Database Develop

Flashing Issues/Permission Issues

A few days ago I got my Atrix HD and immediately rooted and subsequently unlocked the bootloader. Later I successfully flashed EcHoFiiVe's paranoidAndroid port... I didn't really like it because of the aspect ratio (too tiny) so I tried to flash back to a stock ROM. I lost and later accidentally deleted the backup I had made of the stock ROM that came on the device so that is now out of the question but for some reason, no matter what I do, I can't make changes to /system from the recovery or from the bootloader using fastboot commands. I've tried inputing
Code:
fastboot erase system -w
and it told me that I didn't have sufficient permissions and that the command failed. Therein lies my problem. Fortunately, I have a runnable backup (PA) I just really wish to try something different and the device is adamantly against the idea. According to the bootloader the device is unlocked with status code 3. Any help will be greatly appreciated!

read this
http://forum.xda-developers.com/showthread.php?t=2226527

frog1982 said:
read this
http://forum.xda-developers.com/showthread.php?t=2226527
Click to expand...
Click to collapse
I've read through that and I can now see a line that I missed that said that it was a common issue for that particular command to not work but I still don't know what to do about my inability to flash a different ROM. I have tried to mount /system before flashing and I've tried wiping /system using the recovery before flashing, all without avail. Do you have any advice on how to wipe the system partition?

you do not have to wipe it just fastboot flash Mex retail to overwrite it and you will be starting over.

frog1982 said:
you do not have to wipe it just fastboot flash Mex retail to overwrite it and you will be starting over.
Click to expand...
Click to collapse
to be clear, are you saying I can just do this:
Extract the zip
Open a terminal to the extracted zips directory
Reboot into fastboot
Type the following commands in this order
Code:
fastboot flash boot boot.img
fastboot flash devtree device_tree.bin
fastboot flash system system.img
fastboot -w
fastboot reboot

sparkplugDev said:
to be clear, are you saying I can just do this:
Extract the zip
Open a terminal to the extracted zips directory
Reboot into fastboot
Type the following commands in this order
Code:
fastboot flash boot boot.img
fastboot flash devtree device_tree.bin
fastboot flash system system.img
fastboot -w
fastboot reboot
Click to expand...
Click to collapse
yes but make sure you also have the snap-fastboot files in the folder you are working in or in your path

[No More Errors] [Fastboot Rom Flashing] [Direct Method]

Hi all,
Yesterday i flashed miui LP on my Redmi 2 Prime. In the evening i tried to flash the miui KK with fastboot rom. But ended up with unspecified error . I tried many things but no luck. Then i followed direct method and that worked. Following is the procedure.
Note:
1. This will erase all your data and internal storage so better you backup them first.
2. I'm not responsible if anything goes wrong with your device.
Requirement:
1. Minimal ADB and Fastboot
2. Fastboot rom
3. Mi Pc Suite (for drivers, you can skip if already installed drivers)
Preparing:
1. Install Mi Pc Suite.
2. Install Minimal ADB and Fastboot.
3. Extract fastboot rom anywhere.
4. Copy all the files from images folder to the directory where Minimal ADB And fastboot is installed.
for example C:\Program Files (x86)\Minimal ADB and Fastboot
Procedure:
1. Connect your phone to pc in fastboot mode,
your Pc will install some drivers automatically.
2. Go to Minimal ADB and Fastboot directory .
3. Hold shift and right click.
4. Click open command window here.
5. Enter fastboot devices command.
If you see your device name in list of devices attached in command window then your good to go.
6. Now enter the following commands given below one by one in sequence.
fastboot flash partition gpt_both0.bin
fastboot flash tz tz.mbn
fastboot flash sbl1 sbl1.mbn
fastboot flash rpm rpm.mbn
fastboot flash aboot emmc_appsboot.mbn
fastboot flash hyp hyp.mbn
fastboot flash tzbak tz.mbn
fastboot flash sbl1bak sbl1.mbn
fastboot flash rpmbak rpm.mbn
fastboot flash abootbak emmc_appsboot.mbn
fastboot flash hypbak hyp.mbn
fastboot erase boot
fastboot flash modem NON-HLOS.bin
fastboot flash system system.img
fastboot flash cache cache.img
fastboot flash userdata userdata.img
fastboot flash recovery recovery.img
fastboot flash boot boot.img
fastboot flash persist persist.img
fastboot flash sec sec.dat
fastboot flash splash splash.img
fastboot reboot
Or
Simply put Flash All.bat (Attached Bellow) in Minimal ADB and Fastboot directory and double click on it (No need to enter those commands). Your Devices will reboot automatically when flashing done.
congrats
Hit thanks

It fails at the first step. Can't flash the partition table, it always says "FAILED (remote: failed to write partition)"
I've tried several different ROM packs, even tried one for a different Redmi 2 version, and still can't do it.

did you place all the files in minimal adb and fastboot folder?
gabika1941 said:
It fails at the first step. Can't flash the partition table, it always says "FAILED (remote: failed to write partition)"
I've tried several different ROM packs, even tried one for a different Redmi 2 version, and still can't do it.
Click to expand...
Click to collapse
did you place all the files in minimal adb and fastboot folder? And what you mean by using several different rom package? This method is only for fastboot rom made for redmi 2 only. Make sure your phone is detected by PC in fastboot mode with command fastboot devices.
I have tested this method three times without any errors. You are surely doing something wrong.

screenshot
gabika1941 said:
It fails at the first step. Can't flash the partition table, it always says "FAILED (remote: failed to write partition)"
I've tried several different ROM packs, even tried one for a different Redmi 2 version, and still can't do it.
Click to expand...
Click to collapse
Can you attach a screenshot of your minimal adb and fastboot folder here. Also attach screenshot of your cmd window when you face error.

rkmadotra said:
Can you attach a screenshot of your minimal adb and fastboot folder here. Also attach screenshot of your cmd window when you face error.
Click to expand...
Click to collapse
i have a similar problem :
C:\Xiaomi\wt86047_pro_images_6.3.25_20160307.0000.16_5.1_cn_ee14351bfb\images>fastboot.exe flash partition gpt_backup0.bin
target reported max download size of 268435456 bytes
sending 'partition' (16 KB)...
OKAY [ 0.005s]
writing 'partition'...
FAILED (remote: failed to write partition)
finished. total time: 0.018s
C:\Xiaomi\wt86047_pro_images_6.3.25_20160307.0000.16_5.1_cn_ee14351bfb\images>
Click to expand...
Click to collapse
I have a 2014813 , was using a moded 2014811 rom on it. Kept crashing wanted to reflash , and installed TWRP on it , that said can't mount partitions and now i can't flash neider the 811 or the 813 roms to it . Just keeps saying error writing to partition . I can attach a screenshot of the Miflash tool if it helps. And above is the Command prompt error.

Pushing just 5 img files didn't worked for me and was stuck on MI logo, but pushing all files was reviving my phone!
Thank you very much for this method!

sir, my Redmi 2 is bricked
when I am trying to flash this the error messages is coming like
cannot load " gpt_both0.bin".
like these and so on. when I am using flash all.bat same messages is coming and then after erasing boot the phone reboots with black screen .
sir please help me
your help will be highly appriciated.
[email protected]

My phone stucks on Mi logo what will do

yeah!!!!!!!!!!!! after trying many other methods like recovery through adb ,command prompt,mi flash tool,mi pc suit...... i downloaded atleast 4-5 roms to just confirm that whether flash tool has some problem or the ROMs..........but if something worked after constantly trying many things in past three days it is this method.......seriously...
FYI this is the way i used it and u should probably use the same way
-> download MI flash tool (google it)
->install(in C
->download any compatible ROM for ur phone
->open :- C:\Program Files\Xiaomi\MiPhone\Google\Android
->paste all the contents of image folder from the ROM into this android folder
->then download this Flash All.bat from here and extract it...
->put your phone in fastboot mode ->connect it via usb
->then double click your Flash all.bat file-> give it some time->once finished ur device will start automatically
->after 10 mins or so disconnect ur phone from pc ... give it 4-5 mins , ur phone will be out of bootloop and u will be awarded with a new MIUI

Yes! It worked for me as well.
Thanks for your steps.
(FYI this is the way i used it and u should probably use the same way
-> download MI flash tool (google it)
->install(in C
->download any compatible ROM for ur phone
->open :- C:\Program Files\Xiaomi\MiPhone\Google\Android
->paste all the contents of image folder from the ROM into this android folder
->then download this Flash All.bat from here and extract it...
->put your phone in fastboot mode ->connect it via usb
->then double click your Flash all.bat file-> give it some time->once finished ur device will start automatically
->after 10 mins or so disconnect ur phone from pc ... give it 4-5 mins , ur phone will be out of bootloop and u will be awarded with a new MIUI )
and it worked good.
My Mi Account was locked and could not connect to internet at all.
I had tried using Flash tools, PC suite - Flash methods and nothing worked. I had spend more time to fix my mobile in all these ways.
But this method is awesome. Only took around 15 minutes to completely flash my mobile.
After flashing the mobile, I am able to connect to internet and I have also created a new Mi-Account and linked my G-Mail account to it.
Am super happy now.
Thanks a lot.
However I would wish to add another details to the above setps:
The Flashall.BAT too needs to be extracted and copied into the same folder where the contents from ROM's Image folder were copied.

awesome bro thankyou very much.it's working absolutely well:good::good:

Tried a similar method and got my redmi2 prime hard bricked. Can someone tell me the test points in the device 2014818?

Thanx This works for me. successfull to flash my redme 2
Simply put Flash All.bat (Attached Bellow) in Minimal ADB and Fastboot directory and double click on it (No need to enter those commands). Your Devices will reboot automatically when flashing done.
congrats
Hit thanks[/QUOTE]

Will this work for Redmi note 3 Snapdragon??

Hello
I am stick in bootloop with my Redmi 3 (after trying Flashify).
Tried the above method with high hopes, as I have been trying everything else also with no luck.
I have downloaded a ROM for my device of course.
It all seems to go well until I launch the Flash_All.bat
Then the DOS commands are executed in 5 to 10 secs, and my devices reboot, but in a bootloop again
I got a breif view at the DOS commands, and it basically, at several lines says somthing, like: "failed to write, device is locked"
see attached sreen shot
does this mean my problem has no solution and I can simply throw away my device?
Thanks

rkmadotra said:
Hi all,
Yesterday i flashed miui LP on my Redmi 2 Prime. In the evening i tried to flash the miui KK with fastboot rom. But ended up with unspecified error . I tried many things but no luck. Then i followed direct method and that worked. Following is the procedure...
Click to expand...
Click to collapse
You solved my problem :good:

Thank you buddy..... This method works

Fastbooting method did not bring back my stock model number that is hm2014818. It changed to 2014817 when i flashed miui 8 64bit rom for redmi 2. Now i am not able to go back to my original model number even by fastboot method. Any help please??

will the flash all.bat support on other mi device's??

stuck at erasing user data
flashing stuck at flashing userdata

[ROM][STOCK][FASTBOOT][OP6T] Stock Fastboot ROMs for OnePlus 6T

Things are changing with the advent of project treble and seamless updates. OnePlus will no longer release ROMs flashable via recovery (either stock or twrp) because is no more needed. The updates will be done on the slot not used for example if you are using slot a the update will be installed on slot b and the slot b will be set as default. If you brick and you are in bootloop how you can restore the rom? You can't with Stock ROM you have, because the zip can be only installed via Update Engine, so what can you do? Flash a stock rom via fastboot. I have extracted all images from the stock zip and i have made a new zip with the Fastboot ROM with a flash-all.bat included. This will work only if your bootloader is unlocked. This will erase all your data and will wipe your internal storage.
HOW TO FLASH
This version is only for not branded devices
Download the zip;
Unpack the zip in a folder;
Reboot the OnePlus 6T in fastboot mode (Power and volume-);
Connect the OnePlus 6T to PC;
Run flash-all.bat flasher you need;
Wait until the process end;
The phone will automatically reboot.
FLASHER ADVANCED GUIDE
flash-all-partitions-fastboot.bat : this .bat will flash all possible partitions through fastboot (Except persist) , there are some criticals partitions that can't be flashed through fastboot;
flash-only-persist.bat : this .bat will flash only persist partition in fastboot mode (This is good for people that have problems with sensor);
flash-all-partitions-recovery-criticals.bat : this .bat will boot the twrp and will flash criticals partitions, use this carefully;
flash-system-boot-vendor.bat : this .bat is the same of older flash-all.bat and so it will flash only vendor, system and boot;
flash-all-partitions.bat : this .bat will run flash-all-partitions-fastboot.bat , then flash-only-persist.bat and then flash-all-partitions-recovery-criticals.bat .
Now usually the one needed is only the first "flash-all-partitions-fastboot.bat" but if you are badly bricked i recommend to use flash-all-partitions.bat .
DOWNLOAD
All roms on AFH: https://www.androidfilehost.com/?w=files&flid=284914
All roms on Sourceforge: https://sourceforge.net/projects/fastbootroms/files/OnePlus 6T
BRANDED PHONE
GUIDE: https://forum.xda-developers.com/on...-t-mobile-oneplus-6t-to-t3865966/post78131430
T-Mobile OnePlus 6T Internationa ROM: https://www.androidfilehost.com/?fid=11410963190603845445
MANUAL FLASH: Windows - OSX - Linux
If you want to manual flash these roms these are the commands (you need to extract images.zip before proceed)
Fastboot Partitions:
Code:
fastboot flash aop_a aop.img
fastboot flash aop_b aop.img
fastboot flash bluetooth_a bluetooth.img
fastboot flash bluetooth_b bluetooth.img
fastboot flash boot_a boot.img
fastboot flash boot_b boot.img
fastboot flash dsp_a dsp.img
fastboot flash dsp_b dsp.img
fastboot flash dtbo_a dtbo.img
fastboot flash dtbo_b dtbo.img
fastboot flash fw_4j1ed_a fw_4j1ed.img
fastboot flash fw_4j1ed_b fw_4j1ed.img
fastboot flash fw_4u1ea_a fw_4u1ea.img
fastboot flash fw_4u1ea_b fw_4u1ea.img
fastboot flash modem_a modem.img
fastboot flash modem_b modem.img
fastboot flash oem_stanvbk oem_stanvbk.img
fastboot flash qupfw_a qupfw.img
fastboot flash qupfw_b qupfw.img
fastboot flash storsec_a storsec.img
fastboot flash storsec_b storsec.img
fastboot flash system_a system.img
fastboot flash system_b system.img
fastboot flash vbmeta_a vbmeta.img
fastboot flash vbmeta_b vbmeta.img
fastboot flash vendor_a vendor.img
fastboot flash vendor_b vendor.img
fastboot flash LOGO_a LOGO.img
fastboot flash LOGO_b LOGO.img
If you need also persist partition, this is the command:
Code:
fastboot flash persist persist.img
Criticals Partitions, for these you need to boot the TWRP:
Code:
fastboot boot TWRP.img
When you are in TWRP you need to run these commands to push and flash all criticals partitions:
Code:
adb push abl.img /sdcard/abl.img
adb shell dd if=/sdcard/abl.img of=/dev/block/bootdevice/by-name/abl_a
adb shell dd if=/sdcard/abl.img of=/dev/block/bootdevice/by-name/abl_b
adb push cmnlib.img /sdcard/cmnlib.img
adb shell dd if=/sdcard/cmnlib.img of=/dev/block/bootdevice/by-name/cmnlib_a
adb shell dd if=/sdcard/cmnlib.img of=/dev/block/bootdevice/by-name/cmnlib_b
adb push cmnlib64.img /sdcard/cmnlib64.img
adb shell dd if=/sdcard/cmnlib64.img of=/dev/block/bootdevice/by-name/cmnlib64_a
adb shell dd if=/sdcard/cmnlib64.img of=/dev/block/bootdevice/by-name/cmnlib64_b
adb push devcfg.img /sdcard/devcfg.img
adb shell dd if=/sdcard/devcfg.img of=/dev/block/bootdevice/by-name/devcfg_a
adb shell dd if=/sdcard/devcfg.img of=/dev/block/bootdevice/by-name/devcfg_b
adb push hyp.img /sdcard/hyp.img
adb shell dd if=/sdcard/hyp.img of=/dev/block/bootdevice/by-name/hyp_a
adb shell dd if=/sdcard/hyp.img of=/dev/block/bootdevice/by-name/hyp_b
adb push keymaster.img /sdcard/keymaster.img
adb shell dd if=/sdcard/keymaster.img of=/dev/block/bootdevice/by-name/keymaster_a
adb shell dd if=/sdcard/keymaster.img of=/dev/block/bootdevice/by-name/keymaster_b
adb push xbl.img /sdcard/xbl.img
adb shell dd if=/sdcard/xbl.img of=/dev/block/bootdevice/by-name/xbl_a
adb shell dd if=/sdcard/xbl.img of=/dev/block/bootdevice/by-name/xbl_b
adb push xbl_config.img /sdcard/xbl_config.img
adb shell dd if=/sdcard/xbl_config.img of=/dev/block/bootdevice/by-name/xbl_config_a
adb shell dd if=/sdcard/xbl_config.img of=/dev/block/bootdevice/by-name/xbl_config_b
REMEMBER
"Invalid sparce file format at header magic" is not an error, you need to wait a bit when you see that string, just wait.
These ROMs can't be used to update or downgrade your phone but just to restore your phone, so don't use them to come back to oreo or to update from oreo to pie.
If you want to rebrand your phone from HydrogenOS to OxygenOS you can follow this guide: Rebrand Guide
If you want you can use also my tool to flash Factory Images, unlock bootloader, flash twrp or to understand if the device is recognized: https://toolaio.tk/
Thanks to @SaiBork for first time tested
If you got some problems like write error or no partition, check this: https://forum.xda-developers.com/showpost.php?p=76658555&postcount=34
Thanks to @Dark Nightmare for T-Mobile Rom Version
DONATE LINK
If you want to support this and others my projects please consider making a donation, thanks.
If you are unable to use pools or moneybox, you can also make a normal donation, all private donations will be added in the moneybox:
​

Thanks Mister :good:

Great work, thx

This is great work. Thanks!

If anyone has the T-Mobile firmware or OTA captured, please post it.

Would it be wise to extract the zip to the 6T prior to rooting just in case something goes wrong?

shizat63 said:
Would it be wise to extract the zip to the 6T prior to rooting just in case something goes wrong?
Click to expand...
Click to collapse
This fastboot rom are completely stock rom, not modified

mauronofrio said:
This fastboot rom are completely stock rom, not modified
Click to expand...
Click to collapse
Right.
So before rooting the device, would it be good to copy the images from this zip to a dir on the 6T in case something goes wrong with the rooting process? For example if Magisk or TWRP mess something up, and the 6T is in a bootloop.
Or are the images in the zip only for flashing from your PC to the 6T? So it would be of no use to have the images sitting on the 6T as a backup.

Hello. after flashing with flash-all.bat, my 6T just boots to the bootloader unlocked warning and stays there. I don't know what to do next.
EDIT: Nevermind, after trying again it worked.

shizat63 said:
Right.
So before rooting the device, would it be good to copy the images from this zip to a dir on the 6T in case something goes wrong with the rooting process? For example if Magisk or TWRP mess something up, and the 6T is in a bootloop.
Or are the images in the zip only for flashing from your PC to the 6T? So it would be of no use to have the images sitting on the 6T as a backup.
Click to expand...
Click to collapse
Actually there is not a twrp that support decryption so if you also have the images on the phone you can't flash it in twrp mode. At this moment these roms can be only flashed through fastboot with a pc
Seoyoon said:
Hello. after flashing with flash-all.bat, my 6T just boots to the bootloader unlocked warning and stays there. I don't know what to do next.
EDIT: Nevermind, after trying again it worked.
Click to expand...
Click to collapse
Perfect:good:

thank you thank you thank you OP! Nearly bricked my phone while trying to install root (something got messed up with TWRP) and I couldn't even get out of bootloader into recovery. I just got my phone a few hours ago, that would have been sad

nhshah7 said:
thank you thank you thank you OP! Nearly bricked my phone while trying to install root (something got messed up with TWRP) and I couldn't even get out of bootloader into recovery. I just got my phone a few hours ago, that would have been sad
Click to expand...
Click to collapse
Perfect:good:
If you want to support this and others my projects please consider making a donation, thanks.

After using flash-all.bat I'm getting the "Your device is corrupt" red error message on boot. I can skip by pressing power twice and phone boots normally.
I see people with 6 had to use MSM download tool to get rid of the error.
Is there any solution for 6T?

nhshah7 said:
thank you thank you thank you OP! Nearly bricked my phone while trying to install root (something got messed up with TWRP) and I couldn't even get out of bootloader into recovery. I just got my phone a few hours ago, that would have been sad
Click to expand...
Click to collapse
Just for the sake of your sanity in the future, if you can get to bootloader and device files are available, you can always get it up and running. I learned that very quickly way back in the day

iaTa said:
After using flash-all.bat I'm getting the "Your device is corrupt" red error message on boot. I can skip by pressing power twice and phone boots normally.
I see people with 6 had to use MSM download tool to get rid of the error.
Is there any solution for 6T?
Click to expand...
Click to collapse
Only msm tool i think

Well same situation here got boot loop trying to root then after install using flashall.bat now I can't get a VOLTE and now I complete lost signal but when I swap my sim card to sim slot 2 everything work...kinda weir but does anyone know how to fix it?

_BГ@ckθut said:
Well same situation here got boot loop trying to root then after install using flashall.bat now I can't get a VOLTE and now I complete lost signal but when I swap my sim card to sim slot 2 everything work...kinda weir but does anyone know how to fix it?
Click to expand...
Click to collapse
Did you have a branded version?

mauronofrio said:
Did you have a branded version?
Click to expand...
Click to collapse
Oh I has unlock one from on plus website and use it on Verizon...is that what u mean...sorry I'm new to OP device
Edit: I try to do fastboot flash modem A and B also factory reset but seem not work...

_BГ@ckθut said:
Oh I has unlock one from on plus website and use it on Verizon...is that what u mean...sorry I'm new to OP device
Click to expand...
Click to collapse
Branded version are different, they have a particoular partitions for volte, i think the only.method to solve your problem is to find another person with the same branded device and make a partitions backup that you can restore

mauronofrio said:
Branded version are different, they have a particoular partitions for volte, i think the only.method to solve your problem is to find another person with the same branded device and make a partitions backup that you can restore
Click to expand...
Click to collapse
So how do I make that? Do I need provide any information or anything?

Fix IMEI and Network

Extract this zip and place all files in your minimal adb and fastboot folder .
Reboot in to twrp and wipe system , vendor , data , cache , dalvick cache.
Reboot in to fastboot mode.
Run Fastboot commands ,
Commands :
fastboot flash config config.bin
fastboot flash misc misc.img
fastboot flash modemst1 dummy.img
fastboot flash modemst2 dummy.img
fastboot flash dsp adspso.bin
fastboot flash mdtp mdtp.img
fastboot flash modem NON-HLOS.bin
fastboot flash cache cache.img
fastboot flash cust cust.img
Reboot in to twrp recovery
Now flash Xiaomi.eu OREO rom.
Reboot system , your network must work now. Fixed my xiaomi.eu oreo network and calling issue. No more unknown baseband.
If you are already having fastboot rom then no need to download these files from this link. Just extract from fastboot rom and paste in minimal adb and fastboot folder.
Link for files :
https://drive.google.com/file/d/1-0i1QMO_2c6LVxEazcpPEC1cG3EOe7ie/view?usp=drivesdk
NOHLOS.bin
Edit : NOHLOS.bin file get corrupted so uploaded seperate. NOHLOS.bin link :
https://drive.google.com/file/d/1-2CevvtQZ_966UKh76fFvCWkKq6CTW3_/view?usp=drivesdk

sumit17 said:
Extract this zip and place all files in your minimal adb and fastboot folder .
Reboot in to twrp and wipe system , vendor , data , cache , dalvick cache.
Reboot in to fastboot mode.
Run Fastboot commands ,
Commands :
fastboot flash config config.bin
fastboot flash misc misc.img
fastboot flash modemst1 dummy.img
fastboot flash modemst2 dummy.img
fastboot flash dsp adspso.bin
fastboot flash mdtp mdtp.img
fastboot flash modem NON-HLOS.bin
fastboot flash cache cache.img
fastboot flash cust cust.img
Reboot in to twrp recovery
Now flash Xiaomi.eu OREO rom.
Reboot system , your network must work now. Fixed my xiaomi.eu oreo network and calling issue. No more unknown baseband.
If you are already having fastboot rom then no need to download these files from this link. Just extract from fastboot rom and paste in minimal adb and fastboot folder.
Link for files :
https://drive.google.com/file/d/1-0i1QMO_2c6LVxEazcpPEC1cG3EOe7ie/view?usp=drivesdk
Click to expand...
Click to collapse
The solution you offer is definitely working. Thank you so much...

wrbn said:
The solution you offer is definitely working. Thank you so much...
Click to expand...
Click to collapse
Always Welcome Brother.

my redmi y2 0 imei
Sir can it fix null imei please give me any fix of 0 imei

bitturathi645 said:
Sir can it fix null imei please give me any fix of 0 imei
Click to expand...
Click to collapse
This can work if you do this. It's worth trying.

flash nhi ho rhi miui eu rom how it fixed
flashing error

bitturathi645 said:
flashing error
Click to expand...
Click to collapse
Whats error you are facing?

error 7
not install in correct device
---------- Post added at 06:06 PM ---------- Previous post was at 06:03 PM ----------
my mobile show unknown efs and unknown imei

bitturathi645 said:
not install in correct device
---------- Post added at 06:06 PM ---------- Previous post was at 06:03 PM ----------
my mobile show unknown efs and unknown imei
Click to expand...
Click to collapse
Redmi Y2/s2 device only.
Drivers installed in pc , check by command prompt in fastboot mode
Commands
Fastboot devices
You can contact in telegram group.
t.me/redmiS2G

Thank you
wrbn said:
The solution you offer is definitely working. Thank you so much...
Click to expand...
Click to collapse
Thank you so much I could repair it

file corrupted NON-HLOS.bin

LsoaresA said:
file corrupted NON-HLOS.bin
Click to expand...
Click to collapse
https://drive.google.com/file/d/1-2CevvtQZ_966UKh76fFvCWkKq6CTW3_/view?usp=drivesdk

thank you, now it's working.

Why it still 0 my IMEI

sumit17 said:
Extract this zip and place all files in your minimal adb and fastboot folder .
Reboot in to twrp and wipe system , vendor , data , cache , dalvick cache.
Reboot in to fastboot mode.
Run Fastboot commands ,
Commands :
fastboot flash config config.bin
fastboot flash misc misc.img
fastboot flash modemst1 dummy.img
fastboot flash modemst2 dummy.img
fastboot flash dsp adspso.bin
fastboot flash mdtp mdtp.img
fastboot flash modem NON-HLOS.bin
fastboot flash cache cache.img
fastboot flash cust cust.img
Reboot in to twrp recovery
Now flash Xiaomi.eu OREO rom.
Reboot system , your network must work now. Fixed my xiaomi.eu oreo network and calling issue. No more unknown baseband.
If you are already having fastboot rom then no need to download these files from this link. Just extract from fastboot rom and paste in minimal adb and fastboot folder.
Link for files :
https://drive.google.com/file/d/1-0i1QMO_2c6LVxEazcpPEC1cG3EOe7ie/view?usp=drivesdk
NOHLOS.bin
Edit : NOHLOS.bin file get corrupted so uploaded seperate. NOHLOS.bin link :
https://drive.google.com/file/d/1-2CevvtQZ_966UKh76fFvCWkKq6CTW3_/view?usp=drivesdk
Click to expand...
Click to collapse
Hi, I am very much familiar to flashing roms through twrp of each and every device I purchase from Xiaomi since 2015. In my entire 4years of experience I made a small mistake name of redmi y2(3+32) flashed with pie ROM of EU through twrp, network issue faced, decided to revert back to latest MIUI global stable ROM(through fastboot method) and processed here I made simple untimely mistake which is I blindly proceeded with the flashing process flash all lock.bat instead of not opting to flash all.bat, this is the mistake I made, after completion of fastboot flashing same network issue happened even in the global stable ROM also(no network signals), I decided to unlock the bootloader but not able to do it because once Sim card inserted and detected then only if any one can bind their existing mi account, no detection of Sim card, only showing that please insert Sim card and try in the mi unlock device(developer options). This is the story and state of my device redmi y2, how to get rid of this situation, if you can understand my problem please help.
Regards

Hola, tengo un Redmi S2 y no reconoce las SIM card ni tampoco la red WLAN, he flasheado varias Room y probado todos los metodos pero no logro darle señal. Que puedo hacer, ya lo doy por muerto...

Mr Seshu said:
Hi, I am very much familiar to flashing roms through twrp of each and every device I purchase from Xiaomi since 2015. In my entire 4years of experience I made a small mistake name of redmi y2(3+32) flashed with pie ROM of EU through twrp, network issue faced, decided to revert back to latest MIUI global stable ROM(through fastboot method) and processed here I made simple untimely mistake which is I blindly proceeded with the flashing process flash all lock.bat instead of not opting to flash all.bat, this is the mistake I made, after completion of fastboot flashing same network issue happened even in the global stable ROM also(no network signals), I decided to unlock the bootloader but not able to do it because once Sim card inserted and detected then only if any one can bind their existing mi account, no detection of Sim card, only showing that please insert Sim card and try in the mi unlock device(developer options). This is the story and state of my device redmi y2, how to get rid of this situation, if you can understand my problem please help.
Regards
Click to expand...
Click to collapse
use test points to unlock bootloader.

After searching in many forums, I managed to enable the Wi-Fi, bluetooth and infrared port of my Redmi S2 by flashing the persist.bin file .... The problem I have is that the cell phone was left with IMEI 0, someone could guide me how to recover, repair or write a new IMEI for my Redmi S2?

sumit17 said:
Extract this zip and place all files in your minimal adb and fastboot folder .
Reboot in to twrp and wipe system , vendor , data , cache , dalvick cache.
Reboot in to fastboot mode.
Run Fastboot commands ,
Commands :
fastboot flash config config.bin
fastboot flash misc misc.img
fastboot flash modemst1 dummy.img
fastboot flash modemst2 dummy.img
fastboot flash dsp adspso.bin
fastboot flash mdtp mdtp.img
fastboot flash modem NON-HLOS.bin
fastboot flash cache cache.img
fastboot flash cust cust.img
Reboot in to twrp recovery
Now flash Xiaomi.eu OREO rom.
Reboot system , your network must work now. Fixed my xiaomi.eu oreo network and calling issue. No more unknown baseband.
If you are already having fastboot rom then no need to download these files from this link. Just extract from fastboot rom and paste in minimal adb and fastboot folder.
Link for files :
https://drive.google.com/file/d/1-0i1QMO_2c6LVxEazcpPEC1cG3EOe7ie/view?usp=drivesdk
NOHLOS.bin
Edit : NOHLOS.bin file get corrupted so uploaded seperate. NOHLOS.bin link :
https://drive.google.com/file/d/1-2CevvtQZ_966UKh76fFvCWkKq6CTW3_/view?usp=drivesdk
Click to expand...
Click to collapse
bro can you give me name of the files that scare please
for example: v9.x.x.x or v10.x.x.x
also correct name Xiaomi.eu OREO?

Thank u so much thought it was dead tried a lot of other stable roms none worked.Thank you for sharing the solution.
To others who are trying follow the steps properly
---------- Post added at 01:51 PM ---------- Previous post was at 01:47 PM ----------
tomelich said:
bro can you give me name of the files that scare please
for example: v9.x.x.x or v10.x.x.x
also correct name Xiaomi.eu OREO?
Click to expand...
Click to collapse
Download any rom that has the android version 8.1
I used https://xiaomi.eu/community/threads/9-1-10.48651/
---------- Post added at 02:21 PM ---------- Previous post was at 01:51 PM ----------
To boot TWRP use this guide https://forum.xda-developers.com/redmi-s2/how-to/guide-to-flash-twrp-unofficial-root-t3854906

Question What is the best and safest way to root Redmi 9 power?

If anyone having this phone got it rooted, please let me know here.
Also let me know if you faced any issues or problems while rooting

kelemaguy said:
If anyone having this phone got it rooted, please let me know here.
Also let me know if you faced any issues or problems while root
Click to expand...
Click to collapse

Are your Bootloader unlocked? If is not you can't Root your Phone!

Atanassoww said:
Are your Bootloader unlocked? If is not you can't Root your Phone!
Click to expand...
Click to collapse
Yes it's unlocked.

kelemaguy said:
Yes it's unlocked.
Click to expand...
Click to collapse
U need to Download Minimal ADB and Fastboot Tool First. When you download these files u need to open Minimal_ADB_Fastboot_v1.4.3.zip using WinRAR or 7Zip and run the Minimal ADB Fastboot v1.4.3.exe to Install the Tool (Don't forget to check this Option: Create a desktop icon!)
1.When the installation finishes go to the Directory of Minimal ADB and Fastboot:
------> C:/Program Files (x86)/Minimal ADB and Fastboot <------
2. Download the OrangeFox from the Link Below, open the Downloaded Archive with Name OrangeFox-R11.1-Stable-Unofficial-juice.zip, and drag the recovery.img to ------> C:/Program Files (x86)/Minimal ADB and Fastboot <------
3. Now run the Minimal ADB and Fastboot from your Desktop, boot your Phone to Fastboot Mode using Power Button+Volume Down, connect your Phone to the Laptop/Computer using the USB Cable, type Fastboot flash recovery recovery.img and click Enter.
4. Now boot your phone and Download the Magisk from the Link Below. When you Download the Magisk go to your File Manager or Download ZArchiver from the Play Store, go to your Download folder and rename the Magisk-v23.0.apk to
-----> Installer.zip <-----
5. Now boot to the OrangeFOX Recovery and try to Flash the Installer.zip file
6. Important! To Flash your device you need to sing in with your mi account in Mi Flash PRO!
7. Enjoy!
Download OrangeFox from Here for Redmi 9T/Power (Juice):
Download​
Download Minimal ADB and Fastboot Tool:
Download​
Download Magisk:
Download​

Atanassoww said:
U need to Download Minimal ADB and Fastboot Tool First. When you download these files u need to open Minimal_ADB_Fastboot_v1.4.3.zip using WinRAR or 7Zip and run the Minimal ADB Fastboot v1.4.3.exe to Install the Tool (Don't forget to check this Option: Create a desktop icon!)
1.When the installation finishes go to the Directory of Minimal ADB and Fastboot:
------> C:/Program Files (x86)/Minimal ADB and Fastboot <------
2. Download the OrangeFox from the Link Below, open the Downloaded Archive with Name OrangeFox-R11.1-Stable-Unofficial-juice.zip, and drag the recovery.img to ------> C:/Program Files (x86)/Minimal ADB and Fastboot <------
3. Now run the Minimal ADB and Fastboot from your Desktop, boot your Phone to Fastboot Mode using Power Button+Volume Down, connect your Phone to the Laptop/Computer using the USB Cable, type Fastboot flash recovery recovery.img and click Enter.
4. Now boot your phone and Download the Magisk from the Link Below. When you Download the Magisk go to your File Manager or Download ZArchiver from the Play Store, go to your Download folder and rename the Magisk-v23.0.apk to
-----> Installer.zip <-----
5. Now boot to the OrangeFOX Recovery and try to Flash the Installer.zip file
6. Important! To Flash your device you need to sing in with your mi account in Mi Flash PRO!
7. Enjoy!
Download OrangeFox from Here for Redmi 9T/Power (Juice):
Download​
Download Minimal ADB and Fastboot Tool:
Download​
Download Magisk:
Download​
Click to expand...
Click to collapse
Thank you. But can I know the difference Between TWRP and OrangeFox? Since many people on YouTube used TWRP for rooting also it seems simpler than OrangeFox. Can I use TWRP instead of OrangeFox?

kelemaguy said:
Thank you. But can I know the difference Between TWRP and OrangeFox? Since many people on YouTube used TWRP for rooting also it seems simpler than OrangeFox. Can I use TWRP instead of OrangeFox?
Click to expand...
Click to collapse
Yes!

Here you can choose which Custom Rom to install: Redmi 9T/Redmi Note 9 4G/Redmi 9 Power/Poco M3 (Juice) Custom Roms

Did you manage to install some Rom?

I have a question , I want to debrand a redmi 9t , with bootloader locked, now , the procedure doesn't works .
The phone boot only in fastboot or in "the system was destroyed" it's possible to boot il normally?

When i Try to flash any kind of recovery. When i boot to recovery i get a blank screen before the phone switches off

kelemaguy said:
Thank you. But can I know the difference Between TWRP and OrangeFox? Since many people on YouTube used TWRP for rooting also it seems simpler than OrangeFox. Can I use TWRP instead of OrangeFox?
Click to expand...
Click to collapse
Atanassoww said:
U need to Download Minimal ADB and Fastboot Tool First. When you download these files u need to open Minimal_ADB_Fastboot_v1.4.3.zip using WinRAR or 7Zip and run the Minimal ADB Fastboot v1.4.3.exe to Install the Tool (Don't forget to check this Option: Create a desktop icon!)
1.When the installation finishes go to the Directory of Minimal ADB and Fastboot:
------> C:/Program Files (x86)/Minimal ADB and Fastboot <------
2. Download the OrangeFox from the Link Below, open the Downloaded Archive with Name OrangeFox-R11.1-Stable-Unofficial-juice.zip, and drag the recovery.img to ------> C:/Program Files (x86)/Minimal ADB and Fastboot <------
3. Now run the Minimal ADB and Fastboot from your Desktop, boot your Phone to Fastboot Mode using Power Button+Volume Down, connect your Phone to the Laptop/Computer using the USB Cable, type Fastboot flash recovery recovery.img and click Enter.
4. Ahora inicie su teléfono y descargue Magisk desde el enlace a continuación. Cuando descargue Magisk, vaya a su Administrador de archivos o descargue ZArchiver desde Play Store , vaya a su carpeta de descargas y cambie el nombre de Magisk-v23.0.apk a
-----> Installer.zip <-----
5. Ahora inicie la recuperación de OrangeFOX e intente actualizar el archivo Installer.zip
6. ¡Importante! ¡Para flashear su dispositivo, debe iniciar sesión con su cuenta mi en Mi Flash PRO!
7. ¡Disfruta!
Descargue OrangeFox desde aquí para Redmi 9T / Power (Juice):
Descargar​
Descargue la herramienta Minimal ADB y Fastboot:
Descargar​
Descarga Magic:
Descargar​
Click to expand...
Click to collapse
mine is pomelo, it doesn't work right?

kelemaguy said:
Thank you. But can I know the difference Between TWRP and OrangeFox? Since many people on YouTube used TWRP for rooting also it seems simpler than OrangeFox. Can I use TWRP instead of OrangeFox?
Click to expand...
Click to collapse
They work the same way. But I prefer OrangeFOX.
CLEAN FLASH Instructions:
Format Data
Flash latest MIUI Weekly
Flash ROM zip
Flash Gapps (for Vanilla build)
Format Data
Reboot System

kelemaguy said:
If anyone having this phone got it rooted, please let me know here.
Also let me know if you faced any issues or problems while rooting
Click to expand...
Click to collapse
Search youtube for "Tech InfoMania"
I've rooted it following the video success.
Thank you very much., edmond