Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Main Highlights
✪ MTP support
✪ Can flash stock os Images
✪ Backup/restore works with any os
✪ Restore your old twrp backup
✪ Optimized and faster
✪ Build On A29 Pre Built Kernel By Realme
✪ Full compatible with color os
ScreenShots
Download Link:
https://mega.nz/#!5gYnjQSB!YhC_ZTHuopwwP50LxTvJ1VOq4zYSfG0LAudWr6gatUA
Code:
Bugs
:GSI Flashing Has Some Issues
:If You Finds Any Other Bug Then Report Me
Credits;
AnuragRai(Developer)
Hamza(Tester)
RK(Tester)
Jatin(Tester)
MKS(RM2p Dev,Always Supported Me)
And Whole Realme Tester Team
XDA:DevDB Information
TWRP[UNOFFICAL]-BETA-BUILD-[12-03-2019], Tool/Utility for the Oppo Realme 1
Contributors
anurag rai, hamza
Version Information
Status: Beta
Current Beta Version: 01
Beta Release Date: 2019-03-12
Created 2019-03-12
Last Updated 2019-03-12
Flashing Guide
Code:
[CENTER]
:adb reboot bootloader
:fastboot flash recovery recoveryname.img
:reboot phone manually ,not from fastboot
:After phone boots up,power off it
:Press Power Button+Volume UP &Down For Approx 20 seconds
:After You Are Inside Of Twrp,do this
:Wipe-Format Data-Yes And reboot manually by power off the device
:And Press Power Button+Volume UP & Down
:Flash Magisk And Reboot [/CENTER]
Caution
Code:
:Never Reboot directly to recovery by adb or fastboot commands as it will cause soft brick,
:always manually reboot
Reserved
Thankyou bro..
Finally we are getting working twrp recovery for rm 1:highfive: keep up the good work mate
anabhi said:
Finally we are getting working twrp recovery for rm 1:highfive: keep up the good work mate
Click to expand...
Click to collapse
Bro can you help me with fixing reboot to recovery issue
anurag rai said:
Flashing Guide
Code:
[CENTER]
:Wipe-Format Data-Yes And reboot manually by power off the device
:And Press Power Button+Volume UP & Down
:Flash Magisk And Reboot [/CENTER]
Caution
Code:
:Never Reboot directly to recovery by adb or fastboot commands as it will cause soft brick,
:always manually reboot
Click to expand...
Click to collapse
After wiping data and turning off. My phone wont boot. I doesnt even show the logo. Please help.
It's Working ! Thanks Alot Mate.:victory:
awesome work bro.. thnks a lot u r too fast..
Why wiping data ? Also if we wipe data then won't it take time to setup the device after that only we could reboot. And I just need to put some some apps into system, I dont want to flash magisk. Can I just boot into recovery once using fastboot boot twrp.img command /
Awesome man!??
svsexodia said:
Why wiping data ? Also if we wipe data then won't it take time to setup the device after that only we could reboot. And I just need to put some some apps into system, I dont want to flash magisk. Can I just boot into recovery once using fastboot boot twrp.img command /
Click to expand...
Click to collapse
Yes you can
manavkush said:
Flashing Guide
Caution
After wiping data and turning off. My phone wont boot. I doesnt even show the logo. Please help.
Click to expand...
Click to collapse
Charge it bro
Realme 1 - Treble Rom
'TREBLE', let's talk about it.
Realme 1 supports treble, we have unlocked bootloader, a working TWRP, and several Treble Roms available, so why haven't anyone tried flashing a Treble Rom yet on Realme 1? Those are the only things we need to flash a Treble Rom on this device right? Am I missing something?
I don't have a backup phone nor do we have official firmware for Realme 1 to recover from soft brick, so I am not willing to risk my device yet. If someone else could do it instead I would appreciate it a lot.
P.S. Someone should start a pinned thread for 'Realme 1 - Treble Roms'
johndoe5 said:
'TREBLE', let's talk about it.
Realme 1 supports treble, we have unlocked bootloader, a working TWRP, and several Treble Roms available, so why haven't anyone tried flashing a Treble Rom yet on Realme 1? Those are the only things we need to flash a Treble Rom on this device right? Am I missing something?
I don't have a backup phone nor do we have official firmware for Realme 1 to recover from soft brick, so I am not willing to risk my device yet. If someone else could do it instead I would appreciate it a lot.
P.S. Someone should start a pinned thread for 'Realme 1 - Treble Roms'
Click to expand...
Click to collapse
I've Flashed Phh's GSI Treble Roms.All Of Em Seems To Work Fine But Volte Is Not Working On Any Of Em So I Had To Switch Back To Stock. I Tested AOSP 9.0,RR 9.0 And Lineage 8.1:silly:
It's_Shawn said:
I've Flashed Phh's GSI Treble Roms.All Of Em Seems To Work Fine But Volte Is Not Working On Any Of Em So I Had To Switch Back To Stock. I Tested AOSP 9.0,RR 9.0 And Lineage 8.1:silly:
Click to expand...
Click to collapse
Which TWRP did you use?
And where can I find the stock firmware?
johndoe5 said:
Which TWRP did you use?
And where can I find the stock firmware?
Click to expand...
Click to collapse
That Time I Didn't Use Any Recovery,I Used Fastboot Commands
Hey I successfully installed TWRP recovery but I didn't flash magisk yet. But even now there is a message in status bar saying "Rooting of your phone has been detected. Tap to fix" and that screen is showing me to install 2.1GB OTA update. Idk what is happening I never faced such thing in any of my earlier phone while twrp flashing . What is this ? Can I install the update ? And why is it showing. Will there be possible bootloops if I install the update or willI I still be having TWRP or stock recovery get flashed. Please answer so i can proceed with my choice.
5s4rnv33r said:
Hey I successfully installed TWRP recovery but I didn't flash magisk yet. But even now there is a message in status bar saying "Rooting of your phone has been detected. Tap to fix" and that screen is showing me to install 2.1GB OTA update. Idk what is happening I never faced such thing in any of my earlier phone while twrp flashing . What is this ? Can I install the update ? And why is it showing. Will there be possible bootloops if I install the update or willI I still be having TWRP or stock recovery get flashed. Please answer so i can proceed with my choice.
Click to expand...
Click to collapse
https://forum.xda-developers.com/re...l-method-root-realme-1-install-t3908030/page3
try the solution written in soham028 's post.
it worked for me and updating os will remove root.
vikas2316 said:
https://forum.xda-developers.com/re...l-method-root-realme-1-install-t3908030/page3
try the solution written in soham028 's post.
it worked for me and updating os will remove root.
Click to expand...
Click to collapse
Updating OS will remove root but will it also remove TWRP ???
One more question I followed all the steps correctly (including wiping data) but from TWRP I can't mount DATA.
---------- Post added at 10:01 PM ---------- Previous post was at 09:13 PM ----------
After wiping data if I just reboot to TWRP recovery then I can mount the DATA but once I have started the phone and set it up then again I boot into TWRP recovery and when I try to mount DATA I am not able to do so. Can't mount /data invalid argument. Please suggest something.
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Disclaimer
Code:
/**
* What you do with your device is your choice.
* None of the developers of this software will be held accountable for any damages to your device or to third parties.
* You should know this by now.
**/
What's this?
This is TeamWin Recovery Project for ZUK Z2 Pro (z2_row).
This is an official recovery support thread.
Known Issues
MTP broken in 3.3.0 and newer builds because of a TWRP issue with 4.4 kernel (you can still use adb push and adb sideload)
Requirements
Unlocked bootloader
Common sense and a Z2 Pro
Downloads, changelogs, installation info
All of this info can be found at the official info page.
If you use fastboot to install TWRP, you may have to specify a vendor ID in the commandline, like so:
Code:
fastboot [B]-i 0x2b4c[/B] flash recovery twrp.img
fastboot [B]-i 0x2b4c[/B] reboot
Thanks
@varotone for the initial z2_plus TWRP device tree (and also for the thread template )
@kubersharma for some commits in the device tree
cosmedd for his work on the TWRP tree for z2_row
Frequently Asked Questions
Is this recovery compatible with both treble and non-treble ROMs?
Yes, this recovery is compatible with both non-treble and treble ROMs mounting /factory as vendor (the most updated ones are doing so), while it isn't compatible with the ROMs renaming /factory as /vendor. If the ROM you're using is still using /vendor instead of mounting /factory as vendor, report this to the maintainer and tell them to update.
gg
*Insert some random thx sentence*
I'am using TWRP 3.2.3 since weeks without problems. Is this another version? Why should I use this one?
robert_b said:
I'am using TWRP 3.2.3 since weeks without problems. Is this another version? Why should I use this one?
Click to expand...
Click to collapse
As first because this has the factory mounted as vendor support instead of factory renamed as vendor. If you're already using a build with this support and you downloaded it recently it means that the build is the exact same as this one. I created a thread so that things can get out of Telegram only and also because soon it'll become official (the old one is deprecated pretty much)
Thread updated with the official tag and a new official build on the TWRP.me website. Enjoy
Encryption with latest AEX is not working.
rower19 said:
Encryption with latest AEX is not working.
Click to expand...
Click to collapse
What do you mean with "is not working"? What happens when you try to encrypt?
DD3Boh said:
What do you mean with "is not working"? What happens when you try to encrypt?
Click to expand...
Click to collapse
I have sucessfull encrypted my data partition with aex rom.
But twrp isn't able to decrypt it. Twrp asks for the password but after entering the right pass, i responds with password invalid.
Theres something that was changed in Android encryption (and twrp 3-2-3-1 should it fix for many other devices, here not).
Should not be a big thing.
Perhaps this helps:
review(dot)lineageos(dot)org/q/topic:%22bacon-twrp%22
Thanks for your work!
rower19 said:
I have sucessfull encrypted my data partition with aex rom.
But twrp isn't able to decrypt it. Twrp asks for the password but after entering the right pass, i responds with password invalid.
Theres something that was changed in Android encryption (and twrp 3-2-3-1 should it fix for many other devices, here not).
Should not be a big thing.
Perhaps this helps:
review(dot)lineageos(dot)org/q/topic:%22bacon-twrp%22
Thanks for your work!
Click to expand...
Click to collapse
Hi, sorry for the late answer. Can you pm me on telegram so that we can discuss the issue and I can eventually send you some builds to test? t.me/DD3boh
Thank you!
rower19 said:
I have sucessfull encrypted my data partition with aex rom.
But twrp isn't able to decrypt it. Twrp asks for the password but after entering the right pass, i responds with password invalid.
Theres something that was changed in Android encryption (and twrp 3-2-3-1 should it fix for many other devices, here not).
Should not be a big thing.
Perhaps this helps:
review(dot)lineageos(dot)org/q/topic:%22bacon-twrp%22
Thanks for your work!
Click to expand...
Click to collapse
Checked with @DD3Boh and decryption for pie is working in a test build. He gonna push the new version after some more testing.
But be patient, we will be finally able to encrypt our device and decrypt it in twrp.
Thanks to him,
G0r3t3x
TWRP 3.3.0 just got released
Encryption was fixed, although mtp is broken because of 4.4 kernel (which is a must for encryption)
Instead of mtp you can just use adb push to push files to the internal memory, or either adb sideload <package path> to flash them directly without transferring to the internal storage (works only after having enabled adb sideload in the advanced TWRP tab)
Download link in the first post
Hi, thanks for your work.
I've tried to reinstall baseband but log says it's not installing nothing. Using twrp 3.3.0, i'm on ArrowOS.
A new update has been released! TWRP-3.3.0-1 is present in the website
Changelog:
- Added edl reboot option (download mode)
- Don't wipe data if the command isn't sent by the user
- Sign the build with aosp keys
Go update your recovery
DD3Boh said:
A new update has been released! TWRP-3.3.0-1 is present in the website
Changelog:
- Added edl reboot option (download mode)
- Don't wipe data if the command isn't sent by the user
- Sign the build with aosp keys
Go update your recovery
Click to expand...
Click to collapse
Perfectooo :good:
..btw: what about MTP? ..it works now?
satmaster said:
Perfectooo :good:
..btw: what about MTP? ..it works now?
Click to expand...
Click to collapse
It doesn't work on official builds for some reasons, so I had to disable it
I could though make a build locally where for some reasons it should work fine
I need some help with the Zuk Z2 Pro. I've flashed TWRP 3.3.0.1 and it seemed to work.
However, I'm unable to get the phone detected on my pc in TWRP, or ADB sideload. The phone gets connected while rebooted in system in Zui. Using zuk2pro driver.
I've also not able to mount data.
So i followed some instructions and reformat the partitions, but i forgot the phone could not be detected in TWRP.
I'll like to know if ROMs can be flashed using OTG-USB.
lunloon said:
I need some help with the Zuk Z2 Pro. I've flashed TWRP 3.3.0.1 and it seemed to work.
However, I'm unable to get the phone detected on my pc in TWRP, or ADB sideload. The phone gets connected while rebooted in system in Zui. Using zuk2pro driver.
I've also not able to mount data.
So i followed some instructions and reformat the partitions, but i forgot the phone could not be detected in TWRP.
I'll like to know if ROMs can be flashed using OTG-USB.
Click to expand...
Click to collapse
I tried USB-OTG and it worked. Thankfully.
Can't make any sense out of the driver game.
Sideload isnt working for me either, same as with the previous version, rendering TWRP essentially unusable when running a 4.4 kernel.
Resolve that first please, prior to adding more features. There arent THAT many kernels to choose from.
Dolour said:
Sideload isnt working for me either, same as with the previous version, rendering TWRP essentially unusable when running a 4.4 kernel.
Resolve that first please, prior to adding more features. There arent THAT many kernels to choose from.
Click to expand...
Click to collapse
Probably you don't know why I even switched to 4.4 kernel, which is because 3.18 kernel in TWRP breaks decryption, which is quite an important thing.
Anyway I can build TWRP locally and send a build as that will somehow have mtp and USB in general working.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. It's a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Features:
All function in a normal TWRP
Multi-language support
Supports MTP
Support decrypt /data!
Install guide:
1. Install fastboot tools from google's sdk on your PC
2. Enter fastboot mode
3. Unlock your bootloader
4. Run "fastboot flash recovery recovery.img" in command line
5. Reboot and enjoy it
Download:
https://drive.google.com/uc?id=1rp_cgVuk6fsRybN0wDoOTbt_Pc-vOiHx&export=download
Source code:
https://github.com/omnirom/android_bootable_recovery
https://github.com/thelazyindian/android_device_xiaomi_lavender-twrp
Note:
Due to a bug in android pie, the recovery may ask for pattern if you have set PIN/password for encryption (and vice-versa). Unfortunately, to fix this you need to format your data partition and ask the developer of ROM to include this commit.
When you flash twrp for the first time in MIUI you need to goto Wipe > Format Data otherwise you won't be able to boot to system as it will ask for password.
GAPPS FIX: In TWRP, goto Mount > system_root and try reflashing.
FAQ:
How is it different from other TWRPs available for lavender ?
This build uses standalone decryption which is better than the recoveries using vold decrypt as vold decrypt will fail if system ROM is corrupt or wiped
Credits:
Huge thanks to @abhishek987 and @vasishath for helping
@tufadorin @faraz shafi (For testing)
Reserved
Work fine with encryption
This is working with Global Variant ? greatz ...
It works well. Just one detail. You can not see the clock, because it appears in the same place as the camera.
Thank you for everything.
Just 5 more days left to test this ?
Can you install official miui ota zip after installing twrp and magisk?
Would it brick the device?
Nice built.. I think official build arrives soon
strange behaviour: TWRP is asking for pattern decryption when PIN is used and vice versa.
Decryption via command line works fine.
vkmcondor said:
Can you install official miui ota zip after installing twrp and magisk?
Would it brick the device?
Click to expand...
Click to collapse
It won't brick the device, but no you can't install them.
The update will just fail and reboot you back into MIUI. Everything working as usual.
If you want TWRP/Magisk installed and get updates then you'll have to manually download the 'Recovery ROM' to the update you want to update to. Then flash it in TWRP like you would a custom ROM.
You'll want to reinstall Magisk after you flash the Recovery ROM to get root back.
TWRP remains intact
Enddo said:
It won't brick the device, but no you can't install them.
The update will just fail and reboot you back into MIUI. Everything working as usual.
If you want TWRP/Magisk installed and get updates then you'll have to manually download the 'Recovery ROM' to the update you want to update to. Then flash it in TWRP like you would a custom ROM.
You'll want to reinstall Magisk after you flash the Recovery ROM to get root back.
TWRP remains intact
Click to expand...
Click to collapse
Do I need to format or wipe data?
great work, just need a few days to unlock my bootloader and try this one
Diniodoc said:
strange behaviour: TWRP is asking for pattern decryption when PIN is used and vice versa.
Decryption via command line works fine.
Click to expand...
Click to collapse
same happend to me.can you explain how you fixed it via commandline ? i have to wipe phone and flashed successfully Xiaomi.eu rom . i have global device.
also i flashed now Magisk 19.0 .and it works.
much thx for your work admin ?
majo3000 said:
same happend to me.can you explain how you fixed it via commandline ? i have to wipe phone and flashed successfully Xiaomi.eu rom . i have global device.
also i flashed now Magisk 19.0 .and it works.
much thx for your work admin ?
Click to expand...
Click to collapse
I did not fix it, but you can decrypt your /data via terminal in TWRP : "twrp decrypt PIN"
But I didn't understand you, are you still facing that problem or did you solved it by reflashing MIUI?
Diniodoc said:
strange behaviour: TWRP is asking for pattern decryption when PIN is used and vice versa.
Decryption via command line works fine.
Click to expand...
Click to collapse
Due to a bug in android pie, the recovery may ask for pattern if you have set PIN/password for encryption (and vice-versa). Unfortunately, to fix this you need to format your data partition and ask the developer of ROM to include this commit.
Updated in OP
vkmcondor said:
Do I need to format or wipe data?
Click to expand...
Click to collapse
Not if you're just manually updating by flashing the Recovery ROM. Think of it as a dirty flash a custom ROM. Just install it on top of your current build and then flash your Magisk ZIP and any other mods that may have been overwritten (due to needing to patch the boot.img
Diniodoc said:
I did not fix it, but you can decrypt your /data via terminal in TWRP : "twrp decrypt PIN"
But I didn't understand you, are you still facing that problem or did you solved it by reflashing MIUI?
Click to expand...
Click to collapse
i was first on original rom.then i flashed TWRP from here.after reboot i hang on screen were i have to enter password to access android.so i never have set a password and tryed mi Pin and miui Account password...but none pin was acceptet.
then i wiped data ...reboot ...but android doesnt load.
so i flashed xuaomi.eu Rom . after flashing it .the phone startet succesfully....
the thing is.... i never entered a pin or password to dercrypt my device....and what helped was wipe and flash rom .... greatz..
I am getting error 64 when flashing arm64 gapps.
ebautista said:
I am getting error 64 when flashing arm64 gapps.
Click to expand...
Click to collapse
Why did you even flash gapps?
thelazyindian said:
Due to a bug in android pie, the recovery may ask for pattern if you have set PIN/password for encryption (and vice-versa). Unfortunately, to fix this you need to format your data partition and ask the developer of ROM to include this commit.
Updated in OP
Click to expand...
Click to collapse
Good to know THX. I'm still using original MIUI so I think there is nothing to do than waiting or better use a custom ROM
One more question. Does anybody know if there is the possibility to use a separate password for encryption different from the lock screen? This was possible in earlier versions of Android.
Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
Code:
#include <std_disclaimer.h>
/*
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
Features:
- Decryption works
- Otg works
- Backups works
- Flash Rom works
- Sdcard works
Download:
TWRP
To Flash the TWRP:
Code:
fastboot flash recovery twrp-RMX1971-20191017.img
Then reboot in TWRP manually.
Source code:
https://github.com/omnirom/android_bootable_recovery
https://github.com/thesprintster/device_realme_RMX1971/commits/android-9.0
Precompiled Stock Kernel in use
Credits:
Thanks to other testers for the tests and the support
Created 2019-10-17
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
XDA:DevDB Information
[RECOVERY][3.3.1-14][RMX1971]Unofficial TWRP for Realme 5 Pro (Stable), Tool/Utility for the Realme 5 Pro
Contributors
thesprintster, mauronofrio
Source Code: https://github.com/thesprintster/device_realme_RMX1971/commits/android-9.0
Version Information
Status: Stable
Created 2019-10-17
Last Updated 2019-10-17
Reserved
Why is there 3.3.1-9 in the download and 3.3.1-14 in the title? Did you share accidentally an older version or mistake in title?
greenys' said:
Why is there 3.3.1-9 in the download and 3.3.1-14 in the title? Did you share accidentally an older version or mistake in title?
Click to expand...
Click to collapse
mistake in title
thesprintster said:
mistake in title
Click to expand...
Click to collapse
Ah, I see. Thank you.
Edit.: You accidentally edited the title wrong. Noe it's 3.3.1-19 instead of 3.3.1-9.
Thanks dev for recovery. My phone has been trapped in bootloop after flashing magisk 20.0 . I have twrp back-up in my sd card and I'm restoring backup again. I was flashing to install titanium plus and vanced YouTube
Amot00 said:
Thanks dev for recovery. My phone has been trapped in bootloop after flashing magisk 20.0 . I have twrp back-up in my sd card and I'm restoring backup again. I was flashing to install titanium plus and vanced YouTube
Click to expand...
Click to collapse
How did you flash magisk? I mean first you gotta unlock bootloader. Did you successfully use in-depth test.
will try it soon..
On screen shot its lineage os.. ?
How to unlock the bootloader on Realme 5 Pro?
I mean there's no any tutorial to unlock it yet.. I found some tutorials on google but it doesn't look trusted..
Mustn't we unlock it first then eventually can install twrp ?
jijoejoe123 said:
will try it soon..
On screen shot its lineage os.. ?
Click to expand...
Click to collapse
Yes! I definitely need it!
New build guyz, fixed external sd card mounting. Link in 1st post.
Aizenmas said:
How to unlock the bootloader on Realme 5 Pro?
I mean there's no any tutorial to unlock it yet.. I found some tutorials on google but it doesn't look trusted..
Mustn't we unlock it first then eventually can install twrp ?
Click to expand...
Click to collapse
Go through : https://www.youtube.com/watch?v=FyEEmaaQZh8
Finally , a good news
Failed backup system image (size 5GB).. how to do?
thesprintster said:
New build guyz, fixed external sd card mounting. Link in 1st post.
View attachment 4847759
Click to expand...
Click to collapse
After bootloader unlock and following instructions it says failed to mount system_root and can't flash anything. Especially not lineage os, opengapps and magisk.
greenys' said:
After bootloader unlock and following instructions it says failed to mount system_root and can't flash anything. Especially not lineage os, opengapps and magisk.
Click to expand...
Click to collapse
Yes, this twrp is junk
i can not flash rom lg16 or stock rom ( stock rom convert opzip to zip) ,devices bug mount system_root
I got bootloop after install Rom Lineage, how to fix it?
29y6145 said:
Yes, this twrp is junk
i can not flash rom lg16 or stock rom ( stock rom convert opzip to zip) ,devices bug mount system_root
Click to expand...
Click to collapse
-----------------------------
TWRP flashing and LenageOS installation REALME 5 pro/Q
1)make sure that your bootloader is unlocked.
you can vist this link https://c.realme.com/in/post-details/1184734239149522944 OR
this youtube video
for referance
2)after you have a unlocked bootloader, download the neccessory files required in your PC
===>platform tools (fastboot files) link: https://dl.google.com/android/repository/platform-tools-latest-windows.zip
===>TWRP recovery img . link: https://drive.google.com/drive/folders/1_pRUK4bj74N6xErkpFLr--2GoKyGxUtl
===> vbmeta img . link: https://drive.google.com/file/d/1kq9rV3eF8rYAUwmUvXo-8vttYIhVcQCb/view
===>Leneage OS for realme 5 pro . link:https://drive.google.com/drive/folders/1wa4bllIa6WgH1STAszdxC_xkBTEHDSiT
3) once you have all the files
flash the vbmeta.img with fastboot..
COMMAND : fastboot flash vbmeta vbmeta.img
4) after that flash the recovery
COMMAND: fastboot flash recovery twrp-RMX1971-20191018.img
5) after that reboot into recovery by pressing the volume button on your phone and see " reboot recovery" in a red font
and press power button when u see that.
--.OPTIANAL AND RISKY step {IF YOU WANT TO BOOT INTO COLOROS AFTER INSTALLING TWRP, FLASH THE TWRP RECOVERY IMG AS BOOT ,i dont know this work in new twrp.but worked for me(fastboot flash boot twrp-RMX1971-20191018.img )}
6)after u successfully get the twrp menu make a backup of your whole system(all partitions) in case something goes wrong and move the backup into a lap or memory card
7)install the LenageOS and gapps . and reboot into fastboot mode and do step 3 again but this time flash vbmeta.img from this link:https://drive.google.com/drive/folders/1wa4bllIa6WgH1STAszdxC_xkBTEHDSiT
8) wipe the whole data partition
9) reboot normally.
IN CASE YOU ARE STUCK IN THE RECOVERY MODE OR FASTBOOT MODE FEEL FREE TO CONTACT ME @azharsalim135
---------- Post added at 05:22 PM ---------- Previous post was at 05:21 PM ----------
DnZX said:
I got bootloop after install Rom Lineage, how to fix it?
Click to expand...
Click to collapse
For non indian version Need seperate twrp to flash lineage.. It will be available soon. Dev working on it
working instal magisk in stock rom?
puturaya20 said:
working instal magisk in stock rom?
Click to expand...
Click to collapse
Dont try to install in stock rom.. I heard ita giving problems.. Backup stock before trying..
Disclaimer
Builds are provided AS-IS without warranty or repair. I am not responsible if you brick your device.
About
I was using the existing TWRP build that's been floating around and noticed it had a few issues, so I made a device repo and rebuilt an improved version.
Noteworthy features:
English language defaults
Added support for microSD
Added support for USB storage mounts
Added support for userdata encryption
Support for MTP and ADB
Added backup options for DTBO, verity meta, OEM partitions
Screenshots
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Downloads
Downloads are available at https://github.com/shinyquagsire23/twrp_sony_pdx203/releases/
Flashing
Flashing is only supported on phones which have an unlocked recovery and verified booting disabled!
Code:
#!/bin/bash
# Reboot to fastboot
sudo adb reboot bootloader
# Flash recovery img
sudo fastboot flash recovery recovery.img
# Reboot to recovery
sudo fastboot reboot recovery
Source Code
Source code is uploaded at https://github.com/shinyquagsire23/twrp_sony_pdx203/. I also provided some brief compilation instructions in the README.md for anyone interested.
Special Thanks
Thanks to Sjll for twrp_sony_pdx201, which I based my repository on.
Thank you, I will be testing this weekend.
Very cool, thanks for sharing.
You my friend are a life saver. I installed a magisk module (riru sui) that bootlooped my device. Tried every damn near every option to remove that module...couldn't gain access via ADB as my device was coming up as "unauthorized". I fastboot flashed your twrp successfully....got into file manager and manually removed the module..and my phone booted back up. THANK YOU!
Junior-J said:
You my friend are a life saver. I installed a magisk module (riru sui) that bootlooped my device. Tried every damn near every option to remove that module...couldn't gain access via ADB as my device was coming up as "unauthorized". I fastboot flashed your twrp successfully....got into file manager and manually removed the module..and my phone booted back up. THANK YOU!
Click to expand...
Click to collapse
thats why older Samsung phone running android 7 and lower are considered the safest. they have a inbuilt download mode to recover their software incase of a bootloop. but xperia phones aren't the hardest to root either since they are one of the most used. only problem is that some xperia phones will have their recovery menu and commands etc in chinese/japanese depending where you bought them.
Thanks for sharing，Great Works ~!
Does this not support decryption? I wasn't able to get in with my password using this version of TWRP, but I was with OrangeFox.
Can you give me build.prop from Sony xperia 1 ii Please? give me in my mail or telegram : t.me/Info_Shakib [email protected]
Seems there is a fix for fastbootd @ https://gerrit.twrp.me/c/android_bootable_recovery/+/2910
If I have time next week I'll try patch and make PR shinyquagsire23 unless someone does it first..
Can someone tell me how can to compile twrp recovery for xperia 1(j9110). I need some guidance. Thanks.
TWRP flashed on xq-at51 android 11 without any issue, thank you for the guide
Is it work for experia 1 iii ???
recovery not booting up after flashing stock android 12 january patch, the screen keeps getting splashed with the logo of twrp
Ask, Pixel Experience Plus 12.1 v413 is only img after decompression, can only use TWRP to flash the machine, 1ii 12 has no TWRP available, whether to downgrade 11, use TWRP to flash .img, which partition to flash into TWRP, still trying to learn, Please enlighten me.
Thanks so much. Exceptional.
Works on XQ-AT51 (Europe, dual SIM) . Flashed twice to _a and _b. on Android 11.
I'm having the same problem, whenever i boot into recovery, TWRP logo just keeps flashing, like it's crashing , android 12 btw, any other possibilities to root the 1ii? thanks for the help
marcvie said:
I'm having the same problem, whenever i boot into recovery, TWRP logo just keeps flashing, like it's crashing , android 12 btw, any other possibilities to root the 1ii? thanks for the help
Click to expand...
Click to collapse
To my knowledge, you don't need TWRP to get ROOT. This guide should help: https://forum.xda-developers.com/t/...re-and-gsi-rom-flashing-without-twrp.4119493/
Gunseng said:
To my knowledge, you don't need TWRP to get ROOT. This guide should help: https://forum.xda-developers.com/t/...re-and-gsi-rom-flashing-without-twrp.4119493/
Click to expand...
Click to collapse
Thanks for the reply, that will be handy for flashing, but i eventually got my 1ii rooted using this guide: https://www.getdroidtips.com/unlock-bootloader-root-sony-xperia-1-ii/
If u r on Android 12, just use recovery of this thread:
[ROM][Officiall][pdx203][12.1] LineageOS 19.1
LineageOS is a free, community built, aftermarket firmware distribution of Android 11, which is designed to increase performance and reliability over stock Android for your device. LineageOS is based on the Android Open Source Project with extra...
forum.xda-developers.com
Not twrp but almost the same (lineage).
Flash recovery, then "fastboot reboot recovery"
And this is really working on a rooted stock rom ?
Hello,
as I mentioned in the title, you can now download the official TWRP for the official website, and the most recent version supports encryption/decryption.
https://twrp.me/oneplus/oneplus7pro.html
Does it support 13? I'm running pixel experience.
fli2008 said:
Does it support 13? I'm running pixel experience.
Click to expand...
Click to collapse
they said A12 try it on A13 and see
I can't any more unlock the bl since A12. :/
khalisz said:
I can't any more unlock the bl since A12. :/
Click to expand...
Click to collapse
Yeah thats true, always unlocked it on A11 before flashing A12
yassine2217 said:
Hello,
as I mentioned in the title, you can now download the official TWRP for the official website, and the most recent version supports encryption/decryption.
https://twrp.me/oneplus/oneplus7pro.html
Click to expand...
Click to collapse
Did you manage to run this recovery on OOS A12? As experience shows, this version only works with OOS A11, on A12 I and many people get the "fastboot mod" logo in the center of the screen, without running TWRP.
By the way, here is the official theme of the TWRP developer on guacamole, on xda:
[RECOVERY] [12] [OFFICIAL] TeamWin Recovery Project
Introduction: Team Win Recovery Project or TWRP for short, is a custom recovery built with ease of use and customization in mind. We started from the ground up by taking AOSP recovery and loading it with the standard recovery options, then added...
forum.xda-developers.com
He has a chat in Telegram, his unofficial recovery is published there.
Rein0ud said:
Did you manage to run this recovery on OOS A12? As experience shows, this version only works with OOS A11, on A12 I and many people get the "fastboot mod" logo in the center of the screen, without running TWRP.
By the way, here is the official theme of the TWRP developer on guacamole, on xda:
[RECOVERY] [12] [OFFICIAL] TeamWin Recovery Project
Introduction: Team Win Recovery Project or TWRP for short, is a custom recovery built with ease of use and customization in mind. We started from the ground up by taking AOSP recovery and loading it with the standard recovery options, then added...
forum.xda-developers.com
He has a chat in Telegram, his unofficial recovery is published there.
Click to expand...
Click to collapse
I test it on my phone with elixir A12 work perfetcly and i made a nandroid also with no issue
yassine2217 said:
I test it on my phone with elixir A12 work perfetcly and i made a nandroid also with no issue
Click to expand...
Click to collapse
Yes, I know about support for custom ROMs, but they use FBEv2, OOS uses FEv1, as far as I can understand. Therefore, I am collecting information about the operation of TWRP 3.7 with OOS on A12 (because this version is declared to support OOS A12, but only works on OOS A11)
Thank you for your answer!
Rein0ud said:
Yes, I know about support for custom ROMs, but they use FBEv2, OOS uses FEv1, as far as I can understand. Therefore, I am collecting information about the operation of TWRP 3.7 with OOS on A12 (because this version is declared to support OOS A12, but only works on OOS A11)
Thank you for your answer!
Click to expand...
Click to collapse
I confirm that too, it works under OOS11 but not with OOS12, all on OnePlus 7Pro.
I'm on OOS12 stable. Installing it somehow managed to get my magisk looping in some "downloading the full magisk package"-mode. Didn't mind as I thought I might just flash it via TWRP later on. Unfortunately I don't even get that far.
Just to clarify - I tried "fastboot boot" the following items:
- a magisk patched boot.img extracted from the OOS12 stock image
- TWRP 3.6.2 (V1) unofficial by Nebrassy
- TWRP 3.7.0 V1 Official
All ways lead me to a "fastboot mode" logo.
Am I missing something here?
RfBob said:
I'm on OOS12 stable. Installing it somehow managed to get my magisk looping in some "downloading the full magisk package"-mode. Didn't mind as I thought I might just flash it via TWRP later on. Unfortunately I don't even get that far.
Just to clarify - I tried "fastboot boot" the following items:
- a magisk patched boot.img extracted from the OOS12 stock image
- TWRP 3.6.2 (V1) unofficial by Nebrassy
- TWRP 3.7.0 V1 Official
All ways lead me to a "fastboot mode" logo.
Am I missing something here?
Click to expand...
Click to collapse
As I wrote earlier, TWRP 3.7 and less cannot run on A12.
After flashed a modified boot, what happens to your phone? Bootloop ?
ADB tells me it sent and wrote boot partition via command "fastboot flash boot [...]". After that nothing happens.
Forced it to reboot afterwards and I am back to my UNpatched boot partition.
I patched the image with magisk manager on the device itself then transfered it back to my PC. I just transferred it to the phone again to verify, if it is actually patched. Magisk tells me it is.
RfBob said:
ADB tells me it sent and wrote boot partition via command "fastboot flash boot [...]". After that nothing happens.
Forced it to reboot afterwards and I am back to my UNpatched boot partition.
I patched the image with magisk manager on the device itself then transfered it back to my PC. I just transferred it to the phone again to verify, if it is actually patched. Magisk tells me it is.
Click to expand...
Click to collapse
If fastboot take a message "Finished. Total time: ..." and sending/writing have status OKAY, then new mod_boot.img flashing sucsessful. I don't quite understand what you get when you try to start the system after flashing ...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
When restarting after flashing the patched boot image I am back to my unrooted state. Everything else is working. No bootloop or else. Just no root either.
RfBob said:
View attachment 5750285
When restarting after flashing the patched boot image I am back to my unrooted state. Everything else is working. No bootloop or else. Just no root either.
Click to expand...
Click to collapse
I can try to share patched_boot, which firmware version is on your device?
Rein0ud said:
I can try to share patched_boot, which firmware version is on your device?
Click to expand...
Click to collapse
Sure, please. Firmware - GM1913_11_H.30
RfBob said:
Sure, please. Firmware - GM1913_11_H.30
Click to expand...
Click to collapse
Pathed boot from H30
Phone booted up just fine with your patched image (just as with mine). Thanks mate, but still no root.
RfBob said:
Phone booted up just fine with your patched image (just as with mine). Thanks mate, but still no root.
Click to expand...
Click to collapse
Hmm, then you should try the method with getting root on OOS 11, local update via zip to 12 and then Magisk firmware in both slots, then reboot
This is exactly where I came from. Updating local caused magisk to redownload some additional files in a loop. So I had to reinstall magisk. Since then - although no reboot in between - I'm unable to get it rooted. Even booting the patched images tells me "no root".