Hi everyone, when I install the TWRP using the flashable zip installer and then boot into TWRP it gets stuck in the TWRP logo and when I flash from fastboot it works fine, but I need to install it from flashable zip because I TWRP the I have to start with the partition slot A that also has the custom rom, I can't always change slot partitions every time I have to do operations with the TWRP.
I would also like to note that using the twrp-installer-jasmine_sprout-3.2.3.zip results in the recovery mode sitting on the TWRP logo even if it was a successful install.
I'm hoping someone can find a fix to this soon.
XRed_CubeX said:
Hi everyone, when I install the TWRP using the flashable zip installer and then boot into TWRP it gets stuck in the TWRP logo and when I flash from fastboot it works fine, but I need to install it from flashable zip because I TWRP the I have to start with the partition slot A that also has the custom rom, I can't always change slot partitions every time I have to do operations with the TWRP.
Click to expand...
Click to collapse
Do you flash the rom before the twrp zip?
I found a workaround instead of using the zip package.
1. Get the current partition you are using:
Code:
fastboot getvar current-slot
2. Choose which partition you want to install to( in this case I'm using B, but you can use A if you like ) and flash the latest TWRP IMG file:
Code:
fastboot flash boot_b twrp-3.2.3-0-jasmine_sprout.img
3. Set the current partition to the one you just flashed:
Code:
fastboot set_active b
Yes but then to go to TWRP to do something I can't always use a PC and from fastboot change slots. I took so long to install Magisk.
I had to dump the boot partition, modify it with magisk manager and flash it with the TWRP, it doesn't seem like anything to dump but to me it was difficult because I don't have root at the beginning.
If I flash the TWRP in the boot partition in the resurrection remix slot, I lose the chance to start the custon rom
Fixed, after the 3000th time I flashed, then the TWRP starts up, I don't know how not to ask me why but now I try to hypothesize 2 solutions:
1) We have to stay for a while with the custom rom, then later when you will try to flash the zip, the TWRP will start.
2) You need to have both Magisk and TWRP installed in the boot in order to start the TWRP flashed from zip without problems.
These solutions do not know if they are like this or I am confusing myself, so it happened to me.
If in doubt, hoping for an update does not hurt, maybe the TWRP will start immediately with no problems in the future.
Related
Here is my tutor after a hard work on my zenfone 4 max whole day.
first of all you must download the last asus update for zenfone 4 max, I used 233.
put it into sd card, boot into stock recovery and update. (if you have a new phone just do it, if you already unlocked bootloader and installed twrp, just boot bootloader and flash stock recovery above.)
https://drive.google.com/open?id=1YP7v9sBclQULxYPOndDPCMLikZsT8urN
after this step, just do unlock bootloader. (if not unlocked), and flash twrp.
*recommended reboot recovery twrp and make a backup now
reboot bootloader and flash the boot above, it has no decrypt and magisk 16
https://drive.google.com/open?id=1bHk0znQNsH-dWZ89P525gC-rrvN4e9bl
reboot recovery twrp. Do the following:
format data partition,
reboot recovery twrp
clear data, cache and dalvik cache.
Now boot system, all data encrypt is gone, and you can activate it if you want.
You cant boot system until this boot image is flashed, or encrypt will be activated.
How does one flash the kernel?
amspady20 said:
How does one flash the kernel?
Click to expand...
Click to collapse
kernel is the core, it is in boot image.
fastboot flash boot boot.img
(after extract boot image, cause it is zipped)
Stock Recovery
Do you have stock recovery img file for our Zenfone 4 Max (ZC554KL)? Kindly upload it again.
Hi, do you have latest stock recovery for this device? I want to update to oreo, but it requires latest firmware (at least ver .352) to execute it.
latest recovery version
Hi alegmx!
i'm really thankful that you provide this stock recovery image , it works!
but can you provide us with a newer version of the recovery image? it'll be big help if you can provide it with us!
your version is currently .215 , im upgrading my os to version 412 and it needs atleast the .352 version of the recovery.
Hi, im having a little bit of a problem here, i succesfully managed to unlock the bootloader of my chinese mi8, flashed and booted twrp, the issue is, my files seem to be encrypted, i can't copy anything to the device while on fastboot/recovery mode from the pc, tried booting to miui, allowing the transfer of files and booting to twrp again (for some reason i can't boot to twrp from the device itself, it has to be via fastboot with the command "fastboot boot ***") but all twrp shows me are folders with random characters, it seems to be some sort of auto-encryption, do you know how to solve it?
Miui auto encrypts the device, that is why your device is encrypted. You are unable to boot to twrp for two reasons: 1. Miui auto checks and rewrites over any custom recovery 2. Fastboot boot command does not install twrp, it only boots into it, from which u must install twrp again.
Upon booting into twrp, you need to FORMAT data, flash TWRP, flash this file https://zackptg5.com/android.php#disverfec (DM-verity and anti-encryption) this will prevent anti encryption when your freshly flashed ROM boots up.
Side note: DO NOT RELOCK YOUR BOOT LOADER IF YOUR MI 8 IS CHINA VARIANT AND YOU ARE INSRALLING GLOBAL ROM.
I HIGHLY SUGGEST YOU HEAD OVER ONTO THIS THREAD TO UNDERSTAND BETTER! https://forum.xda-developers.com/mi-8/development/rom-mi-8-miui-10-global-beta-8-8-7-t3826560/page7
achickennugget said:
Miui auto encrypts the device, that is why your device is encrypted. You are unable to boot to twrp for two reasons: 1. Miui auto checks and rewrites over any custom recovery 2. Fastboot boot command does not install twrp, it only boots into it, from which u must install twrp again.
Upon booting into twrp, you need to FORMAT data, flash TWRP, flash this file https://zackptg5.com/android.php#disverfec (DM-verity and anti-encryption) this will prevent anti encryption when your freshly flashed ROM boots up.
Side note: DO NOT RELOCK YOUR BOOT LOADER IF YOUR MI 8 IS CHINA VARIANT AND YOU ARE INSRALLING GLOBAL ROM.
I HIGHLY SUGGEST YOU HEAD OVER ONTO THIS THREAD TO UNDERSTAND BETTER! https://forum.xda-developers.com/mi-8/development/rom-mi-8-miui-10-global-beta-8-8-7-t3826560/page7
Click to expand...
Click to collapse
Ok, lets see if i got it right, just to be sure...
i boot to twrp
i format data in twrp (only data)
flash the twrp file from fastboot
flash the file for preventing encryption IN TWRP
flash my rom of choice
what i did was
1.flash global stable 9.5 via fastboot
2.Wait till it gets on
3.Restart the device
4.flash twrp via fastboot
5.install magisk 16.7 using twrp
6.install dm verity
7.format data
8.wait till it boots downgrade magisk to 16.0 via magisk manager
Hi, fellows,
High need urgently help!
I was on stock Pie with all critical unlock, bootloader unlock and root too ... So I decide to change to a costume firmware.
Now I'm on twrp-installer-3.3.0-0-jasmine_sprout.zip with all the partitions decrypted and when I tried to flash a custom firmware like Havoc OS v2.4 or Pixel Experience ... Happen this error.
Step 1/2
Error applying update: 7 (ErrorCode:: kInstallDeviceOpenError)
Updater process ended with ERROR: 1
Error installing zip file '/sdcard/Havoc-OS-v2.4-20190502-jasmine_sprout-Official.zip'
Updating partition details...
...done
Click to expand...
Click to collapse
Anyone can help me?
Thanks
nnexuss said:
Hi, fellows,
High need urgently help!
I was on stock Pie with all critical unlock, bootloader unlock and root too ... So I decide to change to a costume firmware.
Now I'm on twrp-installer-3.3.0-0-jasmine_sprout.zip with all the partitions decrypted and when I tried to flash a custom firmware like Havoc OS v2.4 or Pixel Experience ... Happen this error.
Anyone can help me?
Thanks
Click to expand...
Click to collapse
Try to use twrp 3.2.3 and follow this guide:
https://forum.xda-developers.com/mi-a2/how-to/guide-how-to-flash-custom-roms-stuff-t3876375
mma_1494 said:
Try to use twrp 3.2.3 and follow this guide:
https://forum.xda-developers.com/mi-a2/how-to/guide-how-to-flash-custom-roms-stuff-t3876375
Click to expand...
Click to collapse
I already tried this version but not the guide...
I'll try when I arrived at home
nnexuss said:
Hi, fellows,
High need urgently help!
I was on stock Pie with all critical unlock, bootloader unlock and root too ... So I decide to change to a costume firmware.
Now I'm on twrp-installer-3.3.0-0-jasmine_sprout.zip with all the partitions decrypted and when I tried to flash a custom firmware like Havoc OS v2.4 or Pixel Experience ... Happen this error.
Anyone can help me?
Thanks
Click to expand...
Click to collapse
Their is only one way to recover your phone just follow this step
1. Flash stock firmware(stock rom) vie fastboot using MI Flasher
this is bring back you phone and if you want to install custom rom then follow this
1. boot twrp
2. wipe all the data from slot A and B partition(internal storage as per you choice )
3. boot to slot B and copy past the custom rom file in slot B
4. flash that rom and boot to slot B and then flash Gaaps and other staff you want
5. reboot and enjoy.
NOTE: changing the slot require reboot twrp in simple words every time you change the slot you have to reboot the phone and boot again to twrp..
i hope this will work for you..:good:
If you don't have stock flash file then try from step 2. see whether it will work or not otherwise follow from beginning.
facing the same issue
i tried the same and getting the same error. even the twrp3.2.3.0 never worked while tried to flash that one more than 20 times, after flashing 3.2.3.0 my phone either boots normally or it gets completely power off. and if i try to boot into recovery using volume keys and power key , it boots in stock recovery. please help
Mine its ok now... i don´t know whats happen but suddenly it flash withou any problem.
See if it helps...
Make sure you're running a proper working Recovery
Flashing instructions:
Dirty flash (assuming you have rom on slot A):
1. Download all required files and place them to internal memory (ROM, twrp installer, gapps, magisk, ..)
2. Boot twrp to slot B and flash ROM and twrp installer
3. Reboot twrp to slot A and flash gapps (optional magisk)
4. Now reboot to system
Clean flash (assuming you have rom on slot A):
1. Download all required files and place them to internal memory (ROM, twrp installer, gapps, magisk, ..)
2. Boot twrp to A slot and wipe everything except for internal
3. Reboot twrp to B slot and flash ROM and twrp installer
4. Reboot twrp to slot A and flash gapps (optional magisk)
5. Now reboot to system
If you are coming from stock:
1. Download latest TWRP installer and image
2. Open cmd and type fastboot boot twrp.img (change twrp to its actual name)
3. You should be on slot A in twrp, if not change it and reboot to bootloader and repeat step 2.
4. Format data
5. Now follow instruction for clean flash
Click to expand...
Click to collapse
Credits: Fullbustah
I have this issue and none of the steps worked.
I got my device 2 days back and it was in Oreo. I tried to update to pie but the update keep failing. I unlocked the phone and flash latest official fastboot rom using mi_flash and installed magisk using this guide:
https://forum.xda-developers.com/mi-a2/how-to/unlock-bootloader-n-root-magisk-easy-t3856800
Everything went smooth.
Today I tried to go further and instal PE rom using this guide:
https://forum.xda-developers.com/mi-a2/how-to/guide-how-to-flash-custom-roms-stuff-t3876375
Everything goes smooth until I boot to TWRP and try to flash the rom. It gave the error posted by OP. I have tried the following things since:
1. Try another two roms, same issue
2. Flash stock Pie using mi_flash then temp boot to TWRP latest version from 'a' partition, wipe everything, then boot from 'b' partition, wipe everything, try to flash. Same issue.
3. Install TWRP (it installed without any issue), reboot to installed TWRP, flash rom, same issue.
4. Try to flash with 'a' as active. Same issue.
5. All other possible combos (i think) of the above. In all cases everything goes as expected until I try to flash the rom.
Currently I have flashed the factory image back. Any help will be greatly appreciated.
So I've used TWRP r16 and it throws an "Image not signed or corrupt" error as suggested by other users I ignored it, but everytime I reboot to system and try to get to recovery "no command" show's up meaning TWRP was replaced by stock recovery all help will be appreciated.
Thanks
Akash731 said:
So I've used TWRP r16 and it throws an "Image not signed or corrupt" error as suggested by other users I ignored it, but everytime I reboot to system and try to get to recovery "no command" show's up meaning TWRP was replaced by stock recovery all help will be appreciated.
Thanks
Click to expand...
Click to collapse
You need to flash Magisk after flashing TWRP
1. Flash Latest TWRP
2. Reboot to TWRP
3. Flash Magisk
If you boot in to system after flashing TWRP, TWRP will be removed
pradeeppk said:
You need to flash Magisk after flashing TWRP
1. Flash Latest TWRP
2. Reboot to TWRP
3. Flash Magisk
If you boot in to system after flashing TWRP, TWRP will be removed
Click to expand...
Click to collapse
Hey thanks that worked.
But everytime I boot to system and boot to twrp the data gets encrypted and I can't access the files do you happen to know any solution for this?
Akash731 said:
Hey thanks that worked.
But everytime I boot to system and boot to twrp the data gets encrypted and I can't access the files do you happen to know any solution for this?
Click to expand...
Click to collapse
If you are on stock Rom, according to my knoweldge it is not possible to remove encryption, if you format your date in twrp for removing encryption then reboot to system you can see that the phone is again encrypted.
But in custom roms this doesnt happen.
pradeeppk said:
You need to flash Magisk after flashing TWRP
1. Flash Latest TWRP
2. Reboot to TWRP
3. Flash Magisk
If you boot in to system after flashing TWRP, TWRP will be removed
Click to expand...
Click to collapse
pradeeppk said:
If you are on stock Rom, according to my knoweldge it is not possible to remove encryption, if you format your date in twrp for removing encryption then reboot to system you can see that the phone is again encrypted.
But in custom roms this doesnt happen.
Click to expand...
Click to collapse
I don't want to try custom rom's as this is my main device guess I'm stuck with the encryption then thanks for your help. :good:
Edit:-
Tried TWRP r20 it decrypts fine thanks
pradeeppk said:
You need to flash Magisk after flashing TWRP
1. Flash Latest TWRP
2. Reboot to TWRP
3. Flash Magisk
If you boot in to system after flashing TWRP, TWRP will be removed
Click to expand...
Click to collapse
You don't have to flash Magisk after flashing TWRP. The two are unrelated.
After flashing TWRP you have to boot into recovery, not system. Once TWRP was started, you can reboot into system. No need for Magisk (unless you want Magisk anyway).
gewe said:
You don't have to flash Magisk after flashing TWRP. The two are unrelated.
After flashing TWRP you have to boot into recovery, not system. Once TWRP was started, you can reboot into system. No need for Magisk (unless you want Magisk anyway).
Click to expand...
Click to collapse
It will not work in stock ROM, if you flash a custom rom there is no need to flash Magisk.
You should flash Magisk or custom kernel after flashing TWRP otherwise it will be erased.
Google about TWRP erasing after reboot you should get too many posts regarding this
This is one of them
https://forum.xda-developers.com/oneplus-3t/help/twrp-deleted-booting-t3769867
pradeeppk said:
It will not work in stock ROM, if you flash a custom rom there is no need to flash Magisk.
You should flash Magisk or custom kernel after flashing TWRP otherwise it will be erased.
Google about TWRP erasing after reboot you should get too many posts regarding this
This is one of them
https://forum.xda-developers.com/oneplus-3t/help/twrp-deleted-booting-t3769867
Click to expand...
Click to collapse
I am using stock ROM, and yes, also Magisk (installed later). IIRC Magisk is not needed for TWRP to work. When I receive the next OTA notification, I will test this.
The thread you are referring to is for a OnePlus 3T. For our device this is the thread: https://forum.xda-developers.com/moto-g5s-plus/development/recovery-twrp-3-1-1-r7-t3694910.
Since there is no official TWRP for the Moto G5S Plus, I took the following text from the TWRP page for the Moto G5S.
Note many devices will replace your custom recovery automatically during first boot. To prevent this, use Google to find the proper key combo to enter recovery. After typing fastboot reboot, hold the key combo and boot to TWRP. Once TWRP is booted, TWRP will patch the stock ROM to prevent the stock ROM from replacing TWRP. If you don't follow this step, you will have to repeat the install.
Click to expand...
Click to collapse
Instead of that you can also use fastboot reboot-bootloader, and then from the bootloader start recovery.
pradeeppk said:
It will not work in stock ROM, if you flash a custom rom there is no need to flash Magisk.
You should flash Magisk or custom kernel after flashing TWRP otherwise it will be erased.
Google about TWRP erasing after reboot you should get too many posts regarding this
This is one of them
https://forum.xda-developers.com/oneplus-3t/help/twrp-deleted-booting-t3769867
Click to expand...
Click to collapse
Two days ago I received a notification for an OTA update, containing the August 2019 security patches.
After going back to stock ROM, installing all the updates up to the latest, I installed TWRP. After booting into recovery, and then into system, and recovery again, TWRP was gone. Strange, I don't remember this happening before. Maybe I always installed Magisk before booting into system.
Bottom line: you were right, I was wrong. Thanks for pointing it out.
gewe said:
Two days ago I received a notification for an OTA update, containing the August 2019 security patches.
After going back to stock ROM, installing all the updates up to the latest, I installed TWRP. After booting into recovery, and then into system, and recovery again, TWRP was gone. Strange, I don't remember this happening before. Maybe I always installed Magisk before booting into system.
Bottom line: you were right, I was wrong. Thanks for pointing it out.
Click to expand...
Click to collapse
As like you said this is the first time in my life i need to flash magisk to stick twrp.
I usualy doesn't use root or custom roms, install twrp, remove unnecessary apps from stock system, replace host files with adaway hosts, replace or edit gps config files. and continue using stock.
This is the main routine from Android 1.5
(Samsung spica (i think it was the first Android phone from Samsung)).
It may be due to security reason stock kernel or system delete twrp.
When installing magisk it patch stock boot image, that may be the reason of twrp remains after flashing magisk.
Hi there,
I've been rooting phones since Android 2, but lately it has been quite a challenge.
What I did so far:
Unpack new Xiaomi MI A2 (jasmine) device
Enabled Developer, USB debugging, OEM unlock in Android settings
Code:
fastboot oem unlock
Code:
fastboot flash boot_b TWRP-3.2.3-jasmine-20180804.img
TWRP ran fine. However, started with boot_a again.
OTA updated (about 6 times) to the newest version (Android 10, QKQ1.190910.002 V11.0.12.0.QDIMIXM)
Code:
fastboot flash boot_b twrp-3.4.0-0-jasmine_sprout.img
TWRP started only to the splash screen (showing "teamwin" and "Recovery Project 3.4.0-0"). Why is TWRP not starting properly?
Downloaded the stock fastboot image V11.0.12.0.QDIMIXM from https ://xiaomifirmwareupdater.com/archive/miui/jasmine/ and flash the stock boot.img via
Code:
fastboot flash boot_b jasmine_global_images_V11.0.12.0.QDIMIXM_10.0/images/boot.img
(my goal is to later patch it with Magisk and then install the patched version). However, the stock boot.img just hangs forever on the androidone screen. Why is the stock boot.img not starting properly?
I haven't used the Mi Unlock app and I didn't do an "fastboot flashing unlock_critical" yet. Is this necessary? What do I have to do to make the boot images work?
floydsen said:
Hi there,
I've been rooting phones since Android 2, but lately it has been quite a challenge.
What I did so far:
Unpack new Xiaomi MI A2 (jasmine) device
Enabled Developer, USB debugging, OEM unlock in Android settings
TWRP ran fine. However, started with boot_a again.
OTA updated (about 6 times) to the newest version (Android 10, QKQ1.190910.002 V11.0.12.0.QDIMIXM)
TWRP started only to the splash screen (showing "teamwin" and "Recovery Project 3.4.0-0"). Why is TWRP not starting properly?
Downloaded the stock fastboot image V11.0.12.0.QDIMIXM from https ://xiaomifirmwareupdater.com/archive/miui/jasmine/ and flash the stock boot.img via (my goal is to later patch it with Magisk and then install the patched version). However, the stock boot.img just hangs forever on the androidone screen. Why is the stock boot.img not starting properly?
I haven't used the Mi Unlock app and I didn't do an "fastboot flashing unlock_critical" yet. Is this necessary? What do I have to do to make the boot images work?
Click to expand...
Click to collapse
why do you feel you must use boot images ...the tried and working method for "jasmine" is to boot custom recovery and then flash magisk zip ( root only ) ..or...flash custom recovery installer zip which will flash recovery to both a/b slots.. then flash magisk
to properly boot you need to overcome stuff like secure boot and force encryption
if you aren't planning on custom roms just boot twrp to flash magisk
or
flash installer zip for recovery and wipe everything including formatting data to remove encryption and boot directly to recovery to install custom rom
twrp custom recovery had problems with decryption on stock rom ...secure boot won't allow booting modified images ..
lastly remember on jasmine there is no recovery partition..so everything is in the boot image ..magisk and recovery ..so everytime you flash stock , stock boot overwrites these changes and should flash everything again
tbh that's why i converted to wayne to get old partition layout as the A/B story pissed me off
KevMetal said:
why do you feel you must use boot images ...the tried and working method for "jasmine" is to boot custom recovery and then flash magisk zip ( root only ) ..or...flash custom recovery installer zip which will flash recovery to both a/b slots.. then flash magisk
to properly boot you need to overcome stuff like secure boot and force encryption
if you aren't planning on custom roms just boot twrp to flash magisk
or
flash installer zip for recovery and wipe everything including formatting data to remove encryption and boot directly to recovery to install custom rom
twrp custom recovery had problems with decryption on stock rom ...secure boot won't allow booting modified images ..
lastly remember on jasmine there is no recovery partition..so everything is in the boot image ..magisk and recovery ..so everytime you flash stock , stock boot overwrites these changes and should flash everything again
tbh that's why i converted to wayne to get old partition layout as the A/B story pissed me off
Click to expand...
Click to collapse
Ok. So I'm back to Stock image jasmine_global_images_V11.0.12.0.QDIMIXM_10.0 by executing "flash_all.sh". You are saying I should "simply boot". You mean:
Code:
fastboot boot TWRP-3.4.0-0-jasmine_sprout-for_V11.0.12.0.img
right? That doesn't work, it won't boot. How do I overcome secure boot and force encryption?
floydsen said:
Ok. So I'm back to Stock image jasmine_global_images_V11.0.12.0.QDIMIXM_10.0 by executing "flash_all.sh". You are saying I should "simply boot". You mean:
right? That doesn't work, it won't boot. How do I overcome secure boot and force encryption?
Click to expand...
Click to collapse
yes im saying that but post a pic of the error ...why or how doesn't it boot ..
if it is the official twrp just dump it and look for the unofficial Russian one or one modified by Nebrassy or use Orange fox and or Pitch black ..official is broken last time i checked
also the name of that looks like one hell of a job ..shorten it to
recovery.img or twrp.img
fastboot boot recovery.img
but first run
fastboot getvar all
& also run fastboot flashing unlock_critical
but most importantly get another recovery
& i don't want to insult your intelligence but after flashing stock did you check to make sure bootloader was still unlocked and that dev settings was activated and that adb was toggled to on and that you authorised adb again
basicall after stock boot device and do the above ..plug in usb ..toggle adb ..authorise ..run adb devices ..if you see your device ..adb reboot bootloader ..fastboot devices ..see your device ..fastboot getvar all ..see bootloader is unlocked ..fastboot flashing unlock_critical if not done yet ...make sure to do ALL the above again after data gets wiped.....put twrp in adb folder ( MUST BE UNOFFICIAL RUSSIAN OR MODUFIED BY NEBRASSY ..rename to revovery.img ...fastboot boot recovery.img .. use file manager to put magisk.zip on internal then flash ..then reboot to rooted phone with stock recovery ...
Sent from my wayne using XDA Labs
KevMetal said:
why do you feel you must use boot images ...the tried and working method for "jasmine" is to boot custom recovery and then flash magisk zip ( root only ) ..or...flash custom recovery installer zip which will flash recovery to both a/b slots.. then flash magisk
to properly boot you need to overcome stuff like secure boot and force encryption
if you aren't planning on custom roms just boot twrp to flash magisk
or
flash installer zip for recovery and wipe everything including formatting data to remove encryption and boot directly to recovery to install custom rom
twrp custom recovery had problems with decryption on stock rom ...secure boot won't allow booting modified images ..
lastly remember on jasmine there is no recovery partition..so everything is in the boot image ..magisk and recovery ..so everytime you flash stock , stock boot overwrites these changes and should flash everything again
tbh that's why i converted to wayne to get old partition layout as the A/B story pissed me off
Click to expand...
Click to collapse
KevMetal said:
yes im saying that but post a pic of the error ...why or how doesn't it boot ..
if it is the official twrp just dump it and look for the unofficial Russian one or one modified by Nebrassy or use Orange fox and or Pitch black ..official is broken last time i checked
Sent from my wayne using XDA Labs
Click to expand...
Click to collapse
Of course it is the official one. OMFG twrp-3.4.0-0-jasmine_sprout.img is broken (freezes on the TWRP splash screen), but version 3.3.1 seems to work. That's a relief, so I will try to flash magisk now. Although, I think I will need to do the decryption thing for jasmine first, but I guess I'll follow https://www.the***********.com/install-twrp-recovery-root-xiaomi-mi-a2-a2-lite/ mostly
floydsen said:
Of course it is the official one. OMFG twrp-3.4.0-0-jasmine_sprout.img is broken (freezes on the TWRP splash screen), but version 3.3.1 seems to work. That's a relief, so I will try to flash magisk now. Although, I think I will need to do the decryption thing for jasmine first, but I guess I'll follow https://www.the***********.com/install-twrp-recovery-root-xiaomi-mi-a2-a2-lite/ mostly
Click to expand...
Click to collapse
jajaja well now you know ...be careful ...some "official" roms are also more buggy than unofficial ones for Jasmine/Wayne..
LOS is an example ..so be forewarned .. if you like android 1 i guess stock rooted is a smart option to keep updates and keep device certified for google stuffs . .
alternativeky go FULL custom rom because stock and custom recovery is just a pain and not worth the hassle on an A/B treble device flashable by fastboot ..just boot the recovery when if ever needed
fyi ..you can flash magisk and it will boot ...if you don't try changing the recovery ..so you can have stock rooted with magisk without rcustom recovery...* recommended by me if you only wamt stock with root
Sent from my wayne using XDA Labs
All good now, thanks for your help! I just flashed Magisk (and also TWRP) and everything works nicely! I will need to get some experience, but I'll keep in mind that I maybe want to get rid of the TWRP recovery. Finally security testing is fun again. Thx!