collapse
Can you give more information? Add also a screenshoot of the info system at the settings screen
julitodecarrion said:
Can you give more information? Add also a screenshoot of the info system at the settings screen
Click to expand...
Click to collapse
How can i send you photos ?
Model name: rkpx3
Android version: 7.0
Kernel version: 3.0.36+ [email protected] #51
Build number:
AUTH:0
ANDROID: eng.dufeng.20170523.112003
MCU:Mar 21 2017ksa3 662x 7716-84
SYSTEM: RK1_V01_C00_B01_2017-04-18
APP:RK11_V01_C02_B0001_2017-04-20
Hey guys, I bought a generic head unit from a supplier. Turns out the unit was updated a while back and the customer support is pretty bad. Was wondering if there's any custom ROM i could flash the Head Unit to bring it up to date?
Current specs:
Android Version 8.1.0
Baseband Version: FM_Base_18A_RLS2_ISHARKL2_W18.35.1|sc9853_modem|08-27-2018 02:25:35 Marlin2_17b_iot_W18.41.3|marlin2_cm4|10-10-2018 13:14:02
Build Number: OPM2.171019.012 release-keys
System Info: APP 1024x600 2019-01-15 16:18:17
CPU Info: Intel Airmont eight-core 1.8GHZ 4+64 GB SC9853
MCU Version: 2019.01.24 11:04:37 NOR_53_C63L_G32P48F64_Ver:1.0
BT Version: BLINK_8761ATV_RELEASE2/2019:01:09:14:05:17_blink
BTW, Any chance anyone know who's the MCU developer for this unit?
It's not an MTC(B,C,D, or E) so unlikely to be answered in the MTCB forum.
Head unit update
charleschg said:
Hey guys, I bought a generic head unit from a supplier. Turns out the unit was updated a while back and the customer support is pretty bad. Was wondering if there's any custom ROM i could flash the Head Unit to bring it up to date?
Current specs:
Android Version 8.1.0
Baseband Version: FM_Base_18A_RLS2_ISHARKL2_W18.35.1|sc9853_modem|08-27-2018 02:25:35 Marlin2_17b_iot_W18.41.3|marlin2_cm4|10-10-2018 13:14:02
Build Number: OPM2.171019.012 release-keys
System Info: APP 1024x600 2019-01-15 16:18:17
CPU Info: Intel Airmont eight-core 1.8GHZ 4+64 GB SC9853
MCU Version: 2019.01.24 11:04:37 NOR_53_C63L_G32P48F64_Ver:1.0
BT Version: BLINK_8761ATV_RELEASE2/2019:01:09:14:05:17_blink
BTW, Any chance anyone know who's the MCU developer for this unit?
Click to expand...
Click to collapse
I have the same head unit albeit a different MCU and BT version.
Mine is a Funrover head Unit. The customer support sent me a link to an update but I don't think it's as up to date as yours.
I'm having problems with unstable display . This problem has been going on for over 12 months and the customer support keeps sending me around in circles.
If you still have have your update information I would greatly appreciate the link.