Help! Bad Convert MiA2 to Mi6X - Xiaomi Mi A2 / 6X Questions & Answers

Try to install MIUI 10 Pie in my MIA2, I did all the steps well, even delete the Firmware Update files from the file, but when you pass it to the cell phone to install, pass the original and not the edited one, so install MIUI10 with the folder Firmware Update, which does not allow me to return to Android One, nor does MiFlash work, the cell phone works with MIUI without problems, but all the custom roms do not work, any solution? Or have I lost all hope with the AntiRollBack?:crying:

Check Antiroolback
Turn your phone to fasboot mode
Connect your Redmi Note 5 to PC with USB
Step Two
in PC go to C:\adb\
Push*shift*+ Right Click
select Open Command window here
In*CMD*write this
Quote:* ** ***fastboot devices
then write
Quote: fastboot getvar anti
Sent from my MI 6X using Tapatalk

balther said:
Try to install MIUI 10 Pie in my MIA2, I did all the steps well, even delete the Firmware Update files from the file, but when you pass it to the cell phone to install, pass the original and not the edited one, so install MIUI10 with the folder Firmware Update, which does not allow me to return to Android One, nor does MiFlash work, the cell phone works with MIUI without problems, but all the custom roms do not work, any solution? Or have I lost all hope with the AntiRollBack?:crying:
Click to expand...
Click to collapse
¿You tried to flash in edl mode the original rom?

martinpiriz said:
¿You tried to flash in edl mode the original rom?
Click to expand...
Click to collapse
Yes, but Mi Flash and Fastboot flash no work

Related

Hard brick never seen! Mia2 -> mi6x System has been destroyed

Hi. Well I speak Spanish and I used the Google translator.
Well here is my dilemma. I had my Mi A2 with Miui 10, root and twrp. I download from xiaomi.eu la rom 10.3.14 for Mi6x and the i try to falsh but i didn't delete the folder firmware update. (I do not know if it matters) when I power on the phone remains in boot loop. I did not have access to the recovery or twrp. (vol + + pwr) only to fastboot mode. The Mi Flash program error with the original rom of Mia2 (android one) and the rom mi6x (miui 10). And touching blocking the bootloader. From there I see "the system has been destroyed ...". from that moment I did everything. Test point edl and Mi flash recognize as COM# but the flash error. I tried with the screen in fastboot also skips error. flash rom Mi a2 and mi6x. I try directly from the .bat but close immediately. xiaomi my unlock does not work. I do not know what else to do. I have installed all the usb drivers and nothing. I try with 3 pc's. really the one with the solution is a God.
Have you tried flashing the ROM manually (not with Miflash) from fastboot?
willy899 said:
Hi. Well I speak Spanish and I used the Google translator.
Well here is my dilemma. I had my Mi A2 with Miui 10, root and twrp. I download from xiaomi.eu la rom 10.3.14 for Mi6x and the i try to falsh but i didn't delete the folder firmware update. (I do not know if it matters) when I power on the phone remains in boot loop. I did not have access to the recovery or twrp. (vol + + pwr) only to fastboot mode. The Mi Flash program error with the original rom of Mia2 (android one) and the rom mi6x (miui 10). And touching blocking the bootloader. From there I see "the system has been destroyed ...". from that moment I did everything. Test point edl and Mi flash recognize as COM# but the flash error. I tried with the screen in fastboot also skips error. flash rom Mi a2 and mi6x. I try directly from the .bat but close immediately. xiaomi my unlock does not work. I do not know what else to do. I have installed all the usb drivers and nothing. I try with 3 pc's. really the one with the solution is a God.
Click to expand...
Click to collapse
did you know that this latest beta version of miui 9.3.14 needs to install the hex ne kernel as well? because the default kernel of the loop at boot
cmarcom said:
Have you tried flashing the ROM manually (not with Miflash) from fastboot?
Click to expand...
Click to collapse
Yes. With the .bat but didn't work. The cad Windows close quickly.
Rickk18244001 said:
did you know that this latest beta version of miui 9.3.14 needs to install the hex ne kernel as well? because the default kernel of the loop at boot
Click to expand...
Click to collapse
I really do not know. I followed the steps. and flash the .zip with twrp. zero error and on the turn on was left in boot loop and does not enter recovery or twrp.
this the link the rom: xiaomi.eu/community/threads/9-3-14.49609
willy899 said:
I really do not know. I followed the steps. and flash the .zip with twrp. zero error and on the turn on was left in boot loop and does not enter recovery or twrp.
this the link the rom: xiaomi.eu/community/threads/9-3-14.49609
Click to expand...
Click to collapse
Flash Hex or RA kernel.
willy899 said:
Yes. With the .bat but didn't work. The cad Windows close quickly.
Click to expand...
Click to collapse
thats because the fastboot is not in the same folder as the .bat, and you hast to flash hex v288 for wayne in order to 9.3.14 to boot.
I used Havoc rom
Connect phone to pc in fastboot
In cmd:
Fastboot -w
Fastboot set_active b
And boot twrp
Flash rom, flash twrp and switch partition to A
Forum.xda-developers.com/mi-a2/how-to/guide-how-to-flash-custom-roms-stuff-t3876375

Please HELP! MY K20 IS STUCK ON FASTBOOT! NOTHING WORKS!

GUYS Please help I'm Scared as hell, my K20 is stuck in fastboot mode and I don't know what to do! So here is what I did, I heard about the K20 Pro 81hz refresh rate Mod and the android 10, I couldn't find twrp for k20 so i decided to flash k20 pro's twrp (which probably was a big mistake!), I don't exactly remember what exact files i was flashing! I remember after flashing few files or just the twrp of k20 pro (i dont remember exactly) my phone was stuck in fastboot and is still now if i restart or go to recovery or anything it just leads me back to fastboot screen. I flashed android 10 recovery rom via fastboot,which i was not supposed to do, i didn't know the difference b/w the fastboot and recovery rom at that moment, but when i did i downloaded another rom but a stock rom for k20 fastboot variant I don't remember where I downloaded all the files but I downloaded the recovery rom from : https://www.xda-developers.com/download-miui-11-beta-now-for-13-xiaomi-devices-changelog/ and I downloaded the stock rom from : https://rootmygalaxy.net/redmi-k20-and-k20-pro-stock-firmware/ and I downloaded twrp recoveries from other sites, well I guess this is not important where i downloaded these. But after I try to flash the K20 Stock Rom by Mi Flash Tool (keep in mind i tried to flash the android 10 rom with mi flash tool also and that too by any all settings like clean all , keep data, clean all lock, i was just trying everything to get my phone to work! ) So then it gave me error of mismatching device so i searched on youtube to fix this error and tried it but still it wasn't flashing, then I thought maybe when I was trying to flash the android 10 rom many times I might have locked the boot loader, so i used the mi unlocker tool to see, i clicked on unlock it said it started the process, 3 step process of verifying device ,unlocking ,and done but it showed an error on the verifying device it said "can't get info, connect again ". This scares me have I locked the bootloader and now is there no way to unlock it or what??? I need your guys help please tell me what Rom I have to flash or what steps I have to take to get my phone working again! Please
I have a K20 Indian Variant, oh and yeah my bootloader was unlocked before I started to do all of this. I know what I have written might be confusing But PLEASE HELP ME!
Edit: and I also tried to flash the boot by getting boot image from android 10 rom, basically i just flashed randomly...
I also saw a few videos about the edl mode, i tried to get into edl mode and I got into edl mode so If there is a way to flash rom using edl mode do tell me
Edit: And I also think maybe the rom isn't flashing because I might have got the global rom or something can anyone send link to Indian K20 Stock Rom?
Edit: I just downloaded the k20 indian rom the correct one but when i flash through mi flash it says success in 1 second time that means my bootloader is locked but now ALL i need from YOU GUYS is to tell me How to Unlock it, I can't unlock it via Mi Unlock Tool, is there another method?
itzabhi said:
GUYS Please help I'm Scared as hell, my K20 is stuck in fastboot mode and I don't know what to do! So here is what I did, I heard about the K20 Pro 81hz refresh rate Mod and the android 10, I couldn't find twrp for k20 so i decided to flash k20 pro's twrp (which probably was a big mistake!), I don't exactly remember what exact files i was flashing! I remember after flashing few files or just the twrp of k20 pro (i dont remember exactly) my phone was stuck in fastboot and is still now if i restart or go to recovery or anything it just leads me back to fastboot screen. I flashed android 10 recovery rom via fastboot,which i was not supposed to do, i didn't know the difference b/w the fastboot and recovery rom at that moment, but when i did i downloaded another rom but a stock rom for k20 fastboot variant I don't remember where I downloaded all the files but I downloaded the recovery rom from : https://www.xda-developers.com/download-miui-11-beta-now-for-13-xiaomi-devices-changelog/ and I downloaded the stock rom from : https://rootmygalaxy.net/redmi-k20-and-k20-pro-stock-firmware/ and I downloaded twrp recoveries from other sites, well I guess this is not important where i downloaded these. But after I try to flash the K20 Stock Rom by Mi Flash Tool (keep in mind i tried to flash the android 10 rom with mi flash tool also and that too by any all settings like clean all , keep data, clean all lock, i was just trying everything to get my phone to work! ) So then it gave me error of mismatching device so i searched on youtube to fix this error and tried it but still it wasn't flashing, then I thought maybe when I was trying to flash the android 10 rom many times I might have locked the boot loader, so i used the mi unlocker tool to see, i clicked on unlock it said it started the process, 3 step process of verifying device ,unlocking ,and done but it showed an error on the verifying device it said "can't get info, connect again ". This scares me have I locked the bootloader and now is there no way to unlock it or what??? I need your guys help please tell me what Rom I have to flash or what steps I have to take to get my phone working again! Please
I have a K20 Indian Variant, oh and yeah my bootloader was unlocked before I started to do all of this. I know what I have written might be confusing But PLEASE HELP ME!
Edit: and I also tried to flash the boot by getting boot image from android 10 rom, basically i just flashed randomly...
I also saw a few videos about the edl mode, i tried to get into edl mode and I got into edl mode so If there is a way to flash rom using edl mode do tell me
Edit: And I also think maybe the rom isn't flashing because I might have got the global rom or something can anyone send link to Indian K20 Stock Rom?
Edit: I just downloaded the k20 indian rom the correct one but when i flash through mi flash it says success in 1 second time that means my bootloader is locked but now ALL i need from YOU GUYS is to tell me How to Unlock it, I can't unlock it via Mi Unlock Tool, is there another method?
Click to expand...
Click to collapse
I found the solution all i had to do is change the rom folder to C:// and it worked!
Its not working for me plz help me
itzabhi said:
I found the solution all i had to do is change the rom folder to C:// and it worked!
Click to expand...
Click to collapse
i dont know what is wrong but falsh is getting completed in 1 second.
roushancool said:
i dont know what is wrong but falsh is getting completed in 1 second.
Click to expand...
Click to collapse
Bro first of all u need to edit the flashall commands with the notepad and then u should put the rom folder on the desktop and put the mi flash tool on a separate folder also on the desktop if u want me to tell u what to edit just message me and i will tell u how ?
itzabhi said:
I found the solution all i had to do is change the rom folder to C:// and it worked!
Click to expand...
Click to collapse
Bro first of all put the rom in a folder on the desktop (one folder and the files in it ) (not folder inside a folder)
Next copy the flashtool folder to the desktop also
Next edit the flash_all.bat and remove the commands up and keep only commands that starts with (fastboot)
And save.
Then choose the folder and then flash and make sure u choose only (clean all) and not (clean all and lock) from below goodluck bro hope the picture will make you understand

Can't flash MIUI in fastboot - phone reboots

I'm selling my Mi8 and want to replace PixelExperience with official MIUI.
Every time I connect the phone to the computer and click on refresh in MiFlash to detect the phone, the phone reboots.
I've tried a different USB port with no luck.
Does anyone have a suggestion?
Pumpino said:
I'm selling my Mi8 and want to replace PixelExperience with official MIUI.
Every time I connect the phone to the computer and click on refresh in MiFlash to detect the phone, the phone reboots.
I've tried a different USB port with no luck.
Does anyone have a suggestion?
Click to expand...
Click to collapse
There are some different possibilities to solve that. A very easy way is:
1. Remove all system's safety measures from the phone, boot the phone into bootloader (fastboot) and connect it to a PC
2. Via ADB/Fastboot boot the latest TWRP-recovery of Mauronofrio https://sourceforge.net/projects/mauronofrio-twrp/files/Dipper/ (it's not necessary to flash TWRP!)
3. Format data partition (not only wipe!)
4. Use TWRP to flash a clean MIUI 11 ROM from an USB-stick. For Global use the recovery-version at: https://xiaomifirmwareupdater.com/miui/dipper/stable/V11.0.5.0.QEAMIXM/
That's all.
Another easy way would be using Xiaomi ADB/Fastboot Tools 7.0.3 https://github.com/Szaki/XiaomiADBFastbootTools/releases/tag/7.0.3
PrussianWolf said:
4. Use TWRP to flash a clean MIUI 11 ROM from an USB-stick. For Global use the recovery-version at: https://xiaomifirmwareupdater.com/miui/dipper/stable/V11.0.5.0.QEAMIXM/
Click to expand...
Click to collapse
Thanks. Will that replace TWRP with stock recovery (I want it to)?
Pumpino said:
Thanks. Will that replace TWRP with stock recovery (I want it to)?
Click to expand...
Click to collapse
Yes, it will.

Question my mi 11 is bricked

I've tried to flash android 12 beta and accidentally locked my device,
now my device is locked and there is no rom or recovery, I can only access fastboot.
When I try to unlock it, says "please add your account in miui settings" but I can't do that because I have no rom.
what can I do?
If you have access to fastboot you will have to flash stock miui Rom throu mi flash. After that unlock your bootloader again
Edit:
https://c.mi.com/oc/miuidownload/detail?device=1900391
Download the latest official miui ROM, then flash
constantine8080 said:
Download the latest official miui ROM, then flash
Click to expand...
Click to collapse
sweatbox said:
If you have access to fastboot you will have to flash stock miui Rom throu mi flash. After that unlock your bootloader again
Edit:
https://c.mi.com/oc/miuidownload/detail?device=1900391
Click to expand...
Click to collapse
but I can't flash using miflash because the bootloader is locked.
yogevm15 said:
but I can't flash using miflash because the bootloader is locked.
Click to expand...
Click to collapse
You need some one who has authorized account. It has to be done by EDL mode.
zoltan78 said:
You need some one who has authorized account. It has to be done by EDL mode.
Click to expand...
Click to collapse
If you're able to flash the stock rom that came with the phone using mi flash, you're fine. If not, like Zoltan78 said, EDL mode 100%. I had the same issue with a Redmi K20 Pro (china) after flashing global rom and I accidentally left "flash and lock" enabled. I'm in Romania...at 4:00 AM I was on teamviewer with some Xiaomi Dev from Thailand and he had a Dev account to flash it via EDL mode, but I had to remove the back of the phone and hold a screwdriver on 2 pins while booting up the phone.
Okay if flashtool doesnt want may try
- indunesia
- global (5,4GB)
download type must be fastboot its a bit down/lower had to scroll!
dont know which you prefer/what you had
if non of that watch for type fastboot HERE
the tgz can extracted with 7zip
after that there is a tar, that can also be extracted by 7zip
if you not already have it install the latest fastboot or put the fastboot files from miui into that folder
use the flash_all.bat
Happened to me, too. I simply had to unlock the mi 11 again and Android 12 booted. Maybe I have been lucky but it worked
bobr3000 said:
If your mi 11 is bricked I highly recommend @miauthofficiall on telegram. They can unbrick any xiaomi device
Click to expand...
Click to collapse
@Oswald Boelcke

Question Firmware flashing error

Been trying to flash latest fw but I get some error in one case it says that the device eis lemon and de fw is for lime, my device is a Redmi 9T any toughs on the problem?
Thanks
X4n4u said:
Been trying to flash latest fw but I get some error in one case it says that the device eis lemon and de fw is for lime, my device is a Redmi 9T any toughs on the problem?
Thanks
Click to expand...
Click to collapse
1.Download an official firmware, boot your device into your Fastboot Mode with Power+Volume Down Button connect your device to your pc and launch the flash_all.bat
When the flash is completed go to the Stock Recovery with Power Button+Volume Up Button, clean the data and wait your device to boot. When your device booted setting it up and enable USB Debugging from the Developer Tools.
2. Now boot your device to Fastboot Mode using Power Button+Volume Down and try to Flash TWRP or OrangeFOX.
3. Boot your device into Recovery using Power Button+Volume Up
4.Download your favourite Rom
5. Now make a CLEAN FLASH:
Format Data
Flash latest MIUI Weekly
Flash ROM zip
Flash Gapps (for Vanilla build)
Format Data
Reboot System,
Enjoy!
MIUI Weekly Firmware (Lime):​Download​
Fastboot Firmware tgz:​Download​
How do I get the flash_all.bat? Sorry for the newbie questions
X4n4u said:
How do I get the flash_all.bat? Sorry for the newbie questions
Click to expand...
Click to collapse
Think I got it should use miui flasher tool and extract file correct?
X4n4u said:
How do I get the flash_all.bat? Sorry for the newbie questions
Click to expand...
Click to collapse
You can flash your device using only the flash_all.bat without miui flasher tool. Just boot your phone to Fastboot mode, connect your phone using usb cable to your Computer/Laptop and launch the flash_all.bat and your phone will reboot automatically when the flashing is completed! If you get stuck into the MIUI Boot Logo, go to your recovery and clean the data..
I think it works because I've tried it several times and it works!
Download the official firmware from Here:
Redmi 9t (lime) Global MIUI 12 V12.0.16.0.QJQMIXM Fastboot ROM with Android 10.0:​Download​
Thanks a million fw installed recomend using 7zip for crc issues had a bit trouble with that one
X4n4u said:
Thanks a million fw installed recomend using 7zip for crc issues had a bit trouble with that one
Click to expand...
Click to collapse
What is the problem or did you solve it?
I solved it thanks for your help, but has I said when extracting the rom use 7zip because winrar caused crc errors witch made the instalation fail twice thanks once again.
Atanassoww said:
You can flash your device using only the flash_all.bat without miui flasher tool. Just boot your phone to Fastboot mode, connect your phone using usb cable to your Computer/Laptop and launch the flash_all.bat and your phone will reboot automatically when the flashing is completed! If you get stuck into the MIUI Boot Logo, go to your recovery and clean the data..
I think it works because I've tried it several times and it works!
Download the official firmware from Here:
Redmi 9t (lime) Global MIUI 12 V12.0.16.0.QJQMIXM Fastboot ROM with Android 10.0:​Download​
Click to expand...
Click to collapse
I get your point but where to find the "flash_all.bat"?
gray_silver said:
I get your point but where to find the "flash_all.bat"?
Click to expand...
Click to collapse
Inside .tgz archive ( lime_eea_global_images_V12.5.2.0.RJQEUXM_20211111.0000.00_11.0_eea_7ecbf0f3d8.tgz in my case).

Categories

Resources