Database Develop

OnePlus 3T Recovery Loop

Hello lovely XDA-members,
this morning a new OTA update/patch came out for my OnePlus 3T, so I downloaded and tryed to install it right away. My phone is rooted on android 7.0 and I have TWRP 3.0.3-0 installed as my recovery. Normally (when I updated to nougat) after downloading a new update the phone reboots itself into TWRP and installs the update by itself, but not this time. I had to seqrch through my phone and had to install thw update manually. After that I rebooted the phone and it started booting the TWRP recovery again, I tried it again and again and again, nothint changed. So I tried to restore my backup with everything functioning, but this wouldnt help either. :/ I read the few existing threads with this problem and heard of a recovery flag that isnt cleared and the bootloader being the problem. One solution that I found was only for an LG phone and I'm afraid that I'll brick my brand new phone I have absolutely no idea what to do now, I would be so happy if someone could help me with this :$
I thank you in advance <3

Encoutered the same problem. Either you reflash the official or twrp recovery (neither did the trick to me) or use this "emergency tool" (which helped me):
https://forums.oneplus.net/threads/unbrick-guide-oneplus-3t.481214/
Btw: TWRP 3.0.3-0 is not working well, switch to 3.0.3-1 beta

Good luck to you

I had the same problem.
How you can ''unbrick it'':
1. Flash a any rom available for the oneplus 3t via twrp
a. after this you will be still in twrp bootloop, to solve this go to step 2
2. Flash back stock recovery via twrp
Now your system will boot again
Optional: Flash back twrp

Just flash stock recovery via adb and you're done. It will fix the problem, you won't lose any data

Isus <3 said:
Just flash stock recovery via adb and you're done. It will fix the problem, you won't lose any data
Click to expand...
Click to collapse
@Isus <3 and @koentdm Do you have a download for the stock recovery, cause the oneplus download-site isnt working and I cant find any other downloads for it

EYT said:
@Isus <3 and @koentdm Do you have a download for the stock recovery, cause the oneplus download-site isnt working and I cant find any other downloads for it
Click to expand...
Click to collapse
https://drive.google.com/file/d/0B0pr-ZA5b-1pNVlxV3ljMUFaUHc/view

Thank you so much, it worked

EYT said:
Thank you so much, it worked
Click to expand...
Click to collapse
No problemos my friendos

Need super help - Mi 8 -System has been destroyed

Hi all
Sorry that my vocabulary wont be so pro.
I flashed yesterday EU stable rom 10.0.1.0.
Today I flashed back global 8.8.30 using twrp, wiped data and it has finish ok, but made loop boot and backed to twrp once again.
then flashed 9.5.13.0 global, ended OK, didn't boot well and backed me to recovery screen.
by ADB I tried to go back to TWRP and it boot to "the system has been destroyed".
Nothing i do not help, by info with ADB looks like the bootlouder is closed some how.
I cannot open in since it is writing me that the account not connected to the to the phone, and i cannot do anything since the phone is not going up.
any ideas?

dorone said:
Hi all
Sorry that my vocabulary wont be so pro.
I flashed yesterday EU stable rom 10.0.1.0.
Today I flashed back global 8.8.30 using twrp, wiped data and it has finish ok, but made loop boot and backed to twrp once again.
then flashed 9.5.13.0 global, ended OK, didn't boot well and backed me to recovery screen.
by ADB I tried to go back to TWRP and it boot to "the system has been destroyed".
Nothing i do not help, by info with ADB looks like the bootlouder is closed some how.
I cannot open in since it is writing me that the account not connected to the to the phone, and i cannot do anything since the phone is not going up.
any ideas?
Click to expand...
Click to collapse
if this is a Chinese version phone, you need to flash the region fix, and also the dm-verity disabler after the ROM and also wipe DATA.

Agimax said:
if this is a Chinese version phone, you need to flash the region fix, and also the dm-verity disabler after the ROM and also wipe DATA.
Click to expand...
Click to collapse
Hi
many thanks for your answer
How i am doing it?
phone is not working, not twrp.
tried now to flash chinese last rom - nogo

dorone said:
Hi
many thanks for your answer
How i am doing it?
phone is not working, not twrp.
tried now to flash chinese last rom - nogo
Click to expand...
Click to collapse
If you don't have TWRP anymore, and MIflashtool isn't working, then if your phone is still unlocked, flash the TWRP again through fastboot. If not, i'm not sure.
I have a Chinese to Global thread here-->https://forum.xda-developers.com/mi-8/help/chinese-mi8-to-global-instructions-t3839665

10.0.1.0 has ARB hasn't it?

_katho_ said:
10.0.1.0 has ARB hasn't it?
Click to expand...
Click to collapse
I not 100% sure but I will go for that also, its sad but probably he screw his phone.
1. he confirm he have locked bootloader
2. no access to system nor miflash detect so no bootloader unlock
3. no bootloader, so no flashing twrp.
I dont have any good news, nor any solution to even help you.

freeman94 said:
I not 100% sure but I will go for that also, its sad but probably he screw his phone.
Click to expand...
Click to collapse
Yep, everywhere I've seen MIUI 10 10.x stable have ARB. It's the reason I haven't flashed it, as I read before..

Mi 9 Restoring firmware

TLDR: I tried installing AEX rom and I bricked my mi9, getting it in a fastboot loop. Flashed a bunch of things and now I think my firmware is messed up. Help.
First I flashed TWRP, then I flashed the AEX rom and gapps, but phone got in bootloop, then I tried just flashing the ROM and it worked. After I flashed gaps it got into bootloop again.
Then I read the instructions from the AEX thread and I flash the recommended Firmware file (v9.6.13), and the flash failed.
I wiped everything, reflashed the ROM without gapps, and at restart the phone. Got stuck in fastboot.
Tried reinstalling TWRP with no success. Tried flashing MIUI with their flash tool but it didn't ended the flash procedure even after 20 minutes...
I tried to directly boot the recovery image (TWRP) and I was surprised that the phone booted in MIUI, but wifi wasn't working. Did not test anything else. Restarting the phone got me again in fastboot loop.
I tried again flashing with mi flash tool and this time was succesfull.
Then I tried to flash a MIUI eu ROM and got the phone again in fastboot loop. Flash was succesfull, but when restarting TWRP said that there is no OS installed.
I decided to give up and flash global MIUI 10.2.13 back.
But now my phone has some problems. Auto brightness doesn't work and video recording freezes the camera app when image stabilization is enabled.
So, is there a way to reflash 10.2.13 rom firmware using mi flash tool?
I suppose the first Firmware flash that was unsuccessful messed the firmware up...
Or how do I get my phone back to factory status...
I suppose v9.6.13 firmware is China developer and was an upgrade and that I should downgrade to 10.2.13 rom firmware.
Or flashing developer global will solve the problem? And how do I do that?
TWRP: https://forum.xda-developers.com/Mi-9/development/recovery-twrp-3-3-1-siankatabg-t3934962
AEX: https://forum.xda-developers.com/Mi-9/development/rom-aospextended-v6-6-t3956100

Have you ever tried fastboot rom ? Now it's the only solution to recover your phone !

macgyverx86 said:
TLDR: I tried installing AEX rom and I bricked my mi9, getting it in a fastboot loop. Flashed a bunch of things and now I think my firmware is messed up. Help.
First I flashed TWRP, then I flashed the AEX rom and gapps, but phone got in bootloop, then I tried just flashing the ROM and it worked. After I flashed gaps it got into bootloop again.
Then I read the instructions from the AEX thread and I flash the recommended Firmware file (v9.6.13), and the flash failed.
I wiped everything, reflashed the ROM without gapps, and at restart the phone. Got stuck in fastboot.
Tried reinstalling TWRP with no success. Tried flashing MIUI with their flash tool but it didn't ended the flash procedure even after 20 minutes...
I tried to directly boot the recovery image (TWRP) and I was surprised that the phone booted in MIUI, but wifi wasn't working. Did not test anything else. Restarting the phone got me again in fastboot loop.
I tried again flashing with mi flash tool and this time was succesfull.
Then I tried to flash a MIUI eu ROM and got the phone again in fastboot loop. Flash was succesfull, but when restarting TWRP said that there is no OS installed.
I decided to give up and flash global MIUI 10.2.13 back.
But now my phone has some problems. Auto brightness doesn't work and video recording freezes the camera app when image stabilization is enabled.
So, is there a way to reflash 10.2.13 rom firmware using mi flash tool?
I suppose the first Firmware flash that was unsuccessful messed the firmware up...
Or how do I get my phone back to factory status...
I suppose v9.6.13 firmware is China developer and was an upgrade and that I should downgrade to 10.2.13 rom firmware.
Or flashing developer global will solve the problem? And how do I do that?
TWRP: https://forum.xda-developers.com/Mi-9/development/recovery-twrp-3-3-1-siankatabg-t3934962
AEX: https://forum.xda-developers.com/Mi-9/development/rom-aospextended-v6-6-t3956100
Click to expand...
Click to collapse
Hmm, so where are you at now!? Have you got twrp installed? and 10.2.13 but with issues, right? or are you on stock recovery?

Current status: I managed to flash fastboot global ROM in mi flash, and stock recovery.
But the firmware is messed up.
Camera doesn't work well. And from normal use I saw that Gyroscope, light sensor and compas aren't working at all...
Phone reboots itself and I can't unlock it because pattern isn-t recognized anymore, untill I reset it by long pressing the power button.
From CIT menu gyro, light sensor and compass are definitely not working.
Would flashing latest firmware from TWRP be a possible solution? My bootloader is still unlocked and I can flash TWRP.
Or should I format vendor partition first? And then flash firmware?
Fastboot flash did solved firmware problem.

macgyverx86 said:
Current status: I managed to flash fastboot global ROM in mi flash, and stock recovery.
But the firmware is messed up.
Camera doesn't work well. And from normal use I saw that Gyroscope, light sensor and compas aren't working at all...
Phone reboots itself and I can't unlock it because pattern isn-t recognized anymore, untill I reset it by long pressing the power button.
From CIT menu gyro, light sensor and compass are definitely not working.
Would flashing latest firmware from TWRP be a possible solution? My bootloader is still unlocked and I can flash TWRP.
Or should I format vendor partition first? And then flash firmware?
Fastboot flash did solved firmware problem.
Click to expand...
Click to collapse
To be honest I'm not entirely sure if it'll help, but, I'd put global stable flashable zip on otg, then I'd flash twrp again, boot to twrp using buttons not commands, wipe cache, dalvik, vendor, system, data, internal. Then format data, swiping with confirmation 'yes'. Then flash latest global again over the clean device from otg. You could try using mauronfrio's twrp 3.3.1-35 instead of the one you linked get it here. That's just what I'd try, can't say whether it'll help and no guarantees it'll fix anything... Let us know the outcome bud.
You can download the latest flashable rom from here
I can't see why ur sensors etc aren't working anymore, it's got to be all software related me thinks
Do not try to reboot after wipes, you'll have nothing installed

reg66 said:
... I'd put global stable flashable zip on otg, then I'd flash twrp again, boot to twrp using buttons not commands, wipe cache, dalvik, vendor, system, data, internal. Then format data, swiping with confirmation 'yes'. Then flash latest global again over the clean device from otg. ....
Click to expand...
Click to collapse
Correct me if I am wrong, but flashing a stock MIUI zip form twrp won't work.
Or you are saying that I should flash a xiaomi eu ROM?

Got another sugestion:
Someone said that there is the posibility that mi flash didn't flash persist partition and that I should try to force flash it.
Referred thread here: https://forum.xda-developers.com/re.../how-to-flash-persist-partiton-redmi-t3830310
Is this a possibility?
And shouldn't mi flash reflash everything?

macgyverx86 said:
Correct me if I am wrong, but flashing a stock MIUI zip form twrp won't work.
Or you are saying that I should flash a xiaomi eu ROM?
Click to expand...
Click to collapse
Hold tight bud, just checking. I remember doing that - and the stock rom flashes but you no longer have twrp, it flashes the whole system/vendor including recovery. But hang on 'cos I might be recalling my pocophone F1 for that proceedure. The reason I suggest to reflash twrp is simply to have better control over a fully clean wipe, before progressing to flash rom again. Like I say, hang on just checking...
---------- Post added at 08:49 PM ---------- Previous post was at 08:47 PM ----------
macgyverx86 said:
Got another sugestion:
Someone said that there is the posibility that mi flash didn't flash persist partition and that I should try to force flash it.
Referred thread here: https://forum.xda-developers.com/re.../how-to-flash-persist-partiton-redmi-t3830310
Is this a possibility?
And shouldn't mi flash reflash everything?
Click to expand...
Click to collapse
Yes, miflash should flash everything, but you say you started flashing other stuff when it all went wrong, so I'm really not sure what's happened to ur device. Hang on anyway, still checking on the flashable zip ..
---------- Post added at 09:06 PM ---------- Previous post was at 08:49 PM ----------
Nope, I think you're right, it was the poco I was getting muddled with - haven't had to do this in while (poco has flashable stock zips somewhere...). It is possible to do it with lazy flasher, but that may start getting messy again. Have you tried re-flashing fastboot? Can you wipe much at all in the stock recovery - again, I can't remember.
Failing that, yeah, I'd seriously consider flashing twrp and flashing mi-globe or eu rom. I prefer mi-globe (although currently using beast rom) over eu simply because you can customize it more on the website. Though, I wouldn't recommend pre-rooting it. Root after, if need be. Any way, we'll cross that bridge later... For now just try to re-flash

reg66 said:
Can you wipe much at all in the stock recovery - again, I can't remember.
Click to expand...
Click to collapse
Didn't get this.
Is it ok to format vendor partition? will it be recreated wen flashing again? using mi flash or from twrp?

macgyverx86 said:
Didn't get this.
Is it ok to format vendor partition? will it be recreated wen flashing again? using mi flash or from twrp?
Click to expand...
Click to collapse
I'm pretty sure you won't be able to wipe much in stock recovery, but just wipe what you can and try and re-flash fastboot. Don't flash twrp yet. You could try downloading again the fastboot file, in case of any corruption. Hopefully on the second flash all will be well. But that said, it should've been OK on the first flash :/ in theory

just flashed xiaomi eu rom and everything seems to work now. All sensors are working.
I had to disable signature check, and i got an mounting /system error -> got the message that is installed without changes... whatever that means
And now in TWRP, I think, my files are encrypted without enabling it.
Will try other roms later.
Thanks for the help.

macgyverx86 said:
just flashed xiaomi eu rom and everything seems to work now. All sensors are working.
I had to disable signature check, and i got an mounting /system error -> got the message that is installed without changes... whatever that means
And now in TWRP, I think, my files are encrypted without enabling it.
Will try other roms later.
Thanks for the help.
Click to expand...
Click to collapse
Glad you got it working, phew!

macgyverx86 said:
just flashed xiaomi eu rom and everything seems to work now. All sensors are working.
I had to disable signature check, and i got an mounting /system error -> got the message that is installed without changes... whatever that means
And now in TWRP, I think, my files are encrypted without enabling it.
Will try other roms later.
Thanks for the help.
Click to expand...
Click to collapse
Go the same problem as you,i tried Android Q beta rom and after reflashing stock fastboot rom with mi flash,the sensors and video not working,any solution?

gm007 said:
Go the same problem as you,i tried Android Q beta rom and after reflashing stock fastboot rom with mi flash,the sensors and video not working,any solution?
Click to expand...
Click to collapse
I just flashed Xiaomi EU rom, did a CIT test and all sensors were working.
Try that. I'm curious it it works for you.

macgyverx86 said:
I just flashed Xiaomi EU rom, did a CIT test and all sensors were working.
Try that. I'm curious it it works for you.
Click to expand...
Click to collapse
Yes it worked with eu rom,but i managed to fix it on stock global stable by flashing an old miui 10.2.6 fastboot rom,Than updated to the latest one 10.2.13

gm007 said:
Yes it worked with eu rom,but i managed to fix it on stock global stable by flashing an old miui 10.2.6 fastboot rom,Than updated to the latest one 10.2.13
Click to expand...
Click to collapse
So 10.2.13 fastboot image is to blame here.

macgyverx86 said:
So 10.2.13 fastboot image is to blame here.
Click to expand...
Click to collapse
Not sure maybe flashing eu rom first have fix it .

SHRP Recovery bootloop after flashing a ROM (although rom is fine)

Hello,
As the title suggests, I've flashed a custom rom (EvolutionX to be exact), upon booting it up, mediatek Ims stops working, but that appears only on boot so it's not that big of a deal.
However, Upon rebooting into recovery (through system or via vol up+power) i get greeted by the SHRP logo but it powers off and on.
Fastboot mode works just fine, ROM works too, the recovery doesnt want to work though. I had the phone modded for 2 weeks and this is the first time this happened.
Any idea on i can fix it? I've already tried flashing the same recovery via fastboot but to no avail, i get an error saying:
fastboot: error: cannot load 'SHRP_v3.1_stable-Official_CD6-1630047089': Permission denied
That's weird, because my phone has an unlocked bootloader.
Any help would be greatly appreciated!

Friend Maybe you had a small error in the firmware of your device, if I'm not mistaken I think that later the equipment will be in a hardbrick and you will have to wait for the bootloop cycle to pass, which is when the battery runs out and you will have to resort to SP Flash Tool to fix mobile
I hope I have helped you, it is something that I have learned

HaroldTech312 said:
Friend Maybe you had a small error in the firmware of your device, if I'm not mistaken I think that later the equipment will be in a hardbrick and you will have to wait for the bootloop cycle to pass, which is when the battery runs out and you will have to resort to SP Flash Tool to fix mobile
I hope I have helped you, it is something that I have learned
Click to expand...
Click to collapse
i will try flashing stock xiaomi and then install a custom rom again

NewtonPL said:
i will try flashing stock xiaomi and then install a custom rom again
Click to expand...
Click to collapse
try it I can't guarantee you anything but if it comes back and the same thing happens it means that the rom is not compatible with your mobile and you will have to look for another one
If you still have doubts tell me that I can try to help you

the ROM was glitchy and broke the recovery, i flashed miui a11 and flashed everything again, works now

NewtonPL said:
the ROM was glitchy and broke the recovery, i flashed miui a11 and flashed everything again, works now
Click to expand...
Click to collapse
did you flash the .zip using the SHRP recovery or did you use the fastboot method? I just used the Install Magisk feature and now my phone it bootlooping. I can enter the SHRP and fastboot. It just bootloop after the lock icon disappears.

Mineplayerminer said:
did you flash the .zip using the SHRP recovery or did you use the fastboot method? I just used the Install Magisk feature and now my phone it bootlooping. I can enter the SHRP and fastboot. It just bootloop after the lock icon disappears.
Click to expand...
Click to collapse
what zip? this isnt about magisk mate.

NewtonPL said:
what zip? this isnt about magisk mate.
Click to expand...
Click to collapse
I mean the MIUI ROM in zip. But I figured it out, I unbricked mine by installing the MIUI from the SHRP.

Question Stuck in fastboot after trying to install PixelExperience :(

Hey everyone
I recently got this phone and went through the bootloader unlock process.
I then tried to follow the instructions on this page https://wiki.pixelexperience.org/devices/rosemary/install/ to get this rom installed but somehow ****ed it up.
Everything went well until I tried to flash the recovery img from this page: https://get.pixelexperience.org/rosemary (i downloaded the 13 plus recovery img).
I flashed the img via fastboot but after that I got stuck in fastboot. The phone is stuck in a bootloop when I try to reboot into recovery or normal boot. The only thing I can get back into is fastboot.
Would really appreciate any help to get the phone working again. Im not new to android custom roms but Im new to xiaomi phones and Im a little lost
Thanks.

OK nevermind I successfully got the phone booting again with miflash tool by reflashing an official firmware...

Greetings!
You can install the rom via adb sideload too. Put on some random recovery (see my tutorial here: https://forum.xda-developers.com/t/twrp-on-android-12.4522273/), and start adb sideload.
Then,
adb sideload insert_package_name.zip
Click to expand...
Click to collapse
Hope it helps! ; D

dona3000 said:
Hey everyone
I recently got this phone and went through the bootloader unlock process.
I then tried to follow the instructions on this page https://wiki.pixelexperience.org/devices/ros mary/install/ to get this rom installed but somehow ****ed it up.
Everything went well until I tried to flash the recovery img from this page: https://get.pixelexperience.org/rosemary (i downloaded the 13 plus recovery img).
I flashed the img via fastboot but after that I got stuck in fastboot. The phone is stuck in a bootloop when I try to reboot into recovery or normal boot. The only thing I can get back into is fastboot.
Would really appreciate any help to get the phone working again. Im not new to android custom roms but Im new to xiaomi phones and Im a little lost
Thanks.
Click to expand...
Click to collapse
Did u make sure ur on Miui 12.5.16.0.RKLMIXM?

I'm also having similar problem and circumstance, may I ask where did you find the official firmware and/or recovery img for the Redmi note 10s

fol!s said:
I'm also having similar problem and circumstance, may I ask where did you find the official firmware and/or recovery img for the Redmi note 10s
Click to expand...
Click to collapse
Greetings!
As this phone has an MTK processor, we don't really have a recovery image, it's stored in the boot img I suppose. That link, you can download the official rom to this. DISCLAIMER: There are two types of ROMs listed here, one type is fastboot, that you need now in order to flash it through a computer for example. The another type is the recovery rom, that you can flash from recovery like a magisk package, or anything flashable zip, or with adb sideload.
https://mifirm.net
You should choose global if you are in Europe, but it's suitable for devices in the US or USA probably, ony feature differences are here between an EEA and Global rom.
Also, if you install pixel experience recovery, you can install the firmware by going into recovery, and do it via sideload. Or, you can try flashing the rom with TWRP (tutorial linked below), but then you won't able to install updates automatically.
One question: Did you checked in OEM unlocking in developer options before flashed PE?
Hope it helps!

Yeah, I did checked the oem unlocking. I think the reason why i failed because my bootloader probably updated and I forgot to check. You need bootloader version 12.5.16.0.RKLMIXM to install the pixel experience. Also thank for help

Greetings!
You can install the rom via adb sideload too. Put on some random recovery (see my tutorial here: https://forum.xda-developers.com/members/gurtnyi.11842195), and start adb sideload.
Then,
adb sideload insert_package_name.zip
Hope it helps! ; D
Click to expand...
Click to collapse
Can I do that on newer firmware or should I roll back to version 12.5.16.0.RKLMIXM? And if I roll back then I need to unlock device again?

I think you can. I've flashed it successfully on the latest version too. Currently I don't use PE but it was good for me.
Well, regarding to the unlock, it's not a big deal, you don't have to wait 168h again, once you've firstly unlocked your device, you can re-unlock it again, and again, no matter how many times, you don't have to wait a lot again.
But depending on how you rollback it,
I mean, with xiaomi flasher (i think that's its name) you can choose between clean all and lock, save userdata, and clean all, but in the first case, it'll lock back the bootloader. With SP flash tool (if you need, I can provide a link for the modified version of it, that doesn't require an auth file, but if fails, you need a python script, I can link that too), as I remember it won't lock back the device, but I'm not a 100% sure
Hope it helps!

Can you repair link to totorial https://forum.xda-developers.com/members/gurtnyi.11842195 doesn't seem to work.

raven17a said:
Can you repair link to totorial https://forum.xda-developers.com/members/gurtnyi.11842195 doesn't seem to work.
Click to expand...
Click to collapse
Corrected, thank you!

Thank you! I managed to install PE by rolling back to MIUI 12.5. Sideload unfortunatly not working on stock recovery.

raven17a said:
Thank you! I managed to install PE by rolling back to MIUI 12.5. Sideload unfortunatly not working on stock recovery.
Click to expand...
Click to collapse
Happy to hear that!
By the way, yes, pe recovery is better for sideloading, or eventually any not stock recovery. Also, if you install PE recovery, you can apply updates automatically, and in the future you won't need to flash it manually.