I have a Verizon S8 that I flashed with the XAC firmware and so I'm at XAA/VZW/VZW after enabling all bands. However, even though the entire bay area should be blanketed under band 12, I have not once connected to band 12. I'm always on band 4. Has anyone with a original Tmo S8 ever connected to band 12 in the SF bay area? You can check using LTE Discovery or SignalCheck apps from the Play store. The whole reason for me to go through the trouble of flashing the non-VZW firmware was to ensure I would be able to access band 12 but doesn't seem like that worked.
I'm sitting at home on my T-Mo S8 in the SF Bay Area and I'm on Band 4. I'll check at work tomorrow morning and let you know.
If you don't have connectivity issues, it shouldn't go to band 12. As band 12 is a lower frequency and cannot carry as much bandwidth. From what I've researched previously, the phone will only take a band 12 signal if there are no other bands with a stable signal in the area as tmobile got it for the sole purpose of distance and wall penetration achieved at 700mhz to say they have a larger LTE coverage map.
. Also this from experience as my house only gets band 2 outside and when I come inside it switches to band 12. And with the lte booster connected, it uses the outside band 2.
Unless you are saying that your phone goes to no service instead of to band 12, then i have no answer
Dail *#0011# in your phone to see if band 12 is being aggregated with band 4.
If you want to see if band 12 works you could dial *#2263# and select only band 12 to work.
esjames said:
Dail *#0011# in your phone to see if band 12 is being aggregated with band 4.
If you want to see if band 12 works you could dial *#2263# and select only band 12 to work.
Click to expand...
Click to collapse
after we select band 12 only or any other band of our choices, how do u apply the new setting ? i click on back and entered 0011 and noticed im still on band 4 ? then i went back to 2263 and noticed all the lte band are still selected with *
oohoy said:
after we select band 12 only or any other band of our choices, how do u apply the new setting ? i click on back and entered 0011 and noticed im still on band 4 ? then i went back to 2263 and noticed all the lte band are still selected with *
Click to expand...
Click to collapse
You have to select "Apply band configuration" after you selected the ones you want or they wont take effect.
esjames said:
You have to select "Apply band configuration" after you selected the ones you want or they wont take effect.
Click to expand...
Click to collapse
got cha. gotta hit back to previous screen where i previous selected lte band, but press option 7 to apply setting. lol. still new at this but it works. although band 12 is just as slow as band 4 at home. i get faster speed with band 2, however, lte discover still shows band 4 even though im actually on band 2.
tks again
oohoy said:
got cha. gotta hit back to previous screen where i previous selected lte band, but press option 7 to apply setting. lol. still new at this but it works. although band 12 is just as slow as band 4 at home. i get faster speed with band 2, however, lte discover still shows band 4 even though im actually on band 2.
tks again
Click to expand...
Click to collapse
No prob!
I used LTE discovery before and it always told me i was on band 4 when it wasn't in my area, only 2/12.
esjames said:
No prob!
I used LTE discovery before and it always told me i was on band 4 when it wasn't in my area, only 2/12.
Click to expand...
Click to collapse
never got to try the service modes since i been using verizon brand phones on tmobile , lol. it makes so much sense to use tmobile brand samsung phone on tmobile network.
anyway now i can wait patiently on the root. no need to get network signal guru now to change lte bands since that app requires root
Thanks all. I bought the Verizon version cuz it's unlocked and it was the cheapest at Best buy. Plus it would be a hand me down for my bro who's on Verizon service when I upgrade lol I always thought band 12 was the godsend for Tmo. I did not know it was just a fall back band. I did notice today at work I was occasionally connected to band 12 but would almost immediately reconnect to 4 whenever I checked. Either signalcheck app was wrong or it really only uses 12 for a back up if nothing else is available.
Hi I am an user of a Nokia 7 Plus TA-1062 wich in the documentation says it supports Band 3 LTE (1800) https://www.phonemore.com/nokia-7-plus-4gb-ram/specs/3918.
Today I puted a Movistar SIM card wich in my country supports the Band 3 LTE, but my Nokia only gets 3G.
I don´t know if I have to enable something or whats is happening?
Can anyone helpme?
Hey guys,
xda still going strong. nice to see.
need some help though.
i bought a note 8(yes in 2020) for some reason(side device) and i got stuck with a problem right away.
i noticed that TDD LTE bands(band 34,38,39,40,41) are all missing from my device.
i am having an exynos varient (n950f)
i was monitoring my network from past 2 days and 3ca was working fine. i was connected to 3,5 and band 40 all together.
i wanted better reception so went in network selection mode and selected band 5 preffered. i dialed *#0011# to check my ca status and i was still transmitting on all 3 bands with speeds well over 100mbps.
after some time my speeds died and i no longer see band 40 in *#0011# menu and i have tried restarting device and what not but still cant connect to band 40.
i am pretty sure TDD LTE bands including band 40 was missing from band selection menu earlier too but things were just fine. not i am stuck with a expensive device that fails badly.
please help.
on some inspection i observed that my phones is continously doing 2ca even when using no major data on band 3 and 5.
basic is stuck on band 3 and s1 on band 5. me changing to whatever setting in band selection in hiddennetworksetting dont affect it.
tried selecting bands that my operator dont even support. not in preffered mode but as the only hard selection. makes no diffrence. network signals shuts for a second and i am back on band 3 and 5 combo
I saw with the Samsung S20 and S10 phones there is a non-root method to selecting your preferred available band on LTE, etc.
Is there a way to do that with the Rog2?
I have a situation where after a reboot or airplane mode off and 4G comes back on, my Rog2 will select the faster LTE Band 3 in my area, but then after a few minutes, drops to the slower LTE Band 1 and then never goes back to Band 3. The speed difference is considerable - basically double speed on Band 3..
Anyways, I'm guessing there isnt a way to do it, but keen to know if anyone has any tricks :good:
Hi guys,
I have rooted my note 8 with deluxe ROM to access hidden network setting option to lock specific band of network. As we know that, Hidden network setting option is disabled by Samsung but, I rooted my device and download apk of hidden network setting and placed in system with help of root explorer. Everything went perfect. Now, I can access section where i can select specific band and lock it. I access it with Shortcut Master Lite. But, When i tick on specific band and toggle the selection button then it shows message success. Immediately my network change to my selected band. I can check from *#0011#. But, if my phone remain in stable state for few seconds then it automatically switch to another band. Which mean it didn't lock to specific Band. When i go back to hidden network setting, there is no tick on my selected BAND but toggle but still says that i am on selected band option instead of LTE ALL. I am using India Jio Sim card which support Band 3, 5 and 40. I get very good internet speed on 3 and 5. But, It automatically switch to Band 40 when its remain in stable state.
I want to lock it to Specific band only. Can you help regarding it. I am using deluxe ROM with Android 9.
Thanks
inder
Hello, were you able to fix this problem ?
Am going through the same atm
I'm facing the same issue on my N950F. Don't understand why samsung locked this on the Note 8, most new phones allow this setting. Any way to work around this with root ??
Edit: this is what worked for me https://forum.xda-developers.com/t/how-to-lock-lte-band.3681480/#post-74325453
TL;DR: Get org.vndnguyen.phoneinfo (no longer available on the play store), and run ServiceMode as root. Follow the guide above to disable unwanted LTE bands. Finally a solution that works for devices which Samsung disabled the "Band Selection" menu method (blue background issue).