Related
AOSP-CAF for Xperia Tablet Z
This is a builds for Xperia Tablet Z LTE/Wi-Fi.
About ROM
AOSP-CAF Rom is based on AOSP. It offers powerful performance with good battery backup and OMS7 support.
Code Aurora Forum (CAF) is a consortium of companies with projects serving the mobile wireless industry. Software projects it concerns itself with are e.g. Android for MSM, Femto Linux Project, LLVM, MSM WLAN and Linux-MSM. Code Aurora is basically AOSP plus all Qualcomm specific enhancements and optimization.
Installation
Download the latest build
Place ROM in your SD card or Internal Storage
Reboot into recovery mode
Full wipe and factory reset (recommended)
Flash ROM
Reboot
Downloads
Pollux: AFH
Pollux_windy: AFHRecommended Recovery (optional)
TWRP 3.1
Pollux: https://dl.twrp.me/pollux
Pollux_windy: https://dl.twrp.me/pollux_windyGapps (optional)
OpenGapps (ARM/Android-7.1): http://opengapps.org
Information: Flash the GApps after the first boot and setup.Sources
AOSP-CAF on Github
Kernel: apq8064
Features:
Enabled Calls/SMS for Pollux only
Increased sound volume
Xperia framework permissions for install Sony's apps
TWRP Integrated
XDA:DevDB Information
AOSP CAF, ROM for the Sony Xperia Tablet Z
Contributors
CaHbKaUp, Men_in_black007
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.4.x
Based On: AOSP
Version Information
Status: Testing
Beta Release Date: 2017-08-26
Created 2017-05-10
Last Updated 2017-09-28
Reserved
I cannot find root management in developer settings, do I have to flash su?
botsaris said:
I cannot find root management in developer settings, do I have to flash su?
Click to expand...
Click to collapse
Yes, you should flash SuperSU separately.
Hi,
I have got an error when install GApps- Open_gapps-arm-7.1-nano-20170521.zip
"ERROR 64: Wrong architecture to set-up Open GApps pre-bundlet busybox"
Any clue what I have to do?
Regards, thanks for your work for this excellent tablet
Edit
I cannot go back too LineageOS14.1 either. I get an error
"Can't install this package over new build"
Please help me to make my tablet working again. please
mirek54 said:
Hi,
I have got an error when install GApps- Open_gapps-arm-7.1-nano-20170521.zip
"ERROR 64: Wrong architecture to set-up Open GApps pre-bundlet busybox"
Any clue what I have to do?
Regards, thanks for your work for this excellent tablet
Edit
I cannot go back too LineageOS14.1 either. I get an error
"Can't install this package over new build"
Please help me to make my tablet working again. please
Click to expand...
Click to collapse
Seems you select wrong architecture when download gapps.
Before flash LineageOS, first flash boot.img and then boot into TWRP from this kernel or simply wipe system partition.
I have TWRP 3.1.0-0 installed. I have followed tutorials https://forum.xda-developers.com/xp...de-tutorial-sony-xperia-tablet-z-lte-t3392831
Pos. 8)-10).
and have tried to install GApps arm, 7.1
Why I cannot install back Lineage 14.1?
Btw
AOSP CAF (LA.UM.5.7.r1) is working correctly but I am missing GApps.
Edit
It is something wrong with TWRP 3.1.0-0. I have flashed TWRP 3.0.2 and it has been possible to flash this rom and GApps at once. This rom install TWRP 3.1.0-0 automatically and it is impossible to flash SuperSU afterwards
I am back on Lineage 14.1..
Thanks for the new build changelog?
Azazel Azay said:
Thanks for the new build changelog?
Click to expand...
Click to collapse
Well, all new features all the same as LineageOS's one except "disable timestamp preq" (will be in next builds).
new builds
Thank you for the new builds.
aosp-caf-n-mr1-20170609-pollux.zip
aosp-caf-n-mr1-20170609-pollux_windy.zip
Thank you for the new builds.
aosp-caf-n-mr1-20170711-pollux.zip
aosp-caf-n-mr1-20170711-pollux_windy.zip
I tried and works perfect, thanks!
Enviado desde mi 5056A mediante Tapatalk
nathandrake said:
I tried and works perfect, thanks!
Click to expand...
Click to collapse
same with me, flashed it today and quite happy thanks, dev :good:
[ROM][I9100G][6.0.1] LineageOS 13.0 [UNOFFICIAL][Galaxy S2G]
LineageOS is a free, community built, aftermarket firmware distribution of Android 6.0.1 Marshmallow, which is designed to increase performance and reliability over stock Android for your device.
This is an UNOFFICIAL build of LineageOS 13.0 for Samsung Galaxy S2 G (I9100G). It's build from sources on github.com/cyanogenmod & github.com/xdaamg. Standard functionalities are working, when you follow flash instructions. Android 6.0.1 is running smooth on this device. Please read 'problems and not working'-section before you flash this ROM.
Disclaimer:
By flashing a custom rom, your warranty is void.
I am not responsible for bricked devices, dead SD cards and so on. You are choosing to make these modifications.
I will not give support for any modifications, frameworks and apps you install.
I will not give support, if you did not follow flash instructions 'word by word'.
Confirmations of working things are welcome. If you found a bug, provide a logcat and description of it.
Click to expand...
Click to collapse
First time installation instructions:
Backup your media files (photo, music, downloads) stored on internal storage
Download LineageOS i9100g ROM, OpenGApps (ARM, Android 6.0, Stock) and .gapps-config.zip (details see below) to your sdcard. Extract .gapps-config.zip to same place as your opengapps file on sdcard, usually root of sdcard.
Boot into TWRP Recovery. If you don't have TWRP 2.8.7.0, flash TWRP and reboot into twrp recovery. Then wipe system, data, internal, dalvik and cache.
Flash LineageOS 13.0 rom and OpenGApps Stock with .gapps-config file. It will install opengapps nano and replace aosp keyboard with google keyboard. Reboot system and follow instructions in setup wizard. After finishing all, reboot again.
To get root access, download su-arm-i9100g.zip and flash it in twrp recovery
Set default phone app, before you make your first call. Go to "Settings/Apps/Advanced/Default Apps/Phone App" and set it to "Phone".
Updating Lineage 13.0 ROM:
Download Lineage 13.0 i9100g ROM to your phone
Boot into recovery and install LinageOS 13.0 i9100g ROM and reboot system
Download I9100G LineageOS 13.0 ROM UNOFFICIAL:
Download i9100g LineageOS 13.0 20180131
Support development of this rom:
If you find this rom useful, consider donating please. Your donation helps to keep this rom alive and is your chance to support development.
Download Google Apps:
Open GApps (recommended: ARM, 6.0, Stock (Download))
Download .gapps-config file:
Download .gapps-config
Download root 'su', flash with twrp and activate under 'developer settings':
Download su-arm-i9100g.zip
Download su-arm-i9100g-remove.zip
Status:
Android-Version: 6.0.1 (R81)
LineageOS-Version: 13.0
Security patch level: 01.01.2018
Kernel-Version: 3.0.31
SELinux: permissive
Standard functionalities working:
Telefon, sms, wifi, data 2g/3g, grafics, sensors, compass, location, camera, flashlight, vpn, wifi hotspot, playstore.
Special features:
TWRP IsoRec: Booting TWRP from recovery partition + supports booting TWRP 3.0+ build for i9100 device
F2FS: Flash-friendly file system supported (data, cache, sdcard)
zram support: virtual swap compressed in RAM
Best standby times by supporting app standby (doze)
Higly responsive, smooth gui
First i9100g android 6.0 rom and only one which still gets updates
Changelog LineageOS & i9100g device tree:
Lineage 13.0 changes
20170609: Upgrade CyanogenMod 13.0 to LineageOS 13.0
20170611: Touchkey Backlight fixed
20170922: Updated sources to latest Android 6.0.1 R80; Security fix in kernel: net/bluetooth to fix 'blueborn' problem
20171024: Updated sources to latest Android 6.0.1 R81; Security fix in kernel: net/mac80211 to fix wifi security problem; security fixes in wpa_supplicant to fix wifi wpa2 connections
20171226: november/december 2017 android security fixes; various lineage os changes
20180131: January 2018 android security fixes; hardware_ti_omap4 changes
Not supported:
Manual selection of network carrier is not supported -> use automatic network search
Snap camera supports picture and video recording. Panorama mode is not supported (but working with some other camera apps). Digital zoom is not supported.
Some display features are not supported, for example 'night mode'
Problems and/or not working:
Sound distortions with some codecs and sample rates. In some situations or with some codecs, sound/ringtones etc. sounds like with some kind of electronical effect. -> try different equalizer settings or use cm12.1, if audio quality is not accectable for you
GPS does not find enough satellites to get a location fix -> use cm-12.1 if you need this feature. This bug could be solved by replacing proprietary libstlport.so with opensource external libstlport.so, but this breaks simcard detection.
When you found a bug/error/problem, post a logcat with description. Postings without these informations are likely to be ignored.
FAQ/Solutions:
Root: To get root access, download su-arm-i9100g.zip and flash with twrp. Then go to settings/about phone and touch build-number seven (7) times. This will activate developer settings. Then go to settings/developer settings/root access and set it to apps only or apps and adb.
Recovery: LineageOS 13.0 comes with Cyanogen Recovery by default. But this rom supports booting IsoRec TWRP recovery. If recovery is not working, enter 'download mode' and flash a new recovery via odin, for example TWRP 2.8.7.0.
Bluetooth connections to headsets, speakers -> When you have connection problems try to disable battery optimisations for your audio app: go to settings/battery, select menu on top right and choose 'optimisation', in dropdown menu choose 'all applications' and select your music player app (for example cyanogenmod eleven), select 'not to optizime'. Reboot after you set this option.
Android security patch level: Google releases monthly security updates. Security bulletin is split into different security patch levels. Relevant for i9100g lineage 13 is only first part of this bulletin, for example patch level 2017-05-01, with changes in aosp source code. These issues gets fixed with an updated lineage 13.0 rom. Other issues mentioned in drivers and kernel are device specific. We could be affected by this errors or similar bugs, but only manufactor of this hardware could update (driver) binaries (and they don't care about old devices). The same with kernel bugs, i9100g kernel could be affected by this errors too, but there are no active kernel developers for this device and so these problems will often stay unfixed.
Galery app: If galery app does not display all your albums/pictures/video for example of your sdcard: Open file explorer and search for a file '.nomedia' on your sdcard root/picture/video folder. If it's there, delete it. It tells android not to index this folder. Then make a new folder on your sdcard, for example 'media'. Move your pictures/videos/music to your new media folder. Mediascanner will scan these files automatically now and they should be visible in gallery app.
Optimisations:
Low app space: If you are low on app data storage, think about repartitioning your phone storage. 4 or 6 gb should be sufficient even for many apps. Follow instructions in this thread. Alternatively use Lanchon Repit Tool.
Battery: Display and data connections/syncing use most energy. I suggest to reduce display brightness to a minimum or switch off adaptive brightness. Also switch off background data connections/syncing for apps you don't use or which will be updated when you really use it.
After first flash give phone some extra time to complete all tasks, even when it's reacting already to your inputs, it's working hard. Wait some minutes. It's also a good idea to do another reboot after some time. This solved some problems in the past.
Force closes: If you are experiencing force closes try first to clean cache/dalvik cache in recovery. If it's still not working, go to settings/apps, find the offending app and clear data. Still no solution? Then do a clean flash with factory reset and re-install apps without importing backups.
TWRP Recovery only signed (recovery, without lineageos):
Download TWRP 2.8.7.0 Recovery only signed
Download TWRP 2.8.7.0 Recovery only signed TAR for Odin
Lineage 13.0 ROM archive (outdated, you should only use it, if latest build is not working for you):
Download i9100g LineageOS 13.0 20171226Download i9100g LineageOS 13.0 20171024
Download i9100g LineageOS 13.0 20170922
Download i9100g LineageOS 13.0 20170712
Download i9100g LineageOS 13.0 20170611
Download i9100g LineageOS 13.0 20170609
XDA:DevDB Information
I9100G LineageOS 13.0 Android 6.0.1, ROM for the i9100
Contributors
adxamg
Source Code: http://github.com/xdaamg
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.0.x
Based On: LineageOS
Version Information
Status: Beta
Current Beta Version: 20180131
Beta Release Date: 2018-01-31
Created 2017-06-11
Last Updated 2018-02-01
Reserved
New build online, lineage 13.0 i9100g 20170611.
Change:
- Touchkey backlight fixed and working normally again
I miss this device, thanks OP for keeping this device alive.
Thanks Man YOU ARE GREAT.
thanks for the new ROM.
Great job!
Any way we could help in pinning down the issue with the libstlport.so open source version which would fix the GPS issue? Probably only with coding knowledge?
Gesendet von meinem SM-G930F mit Tapatalk
McConnor said:
Great job!
Any way we could help in pinning down the issue with the libstlport.so open source version which would fix the GPS issue? Probably only with coding knowledge?
Click to expand...
Click to collapse
All sources are on github. Everyone interested could support the process of fixing issues, by modifying sources, building a new rom, flashing, testing.
Mobile Network not working
hui guys, flashed rom succesfully.. but internet navigator can't detect mobile network.. no internet
Le-Rouge said:
hui guys, flashed rom succesfully.. but internet navigator can't detect mobile network.. no internet
Click to expand...
Click to collapse
Hi, had the same issue, maybe this can fix it: change in APN-settings values for "APN protocol" and "APN roaming" from "IPv4/IPv6" to "IPv4".
BR
Ok. I will try n give a feedback
Thanks ledseppelin its ok now.. just refreshed ipv4 entries in apn config
i will download it
and review
but please put some screenshots in Thread
Uploaded a new lineageos 13.0 build 20170712.
Change: Latest android security patch level: July and June aosp patches.
adxamg said:
Uploaded a new lineageos 13.0 build 20170712.
Change: Latest android security patch level: July and June aosp patches.
Click to expand...
Click to collapse
see my private massage please
Hi @adxamg
Please help me with kernel Compiling! I downloaded everything (CM11_Kernel + GCC_4.7) needed for kernel Compiling.
The only thing that i don't have is "Initramfs".
So PLEASE PLEASE PLEASE Tell me what should i do? were to get it?
This is the 2nd time i ask.
AhmAdDev99 said:
Hi @adxamg
Please help me with kernel Compiling! I downloaded everything (CM11_Kernel + GCC_4.7) needed for kernel Compiling.
The only thing that i don't have is "Initramfs".
So PLEASE PLEASE PLEASE Tell me what should i do? were to get it?
This is the 2nd time i ask.
Click to expand...
Click to collapse
I don't care how many time you ask.
Learn how to compile yourself. cm11 is old, you may need an older environment to compile it. sun java6 for example, which is not supported any longer. You will run into some problems, when you want to compile cm11 today.
What are the known bugs in this ROM?
A QUESTION DIRECTED THE THOSE WHO TESTED IT
Just installed the ROM today. Gave my old I9100G a new lease of life. It's working perfectly fine. Thanks to @adxamg !
Hope this ROM continues to get updates.
low system space
I get the message "insufficient storage space available in System partition" when installing Open Gapps. I tried the stock version. Something to do about that?
Resurrection Remix N for Xiaomi Mi 5s (capricorn)
PSA: LineageOS 14.x is dead. Please switch to LOS 15.x or Resurrection Remix O.
Unofficial ROM built by iamnotstanley (me).
This is a pure Resurrection Remix N ROM, built with the latest LineageOS sources and stock toolchains.
Builds are rootless, you can flash Magisk for root access. This has to be done everytime you flash a build.
Working:
Everything
Bugs:
Same as in LineageOS 14.1 & Resurrection Remix N
No OTA updater (01-16)
Downloads:
Builds
GApps (opengapps.org) Recommended: ARM64 - 7.1 - nano
MIUI firmware update zips Requirement: MIUI 8.1.4 or newer firmware
Sources:
LineageOS sources for capricorn (device tree, kernel, etc.)
Resurrection Remix
Xiaomi vendor blobs
XDA:DevDB Information
Unofficial Resurrection Remix N 5.8.5, ROM for the Xiaomi Mi 5s
Contributors
iamnotstanley, Resurrection Remix team, LineageOS team, TheMuppets team
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.x
ROM Firmware Required: MIUI 8.1.4 dev firmware (LOS14.1 requirement)
Based On: LineageOS 14.1
Version Information
Status: No Longer Updated
Created 2017-12-25
Last Updated 2018-03-03
Thank you
i am using it already and everything works fine thanks alot
Wohoo! At last we have RR Rom update again.
How about battery life ?
wow..niceee!!
Anyone using this? How's battery life and stability? I am currently using LOS 15.1...
bunnahabhain said:
Anyone using this? How's battery life and stability? I am currently using LOS 15.1...
Click to expand...
Click to collapse
i am using it and every thing is great :good:
As a second user
Copy and paste does not work properly
New build! (12-30) https://www.androidfilehost.com/?w=files&flid=235654
I set up the OTA updater, maybe it's working, maybe not.
hi,
can i flash it over the "normal" rr build (last one was 20171011)?
stokks said:
hi,
can i flash it over the "normal" rr build (last one was 20171011)?
Click to expand...
Click to collapse
I haven't tried it yet, but I think you can't. You can try it for yourself, but I recommend a clean install.
very smooth, good combination with floppy kernel, thank you
rezarivani said:
very smooth, good combination with floppy kernel, thank you
Click to expand...
Click to collapse
Agree, good ROM[emoji106]
Sent from my MI 5s using Tapatalk
Anyone having an issue with YouTube running slow?
Liffeyman said:
Anyone having an issue with YouTube running slow?
Click to expand...
Click to collapse
Do you have a problem with a sound?
Flash firmware 7.12.21
Послато са MI 5s
Nice ROM, many thanks.
I was waiting for an up to date RR version
Just uploaded the new weekly build. You'll need to update the firmware to version 8.1.4 or newer before updating to this build. You can download it from fjtrujy/capricornCNFirmware repo.
Also it would be great if anyone could test the OTA updates. I configured up in the previous build, but I haven't tested yet, and sorry for the late updates, I don't really have time this week.
By the way, I started using Telegram again, if anyone wants to send me a message about anything, you can do it there.
The OTA updates are not working, sadly..
There is a message poping up stating that checking is not possible..
iamnotstanley said:
New build! (12-30) https://www.androidfilehost.com/?w=files&flid=235654
I set up the OTA updater, maybe it's working, maybe not.
Click to expand...
Click to collapse
This OTA will download full rom or dowload change??
Sent from my MI 5s using Tapatalk
https://mirror.byteturtle.eu/8.7.5/multirom_HMS2_8.7.5_v8.1.0_b2_1d23876b4d.zip
Builded with new technology called FSF (Fast and Smooth Firmware), reincarnation of METHIC (both, FSF and METHIC, written by a team)
Flash through TWRP with ALL wipes WITHOUT restore backup!!! Only "clean" flash...
No new updates!
Andoid 32Bit like global rom or it is fix in that custom rom, and here all is ok (64bit)?
Can you update the MultiRom File to latest version of Miui10
dcamartin04 said:
Can you update the MultiRom File to latest version of Miui10
Click to expand...
Click to collapse
Sadly, but project is closed
why did they closed this project?
[DISCONTINUED] Builds at sx.ix5.org in the aosp-10 directory.
Changelog here: https://sx.ix5.org/changelog.html
Install guide: Flashing AOSP on Xperia XZ
You still need the "Pie" Software Binaries version 9. Do not use the Android 10/Kernel 4.14 images.
XDA:DevDB Information
Xperia XZ AOSP Android 10 builds, ROM for the Sony Xperia XZ
Contributors
local__hero
Source Code: https://git.ix5.org/felix/local-manifests-ix5/src/branch/ix5-customizations-10
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
ROM Firmware Required: Latest stock .184 / .192
Based On: AOSP
Version Information
Status: Nightly
Created 2019-10-20
Last Updated 2019-10-20
Reserved
Reserved
Download gapps from this link: https://www.cyanogenmods.org/downloads/pico-opengapps-for-android-10-arm64/
Instructions to install gapps:
1-Flash rom zip and magisk (optional)
2-Boot the device once (yes don't flash gapps on first boot because of a bug with android setup)
3-After you boot the device once go back to the recovery. If you didn't flash magisk in last step your recovery will be overwriten by aosp recovery. If that happens just reflash twrp using fastboot.
4-Flash gapps
5-Boot the device now you will get error like "Android setup has stopped working". Just click more info and disable android setup from settings.
6-Login to your google account by running play store and follow the simple steps.
Android setup bug may get fixed in stable versions of gapps but for now install it like this.
I tried to follow the procedure updating my OmniRom 9.0 but the phone goes into bootloop.
i've also tried everything several times different species and versions, without gapps it works! (intigriter update button missing?)
Thanks a lotʕっ•ᴥ•ʔっ
F8332
Rom for f8332 Sim 2 not works.
I like this rom but i installed 2 times and all the time cpu could be 55-60 degrees and randomly reboot. I cant fix this.
F8332
Gps not working. I can fix this.
Hope the ROM will grow as mature as daily driver!
XperiaXZ F8331, newest stock Oreo (unlockedBL), TaiChi modules like Xedge
ibondd said:
I like this rom but i installed 2 times and all the time cpu could be 55-60 degrees and randomly reboot. I cant fix this.
Click to expand...
Click to collapse
Disable finger print unlocking and try again. Also uninstall any kernel tweak mods.
---------- Post added at 08:33 AM ---------- Previous post was at 08:30 AM ----------
Bekoll1003 said:
Gps not working. I can fix this.
Click to expand...
Click to collapse
Install "Global Optimized GPS File Replacer" from magisk.
I haven't any tweaks or kernel. I have stock oreo and i using aosp kernel when i installed android 10
My fingerprint hardware is doesn't working. How can i disable this?. My stock rom is doesn't see fingerprint sensor but this rom can see
ibondd said:
I haven't any tweaks or kernel. I have stock oreo and i using aosp kernel when i installed android 10
My fingerprint hardware is doesn't working. How can i disable this?. My stock rom is doesn't see fingerprint sensor but this rom can see
Click to expand...
Click to collapse
Maybe your stock firmware is from the U.S? they have it disabled over there
archie_77 said:
Maybe your stock firmware is from the U.S? they have it disabled over there
Click to expand...
Click to collapse
İ have latest oreo CUSTOMİZED TR
Deleted
f8332
I hope there will be dual sim support for f8332 in the future. Thanks. I really like this rom
What about Android 10 TREBLE rom?
xperia xz f8331 Android 10.0.
LukianX said:
What about Android 10 TREBLE rom?
Click to expand...
Click to collapse
İ am writing this article android 10.0 Nightly.
Very very good. Everything is working right now.
Excelent. Thanks to those who contributed.
Fatih--xz said:
İ am writing this article android 10.0 Nightly.
Very very good. Everything is working right now.
Excelent. Thanks to those who contributed.
Click to expand...
Click to collapse
Which ROM is this? Is this quack treble by phhusson?