Nokia 8 hangs on boot - Nokia 8 Questions & Answers

Hey there so, I've recently been trying to root my new Nokia 8. I have successfully unlocked the bootloader via downgrade to Android 8.1, and running HMD's app. I then have updated to 9 via OTA, and flashed TWRP to boot_b (the current active slot). Next i flashed Magisk 18.1 from the official thread here on XDA, using TWRP. Upon reboot, the phone now hangs and does not respond to any input. My only option is to let it go flat. Attempting to charge it afterwards, results in the red battery plug in icon, which does come up if i press any buttons. After it charges enough, it attempts to boot (kind of?) on its own, and just freezes, and i'm back to square one. This is a brand new phone so this would suck so bad if i can't fix it..
Thanks for any help guys

t0r3n0 said:
Hey there so, I've recently been trying to root my new Nokia 8. I have successfully unlocked the bootloader via downgrade to Android 8.1, and running HMD's app. I then have updated to 9 via OTA, and flashed TWRP to boot_b (the current active slot). Next i flashed Magisk 18.1 from the official thread here on XDA, using TWRP. Upon reboot, the phone now hangs and does not respond to any input. My only option is to let it go flat. Attempting to charge it afterwards, results in the red battery plug in icon, which does come up if i press any buttons. After it charges enough, it attempts to boot (kind of?) on its own, and just freezes, and i'm back to square one. This is a brand new phone so this would suck so bad if i can't fix it..
Thanks for any help guys
Click to expand...
Click to collapse
Which version of twrp did you flash ? Where did you get it from?
Flash the stock recovery of your pie version using the right file from here http://bit.ly/nokia-nb1 and then do a factory reset or sideload the pie rom.
Once that is done use the same link to flash the corresponding patched twrp boot img, boot into recovery and then flash magisk from inside twrp

MDV106 said:
Which version of twrp did you flash ? Where did you get it from?
Flash the stock recovery of your pie version using the right file from here bit.ly/nokia-nb1 and then do a factory reset or sideload the pie rom.
Once that is done use the same link to flash the corresponding patched twrp boot img, boot into recovery and then flash magisk from inside twrp
Click to expand...
Click to collapse
I got the TWRP version from the folder from that link actually.
I've managed to get the phone to boot somehow. The phone would expose fastboot for a few seconds after having just enough battery from getting a bit of charge after letting it go flat, before freezing when presumably trying to load the OS. So i managed to send 'fastboot reboot recovery' to it after letting it go flat once again, and successfully entered TWRP, and factory reset. Now my phone boots into Android, TWRP still flashed, and bootloader unlocked, but no root. What would the safest option to install magisk? Wouldn't want to brick the phone again...

t0r3n0 said:
I got the TWRP version from the folder from that link actually.
I've managed to get the phone to boot somehow. The phone would expose fastboot for a few seconds after having just enough battery from getting a bit of charge after letting it go flat, before freezing when presumably trying to load the OS. So i managed to send 'fastboot reboot recovery' to it after letting it go flat once again, and successfully entered TWRP, and factory reset. Now my phone boots into Android, TWRP still flashed, and bootloader unlocked, but no root. What would the safest option to install magisk? Wouldn't want to brick the phone again...
Click to expand...
Click to collapse
you can install it using Magisk Manager apk, or flash the Magisk zip file inside TWRP, your choice. I dont think either of the two menthods are risky

t0r3n0 said:
Hey there so, I've recently been trying to root my new Nokia 8. I have successfully unlocked the bootloader via downgrade to Android 8.1, and running HMD's app. I then have updated to 9 via OTA, and flashed TWRP to boot_b (the current active slot). Next i flashed Magisk 18.1 from the official thread here on XDA, using TWRP. Upon reboot, the phone now hangs and does not respond to any input. My only option is to let it go flat. Attempting to charge it afterwards, results in the red battery plug in icon, which does come up if i press any buttons. After it charges enough, it attempts to boot (kind of?) on its own, and just freezes, and i'm back to square one. This is a brand new phone so this would suck so bad if i can't fix it..
Thanks for any help guys
Click to expand...
Click to collapse
I currently have a similar problem. successfully installed twrp and booted into recovery to see if it works. It did. so now i got the magisk install zip and wanted to install it via twrp, but after executing adb reboot recovery my phone now is stuck on the bootloader unlocked warning screen. The phone doesnt react to any input and doesnt connect to adb or fastboot. currently waiting for the battery to die and try with a fresh reboot after that...

shadow87qft said:
I currently have a similar problem. successfully installed twrp and booted into recovery to see if it works. It did. so now i got the magisk install zip and wanted to install it via twrp, but after executing adb reboot recovery my phone now is stuck on the bootloader unlocked warning screen. The phone doesnt react to any input and doesnt connect to adb or fastboot. currently waiting for the battery to die and try with a fresh reboot after that...
Click to expand...
Click to collapse
For me, i found that fastboot was being exposed for a few seconds when it would start to turn back on after the battery dying out. I was able to send 'fastboot reboot recovery' and it didn't boot into recovery, but it booted into Android... A bit strange.

Related

[Q] Soft/Hard Bricked, Lost Root, Lost Recovery, USB Not Recognized

Hi all, this is a last ditched effort at maybe saving my phone. I did an update on my SU and for some unknown reason it rebooted my phone. It then loaded up my rom until the kernel settings loaded then rebooted once again. I then tried to go into recovery to flash a backup and it booted me straight into my unlocked fastboot. I then tried to reboot once again in hopes I could fast navigate into twrp through rom manager, once in I was prompted that I no longer had root. I then decided to start over from scratch and load a recovery in fastboot. Once I had everything good to go I plugged everything in and instead of recognizing my phone as a drive, HTC manager popped up instead. I then updated my drivers to see if maybe that would fix the problem with no luck. I am at a loss at this point. I would greatly appreciate any help you guys can offer.
grimzen said:
Hi all, this is a last ditched effort at maybe saving my phone. I did an update on my SU and for some unknown reason it rebooted my phone. It then loaded up my rom until the kernel settings loaded then rebooted once again. This is completely normal, you should have just rebooted the phone and been done I then tried to go into recovery to flash a backup and it booted me straight into my unlocked fastboot. Again totally normal, thats the bootloader use the vol to move down and choose recovery and hit power this will boot you to TWRP I then tried to reboot once again in hopes I could fast navigate into twrp through rom manager, once in I was prompted that I no longer had root. I then decided to start over from scratch and load a recovery in fastboot. Why ? Once I had everything good to go I plugged everything in and instead of recognizing my phone as a drive, HTC manager popped up instead. You should not have Sync installed only the drivers I then updated my drivers to see if maybe that would fix the problem with no luck. I am at a loss at this point. I would greatly appreciate any help you guys can offer.
Click to expand...
Click to collapse
Is the whole point of this just to install SuperSU ?
does your phone still boot up ? at one point you mention using rom manager ?
clsA said:
Is the whole point of this just to install SuperSU ?
does your phone still boot up ? at one point you mention using rom manager ?
Click to expand...
Click to collapse
I was doing a SU update. It restarted into a loop that boots about 1 min after the splash screen then resets. I've tried to redownload root through SU app as I can no longer connect through usb but it reboots to soon. I used Rom Manager to try and get into recovery as a second alternative.
grimzen said:
I was doing a SU update. It restarted into a loop that boots about 1 min after the splash screen then resets. I've tried to redownload root through SU app as I can no longer connect through usb but it reboots to soon. I used Rom Manager to try and get into recovery as a second alternative.
Click to expand...
Click to collapse
http://download.chainfire.eu/372/SuperSU/UPDATE-SuperSU-v1.86.zip
flash in recovery
use adb push UPDATE-SuperSU-v1.86.zip /data/media/0
to get the file on the phone
Reboot to bootloader / fastboot USB
and from command line on pc
fastboot erase cache
fastboot reboot
I cant understand why people using those ROm manager apps to install stuff. And you said it rebooted after you update your SU. Then i tink you pressed reboot into recovery instead of NORMAL. Am i wrong?
clsA said:
Is the whole point of this just to install SuperSU ?
does your phone still boot up ? at one point you mention using rom manager ?
Click to expand...
Click to collapse
bihslk said:
I cant understand why people using those ROm manager apps to install stuff. And you said it rebooted after you update your SU. Then i tink you pressed reboot into recovery instead of NORMAL. Am i wrong?
Click to expand...
Click to collapse
I no longer have a recovery to be able to flash anything. When I try to load into recovery it just boots right back into fastboot. I was just using rom manager to boot into recovery after I couldn't get into recovery through fastboot, not to flash anything. I was updating Super Su through the actual app itself. it seemed to be downloading something when it rebooted itself and I lost root, recovery and the ability to connect to my computer.
grimzen said:
I no longer have a recovery to be able to flash anything. When I try to load into recovery it just boots right back into fastboot. I was just using rom manager to boot into recovery after I couldn't get into recovery through fastboot, not to flash anything. I was updating Super Su through the actual app itself. it seemed to be downloading something when it rebooted itself and I lost root, recovery and the ability to connect to my computer.
Click to expand...
Click to collapse
I have updated SuperSU many times and never got any problem so there is something you did. Are you on custom or stock rom?
Are you s-off / unlocked bootloader?
bihslk said:
I have updated SuperSU many times and never got any problem so there is something you did. Are you on custom or stock rom?
Are you s-off / unlocked bootloader?
Click to expand...
Click to collapse
My bootloader is unlocked and i'm running Viperrom. I've never gone through the process of s-off but for some reason it says it at the top of my fastboot screen...not sure if that's normal or not.
grimzen said:
My bootloader is unlocked and i'm running Viperrom. I've never gone through the process of s-off but for some reason it says it at the top of my fastboot screen...not sure if that's normal or not.
Click to expand...
Click to collapse
Ok. I think you need to reflash recovery again.
Boot into bootloader and fastboot usb
then download TWRP recovery from here http://techerrata.com/browse/twrp2/m7 and pick 2.6.3.3-m7.img
put it into your fastboot folder and flash it "fastboot flash recovery openrecovery-twrp-2.6.3.3-m7.img and hit enter
now try to reboot into recovery. When there Wipe Dalvik and Cache and reboot. If recovery ask you to root your device then accept it and reboot.
Remember to connect phone to right USB port not 3.0. Use 2.0 port and try annother cable also.
bihslk said:
Ok. I think you need to reflash recovery again.
Boot into bootloader and fastboot usb
then download TWRP recovery from here http://techerrata.com/browse/twrp2/m7 and pick 2.6.3.3-m7.img
put it into your fastboot folder and flash it "fastboot flash recovery openrecovery-twrp-2.6.3.3-m7.img and hit enter
now try to reboot into recovery. When there Wipe Dalvik and Cache and reboot. If recovery ask you to root your device then accept it and reboot.
Remember to connect phone to right USB port not 3.0. Use 2.0 port and try annother cable also.
Click to expand...
Click to collapse
I've tried a few different cords and all 3 ports I have still nothing but the HTC manager thing. It will recognize it but only for a split second while booting up but it says HTC BUTTERFLY as the drive and i'm not sure if that's a problem or not but it won't recognize it at all through fastboot.
you cant boot up. if it doesnt recognize it in bootloader mode then i dont know.
Try restart PC. Maybe you have several adb at same time. Adn uninstall htc sync if not but keep drivers
bihslk said:
you cant boot up. if it doesnt recognize it in bootloader mode then i dont know.
Try restart PC. Maybe you have several adb at same time. Adn uninstall htc sync if not but keep drivers
Click to expand...
Click to collapse
Ok will try that now. thanks so much for the help.
I hadthe same problem after flashing a kernel. I repeatedly tried the bootloader (audiodown key + power button) until it started. Recovery was not available, in the red triangle screen press audio up key,got the system recovery screen, wipe cache, reboot the system and then try installing Twrp recovery. It worked.
Sent from my HTC One using xda app-developers app
jpaulpra said:
I hadthe same problem after flashing a kernel. I repeatedly tried the bootloader (audiodown key + power button) until it started. Recovery was not available, in the red triangle screen press audio up key,got the system recovery screen, wipe cache, reboot the system and then try installing Twrp recovery. It worked.
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
I'm not familiar with the red triangle screen is there a way to boot into it?
Grizmen what are you talking about. Why should you boot into red triangle? There is no menu called red triangle. Only on stock recovery.
Sent from my HTC One using Tapatalk
grimzen said:
I'm not familiar with the red triangle screen is there a way to boot into it?
Click to expand...
Click to collapse
bihslk said:
Grizmen what are you talking about. Why should you boot into red triangle? There is no menu called red triangle. Only on stock recovery.
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
I think @jpaulpra was telling him to reflash stock recovery
then boot to it and do clear cache.. then reflash twrp
When I got into bootloader, I lost the Twrp recovery. So when I selected recovery I got the screen with a "triangle and exclamation mark". If you leave it will reboot the system after couple of minutes. But if the audio up key is pressed, it will show a system recovery screen, where cache can be wiped
Sent from my LT26i using Tapatalk
bihslk said:
Grizmen what are you talking about. Why should you boot into red triangle? There is no menu called red triangle. Only on stock recovery.
Sent from my HTC One using Tapatalk
Click to expand...
Click to collapse
Basically all I'm trying to do now it's find a way to get my computer to recognize my phone as a drive. When I go into viper settings and go to advance menu (with the short time I have before boot loop) there is an option to mount drive. When I select the option to do so it hands on splash screen and I have to hold power button to recycle back on. Once back in it's no longer selected. I've never seen a boot loop go pay the flash screen. Is this normal?
Pretty SOL with my son's Nabi2
I'm having a issue with my sons Nabi2 pretty similar. I messed up bigtime guys I rooted it and started messing aroung with the system files. Then didn't get a boot afterwards, wiped everything from twrps system, data, the whole shabang! Even lost my root! and access to on board flash cause I've been trying to recover using twrp with absolutley no luck. I still have the original stock unrooted backup saved to my pc from when I first installed twrp. Can someone please help me? I'm really out here trying to reach out for some help. didn't even know where to post this. Thank you guys. Note to moderators: If this is the wrong place to post this then please point me to the right direction and I apologize.

[Q&A] [RECOVERY] TWP 2.7.1.0 for One Mini 2

Q&A for [RECOVERY] TWP 2.7.1.0 for One Mini 2
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer.
Before posting, please use the forum search and read through the discussion thread for [RECOVERY] TWP 2.7.1.0 for One Mini 2. If you can't find an answer, post it here, being sure to give as much information as possible (firmware version, steps to reproduce, logcat if available) so that you can get help.
Thanks for understanding and for helping to keep XDA neat and tidy!
new twrp's won't work
Hi there,
I just tried to root my htc mini 2 with and it says that it is tampered now and I can't reboot my recovery. So I tried the newest twrp and some in between because I've read in this forum that somebody had the same problem and he just got the newest twrp but that didn't work for me at all.
Is there any way to undo the whole thing by replacing the twrp with the original one or do I have to wait till there is gonna be a root for the htc mini 2?
When I try to recover everything it says that this build is for development purpose only...
Does somebody have an idea?
I would appreciate it a lot if somebody has an idea.
Hornochse7958 said:
Hi there,
I just tried to root my htc mini 2 with and it says that it is tampered now and I can't reboot my recovery. So I tried the newest twrp and some in between because I've read in this forum that somebody had the same problem and he just got the newest twrp but that didn't work for me at all.
Is there any way to undo the whole thing by replacing the twrp with the original one or do I have to wait till there is gonna be a root for the htc mini 2?
When I try to recover everything it says that this build is for development purpose only...
Does somebody have an idea?
I would appreciate it a lot if somebody has an idea.
Click to expand...
Click to collapse
When the bootloader says "tempered" means that it was unlocked. when you see " this build is for development purpose only" its referring to TWRP because you now using a custom recovery. Not sure the nature of your problem but to undo, simply boot into boot loader and flash original recovery.img you can find in the forum.
I can't you open TWRP?
kativiti said:
When the bootloader says "tempered" means that it was unlocked. when you see " this build is for development purpose only" its referring to TWRP because you now using a custom recovery. Not sure the nature of your problem but to undo, simply boot into boot loader and flash original recovery.img you can find in the forum.
I can't you open TWRP?
Click to expand...
Click to collapse
Thank you for the quick respond and I wanted to try and undo everything but no my problem is that my phone completely froze in the twrp screen. I can't do anything, I can't unlock it nor shut down my phone or start the bootloader... that kind of sucks. Any suggestions now? Is it possible to open the htc one mini 2 and take out the battery? or do I have to wait till it runs out by it self and than start it again?
Hornochse7958 said:
Thank you for the quick respond and I wanted to try and undo everything but no my problem is that my phone completely froze in the twrp screen. I can't do anything, I can't unlock it nor shut down my phone or start the bootloader... that kind of sucks. Any suggestions now? Is it possible to open the htc one mini 2 and take out the battery? or do I have to wait till it runs out by it self and than start it again?
Click to expand...
Click to collapse
Read this tread. Someone had the same problem
http://forum.xda-developers.com/one-mini-2/help/rooting-htc-one-mini-2-t2880936
Unresponsive after boot up from dead battery
THanks to U-ra I get the enjoy my fav DSP Viper!!!
Cheers Man,
I have a small niggling problem that I can't work out, My battery tends to die alot, once I place the phone on charge after a flat battery, the phone auto boots to Twp, I am really cool with that but the annoying thing is buttons and screen are unresponsive? I can't do a thing, just have the Twp menu. The power of button does turn the screen off/on but thats its. Tried doing factory resets, reboots holding down power, vol buttons. Just nothing.
only way around it is to use adb and reboot command.
Is anyone else experiencing this problem.
http://forum.xda-developers.com/one...recovery-twp-2-7-1-0-one-mini-2-t2801370/page 4 here's the answer, so far
@u-ra is there any clue about getting official twrp support? (I was thinking about that problem of the self-booting recovery when phone is off and plugged in)
gibihr said:
@u-ra is there any clue about getting official twrp support? (I was thinking about that problem of the self-booting recovery when phone is off and plugged in)
Click to expand...
Click to collapse
I'll try to get to it this weekend.
HELP TWRP stuck at swipe to unlock
Hello all,
for unknown reason the phone restarded and now is stuck at swipe to unlock but it is not working. I try to hold power+volume down, but no way to turn it off. What can I do?
Thanks in advance
PS: well, it restarted... I don't know what happend but now it's ok
sorry for sounding like a newb
i have the verizon htc one remix, which i believe is the same as the one mini 2 . will this work on it?
akubenz said:
i have the verizon htc one remix, which i believe is the same as the one mini 2 . will this work on it?
Click to expand...
Click to collapse
you can try but i think someone here couldn't unlock bootloader trough HTC Dev.
Help: Stock rom updated between boots, TWRP non responsive, fastboot doesnt recognise
Hello to anyone that can help or in a similar situation,
Have brand new HTC one mini 2, rooted. Am trying to install cyanogenmod and followed the instructions on their page. All went well and was ready to flash the rom from TWRP. Decided to do a backup to SD first and then apply super user. Forced to reboot and accidentally let it boot to android (stock rom). Didnt notice the last time i had it booted wifi downloaded a system update which was automatically applied next time i booted into the stock rom after backup and Superuser in TWRP. Rebooted to recovery (TWRP) as soon as i could, but TWRP is no longer responding to touch. I realise i have probably updated the phone to a point where TWRP is no longer working, and i have to use something else to flash my rom. Am trying to flash an updated TWRP or Clockworkmod recovery, but fastboot/adb no longer recognise the device when booted into the stock rom, and when i boot into TWRP (non-responsive) it also doesnt recognise the device attached, even if i catch it before the screen goes black from inactivity. Any suggestions greatly appreciated....
snorglamp said:
Hello to anyone that can help or in a similar situation,
Have brand new HTC one mini 2, rooted. Am trying to install cyanogenmod and followed the instructions on their page. All went well and was ready to flash the rom from TWRP. Decided to do a backup to SD first and then apply super user. Forced to reboot and accidentally let it boot to android (stock rom). Didnt notice the last time i had it booted wifi downloaded a system update which was automatically applied next time i booted into the stock rom after backup and Superuser in TWRP. Rebooted to recovery (TWRP) as soon as i could, but TWRP is no longer responding to touch. I realise i have probably updated the phone to a point where TWRP is no longer working, and i have to use something else to flash my rom. Am trying to flash an updated TWRP or Clockworkmod recovery, but fastboot/adb no longer recognise the device when booted into the stock rom, and when i boot into TWRP (non-responsive) it also doesnt recognise the device attached, even if i catch it before the screen goes black from inactivity. Any suggestions greatly appreciated....
Click to expand...
Click to collapse
A kind member replied to me in another post indicating that fastboot commands only work in the bootloader, and that adb commands only work in TWRP which is why I am having problems re-flashing TWRP (requiring the "fastboot flash recovery TWRP.img" command). However I thought TWRP replaced the bootloader, so I seem to be locked out of re-flashing TWRP because i have TWRP. This seems not to make a lot of sense, can anyone else confirm or otherwise explain what I have misunderstood about that? As stated neither adb nor fastboot recognises the device is attached to the computer any more, so commands are not executing...
snorglamp said:
Hello to anyone that can help or in a similar situation,
Have brand new HTC one mini 2, rooted. Am trying to install cyanogenmod and followed the instructions on their page. All went well and was ready to flash the rom from TWRP. Decided to do a backup to SD first and then apply super user. Forced to reboot and accidentally let it boot to android (stock rom). Didnt notice the last time i had it booted wifi downloaded a system update which was automatically applied next time i booted into the stock rom after backup and Superuser in TWRP. Rebooted to recovery (TWRP) as soon as i could, but TWRP is no longer responding to touch. I realise i have probably updated the phone to a point where TWRP is no longer working, and i have to use something else to flash my rom. Am trying to flash an updated TWRP or Clockworkmod recovery, but fastboot/adb no longer recognise the device when booted into the stock rom, and when i boot into TWRP (non-responsive) it also doesnt recognise the device attached, even if i catch it before the screen goes black from inactivity. Any suggestions greatly appreciated....
Click to expand...
Click to collapse
I think I have found the solution for myself: I went back into the stock rom and did a factory reset (from within android booted up as normal), which after completion rebooted me into TWRP which now works fine (is responding to touch again, and i can flash the Cyanogen image now). Hopefully this helps someone else in this situation one day, or maybe I am the only idiot that needed to ask hehe. I should clarify that after flashing TWRP I lost access to the fastboot screen and could not push anything over ADB or fastboot commands from windows (plugged in via USB). Holding down volume down and power booted directly into TWRP, and i had no way to get to fastboot screen. After doing factory resent from within the Android OS, holding volume down and power booted me to the fastboot screen, and only when I selected "Recovery" did it take me to TWRP, and I was again able to run fastboot and ADB commands from PC. Weird (or maybe not if you know more than me), but there it is...
snorglamp said:
A kind member replied to me in another post indicating that fastboot commands only work in the bootloader, and that adb commands only work in TWRP which is why I am having problems re-flashing TWRP (requiring the "fastboot flash recovery TWRP.img" command). However I thought TWRP replaced the bootloader, so I seem to be locked out of re-flashing TWRP because i have TWRP. This seems not to make a lot of sense, can anyone else confirm or otherwise explain what I have misunderstood about that? As stated neither adb nor fastboot recognises the device is attached to the computer any more, so commands are not executing...
Click to expand...
Click to collapse
Sorry, but it seems to me that you don't know the difference between bootloader and recovery. I apologize if you do. If not, search in CM wikis or ask here for explanations.
corbeau56 said:
Sorry, but it seems to me that you don't know the difference between bootloader and recovery. I apologize if you do. If not, search in CM wikis or ask here for explanations.
Click to expand...
Click to collapse
I do indeed know the difference between the bootloader and recovery, its just that the bootloader (Hboot) was not longer accessible in my situation and TWRP (the recovery) was imposing itself when you would normally expect to find the bootloader (i.e. my bootloader was for all intents and purposes replaced by my recovery, while I am sure this is not true in fact, it was in effect). As I say, doing a factory reset from within the OS restored the bootloader (HBoot) and I was able to continue modding. I am today extremely happy with my fully secured cyanogenmodded HTC One Mini 2 via TWRP recovery method. I hope that is somewhat clearer.
Can you enter bootliader now? I got stuck in a bootloop once and couldn't enter bootloader because I continued pressing power and Volume down like I did on my One S. For Mini 2, we have to hold the Volume UP and Power buttons until HBOOT appears, then release the buttons.
corbeau56 said:
Can you enter bootliader now? I got stuck in a bootloop once and couldn't enter bootloader because I continued pressing power and Volume down like I did on my One S. For Mini 2, we have to hold the Volume UP and Power buttons until HBOOT appears, then release the buttons.
Click to expand...
Click to collapse
That may well have been an alternative solution to my problem, however it was fixed by the factory reset and volume down and power then took me to HBoot (this would appear to contradict what you have said above, but maybe volume down and power does different things depending on how what you have done to the phone, not sure), so I cannot confirm whether or not that also would have worked for me. Good suggestion though, especially if you are not in a position to do a factory reset. and it would certainly be easier if it worked...I am convinced my problem was the result of a conflict between the TWRP version i installed (downloaded from here) and the android update that occurred between boots.
I am indeed able to get into bootloader/hboot and successfully flashed cyanogenmod from TWRP. I can confirm post flashing TWRP and Cyanogenmod, holding volume down and power takes me to HBoot (and then the option to go to fastboot or recovery).
Holding power up and power just loads cyanogenmod for me now as if I had just pressed power.
I thought I should confirm whether or not holding volume up vs volume down with power results in bootloader vs recovery loading. For me, they both took me to TWRP.
Also, TWRP doesnt seem to work on HTC One Mini 2 after you do anything to set up your phone. It just doesnt recognise touch input any more so you cant do anything with it. However the fix i noted earlier (factory reset) even works with other roms installed, confirmed for cyanogenmod 11 and 12 nightlies as at the date of this post. After factory reset TWRP works again, but if you go through the setup steps and start installing apps, TWRP goes unresponsive again. I hope we might get an official TWRP update soon!

[Q] Stuck in bootloop after attempted upgrade

I just recently got my TF701T. I unlocked the boot loader with the Asus unlock tool and then attempted to upgrade to version 11.4.1.17 so that I could install Cromi-X 7 on it. I placed the file UL-K00C-US-11.4.1.17-user.zip on the root of the tablet and rebooted. Once the OS booted back up I was alerted that an update file had been found and I clicked it to begin installing.
The tablet rebooted and appeared to be upgrading but now all I see is a robot on his back with a red exclamation point. After a while the tablet will reboot and again show the Asus splash screen and then the upgrading robot then immediately go to the robot on its back.
I can get to fastboot by pressing power and volume down. I see "the device is unlocked" at the top of the Asus splash screen then I see a screen with the following. Android macallan-user bootloader (1.00 e) released by "US_epad-10.14.1.47-20131022" Choosing RCK, Android or Wipe Data do nothing to help the situation.
I thought I had found a solution in this thread http://forum.xda-developers.com/showpost.php?p=47933481&postcount=1 but the link for drgravy's recovery.img is not working.
I would appreciate any help recovering this tablet. Thank you.
jggrnaut said:
I just recently got my TF701T. I unlocked the boot loader with the Asus unlock tool and then attempted to upgrade to version 11.4.1.17 so that I could install Cromi-X 7 on it. I placed the file UL-K00C-US-11.4.1.17-user.zip on the root of the tablet and rebooted. Once the OS booted back up I was alerted that an update file had been found and I clicked it to begin installing.
The tablet rebooted and appeared to be upgrading but now all I see is a robot on his back with a red exclamation point. After a while the tablet will reboot and again show the Asus splash screen and then the upgrading robot then immediately go to the robot on its back.
I can get to fastboot by pressing power and volume down. I see "the device is unlocked" at the top of the Asus splash screen then I see a screen with the following. Android macallan-user bootloader (1.00 e) released by "US_epad-10.14.1.47-20131022" Choosing RCK, Android or Wipe Data do nothing to help the situation.
I thought I had found a solution in this thread http://forum.xda-developers.com/showpost.php?p=47933481&postcount=1 but the link for drgravy's recovery.img is not working.
I would appreciate any help recovering this tablet. Thank you.
Click to expand...
Click to collapse
Do you have the Asus drivers and adb/fastboot installed on your PC?
If you have fastboot access, it would be as easy as:
Download CWM 6.0.4.7 from here http://droidbasement.com/db-blog/?p=3207
I know it says you have to be on 10.26.1.18 for this, but since you will use it only to flash the latest bootloader, you should be fine.
Put the recovery.img into your fastboot folder and flash it (if you need help here, let me know).
Then fastboot reboot
Your tablet should boot up normally now
Part 2:
Head here http://forum.xda-developers.com/transformer-tf701/development/rom-nov-24-t2951032 and grab the 11.4.1.27 bootloader/CWM 6.0.5.1 package
Flash it in your existing CWM
Reboot
Part 3:
Boot to recovery
Make a nandroid of your stock rom
Go back to home
Wipe data, cache and Dalvik
Flash the rom (which you have loaded onto your microSD)
All done.
Don't forget to delete the (probably corrupted) firmware file
EDIT: BTW, when you reboot to system from CWM you will always get the question if you want to fix root. Choose NO - it's a bug....
berndblb said:
Do you have the Asus drivers and adb/fastboot installed on your PC?
If you have fastboot access, it would be as easy as:
Download CWM 6.0.4.7 from here http://droidbasement.com/db-blog/?p=3207
I know it says you have to be on 10.26.1.18 for this, but since you will use it only to flash the latest bootloader, you should be fine.
Put the recovery.img into your fastboot folder and flash it (if you need help here, let me know).
Then fastboot reboot
Your tablet should boot up normally now
Part 2:
Head here http://forum.xda-developers.com/transformer-tf701/development/rom-nov-24-t2951032 and grab the 11.4.1.27 bootloader/CWM 6.0.5.1 package
Flash it in your existing CWM
Reboot
Part 3:
Boot to recovery
Make a nandroid of your stock rom
Go back to home
Wipe data, cache and Dalvik
Flash the rom (which you have loaded onto your microSD)
All done.
Don't forget to delete the (probably corrupted) firmware file
EDIT: BTW, when you reboot to system from CWM you will always get the question if you want to fix root. Choose NO - it's a bug....
Click to expand...
Click to collapse
Thanks for the reply. I do have the drivers and adb/fastboot setup on PC.
After I could not find anywhere to download the version of CWM that was supposed to be for my firmware version I was afraid to proceed.
When I get home I will try the steps you have listed above and report back how it turned out.
One question, In part one after I flash recovery CWM 6.0.4.7 do I reboot to recovery or let the tablet reboot to the OS?
jggrnaut said:
Thanks for the reply. I do have the drivers and adb/fastboot setup on PC.
After I could not find anywhere to download the version of CWM that was supposed to be for my firmware version I was afraid to proceed.
When I get home I will try the steps you have listed above and report back how it turned out.
One question, In part one after I flash recovery CWM 6.0.4.7 do I reboot to recovery or let the tablet reboot to the OS?
Click to expand...
Click to collapse
Shouldn't matter. When you flash recovery or bootloader, you flash it to the staging partition. The actual installation happens during the next boot - you'll see a brief blue progress bar under the Asus logo.
Booting a recovery for the first time I always reboot to system after the flash, then power down and enter the new recovery from the bootloader. Probably booting straight to recovery or bootloader is ok, but I have not tested it.
berndblb said:
Shouldn't matter. When you flash recovery or bootloader, you flash it to the staging partition. The actual installation happens during the next boot - you'll see a brief blue progress bar under the Asus logo.
Booting a recovery for the first time I always reboot to system after the flash, then power down and enter the new recovery from the bootloader. Probably booting straight to recovery or bootloader is ok, but I have not tested it.
Click to expand...
Click to collapse
Well it has gotten worse and I think I have lost fastboot now. I downloaded the CWM from part 1 above and flashed it in fastboot. I typed fastboot reboot and now I am stuck in a bootloop still. It says "The device is unlocked" at top of Asus splash screen for about 15 seconds, screen turns black and the goes back to Asus splash screen.
I tried holding power and volume key to get back to fastboot but no luck. Any ideas?
Wow! You are really having some bad luck there!!
First the failed firmware update and now this.... Please post the commands you used to flash CWM.
I have no explanantion for this since you did not even boot into CWM.......
Unless..... the bad firmware flash left a command behind calling the stock recovery to do something (which in your case did not work anyway since it just looped) and now the bootloader tries to execute the command which is not "understood" by CWM. But that still does not explain why you cannot boot into the BL anymore......
Can you turn it off by long pressing power? Try every which way to get into fastboot. Without it there is not much you can do I'm afraid.
Try the restart pin hole (I believe it's on the left side of the tablet near the top) in conjunction with Volume Down, try leaving it alone for a while, try timing the button press somewhat differently - anything to get you into the BL again...
I feel very sorry for you, mate!!
Thanks for helping even if it didnt turn out great.
I typed fastboot flash recovery recovery.img after I had downloaded 6.0.4.5 and put it in my fastboot folder. I got confirmation that it transferred successfully.
Then fastboot reboot The tablet rebooted but still would not boot into OS. It still boot looped but did not show the dead android icon anymore.
I got back into fastboot and selected RCK but it would not boot into recovery. Finally I got back into fastboot and selected wipe data and that is what got me to current situation. Now the only thing I get is when I long press power and volume up my PC picks up an unknown device that says apx.
jggrnaut said:
Thanks for helping even if it didnt turn out great.
I typed fastboot flash recovery recovery.img after I had downloaded 6.0.4.5 and put it in my fastboot folder. I got confirmation that it transferred successfully.
Then fastboot reboot The tablet rebooted but still would not boot into OS. It still boot looped but did not show the dead android icon anymore.
I got back into fastboot and selected RCK but it would not boot into recovery. Finally I got back into fastboot and selected wipe data and that is what got me to current situation. Now the only thing I get is when I long press power and volume up my PC picks up an unknown device that says apx.
Click to expand...
Click to collapse
I don't know what happened before - maybe you were doomed since the bad firmware flash - but that last step sealed the coffin.
Using Wipe Data from the bootloader with a custom recovery installed is asking for trouble. Never ever do that.... Sorry, it's a brick. [emoji24]

Moto E5 Play, unable to root

Unable to root Moto E5 play,
Steps:
1. In TWRP recovery, getting Unmodified system partition. So keeping read only have to Wipe -> format data. (As without this get mount /data error). This helps to now mound /data and sdcard is no longer 0MB.
2. After formatting data, if I reboot device I get message Decryption Unsuccessful.
If I do not reboot and continue in TWRP to install Magisk:
2. After the step 1, go back to Install and install zip no-verity-opt-encrypt-6.0.zip.Now reboot to recovery the Unmodified partition message no longer appears.
3. From sdcard or Micro SD flash Magisk. I had to flash Magisk-v19.3.zip as all other gave me updater error 1.
4. Once magisk is installed, reboot system.
5. Stuck on Moto boot screen forever.
About phone says, Model E5 play, Android 8.1.0 but can't use official James Twrp, had to use version TWRP 3.2.0 to make TWRP work.
Any help would be appreciated.
JTZT said:
Unable to root Moto E5 play,
Steps:
1. In TWRP recovery, getting Unmodified system partition. So keeping read only have to Wipe -> format data. (As without this get mount /data error). This helps to now mound /data and sdcard is no longer 0MB.
2. After formatting data, if I reboot device I get message Decryption Unsuccessful.
If I do not reboot and continue in TWRP to install Magisk:
2. After the step 1, go back to Install and install zip no-verity-opt-encrypt-6.0.zip.Now reboot to recovery the Unmodified partition message no longer appears.
3. From sdcard or Micro SD flash Magisk. I had to flash Magisk-v19.3.zip as all other gave me updater error 1.
4. Once magisk is installed, reboot system.
5. Stuck on Moto boot screen forever.
About phone says, Model E5 play, Android 8.1.0 but can't use official James Twrp, had to use version TWRP 3.2.0 to make TWRP work.
Any help would be appreciated.
Click to expand...
Click to collapse
yo you figure your phone out?? i had did the same thing on mine. i successfully unlocked to bootloader and installed twrp before i erased my entire OS, took all day to fix it. i had to find to stock firmware online and then flash it over. now im tryna mess it up again with a full root hahaha
Sayitainttone88 said:
yo you figure your phone out?? i had did the same thing on mine. i successfully unlocked to bootloader and installed twrp before i erased my entire OS, took all day to fix it. i had to find to stock firmware online and then flash it over. now im tryna mess it up again with a full root hahaha
Click to expand...
Click to collapse
exactly where you are.. Can't manage to root the device
Have you tried this guide https://forum.xda-developers.com/moto-e5/how-to/guide-root-twrp-moto-e5-play-explained-t3856182 ive managed to get root on my james device and Lineage 15.1 running on it.
JTZT said:
exactly where you are.. Can't manage to root the device
Click to expand...
Click to collapse
aYo bossman....you figure it out? after idk how many hours/days working on this and a few firmware resets I FINALLY got a successful root!! I'm on the e5 play James XT1921-3 for MetroPCS. After trying prolly every guide in the forums this is the one I had success with.
https://forum.xda-developers.com/moto-e5/how-to/guide-root-twrp-moto-e5-play-explained-t3856182/amp/
Also, after awhile I had different versions of every every img or zip file which didn't help none. In the end I used magisk-v19.4.zip which I got from the actual site, and the same for the twrp_james.img. make sure to extract the fstab.qcom file as well. That was my problem for a cool minute. And the last thing, which I don't think I read here but on the actual site was I installed Magisk Manager on my phone before even booting into fastboot. Keep in mind I did this all on my girlfriends MacBook air and I'm nowhere near a pro. I was just tweaking (literally-smoking m***) on the thing until I got it rite. If you get stuck in loops check out this program rsdlite which works! And if your phone ever freezes and doesn't loop but stays stuck on the Moto screen, hold the vol up button for a few seconds, followed by the vol down and power button, pressing all 3 at the same time, hold it and eventually it'll pop back into fastboot. Good luck and let me know!!
Sayitainttone88 said:
aYo bossman....you figure it out? after idk how many hours/days working on this and a few firmware resets I FINALLY got a successful root!! I'm on the e5 play James XT1921-3 for MetroPCS. After trying prolly every guide in the forums this is the one I had success with.
https://forum.xda-developers.com/moto-e5/how-to/guide-root-twrp-moto-e5-play-explained-t3856182/amp/
Also, after awhile I had different versions of every every img or zip file which didn't help none. In the end I used magisk-v19.4.zip which I got from the actual site, and the same for the twrp_james.img. make sure to extract the fstab.qcom file as well. That was my problem for a cool minute. And the last thing, which I don't think I read here but on the actual site was I installed Magisk Manager on my phone before even booting into fastboot. Keep in mind I did this all on my girlfriends MacBook air and I'm nowhere near a pro. I was just tweaking (literally-smoking m***) on the thing until I got it rite. If you get stuck in loops check out this program rsdlite which works! And if your phone ever freezes and doesn't loop but stays stuck on the Moto screen, hold the vol up button for a few seconds, followed by the vol down and power button, pressing all 3 at the same time, hold it and eventually it'll pop back into fastboot. Good luck and let me know!!
Click to expand...
Click to collapse
Tried the steps exactly the same, the phone reboots but I get the message Decryption Unsuccessful -> Reset Phone
keifus.rahn said:
Have you tried this guide https://forum.xda-developers.com/moto-e5/how-to/guide-root-twrp-moto-e5-play-explained-t3856182 ive managed to get root on my james device and Lineage 15.1 running on it.
Click to expand...
Click to collapse
How are you able to get lineage on there? I've tried everything and all I end up with when I try to start my phone is a flashing screen. I'd love to know if you'd be willing to help a newbie out?

Question Redmi Note 10 Pro Bootloop

Using crDroid 7.16 (Android 11) and TWRP 3.6.1_11 (twrp-3.6.1_11-0-sweet), unlocked of course, and rooted with Magisk v25.1, the phone suddenly entered a boot loop.
It will show the Redmi logo, then the CrDroid boot sequence, and then restart.
It is NOT possible to enter recovery, it will show the TWRP screen, and then just do nothing (not even reboot)
It is NOT possible to turn it off, it will just reboot no matter how long the power button is pressed
It IS possible to enter Fastboot
I have tried removing the SIM, no changes. Tried fastboot commands, to boot directly into TWRP (3.6.1, and 3.6.2) or flash a new TWRP - nothing works. Still bootloop, still can't turn it off, still not possible to go into TWRP.
Hoping for any ideas, I'm clueless.
J.PG said:
Using crDroid 7.16 (Android 11) and TWRP 3.6.1_11 (twrp-3.6.1_11-0-sweet), unlocked of course, and rooted with Magisk v25.1, the phone suddenly entered a boot loop.
It will show the Redmi logo, then the CrDroid boot sequence, and then restart.
It is NOT possible to enter recovery, it will show the TWRP screen, and then just do nothing (not even reboot)
It is NOT possible to turn it off, it will just reboot no matter how long the power button is pressed
It IS possible to enter Fastboot
I have tried removing the SIM, no changes. Tried fastboot commands, to boot directly into TWRP (3.6.1, and 3.6.2) or flash a new TWRP - nothing works. Still bootloop, still can't turn it off, still not possible to go into TWRP.
Hoping for any ideas, I'm clueless.
Click to expand...
Click to collapse
Try to flash newest orange fox recovery 12.1 or TWRP via PC again and reboot in it via hardware keys. Then format data with yes and reboot recovery. Flash ROM . Reboot system. Flash magisk after first Boot.
Laptapper said:
Try to flash newest orange fox recovery 12.1 or TWRP via PC again and reboot in it via hardware keys. Then format data with yes and reboot recovery. Flash ROM . Reboot system. Flash magisk after first Boot.
Click to expand...
Click to collapse
Thank you - tried it with Orangefox, directly booting and flashing, but the same issue as with TWRP - it shows the logo screen, and then just stops and does nothing for at least a few minutes.
I feel like the phone is having trouble decrypting or even accessing any of the data?
At this point I think there might not be a way to fix it without losing any data?
And even full wiping and flashing a stock ROM seems difficult, since I can't access recovery at all.
J.PG said:
Thank you - tried it with Orangefox, directly booting and flashing, but the same issue as with TWRP - it shows the logo screen, and then just stops and does nothing for at least a few minutes.
I feel like the phone is having trouble decrypting or even accessing any of the data?
At this point I think there might not be a way to fix it without losing any data?
And even full wiping and flashing a stock ROM seems difficult, since I can't access recovery at all.
Click to expand...
Click to collapse
I've told you to format data with yes. No other way.
Of course you loose every data
just encourage yourself until you execute
fastboot -w
Laptapper said:
I've told you to format data with yes. No other way.
Of course you loose every data
Click to expand...
Click to collapse
Alright. The problem is, that I can't get into the recovery, not with booting into it directly from fastboot, or flashing any other TWRP or Orangefox version and using hardware keys. It just won't load.
So seems like "fastboot -w" is the best option.

Categories

Resources