Related
Hello people
i'm aware that there are guides out there, but i'm honestly not the best at all this flashing stuff, i have done it to a few phones but this one needs to be done just right!
So, where should i begin?, i reckon i should start with unlocking the phone via the unlock tool (i am registered and accepted) and then flash TWRP via that tool?
or is the best/only way of flashing TWRP with the ADB fastboot?
Citroon said:
Hello people
i'm aware that there are guides out there, but i'm honestly not the best at all this flashing stuff, i have done it to a few phones but this one needs to be done just right!
So, where should i begin?, i reckon i should start with unlocking the phone via the unlock tool (i am registered and accepted) and then flash TWRP via that tool?
or is the best/only way of flashing TWRP with the ADB fastboot?
Click to expand...
Click to collapse
There is a Mi5 flashing tool, but I've never used it.
sent from my Mi5
Citroon said:
Hello people
i'm aware that there are guides out there, but i'm honestly not the best at all this flashing stuff, i have done it to a few phones but this one needs to be done just right!
So, where should i begin?, i reckon i should start with unlocking the phone via the unlock tool (i am registered and accepted) and then flash TWRP via that tool?
or is the best/only way of flashing TWRP with the ADB fastboot?
Click to expand...
Click to collapse
Use MiUnlock tool to unlock BL
Then flash TWRP through fasboot
otonieru said:
Use MiUnlock tool to unlock BL
Then flash TWRP through fasboot
Click to expand...
Click to collapse
my problem now is i have no idea how to get miui 7 on it. Iknow that all CM based roms will end in a bootloop if i try to flash with that on.
i have tried a number of things, last time i tried i ended up with it not detecting my sim card, so i had to revert back to Miui 8
Citroon said:
my problem now is i have no idea how to get miui 7 on it. Iknow that all CM based roms will end in a bootloop if i try to flash with that on.
i have tried a number of things, last time i tried i ended up with it not detecting my sim card, so i had to revert back to Miui 8
Click to expand...
Click to collapse
Use miflash tool to flash latest stable global miui 8, then flash CM
It will be fine. I went to CM that way
otonieru said:
Use miflash tool to flash latest stable global miui 8, then flash CM
It will be fine. I went to CM that way
Click to expand...
Click to collapse
i guess ill trust you then! =)
i have the latest stable rom with my bootloader unlocked i'll try to flash TWRP now
did you do that with ADB? seems like im a tad unlucky there as well. (i'm not a noob at this, nor a pro)
Citroon said:
i guess ill trust you then! =)
i have the latest stable rom with my bootloader unlocked i'll try to flash TWRP now
did you do that with ADB? seems like im a tad unlucky there as well. (i'm not a noob at this, nor a pro)
Click to expand...
Click to collapse
No, the MIUI need to be flashed through Miflash tool
TWRP through fastboot
And CM through TWRP
No adb at all
otonieru said:
No, the MIUI need to be flashed through Miflash tool
TWRP through fastboot
And CM through TWRP
No adb at all
Click to expand...
Click to collapse
my miflash wont detect my phone :/
Citroon said:
my miflash wont detect my phone :/
Click to expand...
Click to collapse
let me correct that, it wont detect the file
Citroon said:
let me correct that, it wont detect the file
Click to expand...
Click to collapse
What do you mean by that?
marcoly said:
What do you mean by that?
Click to expand...
Click to collapse
in the flash tool it simply says "error could not find the package"
Citroon said:
in the flash tool it simply says "error could not find the package"
Click to expand...
Click to collapse
Could you post screenshot of MiFlash showing path too?
marcoly said:
Could you post screenshot of MiFlash showing path too?
Click to expand...
Click to collapse
This is what it does, it finds my phone
Gyazo link: https://gyazo.com/a68917c96a4e9d6b3aa4da60ae671454
i locate the file, i've tried both in zip and as a normal folder.
Citroon said:
This is what it does, it finds my phone
Gyazo link: https://gyazo.com/a68917c96a4e9d6b3aa4da60ae671454
i locate the file, i've tried both in zip and as a normal folder.
Click to expand...
Click to collapse
this is another problem, when i want to flash TWRP it cant find my device
https://gyazo.com/9ef62b14719dcc9049b7103167921853
Your thread is getting slightly confusing so let's do it step by step.
Is your phone currently unlocked?
To check, put it into fastboot mode manually without adb:
Turn off your device. Then turn on your device again while holding volume down button.
Plug in your device. Use fastboot:
Code:
fastboot oem device-info
Post screenshots.
Reboot your phone. Post a screenshot of your "About phone" settings menu.
Citroon said:
Hello people
i'm aware that there are guides out there, but i'm honestly not the best at all this flashing stuff, i have done it to a few phones but this one needs to be done just right!
So, where should i begin?, i reckon i should start with unlocking the phone via the unlock tool (i am registered and accepted) and then flash TWRP via that tool?
or is the best/only way of flashing TWRP with the ADB fastboot?
Click to expand...
Click to collapse
I also tried this way.But not miflash tool. I use twrp to flash global stable rom,boot up the rom and flash twrp through fastboot.And then you can flash your favourite rom.
Hi,
sorry to hijack this thread, but i also have problem flashing TWRP.
I have unlocked phone.
I have USB debugging enabled.
I can reboot to fastboot via adb.
I ca flash twrp (twrp-3.0.2-1-gemini.img 25.2M 2016-07-19 18:48:36 EDT).
But when i go to recovery i still see Mi PcSuite thing. No twrp.
What am i doing wrong? IS there some other, more appropriate twrp image?
Svashtar said:
Hi,
sorry to hijack this thread, but i also have problem flashing TWRP.
I have unlocked phone.
I have USB debugging enabled.
I can reboot to fastboot via adb.
I ca flash twrp (twrp-3.0.2-1-gemini.img 25.2M 2016-07-19 18:48:36 EDT).
But when i go to recovery i still see Mi PcSuite thing. No twrp.
What am i doing wrong? IS there some other, more appropriate twrp image?
Click to expand...
Click to collapse
I got mine sorted out, what you are missing is when you are done flashinh you have to type "Fastboot reboot" and then set TWRP to default recovery
hope that helps you out
Same problem for me, when i type "Fastboot reboot", my Mi5 reboot quickly and after when i go to recovery i see also Mi PC Suite....
Do you have a workaround ?
Second question, is it normal that time to send TWRP.img to phone in ADB is only 0,9s ?
http://forum.xda-developers.com/showthread.php?p=69249337
sent from my MI5
Hey guys. i got my phone a week ago, was happily using it until i noticed the Vendor Rom 8.0.8.0 M0AHCNDI2 days ago. Decided to flash the Official Stable ROM with chinese MI PC Suite. Checked forums and finally after downloading the Official Stable Chinese ROM managed to flash my phone with it. Except for some problems i encountered while using Google apps it was running fine. After few hours i decided to try the Ofiicial Chinese Dev Rom aswell. But after flashing via Chinese MI PC Suite my phone got stuck on bootloop. Now i can't flash the stable rom back and my phone is stuck. Help Please, Thanks in advance
Kithrae said:
Hey guys. i got my phone a week ago, was happily using it until i noticed the Vendor Rom 8.0.8.0 M0AHCNDI2 days ago. Decided to flash the Official Stable ROM with chinese MI PC Suite. Checked forums and finally after downloading the Official Stable Chinese ROM managed to flash my phone with it. Except for some problems i encountered while using Google apps it was running fine. After few hours i decided to try the Ofiicial Chinese Dev Rom aswell. But after flashing via Chinese MI PC Suite my phone got stuck on bootloop. Now i can't flash the stable rom back and my phone is stuck. Help Please, Thanks in advance
Click to expand...
Click to collapse
Instead of using PC Suite, boot your phone into fastboot mode and flash the ROM using MiFlash. Don't use Mi PC Suite. Follow instructions on one of the guides in the forum and you should be fine.
satishp said:
Instead of using PC Suite, boot your phone into fastboot mode and flash the ROM using MiFlash. Don't use Mi PC Suite. Follow instructions on one of the guides in the forum and you should be fine.
Click to expand...
Click to collapse
Can i use Fastboot with locked bootloader?
Kithrae said:
Can i use Fastboot with locked bootloader?
Click to expand...
Click to collapse
Chances are it's already unlocked, with vendor rom (let's hope so). Check through fastboot with command prompt
fastboot oem device-info
Don't use PC suite until they fix it's problems.
jazz452 said:
Chances are it's already unlocked, with vendor rom (let's hope so). Check through fastboot with command prompt
fastboot oem device-info
Don't use PC suite until they fix it's problems.
Click to expand...
Click to collapse
My phone doesn't even charge now and doesn't show the mi logo any longer. The only thing happens when i connect the charger is that the led blinks red continuously. Is it hardbricked? What can i do now? Sorry to trouble you
Edited. Now I get the mi logo back after an hour of changing.
Kithrae said:
My phone doesn't even charge now and doesn't show the mi logo any longer. The only thing happens when i connect the charger is that the led blinks red continuously. Is it hardbricked? What can i do now? Sorry to trouble you
Click to expand...
Click to collapse
As you're not sure whether your phone is charging, I would suggest keeping it connected to the charger for a few hours. This way, it may eventually get charged atleast to a safe level at some point.
After this, if you dont already have ADB and Fastboot installed, install it from the guide in the forums. Make sure to uninstall PC Suite first.
Once ADB is installed, open up the shell, boot device into fastboot mode and connect to PC. In the command shell,
Type fastboot oem device-info
It should show you the device bootloader lock status. Though most phones which come with Vendor ROMs have unlocked bootloaders, this is not always the case as my phone came with a vendor ROM while bootloader was locked. I suspect this is because vendors may have a signed Custom ROM file which can be flashed using the stock recovery, meaning bootloader unlocking is not a necessity for them to load the custom firmware.
Once you check whether bootloader is unlocked, if it isnt, unlock the bootloader using the guide.
Then install MiFlash and flash the fastboot ROM
if it is locked (afaik, mi suite can lock bootloaders, but there is no compatible mi pc suite for the mix available, so it shouldn't) then you need a deep flash cable to force flash anything in miflash tool. buy one for a few dollar on aliexpress.
xiaomi deep flash cable. with the button.
xiaomi deep flash cable. with button and usb-C adapter
underlines said:
if it is locked (afaik, mi suite can lock bootloaders, but there is no compatible mi pc suite for the mix available, so it shouldn't) then you need a deep flash cable to force flash anything in miflash tool. buy one for a few dollar on aliexpress.
xiaomi deep flash cable. with the button.
xiaomi deep flash cable. with button and usb-C adapter
Click to expand...
Click to collapse
I was wondering how the OP flashed using Mi PC Suite considering the Mix isnt supported. Maybe he is referring to Mi Flash as PC Suite.
If thats the case he may have messed something during the flashing process. Isn't there a way to enter EDL mode without the deep flash cable? I think it was done via a fastboot command.
satishp said:
I was wondering how the OP flashed using Mi PC Suite considering the Mix isnt supported. Maybe he is referring to Mi Flash as PC Suite.
If thats the case he may have messed something during the flashing process. Isn't there a way to enter EDL mode without the deep flash cable? I think it was done via a fastboot command.
Click to expand...
Click to collapse
First of all THANK YOU ALL for helping out. I just downloaded the Chinese MI Pc Suite. It said my phone has an update (it was in chinese so i had to look it up via google translate) then i clicked download and update. it downloaded the 8.0.12.0 Chinese Stable rom and flashed my phone with it. It was working fine but i tried to flash the Dev Rom the same way and it's stuck now. I didn't even know the Mi Flash tool until i opened this thread. Now i have the Mi Flash tool but my phone doesn't show up on it. I don't know how to use ADB and Fast Flash tools. Tried the forum but there are so many guides and i'm not sure which one would suit my problem. Now all i want is getting my phone working again and switching to EU ROM and not touching anything risky ever again.
Kithrae said:
First of all THANK YOU ALL for helping out. I just downloaded the Chinese MI Pc Suite. It said my phone has an update (it was in chinese so i had to look it up via google translate) then i clicked download and update. it downloaded the 8.0.12.0 Chinese Stable rom and flashed my phone with it. It was working fine but i tried to flash the Dev Rom the same way and it's stuck now. I didn't even know the Mi Flash tool until i opened this thread. Now i have the Mi Flash tool but my phone doesn't show up on it. I don't know how to use ADB and Fast Flash tools. Tried the forum but there are so many guides and i'm not sure which one would suit my problem. Now all i want is getting my phone working again and switching to EU ROM and not touching anything risky ever again.
Click to expand...
Click to collapse
You can follow this guide compiled by @underlines : Guide: (17-01-09) Flash Global/China ROM, Root, gapps, Xposed, TWRP
This guide has step by step instructions on how to install ADB and fastboot, unlock bootloader and Flash a ROM of your choice. Providing you follow the guide carefully, you wouldn't face any issues.
I have also posted a guide which is only intended to be an add-on to the guide posted by underlines. This means you should already have the recommended files downloaded and bootloader unlocked. using the guide above.
My guide uses a different version of MiFlash as certain Vendor ROMs are not compatible with the newer version. If you are unable to flash using the original guide above, you can also try following my guide. Guide to switch from Vendor ROM to EU ROM
But I would strongly recommend going through the guide posted by @underlines as you are new to flashing.
satishp said:
You can follow this guide compiled by @underlines : Guide: (17-01-09) Flash Global/China ROM, Root, gapps, Xposed, TWRP
This guide has step by step instructions on how to install ADB and fastboot, unlock bootloader and Flash a ROM of your choice. Providing you follow the guide carefully, you wouldn't face any issues.
I have also posted a guide which is only intended to be an add-on to the guide posted by underlines. This means you should already have the recommended files downloaded and bootloader unlocked. using the guide above.
My guide uses a different version of MiFlash as certain Vendor ROMs are not compatible with the newer version. If you are unable to flash using the original guide above, you can also try following my guide. Guide to switch from Vendor ROM to EU ROM
But I would strongly recommend going through the guide posted by @underlines as you are new to flashing.
Click to expand...
Click to collapse
Thank you i will follow the guide but just have one quick question. My phone is stuck on MI logo with mi.com written underneat. can i still have my phones bootloader unlocked?
Kithrae said:
Thank you i will follow the guide but just have one quick question. My phone is stuck on MI logo with mi.com written underneat. can i still have my phones bootloader unlocked?
Click to expand...
Click to collapse
Yes! You wont have a problem unlocking bootloader. Boot the phone into fastboot mode and check unlock status first. Instructions are clearly given in the guides and everything should go well providing you carefully follow the guide.
Ok i will now Wait for my bootloader unlock message. Thank you
Kithrae said:
Ok i will now Wait for my bootloader unlock message. Thank you
Click to expand...
Click to collapse
You fixed it once then broke it again make sure its charged properly before your next F-up, like everyone keeps telling no use pc-suite, it's fixable and a free lesson on android mobile. How would you even attempt changing roms without mi-flash and adb. I'm betting its already unlocked did you check?
satishp said:
Yes! You wont have a problem unlocking bootloader. Boot the phone into fastboot mode and check unlock status first. Instructions are clearly given in the guides and everything should go well providing you carefully follow the guide.
Click to expand...
Click to collapse
Finally got my unlock message and got my phone unlocked. thanks for all the help. But i'm a bit confused following the guide since i'm a noob and don't want to take risks again. First of all do i need to flash the Chinese ROM again before flashing EU rom? Secondly on step 4 of flalshing EU rom it says this:
"type
Code:
fastboot flash recovery C:\path\to\your\twrp-3.0.2-0-rc2-eu-lithium.img
change the colored path to the correct path to your twrp file (not the EU one) and press enter"
what does "(not the EU one)" means?
Kithrae said:
Finally got my unlock message and got my phone unlocked. thanks for all the help. But i'm a bit confused following the guide since i'm a noob and don't want to take risks again. First of all do i need to flash the Chinese ROM again before flashing EU rom? Secondly on step 4 of flalshing EU rom it says this:
"type
Code:
fastboot flash recovery C:\path\to\your\twrp-3.0.2-0-rc2-eu-lithium.img
change the colored path to the correct path to your twrp file (not the EU one) and press enter"
what does "(not the EU one)" means?
Click to expand...
Click to collapse
You can use the TWRP RC2. This version has been confirmed by many to work with both the Official stable and dev ROMS.
Some have experienced issues with touch functionality within TWRP using RC1.
RC2 is the way to go. If you have already flashed one of the official roms, if you'd like to flash the EU ROM, you can follow my guide. Providing you follow all steps correctly, you should be on EU ROM.
Cheers!
satishp said:
You can use the TWRP RC2. This version has been confirmed by many to work with both the Official stable and dev ROMS.
Some have experienced issues with touch functionality within TWRP using RC1.
RC2 is the way to go. If you have already flashed one of the official roms, if you'd like to flash the EU ROM, you can follow my guide. Providing you follow all steps correctly, you should be on EU ROM.
Cheers!
Click to expand...
Click to collapse
I haven't Flashed any ROMS yet and i don't know which one to Flash ATM. My phone got bootloop while flashing Chinese DEV from Chinese Stable. Should i flash any other ROMs before flashing "xiaomi.eu_multi_MIMix_7.1.12_v8-6.0.zip"?
Kithrae said:
I haven't Flashed any ROMS yet and i don't know which one to Flash ATM. My phone got bootloop while flashing Chinese DEV from Chinese Stable. Should i flash any other ROMs before flashing "xiaomi.eu_multi_MIMix_7.1.12_v8-6.0.zip"?
Click to expand...
Click to collapse
Flashing official ROM is not necessary if TWRP is working fine. Flash TWRP RC2 using fastboot, if touch is working for you, you can proceed copying the required files.
Follow my guide on this link.
If TWRP is working fine for you, you can follow from Step 6. If touch is frozen in TWRP, follow my guide from Step 1.
If TWRP works for you, when it prompts you to swipe right, make sure you flash the dm-verity and forced encryption disabler from the link I have provided, soon after you have swiped right to allow system modifications. If not you may face a bootloop.
Keep the guide open and follow the steps.
satishp said:
Flashing official ROM is not necessary if TWRP is working fine. Flash TWRP RC2 using fastboot, if touch is working for you, you can proceed copying the required files.
Follow my guide on this link.
If TWRP is working fine for you, you can follow from Step 6. If touch is frozen in TWRP, follow my guide from Step 1.
If TWRP works for you, when it prompts you to swipe right, make sure you flash the dm-verity and forced encryption disabler from the link I have provided, soon after you have swiped right to allow system modifications. If not you may face a bootloop.
Keep the guide open and follow the steps.
Click to expand...
Click to collapse
OK! i will try it as soon as EU rom downloads. i don't know how to thank all of you ^^
Kithrae said:
OK! i will try it as soon as EU rom downloads. i don't know how to thank all of you ^^
Click to expand...
Click to collapse
No worries! Hope you get it running! Glad to help!
Cheers!
[TWRP] MI 11 (Pro/Ultra) (mars/star)
WARNING : I do not know who made this TWRP and I am NOT taking credit for it. It was posted on eu site and I'm just sharing since there was no thread for twrp here on xda.
INSTRUCTIONS
1. Before starting the process, the bootloader must be unlocked.
2. Install Xiaomi USB drivers.
3. Enable Usb debugging from Settings - Additional settings - developer options.
4. Download TWRP for Mi 11 (Pro/Ultra) , and put it in your fastboot folder.
5. Put your phone into fastboot mode.
6. Rename downloaded file to "twrp.img".
7. Do the following command. It will automatically boot into TWRP.
Code:
fastboot boot twrp.img
8. If you get a screen asking for a pin, press 2nd option
and change language to English then enter phone pin.
9. Change language to English (press the 6th option).
10. Go to "Advanced" and select "Onekey inject TWRP".
11. Swipe to inject the TWRP. It might take a few minutes, so don't worry.
Note
1) Don't change the boot slot, currently (Slot A) for most or your device will not boot at all.
2) For user experiencing decrypt issue, you can try one of the methods below to enable decryption:
a. Remove all your security eg. fingerprint, face unlock, pattern and leave ONLY pin. Reboot to twrp and try again.
b. Reflash twrp.
c. LAST RESORT! Format data and factory reset your device then reflash twrp.
3. For user experiencing decrypt issue but just want to flash latest build:
a. Boot to twrp > mount > mount usb storage then transfer your rom.zip to data/media/0
b. Now go to install and look for rom.zip under data/media/0. Profit!
4. The decrypt issue was a bug on the Chinese twrp, no update since may so don't ask for an ETA.
CHANGELOGS
07/18/21
1) Additional instruction from scratch.
2) Additional note for people having decrypt issue.
CTTO: xiaomi.eu, hoangsang
Is the legit TWRP ?? Xiaomi.EU getting ready to push updates via TWRP? :'D
skylerfly16 said:
Is the legit TWRP ?? Xiaomi.EU getting ready to push updates via TWRP? :'D
Click to expand...
Click to collapse
Yes, They just did the new stable in TWRP Format.
The Chinese exe worked for me this morning but after I installed it the phone didn't want to boot and I got stuck in twrp for awhile
speedtripler said:
The Chinese exe worked for me this morning but after I installed it the phone didn't want to boot and I got stuck in twrp for awhile
Click to expand...
Click to collapse
Why did you install the Chinese exe?
skylerfly16 said:
Why did you install the Chinese exe?
Click to expand...
Click to collapse
The official one hadn't been released yet and I like a challenge sometimes
Hey, thx for bringing this to my attention, but i checked... root-access is gone... :/
deleted post
I keep getting a " no such partician " fail msg , what am I doing wrong here?
speedtripler said:
I keep getting a " no such partician " fail msg , what am I doing wrong here?
Click to expand...
Click to collapse
Your device is not connected, hence the empty list after adb devices.
Did you enable USB debugging in Developer options?
heinhuiz said:
Your device is not connected, hence the empty list after adb devices.
Did you enable USB debugging in Developer options?
Click to expand...
Click to collapse
Thx It's ok,I got it after a few attempts
The language on twrp still opens on Chinese and it needs changed to English each time but apart from that it seems to work fine!
SanHelios said:
Hey, thx for bringing this to my attention, but i checked... root-access is gone... :/
Click to expand...
Click to collapse
mine was revoked after i flash the latest stable, just download magisk23.apk then rename it to magisk23.zip and flash thru twrp, got my root back that way, cheers
innocence07 said:
mine was revoked after i flash the latest stable, just download magisk23.apk then rename it to magisk23.zip and flash thru twrp, got my root back that way, cheers
Click to expand...
Click to collapse
Is banking and payment apps still working?
Can you still pass safetynet check?
speedtripler said:
Is banking and payment apps still working?
Can you still pass safetynet check?
Click to expand...
Click to collapse
Yes and yes
Thanks, it works for me.
But each time i boot on TWRP, go back to chinesse language.
Can we do backup ? (and what can we backup) in case of something wrong in the future
sabrewulf said:
Thanks, it works for me.
But each time i boot on TWRP, go back to chinesse language.
Can we do backup ? (and what can we backup) in case of something wrong in the future
Click to expand...
Click to collapse
The recovery is fully functional as far as I can tell...
I did a complete backup successfully but I haven't tried to restore it yet
You click on everything ?
Hi,
after a long day of learning the hard way (got stuck in Fastboot Loop) I am now on stable EU 12.5.7 (MI11 Ultra, EU phone). So far so good, but I was wondering, how can I make TWRP stuck to the phone, meaning, when I push the power button to have an option like: Boot into TWRP. Is that possible or is there a "click this button with this... trick"?
ATM, I can only get TWRP to work, when I enable it via PC, which is not good.
I am asking, because I have an old Oneplus 6, which has this option. TWRP is installed and I can boot directly to it, if I want to.
Can you please help me out? Is there a trick or am I doing something wrong?
Greetings from Germany
Placebo
I believe you are on custom EU rom right? Just reboot into recovery, custom eu rom injects twrp as standard recovery
Hi, yes I am and I did that also. But still can't boot into TWRP from within the phone. Is there a trick after the injection?
Hey guys.. just updating you all
in all of my (previous ) test to get my patched boot.img
i've got this initial msg on my boot :
dm-verity corruption
your device is corrupt.
it can't be trusted and my not work properly.
press enter button to continue.
Or, device will power off in 5s.
(written in white)
NOW i tell that it didn't happen after bootloader unlock (so it was unlocked and all good no problem )
but honestly i don't remember if that happened when i tried to upload official rom through Miflash !
Anyway is there any way to remove this? I re installed ( clean install ) official Rom and it's still there, locked bootloader back and it's still there tried some
fastboot oem enable_dm_verity
i'm also warning new user that you might get this msg at boot !
thanks
forget this..i've got ROOT check the other thread !
How do you fix it?
simika said:
forget this..i've got ROOT check the other thread !
Click to expand...
Click to collapse
How did you managed to fix this?
by reading lol.. check the other thread all written
For reference to whoever that are confused about where to look for the solution.
ROOT GAINED !!!!
THIS METHOD WORKS on both: POCO M3 Pro / Redmi Note 10 5G hey guys.. wonderful news.. been trying here and there and IT WORKS FINALLY i gained root of POCO m3 Pro 5G ! i'll write in steps how it works and post all files i've been using...
forum.xda-developers.com
Download the vbmeta and flash it via fastboot to get rid of the dm-verify.
simika said:
by reading lol.. check the other thread all written
Click to expand...
Click to collapse
Could you reference a link or give me a little how to?
I tried a lot now:
- Installed a new Firmware trough Fastboot
- Using MsmDownload Tool
nothing helped so far.
So it would be great if you could assist in any way.
simika said:
Hey guys.. just updating you all
in all of my (previous ) test to get my patched boot.img
i've got this initial msg on my boot :
dm-verity corruption
your device is corrupt.
it can't be trusted and my not work properly.
press enter button to continue.
Or, device will power off in 5s.
(written in white)
NOW i tell that it didn't happen after bootloader unlock (so it was unlocked and all good no problem )
but honestly i don't remember if that happened when i tried to upload official rom through Miflash !
Anyway is there any way to remove this? I re installed ( clean install ) official Rom and it's still there, locked bootloader back and it's still there tried some
fastboot oem enable_dm_verity
i'm also warning new user that you might get this msg at boot !
thanks
Click to expand...
Click to collapse
I done everything but my phone doesn't unlock so now I have the dm-verity warning and I can't do a clean flash with Miflash. Also Miflash Unlock doesn't work. What I can do now?
if you can enter in fastboot mode, reflash stock boot and vbmeta
wetito said:
if you can enter in fastboot mode, reflash stock boot and vbmeta
Click to expand...
Click to collapse
How can I do? Miflash says:
error:Writing 'crclist' FAILED (remote: 'not allowed in locked state')
bro you have relock bootloader, this is a fatal error. the only way is try to unlock with an mtk tool that do this via pc. you can find on internet. search unlock all mtk devices. i think there a link also on xda
Just realized that the M3 thread, my phone is a M4.
.
@simika how are you sending this question?
1. Hello friends, there are two ways to fix this problem, first you need Root, I read your Root tutorial, your tutorial is very good, and after using Root, you need to download any file manager, give Root Permissions, you need to backup your baseband, nvram nvdata nvcfg backup and save, you also need an MTK Bypass, you can search for MTK Auth Bypass Tool through Google, you also need to use SP Flash to flash the machine, you need to download the official firmware package, which can be downloaded from xiaomirom.com , download the corresponding version, use SP Flash to read your firmware package, after the reading is completed, choose to format all and download, wait for completion, press the power button after completion, you will find that the error has disappeared, but the baseband is lost, But you have backed up. Boot through fastboot to unlock the BL lock, perform fastboot flash nvram ....... fastboot flash nvdata ....... fastboot flash nvcfg ....... Fastboot reboot reboot. Congratulations The baseband is back, I'm a novice, my instructions are not comprehensive, such as where is the baseband location, but I have too many characters, I will list the baseband location. 2. Replace a new motherboard, all mobile phone problems are all solve.
Hope to help you.
wetito said:
if you can enter in fastboot mode, reflash stock boot and vbmeta
Click to expand...
Click to collapse
Thanks. This worked on my Umidigi A11 phone.
xdadev_user11 said:
Thanks. This worked on my Umidigi A11 phone.
Click to expand...
Click to collapse
nice!
hello i got the same problem today, my phone is redmi9a can some help me regarding to this error ?
i had this problem even though i never unlocked my bootloader so i couldnt flash anything to fix it. but when i got the miui 13 update it fixed it for me
wetito said:
if you can enter in fastboot mode, reflash stock boot and vbmeta
Click to expand...
Click to collapse
What if you cant enter fastboot?
Hi all,
After multiple issues with this phone, I finally opt out and pass to Pixel 7 Pro.
So, i would like to know how to relock bootloader avoiding the problems of bootloop.
I've uninstall Magisk with option "complete uninstall".
I saw it's better to flash stock image before relock bootloader but how ?
Simply by flashing boot.img on the two slot OR flashing full.zip generated by Oxygen Updater OR other method ?
Thanks a lot for your help !
fma388 said:
Hi all,
After multiple issues with this phone, I finally opt out and pass to Pixel 7 Pro.
So, i would like to know how to relock bootloader avoiding the problems of bootloop.
I've uninstall Magisk with option "complete uninstall".
I saw it's better to flash stock image before relock bootloader but how ?
Simply by flashing boot.img on the two slot OR flashing full.zip generated by Oxygen Updater OR other method ?
Thanks a lot for your help !
Click to expand...
Click to collapse
+1 for leaving OnePlus lol
You need to do both, flash the boot.img, then flash the full zip from oxygen updater
And then after a full reset and full boot up you can relock the bootloader.
zopostyle said:
+1 for leaving OnePlus lol
You need to do both, flash the boot.img, then flash the full zip from oxygen updater
And then after a full reset and full boot up you can relock the bootloader.
Click to expand...
Click to collapse
This phone was promising on paper but the user experience was much less so...
Thank you for the answer !!
For the full zip of Oxygen Updater, I flash it with "fastboot flash full.zip" or how? (I've never flashed a full zip )
fma388 said:
This phone was promising on paper but the user experience was much less so...
Thank you for the answer !!
For the full zip of Oxygen Updater, I flash it with "fastboot flash full.zip" or how? (I've never flashed a full zip )
Click to expand...
Click to collapse
You can use the Local installation system, from the update screen and it that does not support use the OPLocalUpgrade app that Oxygen Updater provides.
zopostyle said:
You can use the Local installation system, from the update screen and it that does not support use the OPLocalUpgrade app that Oxygen Updater provides.
Click to expand...
Click to collapse
Ok thanks !
zopostyle said:
+1 for leaving OnePlus lol
You need to do both, flash the boot.img, then flash the full zip from oxygen updater
And then after a full reset and full boot up you can relock the bootloader.
Click to expand...
Click to collapse
Dear sir, i'm using Ne2213_11_C.30 (Newest Rom). Can u give me the Instructions to relock the bootloader (step by step). I don't know how to flash the boot.img. Thank so much.
hoaianh1505 said:
Dear sir, i'm using Ne2213_11_C.30 (Newest Rom). Can u give me the Instructions to relock the bootloader (step by step). I don't know how to flash the boot.img. Thank so much.
Click to expand...
Click to collapse
If you're on the latest rom there is no need to relock the bootloader
But if you want to, download this https://gauss-componentotacostmanua...23/03/21/b6cfe6d4ec4f4cf7bcb316891f9f8db9.zip
It's the full NE2213 C30 zip file.
Than download https://oxygenos.oneplus.net/OPLocalUpdate_For_Android13.apk
Intall it on you phone, It will show a new app Local Upgrade, using this tool you will install the above zip file.
After the installation complete, it's recommended to full wipe your device.
Than using adb and fastboot that you can download from here https://forum.xda-developers.com/t/tool-minimal-adb-and-fastboot-2-9-18.2317790/
plug you device into your computer
reset it to fastboot mode (turn off, hold power, vol + and vol - until the device start than release power button, once the screen shows the options you can release all buttons and choose fastboot mode if its not there)
on the command prompt type:
Fastboot flashing lock
And that's it.
zopostyle said:
If you're on the latest rom there is no need to relock the bootloader
But if you want to, download this https://gauss-componentotacostmanua...23/03/21/b6cfe6d4ec4f4cf7bcb316891f9f8db9.zip
It's the full NE2213 C30 zip file.
Than download https://oxygenos.oneplus.net/OPLocalUpdate_For_Android13.apk
Intall it on you phone, It will show a new app Local Upgrade, using this tool you will install the above zip file.
After the installation complete, it's recommended to full wipe your device.
Than using adb and fastboot that you can download from here https://forum.xda-developers.com/t/tool-minimal-adb-and-fastboot-2-9-18.2317790/
plug you device into your computer
reset it to fastboot mode (turn off, hold power, vol + and vol - until the device start than release power button, once the screen shows the options you can release all buttons and choose fastboot mode if its not there)
on the command prompt type:
Fastboot flashing lock
And that's it.
Click to expand...
Click to collapse
Thank you so much. Your advice's no need to relock the bootloader, i just worry about the information security. Eg: Banking app can work normal?
After updated to oxygen 13, my phone appear the warning: "phone has been unlocked and cant be trusted ..." each time i boot my device. How can i turn off this warning?
hoaianh1505 said:
Thank you so much. Your advice's no need to relock the bootloader, i just worry about the information security. Eg: Banking app can work normal?
After updated to oxygen 13, my phone appear the warning: "phone has been unlocked and cant be trusted ..." each time i boot my device. How can i turn off this warning?
Click to expand...
Click to collapse
There is no reason to worry about that warning. As your bootloader is not locked the only breach is that a user can manually flash another firmware.
But as he will not have the device on hand there is no problem.
My advice is to not relock, many users bricked their devices doing that.
Also everything works just fine, so no need to relock.
zopostyle said:
There is no reason to worry about that warning. As your bootloader is not locked the only breach is that a user can manually flash another firmware.
But as he will not have the device on hand there is no problem.
My advice is to not relock, many users bricked their devices doing that.
Also everything works just fine, so no need to relock.
Click to expand...
Click to collapse
Thanks for your helpful advice.