Hi everyone, I have problems starting GSI, I once managed to start the pixel 2 Android Q GSI with Android oreo stock vendor, now I would like to install any GSI with AospExtended Vendor but I can't install any GSI, like I do to install a GSI correctly?
For a gsi you must be on stock rom, no gsi will boot on a custom rom vendor
What if I flash the recovery stock rom and then flash the GSI?
Related
TREBLE COMPATIBILITY FOR YUREKA BLACK (Tinno p7201)
Guide and Vendor Zips Should work on Tinno p7201 clones - Wiko U feel prime , Blu Life One X2 mini, and Cect Digi U
Disclaimer:
WARNING, IT REPARTITIONS THE DEVICE SO DONT FLASH ON LOW BATTERY.
IF YOU DON'T KNOW WHAT UNLOCKING IS OR WHAT A PARTITION IS , BETTER NOT USE THIS.
!!! Whatever you do, it is at your own risk !!!
*************************************************************************************************************
How to Install
Flashing recovery
1. Flash Treble TWRP recovery given in downloads (important).
2. Reboot to recovery.
Re-partition & Treblize Device
Flash Treble Partitioner tool edited for Yureka Black in treble recovery. (Important Note: Only use the recovery given for download in next post (Twrp that has orange accents and splash) and the tool works properly only in it. Use this recovery whenever you use this tool. You can change recoveries later. Use of other recoveries to flash partition tool can put phone in a no-OS state).
Follow the on screen instructions while using tool.
Reboot to recovery.
Wipe System and Vendor.
If system or vendor aren't mounting change their filesystem to ext4.
Reboot to recovery.
From now you can flash Roms with Twrp or Any other recently built recovery ( Any treble twrp, Official twrp in twrp.me/ Pitch black recovery or (Twrp that has orange accents given after this post)).
GAPPS and MODS work properly only when flashed with latest recoveries and I don't maintain them.
All actions performed here are reversible.
As far as i know, everything here has been used > 100 times for several years and works.
If you want to flash GSI
Flash the Rom zip
Wipe system, Flash the GSI image to system & wipe data.
GSIs don't boot on android 11 right now. Please contact your Rom/Os maintainer for device and ask them to fix it.
*************************************************************************************************************
IMPORTANT:
For ERROR: 7 & in TWRP on flashing non treble roms.
Garlic was not released with treble ! Non treble Roms which are based on android 10 and prior for garlic CANNOT be flash after partitioning,
You need to remove vendor using partitioning tool again on partition tool required recovery.You can then flash non treble Roms like before or change recoveries.
*************************************************************************************************************
Credits----Source Maintainers & Co
Treble Party Tool:- @Oki - For TREBLE - PARTY TOOL --@someone755 for the keycheck binary--- @Zackptg5 for the V4A install script.
Recovery----Teamwin&Team
Give me a thumbs-up if it helped you
DOWNLOADS IN NEXT POST
DOWNLOADS
PARTITION TOOL
TREBLE TWRP
MORE HELP
Does it require Data Format?
No
What GSI can boot?
All GSI depending on Oreo or Pie depending on respective vendors along with Sgsi like MIUI,Zui, OOS and other Sgsi ports. No GSI will boot on Android 11 (Ask device maintainers).
Why are non treble custom roms no longer flashing?
Because custom roms are made for 4.7gb system , unless the dev mentions 3.7gb system , they cannot be flashed along with treble.
If you want to revert to non-treble custom roms..
Reflash the Party tool and choose option to remove vendor partition.
I'm on Android Nougat (7.1.1) and have a Wiko U Feel Prime.
Am I able to flash this treble or do I need a 8.0 custom ROM to enable treble.
Also can I flash any gsi I found out there or do I need a specific gsi for this since it isn't an originally supported treble device
Noobyguy said:
I'm on Android Nougat (7.1.1) and have a Wiko U Feel Prime.
Am I able to flash this treble or do I need a 8.0 custom ROM to enable treble.
Also can I flash any gsi I found out there or do I need a specific gsi for this since it isn't an originally supported treble device
Click to expand...
Click to collapse
Hello , there are standalone vendor zips in the post .First you need to repartition , after doing it you dont need a custom treble rom, flash my treble twrp, then just flash the vendor zip + bootimage and any GSI (pie GSI for pie vendor and Oreo GSI for oreo vendor) after wiping data.GSIs are not bug free. If you have any doubts/want to know the latest development going on the device, I strongly suggest you to join the telegram group, there are few wiko u feel prime users in our group.
Hello everyone!
Someone knows how to install GSI ROMS (Project Treble Forum) in our XZ1 Compact?
Your bootloader must be unlocked.
You must enter fastboot on your phone.
If you want to flash an Android 9.0 GSI be sure that you are on Android 9.0 stock rom, if you want to flash an Android 8.0 based GSI be on stock OREO rom.
Android 10 GSI won´t work on our phone.
type in: fastboot.exe flash system YourNameofGSI.img
fastboot.exe reboot
That`s it. I tried it with phh´s treble AOSP 9.0 GSI. Works fine.
SkyHigh76 said:
Your bootloader must be unlocked.
You must enter fastboot on your phone.
If you want to flash an Android 9.0 GSI be sure that you are on Android 9.0 stock rom, if you want to flash an Android 8.0 based GSI be on stock OREO rom.
Android 10 GSI won´t work on our phone.
type in: fastboot.exe flash system YourNameofGSI.img
fastboot.exe reboot
That`s it. I tried it with phh´s treble AOSP 9.0 GSI. Works fine.
Click to expand...
Click to collapse
SkyHigh is correct. Just make sure you're on stock rom then enter fastboot mode and flash the GSI to system and reboot.
I'm using /e/ Pie and it works great.
SkyHigh76 said:
Your bootloader must be unlocked.
You must enter fastboot on your phone.
If you want to flash an Android 9.0 GSI be sure that you are on Android 9.0 stock rom, if you want to flash an Android 8.0 based GSI be on stock OREO rom.
Android 10 GSI won´t work on our phone.
type in: fastboot.exe flash system YourNameofGSI.img
fastboot.exe reboot
That`s it. I tried it with phh´s treble AOSP 9.0 GSI. Works fine.
Click to expand...
Click to collapse
Thanks for reply. Do you tried install GSI ROM using TWRP?
Yes, you can do. Just switch from ZIP to Image and put it to system partition. It works the same way.
Can Android 13 GSI ROMs work on this phone?
The only GSI rom that used to work on my phone was Resurrection Remix Q (8.6.5). Now none of them work. When I flash Android 10 GSIs (A/B A64 vndklite ofc) they only get to the loading screen and they stay there. Android 11 roms don't even boot up. Is there any way to get GSI roms working? FYI, I tried everything (well, almost) to make it work. I tried booting with and without Magisk, I tried flashing with and without GAPPS, I even flashed an ARM64 Treble vendor, and none of it works.
Edit: I'm gonna try flashing a stock Android 11 vendor. I'm gonna keep y'all up to date.
Edit 2: It worked. I managed to install dotOS R 5.2 along with Magisk 24.3 with absolutely no issues.
are there any bugs on gsi rom what works and what doesnt work
Download ROGUI Android 12 GSI - ROM-Provider
Download ROGUI Android 12 GSI for all treble enabled devices, work on all AB devices with custom vendor
romprovider.com
How do i flash this rom? it says i need a custom vendor
i want to flash this as right now my phone has no rom installed and i want a rom that dosen't look stock
i don't want miui either
Please help.
How to install custom roms (GSI) 11T > Pro
How to install a gsi onto your Mi 11t > Pro This will wipe your phone and I'm not responsible for any bricked device's. you can always go back to stock and try again. Clean install suggested! 1.0 Start with downloading things Latest...
forum.xda-developers.com
Any user pixel 4a 5g install gsi custom rom?
kodri said:
Any user pixel 4a 5g install gsi custom rom?
Click to expand...
Click to collapse
It should be pretty straightforward. Download and extract the GSI. Reboot your phone to bootloader, flash the included vbmeta image, erase system, then flash the GSI to /system