Hello xda users,
I need HELP !
I have a galaxy tab P1000
currently froyo 2.2
wanted to upgrade to GB
Tried the Odin way from another link on this site (MANUAL updation for galaxy tab(p1000) into 2.3.3 gingerbread ), it failed and the Tab got soft bricked,
somehow managed to unbrick it, now its back to its original fw, but it keeps restarting in a loop until i switchd the damn thing off completely
I have tried to go in download mode to flash but odin doesnt recognise it , tried differnt computers too, no use.
I have gone in recovery mode, hard reset, wipe cache , still when i switch it on, it goes in a reboot loop.
tried to use heimdall. cant get sucess as i might not understand how to use it properly
Please help.
Sincere thanks to you if you can help me get my tab up and running., if not in GB atleast back in froyo.
(PS- i im not worried about my data , and i have not backed up the rom etc before doing any of these)
Try to reinstall or install a usb driver from samsung
tried that before , didnt work
anyway now i managed to get it detected on ODIN and flashed it to GB
Libon
Yeah, happened to me too, nearly had a sh*t my pants when Odin didn't recognise my Tab.
I would recommend -
charge the Tab fully using wall adapter (4 hrs+)
plug it in with Odin open and using USB cable
don't expect Odin to recognise the Tab immediately
check back after 5 mins or so (I don't know, does Odin refresh?)
I was able to restore my Tab from the PC - ! - Marvin screen.
I don't want to go back there again though!
yea dude.. same here
i kept it on charge for a couple of hours and then tried.. bam it conencts..
Libon
Tab not turning on
HI Guys I have Galaxy 1000 .I was updating it by using kies in between the process my computer shut down and when I am trying to connect my tab again its not turning on .can some one help me please ?
Waiting no charge baterry 2 3 j
Run odin
Connect tab . Wait Long time 20 30min
Tab is. Détect go flashing
Sorry for my english
I m.. French
Envoyé depuis mon GT-P1000
GT P1000 Odin wont detect
hi guys can you help me on my GT P1000 odin wont detect it even after 2-3hrs. tried everything but odin wont detect my device.
thanks in advance...
iamkakers said:
hi guys can you help me on my GT P1000 odin wont detect it even after 2-3hrs. tried everything but odin wont detect my device.
thanks in advance...
Click to expand...
Click to collapse
do u have samsung kies installed in your pc? if does, kill the kies process (Ctrl+Alt+Del). close, and open odin3, put your tab into download mode, and then plug it into usb port. try to change different ports.
i always had this problems.. if all if that didn't work, i'll format my pc
Sent from my GT-P1000
odin3
hi
i also have a gt p1000 and odin3 doesnt detect the tab. i've been trying to root my tab for a while, tried odin and it doesnt detect, tried doomlord and it doesnt even get past the first step. i tried uninstalling kies on my windows 8 laptop and still no luck im not too sure what to do. is there something that i might be doing wrong because i follow all the info thati get from here.
is there another rooting app i can try that doesnt brick my device? and or is there an app that i can get that i am able to use a ps3 controller on my device that does not require a rooted device. please help
thanks
My Galaxy tab also doesn't connect to usb after cache wiped humber os flash
Thanks in advance guys!..
Earlier I was using Cyanogen mode 10 Custom ROM but has few issues like recognize SD card.
later I flashed to Humber OS caused real problem.
It was clock work recovery installed but my tab tab boots stays on screen humber OS.
It goes to recovery mode, and also to some unknown recovery mode.
Either the way not recognized by computer. I tried all options like heimtal an Odin. No help.
Friends any help, would be highly appreciated.
BUMP
Any solution to this given the fact that usb drivers have been installed?
Are you sure it is recognised by the computer before trying Odin or Heimdall?
I seen this in a post:
#################################################################################
4 Reasons Why Odin is Not Detecting Your Android Device:
Reason 1: No drivers installed for your phone
Most of the time Odin is not able to detect your phone, simply because you haven’t installed the drivers for your phone. Normally windows would automatically download the respective drivers for your phone from the internet and install it. But in case it isn’t able to do so, you need to download the drivers from your phone manufacturer’s website.
Reason 2: Inferior quality or damaged USB cable
Odin is very sensitive to low quality or damaged USB cables, which is a major reason why odin will detect your android phone in file transfer mode but fail to detect it in download mode. You might have a genuine USB cable that came with your Android phone but with time its quality will depreciate, which is why you might have to get a new USB cable.
Reason 3: Odin is corrupted
This happened once with a reader on my blog, we tried everything to solve his problem, but in the end using a different version of Odin worked out for him.
Reason 4: USB port is defective
Defective USB ports can also be a reason for Odin not detecting your Android phone. This was a problem faced by one of my readers and plugging the USB cable in another USB port worked out for him.
#######################################################################
and I need install cwm recovery on a twrp recovery and just do that with this app:
ROM Manager
if you want do same job; you can download it from google play easily!
and install recovery,rom or restore backup with it.
farza(db)astany said:
I seen this in a post:
#################################################################################
4 Reasons Why Odin is Not Detecting Your Android Device:
Reason 1: No drivers installed for your phone
Most of the time Odin is not able to detect your phone, simply because you haven’t installed the drivers for your phone. Normally windows would automatically download the respective drivers for your phone from the internet and install it. But in case it isn’t able to do so, you need to download the drivers from your phone manufacturer’s website.
Reason 2: Inferior quality or damaged USB cable
Odin is very sensitive to low quality or damaged USB cables, which is a major reason why odin will detect your android phone in file transfer mode but fail to detect it in download mode. You might have a genuine USB cable that came with your Android phone but with time its quality will depreciate, which is why you might have to get a new USB cable.
Reason 3: Odin is corrupted
This happened once with a reader on my blog, we tried everything to solve his problem, but in the end using a different version of Odin worked out for him.
Reason 4: USB port is defective
Defective USB ports can also be a reason for Odin not detecting your Android phone. This was a problem faced by one of my readers and plugging the USB cable in another USB port worked out for him.
#######################################################################
and I need install cwm recovery on a twrp recovery and just do that with this app:
ROM Manager
if you want do same job; you can download it from google play easily!
and install recovery,rom or restore backup with it.
Click to expand...
Click to collapse
reason 1: my phone is samsung and it's detected by ODIN, kies and I transfer files from and to my computer without problems. also tried reinstalling just in case but nothing, so I guess this is not the answer for my problem
reason 2: tried with original cable, but as I didn't use the tablet for a long time I also thought it could be the cable, so I asked a friend of mine if he could lend me one cable, but that didn't work. pity. :/
reason 3: tried 3 different versions of ODIN, and in every version my phone (mentioned above) is detected. shame. :S
reason 4: tried the 3 different USB ports in my laptop. two 2.0 USB ports and one 3.0 USB port, so again I doubt this is the reason of my problem.
extra reason: ~~~ maybe it's the OS version ~~~ // this laptop came with windows 8 preinstalled. nothing. then, I updated to win 8.1. again nothing. now I'm running windows 10 and the same, nothing is detected neither by ODIN nor the computer. also tried in 4 different computers running win xp, win 7 and other with win 8.1.
btw, thank you anyway for your apportation; this may help other people, but unfortunately, it's not my case, so can anybody else join me to think about a new reason and a way to solve it? thank you very much :good: :highfive: :fingers-crossed:
~~~~~~~~~~~~ EDIT ~~~~~~~~~~~~
I have continued researching and found a software. it didn't work for me, but maybe it works for other people.
-first, you have to make sure you have java installed on your computer.
-second, extract the oneclick.rar file on an easy-access directory.
-third, put your tab on download mode (while charging icon when tab is turned off, press power + volume down until a yellow triangle appears).
-fourth, click start unsoft-brick and let the magic begin! 8)
note: if a warning error pops up, trust the software and click on resolution center and follow the instructions of one of the three "alternative ways".
download: https://www.dropbox.com/s/8ix6yygu23a1kjn/OneClick.rar?dl=0
good luck!!
help
blizzard_boy said:
tried that before , didnt work
anyway now i managed to get it detected on ODIN and flashed it to GB
Libon
Click to expand...
Click to collapse
hi can you plz help me out with the processess you followed to as im suffring the same problum only CWM working and even it shows sd card mount error also not installing any rom via SD card showing error and odin not detecting it nothing happening only CWM and blank screen
blizzard_boy said:
tried that before , didnt work
anyway now i managed to get it detected on ODIN and flashed it to GB
Libon
Click to expand...
Click to collapse
How did you did it im having the same error???
i did the same thing with my tab exactly like yours plzzzz help me recover it
i try to flash my device but fast boot recovery bricked now i cant open droid boot or android Os. when i try to power on device an USB logo show in the screen and device powered off in 1 second. in my device connect to computer via USB cable ,USB logo remain in screen for a few minutes. fastboot and adb cant find my device. any one can help me?? tanks
Sorry for the Long wait
I hope u receive this before going off to buy a new tablet.Or did u send it to Asus warranty and did they give u a new one for free.(Plzz reply and tell me. Also I found this procudure in how to get adb and fastboot to work again. Go to this fourm http://forum.xda-developers.com/memo-pad-7/general/howto-unbrick-hardbricked-memo-pad-t3105945 and follow the instrucftions. it works with the me170cx well but with other versions not so much. i'm going to try this and hopefully this works:laugh:
Does anyone know how to unlock me170c bootloader and have custom recovery installed?
Bricked Asus Me70cx
I am having the exact same problem. Tried using Intel flash tool and keep getting windriver error timeout. I have tried starting flash before usb screen comes and waiting for screen to load. I have loaded all usb drivers like other post state and still can't get tablet working. Please someone help!
PLEASE NOTE the tab will not do a factory reset, when I try that it tells me it has successfully erased all the data but when I reboot it it still comes up with the same screens as described below
Got a new S2 8 inch from Sprint but couldn't remember my password so I never activated it ... it worked fine. Great. No activation fee, no monthly access charge, no running up excess minutes accidently.
Truth is all I ever wanted was a pure WiFi tab to replace a Nexus 9. I just bought from Sprint because they were having a sale. Without activation I had exactly the tablet I wanted.
Than I got greedy ... decided to streamline performance by tossing out all the superfluous phone apps and system stuff ... this seemed to work well to ... or at least it did before I rebooted the phone. Now I get a black screen with a flashing red message: Kernel is not SE Android enforcing. Custom binary blocked by FHP block.
All this is Greek to me, but that aside when I try to boot up I get one of two options depending on what hard key compos I hold. One is an endless download loop, the other is the standard Android mini recovery boot page. Of all the options, the seemingly easiest delete cache and restore default system doesn't work. The other potentially useful items .... update from file, update via download, etc. require an ADB connection to work. I have tried to establish an ADB connection using many different cables on both a Win 19 and a Win 7 PC ... in each case I get the dread "wouldn't open Code 10) message .... I have tried it with specific adb drivers and generic ones ... the results are always the same.
A fw other tips, the Android System Recovery LMY47x.T817PVPS2A0L1 screen says:. in yellow at the bottom of the screen, dm-verification failed ... update from ADB blocked and gives similar messages under"apply update from external storage, and and apply update from cache
Meanwhile, back at the downloading loop page we are told:
ODEN MODE
DOWNLOAD SPEED : FAST
PRODUCT NAME SM T817P
CURRENT BINARY: SAMSUNG OFFICIAL
FAP LOCK: ON
Secure Download: Enabled
Knox Warranty Void: ZERO
HP: SWHEV: B:2 K:8 S:0
So please, please, please does anyone have any idea what's going on here and how I can fix it ... would it, for example., be possible to reinstall the ROM and OS via a USB stick and OTR cable ... if so how would you do it .......
Thank you, thank you, thank you
Forgot to mention Samsung G6 phone connects to PC correctly through same cable ... Device Manager shows Code 10 message when nothing Android is connected to a USB port or when the S2 is connected does not show Code 10 and works perfectly when G6 is connected .... would it be possible to boot and restore the tablet via a USB stick and OTR cable? Thanks again
Hi, Guys, girls, men and women ... I'm not to proud to beg ... one of you must have an answer to this puzzle ... if you do and it works I'll use the my G6 to send you a video of me pushing a peanut around with my nose. Is there really no way to bot or restore this thing via a USB flash drive?
this seems like it could definitely help you
If you can boot into download mode (press volume down and home button as you power on the tablet. Continue holding the buttons down until you get the download warning message).
If successful, download the latest version of Odin to your computer. Also go to sammobile.com and search for your device in the firmware section. Download the appropriate firmware to your computer. You will also need the Samsung drivers for your device on your computer as well.
You should be able to flash it back to stock with Odin. There several threads on xda that give instructions on how to use Odin.
Hello, I have this kind of a problem... I connect my Lenovo (Running unofficial Rom of Lineage 14.1(7.1.1.) (linking pics later)) and click on the Android file transfer I I get this text...
"No Android Device found
Please connect your Android device with a USB cable to get started"
What I can do to fix it??
I used to CMW recovery to format my phone...
And also OTG isn't working?
Can some one help me?
hi my phone micro usb port is broken
and i need to flash any rom for my phonée to work
but i can't and i don't have twrp i only have the original recovery
so please can you give me a backup file to restore it from my phone to make it work again
or any rom can be flashed by the original doogee x5 recovery
hope you understand me
AKBIROCK3 said:
hi my phone micro usb port is broken
and i need to flash any rom for my phonée to work
but i can't and i don't have twrp i only have the original recovery
so please can you give me a backup file to restore it from my phone to make it work again
or any rom can be flashed by the original doogee x5 recovery
hope you understand me
Click to expand...
Click to collapse
You might struggle to find a file/rom to do this.I don't even know if it's possible.Small phone shops can usually replace the USB ports.
There videos on Youtube that can help you do it yourself if you can find a replacement usb port,
https://www.youtube.com/results?search_query=replace+doogee+usb+port
AKBIROCK3 said:
hi my phone micro usb port is broken
and i need to flash any rom for my phonée to work
but i can't and i don't have twrp i only have the original recovery
so please can you give me a backup file to restore it from my phone to make it work again
or any rom can be flashed by the original doogee x5 recovery
hope you understand me
Click to expand...
Click to collapse
I realize this is a late reply, but I just happened to read your issue. I had an identical problem with a Moto E (2nd Gen) -- damaged USB port. (My device would charge, but would not establish a data connection with my PC.) With some YouTube guidance and some rudimentary knowledge on schematics of the logic board, I was able to splice into a micro USB cable and connect the necessary data wires (yellow and green) directly to the USB solder points on the board, then connecting the male USB-A to my PC, thus initiating a successful fastboot connecton and the ability to flash TWRP. From there I was able to flash a custom ROM and recover my device. Anyway, I just wanted to share my experience in resolving the issue. Hope you can get it recovered my friend.