I was attempting to remove the FRP on this ATT version when I did something terribly wrong. It now will only allow me to enter download mode. I tried to flash all versions I could find for the stock firmware and ODIN fails at boot.img. I tried with PIT and without and all sorts of variations. No luck.
Download mode shows:
ODIN MODE
PRODUCT NAME SM-T377A
CURRENT BINARY SAMSUNG OFFICIAL
SYSTEM STATUS OFFICIAL
FRP LOCK ON
SECURE DOWNLOAD ENABLED
KNOX WARRANTY VOID 0 0X0000
AP SWREV B3 K1 S2
Regular booting says:
An error has occurred while updating the device software. Use the emergency recovery function in smart switch PC software
What exactly do i need to flash to unbrick this? I have spent at least 20 hours on this.
It4sd said:
I was attempting to remove the FRP on this ATT version when I did something terribly wrong. It now will only allow me to enter download mode. I tried to flash all versions I could find for the stock firmware and ODIN fails at boot.img. I tried with PIT and without and all sorts of variations. No luck.
Download mode shows:
ODIN MODE
PRODUCT NAME SM-T377A
CURRENT BINARY SAMSUNG OFFICIAL
SYSTEM STATUS OFFICIAL
FRP LOCK ON
SECURE DOWNLOAD ENABLED
KNOX WARRANTY VOID 0 0X0000
AP SWREV B3 K1 S2
Regular booting says:
An error has occurred while updating the device software. Use the emergency recovery function in smart switch PC software
What exactly do i need to flash to unbrick this? I have spent at least 20 hours on this.
Click to expand...
Click to collapse
Sounds like you need too flash new firmware first . This happened to me the first time I rooted and added a custom ROM on a galaxy note 8. I would also be sure you have adb set up on the pc. I am pretty new at this. Still learning, these are a couple things I had to do my first time.
Johnydmic said:
Sounds like you need too flash new firmware first . This happened to me the first time I rooted and added a custom ROM on a galaxy note 8. I would also be sure you have adb set up on the pc. I am pretty new at this. Still learning, these are a couple things I had to do my first time.
Click to expand...
Click to collapse
Although the Tab E has a different OS Samsungs firmware seems to all work the same for the most part.
Hello samsung gurus! I think I've bricked my phone
A few days ago I tried flashing a custom rom (didn't even get to that part but that was my goal).
I was on DBT XXU2CSA2 with XXU2CRTL so I tried flashing other stock roms (only XXU2) via download mode with Odin 3.13.1 and it didn't work it said something like Custom binaries are not allowed to be flashed due to KG locked (BOOTLOADER).
Then I entered recovery and made a factory reset and selected reboot to bootloader and when I tried to flash a rom (stock XEU XXU2ARJ1) it worked ... now I went and enabled the developer mode ... checked OEM Unlock which restarted my phone ... enabled usb debugging because I was preparing for flashing twrp.
Put the phone in recovery and choose reboot to bootloader after that I flashed twrp and then it booted into it.
I was going to flash Dr.Ketan rom and after I downloaded the files I saw that there was a file BL_N960FXXU2CSA2_CP_N960FXXU2CRLT_extract_this_first.zip so I thought that I need to flash that first so I rebooted my phone from twrp pressed vol down + bixby which got me directly into download mode and flashed the bl and cp from odin and this is where all ended it didn't work as it said :
All binaries are not allowed to be flashed due to KG Locked. (RADIO)
And when I restarted my phone the only thing that appears on the screen is: Custom binary blocked due to remaining installment balance. Even when I plug the charger in I get this message and no charger animation So now I can't boot intro recovery because I flashed twrp .. and when I boot in download mode anything that I try to flash ends with the message:
All binaries are not allowed to be flashed due to KG Locked.
When I boot in download mode I get the following details:
PRODUCT NAME: SM-N960F
CURRENT BINARY: Custom
KG STATE: LOCKED
FRP LOCK: OFF
OEM LOCK: OFF
Secure Download: Enabled
CCIC = MAX77705 hw: 3 main: 30
WARRANTY VOID: 1 (0x030c)
AP SWREV: B:2 K:2 S:2
and a bunch of other info (DID, LOT_ID, CHIP_ID, nAsv_TABLE, nAsv_CPUCL0, nAsv_CPUCL1, nAsv_G3D, nAsv_MIF, nAsv_INT, nAsv_CAM_DISP, nAsv_CP, nAsv_PMIC, nAsv_PMIC_CP, nAsv_FSYS, product_line, asb_version, ids_big, ids_g3d, PMIC_ID, LPDDR4 manufacturer, LPDDR4 process ver, LPDDR3 size)
and anything I try to flash (i tried all files from DBT XXU2, also individual files like just BL/AP/CP/CSC and even individual imgs like sboot, boot, recovery, system, cache) and always the same message All binaries are not allowed to be flashed due to KG Locked.
Is my phone really bricked ? Anybody have any tips on what should I do ? I searched for 2 days for any solution and didn't find anything specific for N960F and solutions for other models didn't work, also nothing comes up on searches on KG STATE :crying:
Have you tried Smart Switch?
moromindful said:
Hello samsung gurus! I think I've bricked my phone
A few days ago I tried flashing a custom rom (didn't even get to that part but that was my goal).
I was on DBT XXU2CSA2 with XXU2CRTL so I tried flashing other stock roms (only XXU2) via download mode with Odin 3.13.1 and it didn't work it said something like Custom binaries are not allowed to be flashed due to KG locked (BOOTLOADER).
Then I entered recovery and made a factory reset and selected reboot to bootloader and when I tried to flash a rom (stock XEU XXU2ARJ1) it worked ... now I went and enabled the developer mode ... checked OEM Unlock which restarted my phone ... enabled usb debugging because I was preparing for flashing twrp.
Put the phone in recovery and choose reboot to bootloader after that I flashed twrp and then it booted into it.
I was going to flash Dr.Ketan rom and after I downloaded the files I saw that there was a file BL_N960FXXU2CSA2_CP_N960FXXU2CRLT_extract_this_first.zip so I thought that I need to flash that first so I rebooted my phone from twrp pressed vol down + bixby which got me directly into download mode and flashed the bl and cp from odin and this is where all ended it didn't work as it said :
All binaries are not allowed to be flashed due to KG Locked. (RADIO)
And when I restarted my phone the only thing that appears on the screen is: Custom binary blocked due to remaining installment balance. Even when I plug the charger in I get this message and no charger animation So now I can't boot intro recovery because I flashed twrp .. and when I boot in download mode anything that I try to flash ends with the message:
All binaries are not allowed to be flashed due to KG Locked.
When I boot in download mode I get the following details:
PRODUCT NAME: SM-N960F
CURRENT BINARY: Custom
KG STATE: LOCKED
FRP LOCK: OFF
OEM LOCK: OFF
Secure Download: Enabled
CCIC = MAX77705 hw: 3 main: 30
WARRANTY VOID: 1 (0x030c)
AP SWREV: B:2 K:2 S:2
and a bunch of other info (DID, LOT_ID, CHIP_ID, nAsv_TABLE, nAsv_CPUCL0, nAsv_CPUCL1, nAsv_G3D, nAsv_MIF, nAsv_INT, nAsv_CAM_DISP, nAsv_CP, nAsv_PMIC, nAsv_PMIC_CP, nAsv_FSYS, product_line, asb_version, ids_big, ids_g3d, PMIC_ID, LPDDR4 manufacturer, LPDDR4 process ver, LPDDR3 size)
and anything I try to flash (i tried all files from DBT XXU2, also individual files like just BL/AP/CP/CSC and even individual imgs like sboot, boot, recovery, system, cache) and always the same message All binaries are not allowed to be flashed due to KG Locked.
Is my phone really bricked ? Anybody have any tips on what should I do ? I searched for 2 days for any solution and didn't find anything specific for N960F and solutions for other models didn't work, also nothing comes up on searches on KG STATE :crying:
Click to expand...
Click to collapse
first time I've herd of KG state.
get samsung smart switch and go to the emergency recovery menu incase that works.
Rosli59564 said:
Have you tried Smart Switch?
Click to expand...
Click to collapse
i tried smart switch latest version and while in download mode it says unrecognized phone ... i also downloaded a version where the device initialization is available .... entered the s/n from the back of the phone and it says n960f doesn't support initialization ... so no luck with smart switch either
I'm on pie and I found in developers options the 6st option down in the row is to unlock bootloader. This is the first time that I've sean something like that and I don't know what's it for but maybe it's your case.
EDIT: sorry, I realized that you already used it.
moromindful said:
i tried smart switch latest version and while in download mode it says unrecognized phone ... i also downloaded a version where the device initialization is available .... entered the s/n from the back of the phone and it says n960f doesn't support initialization ... so no luck with smart switch either
Click to expand...
Click to collapse
check your xda pm for solution
gsmfixer said:
check your xda pm for solution
Click to expand...
Click to collapse
This is still not resolved.
I tryed flashing combination files still the same message in download mode: All binaries are not allowed to be flashed due to KG Locked.
When booting recovery: Custom binary blocked by remaining installment balance
When normal boot same message as in recovery
So if anyone have any ideea what should I try please chip in ...
I will gladly pay for any service related to unbricking my phone or at least guiding me to unbricking it if this is possible.
I added some photos. Still no solution yet
Did you try to flash lastest stock android pie rom
malucthuyquai said:
Did you try to flash lastest stock android pie rom
Click to expand...
Click to collapse
I tried to flash stock rom. full files, partial files ... all give me the same error All binaries are not allowed to be flashed due to KG locked.
moromindful said:
Hello samsung gurus! I think I've bricked my phone
A few days ago I tried flashing a custom rom (didn't even get to that part but that was my goal).
I was on DBT XXU2CSA2 with XXU2CRTL so I tried flashing other stock roms (only XXU2) via download mode with Odin 3.13.1 and it didn't work it said something like Custom binaries are not allowed to be flashed due to KG locked (BOOTLOADER).
Then I entered recovery and made a factory reset and selected reboot to bootloader and when I tried to flash a rom (stock XEU XXU2ARJ1) it worked ... now I went and enabled the developer mode ... checked OEM Unlock which restarted my phone ... enabled usb debugging because I was preparing for flashing twrp.
Put the phone in recovery and choose reboot to bootloader after that I flashed twrp and then it booted into it.
I was going to flash Dr.Ketan rom and after I downloaded the files I saw that there was a file BL_N960FXXU2CSA2_CP_N960FXXU2CRLT_extract_this_first.zip so I thought that I need to flash that first so I rebooted my phone from twrp pressed vol down + bixby which got me directly into download mode and flashed the bl and cp from odin and this is where all ended it didn't work as it said :
All binaries are not allowed to be flashed due to KG Locked. (RADIO)
And when I restarted my phone the only thing that appears on the screen is: Custom binary blocked due to remaining installment balance. Even when I plug the charger in I get this message and no charger animation So now I can't boot intro recovery because I flashed twrp .. and when I boot in download mode anything that I try to flash ends with the message:
All binaries are not allowed to be flashed due to KG Locked.
When I boot in download mode I get the following details:
PRODUCT NAME: SM-N960F
CURRENT BINARY: Custom
KG STATE: LOCKED
FRP LOCK: OFF
OEM LOCK: OFF
Secure Download: Enabled
CCIC = MAX77705 hw: 3 main: 30
WARRANTY VOID: 1 (0x030c)
AP SWREV: B:2 K:2 S:2
and a bunch of other info (DID, LOT_ID, CHIP_ID, nAsv_TABLE, nAsv_CPUCL0, nAsv_CPUCL1, nAsv_G3D, nAsv_MIF, nAsv_INT, nAsv_CAM_DISP, nAsv_CP, nAsv_PMIC, nAsv_PMIC_CP, nAsv_FSYS, product_line, asb_version, ids_big, ids_g3d, PMIC_ID, LPDDR4 manufacturer, LPDDR4 process ver, LPDDR3 size)
and anything I try to flash (i tried all files from DBT XXU2, also individual files like just BL/AP/CP/CSC and even individual imgs like sboot, boot, recovery, system, cache) and always the same message All binaries are not allowed to be flashed due to KG Locked.
Is my phone really bricked ? Anybody have any tips on what should I do ? I searched for 2 days for any solution and didn't find anything specific for N960F and solutions for other models didn't work, also nothing comes up on searches on KG STATE :crying:
Click to expand...
Click to collapse
Hello moromindful,
did you ever find any solution to your problem?
besmirgogu said:
Hello moromindful,
did you ever find any solution to your problem?
Click to expand...
Click to collapse
unfortunately no do you know a solution ? or are you in the same situation ?
moromindful said:
unfortunately no do you know a solution ? or are you in the same situation ?
Click to expand...
Click to collapse
same situation :/
besmirgogu said:
same situation :/
Click to expand...
Click to collapse
Maybe someone who has a solution will see this post now that it is bumped up.
I tried a whole lot of different things all ended in the same problem. All binaries are not allowed to be flashed due to KG Locked.
moromindful said:
Hello samsung gurus! I think I've bricked my phone
A few days ago I tried flashing a custom rom (didn't even get to that part but that was my goal).
I was on DBT XXU2CSA2 with XXU2CRTL so I tried flashing other stock roms (only XXU2) via download mode with Odin 3.13.1 and it didn't work it said something like Custom binaries are not allowed to be flashed due to KG locked (BOOTLOADER).
Then I entered recovery and made a factory reset and selected reboot to bootloader and when I tried to flash a rom (stock XEU XXU2ARJ1) it worked ... now I went and enabled the developer mode ... checked OEM Unlock which restarted my phone ... enabled usb debugging because I was preparing for flashing twrp.
Put the phone in recovery and choose reboot to bootloader after that I flashed twrp and then it booted into it.
I was going to flash Dr.Ketan rom and after I downloaded the files I saw that there was a file BL_N960FXXU2CSA2_CP_N960FXXU2CRLT_extract_this_first.zip so I thought that I need to flash that first so I rebooted my phone from twrp pressed vol down + bixby which got me directly into download mode and flashed the bl and cp from odin and this is where all ended it didn't work as it said :
All binaries are not allowed to be flashed due to KG Locked. (RADIO)
And when I restarted my phone the only thing that appears on the screen is: Custom binary blocked due to remaining installment balance. Even when I plug the charger in I get this message and no charger animation So now I can't boot intro recovery because I flashed twrp .. and when I boot in download mode anything that I try to flash ends with the message:
All binaries are not allowed to be flashed due to KG Locked.
When I boot in download mode I get the following details:
PRODUCT NAME: SM-N960F
CURRENT BINARY: Custom
KG STATE: LOCKED
FRP LOCK: OFF
OEM LOCK: OFF
Secure Download: Enabled
CCIC = MAX77705 hw: 3 main: 30
WARRANTY VOID: 1 (0x030c)
AP SWREV: B:2 K:2 S:2
and a bunch of other info (DID, LOT_ID, CHIP_ID, nAsv_TABLE, nAsv_CPUCL0, nAsv_CPUCL1, nAsv_G3D, nAsv_MIF, nAsv_INT, nAsv_CAM_DISP, nAsv_CP, nAsv_PMIC, nAsv_PMIC_CP, nAsv_FSYS, product_line, asb_version, ids_big, ids_g3d, PMIC_ID, LPDDR4 manufacturer, LPDDR4 process ver, LPDDR3 size)
and anything I try to flash (i tried all files from DBT XXU2, also individual files like just BL/AP/CP/CSC and even individual imgs like sboot, boot, recovery, system, cache) and always the same message All binaries are not allowed to be flashed due to KG Locked.
Is my phone really bricked ? Anybody have any tips on what should I do ? I searched for 2 days for any solution and didn't find anything specific for N960F and solutions for other models didn't work, also nothing comes up on searches on KG STATE :crying:
Click to expand...
Click to collapse
Just for my understatement : You flashed a custom ROM via Odin ?
Are you german (because DBT)?
amorosa said:
Just for my understatement : You flashed a custom ROM via Odin ?
Are you german (because DBT)?
Click to expand...
Click to collapse
I am not german. I bought the phone from a friend who lives in Germany.
I flashed via Odin.
besmirgogu said:
same situation :/
Click to expand...
Click to collapse
Did you find a solution ? I have found that the only way would be to change the mother board :|
moromindful said:
Did you find a solution ? I have found that the only way would be to change the mother board :|
Click to expand...
Click to collapse
unfortunately I was told the same thing. I simply gave up...
I have a phone, same your phone: KG STATE: LOCKED My phone is A205F . Can you help me, any one?
https://techshali.com/unbrick-galaxy-note-9/
Hello friends,
my wife had an elder Samsung Galaxy GT-I9000, bootloader unlocked, rooted, Common Slim-ROM,CWM-Recovery, I have a full backup. I wanted to clear all personal datas. Because I could not accomplish cleaning I tried to flash by CWM-Recovery an other ROM "cm-10.2.0-galaxysmtd.zip". This flash replaced obviously the CWM-Recovery with the Semaphore_2.7.4.tar kernel. From now on the trouble began. The new galaxysmtd-ROM had a few shortcommings and I tried to restore the backup of my old "Slim-ROM" with the new "Semaphore-kernel". This was the start of the trouble. From now on I ran into the following given status-quo. See also the attached pics.
- The phone does not boot into recovery mode but into download mode with the 3-button method or by using a JIG.
- The phone is recognized in Odin with <ID:0/004> Added!! on com4, but when I want to flash a recovery tar-file CWM Recovery v6.0.3.6.tar, or a stock-ROM JW6_JW2_JW1.tar, or the adequate pit-file s1_odin_20100512.pit, each try ends up with the message"succeed 0 / failed 1".
- In ADB it says: "error: device '(null)' not found". So the phone is not seen by ADB at all, allthough it is in "download-mode".
Can anybody help and explain to me, what happened and give me a step by step procedure, how to get out of this trouble and restore the phone, so I can get access to it at all and start over with a new factory flash. Thank you with kind regards
Johann (Hans) Ohlerth email: [email protected]
- The phone does not boot into recovery mode but into download mode with the 3-button method or by using a JIG.
Click to expand...
Click to collapse
There are 2 three-button-combinations on this phone:
Volume down & Home & Power ---> Download Mode
Volume up & Home & Power ---> Recovery Mode
- The phone is recognized in Odin with <ID:0/004> Added!! on com4, but when I want to flash a recovery tar-file CWM Recovery v6.0.3.6.tar, or a stock-ROM JW6_JW2_JW1.tar, or the adequate pit-file s1_odin_20100512.pit, each try ends up with the message"succeed 0 / failed 1".
Click to expand...
Click to collapse
Are you sure that you have the Samsung drivers installed and that the phone is in download mode?
- In ADB it says: "error: device '(null)' not found". So the phone is not seen by ADB at all, allthough it is in "download-mode".
Click to expand...
Click to collapse
This is normal, download mode is only used for flashing through Heimdall/Odin.
Guys I have this galaxy a6 plus and suddenly it started bootlooping for two days now im trying to fix it.
i tried : flashing new full rom from sammobile, flashing only in AP. I also tried flashing recovery but always get blocked by FAP LOCK
the only thing i can do with the phone is go to download mode. i cant even go to recovery.
the information on download mode :
Code:
ODIN MODE (HIGH SPEED)
PRODUCT NAME: SM-A605F
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
FAP LOCK: ON
OEM LOCK: ON
WARRANTY VOID: 0x0
QUALCOMM SECUREBOOT: ENABLED (CSB)
AP SWREV: S1, T1, R1, A4, P4
AP SWREV: K 4, S 4
SECURE DOWNLOAD : ENABLE
DID : 009aba66fcd3
download mode !!
please help me with this guy i really dont want to lose the phone.
how about bringing it to samsung service center?
What have you done before the problem?
JasonS. said:
What have you done before the problem?
Click to expand...
Click to collapse
This all started from flashing broken recovery
I had bootloop, and I can't find any way to fix this
so I tried to flash new firmware, but it always goes to recovery mode
I couldn't enter download mode, so I brought to samsung service center
tmvkrpxl0 said:
This all started from flashing broken recovery
I had bootloop, and I can't find any way to fix this
so I tried to flash new firmware, but it always goes to recovery mode
I couldn't enter download mode, so I brought to samsung service center
Click to expand...
Click to collapse
Weird... should still be able to enter download mode. From there, flash original firmware on everything (AP, BL, CSC, etc.)
its gonna be late answer but u should run odin as an administor and flash latest rom.
joker.lg said:
its gonna be late answer but u should run odin as an administor and flash latest rom.
Click to expand...
Click to collapse
To expand on that, make sure that your phone is detected by odin. Run odin as administrator and install the samsung USB drivers as well.
Then, on connect, odin should show "added" for your phone.
From there, fully flash a stock rom (BL,AP,CP,CSC) with a version equal to or better than what you had before, ideally the one made for your country and carrier. Beware that if you update to a late pie rom, you can NOT go back to oreo.
joker.lg said:
its gonna be late answer but u should run odin as an administor and flash latest rom.
Click to expand...
Click to collapse
does that do anything