I am noob when it comes to flashing Samsung devices i have done it in past on my Redmi,google,Motorola.
I have Samsung galaxy note 8 T-mobile US Unlocked Network officially from T-Mobile it self.
I am currently on Build: R16NW.N950USQS5CRL1 JANUARY 1 ,2019.
QUES??
1. Can I Flash Stock Firmware "N950USQS5CRL1"
2. If Yes Will it Trip Knox or screw up in any way?
3. How can i do it?
4. Most Important will it relock Network, will i need to unlock it again?
Please Answer If Possible In Detail!!
1. Yes, though it's redundant. Why re flash the same fw?
2. No, offical software won't trip anything.
3. Read the firmware guide.
4. Firmware flashing isn't related to SIM unlock.
The T-Mobile Note8 is bootloader locked which means you cannot trip Knox by definition. You need an unlocked bootloader (which is not possible on any US Snapdragon models at this time) in order to flash software that can trip Knox. If your phone is paid off, then you are not SIM locked to Tmo and you can use phone with any network (SIM) you wish. SIM lock is different from bootloader lock.
Sent from my Pixel 3 XL
Ace42 said:
1. Yes, though it's redundant. Why re flash the same fw?
2. No, offical software won't trip anything.
3. Read the firmware guide.
4. Firmware flashing isn't related to SIM unlock.
Click to expand...
Click to collapse
I am talking about the Unbranded Rom or stock rom as iam on t mobile rom!
yash1410 said:
I am talking about the Unbranded Rom or stock rom as iam on t mobile rom!
Click to expand...
Click to collapse
You said CRL1, which doesn't exist for the U1 XAA. What you need is CRL2 (Dec) or CSA1 (latest w/ Jan) for 950U1.
Read all the steps for using unlocked firmware. Setup will need SDK tools, a PC, etc.
https://forum.xda-developers.com/galaxy-note-8/how-to/guide-sm-n950u-u1-t3685884
Ace42 said:
You said CRL1, which doesn't exist for the U1 XAA. What you need is CRL2 (Dec) or CSA1 (latest w/ Jan) for 950U1.
Click to expand...
Click to collapse
I have SM-N950U not U1!
Note 8s in US are all the same. N950U1 just has the unbranded FW. N950U have the branded FW.
All Samsung original FW is called stock ROM, whether branded or not. Don't mix branded and stock.
The are several threads that describe I detail how to switch from branded to unbranded FW, use forum search and start reading and learn.
yash1410 said:
I have SM-N950U not U1!
Click to expand...
Click to collapse
Yes, I'm well aware of that. If you read the thread I linked you'd understand why I mentioned U1. CRL1 corresponds to carrier branded fw, but your post is asking how to flash the U1's software. That's why flashing CRL1 is redundant.
Ace42 said:
Yes, I'm well aware of that. If you read the thread I linked you'd understand why I mentioned U1. CRL1 corresponds to carrier branded fw, but your post is asking how to flash the U1's software. That's why flashing CRL1 is redundant.
Click to expand...
Click to collapse
Can i contact you at DM
yash1410 said:
I have SM-N950U not U1!
Click to expand...
Click to collapse
He is answering your question. We know you have the N950U. You are asking about the unbranded/unlocked firmware, which is for the N950U1.
The N950U (carrier-locked Note 8), N950U1 (factory unlocked Note 8), and the N950W (Canadian Note 8) are all the same exact device hardware-wise. The firmware for any of them is compatible with all of them.
If you want to get on the unlocked, unbranded firmware, you will have to flash the N950U1UES1CRL2 build. You will need patched ODIN, and it may wipe your device.
When someone on the forums tells you to check out another thread, for example Ace told you to look in the carrier switching thread, it is because the answer to your question is there. In this case, you wanted detailed extensive instruction. The carrier switching thread is a very detailed guide on how to do EXACTLY what you are wanting to do.
Next time, show some patience, check out the resources you are pointed to, and so some research on your own. There is absolutely NOTHING wrong with doing your own research and learning WHAT you're doing BEFORE you do it.
Mr. Orange 645 said:
He is answering your question. We know you have the N950U. You are asking about the unbranded/unlocked firmware, which is for the N950U1.
The N950U (carrier-locked Note 8), N950U1 (factory unlocked Note 8), and the N950W (Canadian Note 8) are all the same exact device hardware-wise. The firmware for any of them is compatible with all of them.
If you want to get on the unlocked, unbranded firmware, you will have to flash the N950U1UES1CRL2 build. You will need patched ODIN, and it may wipe your device.
When someone on the forums tells you to check out another thread, for example Ace told you to look in the carrier switching thread, it is because the answer to your question is there. In this case, you wanted detailed extensive instruction. The carrier switching thread is a very detailed guide on how to do EXACTLY what you are wanting to do.
Next time, show some patience, check out the resources you are pointed to, and so some research on your own. There is absolutely NOTHING wrong with doing your own research and learning WHAT you're doing BEFORE you do it.
Click to expand...
Click to collapse
Thank you!
Related
Well i have a Note 9 128gb T-mobile unlocked N960U that is carrier unlocked
Is it possible to reflash it with clean firmware from samsung for n960u so i can get rid of The T-mobile logo every time i start the mobile ?
i don't want to try to root i know it's not possible just want original firmware if it works hope someone can answer
LennartL said:
Well i have a Note 9 128gb T-mobile unlocked N960U that is carrier unlocked
Is it possible to reflash it with clean firmware from samsung for n960u so i can get rid of The T-mobile logo every time i start the mobile ?
i don't want to try to root i know it's not possible just want original firmware if it works hope someone can answer
Click to expand...
Click to collapse
You can flash it using modded or patched ODIN to the U1 non-carrier firmware to get rid of the T-Mobile boot animation. It will also remove the T-Mobile video calling dialer though but WiFi Calling will still work.
What he said^^^ flash the U1 firmware. Note your device will be wiped.
Sent from my SM-N960F using Tapatalk
Well that doesn't matter to me. Have never used it yet so it doesn't matter if I wipe it. But will I get regular updates if I flash it with u1 firmware ?
And which firmware should I select it exists a few on this page or do I need to take the tmb one for T-Mobile but I'm not using T-Mobile and will probably never do
Here is the page samsung-updates.com/device/?id=SM-N960U1
LennartL said:
Well that doesn't matter to me. Have never used it yet so it doesn't matter if I wipe it. But will I get regular updates if I flash it with u1 firmware ?
And which firmware should I select it exists a few on this page or do I need to take the tmb one for T-Mobile but I'm not using T-Mobile and will probably never do
Here is the page samsung-updates.com/device/?id=SM-N960U1
Click to expand...
Click to collapse
Do not use the one labeled TMB U1. That firmware isn't official and could potentially break OTA's. You want to use the U1 XAA with the same version or newer bootloader than what your device currently has. The the first character of the last five characters of the build number contains your bootloader version. I don't believe the Note 9 has a v2 bootloader yet, but I have only really followed ATT U firmware, U1 firmware, and TMB U firmware. When you flash, do not use the HOME_CSC! remember your device will be wiped and factor reset so back up what you want before starting.
I'm running the TMB U1 firmware. No bloat or boot screens and I get OTAs around the same time as the U t mobile devices. I honestly dont see a real difference from the XAA u1 vs the TMB U1 firmware to be honest
Well that's it's not a problem haven't started to use the device yet. But it's not any risk that I'm brick my phone when flashing with u1 firmware.
One thing I noticed it exists unbranded firmware what I can see on Samsung's page for n960U can I not use that firmware ?
But I should not flash home_csc ? I'm guessing that contains special files for u1 ?
LennartL said:
Well that's it's not a problem haven't started to use the device yet. But it's not any risk that I'm brick my phone when flashing with u1 firmware.
One thing I noticed it exists unbranded firmware what I can see on Samsung's page for n960U can I not use that firmware ?
But I should not flash home_csc ? I'm guessing that contains special files for u1 ?
Click to expand...
Click to collapse
The non-branded firmware is the U1. The reason the modded or patched ODIN is needed is to skip the check that you are flashing the same carrier firmware. The hardware for the US and Canadian models are exactly the same. The firmware on Sansung's page isn't meant for flashing in ODIN.
Although I have only seen one user experience issues with the TMB U1, which for some reason, gave him a modded software warning when they tried to check for updates. I would stick to using the actual non-carrier specific firmware, which has T-Mobile's WiFi Calling and still has band 71 enabled.
ok so the SM-N960U is carrier branded and the SM-N960U version ubranded i thought it was some more technical difference between the different models.
Well the phone i have is new just carrierd unlocked but it's coming from t-mobile but i'm not going to use it in usa right now. So unless i need to have t-mobile's software i gladly skip it and use unbranded and that is the "U1 XAA" i need to use ?
LennartL said:
ok so the SM-N960U is carrier branded and the SM-N960U version ubranded i thought it was some more technical difference between the different models.
Well the phone i have is new just carrierd unlocked but it's coming from t-mobile but i'm not going to use it in usa right now. So unless i need to have t-mobile's software i gladly skip it and use unbranded and that is the "U1 XAA" i need to use ?
Click to expand...
Click to collapse
The U is carrier specific, the U1 is a generic non-carrier specific firmware that should work with most US carriers, and the W is the Canadian equivalent of the U1. The hardware for all three is exactly the same.
The unbranded and non-carrier specific firmware does have its advantages. No carrier bloat, it works well with T-Mobile, and if you switch carriers, the phone will reconfigure for the SIM inserted. The only time the U firmware is recommended is if you need a specific feature for a particular carrier that isn't available in the U1 firmware. Video Calling for T-Mobile, WiFi Calling on AT&T, and so on.
jcsww said:
The U is carrier specific, the U1 is a generic non-carrier specific firmware that should work with most US carriers, and the W is the Canadian equivalent of the U1. The hardware for all three is exactly the same.
The unbranded and non-carrier specific firmware does have its advantages. No carrier bloat, it works well with T-Mobile, and if you switch carriers, the phone will reconfigure for the SIM inserted. The only time the U firmware is recommended is if you need a specific feature for a particular carrier that isn't available in the U1 firmware. Video Calling for T-Mobile, WiFi Calling on AT&T, and so on.
Click to expand...
Click to collapse
Ok so with other words i can use the unbranded XAA firmware and keep OTA now. But if i ever want to use T-mobile or AT&T further on i just install corresponding firmware for that carrier right ?
LennartL said:
Ok so with other words i can use the unbranded XAA firmware and keep OTA now. But if i ever want to use T-mobile or AT&T further on i just install corresponding firmware for that carrier right ?
Click to expand...
Click to collapse
That's correct! The U1 non-carrier firmware is like a stepping stone, If you want to move from one U firmware to one from a different carrier, you need to flash to U1 first and always make sure you never use the HOME_CSC. The HOME_CSC doesn't wipe the device, which can cause a number of issues when converting. Being on the U1 though, makes it very easy to go back to any U firmware because you are already at the point where you could just straight flash to any U or W firmware as long as the bootloader version is the same or newer than what your device has at that time.
ok thanks for all advice
just to be curious because i don't know but wish to learn. Why should u never flash hone_csc and what does that file do?
LennartL said:
ok thanks for all advice
just to be curious because i don't know but wish to learn. Why should u never flash hone_csc and what does that file do?
Click to expand...
Click to collapse
The HOME_CSC prevents wiping while flashing. If you skip the wiping part, you risk having no data, no potential cellular connectivity, no different unlocked bands for the firmware you are flashing to, etc. You pretty much put yourself in a position where you have to flash again, but actually use the other CSC to ensure your device works properly.
Any unlocked USA note 9s willing to upload there modem files somewhere wanna try and make a sim unlock
Help on Flashing Tmobile firmware on Unlocked Note 9
jcsww said:
The U is carrier specific, the U1 is a generic non-carrier specific firmware that should work with most US carriers, and the W is the Canadian equivalent of the U1. The hardware for all three is exactly the same.
The unbranded and non-carrier specific firmware does have its advantages. No carrier bloat, it works well with T-Mobile, and if you switch carriers, the phone will reconfigure for the SIM inserted. The only time the U firmware is recommended is if you need a specific feature for a particular carrier that isn't available in the U1 firmware. Video Calling for T-Mobile, WiFi Calling on AT&T, and so on.
Click to expand...
Click to collapse
Hello all. I am new to this community. I have read several of the posts that mention that the US Snapdragon variant of the Note 9 cannot be flashed with TWRP or custom roms. However I see that based on this post regarding T-Mobile that the U1/ublocked variant can be flashed with any of the other U variants as long as the bootloader is the same. Does this mean that I can flash the T-Mobile firmware on my unlocked note 9? If so can anybody guide me on how to do this? I am trying to go back to having T-Mobile's built in multiline and voicemail functionality which I lost after going from the T-Mobile branded Note 8 to the unlocked Note 9. Thanks!
lguti46 said:
Hello all. I am new to this community. I have read several of the posts that mention that the US Snapdragon variant of the Note 9 cannot be flashed with TWRP or custom roms. However I see that based on this post regarding T-Mobile that the U1/ublocked variant can be flashed with any of the other U variants as long as the bootloader is the same. Does this mean that I can flash the T-Mobile firmware on my unlocked note 9? If so can anybody guide me on how to do this? I am trying to go back to having T-Mobile's built in multiline and voicemail functionality which I lost after going from the T-Mobile branded Note 8 to the unlocked Note 9. Thanks!
Click to expand...
Click to collapse
Yes you can. Use ODIN to flash the T-Mobile firmware. It's that simple. You don't need an unlocked bootloader or root. No it won't trigger Knox.
If you need detailed instructions, they have been posted in some of the firmware threads here, o you can go to the Note 8 forums and read through the carrier switching thread. Just follow the steps for flashing carrier firmware. The steps are all the same, you just make sure you're using the right firmware for your device.
Thank you so much! I was able to successfully flash to T-Mobile using the forum threads.
Hi there again i have Little bit trouble to locate the exat firm i need. The baseband my phone is using seems to be N960USQS1ARH6 i do understand i should use xaa but i dont find any baseband N960USQS1ARH6 xaa im litte bit lost can someone help please ?
LennartL said:
Hi there again i have Little bit trouble to locate the exat firm i need. The baseband my phone is using seems to be N960USQS1ARH6 i do understand i should use xaa but i dont find any baseband N960USQS1ARH6 xaa im litte bit lost can someone help please ?
Click to expand...
Click to collapse
That's because U1 XAA is on ARJ9. There won't be a U1 Firmware with an ARH6 build number.
Hi guys,
I recently switched from iPhone to Android, and I love it.
I purchased a carrier unlocked Verizon Note 9, and I'm using it on AT&T. I was wondering if flashing it to AT&T firmware would require rooting the device and would that trip Knox hence disabling Samsung pay and other features?
I have also heard that rooting Samsung phones voids warranty and I'm just trying to avoid that.....
I love the phone the way it is, but I want to use WiFi calling and other AT&T apps. I have done my research regarding whats needed to flash the firmware, but nowhere it says the method is actually "rooting" the device. I just want to double check before I flash.
Any feedback would be highly appreciated.
Thanks in advance.
You don't need to root it. Download the ATT firmware with the SamFirm tool, then use the patched ODIN 3.13.1 to flash it.
Mr. Orange 645 said:
You don't need to root it. Download the ATT firmware with the SamFirm tool, then use the patched ODIN 3.13.1 to flash it.
Click to expand...
Click to collapse
Thank you very much for your assistance. I'll go ahead and flash it.
I am confused. I have a verizon unlocked note 9. i have been unable to download att firmware and reflash to att software. what am i doing wrong.>? sm-960U
hucksterfool1 said:
I am confused. I have a verizon unlocked note 9. i have been unable to download att firmware and reflash to att software. what am i doing wrong.>? sm-960U
Click to expand...
Click to collapse
Well, I don't know. You have to provide more info. How is not working? At what point does it fail? What firmware did you download? How are you trying to flash it. What steps are you taking?
As per the title, bought an unlocked G970U instead of U1 by mistake. Should I expect a Verizon splash screen greeting me in the bootloader? I don't wanna see any branding anywhere in my phone. Can I get rid of any of that flashing U1 firmware?
redsmith said:
As per the title, bought an unlocked G970U instead of U1 by mistake. Should I expect a Verizon splash screen greeting me in the bootloader? I don't wanna see any branding anywhere in my phone. Can I get rid of any of that flashing U1 firmware?
Click to expand...
Click to collapse
Which G970U phone you have bought. If it was a Verizon branded, then their logo should greet you If you bought T-Mobile variant, then its logo will be present while booting the phone. Flashing is possible and it depends which carrier you have. Also don't you have the phone in hand yet?
Charkatak said:
Which G970U phone you have bought. If it was a Verizon branded, then their logo should greet you If you bought T-Mobile variant, then its logo will be present while booting the phone. Flashing is possible and it depends which carrier you have. Also don't you have the phone in hand yet?
Click to expand...
Click to collapse
Yeah, the phone hasn't arrived yet. In the pictures I can see the box has no carrier logo, but I'm guessing it's Verizon because I haven't seen a Verizon branded box yet. Also, the box definitely says G970U.
I've been a Nexus/Pixel user all my flashing life, so I'm well versed in the fastboot/adb dark arts. How does this compare to Odin? There are so many new terms that I'm still trying to understand: CSC, HOME CSC, USERDATA, etc. Is there any guide I can follow to flash my incoming phone to U1 firmware?
redsmith said:
Yeah, the phone hasn't arrived yet. In the pictures I can see the box has no carrier logo, but I'm guessing it's Verizon because I haven't seen a Verizon branded box yet. Also, the box definitely says G970U.
I've been a Nexus/Pixel user all my flashing life, so I'm well versed in the fastboot/adb dark arts. How does this compare to Odin? There are so many new terms that I'm still trying to understand: CSC, HOME CSC, USERDATA, etc. Is there any guide I can follow to flash my incoming phone to U1 firmware?
Click to expand...
Click to collapse
The T-Mobile version is also G970U, so it can be pretty much any carrier. USERDATA file is present in carrier firmware, if you flash unlocked firmware you won't need/have this file.
Link below is for S8, but works for S10 as well. Of course you would need to use firmware files for your phone. I would also use instructions under "Flashing standard firmware" first using Standard Odin. If you get an error when staring to flash, then use (Patched) Prince Comsy's Odin.
https://forum.xda-developers.com/galaxy-s8/how-to/snap-guide-flashing-standard-fw-carrier-t3625817
Charkatak said:
The T-Mobile version is also G970U, so it can be pretty much any carrier. USERDATA file is present in carrier firmware, if you flash unlocked firmware you won't need/have this file.
Link below is for S8, but works for S10 as well. Of course you would need to use firmware files for your phone. I would also use instructions under "Flashing standard firmware" first using Standard Odin. If you get an error when staring to flash, then use (Patched) Prince Comsy's Odin.
https://forum.xda-developers.com/gal...rrier-t3625817
Click to expand...
Click to collapse
Thanks a lot. One last question. I'm based in Mexico (we only get Exynos here), so I got a U version to get the Snapdragon CPU. Obviously I don't want any US carrier branding/blotware in the phone since I couldn't benefit whatsoever from it. What about OTA's, though? Will I get them whenever Samsung releases an update for U1? Or will that depend on my carrier? Should I update monthly using Odin? Do I have to factory reset? So many questions :silly:
The link you provided doesn't work, btw. But I've since found some other Odin guides. Thanks!
redsmith said:
Thanks a lot. One last question. I'm based in Mexico (we only get Exynos here), so I got a U version to get the Snapdragon CPU. Obviously I don't want any US carrier branding/blotware in the phone since I couldn't benefit whatsoever from it. What about OTA's, though? Will I get them whenever Samsung releases an update for U1? Or will that depend on my carrier? Should I update monthly using Odin? Do I have to factory reset? So many questions :silly:
The link you provided doesn't work, btw. But I've since found some other Odin guides. Thanks!
Click to expand...
Click to collapse
I corrected the link in case you need it.
To answer OTA question: I had unlocked U1 model of S8 and when I flashed it with T-Mobile firmware then my phone got OTA from T-Mobile when they release it. I assume if you have carrier branded phone and flash it with U1(XAA) firmware then most likely your phone will get updates when Samsung releases them. You won't have to use Odin every time there is an update if you flash properly. Also, it would be advisable to flash using CSC file instead of HOME CSC, so your phone would be wiped. It is because you change firmware and want your software to be fully compatible. After flashing and you check your phone's software update and see that is shows "not compatible or something similar", then I would just suggest you to do "reset"(factory reset) from setting and after you setup your phone, that message will disappear. Also don't do any software update before flashing as you phone may get a fresher firmware than the one you might be trying to flash.
1) Check your current phone firmware
2) Download firmware you want, but if you can, get the firmware that is a previous one than the current one, so you will check to see how your phone gets OTAs
3) Flash using Odin
4) After that disconnect and let the phone do its thing
5) Set it up and check to see if software update section in settings don't give you any messages such as the one I outlined above, if it does, just factory reset the phone
I've seen a couple of threads about this here, but I'm confused about where I can get the firmware to flash an unlocked S10 (SM-G973U1) to T-Mobile firmware, and they've not really told me where to download the firmware that I need. One thread pointed at S10+ firmware, not useful to me, and the other didn't give any URL for downloading firmware.
Can anyone help me find the right firmware? I've used Odin before, and am fine with that. I also know that I have to have the right firmware for this to work *smile*.
Also, the firmware to flash back from T-Mobile to unlocked would be very useful, since I may want to change back to unlocked at some point. The reason that I want to flash T-Mobile firmware is since I'm still on the May 1 "monthly" Android security update on my unlocked S10. That doesn't make me happy, more than a quarter behind by this point...very disappointed.
Thanks!
There's a firmware thread here:
https://forum.xda-developers.com/galaxy-s10/how-to/s10e-g973u-g973u1-firmware-links-t3905852
RogerSC said:
I've seen a couple of threads about this here, but I'm confused about where I can get the firmware to flash an unlocked S10 (SM-G973U1) to T-Mobile firmware, and they've not really told me where to download the firmware that I need. One thread pointed at S10+ firmware, not useful to me, and the other didn't give any URL for downloading firmware.
Can anyone help me find the right firmware? I've used Odin before, and am fine with that. I also know that I have to have the right firmware for this to work *smile*.
Also, the firmware to flash back from T-Mobile to unlocked would be very useful, since I may want to change back to unlocked at some point. The reason that I want to flash T-Mobile firmware is since I'm still on the May 1 "monthly" Android security update on my unlocked S10. That doesn't make me happy, more than a quarter behind by this point...very disappointed.
Thanks!
Click to expand...
Click to collapse
If the phone is SIM unlocked, the Firmware you want is the USC or XAA firmware... That way it will switch carriers apps and bloatware when you change sim cards...
Search for samfirm on google....
Have Fun!!
Hi all, I'm new to modding in general so there's many things I don't quite understand, hoping somebody can help.
I bought an S10 from a site which was supposed to just send me a refurbed (italian) S10, instead they sent me the US version, (G973U) and I believe it is carrier locked since it's stuck with Android 9 and doesn't find any update.
I have tried searching to no avail what I should flash to simply unbrand it, and allow it to receive OTA updates without tripping Knox.
The build version is the following: PPR1.180610.011.G973USQU2ASGC and the CRC is XAA/XAA/ATT
Thanks in advance.
You shall call them.
Who and what for? I'm past the point of dealing with those sellers, I just want to flash the phone.
CSC (not CRC).
XAA is a multi-region USA ROM, so I don't think it will change over properly for you in Italy. There are threads here for how you reflash a different ROM. The one I used for my S10+ was this one: https://forum.xda-developers.com/t/...e-links-and-flashing-discussion-here.3905897/ but I am sure there is one like that for your S10 non-plus... find it, follow the instructions, and you should be all set.
Thanks! I'm a newbie, what does it mean it wouldn't change properly? No OTAs? Tripping KNOX?
I have found this which seems to be the equivalent of the link you posted.
So, I should flash the U1 version right? However I see only a file "SAU - 1 - ....", and my build number doesn't end in that, furthermore I don't know which bootloader version I'm at.
lrzfc said:
Who and what for? I'm past the point of dealing with those sellers, I just want to flash the phone.
Click to expand...
Click to collapse
Oh ok. I couldn't understand first.
For that, You'll flash in EDL mode. But the problem is if your device is powered by a snapdragon chip, it'll not working seamlessly.
FardinIslam said:
Oh ok. I couldn't understand first.
For that, You'll flash in EDL mode. But the problem is if your device is powered by a snapdragon chip, it'll not working seamlessly.
Click to expand...
Click to collapse
No problem. I'm aware of the mode I have to enter to flash, as above I'm trying to figure out which stock rom I should flash to avoid tripping knox, and to receive OTAs. What won't work seamlessly?
Well, mods can close the thread, found the way to do it. Leaving it in case somebody ever needs it.
First, found & checked the bootloader version (5th number from the right in the build version) since you can only flash older bootloader versions apparently.
Then downloaded through Frija the rom for the unlocked phone variant (SM-G973U1) and the unbranded CSC (XAA)
Then using odin 3.13.3b flashed the rom
Watch this video
lrzfc said:
Well, mods can close the thread, found the way to do it. Leaving it in case somebody ever needs it.
First, found & checked the bootloader version (5th number from the right in the build version) since you can only flash older bootloader versions apparently.
Then downloaded through Frija the rom for the unlocked phone variant (SM-G973U1) and the unbranded CSC (XAA)
Then using odin 3.13.3b flashed the rom
Click to expand...
Click to collapse
Hello, I'm in more or less same situation. When you flashed, which files did you use? All of them or just the AP_*** file?
Never mind. Flashed it anyway, now I don't see the AT&T startup screen anymore which is promising. Firmware version is now Android 11 (SM-G973U1 and not SM-G973U) on XAA CSC. Will see if I get any firmware updates later.