It is possible to update the equipment with Android 9 with the signed firmware (Huawei Finder) and with the bootloader blocked, my device is a VTR-L29C605B374 and as I have seen in FF there is an update with Anddoid 9 for my IMEI, but my P10 is not in any update
try throu HiCare! and yes you can with eRecovery just follow steps!
the-bomber said:
try throu HiCare! and yes you can with eRecovery just follow steps!
Click to expand...
Click to collapse
From Hicare, my phone is in the last Update, but in FFinder there is one Update to Android Pie, what steps should I follow to update the P10 manually, that is, download the files from FF and update locally or some method that does not need the open bootloader?
My phone has C605B374 (last official Update)
no you don't need unlocked bootloader. go to firmware finder click on ur firmware and check if its approved then click on eRecovery method and follow instructions
You can try this method here to update using Hisuite on the PC, along with Firmware Finder on your phone: https://forum.xda-developers.com/showpost.php?p=78850439&postcount=1334
Be sure to upgrade to B386 version first, before attempting to go to Pie, for best chance of success and lowest risk.
the-bomber said:
try throu HiCare! and yes you can with eRecovery just follow steps!
Click to expand...
Click to collapse
Thanks, Hisuite and method host working, my phone was updated to Android 9 from C605B374
how did you update please help us. thank you
NowLearn said:
how did you update please help us. thank you
Click to expand...
Click to collapse
Instructions how to get an authorized version of EMUI 9 on EMUI 9 via Firmware Finder
Attention, this method requires more success checks.
1. Add a line to C:\Windows\System32\drivers\etc\hosts
188.225.84.142 query.hicloud.com
2. Download and install HiSuite9.0.2.304, BUT NOT RUN:
3. Replace the files:
httpcomponent.dll move with the replacement in C:/Program Files (x86)/HiSuite or other directory in which the application is installed HiSuite
HiSuiteConfig.xml move with the replacement in C:/Users/YOURUSERNAME/AppData/Local/Hisuite/userdata/UpdateDogDev
4. Open FF (any, I like the smartphone to register - less action)
Looking for a permitted Android 9 for your device on the principle: device_model: VTR-L29 or VTR-L09,
NOTE: Firmware must be approved for your IMEI
Once again, make sure it is permitted, registers the update for eRecovery.
NOTE: There are two types of firmware: CHN, i.e. for Chinese devices and OVS, for all the rest. So if you do not have Chinese firmware, then you need to pay attention exclusively to OVS.
5. Run HiSuite, connect the device, looking for an update, update, enjoy.
NOTE: Follow the link and download archives
Necrodaemon said:
Instructions how to get an authorized version of EMUI 9 on EMUI 9 via Firmware Finder
Attention, this method requires more success checks.
1. Add a line to C:\Windows\System32\drivers\etc\hosts
188.225.84.142 query.hicloud.com
2. Download and install HiSuite9.0.2.304, BUT NOT RUN:
3. Replace the files:
httpcomponent.dll move with the replacement in C:/Program Files (x86)/HiSuite or other directory in which the application is installed HiSuite
HiSuiteConfig.xml move with the replacement in C:/Users/YOURUSERNAME/AppData/Local/Hisuite/userdata/UpdateDogDev
4. Open FF (any, I like the smartphone to register - less action)
Looking for a permitted Android 9 for your device on the principle: device_model: VTR-L29 or VTR-L09,
NOTE: Firmware must be approved for your IMEI
Once again, make sure it is permitted, registers the update for eRecovery.
NOTE: There are two types of firmware: CHN, i.e. for Chinese devices and OVS, for all the rest. So if you do not have Chinese firmware, then you need to pay attention exclusively to OVS.
5. Run HiSuite, connect the device, looking for an update, update, enjoy.
NOTE: Follow the link and download archives
Click to expand...
Click to collapse
I tried. It said failed to connect. I have a vtr-l09 c025. What version do your recommend for Latin America? Thank you
the-bomber said:
no you don't need unlocked bootloader. go to firmware finder click on ur firmware and check if its approved then click on eRecovery method and follow instructions
Click to expand...
Click to collapse
I just want to say thank you! This basic instruction was the clearest I found on the whole internet. :good: I have a VTR-L29C185 Huawei P10 that I needed to get recovered as it was failing. This worked 100% for me to get stock firmware on it and going.
I do have another question - is there a legit stock 9.0 firmware for this phone?
RubAnADUB said:
I just want to say thank you! This basic instruction was the clearest I found on the whole internet. :good: I have a VTR-L29C185 Huawei P10 that I needed to get recovered as it was failing. This worked 100% for me to get stock firmware on it and going.
I do have another question - is there a legit stock 9.0 firmware for this phone?
Click to expand...
Click to collapse
Yes, you can check on firmwarefinder and before installing hit the Check firmware availability! if it says Yes available for your device you can install it without any problem! :highfive:
have a goodday!
I see an update on HiCare,i'm clicking the check box but it says try later...i have vtrl09 version...
the-bomber said:
Yes, you can check on firmwarefinder and before installing hit the Check firmware availability! if it says Yes available for your device you can install it without any problem! :highfive:
have a goodday!
Click to expand...
Click to collapse
I found one that said it was yes on verify, but when I hit register for erecovery it just started loading the dang 8.0 one instead....
the-bomber said:
Yes, you can check on firmwarefinder and before installing hit the Check firmware availability! if it says Yes available for your device you can install it without any problem! :highfive:
have a goodday!
Click to expand...
Click to collapse
hi, i follow the instruction, but when i connect to erecover, with HISUITE, it gives me the error. what am i doing wrong? i added the ip to host table,thank you
I need help with these files. I downloaded 2 files from the firmware finder. then extracted them. I know they are supposed to go to a dload folder but I am confused on how to combine them?
https://www.getdroidtips.com/full-guide-install-stock-firmware-huawei-smartphone/
RubAnADUB said:
I just want to say thank you! This basic instruction was the clearest I found on the whole internet. :good: I have a VTR-L29C185 Huawei P10 that I needed to get recovered as it was failing. This worked 100% for me to get stock firmware on it and going.
I do have another question - is there a legit stock 9.0 firmware for this phone?
Click to expand...
Click to collapse
VTR-L29C185E3R1P9B159 (9.0.1.159)
VTR-L09C185E3R1P9B159 (9.0.1.159)
Now you must verify if it is approved for your IMEI and install using Hisuite
PD: Search firmware in FF .... VTR-L29CXXX (XXX = CUST)
NowLearn said:
I tried. It said failed to connect. I have a vtr-l09 c025. What version do your recommend for Latin America? Thank you
Click to expand...
Click to collapse
Verify changes in host, drivers USB, HDB in Phone (install and approved connection), then Firmware approved for you IMEI
Necrodaemon said:
Verify changes in host, drivers USB, HDB in Phone (install and approved connection), then Firmware approved for you IMEI
Click to expand...
Click to collapse
Me puedes aayudar porvor? sale error FAILED TO UPDATE, lo hice tal cual lo publicaste. No me llego la actualizacion que prometio huawei xd debe ser solo para los operadores clavistel solamente xd.
gracias de antemano.
Related
hey guys..
anyıone has succefully installed this fw to device..? B150..? twrp method is not working (if it is the correct way)
https://www.skyneel.com/huawei-p10-plus-b150-nougat
I get failed on any firmware although I have a p10 lite huawei have done something in EMUI5. 1 that requires authentication from server. My gripe is all these firmwares and beta that are out but we can't install
Use firmware finder from playstore to update,but the firmware need to be authorized to be install.
gm007 said:
Use firmware finder from playstore to update,but the firmware need to be authorized to be install.
Click to expand...
Click to collapse
hey..
i tried it but i am getting error while getting fw list.. it is connected to wifi..
"No connection to Firmware Finder server"
but the firmware need to be authorized to be install.
apk will authorized it or me..?
As i said EMUI5.1 security checks lol Huawei gggrrrrrr stop with the beta if we cant install
Hello, my P10 Plus is with the C109 cust, is there a way to upgrade it to C432 without unlock bootloader?
NewShield_ said:
Hello, my P10 Plus is with the C109 cust, is there a way to upgrade it to C432 without unlock bootloader?
Click to expand...
Click to collapse
No.
gm007 said:
No.
Click to expand...
Click to collapse
If I am in C109.. Will I receive EMUI 6?
MKD73 said:
I get failed on any firmware although I have a p10 lite huawei have done something in EMUI5. 1 that requires authentication from server. My gripe is all these firmwares and beta that are out but we can't install
Click to expand...
Click to collapse
Hello, can you give me the VKY_L09C109B100 please this is really important because I cannot find it at all
gm007 said:
Use firmware finder from playstore to update,but the firmware need to be authorized to be install.
Click to expand...
Click to collapse
When using firmware finder do I just download the update.zip? Or should I download thr other files also?
Guessphx said:
When using firmware finder do I just download the update.zip? Or should I download thr other files also?
Click to expand...
Click to collapse
Enable install via proxy in the settings and follow the instructions.
There is help in the application for how to.
gm007 said:
Enable install via proxy in the settings and follow the instructions.
There is help in the application for how to.
Click to expand...
Click to collapse
I tries this with no luck idk if I'm doing it correctly I'm following instructions but having no progress
Guessphx said:
I tries this with no luck idk if I'm doing it correctly I'm following instructions but having no progress
Click to expand...
Click to collapse
There is video tutorial in the instructions.
I have a Huawei P9 that doesn't seem to receive updates.
EMUI 4.1.1
Build: EVA-L09C900B182
Andriod: 6.0
I have tried using firmware finder but I always get checksum failed before it passes 1%.
I had a look through the Forums and it seems that people recommend rebranding though that was in 2017.
I was wondering if there is any easy way to update?
I am a noob so i want to try avoid rooting and rebranding if possible.
Has anyone managed to update this?
2 years later and I'm still trying...
focussss said:
Has anyone managed to update this?
2 years later and I'm still trying...
Click to expand...
Click to collapse
For c900 there is no newer firmware.
Flashing anything else than c900 means rebranding - but rebranding requires unlocking Bootloader (not 'rooting')
So wandering, what are you really trying to do for two years?!
- Unlock Bootloader (4 Euros):
https://www.dc-unlocker.com/
- Rebrand properly to be able to update to Nougat eg EVA-L09c432b504:
https://forum.xda-developers.com/showpost.php?p=72153575&postcount=2
I followed that guide but now my phone is stuck on "Type the password to decrypt storage" when I enter my Google password it says it's correct but data on my phone is corrupted. Any ideas?
focussss said:
I followed that guide but now my phone is stuck on "Type the password to decrypt storage" when I enter my Google password it says it's correct but data on my phone is corrupted. Any ideas?
Click to expand...
Click to collapse
Are you talking about TWRP asking for pass or Android?
If Android, on which firmware are you, what was the last step you performed?
Also, make sure you used TWRP for MM, not for Nougat - since you were on c900 MM when you started with rebranding to c432 (?)
Btw, you unlocked the Bootloader?
Thanks for the quick response and all your assistance. I managed to finally boot into EVA-L09C432B182 and will write what I did in the rebranding post for others who run into this issue. I still have no updates on L09C432B182 though.
focussss said:
Thanks for the quick response and all your assistance. I managed to finally boot into EVA-L09C432B182 and will write what I did in the rebranding post for others who run into this issue. I still have no updates on L09C432B182 though.
Click to expand...
Click to collapse
For OTA you must have a valid SIM card and WiFi - check manually to the System Update to trigger checking for an update
You can also try with HiSuite (PC) - latest versions of HiSuite have an option at the bottom to update the firmware
See:
https://huaweiflash.com/how-to-flash-huawei-stock-firmware-all-methods/
You can also update by DLOAD (read the guide above), you must download FullOTA-MF-PV (must be PV), like b360, from Firmware Finder
There is also HWOTA method, see:
https://forum.xda-developers.com/showpost.php?p=75787156&postcount=3
Hello to all fellow mate 20 lite users,
I have questions regarding to firmware update, I have mate 20 lite SNE-LX1 C461 with the update of december and current build number for my device is 8.2.0.105, as I saw with Finder Firmware For Huawei, there is 8.2.0.132 version available for my device, is it safe to download and install firmware from Finder Firmware, and if anybody had tried such procedure on their device?
I tried yesterday and there was no problem. Check if the firmware is the correct one for your device. Use te Erecovery metod.
SOITZZA said:
I tried yesterday and there was no problem. Check if the firmware is the correct one for your device. Use te Erecovery metod.
Click to expand...
Click to collapse
How can I check that?
Chose the update version, scroll down to the bottom and click: check firmware access- check availability and if it matches your model it will say "Firmware approved for instalation". If it says "Firmware not approved" tap a different update pakage. When you find the proper pakage use the steps shown in erecoveri update
Don't update if is not approved!!!
You must NOT to update your Mate if is not approved by Finder Firmware. Please be aware!
Hello, how can someone tell me how to use firmware finder? I do what I have read to put the proxy in the localhost wifi and the port 8080 and it connects to the WiFi but it tells me that I have no connection
The phone is Vodafone company in case it can be the cause
This tool will help you upgrade from EMUI 9.0 to EMUI 9.1 .
Requirements:
- Unlocked Bootloader
- A rooted device (if you don't have root use the TWRP EMUI_9.1_Flasher tool.Bootloader unlock is required))
- ADB Debug enabled
- A PC with Windows OS
- EMUI 9.1 FullOTA firmware
- Ability to follow some simple on-screen instructions
Credits:
@ante0 - for the new Pie based no-check recovery --> you should thank him here
all the others that contributed to this tool
Instructions:
- Download and extract the tool
- Connect your device to the PC and make sure ADB Debugging it's enabled
- Launch the Flash.bat
- Follow the on-screen instructions
Download
EMUI9.0_to_9.1_update_tool.zip
EMUI9.0_to_9.1_update_tool_root.zip -- This version will also install Magisk 19.3 Stable - Magisk Manager it's optional and can be skipped
EMUI_9.0_to_9.1_update_tool_root_3_files.zip -- This version will allow you to flash the base firmware,cust and preload.Obviously,you can skip the Magisk part if you want
TWRP EMUI_9.1_Flasher -- This tool won't require a rooted device
EMUI_9_0_TWRP_Flash_Unbrick_Tool.zip -- Use this tool to flash an EMUI 9.0 firmware if your device is soft bricked and is no longer booting to EMUI OS
Firmwares Collection :
BLA-L29 C432 - 9.1.0.300 - > https://forum.xda-developers.com/mate-10/how-to/firmware-version-mate-10-t3722019/post79923909
BLA-L09 C432 - 9.1.0.300 -> https://forum.xda-developers.com/showpost.php?p=79932379&postcount=14 <- base firmware it's the same as BLA-L29
Hello (i have a mate 10 pro on 9.0 with root),
for fullOTA rom, i use FF to find one, BLA-LGRP2-OVS 9.1.0.303, but links for 3 differentes sizes (3.46, 3.4, 3.49GB) of ROM??
my phone will be rooted again? If not ? can you please tell me how to be root again?
is there some issue with 9.1 ROM?
how can i roll back if need?
Thanks for your job.
syd-3 said:
Hello (i have a mate 10 pro on 9.0 with root),
for fullOTA rom, i use FF to find one, BLA-LGRP2-OVS 9.1.0.303, but links for 3 differentes sizes (3.46, 3.4, 3.49GB) of ROM??
my phone will be rooted again? If not ? can you please tell me how to be root again?
is there some issue with 9.1 ROM?
how can i roll back if need?
Thanks for your job.
Click to expand...
Click to collapse
Hi! I don't know which version it's fine for your device and the only way to know it it's to flash it yourself, but i don't recommend you to do that.
Rooting with Magisk is fine on 9.1, just read the latest posts from this thread - > https://forum.xda-developers.com/mate-10/how-to/guide-magisk-root-mate-10-pro-t3886967/page27
As for the roll-back, ut should be possible to do it with this tool and an appropriate roll-back firmware (again, firmware version might depend on your cust/brand).
I recommend you to keep an eye and also read this thread - > https://forum.xda-developers.com/mate-10/how-to/firmware-version-mate-10-t3722019
Tried this but for some reason it fails when checking firmware on my bla-a09 tried all 4 firmwares on FF
tokoam said:
Tried this but for some reason it fails when checking firmware on my bla-a09 tried all 4 firmwares on FF
Click to expand...
Click to collapse
B303 is not for A09, it's for C800 which is some jp cust.
Most new fw links are not up yet, and since Huawei decided to name all their firmware the same regardless of model its hard to know which is which :/
Success! Updated BLA-L29C432. Thank you!
Krasimir said:
Success! Updated BLA-L29C432. Thank you!
Click to expand...
Click to collapse
Great! Soon i will upload a new version that will also flash the patched Magisk ramdisk_recovery and Magisk Manager (this one will be optional, so those who already have it, can skip it).
It worked for me also.
Why is root needed? Unlocked bootloader is not enough?
criszz said:
Why is root needed? Unlocked bootloader is not enough?
Click to expand...
Click to collapse
Nope! Well, it can be done without root too, but it would require twrp in that case.
Firmware for Bla-l09c432 ?
MagicBox96 said:
Firmware for Bla-l09c432 ?
Click to expand...
Click to collapse
Somewhere on Huawei's servers! xD
I found a firmware on Easy Firmware, bla-l09 c432 b300 but I don't know if it can be obtained for free or secure, you have nothing?
MagicBox96 said:
I found a firmware on Easy Firmware, bla-l09 c432 b300 but I don't know if it can be obtained for free or secure, you have nothing?
Click to expand...
Click to collapse
as stated before, since every update is named the same it's hard to tell which is L09, L29, A09 or AL/TL. AL/TL are easier as VERSION.mbn in UPDATE.zip doesn't have Global strings in it.
From what it seems, if you flash L09 on L29 or vice versa you get endless OTA updates for preload and cust. I don't know if just flashing the cust and preload zips fixes it, but you're free to try if you want.
Here's L09 preload and cust:
Preload: http://update.hicloud.com:8180/TDS/...full/update_full_preload_BLA-L09_hw_eu_R1.zip
Cust: http://update.hicloud.com:8180/TDS/...4//f1/full/update_full_cust_BLA-L09_hw_eu.zip
modified tool to include preload and cust:
https://mega.nz/#!oDR2DYCI!SRQlTq1IriGcEt1Wr--ggrBk7uZ4M_R8OwE6DdvmEEc
Extract and put in the EMUI 9.0 to 9.1 update folder.
Rename cust zip to update_cust.zip and preload to update_preload.zip, put in ZIPS-HERE folder, run modified bat.
Thank you very much, I try very soon. Have any of you done that already?
MagicBox96 said:
Thank you very much, I try very soon. Have any of you done that already?
Click to expand...
Click to collapse
I did on L29 with L29 preload and cust, no problems.
Base (280955) seem to be the same for both L09 and L29 C432.
MagicBox96 said:
Thank you very much, I try very soon. Have any of you done that already?
Click to expand...
Click to collapse
Soon i will upload a new tool that will let you flash all the 3 files, so you could wait. Also, a fried of mine is testing on BLA-L09 C432.
Perfect, also because I don't have the Root permissions on the device, and I don't even have twrp. In fact now I have tried and says that it does not find root permissions. Then I did not understand if the phone should be connected from on, in recovery or fastboot?
MagicBox96 said:
Perfect, also because I don't have the Root permissions on the device, and I don't even have twrp. In fact now I have tried and says that it does not find root permissions. Then I did not understand if the phone should be connected from on, in recovery or fastboot?
Click to expand...
Click to collapse
Tool updated. However, if you don't have root, you can't use it, you must root first.
Okay, I thought it was a tool like the ones we made earlier to install EMUI 9. I'll wait until the new tool is released. : D
Hi All,
I'm new here so please let me know if I've posted incorrectly.
I have a second hand Honor 9 Lite that I would like to use here in the UK.
It has LLD-AL10 (Build 9.1.0.130) EMUI 9.1.0 Android 9.
I think the 'firmware' I need for European is LLD-L31.
Firstly is it possible to change these base operating systems from one country/region to another please?
Secondly if it's possible and can be done ... how do I do it please?
It's a given to me handset with not data to worry about, factory reset unlocked handset.
It looks very nice and I didn't want to give up on it because I can not get the play store and standard gmail apps.
Many thanks in advance.
Gray
GrayInTheUK said:
Hi All,
I'm new here so please let me know if I've posted incorrectly.
I have a second hand Honor 9 Lite that I would like to use here in the UK.
It has LLD-AL10 (Build 9.1.0.130) EMUI 9.1.0 Android 9.
I think the 'firmware' I need for European is LLD-L31.
Firstly is it possible to change these base operating systems from one country/region to another please?
Secondly if it's possible and can be done ... how do I do it please?
It's a given to me handset with not data to worry about, factory reset unlocked handset.
It looks very nice and I didn't want to give up on it because I can not get the play store and standard gmail apps.
Many thanks in advance.
Gray
Click to expand...
Click to collapse
-----
I think to know if anyone has ever done this is my starting point.
i.e. is it possible to do?
Thanks
GrayInTheUK said:
-----
is it possible to do?
Thanks
Click to expand...
Click to collapse
Yes, it is. You need :
1. downgrade to Oreo via HiSuite (process will erase all your data!)
2. unlock bootloader on your phone (you must downgrade to lower build number with google security patch from 04.2018.)
3. download fullOTA-MF Oreo firmware for region C432 from Firmware Finder
4. rebrand your device to C432 using tool "HWOTA8_LLD"
https://forum.xda-developers.com/9-lite/help/rebrand-honor-9-lite-chinese-frimware-t3739762/page3
Or, after bootloader unlocking, root your phone and simly flash Open-GAPPS via TWRP. (a simpler solution, IMO).
bozka1 said:
Yes, it is. You need :
1. downgrade to Oreo via HiSuite (process will erase all your data!)
2. unlock bootloader on your phone (you must downgrade to lower build number with google security patch from 04.2018.)
3. download fullOTA-MF Oreo firmware for region C432 from Firmware Finder
4. rebrand your device to C432 using tool "HWOTA8_LLD"
https://forum.xda-developers.com/9-lite/help/rebrand-honor-9-lite-chinese-frimware-t3739762/page3
Or, after bootloader unlocking, root your phone and simly flash Open-GAPPS via TWRP. (a simpler solution, IMO).
Click to expand...
Click to collapse
Thank you so very much, I really want to use this so I am going to try your suggestion very soon.
I'm going to try hard to understand these individual steps, there is nothing on the phone to worry about so that's a start. Hopefully I can find a way following your kind suggestion.
Many thanks
GrayInTheUK said:
Many thanks
Click to expand...
Click to collapse
Anytime
bozka1 said:
Anytime
Click to expand...
Click to collapse
I've completed the first part after connecting through HiSuite and downgrading to AL10 8.0.0.189(C00)
Does the process cost? i.e. do I need to buy credits in these stages please?
Next is unlocking the boot loader and the lower build number with that 04.2018 security patch somehow?
Many thanks
Gray
GrayInTheUK said:
I've completed the first part after connecting through HiSuite and downgrading to AL10 8.0.0.189(C00)
Does the process cost? i.e. do I need to buy credits in these stages please?
Next is unlocking the boot loader and the lower build number with that 04.2018 security patch somehow?
Many thanks
Gray
Click to expand...
Click to collapse
Next is downgrading to the lower build number, You need to buy credits . You can try two firmware only, LLD-AL10 8.0.0.100(C00) or LLD-AL10 8.0.0.171(C00).
8.0.0.171 contains Google patch from 05.2018, but it's worth a try...
https://easy-firmware.com/index.php?a=downloads&b=file&id=112841
Extract the archive contents and follow instructions in "ReleaseDoc" .
bozka1 said:
Next is downgrading to the lower build number, You need to buy credits . You can try two firmware only, LLD-AL10 8.0.0.100(C00) or LLD-AL10 8.0.0.171(C00).
8.0.0.171 contains Google patch from 05.2018, but it's worth a try...
https://easy-firmware.com/index.php?a=downloads&b=file&id=112841
Extract the archive contents and follow instructions in "ReleaseDoc" .
Click to expand...
Click to collapse
Many thanks for your replies.
Best Gray