Related
Hi,
after flashing from TeamRocket ICS 1.3b (which worked very well for me) to MIUI 4 Note v8 to get Livewings Edition ( I used cwm for that, but did all wipes properly) I stuck at the Logo mentioned in the threadtitle.
The problem is now: I cant get out of this.
cwm works fine, but I cant start any Rom. Tried to flash several ones, but I still keep stucking...
Has someone an idea ?
Laus007 said:
Hi,
after flashing from TeamRocket ICS 1.3b (which worked very well for me) to MIUI 4 Note v8 to get Livewings Edition ( I used cwm for that, but did all wipes properly) I stuck at the Logo mentioned in the threadtitle.
The problem is now: I cant get out of this.
cwm works fine, but I cant start any Rom. Tried to flash several ones, but I still keep stucking...
Has someone an idea ?
Click to expand...
Click to collapse
Try downloading abyss kernel 3.9 and flash it in recovery and stay in recovery and reboot recovery. Then flash any rom after wiping all the cache and dalvik and data before final rebooting the system (after flashing the rom)
This should work !!
Is it possible to flash a stock rom with odin to get back to out of the box ?
im also stuck in a bootloop when i tried flashing a stockrom over ics rom
please help
poope said:
Is it possible to flash a stock rom with odin to get back to out of the box ?
im also stuck in a bootloop when i tried flashing a stockrom over ics rom
please help
Click to expand...
Click to collapse
Use the above method i mentioned. It should work.
If nothing works then flash any rootable rom via PC Odin and you will be back to stock and then can root again and flash any other rom of your choice! Check out Dr Ketan's guide in the stickies post in development section of note forum !
got also the same predicament, just stuck in Samsung Galaxy N7000 bootup logo screen after I went to the recovery mode to format/system, format/cache..
I tried to follow the instructions actually on how to upgrade my CheckRom RevoHd v5 to Version 6...
The instructions were to format /system and format /cache... then copy the ROM to a new folder in the internal SD card...
Now the question is.. how can I copy the CheckRom RevoHD version 6.zip if I can't even boot back in recovery mode..
when I booted back.. it just stucks on that bootup logo screen.. ..
Bro how much time did you wait ? I was having the same problem! At least thats what i used to think... But turns out that the first boot takes REALLY long... took me approx 25 mins with rocketrom v22
If nothing works then flash any rootable rom via PC Odin and you will be back to stock and then can root again and flash any other rom of your choice!
Click to expand...
Click to collapse
Thanks but i'm still stuck in bootloop after flashing a stockrom with odin.
letters_to_cleo said:
got also the same predicament, just stuck in Samsung Galaxy N7000 bootup logo screen after I went to the recovery mode to format/system, format/cache..
I tried to follow the instructions actually on how to upgrade my CheckRom RevoHd v5 to Version 6...
The instructions were to format /system and format /cache... then copy the ROM to a new folder in the internal SD card...
Now the question is.. how can I copy the CheckRom RevoHD version 6.zip if I can't even boot back in recovery mode..
when I booted back.. it just stucks on that bootup logo screen.. ..
Click to expand...
Click to collapse
to boot in recovery press and hold volume up home button and power button all at same time in any screen and keep pressing till the time the samsung logo again shows up. Then leave the buttons...it should now boot in recovery.
abhisahara said:
to boot in recovery press and hold volume up home button and power button all at same time in any screen and keep pressing till the time the samsung logo again shows up. Then leave the buttons...it should now boot in recovery.
Click to expand...
Click to collapse
I already did that sir but It would really not open up recovery mode. I can however go to Download mode(with the Volume down) but what good is that anyway, right?
anyway, I have already fix my issue by reflashing it back via PC Odin...
I guess its either the instructions of flashing to the new version of CheckRom RevoHd v.6 is pretty much vague (though I really followed it to a tee) or simply the instructions are not that just well emphasized...
can you direct me to the rom you flashed via odin?
I tried flashing stock rom but i'm still in bootloop
Razor-1911 said:
Bro how much time did you wait ? I was having the same problem! At least thats what i used to think... But turns out that the first boot takes REALLY long... took me approx 25 mins with rocketrom v22
Click to expand...
Click to collapse
Was waiting for 2,5 hours , but I will try the Steps with Abyss kernel.
EDIT:
Can confirm that your method worked @ abhisahara.
Thank you very much !
poope said:
can you direct me to the rom you flashed via odin?
I tried flashing stock rom but i'm still in bootloop
Click to expand...
Click to collapse
Download any of the directly rootable rom from Dr Ketan's guide here- http://forum.xda-developers.com/showthread.php?t=1424997
and flash via PC odin !
Thanks, i'm out of bootloop, but i now i have the null keyboard error
edit solved: forgot to flash csc aswell
see my sig
what you need now to download a GB custom kernel then flash it with the current cwm: then do the following to get it right and rooted ics
1-right after flash the GB kernel go to advance and then reboot recovery.
2-boot into the new recovery flash any custom rom like darkynote.
3-bootup get mobile odin and get the chainfire repack ics LP1.
4-start mobile odin flash the chainfire repack and make sure all the boxes are ticked and wipe data also ticked.
5-after the flash is done it will reboot auto in to cwm flash the miui and all is done.
this log steps I'm telling you to follow so you won't encounter the banry count and yellow triangle.
enjoy
Hi all. I also have the same problem. Initially I'm using LiquidSmooth rom. And then I went to Criskelo rom to try the rom...and didn't like it. And I tried to restore to LiquidSmooth and failed. Now I'm stuck in bootloader and when I try to flash anything on CWM, it hangs. Even if I leave it for awhile on the menu, it'll hang too. What should I do?
Stuck on Samsung Startup Screen
I tried various Stock Roms, but unable to go ahead of Samsung bootcreen. I can get into recovery menu & also download screen, so I assume my Note is not bricked. However I tried to flash old directly rootable GB ROM, ICS ROM, Latest GB ROM(Wipe) but nothing works. While flashing latest GB ROM "N7000XXLC1 (Wipe)" ODIN was stuck in data.fs, so flash was incomplete, In other ROMS flash was complete but I was stuck on Startup screen. I tried flashing "Q1_20110914_16GB.pit" file also but no luck. I also flashed Abyss Note Kernel 3.9 & 4.2 in ICS ROM, but I don't know how to flash this kernel in GB ROM as I'm unable to get into external memory card where I transferred kernel zip file. Please help me save my Note.
Hello All,
I recently upgraded my GT-I9000 to CWM10 JellyBean 4.1.2 a week ago and all was fine until last night when I was trying to follow one of the youtube videos to increase the internal memory on my phone. I tried it on my phone and for some reason my phone was stuck in the CWM recovery mode. When I rebooted, the phone was going back into recovery mode. I was panicking and in that rush, I tried doing a reset, clear data, clear cache, dalvik and all other stuff on the recovery mode menu. When nothing worked, I tried re-flashing the JB 4.1.2 from recovery mode. This flashing was erroring after 30% and was returning into recovery mode again. I also tried to use odin to flash the Android 2.3 which didn't work and now it goes into the CWM Recovery v3.0.0.5
Could someone please let me know how to get my phone back to work.
I would be really thankful to you all.
Thanks
First of all you have posted in the wrong section. This is only for development.
To get back the recovery, flash http://rootaxbox.no-ip.org/derteufe....1_Jelly_Helly_i9000_CFS_BLN_CMC_20121101.tar in Odin from computer and then flash the Hellybean zip again from the phone.
That is what you should do.
PS: Download the Hellybean zip again. The one that you have now might be corrupted. You need to go into Download mode with 3 Button Combo to use Odin.
Trak-X said:
First of all you have posted in the wrong section. This is only for development.
To get back the recovery, flash http://rootaxbox.no-ip.org/derteufe....1_Jelly_Helly_i9000_CFS_BLN_CMC_20121101.tar in Odin from computer and then flash the Hellybean zip again from the phone.
That is what you should do.
PS: Download the Hellybean zip again. The one that you have now might be corrupted. You need to go into Download mode with 3 Button Combo to use Odin.
Click to expand...
Click to collapse
Apologies for posting in the wrong section. Could the mod's please move this thread to the correct section please.
Thanks Trak-X the first half of your adivse worked for me (the ODIN bit) and I am now able to get into CWM recovery. I tried reflashing the Hellybean zip but it kept erroring at 10%. Error message is shown below
Installing HellyBean
GSM instllation
assert failed: run_program("/tmp/udater.sh")==0
I also downloaded a new Hellybean zip and tried reflashing with no luck and same error message. Pls advise on how I can go further now. I have a 2.3.6 rom downloaded, shall I flash this first to see if it works and if it does, I can flash Hellybean later.
Fixed!!!
chalfont_court said:
Apologies for posting in the wrong section. Could the mod's please move this thread to the correct section please.
Thanks Trak-X the first half of your adivse worked for me (the ODIN bit) and I am now able to get into CWM recovery. I tried reflashing the Hellybean zip but it kept erroring at 10%. Error message is shown below
Installing HellyBean
GSM instllation
assert failed: run_program("/tmp/udater.sh")==0
I also downloaded a new Hellybean zip and tried reflashing with no luck and same error message. Pls advise on how I can go further now. I have a 2.3.6 rom downloaded, shall I flash this first to see if it works and if it does, I can flash Hellybean later.
Click to expand...
Click to collapse
I installed the google apps file and for some reason the phone booted properly this time. Don't know how gapps installation fixed this issue.
I hope someone can help me.
I cannot enter in recovery. Just in Download mode. But my PC doesn't recognise my phone so I can't flash in Odin.
Don't know what to do!?
Just got my Galaxy S back from my Mum today (After I bricked it and sent for repair) she got a note2 omg... Decided to flash a custom rom..
Here goes..
First I followed this guide completelyhttp://http://wiki.cyanogenmod.org/wiki/Samsung_Galaxy_S:_Full_Update_Guide. After I flash the CM 10, my recovery was upgraded to v6.0.1.5 after reboot. But I cannot get pass the recovery. I will have the cm boot animation, then back to recovery again. Tried reflashing the rom, doesnt say any errors but still gets stuck at recovery.
Then I went thru the method at the wiki.cyanogenmod again and successfully flashed cwm recovery 2.5 again. Tried flashing the CM10 rom again but this time round, It shows a long error message ending with "status 7"
I am still able to go into download mode.
Was on stock unrooted 2.3.3 DXJV9.
I made the super no.1 noob mistake of not making a backup........... But, why is rooting and flashing of this phone so hard.....
Pls, any help is greatly appreciated.
Btw, I have manage to flash the stock image via odin but is still stuck in a boot loop.. after Odin completed and reboot, I am back into the stock recovery with the below error messages.
It will work
scpion said:
Btw, I have manage to flash the stock image via odin but is still stuck in a boot loop.. after Odin completed and reboot, I am back into the stock recovery with the below error messages.
Click to expand...
Click to collapse
When u see red error message in stock recovery........u just wipe cache and reboot.......it will work.....
i have wiped everything many times over. but I am still stuck in the bootloop. the red error messages looked serious though.
try this
scpion said:
i have wiped everything many times over. but I am still stuck in the bootloop. the red error messages looked serious though.
Click to expand...
Click to collapse
U just use GB jw4(your region) ROM (don't use single file like PDA).........you use files separately like this [PDA,phone,CSC,pit(512 or 513)]...............use Odin 1.85 for flashing files......,when u complete the flashing it automatically reboot to fulfill the flashing...........then also it gives red error means........ clear only wipe cache and don't clear wipe all data...........reboot your system..... I think this will work for u...........:fingers-crossed:
Thanks. Have it solved. Flashed with another rom with seperate files. I was using the the all in one previously. Got it to run CM10 nightly though till now still not too sure how... But, I m real happy now. It works great so far and I couldnt understand why Sammy refuse to roll out official ones even for 4.0..
Still trying to figure out how to root, flash SGS though.. I have done so for many other device but by far,... this phone is the most complicating....
Aj rocker root
By processor only we not getting stock ICS rom but we getting custom ROM by hacking processor.............
For rooting the ROM u want to be in stock GB ROM like 2.3.5 or 2.3.6 and then u want to download this file(http://download.chainfire.eu/132/CF-Root/SGS/CF-Root-XX_OXA_JVU_2.3.6-v4.3-CWM3RFS.zip)............. after download u want to open Odin 1.85 and select PDA then choose the downloaded file...........select start to flash the file.........reboot and enjoy the root bosssss......if u like this press thanks:fingers-crossed:
Just to make sure..
What I did was,
Flashed Android 2.3.5 XXJVS Firmware and rooted with CF-Root-XX_OXA_JVS-v4.1-CWM3RFS.zip
Flashed the speedmod kernel via heimdall
Wiped data/cache. Flashed Latest CM10 nightly
( at this point, there was a error "status 0" installation aborted. When I reboot, the CM10 boot animation flashed twice and it brought me straight to CWM 6.0.1.5. Is this normal behaviour?? Then, not too sure what to do, I wipe data/cache and flashed CM10 and gapps again. this time round, installation successful and after reboot it boot into CM10. )
Is the above normal behaviour?
Next time I wish to change rom, from where I now( CM10) just need to wipe Data/cache and flashed the other rom?
Try to see if you can flash another custom Rom, if that works then it could be that your files are corrupted..
Have you stated your problem over at CM forums..
# Sent from my blazing slimbean SGS i9000 using Tapatalk 2 #
scpion said:
Just to make sure..
What I did was,
Flashed Android 2.3.5 XXJVS Firmware and rooted with CF-Root-XX_OXA_JVS-v4.1-CWM3RFS.zip
Flashed the speedmod kernel via heimdall
Wiped data/cache. Flashed Latest CM10 nightly
( at this point, there was a error "status 0" installation aborted. When I reboot, the CM10 boot animation flashed twice and it brought me straight to CWM 6.0.1.5. Is this normal behaviour?? Then, not too sure what to do, I wipe data/cache and flashed CM10 and gapps again. this time round, installation successful and after reboot it boot into CM10. )
Is the above normal behaviour?
Next time I wish to change rom, from where I now( CM10) just need to wipe Data/cache and flashed the other rom?
Click to expand...
Click to collapse
OK fine first u want to know something boss......... every firmware having different layout........ correct procedure of flashing is u want to go step by step for enjoy the full features of the ROM ....... u r in GB ROM means then next u want to go ICS ROM........If u r in ICS ROM means then next u want to go jellybean rom and this the correct procedure to use new ROM without the problems...........:good:
scpion said:
Just to make sure..
What I did was,
Flashed Android 2.3.5 XXJVS Firmware and rooted with CF-Root-XX_OXA_JVS-v4.1-CWM3RFS.zip
Flashed the speedmod kernel via heimdall
Wiped data/cache. Flashed Latest CM10 nightly
( at this point, there was a error "status 0" installation aborted. When I reboot, the CM10 boot animation flashed twice and it brought me straight to CWM 6.0.1.5. Is this normal behaviour?? Then, not too sure what to do, I wipe data/cache and flashed CM10 and gapps again. this time round, installation successful and after reboot it boot into CM10. )
Is the above normal behaviour?
Next time I wish to change rom, from where I now( CM10) just need to wipe Data/cache and flashed the other rom?
Click to expand...
Click to collapse
OK fine first u want to know something boss......... every firmware having different layout........ correct procedure of flashing is u want to go step by step for enjoy the full features of the ROM ....... u r in GB ROM means then next u want to go ICS ROM........If u r in ICS ROM means then next u want to go jellybean rom and this the correct procedure to use new ROM without the problems...........:good:
Most times from GB to JB u have 2 flash custom 2, 3 times. So its normal when flashing custom the first time it takes u to bootanimation and hangs (take out battery and go to recovery with 3 button combo and flash again till it says install is completed) or directly into recovery.
If u wanna flash other jb rom just full wipe and flash new custom. Make sure u make a nandroid backup so u can go back easily
Hi everyone
First of all a little history:I used this [PhilZ-cwm6][n7000] v4.93.6 Safe Stock Kernel+CWM6+Root+exFAT+ext4-LT4 to root my n7000 on 4.0.4 (I bought it with 4.0.4).
Then after some time Android wanted an upgrade to 4.1.2 and after some time I just tried it and it failed after booting into recovery mode, because it didnt find a the expected kernel, I think. But I had the chance to boot up again.
OK I then did the update with Kies-Software and everything worked again. Then I rooted the phone again using the same method as mentioned in the post above.
Now today the phone wanted to update again, I thought, OK, if it didnt fail completely the first time, it will fail in recovery mode and let me boot up again.
But...
This time it went into recovery mode and didnt let me boot up again. It just shows the robot with the crystal and the progress bar seems to move a little but then the screen goes black for a second and the robot returns and the progress bar moves a little and the same again.... I dont get into the recovery menu.
I tried samsung kies emergency recovery, it doesnt find my n7000.
I tried to flash the kernel with a newer version from the post above. (I am not allowed to post there). No change it gets stuck in broken recovery mode.
I can push volumedown power and home to get into the download mode.
My question is what can I do?
Is there any other chance to avoid a complete stock recovery (is that the right term/way)?
What do I have to flash and how?
I am a little worried about the brick issues and I dont know which version I have to flash to set it back completely...
Please help & thanks
drz
No worries, since your download mode is still working you can flash a stock Samsung ROM via odin. Download one from here and flash it in odin while in download mode. Latest at this point of time is LT4 http://forum.xda-developers.com/showthread.php?t=1424997
This will give you the stock JB Bootloader, Recovery, and ROM. Its completely unrooted though, and the phone will not be wiped in the process, so remember to do so after you flashed it.
cr0wnest said:
No worries, since your download mode is still working you can flash a stock Samsung ROM via odin. Download one from here and flash it in odin while in download mode. Latest at this point of time is LT4 http://forum.xda-developers.com/showthread.php?t=1424997
This will give you the stock JB Bootloader, Recovery, and ROM. Its completely unrooted though, and the phone will not be wiped in the process, so remember to do so after you flashed it.
Click to expand...
Click to collapse
Thanks a lot, crownest!
I sweated a bucket of blood and seat, because I couldnt wipe cache and data first, but it worked!!!
Everything looks like before!´the update!
Some more questions (sorry):
do you think I should wipe cache and data now?
Is a stock rom like the rom on internal usbcard only?
What about the update? Can I update safely now?
Thanks again for helping...
greetz
drz
Yup you should be able to wipe cache and dalvik with no issues now.
I believe all ROMs be it stock or custom installs to the NAND memory (Someone correct me if im wrong) and never on your internal/external SDcard
As for OTA updates via Kies, I dont see why not, but if the same issue does reoccur again then my suspicions would point to a possible NAND corruption on the device. Not sure if there is a fix for that, but its a risk you gotta take. Or you can always root the phone and flash custom ROMs as new builds get released, this way you'll never have to use OTA updates again.
I've just tried to factory reset my N950F, that had custom rom. This didn't remove my media files for some reason, so I did a full wipe from TWRP.
This has sent me into a bootloop, however I can still get into the download screen for odin. I've tried flashing TWRP again with this but while my laptop says pass it is stuck on 'Downloading, do not turn off target'.
I'm now waiting to download https://www.sammobile.com/firmwares/galaxy-note8/SM-N950F/BTU/download/N950FXXU5DSB2/259437/ am I doing something wrong or do I have to return to stock in order to use the phone again?
Would rather have TWRP and install a custom ROM.
Thanks all,
Andy
Download firmware, flash it with Odin run wait till device turn on, wait some time. Then just simply flash your ROM, root and stuff