A few months ago, I upgraded to my phone to 7.1, and for some reason, my carrier disables tethering on my plan for this version. I did some poking around and found this article, which provided the fix. Namely:
setprop net.tethering.noprovisioning=true
settings put global tether_dun_required 0
The next issue I encountered was that these settings would be reverted any time I updated my ROM. Enter Magisk and stangri's tethering module, which addresses the first half of that issue flawlessly. I am, however, left with the second half of the puzzle that needs to be fixed after each flash.
I've tried placing a few simple lines in services.sh to perform a quick check to see what that setting's value is and adjust it as needed, I've tried putting scripts in various places to run on boot, and I've tried anything else I can think of, but it seems I'm not savvy enough to solve this particular problem on my own. So, I turn to you for suggestions. Can I either systemlessly set the value "tether_dun_required" to 0 via a Magisk module or use a Magisk module to place a script that'll run on boot and check the value? If it's even possible, can I get a hint on how it would be done? Thanks in advance.
You should be able to use the General Purpose Boot Scripts that @topjohnwu talks about here: https://forum.xda-developers.com/showpost.php?p=70897029&postcount=12.
Didgeridoohan said:
You should be able to use the General Purpose Boot Scripts that @topjohnwu talks about here: https://forum.xda-developers.com/showpost.php?p=70897029&postcount=12.
Click to expand...
Click to collapse
Hmm, yeah that has potential, but I suspect I'd run into the same problem I've encountered when putting the script into a module. Namely, it doesn't run. Maybe I'm missing something? For testing purposes, I've been keeping it to a single line with the actual command (settings put global tether_dun_required 0), but it doesn't actually do anything.
Hello, everyone.
Few days ago, I found Hanabank app (com.hanabank.ebk.channel.android.hananbank) detects Magisk hide. I ran strace against Hanabank app, and I got some suspicious openat(2) returns -EACCES and even some files are not filtered by Magisk Hide (returns file descriptor successfully)
Here are openat(2) calls which don't look good.
Code:
[pid 27855] openat(AT_FDCWD, "/sbin_orig/magisk", O_RDONLY|O_LARGEFILE) = 91
[pid 27855] openat(AT_FDCWD, "/dev/magisk/mirror/system", O_RDONLY|O_LARGEFILE) = -1 EACCES (Permission denied)
[pid 27855] openat(AT_FDCWD, "/magisk", O_RDONLY|O_LARGEFILE) = -1 EACCES (Permission denied)
[pid 27855] fstatat64(AT_FDCWD, "99-magisk.sh", {st_mode=S_IFREG|0755, st_size=2011, ...}, 0) = 0
Full strace log of Hanabank app:
Code:
https://pastebin.com/BUiViAbK
I think they should return -ENOENT to pass that magisk detection routine.
I'm using Magisk v14.0
BTW, why Magisk Github issue tracker is disabled?
Having the same issue but with another app.
https://forum.xda-developers.com/showpost.php?p=73968022&postcount=19348
How did you run strace? I used strace -f -p PID-o /sdcard/strace.txt but no reference to Magisk is shown.
olivercervera said:
Having the same issue but with another app.
https://forum.xda-developers.com/showpost.php?p=73968022&postcount=19348
How did you run strace? I used strace -f -p PID-o /sdcard/strace.txt but no reference to Magisk is shown.
Click to expand...
Click to collapse
First, sorry for late reply. I was on vacation.
I used this script to attach strace to fresh app process.
Code:
while true; do
while ! ps | grep -q -i $1; do :; done;
ps | grep -i $1 | while read a b c; do
strace -e open -f -e trace=file,ptrace -p $b 2>&1;
done;
done
For example, if you saved this script as /sdcard/strace.sh, The procedure I take to attach strace to the app is;
1. use killall command to kill all app process. Android pre-forks app, so we need to kill that first.
2. run script using sh /sdcard/strace.sh <app_process_name>. This will attach strace to the app and redirects strace's stderr output to stdout.
2-1. Do whatever you want (use tee or just redirect it to file, etc..) with stdout stream.
3. Analyze collected result.
That's all.
perillamint said:
First, sorry for late reply. I was on vacation.
I used this script to attach strace to fresh app process.
Click to expand...
Click to collapse
Hi
Just now I realised that I responded in the other thread. However your script never worked
I ran the script in a shell with root permission using
Code:
sh /sdcard/strace.sh com.barclays.android.barclaysmobilebanking
Unfortunately this is what I get when I try to run the script
Code:
/sdcard/strace.sh[5]: syntax error: 'done' unexpected
What have I done wrong?
EDIT: I've done this test on another device, a Nexus 5X stock 7.1.2 + Magisk v14. If I run strace it is not found, I have installed busybox but nothing! WAT??? I'll test with the other device later which has strace (Nexus 5).
EDIT2: Nope, I get the same error on the device which has strace.
olivercervera said:
Hi
Just now I realised that I responded in the other thread. However your script never worked
I ran the script in a shell with root permission using
Code:
sh /sdcard/strace.sh com.barclays.android.barclaysmobilebanking
Unfortunately this is what I get when I try to run the script
Code:
/sdcard/strace.sh[5]: syntax error: 'done' unexpected
What have I done wrong?
EDIT: I've done this test on another device, a Nexus 5X stock 7.1.2 + Magisk v14. If I run strace it is not found, I have installed busybox but nothing! WAT??? I'll test with the other device later which has strace (Nexus 5).
EDIT2: Nope, I get the same error on the device which has strace.
Click to expand...
Click to collapse
Hmm, I used sh which included in LineageOS.... I think Android's default sh couldn't handle that script's syntax properly. Default sh is quite crippled compared to GNU/Linux's one (bash, zsh, etc..)
Could you try running this script using bash instead of sh? If you don't have bash on your Android system, this Magisk module could inject bash binary into your system. https://forum.xda-developers.com/apps/magisk/module-magisk-bash-shell-t3609988
perillamint said:
Hmm, I used sh which included in LineageOS.... I think Android's default sh couldn't handle that script's syntax properly. Default sh is quite crippled compared to GNU/Linux's one (bash, zsh, etc..)
Could you try running this script using bash instead of sh? If you don't have bash on your Android system, this Magisk module could inject bash binary into your system. https://forum.xda-developers.com/apps/magisk/module-magisk-bash-shell-t3609988
Click to expand...
Click to collapse
Thanks for your suggestion. In the end I installed LOS on my test device and ran the script.
The funny thing is that I can't find a single reference to Magisk or Root...
The output is attached.
olivercervera said:
Thanks for your suggestion. In the end I installed LOS on my test device and ran the script.
The funny thing is that I can't find a single reference to Magisk or Root...
The output is attached.
Click to expand...
Click to collapse
Indeed. However the app dies shortly after reading the two property files:
/dev/__properties__/ubject_r:default_prop:s0
/dev/__properties__/ubject_r:logd_prop:s0
I would try to get the output of getprop with and without Magisk installed and see if there are any properties being leaked that could give a hint that Magisk is installed.
Fif_ said:
Indeed. However the app dies shortly after reading the two property files:
/dev/__properties__/ubject_r:default_prop:s0
/dev/__properties__/ubject_r:logd_prop:s0
I would try to get the output of getprop with and without Magisk installed and see if there are any properties being leaked that could give a hint that Magisk is installed.
Click to expand...
Click to collapse
You are the man! You definitely spotted the method being used by this app. Thanks.
I had to leave LOS ROM because even without Magisk it would not run, so I installed another ROM. I verified the app runs, got props, installed Magisk and got new props.
There are all changes:
1. [ro.build.selinux]: [1] is changed to [ro.build.selinux]: [0] when Magisk is installed
2. [ro.runtime.firstboot] shows different values but I believe it's fine
3. The following are entirely missing when Magisk is installed
[selinux.reload_policy]: [1]
[service.adb.tcp.port]: [-1]
[sys.retaildemo.enabled]: [0]
[init.svc.clear-bcb]: [stopped]
I have the feeling that [ro.build.selinux]: [1] and [selinux.reload_policy]: [1] are key elements and Magisk is not hiding them properly. I would suppose these elements show that SELinux is not enforcing anymore. I tried changing these values, but at reboot they don't change.
I know obviously Magisk does not enforce SELinux, but hides that got set to Permissive. System thinks that is enforcing, and using command getenforce i get as a result Enforcing, but Barclays (and possibly other apps) are reading that SELinux is not actually being enforced.
Interesting. Will post these finding in the main thread.
Do you have anything to add that could be helpful?
olivercervera said:
You are the man! You definitely spotted the method being used by this app. Thanks.
I had to leave LOS ROM because even without Magisk it would not run, so I installed another ROM. I verified the app runs, got props, installed Magisk and got new props.
There are all changes:
1. [ro.build.selinux]: [1] is changed to [ro.build.selinux]: [0] when Magisk is installed
2. [ro.runtime.firstboot] shows different values but I believe it's fine
3. The following are entirely missing when Magisk is installed
[selinux.reload_policy]: [1]
[service.adb.tcp.port]: [-1]
[sys.retaildemo.enabled]: [0]
[init.svc.clear-bcb]: [stopped]
I have the feeling that [ro.build.selinux]: [1] and [selinux.reload_policy]: [1] are key elements and Magisk is not hiding them properly. I would suppose these elements show that SELinux is not enforcing anymore. I tried changing these values, but at reboot they don't change.
I know obviously Magisk does not enforce SELinux, but hides that got set to Permissive. System thinks that is enforcing, and using command getenforce i get as a result Enforcing, but Barclays (and possibly other apps) are reading that SELinux is not actually being enforced.
Interesting. Will post these finding in the main thread.
Do you have anything to add that could be helpful?
Click to expand...
Click to collapse
If you use "resetprop ro.build.selinux 1" in a root shell, does the app start?
That will disappear at reboot of course, but it's easy to add to /magisk/.core/props to make it stick until Magisk is fixed.
Now, I don't think Magisk disables SELinux, why do you have it disabled?
Fif_ said:
If you use "resetprop ro.build.selinux 1" in a root shell, does the app start?
That will disappear at reboot of course, but it's easy to add to /magisk/.core/props to make it stick until Magisk is fixed.
Now, I don't think Magisk disables SELinux, why do you have it disabled?
Click to expand...
Click to collapse
Yes, Magisk changes SELinux to Permissive and hides this status.
Although my findings would be legit and those props should be hidden, in my Bank's case is not the issue.
I have discovered that if I uninstall Magisk Manager (but not uninstall root, just the app) my bank app works. However it does not work if I use "Hide Magisk".
Since the hidden app is called Unhide Magisk Manager, probably this app is looking for Magisk keyword.
For whatever reason when I run strace the app does crash and always reports that message (crash after reading prop).
I will post these findings in the support thread.
I don't know how to do it, but I would recompile Magisk Manager changing package ID and name, in theory should work.
I am having the same issue on my Galaxy S8 with the Barclays Mobile Banking app. I have tried using every option in Magisk but nothing seems to be working. In fact, the Barclays app actually asked for SU permissions when I first ran it which is odd to me.
Did anyone find a workaround for this? I read the posts in this thread but I am not savvy enough to understand all the codes and technical information written, so please excuse my ignorance in the matter. Is reverting to a completely stock ROM my only option at this point? I really need to start using this application as soon as possible.
Thank you.
Quick update guys!
The great Topjohnwu is working on a new update that includes a key feature for us: reinstalling Magisk Manager with a random package ID.
These changes are in his Github Repo. On this thread you can find unofficial versions of Magisk compiled from Github.
I have tested Magisk-v14.4-20171102-091345.zip: HELL IT WORKS!
In Magisk Manager: go to settings and you will have the option to reinstall Magisk Manager with a random package ID
Install Barclays from Play Store
Add Barclays to Magisk Hide
Open Barclays, it will behave correctly and will work!
This solves my problem, so I will be able to use the latest version of this app very soon (will wait for public beta).
On a side note, this update should als hide /Magisk partition, which was detected by @perillamint banking app, so might be worth trying it.
I have installed this Hanabank app (hopefully is the right one!) and added it to Magisk Hide. The app opens up correctly but I can't understand anything. I see some stuff moving on screen and on the upper left I see a lock icon (to login?)
If I don't add the app to Magisk Hide it shows an incomprehensible message and closes.
Hope you find this helpful.
Please see photos below.
@olivercervera
What are your exact steps? I installed the latest version from this thread, and added barclays to magisk hide, and then in settings, clicked in hide magisk manager. When I clicked in unhide magisk manager, it asked me for root permision for something with a random name, so I guess it worked, but I couldn't get the Barclays app to run. Is that a fresh install of your phone? I remember that if it detected your root once, it would be blocked forever, until you get a new ID. Did you call barclays to get your app working again?
On top of that, I clicked on hide magisk manager again, and now I can't unhide it, the app does nothing when I click on it... :crying:
Thanks for your help in any case, and thanks for the tip regading the new functionality!
mundodisco8 said:
@olivercervera
What are your exact steps? I installed the latest version from this thread, and added barclays to magisk hide, and then in settings, clicked in hide magisk manager. When I clicked in unhide magisk manager, it asked me for root permision for something with a random name, so I guess it worked, but I couldn't get the Barclays app to run. Is that a fresh install of your phone? I remember that if it detected your root once, it would be blocked forever, until you get a new ID. Did you call barclays to get your app working again?
On top of that, I clicked on hide magisk manager again, and now I can't unhide it, the app does nothing when I click on it... :crying:
Thanks for your help in any case, and thanks for the tip regading the new functionality!
Click to expand...
Click to collapse
Yes, a fresh start from a stock Nexus 5X I have at work. I did not register the app with my account during the test, all I needed to do was to get to the Welcome Screen: if Barclays detects root you don't get anything. Probably you need to reinstall Barclays App.
Once Magisk Manager is hidden with the new ID you can't go back to the original: you don't have any option. So if you still have it means there is a problem.
mundodisco8 said:
@olivercervera
What are your exact steps? I installed the latest version from this thread, and added barclays to magisk hide, and then in settings, clicked in hide magisk manager. When I clicked in unhide magisk manager, it asked me for root permision for something with a random name, so I guess it worked, but I couldn't get the Barclays app to run. Is that a fresh install of your phone? I remember that if it detected your root once, it would be blocked forever, until you get a new ID. Did you call barclays to get your app working again?
On top of that, I clicked on hide magisk manager again, and now I can't unhide it, the app does nothing when I click on it... :crying:
Thanks for your help in any case, and thanks for the tip regading the new functionality!
Click to expand...
Click to collapse
He's talking about a new Hide Manager feature that is much improved from the current implementation. It's not yet available officially, so you'll have to build yourself from the GitHub repo, or download from the unofficial snapshots thread that @olivercervera linked.
Didgeridoohan said:
He's talking about a new Hide Manager feature that is much improved from the current implementation. It's not yet available officially, so you'll have to build yourself from the GitHub repo, or download from the unofficial snapshots thread that @olivercervera linked.
Click to expand...
Click to collapse
I didn't even consider the possibility he didn't realise I was using the unofficial/self compiled version... I even linked it!!!
Thanks
olivercervera said:
I didn't even consider the possibility he didn't realise I was using the unofficial/self compiled version... I even linked it!!!
Thanks
Click to expand...
Click to collapse
It's actually quite apparent that he's talking about the current implementation, since the updated, unreleased, feature doesn't have anything named "unhide" to click.
With the new implementation you unhide the hidden Manager by reinstalling and opening it.
Hi guys,
Yes, I installed the latest version, following the link OliverCervera linked. I hid it using the usual method of going to options/hide magisk, and I got a new app, as usual. clicking on it to unhide prompted for root permissions for an app with a random ID (as expected). The next time, I wasn't that lucky, and the whole thing crashed. Anyway, it's a nightly, so I won't complain, and I will check it later, as sadly I don't have time to do it now.
In any case, my app was marked, because I opened it with the official release of Magisk and it detected root, and once it does, it keeps the "this phone is rooted" status until you do a factory reset. I think you can call them to tell them that it was a mistake, and they can unlock it but I'm not 100% sure about this last point.
Thanks for the work, anyway!
mundodisco8 said:
Hi guys,
Yes, I installed the latest version, following the link OliverCervera linked. I hid it using the usual method of going to options/hide magisk, and I got a new app, as usual. clicking on it to unhide prompted for root permissions for an app with a random ID (as expected). The next time, I wasn't that lucky, and the whole thing crashed. Anyway, it's a nightly, so I won't complain, and I will check it later, as sadly I don't have time to do it now.
In any case, my app was marked, because I opened it with the official release of Magisk and it detected root, and once it does, it keeps the "this phone is rooted" status until you do a factory reset. I think you can call them to tell them that it was a mistake, and they can unlock it but I'm not 100% sure about this last point.
Thanks for the work, anyway!
Click to expand...
Click to collapse
If you install the correct version of the Manager you won't have an unhide app after hiding the Manager. That's changed...
Your problem is probably that the unofficial Manager has a different signature, so it won't install over the official Manager. Solution: Uninstall the official Manager before installing the unofficial snapshot.
Have you tried just clearing all data for the app after it detects root? That usually works for an app that "remembers" root. But, I've never tested the app in question so...
Didgeridoohan said:
If you install the correct version of the Manager you won't have an unhide app after hiding the Manager. That's changed...
Your problem is probably that the unofficial Manager has a different signature, so it won't install over the official Manager. Solution: Uninstall the official Manager before installing the unofficial snapshot.
Have you tried just clearing all data for the app after it detects root? That usually works for an app that "remembers" root. But, I've never tested the app in question so...
Click to expand...
Click to collapse
I think they keep your signature and store it on their servers. Barclays is really focused when it comes to not allowing people to use their app on rooted phones, but as I said, I would need to double check. And I kind of get why they do it, as they went all the way to avoid to pay Android to use Android Pay and they developed their own platform to pay over NFC (not judging here, it's up to them if they think it's the best solution). At the end of the day, root is exploited through a security flaw, and "the bad guys could get your moneys", and even though they could display a message at launch that says "hey, you are rooted, the bad guys could get AAAALLL of the moneys, it's up to you" people would still want to sue them if they mess up... but it's funny that they allow you to get into the online banking web on a rooted phone, where the bad guys could see your password...
Hi Guys!
Recently I hope to use Tasker to do something automatically when the phone is turned on, but I found that Tasker can't start when my phone is turned on but locked.
So I wrote an Android app that uses the shell to enter the password at boot time, but even if I used DirectBoot mode(developer.android.com/training/articles/direct-boot) it still doesn't work.
So I tried to write a module using Magisk, and automatically entered the password when I booted. This time I raised succeeded.
I think there may be other people who have the same needs as me, so I do a function that can customize the password for others to use.
At first we need install AutoInputBootPinManager(github.com/ZeroingIn/AutoInputBootPinManager) to configure your PIN. The application needs to grant root privileges.
Next we download and install this module(github.com/ZeroingIn/AutoInputBootPin) and reboot phone to enjoy it.
If you have any questions, please submit an issue.
Thank you all.
Interesting idea.
There are several modules available that use a shell script UI, run through a terminal emulator, to change settings for the module. App systemizer, Unified Hosts Adblock, MagiskHide Props Config, Energized Protection, etc. Take a look at them for inspiration.
A couple of things:
An explanation of the command in post-fs-data.sh might be a good idea.
Code:
supolicy --live "allow untrusted_app default_android_service service_manager find"
And, why are you setting this prop? As far as I can tell that's for the app Brevent...
Code:
log.tag.BreventServer=DEBUG
Didgeridoohan said:
Interesting idea.
There are several modules available that use a shell script UI, run through a terminal emulator, to change settings for the module. App systemizer, Unified Hosts Adblock, MagiskHide Props Config, Energized Protection, etc. Take a look at them for inspiration.
A couple of things:
An explanation of the command in post-fs-data.sh might be a good idea.
Code:
supolicy --live "allow untrusted_app default_android_service service_manager find"
And, why are you setting this prop? As far as I can tell that's for the app Brevent(play.google.com/store/apps/details?id=me.piebridge.brevent&hl=en)...
Code:
log.tag.BreventServer=DEBUG
Click to expand...
Click to collapse
Thank you very much for your advice, I will try it. Any progress, I will be posted in this post.
The setting of this prop is my mistake, and you have carefully discovered this bug that I have not noticed.
Because I was a beginner to make the Magisk module, I didn't see the Magisk Module Template(github.com/topjohnwu/magisk-module-template) at first, so I wrote it with reference to the Privileged Api Booter(github.com/Magisk-Modules-Repo/magisk-privileged-api-booter).I will fix this problem right away.
ZeroingIn said:
Thank you very much for your advice, I will try it. Any progress, I will be posted in this post.
The setting of this prop is my mistake, and you have carefully discovered this bug that I have not noticed.
Because I was a beginner to make the Magisk module, I didn't see the Magisk Module Template(github.com/topjohnwu/magisk-module-template) at first, so I wrote it with reference to the Privileged Api Booter(github.com/Magisk-Modules-Repo/magisk-privileged-api-booter).I will fix this problem right away.
Click to expand...
Click to collapse
In that case you have a couple of more things to rectify. The first part I mentioned, about the post-fs-data.sh script is also from that module. So, I'm going to assume you do not need it for your purpose. I'd suggest removing that as well... And after you've done that, you should also go in and edit config.sh and change PROPFILE and POSTFSDATA from true to false, because you're not using them anymore. From the looks of it you're only using service.sh, so only LATESTARTSERVICE needs to be active.
Didgeridoohan said:
In that case you have a couple of more things to rectify. The first part I mentioned, about the post-fs-data.sh script is also from that module. So, I'm going to assume you do not need it for your purpose. I'd suggest removing that as well... And after you've done that, you should also go in and edit config.sh and change PROPFILE and POSTFSDATA from true to false, because you're not using them anymore. From the looks of it you're only using service.sh, so only LATESTARTSERVICE needs to be active.
Click to expand...
Click to collapse
You are right, I modified it with reference to the template.Thanks a lot.
Are you going to.update this at all?
I have a bug if you are...
I only have 1 pin... But all 3 fire... Since there's no way to stop them without deleting it from the script
Hey all, I use SELinuxModeChanger apk to set Permissive mode when my device (Xperia Z5Compact) starts.
I would like to use a Magisk module to do it instead. What is the best module (simple, light on resources) to do so?
I just need the device to start in Permissive mode and that's pretty much it.
I notice all the modules that do this were removed from Magisk repo.. why is that, stability issues?
Thanks.
Because it just takes a very simple boot script, something that a Magisk module is a bit of overkill for. To keep the Magisk repo somewhat uncluttered (it's still quite messy), the decision was made to remove all modules that were just too simple.
Why do you want to change to a Magisk module? It'll do the exact same thing as your app... If you really want to skip the app, just put the following inside a file (you can name it whatever, say "selinux", doesn't even need an extension), place it in /data/adb/service.d, give it execution permission and that's it:
Code:
#!/system/bin/sh
setenforce 0
That'll change to permissive at each boot. You could do the same with an app like Tasker, etc...
Very helpful if I need to do it manually, thank you very much!
I just found this module : https://forum.xda-developers.com/apps/magisk/selinux-mode-inverter-t3775271
which I think will do the trick nicely (I like to be able to enable or disable the feature easily from within Magisk).
Didgeridoohan said:
Because it just takes a very simple boot script, something that a Magisk module is a bit of overkill for. To keep the Magisk repo somewhat uncluttered (it's still quite messy), the decision was made to remove all modules that were just too simple.
Why do you want to change to a Magisk module? It'll do the exact same thing as your app... If you really want to skip the app, just put the following inside a file (you can name it whatever, say "selinux", doesn't even need an extension), place it in /data/adb/service.d, give it execution permission and that's it:
That'll change to permissive at each boot. You could do the same with an app like Tasker, etc...
Click to expand...
Click to collapse
Nice idea, I'm using it and loving it, thanks for the info.
Thanks for the ROM. Its very stable and smooth. But i faced with one issue after last update
Any gcam is crashing except for the stock(6.2) on Pixel Experience ROM (last update10.0)I tried different cases like clean cache, removed Google photo, install other gcam mods, change SElinux. Nothing helped me. Has anyone encountered anything like this? Any solution?
Hi Guys,
My Pixel 2XL "magically automatically" updated itself to Android 11, so I've been forced to migrate to the Canary build of Magisk
to get root back etc.
The problem I have, is that the modules are not being 'detected' despite being installed.
EG: Active Edge Mod for Pixel, module is installed in Magisk, but the app doesn't detect the installation.
Same for other Magisk modules.
I'm hoping its something simple I need to do to detect these, I've searched, but found no definitive answer.
Anyone have any suggestions? Or can point me to more info on canary?
Thanks in Advance!
I noticed v21 has been released, so I jumped back to the stable channel and updated app to 8.0.1, but strangely still have the same issue!
Modules aren't being detected.
I get the following error when I try to run energized in terminal;
/system/bin/energized[13]: .: /sbin/ .magisk/modules/energizedprotection/system/bin/setupFiles.sh: No such file or directory
You've got two rather special modules there, so they're hardly the benchmark for if things work or not.
For Active Edge Mod you're probably better of asking for help with the developer. And judging by that error the Energized developer also need to update their module, since that path no longer exists on A11 (and it's bad practise to hardcode the path like that anyway). You could edit the energized file in the module directly, to point to the correct path (check the module thread, I'm sure someone has brought this up already).
So, in conclusion: unless there are other more "normal" modules that doesn't work there's no issue and you need to contact the developers of these two modules so that they can fix them.
Thanks @Didgeridoohan, I wasn't aware that the paths had changed. That would explain a lot...
Out of curiosity, what would you consider a "normal" module? For testing purposes..
Cheers!
Thanks @Didgeridoohan, I wasn't aware that the paths had changed. That would explain a lot...
Out of curiosity, what would you consider a "normal" module? For testing purposes..
Cheers!
I always like @osm0sis' modules. They utilise the module installer scripts very nicely and pretty much always work (and if they don't something usually has gone horribly wrong).
Well, hijack the module installer scripts nicely.
Well, I do have @osm0sis BusyBox Magisk Module installed, but I think I read a tweet that TopJohnWu was incorporating a busybox binary in Magisk..
I can see that all of my Magisk modules (except Systemless Host) has a "folder icon with an i" on it. Can't find what that means.. and I get a blank screen when i press it.
Magisk has had Busybox integrated for ages... Lately it's become more usable for scripts and modules though. It's not exposed to the rest of the system like @osm0sis module is.
The icon you're seeing is the module readme. Click that and it should open in the window that you see.