Database Develop

Security update: ALE-L21C432B604/5 (Dual/Single SIM)

Doesn't seem to be EMUI 4.1, but it is an update nonetheless. Other phones have it worse.
- Dual SIM: (B604) - OTA and FULL
- Single SIM: (B605) - OTA and FULL
CHANGELOG:
This update improves system security with Google security patches.
[Optimizations]
Improved device security with Google security patches.
[Update notes]
1. This update will not erase your personal data, but we recommend that you back up any important data before updating.
2. If you experience any issues during the update, please call the Huawei customer service hotline or visit an authorized Huawei service center for assistance.
Click to expand...
Click to collapse
You can always find new updates with Huawei Firmware Finder, or on this page.
INSTALLATION:
OTA: You need to have stock recovery. you will extract the UPDATE.APP from the .zip and put that in a folder called "dload" in your phone's SD card. Now you can either:
Dial *#*#2846579#*#* in the stock phone app, and go Software Upgrade > SDcard upgrade or
Shutdown the phone, and then hold POWER, and both the VOL buttons until the EMUI update starts
FULL:
You can flash the update.zip in TWRP. It will show a small error but it's fine.
You can also extract the partitions boot, cust, system with Huawei Update Extractor (usage instructions in the forum) and flash with fastboot through an unlocked bootloader (HOW DO I DO THAT?)
If you have stock recovery you can extract the UPDATE.APP from the .zip and put that in a folder called "dload" in your phone's SD card. Now you can either:
Dial *#*#2846579#*#* in the stock phone app, and go Software Upgrade > SDcard upgrade or
Shutdown the phone, and then hold POWER, and both the VOL buttons until the EMUI update starts
NOTES:
By the way, you can try this method to get better ROMs on this phone. You can find ROMs for these devices that Huawei gives better updates to, and flash them with TWRP, but they may have stuff that doesn't work. E.g. CAM phones don't have NFC so you won't get NFC support with their ROM.

Isn't the ALE-L21C432 that is needed ?

Igl0 said:
Isn't the ALE-L21C432 that is needed ?
Click to expand...
Click to collapse
It's a typo. Anyhow the c432 refers to europe region i think. if your phone is not carrier locked you can install whatever region you want, not with the official method though, only fastboot or TWRP

I just hop in here to remind everyone that this ROM won't pass Safety Net at this time. You'll have to wait until it is releases officially. And that will be on the beginning of the next month.
Also: This is a leaked build, so it may not be final. Which means that this build may not include all security updates for August. Tbh I'm starting to think that this is all just fake news. The security patch from Google wasn't releases yet, it never is this early. Maybe Huawei is just making their customers think they got a supported device, but actually they are just changing one line in build.prop.

Vinnipinni said:
I just hop in here to remind everyone that this ROM won't pass Safety Net at this time. You'll have to wait until it is releases officially. And that will be on the beginning of the next month.
Also: This is a leaked build, so it may not be final. Which means that this build may not include all security updates for August. Tbh I'm starting to think that this is all just fake news. The security patch from Google wasn't releases yet, it never is this early. Maybe Huawei is just making their customers think they got a supported device, but actually they are just changing one line in build.prop.
Click to expand...
Click to collapse
That's not allowed... Google can release early security it patches only for some phones, and happily, it seems that our old p8 lite is with them.
@JpegXguy can you please give me the boot.img of b604? I would appreciate!

D1stRU3T0R said:
That's not allowed... Google can release early security it patches only for some phones, and happily, it seems that our old p8 lite is with them.
@JpegXguy can you please give me the boot.img of b604? I would appreciate!
Click to expand...
Click to collapse
Google releases universal security patches, but NOT this early. If it is releases already, you should be able to find it on the internet.

D1stRU3T0R said:
That's not allowed... Google can release early security it patches only for some phones, and happily, it seems that our old p8 lite is with them.
@JpegXguy can you please give me the boot.img of b604? I would appreciate!
Click to expand...
Click to collapse
The boot image is in the attached zip. I tried a ROM from the CAM-L21 phone, which gets EMUI 4.1 updates plus secutity patches. It's a good ROM but themes don't apply at all for some reason. Other than that it's fast and the small improvements of 4.1 are welcome

Vinnipinni said:
Tbh I'm starting to think that this is all just fake news. The security patch from Google wasn't releases yet, it never is this early. Maybe Huawei is just making their customers think they got a supported device, but actually they are just changing one line in build.prop.
Click to expand...
Click to collapse
Surely that's illegal right? And the OTA is like 120+ MB, I doubt it's just a line change

JpegXguy said:
Surely that's illegal right?
Click to expand...
Click to collapse
I think it is. But it wouldn't be the first time huawei doesn't stick to rules and laws. I just can't imagine that Google would release the security patch of August this early. There is still to much time until the month end and it gets released officially. There is still a lot of time for more exploits and whatever to show up. I don't think Google would do this.
Edit: I just did a little search, there was nothing on the internet. The latest is from July.

Vinnipinni said:
I think it is. But it wouldn't be the first time huawei doesn't stick to rules and laws. I just can't imagine that Google would release the security patch of August this early. There is still to much time until the month end and it gets released officially. There is still a lot of time for more exploits and whatever to show up. I don't think Google would do this.
Edit: I just did a little search, there was nothing on the internet. The latest is from July.
Click to expand...
Click to collapse
Same, i questioned Huawei about this, didn't gaved a clear response... And when ibguestioned again, they can't even respond xd but what illegal they did in the past?

D1stRU3T0R said:
Same, i questioned Huawei about this, didn't gaved a clear response... And when ibguestioned again, they can't even respond xd but what illegal they did in the past?
Click to expand...
Click to collapse
On the bright side, next RROS update might be stable enough for daily use

Hello there, I want to flash this ROM on P8 Lite, I m rooted & TWRP recovery 3.0.2.0 is installed. Currently I m on BalongC52B311. Is it ok to go ahead or may I be end up in Bootloop/Bricked. So plz respond.
Thanks

Khugiani said:
Hello there, I want to flash this ROM on P8 Lite, I m rooted & TWRP recovery 3.0.2.0 is installed. Currently I m on BalongC52B311. Is it ok to go ahead or may I be end up in Bootloop/Bricked. So plz respond.
Thanks
Click to expand...
Click to collapse
First of all, update TWRP. You can flash the full update.zip in TWRP, maybe you need factory reset though. try first without

Any way to root at 7.0 ? [solution found]

As in the title. I have an EVA-L09 running android 7.0 .
I am about to unlock the bootloader but from what I gathered on the forums here, anyone who proceeds with rooting on 7.0 either simply fails to do so or is stuck in a boot loop.
So: has anyone rooted on 7.0 and how did you do it?
Big thanks

The more important thing is what is your build number. I know for b38x and higher you need a twrp with loop support and flash able SuperSU with loop support. I'll post links later on how to do this.
I do have my phone rooted on nougat by the way.

benjamen50 said:
The more important thing is what is your build number. I know for b38x and higher you need a twrp with loop support and flash able SuperSU with loop support. I'll post links later on how to do this.
I do have my phone rooted on nougat by the way.
Click to expand...
Click to collapse
Yeah, sorry for not mentioning it before - it's b386.

Link
http://download.chainfire.eu/supersu-stable
Steps
Unlock BOOTLOADER
Install TWRP
Flash SuperSu via TWRP

I have B366.. do you have some procedure working?
Inviato dal mio EVA-L09 utilizzando Tapatalk

Okay, so, after shoveling through a huge amount of threads and then managing to comprehend what they say (I assume English wasnt the authors native language) I unlocked the bootloader, flashed TWRP and then Chainfire. Thanks to the corresponding posters anyway - I don't know if I would have been able to root properly without them.
I did NOT use the official versions of anything - neither SuperSU or TWRP:
Anyway, here are the threads I used:
https://forum.xda-developers.com/p9/development/root-supersu-2-81-emui-5-t3612258 (for SuperSU, 1st link works for 386, I picked permissive SE for older builds go to the second link section)
https://forum.xda-developers.com/p9/development/twrp-t3565703 (for TWRP, this seems to be specifically updated to work on all P9s)
I had no issues during the whole process. As for the bootloader code, I had to contact Huawei support as they give out the codes freely without any nonsense (just had to wait 1 working day).
Also - HRK tool as far as I could tell ISN'T recommended on newer builds. If you use it, you run a huge risk of soft bricking your phone - it uses outdated versions of everything and that's why it breaks peoples phones.

How did you unlock your bootloader ?

Robert- said:
How did you unlock your bootloader ?
Click to expand...
Click to collapse
Used
Code:
fastboot oem unlock codehere
Got the code from Huawei support, you can email them and they're required to give you the code. Took a day to get it from support where I live but thats understandable as I contacted them at the end of a working day.

Can you (please,please) give me a full tutorial ?
Like,what do I need? ADB ? How do i set everything up?
How do I start my phone in fastboot?
I am kinda a noob when it comes to doing stuff manualy..

Moto E5 XT1920-15 (PETTYL) unlock bootloader)root/flashing GSIs

Deleted

bubba1601 said:
Hi
I have this new device but it's not any of the versions listed here (Nora/Rhyanna)
It's the UK version XT1920-15 sim unlocked, I'm just wandering if the steps to unlock/root are the same on this device as the other versions?
Click to expand...
Click to collapse
https://www.getdroidtips.com/unlock-bootloader-moto-e5-play/
I used this guide to unlock it. I also have this phone, but mine is from latin america, and it should work for yours. :good:

Deleted

bubba1601 said:
Your device is not the same.
The American / latin American version has android 8.0, 2 GB ram and a 5.2 inch screen.
The UK version has android 8.1, 1gb of ram and a 5.3 inch screen.
All such tutorials that work for the US version DON'T work on the UK version and TWRP installation fails completely.
Please be mindful when advising users things "should" work, as it doesn't work and your device is completely different to mine, so should not be attempted from that link.
Click to expand...
Click to collapse
No my phone has 1Gb of Ram and 16gigs of storage space along with 8.1 and TWRP installed. I used that guide to unlock the bootloader the TWRP in that guide doesn't work for our phones. I managed to find the TWRP version of the phone.

Deleted

bubba1601 said:
The guide says it's for android 8.0 though?
I still can't unlock the bootloader!
Click to expand...
Click to collapse
fastboot oem get_unlock_data
"Now command will return a string which you need to copy the string to a notepad with a single line by deleting all spaceNotepad
(Note: Only copy the highlighted sections above. Do not copy the INFO or (bootloader) prefix)"
"To Get Bootloader Key for Moto E5 Play - Open the website Motorola’s unlock the bootloader site by Signing up or Log in in via Google Plus account"
Link:https://accounts.motorola.com/ssoau...ct/standalone/bootloader/unlock-your-device-b
Make an account, also check if your device can even be unlocked on the website.
"Once you click the "Can my Device be unlocked?" you will receive a mail with unlock key.
Now copy the unlock key and type the following command and enter.
fastboot oem unlock UNLOCK_KEY
Here UNLOCK_Key is the place where you have to paste the unlock key which you copied from the email.
That's it! Your device will unlock. hah! Have fun!"
That's how you unlock the boot loader
Link for TWRP for PETTYL:https://mega.nz/#!anwAACZT!MJ95FCiIDH-kkLaZLpFvnKT5j_3Fe2goU-aZmSVeCKo
I couldn't find on XDA so I uploaded it to mega.

Deleted

Here a twrp buckup Twrp image and rooted boot for XT1920-15 if you manage to boot into twrp or try booting boot image https://drive.google.com/drive/u/0/mobile/folders/1P0yVep9l3yTN2Hzy7QiRXj3kuL_N7Dxz?usp=sharing

did the op get it sorted

Deleted

bubba1601 said:
I'm running stock again.
No root, no twrp and as far as I'm concerned, project treble ROMs/images are complete waste of time, especially for this device where half the posted steps don't work, supplied resources don't work or twrp images and twrp back ups supposedly for this device don't work
Worse still, I had to pay to redownload my firmware.
Click to expand...
Click to collapse
No idea why it dosent work for you I maneged to flash twrp and root it with magisek also tried linege and ResurexionRemix it works fine only xposed dosent work

Deleted

plscotland said:
Here a twrp buckup Twrp image and rooted boot for XT1920-15 if you manage to boot into twrp or try booting boot image https://drive.google.com/drive/u/0/mobile/folders/1P0yVep9l3yTN2Hzy7QiRXj3kuL_N7Dxz?usp=sharing
Click to expand...
Click to collapse
Can I flash this Recovery to XT1920-16 pettyl?
The file Moto_E5_XT1920-15-recovery.img is TWRP or STOCK recovery?
Also i'm loocking for Stock recovery for XT1920-16

Deleted

I just build custom recovery for pettyl -- ORANGE FOX , download at orangefox.tech
thanks. enjoy!
~whodat aka flash

Deleted

bubba1601 said:
There's already three different TWRPs for PETTYL.....two work one doesn't.
I made a TWRP for pettyl and it works 100% , The reason the others do not work is because they have EXT4 filesystem set to data partitions in the fstabs they were made with. Data partition is set to f2fs and thus it cannot be read. I also made a decrypt.zip for pettyl aswell, and I do not even own this device... I have only dove into android dev less than 2 months ago
Many people are already confused about twrp so do we really need another one to confuse everyone even more?
Click to expand...
Click to collapse
*triple facepalm* are you serious ?!?!
Maybe this site and android modifications is not for you bubba.
---------- Post added at 12:44 PM ---------- Previous post was at 12:32 PM ----------
bubba1601 said:
The comment you quoted says it's a TWRP file and I've not seen the stock recovery available for PETTYL .
Just bear in mind that I'm assuming the xt1920-15 that I have and txt1920-16 you have are identical, but I obviously cannot confirm that or do I know if they work the same I'm just assuming they do.
Click to expand...
Click to collapse
lol to get stock recovery file all you have to do is fastboot boot TWRP or OrangeFox and make a backup of recovery. Its that simple, but what would anyone want with stock recovery anyway?
If you really want it you can get the full stock firmware here, extract it and you will have stock recovery.img along with stock boot.img and everything else....
https://mirrors.lolinet.com/firmware/moto/pettyl/official/
Again, ENJOY!

Deleted

bubba1601 said:
If you had explained what's better or different about your recovery rather than making a mocking reply I would not have asked if another custom recovery was necessary......
There's currently two working TWRPs for PETTYL and another posted on here that doesn't work at all.
Every PETTYL user that's posted here has had issues with both TWRP versions or have been unable to follow the instructions on how to install either version.
Don't tell me this site and android modding isn't for me, because when the time is right I'll decide to stop, you will not make that decision or suggest I stop because you didn't like my question - which you didn't answer.
So I'll ask you calmly and politely again.
Is it really necessary to have so many different TWRPs and custom recovery for PETTYL?
What does your orange fox offer different to TWRP?
You haven't even posted a proper link......no explanation, no proceedures, no instructions. Nothing.
Explain yourself so people understand, don't mock.
Edit.
My question was not a criticism of what you have done.
I've stopped any further modifications to my own PETTYL because it's obvious a 1gb ram android go device cannot handle 9.0 pie and in the 10 years I've been modding various devices the E5 play is the most complicated piece of S*** I've I've used.
But even worse, if the user base cannot ask a simple question of people without someone like you being rude and sarcastic in reply and telling a fellow user to go away - then I've made the right decision not to work with my E5 or this thread any longer.
The user and support base for the E5 play PETTYL has suddenly hit an all time low, and doesn't need rudeness or your sarcasm to justify its existence..
Click to expand...
Click to collapse
He explained y other recoveries had prob and y his wouldn't next it has added features such as built in magisk and etc. test it to see other extra features instead of being a lil upset and taking it out on ppl being nice and fixing ur recovery probs

bubba1601 said:
If you had explained what's better or different about your recovery rather than making a mocking reply I would not have asked if another custom recovery was necessary......
There's currently two working TWRPs for PETTYL and another posted on here that doesn't work at all.
Every PETTYL user that's posted here has had issues with both TWRP versions or have been unable to follow the instructions on how to install either version.
Don't tell me this site and android modding isn't for me, because when the time is right I'll decide to stop, you will not make that decision or suggest I stop because you didn't like my question - which you didn't answer.
So I'll ask you calmly and politely again.
Is it really necessary to have so many different TWRPs and custom recovery for PETTYL?
What does your orange fox offer different to TWRP?
You haven't even posted a proper link......no explanation, no proceedures, no instructions. Nothing.
Explain yourself so people understand, don't mock.
Edit.
My question was not a criticism of what you have done.
I've stopped any further modifications to my own PETTYL because it's obvious a 1gb ram android go device cannot handle 9.0 pie and in the 10 years I've been modding various devices the E5 play is the most complicated piece of S*** I've I've used.
But even worse, if the user base cannot ask a simple question of people without someone like you being rude and sarcastic in reply and telling a fellow user to go away - then I've made the right decision not to work with my E5 or this thread any longer.
The user and support base for the E5 play PETTYL has suddenly hit an all time low, and doesn't need rudeness or your sarcasm to justify its existence..
Click to expand...
Click to collapse
Don't be a d*$k lashing out at a dev who does this work FOR free using up HIS free time to make it possible for you to make this complaint. We developers have to research to gain this knowledge. Be courteous and try to search the web to find the answers you seek and to fill in the blanks. Possibly guide others users in the right direction based on the knowledge you discover.
Don't bite the hand that feeds you. Listen to some nine inch nails, you might learn a thing or two about how to properly human.
He doesn't even own that device yet goes out of his way to provide support for it just for ungrateful individuals such as yourself to lash out at him for not explaining things clearly enough. If you lack the knowledge to fill in the blanks that he may have missed, that just shows that you're at risk of bricking your device from lack of knowledge on the subject. It won't hurt you to do a bit of research for yourself.
Sincerely,
The guy helping to guide that developer you lashed out at to supporting 64bit for YOUR DEVICE.

[Unlock Bl] [TWRP] Guide To Unlock Bootloader Of Meizu Pro 7 (p25)

Note:- Credits To this guide goes to {Diablosss}
GUIDE FOR UNLOCKING BOOTLOADER OF MEIZU PRO 7
(Sorry for the inconvenience, but there are some issues in posting pictures. Therefore requesting you to please check the attached files for images)
This guide can also work with many other Meizu devices. Checked on 15, 16 all options (s, t, x) and on Pro7​I post the archive and instructions in pictures.
Step 1: Download. Unpack. Run meizublunlocker.exe
meizublunlocker:-https://drive.google.com/open?id=1yEm_vZo4rsqEtii279AU6l1mBajiSPQ2
See Image 1 in Attachments.
Step 2:-We connect the phone to the computer in fastboot mode (hold down the Vol. Down and power buttons), click refresh. The program must identify the device.
See Image 2 in Attachments.
Step 3ress CheckBL to check bootloader status.
See Image 3 in Attachments.
Step 4:-Click the Create Request button. This will create a file with the end of req.dat in the folder with this program
We send it to the e-mail [email protected] and wait for the response file to unlock the bootloader.
(This takes usually 1 week to receive the unlocked file, but you can donate to get the file within 3 hours)
See Image 4 in Attachments.
Step 5:- After we received the unlock file with the end of res.dat, click UnlockBL and select the resulting file.
See Image 5 in Attachments.
If the file is correct then get this answer
See Image 6 in Attachments.
That's It. We successfully Unlocked the Bootloader.
Now the next thing is to install the TWRP in our Device. ( Further credits goes to{ sergpolov} )​
Step 1: Download and install "adb_run"
adb run:-https://drive.google.com/open?id=1y4wdL53-P7mybKsj5XeimHRoMSpokMkQ
Step 2:- Download the required Files.
Stock Recovery Pro 7:-https://drive.google.com/open?id=1e2tRdqLi5jsT8J854RMcIA-jvZyR7xhT
Twrp Pro 7:-https://drive.google.com/open?id=1uYOT9HGractYuoJvRidgAgh8IBLhzFtu
Step 3:-We load the phone into fastboot mode, flash through the fastboot the recovery you need.
Launch the application shortcut
Step 4:-Click "3" - go to fastboot mode
See Image 7 in Attachments.
Step 5:-Click "3" - recovery
See Image 8 in Attachments.
Step 6:-Here we select the recovery file: - in the window that opens, we throw the file itself and close the window with the file and press any button.
See Image 9 in Attachments.
The process has begun.
See Image 10 in Attachments.
Step 7:- Choose "Y" and "Enter"
See Image 11 in Attachments.
The recovery firmware process is over!
Next Few Steps are Extremely Important , so follow with caution!​Step 8:-Reboot into Recovery Mode(hold down "Power" and hold, as soon as the screen goes blank, hold down the second button "Volume +" - hold it until vibration and release "Power", and after it release the button "Volume +")
Step 9:-To disable encryption of the "Data" section (who installs TWRP), we immediately flash the zip archive - tool-root_unlock-Testing-Pro7.zip
(disables encryption of the "Data" section, disables Boot and Recovery checks, installs Magisk and disables system root) and reboot into the system.)
tool-root_unlock-Testing-Pro7.zip:-https://drive.google.com/open?id=1a3Gyyuoo2Jv3EN7EWPwj389tXorSwkxT
Attention ! When installing custom recovery (TWRP) on your device, for the full TWRP functionality, you should format the internal memory (Data section) of the device using TWRP itself, since the "Data" section on Meizu smartphones is encrypted, I highly recommend it before installing custom recovery , on creating backups using the internal Flyme firmware (after creating the backup, it is located in the "backup" folder of the internal drive), as well as copying all the necessary data from the phone’s internal memory to the computer!
NOTE:-No One shall be responsible to any damage ocurring to your device

Doubts and queries are welcomed .

Hi, but doesn't this only work on Qualcomm processors? How does it work on a Meizu Pro 7 which is a Mediatek? I tried it on my Meizu M5C and it doesn't work.

XRed_CubeX said:
Hi, but doesn't this only work on Qualcomm processors? How does it work on a Meizu Pro 7 which is a Mediatek? I tried it on my Meizu M5C and it doesn't work.
Click to expand...
Click to collapse
Yeah you r right and this guide is also taken from meizu 16th only, but this is tested now because qualcomm devices requires port_traces.txt and unlocked bl.bin files whereas for pro 7 we are using to res.dat which uses fastboot driven commands only.. Thats why it got successfull. I am also posting pictures for proof. (Shared by diabloss).

adityadhage said:
Yeah you r right and this guide is also taken from meizu 16th only, but this is tested now because qualcomm devices requires port_traces.txt and unlocked bl.bin files whereas for pro 7 we are using to res.dat which uses fastboot driven commands only.. Thats why it got successfull. I am also posting pictures for proof. (Shared by diabloss).
Click to expand...
Click to collapse
But then for other MTKs like M5C it will never work?

XRed_CubeX said:
But then for other MTKs like M5C it will never work?
Click to expand...
Click to collapse
i know you have already tried this method with your device and it didnt worked. I am not sure that m5c will get another method in future or not. Bcoz we also got lucky with pro 7 that it got successful by the help of guide ported from Meizu 16TH a Qualcomm device.

its now per donation only.

spiramedia said:
its now per donation only.
Click to expand...
Click to collapse
i am not sure about this but yeah 5$ is not a big cost for this. Like sincerely there is no other verified method to work and unlocking bootloader gives u many advantages. You can have magisk now and various other thing . You can directly flash service firmware now by flash tool. Custom roms are also there. Like 5$ dollars for a mediatek device is reasonable.

In this TWRP, could we install anny official ROM (Global or Chinese) in it's standard form (update.zip)? Or some file modification in the zip archive is required?

cris2d2 said:
In this TWRP, could we install anny official ROM (Global or Chinese) in it's standard form (update.zip)? Or some file modification in the zip archive is required?
Click to expand...
Click to collapse
Some users reported that they can directly install the official update zip. But i would recommend you to modify the updater script before flashing. You can request your firmware to make it TWRP flashable we can help you with this.

adityadhage said:
Some users reported that they can directly install the official update zip. But i would recommend you to modify the updater script before flashing. You can request your firmware to make it TWRP flashable we can help you with this.
Click to expand...
Click to collapse
Well, it would be nice if some very talented enthusiast developer or team of devs would build a custom ROM based on Android 8 or higher (if it's possible, of course).
I saw there is single custom ROM, AOSP, but it's still based on Nougat, like stock Flyme. This makes it uninteresting for me, because it brings nothing new over already very-good-full-of-options Flyme ROM based on Android 7.0.
Maybe time will bring us custom ROMs based on a newer Android, at least Oreo.

cris2d2 said:
Well, it would be nice if some very talented enthusiast developer or team of devs would build a custom ROM based on Android 8 or higher (if it's possible, of course).
I saw there is single custom ROM, AOSP, but it's still based on Nougat, like stock Flyme. This makes it uninteresting for me, because it brings nothing new over already very-good-full-of-options Flyme ROM based on Android 7.0.
Maybe time will bring us custom ROMs based on a newer Android, at least Oreo.
Click to expand...
Click to collapse
theoretically its not possible to update android version.. Because we dont have the source code to develop a higher version kernel .. But still there is a hope to port a rom based on android 8 but cant sure for stability.

adityadhage said:
theoretically its not possible to update android version.. Because we dont have the source code to develop a higher version kernel .. But still there is a hope to port a rom based on android 8 but cant sure for stability.
Click to expand...
Click to collapse
I remember that Lenovo P2 smarthone officially stopped at Android 7 but people could install different custom Oreo, Pie and Q ROMs. This means that Lenovo published the source code?

cris2d2 said:
I remember that Lenovo P2 smarthone officially stopped at Android 7 but people could install different custom Oreo, Pie and Q ROMs. This means that Lenovo published the source code?
Click to expand...
Click to collapse
Lenovo P2 is a snapdragon device. The source code and device tree can be found easily. Unlike mediatek , snapdragon never hides such things that's why the development is high on SD devices. Mediatek released kernel sources till Helio p10 then never disclosed anything. For higher android version roms we have to port kernel to higher version. Meizu pro 7 is right now on 4.4.15 kernel ver. For higher version we need kernel of 4.4.15+. I hope i cleared your doubts.

adityadhage said:
Lenovo P2 is a snapdragon device. The source code and device tree can be found easily. Unlike mediatek , snapdragon never hides such things that's why the development is high on SD devices. Mediatek released kernel sources till Helio p10 then never disclosed anything. For higher android version roms we have to port kernel to higher version. Meizu pro 7 is right now on 4.4.15 kernel ver. For higher version we need kernel of 4.4.15+. I hope i cleared your doubts.
Click to expand...
Click to collapse
So, it's all about the source code, kernel sources and so on.
From my point of view (and my knowledge), there are two major steps or two issues that need to be addressed to successfully develop ROMs and kernels for a phone:
1. As you said, the source code must be released publicly.
2. The bootloader must be unlocked (or easy to unlock), for all these mods and kernels to be installed through a custom recovery (IF a custom recovery is developed).
Please correct me if I'm wrong (I'm seeing these things from consumer/user point of view, not like a programmer/developer/coder).

cris2d2 said:
So, it's all about the source code, kernel sources and so on.
From my point of view (and my knowledge), there are two major steps or two issues that need to be addressed to successfully develop ROMs and kernels for a phone:
1. As you said, the source code must be released publicly.
2. The bootloader must be unlocked (or easy to unlock), for all these mods and kernels to be installed through a custom recovery (IF a custom recovery is developed).
Please correct me if I'm wrong (I'm seeing these things from consumer/user point of view, not like a programmer/developer/coder).
Click to expand...
Click to collapse
basically you are right

Thanks for your work. I got the Pro 7 X30 Variant. Anyone tried the guide for this version? Maybe i will try it anyways.
Cheers

deathbreath2010 said:
Thanks for your work. I got the Pro 7 X30 Variant. Anyone tried the guide for this version? Maybe i will try it anyways.
Cheers
Click to expand...
Click to collapse
this guide is now updated and guranteed to work with x30 also
follow this
https://www.youtube.com/watch?v=Rnuf-uNBnYA&t=319s

adityadhage said:
i am not sure about this but yeah 5$ is not a big cost for this. Like sincerely there is no other verified method to work and unlocking bootloader gives u many advantages. You can have magisk now and various other thing . You can directly flash service firmware now by flash tool. Custom roms are also there. Like 5$ dollars for a mediatek device is reasonable.
Click to expand...
Click to collapse
its not 5$ its now 15$ its too mutch

sajib_ngage said:
its not 5$ its now 15$ its too mutch
Click to expand...
Click to collapse
try asking them for lower price, they will help u i think. Tell them its for pro 7 bcoz pro 7 requires less work. try ur luck

[2022][ROOT] [Extreme Syndicate] [G960U/U1/W][G965U/U1/W][N960U/U1/W]

Info For U Model Bootloader Unlocking Can Be Found
[Android][UNSAMLOCK] Bootloader Unlock for Samsung US/Canada Devices
This thread is @svetius approved Important notice: Do not update to April 2023 security update (XXXXXXXXXXWCX) or later. Examples: G998USQS6EWCA, N986USQU4HWD1. Samsung has patched the bootloader unlock again on those updates. NOTE: The OneUI...
forum.xda-developers.com
Below US snapdragon devices can be bootloader unlocked with above service as long as bootloader version meets below criteria. Bootloader version can be determined from the 5th character from the right on the baseband version or build number, in some cases from kernel version
Below Method is no longer supported if you choose to use the unstable method below you do so on your own
This method is brought to you entirely by @elliwigy He is the reason for this exploit and method.
With that being said, Extreme Syndicate Root is now available!
Before Starting This Process Get A USB2 Mini Hub You Are Most Likely Going Too Need It​
EXTREME SYNDICATE ROOT METHOD
​OEM Toggle Does Nothing On US Model Phones
This root method breaks things and most likely will not be able to be used as a daily driver
You can be on any version bootloader. This will update you to V9 bootloader
This method will work if you are on Android 10 or Android 9 Pie but will put you on Android 8 Oreo. There is no root for Android 10 or Android 9 Pie
You will not be able to use magisk
You will not be able to flash full custom rom like Lineage or any other AOSP roms however GSI system images can be used
You cannot flash custom boot images or recovery images such as regular TWRP
Odin does not work on some later computers with USB 3.1 chip controllers the only work around is using a USB 2.0 mini hub
It is your responsibility to make sure you can use adb properly
Root will break things such as safetynet so deal with it
Disclaimer:
The Extreme Syndicate team and it's affiliates are not responsible for your actions or your device if any issues are to arise. You flash this and utilize these files at your own risk. You have been warned!
Notes:
- Safestrap recovery is now available with working MTP while in Safestrap
- This does NOT trip KNOX so don't ask.
- Bootloader is of course still locked.
- This uses some partitions from combo firmware which means 80% battery.
- Each variant will have its own post in its own download section. Download the right stuff!
* Variants this should work on are: N960U/U1/W, G965U/U1/W, G960U/U1/W. If you do not have one of these variants then this forum is not for you!
- Initial files/method will leave you on Oreo stock root.
- It works on latest rev's from rev1 up to the most recent revs.
- As of the initial first release, all variants have an issue with MTP not working except while in Safestrap
- S9 and S9+ also might have some issues with the selfie cam.
- Note 9 @elliwigy
- S9+ @klabit87
- S9 @jrkruse
- Telegram Support Group for All 3: https://t.me/joinchat/DxwvAlhtzHjg4EI9973BGQ
Anything here with a .7z extension will get unzipped before using
Anything here with a .zip extension will get flashed as a zip in safestrap
Anything here with a .tar or .md5 gets flashed in odin
Anything here with a .img extension gets flashed as image in safestrap
Downloads S9 Files:
Safestrap_S9_Cmd_Line.7z
Download S9+ Files:
Safestrap_S9_Plus_Cmd_Line.7z
Download Note9 Files: -- Only For Bit 8 Or Lower
Safestrap_N9_Cmd_Line_Bit8.7z
Instructions to Inject Safestrap:
1. Download and unzip Safestrap_S9__Cmd_Line.7z for your device
2. Plug phone into computer and run Safestrap.exe
3. Follow instructions on screen to enable USB Debugging
4. Then from there the process will be mostly automatic just follow prompts on screen
5. When done flashing BootSwap file you need to hold the buttons to boot to recovery but since we swapped boot and recovery images it will boot system.
Instructions For Flash Rom:
1. Download below files and copy files for rom to phone system img and vendor img and odm zip
Downloads S9 Files:
Stock_Rom_G960.7z
GSI_Rom_G960.7z
Download S9+ Files:
Stock_Rom_G965.7z
GSI_Rom_G965.7z
2. In safestrap flash system img then vendor img and odm zip .
3. Choose data wipe and advance and check data
4.. Now reboot system you will have to hold buttons to reboot to recovery until you see safestrap splash then click continue. You must do this on every reboot. If you do not it will reboot to stock recovery. If it reboots to stock recovery just reboot system and hold buttons to reboot to recovery again.
5. When rom is booted up your computer will not recognize the phone for mtp file transfer. Adb does still work so you can transfer stuff that way (you need to switch to ptp transfer method in the dropdown) or use USB adapter and use a thumb drive.
6. Biometrics do not work so don’t try to setup fingerprint or face recognition.
The GSI rom mtp works GSI rom is rooted already just flash phhsupersu.apk found in GSI_Rom zip
If using other GSI roms you have too choose A_Only ones and will probably need to flash the Sh_Remover.zip found in the GSI_Rom zip
ShoutOuts:
@elliwigy For the method and help and everything else
@klabit87 - Ditto
@me2151 - Ditto
@gsm-CHEN - Ditto
@mweinbach - For always posting my achievements on the XDA News portal as well as giving me someone to troll sometimes when bored.
@ShaDisNX255 - He was our best tester, give him credits for testing out GSI as well!
@everyone else I am forgetting!
ENJOY!

Mine

Wow, this is actually pretty good. S9 Snapdragon + treble enabled device? Man, this is going to change everything! I hope something good comes out of this

Does it work on the U/U1 variants of the S9+ as well?

krion64 said:
Does it work on the U/U1 variants of the S9+ as well?
Click to expand...
Click to collapse
It probably will but no files have been made for s9+ yet and not yet tested
Sent from some device I modified

krion64 said:
Does it work on the U/U1 variants of the S9+ as well?
Click to expand...
Click to collapse
It’s confirmed working on both SM-G960U/U1 and SM-G965U/U1
Sent from some device I modified

Any chance that this might be used and not trip knox? This sounds like a similar method that was used in previous devices.

Argyrus said:
Any chance that this might be used and not trip knox? This sounds like a similar method that was used in previous devices.
Click to expand...
Click to collapse
You cannot trip knox on a locked bootloader
Sent from some device I modified

jrkruse said:
You cannot trip knox on a locked bootloader
Sent from some device I modified
Click to expand...
Click to collapse
Gotcha, any idea of when you might get this working for G965U or if you will allow testers?

Argyrus said:
Gotcha, any idea of when you might get this working for G965U or if you will allow testers?
Click to expand...
Click to collapse
Did you not read la couple post above yoir question
Sent from some device I modified

jrkruse said:
Did you not read la couple post above yoir question
Sent from some device I modified
Click to expand...
Click to collapse
I did, but you made two posts, one that you said no files have been created and not tested then also state that it has been confirmed.
Since that seems to be the case then my bad for being confused.

Argyrus said:
I did, but you made two posts, one that you said no files have been created and not tested then also state that it has been confirmed.
Since that seems to be the case then my bad for being confused.
Click to expand...
Click to collapse
When it was tested I posted it was confirmed. Stuff will be released soon
Sent from some device I modified

jrkruse said:
When it was tested I posted it was confirmed. Stuff will be released soon
Sent from some device I modified
Click to expand...
Click to collapse
Awesome, sorry for any confusion.

jrkruse said:
You cannot trip knox on a locked bootloader
Sent from some device I modified
Click to expand...
Click to collapse
jrkruse said:
It probably will but no files have been made for s9+ yet and not yet tested
Sent from some device I modified
Click to expand...
Click to collapse
That means I can have root and have Samsung pay? God damn that makes me wet

Dhdeanha said:
That means I can have root and have Samsung pay? God damn that makes me wet
Click to expand...
Click to collapse
As of right now it's still detecting su binaries. So Samsung Pay probably may not work.

On my G965/U1 I do not even see a "/system/etc/init/init.lab.rc" file on my device, is this because I am updated to the latest Android 9 December 1st security patch?

elguy said:
On my G965/U1 I do not even see a "/system/etc/init/init.lab.rc" file on my device, is this because I am updated to the latest Android 9 December 1st security patch?
Click to expand...
Click to collapse
Don't worry about it. It will work on it, it's been proven to work exactly on Android 9, Dec 2019 security patch.

Wow! that's exciting, I can't wait until this releases. Looks like I'm not updating my phone anymore until then. Especially exciting if it works on Android 9 December 2019 security patch

the question is how likely this will be patched in Samsung's next update and how much time this may cause them to delay their next security patch.

Extreme Syndicate Root for S9 is live!!