Related
I just started using Tasker on my Droid X running Liberty GB and am loving it. Last night I installed tasker on my gtab running CalkClem V6 and was wondering if anyone has any gtab/tablet specific profiles or tips?
So far I have only used Tasker on the gtab to automatically turn off the screen when the case closes. The profile activates when the light sensor is at zero. The corresponding actions are wait 4 seconds and then lock device. I'm betting I will have trouble with this profile when using the gtab in a very dark room, so I might have to restrict this profile to only daylight hours.
I'm also considering using tasker to shut down the gtab automatically every night at around 2AM just in case I left it running and it's not plugged in.
Anyone doing anything interesting with tasker and the gtab?
brettdwagner said:
I just started using Tasker on my Droid X running Liberty GB and am loving it. Last night I installed tasker on my gtab running CalkClem V6 and was wondering if anyone has any gtab/tablet specific profiles or tips?
So far I have only used Tasker on the gtab to automatically turn off the screen when the case closes. The profile activates when the light sensor is at zero. The corresponding actions are wait 4 seconds and then lock device. I'm betting I will have trouble with this profile when using the gtab in a very dark room, so I might have to restrict this profile to only daylight hours.
I'm also considering using tasker to shut down the gtab automatically every night at around 2AM just in case I left it running and it's not plugged in.
Anyone doing anything interesting with tasker and the gtab?
Click to expand...
Click to collapse
That's actually REALLY useful! I'm going to go find it on the market in a little bit...
Tasker is $6.42 in the marketplace, which seems a bit expensive for an automation app... until you've tried it. The dev's site has a 7 day trial apk if you want to give it a spin. You can backup all profiles from the trial and restore them to the purchased app if you like it.
http://tasker.dinglisch.net/
I just created a profile on my droid x that plays beyondpod and sets the media volume to a specific level every time my Bluetooth headphones are connected.
sorry if I sound like a shill, but it's just so awesome...
Oh, its a paid app.
I like the idea, but not enough to spend that much on it. Maybe if it were a 99 cent app.
I'm almost certain there is a free app to do just the case close screen off portion. I remember seeing it here on the forum a while back.
That would be clutch, as I just got my case today and would love to make that happen!
To the op, could you post instruction on how to do what you did with locking screen when light sensor is zero? I'm struggling. With it.
Tasker isn't the most intuitive tool in the world, so here is how I achieved the case close, screen off profile:
Open tasker
tap "New" to create a new profile and name it anything
tap "State"
tap "Light Level"
set top slider at 0 and set bottom slider between 1 and 4 (higher number will help if your case doesn't block all the light)
tap "Done"
tap "New Task" and name it anything
tap "+"
tap "Tasker"
tap "Wait"
The second slider is seconds. This will determine how long the delay is between when you close your case and when the screen turns off. I selected 4 seconds to avoid accidentally covering the sensor with my finger.
scroll down and tap "done"
tap "+" again
tap "Display"
tap "System Lock"
tap "Done"
Tasker will need to gain a new permission from the OS at this point. Be sure to read the warnings that will pop up.
tap "Done"
tap "Apply" and make sure the "On" check box is selected in the bottom right
That should do it. If this doesn't work you may want to confirm that your light sensor is functioning properly (I've only tested this on CalkClem V6). To do that I downloaded one of the "phone sensor" apps from the marketplace.
Nvm, I'm an idiot.
goodintentions said:
Nvm, I'm an idiot.
Click to expand...
Click to collapse
I prefer "dummy" myself
brettdwagner said:
I prefer "dummy" myself
Click to expand...
Click to collapse
Haha, my original problem was I couldn't find "system lock". But in the back of my mind I was trying to look for "lock system". Only saw "lock" but no "lock system". I was like "wtf?"
Then after going on a rampage through my kitchen, I went back to the gtab and found "system lock".
May be I should get my eyes checked soon. Been a few years since last time.
By the way, thank you for recommending this app for me. I'm waiting for my clip case to arrive. Man, it will be slick. Has tested it a dozen times now. The screen shut off every time.
The thing is too bad the other way around doesn't work. I tried to set up the reverse to turn it on when there's light and the gtab wouldn't turn on.
Any idea how to restrict this to daytime hours? Nevermind. My dumbass found it.
You can restrict it to daylight hours by tapping the left side of the profile and selecting "add." From there you can set the hours in which this profile can be activated.
Just in case any onlookers were interested.
Check out gestures in tasker too. You can do things like mute the tab by rotating it left then right.
http://tasker.dinglisch.net/userguide/en/gestures.html
Hello all,
Was wondering if anyone is having the same issue as I am. My lock screen doesn't seem to actually lock the phone.. i.e. if you press an app without sliding it up, it just opens. The lock icon, however, is still displayed. My lock screen style is set to productivity, and that still all works, and I have no security set up. It's worth noting that it was working with no issues up until a day ago, and nothing has changed :/
For further clarification:
By not working, I mean that before I used to have to slide the tab up, or to launch an app I would have to drag it up, but now that doesn't work.
Here's a video showing what I mean:
http://www.youtube.com/watch?v=bclXBQwqXa0&feature=youtu.be
This just started happening to my AT&T HTC One tonight! I found this post by doing a search to see if anyone else had experienced this same issue on their One.
Also I can no longer drag the icons at the bottom of my lockscreen up to get into that particular app. And pressing anywhere on the lockscreen seems to unlock the phone and take me to the desktop.
I'm using the "music lockscreen" style, fyi.
LuigiC6 said:
Hello all,
Was wondering if anyone is having the same issue as I am. My lock screen doesn't seem to actually lock the phone.. i.e. if you press an app without sliding it up, it just opens. The lock icon, however, is still displayed. My lock screen style is set to productivity, and that still all works, and I have no security set up. It's worth noting that it was working with no issues up until a day ago, and nothing has changed :/
For further clarification:
By not working, I mean that before I used to have to slide the tab up, or to launch an app I would have to drag it up, but now that doesn't work.
Here's a video showing what I mean:
http://www.youtube.com/watch?v=bclXBQwqXa0&feature=youtu.be
Click to expand...
Click to collapse
---------- Post added at 09:07 PM ---------- Previous post was at 08:56 PM ----------
I just figured out what was causing it on mine... I actually received my Pebble smartwatch in the mail today and had installed the Pebble Android app onto my One. This also required going into the Settings on my One and enabling Accessibility for the Pebble and Pebble Notifier and these 2 accessibility settings were what was causing the lockscreen to behave this way.
Don't see anyway to get around it so far...
ranphi said:
This just started happening to my AT&T HTC One tonight! I found this post by doing a search to see if anyone else had experienced this same issue on their One.
Also I can no longer drag the icons at the bottom of my lockscreen up to get into that particular app. And pressing anywhere on the lockscreen seems to unlock the phone and take me to the desktop.
I'm using the "music lockscreen" style, fyi.
---------- Post added at 09:07 PM ---------- Previous post was at 08:56 PM ----------
I just figured out what was causing it on mine... I actually received my Pebble smartwatch in the mail today and had installed the Pebble Android app onto my One. This also required going into the Settings on my One and enabling Accessibility for the Pebble and Pebble Notifier and these 2 accessibility settings were what was causing the lockscreen to behave this way.
Don't see anyway to get around it so far...
Click to expand...
Click to collapse
Wow aha actually I did install the pebble app just before it started happening.. I wonder if it's a problem on pebble's side or htc... good catch though!
Yeah, not sure of that either. I just wondered and posted about this myself in another XDA thread I found on this very same topic:
http://forum.xda-developers.com/showthread.php?p=40598774#post40598774
LuigiC6 said:
Hello all,
Was wondering if anyone is having the same issue as I am. My lock screen doesn't seem to actually lock the phone.. i.e. if you press an app without sliding it up, it just opens. The lock icon, however, is still displayed. My lock screen style is set to productivity, and that still all works, and I have no security set up. It's worth noting that it was working with no issues up until a day ago, and nothing has changed :/
For further clarification:
By not working, I mean that before I used to have to slide the tab up, or to launch an app I would have to drag it up, but now that doesn't work.
Here's a video showing what I mean:
Click to expand...
Click to collapse
I have got this on my HTC one, I have come from an iphone and wanted to have the screen turn on when any emails are received. These show up on the lockscreen so when I'm driving if I get an email the screen turns on.
I can use several apps to do this but they all require to be enabled in Accessibility, if I do that the lockscreen unlocks when its touched anywhere as mentioned earlier without swiping. If I disable the accessibility setting its all back to normal but the app doesnt work....ie. the screen doesn't come on.
Any one figured this out yet?
M.
fibrousman said:
I have got this on my HTC one, I have come from an iphone and wanted to have the screen turn on when any emails are received. These show up on the lockscreen so when I'm driving if I get an email the screen turns on.
I can use several apps to do this but they all require to be enabled in Accessibility, if I do that the lockscreen unlocks when its touched anywhere as mentioned earlier without swiping. If I disable the accessibility setting its all back to normal but the app doesnt work....ie. the screen doesn't come on.
Any one figured this out yet?
M.
Click to expand...
Click to collapse
I found a work around for it. It requires root access, Tasker and Secure Settings.
What I did was create a Context that is activated when the display is on and then using Secure Settings, disable all Accessibility for all events. As an exit task, I re-enable all my accessibility apps.
Now when i turn on my display, I actually have to slide to unlock.
efox29 said:
I found a work around for it. It requires root access, Tasker and Secure Settings.
What I did was create a Context that is activated when the display is on and then using Secure Settings, disable all Accessibility for all events. As an exit task, I re-enable all my accessibility apps.
Now when i turn on my display, I actually have to slide to unlock.
Click to expand...
Click to collapse
Sound interesting, :good:
So I install Tasker and Secure Settings then create Context in Tasker? Hows that done? can you explain it a bit more....thanks
M.
Under the profiles tab
Press the + icon in the botton right corner
Select State
Select Display
Select Display State
Change "Is Off" to "Is On"
Press the back button
You should have a popup of available Tasks (if you have any)
Select New Task +
[Optional] Give it a name
You need to do the following section as many times as you have Acessibility services
***********************************************
Press the + icon in the lower middle screen
Select Plugin
Select Secure Settings
Press the Edit button
Select Accessibility Services
Select a service, and make sure is disabled (by default it will be)
Press the save icon in the lower left
Press back
************************************************************
Repeat the previous section as needed
When you are done creating your task, press the back button
You should be back at your main profile screen.
Long press the green arrow of the task you just created
Select Add Exit Task
Repeat the *********** section but save the accessiblity services as "Is Off" for all your services.
Tasker has a bit of a learning curve, and hopefully this will get you started.
efox29 said:
Under the profiles tab
Press the + icon in the botton right corner
Select State
Select Display
Select Display State
Change "Is Off" to "Is On"
Press the back button
You should have a popup of available Tasks (if you have any)
Select New Task +
[Optional] Give it a name
You need to do the following section as many times as you have Acessibility services
***********************************************
Press the + icon in the lower middle screen
Select Plugin
Select Secure Settings
Press the Edit button
Select Accessibility Services
Select a service, and make sure is disabled (by default it will be)
Press the save icon in the lower left
Press back
************************************************************
Repeat the previous section as needed
When you are done creating your task, press the back button
You should be back at your main profile screen.
Long press the green arrow of the task you just created
Select Add Exit Task
Repeat the *********** section but save the accessiblity services as "Is Off" for all your services.
Tasker has a bit of a learning curve, and hopefully this will get you started.
Click to expand...
Click to collapse
Thanks for the write up its really appreciated. I'll give it a go.....
M.
Efox29. That works very well.. Thanks again for the advice.
I've got this set up as well but for me it is extremely hit and miss. Nearly 50% of the time I still get the single touch unlock and the other half of the time tasker works perfectly. The only thing I can think of is that my pin unlock causes a problem but why only half the time.
Anyone else have this problem?
I suppose I should be happy my problem has been cut in half but I wish it was completely consistent.
Sent from my HTC One using xda-developers app
It's not ideal but works ok, for me it's better than nothing.
M.
Actually having used this tasker solution for a few days now it works about 75% of the time and seems more reliable if the screen has been off for a while vs reactivating the screen very soon after turning off. Still sometimes I get the one touch unlock after the screen being locked for hours. On the whole the accessibility problem still really annoys me but I agree this solution is better than nothing and so far I haven't had any more accidental call answers.
Sent from my HTC One using xda-developers app
has anyone noticed that another issue with this accessibility bug is that the screen will flicker or flash black for a split second after unlocking? again, this only happens after you turn on accessibility for an app.
I can't remember if I've seen this as possible; seen this as a want; or it already exists.
I don't use a lock screen on my phone at all. Sometimes I worry about security, but not enough to deal with a lock screen all the time.
Solution would be that if your phone is out of Bluetooth range of your watch, then you hit a lock screen (with password). If you leave your watch at home or something, then you get to enter your password when you turn on your phone. When you have your watch on, no lock-screen.
This already out there somewhere? Wonder if Tasker could do something like this.
Looking at:
http://forum.xda-developers.com/showthread.php?t=955092 with Bluetooth plugin, but is there something like this in the Gear store somewhere?
This feature is included in Gear Manager. I use it and it works great.
lyall29 said:
This feature is included in Gear Manager. I use it and it works great.
Click to expand...
Click to collapse
I just saw the option, but 1 problem - it seems to force you to use a slide unlock when the gear is in range, and pattern unlock when it is not.
Any way to use *no* lock screen when gear in range?
Not that I know of.
lyall29 said:
Not that I know of.
Click to expand...
Click to collapse
Thanks for the replies. Hmm - additional security vs pain of lock screen.
Question I'll have to go look up - I haven't used a lock screen since I was going crazy in my Widget Locker days. I remember reading a lot about being able to customize the screen a bit and/or add some more basic info - how customizable is tge default lock screen nowadays?
Edit: Nevermind, I just went to lockscreen to turn on 'swipe' and got a page full of stuff that disappears when you select 'none' (which is where I was a minute ago...)
polstein said:
Thanks for the replies. Hmm - additional security vs pain of lock screen.
Question I'll have to go look up - I haven't used a lock screen since I was going crazy in my Widget Locker days. I remember reading a lot about being able to customize the screen a bit and/or add some more basic info - how customizable is tge default lock screen nowadays?
Edit: Nevermind, I just went to lockscreen to turn on 'swipe' and got a page full of stuff that disappears when you select 'none' (which is where I was a minute ago...)
Click to expand...
Click to collapse
Did anyone find a way yet to use a pin rather then pattern lock to use with autounlock? anytime I activate autounlock it prompts for a pattern which is not what I like. I want to use a pin if possible...
Maybe try this app?
https://play.google.com/store/apps/details?id=org.jraf.android.nolock&hl=en
I'm not sure if it only disables the lockscreen when you don't have password on, hopefully there's some settings you can mess around with.
Last night I was in done settings menu and saw anything about notifications and turned it on to see what it would do. Now instead of the usual notificationsthat pop up, I get a thin floating pop up notification instead. I want to switch back and went to they're I thought I did it, but can't find they setting. I've tried searching the phones settings for notification, popup, floating..... but can't find it.
Does anyone know where I need to go?
My goodness I've become that guy that changes a setting then can't undo it! ?
Not sure how you did it but can you post a screen shot of the thin floating notifications? I'm intrigued....
_MetalHead_ said:
Not sure how you did it but can you post a screen shot of the thin floating notifications? I'm intrigued....
Click to expand...
Click to collapse
Hopefully this works. Having do everything from my phone as hurricane Irma has left me with out internet for the last 7 days.
Here is a screenshot of a text I sent myself from my other phone.
Edit: added screenshot of regular notification for comparison.
I just googled that, the setting is under "edge lighting". Just turned it on, I really like it.
_MetalHead_ said:
I just googled that, the setting is under "edge lighting".
Click to expand...
Click to collapse
That's what I thought and where I first went, but didn't find it. I'll look again, maybe I missed it.
Thanks.
Edit: apparently a can't have edge lighting without the "thin floating" notifications. I could of sworn I clicked something to enable it, besides edge lighting.
That sucks I want the edge lighting without the thin floating notification. ?
I did the same thing.... Googled this does hours... Smh
How can I toggle the AOD to be completely off? This is driving me nuts. I'm aware of the settings within the Motion Sense area of settings. The "show when nearby" seems to take, however no matter what I do the clock still appears no matter what as an AOD. I've tried disabling the following in different combinations to no avail:
Motion Sense
com.google.oslo
Pixel Ambient Services
com.google.intelligence.sense
Motion Sense Bridge
com.google.android.apps.motionsense.bridge
Even tried the clock app itself
com.google.android.deskclock
Whenever these are initially disabled it seems to work for a minute or so but then the clock pops back up on the AOD. I just want the toggles to work! This is for when I'm driving and my my phone is mounted where it faces me. I already have 2 clocks in my car and don't need a third it's more of an annoyance than anything else.
Do you have Always On disabled in the Lock Screen settings?
Display>Lock Screen Display>Always on
iBreakStuff said:
How can I toggle the AOD to be completely off? This is driving me nuts. I'm aware of the settings within the Motion Sense area of settings. The "show when nearby" seems to take, however no matter what I do the clock still appears no matter what as an AOD. I've tried disabling the following in different combinations to no avail:
Motion Sense
com.google.oslo
Pixel Ambient Services
com.google.intelligence.sense
Motion Sense Bridge
com.google.android.apps.motionsense.bridge
Even tried the clock app itself
com.google.android.deskclock
Whenever these are initially disabled it seems to work for a minute or so but then the clock pops back up on the AOD. I just want the toggles to work! This is for when I'm driving and my my phone is mounted where it faces me. I already have 2 clocks in my car and don't need a third it's more of an annoyance than anything else.
Click to expand...
Click to collapse
Search for "always on" in settings and turn it off
display / lockscreen / always on - does not exist
Searching for "always on" yields no results.
I don't have a lock screen set as I don't need it, though I did try setting one temporarily to see if the option showed up, but nothing. That's how I used to do it on my note but they moved everything around on 10.
iBreakStuff said:
display / lockscreen / always on - does not exist
Searching for "always on" yields no results.
I don't have a lock screen set as I don't need it, though I did try setting one temporarily to see if the option showed up, but nothing. That's how I used to do it on my note but they moved everything around on 10.
Click to expand...
Click to collapse
You really don't have always on under..settings/display/advanced/lock screen display....then scroll to the bottom??
Display, scroll all the way to the bottom, select lock screen display, bottom third of the screen you'll see Always on, toggle it off. You can still have it light up by tapping, lifting, or triggered by soli, in any combination if you wish.
edit.. Ninja'ed me Badge, it's there, he just missed it.
iBreakStuff said:
display / lockscreen / always on - does not exist
Searching for "always on" yields no results.
I don't have a lock screen set as I don't need it, though I did try setting one temporarily to see if the option showed up, but nothing. That's how I used to do it on my note but they moved everything around on 10.
Click to expand...
Click to collapse
It's probably because you went around disabling apps. Enable the Pixel ambient Services.
Sent from my Pixel 4 XL using Tapatalk
With everything re-enabled and a hard reboot, I set a screen lock. Then went back to display and the "lockscreen" option was now available. I turned off AOD and then disabled the screen lock and it took. No more clock.
It seems as though the AOD toggle being buried in the lock screen options, which is only available when one is on will take no matter of a lock screen is set. So every time I want to change this I have to go through this process. I wish there was a Quick Settings shortcut for this.
iBreakStuff said:
With everything re-enabled and a hard reboot, I set a screen lock. Then went back to display and the "lockscreen" option was now available. I turned off AOD and then disabled the screen lock and it took. No more clock.
It seems as though the AOD toggle being buried in the lock screen options, which is only available when one is on will take no matter of a lock screen is set. So every time I want to change this I have to go through this process. I wish there was a Quick Settings shortcut for this.
Click to expand...
Click to collapse
Well it's not exactly meant to be toggled on and off often like the ones in the Quick Settings pulldown menu. The easiest and quickest way is just searching "Always on" in settings and you can actually toggle it right there as seen in the screenshot.
Sent from my Pixel 4 XL using Tapatalk
Also if you are not using the active edge for anything critical you might try button mapper by flar2 and see if one of the options can be set to it. Or maybe even on of the other options in his app will apply it.
iBreakStuff said:
With everything re-enabled and a hard reboot, I set a screen lock. Then went back to display and the "lockscreen" option was now available. I turned off AOD and then disabled the screen lock and it took. No more clock.
It seems as though the AOD toggle being buried in the lock screen options, which is only available when one is on will take no matter of a lock screen is set. So every time I want to change this I have to go through this process. I wish there was a Quick Settings shortcut for this.
Click to expand...
Click to collapse
I don't now and have never had a lock screen enabled on my phone and can and have always been able to enable or disable always on display. Unless you disabled some app affecting this as mentioned above it should be there for you too just as it is for the rest of us. You may want to look into that and see what's hanging you up.
krabman said:
I don't now and have never had a lock screen enabled on my phone and can and have always been able to enable or disable always on display. Unless you disabled some app affecting this as mentioned above it should be there for you too just as it is for the rest of us. You may want to look into that and see what's hanging you up.
Click to expand...
Click to collapse
I haven't been able to do it since it was virgin out of the box, the option just isn't there. Doing it on my old Note 8 was super easy it was right where it was supposed to be. Although I have found a workaround for anyone on the off chance I'm not the only one experiencing this.
Being rooted, I downloaded ShortcutMaster and used the app explorer and poked around until I found;
[Setup Wizard]
com.google.android.pixel.setupwizard
tap and scroll down to;
com.google.android.pixel.setupwizard.alwaysondisplay.AlwaysOnDisplayOptInActivity
Choosing [launch] triggers the screen from inital setup to toggle the AOD.
Set it as favorite, or Homescreen (on the paid version)
Launch Shortcut master each time to change it or use the homescreen icon shortcut.
The setting seems to take each time I've done it so far.
iBreakStuff said:
I haven't been able to do it since it was virgin out of the box, the option just isn't there.
Click to expand...
Click to collapse
Your username is very appropriate then. [emoji1787] Well at least you have a work around.
Sent from my Pixel 4 XL using Tapatalk
Lockscreen customize
Since we're on the lockscreen topic, is there a way to add the camera icon back on the lock screen?
codevalley said:
Since we're on the lockscreen topic, is there a way to add the camera icon back on the lock screen?
Click to expand...
Click to collapse
Don't think so but you can just double click power to get to camera quickly
Mackay53 said:
Don't think so but you can just double click power to get to camera quickly
Click to expand...
Click to collapse
I know. But I could customize that button to choose 3rd party camera app