Database Develop

Multiport charger with sufficient output to quicly charge the Mate 8

Right now I have a 40W Anker 5-port USB charger which works rather well. That is: for current devices. Each output supplies enough juice to charge the connected device as fast as with it's supplied stock charger.
The Mate 8 however can draw 18W's of power to charge quickly. The Anker does not supply this much, even when only using a single port.
Has anybody seen (and tested/confirmed) a Mate 8 quickcharge-compatible multiport charger yet? I know that there already are some quick/fast charge models out there but I read in numerous reviews that the Mate 8 apparently needs it's own charger to reach the high loads/speeds.

Tested and confirmed that QC 2.0 chargers doesn't work well with out Mate8
Original charger is the best!

indeed, unbeatable 100 min charging time from 9-100%
Sent from my Huawei Mate 8 NXT-AL10 using Tapatalk

Yes buddy, it's unbeatable.
While checking on the voltages, I found that QC 3.0 chargers will work.fine with our mate 8. Hence I tested with one Aukey QC 3.0 certified multi charger and it's close enough but still 15min late then original Huawei charger

I've noticed that the huawei charger ramps up to 9 volts right away when charging and the QC 3.0 starts off a 5 volts. This is all at about 84% on the phone. What after market charger is this aggressive that I can purchase in the US??
Sent from my Nexus 9 using Tapatalk

tdamocles said:
I've noticed that the huawei charger ramps up to 9 volts right away when charging and the QC 3.0 starts off a 5 volts. This is all at about 84% on the phone. What after market charger is this aggressive that I can purchase in the US??
Sent from my Nexus 9 using Tapatalk
Click to expand...
Click to collapse
To experience full charging speed, you have to find chargers that support Huawei's Fast Charging Protocal (FCP). Merely having a charger that can output 9V2A is not enough. Chargers that support FCP will also be compatible with Qualcomm quickcharge, but not necessarily vise versa.

Which FAST charger I should order for my new Huawei P9

Hi to all
Just ordered a new EVA-AL00 from eBay last night. I am living in Canada. May I know which charger I should order to take advantage of the quick charging capability of the P9 ?
Is P9 using QC 2.0 or 3.0 ?
Please kindly advise ASAP.

gomcse2002 said:
Hi to all
Just ordered a new EVA-AL00 from eBay last night. I am living in Canada. May I know which charger I should order to take advantage of the quick charging capability of the P9 ?
Is P9 using QC 2.0 or 3.0 ?
Please kindly advise ASAP.
Click to expand...
Click to collapse
P9 doesn't support fast charging
Sent from my EVA-L19 using XDA-Developers mobile app

Akhayev said:
P9 doesn't support fast charging
Sent from my EVA-L19 using XDA-Developers mobile app
Click to expand...
Click to collapse
HI
wrong! fast charging is supported by huawei fast charger
but only with this charger i tryed with asus 5v2A/ 9v2A but dont working

anyone who can provide a link to where i can buy one with an eu plug?

I'm considering buying this phone over the S7 (although still undecided) and I still don't get the battery thing (charging or battery life, I get people telling me all sorts of contradictory things that I'm having a hard time to fact check). That 9V/2A charger doesn't come with the phone, right? How much faster is that Huawei charger compared with the 5V that comes with the phone and what is it called since I can't find it on their site or anywhere? Is that the Mate 8 charger?

Yes it's mate 8 charger
Отправлено с моего EVA-L09 через Tapatalk

raber111 said:
Yes it's mate 8 charger
Отправлено с моего EVA-L09 через Tapatalk
Click to expand...
Click to collapse
Cheers! :good:

scedric57 said:
HI
wrong! fast charging is supported by huawei fast charger
but only with this charger i tryed with asus 5v2A/ 9v2A but dont working
Click to expand...
Click to collapse
Awesome! I need an Australian version of this, what do i search for; is it just a mate 8 charger?

Well, no EU plug still available. But it will be later I think. It is not QC 2 or 3, it won't work. Search for "Huawei 9V 2A Charger".
The result should be like this: http://www.ebay.com/itm/Original-9V...hash=item280f7d97a4:m:mNQwKZr7I5KHReS9CA2RwkA
As I metioned, no EU plug yet, so via adapter only.

Milamber said:
Awesome! I need an Australian version of this, what do i search for; is it just a mate 8 charger?
Click to expand...
Click to collapse
Perhaps this one? http://www.ebay.com/itm/Genuine-Ori...-2A-FAST-AC-Wall-Travel-Charger-/351744631869 (NB I haven't tried it)

tnhh said:
Perhaps this one? http://www.ebay.com/itm/Genuine-Ori...-2A-FAST-AC-Wall-Travel-Charger-/351744631869 (NB I haven't tried it)
Click to expand...
Click to collapse
Perfect, he had 3 and I nailed 2 of them
Hopefully these will quick charge.

Please post results!

The photo shows it is 5V 2A charger, so it is a standart, not a Huawei Quick Charge (9V 2A).

scedric57 said:
HI
wrong! fast charging is supported by huawei fast charger
but only with this charger i tryed with asus 5v2A/ 9v2A but dont working
Click to expand...
Click to collapse
Just a quick question, what's the charging time with that charger? Does it go below the 2 hours for a full charge?

Kutusov said:
Just a quick question, what's the charging time with that charger? Does it go below the 2 hours for a full charge?
Click to expand...
Click to collapse
hi i never look before
i just charge now at 21h59 and 46% i will post the result at 100%
Edit: 100% at 23h02 ( 54% in 1h00 approximatly) but when i have the time i will try a full charge because the fast charge is more active at the start and midle of charging

With this Aukey charger I got from 5 to 95% in about 90 minutes

ladxxdal said:
With this Aukey charger I got from 5 to 95% in about 90 minutes
Click to expand...
Click to collapse
Aukey isn't compatible hisilicon fast charge
Aukey charge at 5V 2.5A no regulation so peraphs no good for the live of the battery

scedric57 said:
Aukey isn't compatible hisilicon fast charge
Aukey charge at 5V 2.5A no regulation so peraphs no good for the live of the battery
Click to expand...
Click to collapse
to be confirmed

scedric57 said:
Aukey isn't compatible hisilicon fast charge
Aukey charge at 5V 2.5A no regulation so peraphs no good for the live of the battery
Click to expand...
Click to collapse
It's fine, it will charge as a standard charger at 5V. I would have to brush up my Ohm's law but I don't even get why Huawei's standard charger on the P9 has 2 Amp electric current value. What matters is the voltage going into the battery and you don't need a 2 Amp charger to give you 5 volts, a regular 1amp will be able to do that. The only difference I know is that 5V at 1 amp are 5 watts and 5V at 2 amps are 10 W. But that has only to do with resistance, I think, a battery isn't fed on watts?
I'm really on the fence about this fast charging thing now. I never got it. Qualcomm's has its QC 2.0 tech but a Motorola charger is faster than any other. An S7 Edge with amuch bigger battery charges as fast as an HTC 10 and the Edge has a 2.0 QC and the HTC is 3.0. The G5 is also 3.0 and charges way faster than the HTC, even compensating for the different battery capacity. And I own a G2 which has no fast charging at all and will charge from 0 to 100% in less than 2 hours on a 5V generic charger, which isn't very far off the times I see with 3000mah batteries and Quick Charge 2.0 or 3.0... Why these differences?? No idea... Somehow I think battery chemistry has a lot to do with it (it does in the RC and electronic cigarette world) but I never see anyone addressing that.
^^^^sorry for the rambling, just thinking/writing out loud

Kutusov said:
It's fine, it will charge as a standard charger at 5V. I would have to brush up my Ohm's law but I don't even get why Huawei's standard charger on the P9 has 2 Amp electric current value. What matters is the voltage going into the battery and you don't need a 2 Amp charger to give you 5 volts, a regular 1amp will be able to do that. The only difference I know is that 5V at 1 amp are 5 watts and 5V at 2 amps are 10 W. But that has only to do with resistance, I think, a battery isn't fed on watts?
Click to expand...
Click to collapse
Nearly right! A little analogy may help... Think of Voltage (V) as the diameter of the water tap, Ampage (A) as the speed of the water through the tap and Wattage (W) as how quick you want the bath the taps are filling!
So you can see, a small diameter tap but high water speed will still not fill bath very quickly, neither will a big diameter tap and slow water speed...you need both together. So 9V2A should charge quicker than 5V2A (18W compared to 10W).
As I understand it the P9 will accept charging at 9V and 2A (their Fast Charging) giving max 18W input so a 9V2A charger should give the best results (which is what the P8's fast charger is)...and what the qualcomm quick charge 2.0 (and 3.0) spec can provide. Now i'm not saying the P9 is a qualcomm quick charge phone, it's not, but my QC2.0 and 3.0 car chargers certainly charge my phone quicker than the included mains charger! So i suspect that the car chargers are providing 9V2A to the phone.
Whether this means any 9V2A charger would do......I don't know

Found replacement fast charger (UPDATE 8/10/16)

I took a chance for the fun of it and bought a 15 dollar (at the time of writing this) charger from newegg here and it works perfectly. This post took me about 5 minutes to write and i plugged my Mate 8 in a 43% and now it is at 54%. When it plugs in, it even gives me the Fast Charging notification and says so on the lock screen. Highly recommend it, for USA owners only or you will need a converter plug.

I think you need the original hauwei quick charger to get 9v2.4a "quick charge".
Im using a QC 2.0 which should do 9v2a, but do not get "quick charge" message, and using software, only see up to 1.7ah; however with the original charger; I get 2.6ah.
What I also noticed was the with the original charger its goes up to 2.6ah in bursts (from 1.4 to 2.6ah) and not constant, while the QC 2.0 have constant 1.7ah.
Not sure which is faster. Also some cables don't go above 500mah, and some cables do give "quick charge" message on original charger. Ordered USB voltage tester to test more.
Im also looking for source for cheap oem hauwei charger.

HUAWEI HW-059200CHQ with EU plug: https://www.aliexpress.com/item/100...L-Charger-adapter-for-Huawei/32668184405.html

Huawei charger with option for EU or US plug.
http://www.ebay.com/itm/Genuine-9V-...hash=item2a6b21d483:m:mKEdY4PKIJdpJ0H_NQVZoCQ

As long it covers the signed agreement between Huawei (FCP) and Qualcomm QC2.0 to support both standards it should work with our mate 8. It must be a 9V2A , be careful some of those sold on AliExpress may have only one voltage of 5v1a and that won't do any fast charging.

ronnie72 said:
Huawei charger with option for EU or US plug.
http://www.ebay.com/itm/Genuine-9V-...hash=item2a6b21d483:m:mKEdY4PKIJdpJ0H_NQVZoCQ
Click to expand...
Click to collapse
Just got the EU version of this one in, can confirm it's identical to the one that came with my Mate 8 and does proper quick charging.

Amazon Good Replacement Quick Charger
this is compatible for the US..very fast charging..even more so than the original charger the Mate 8 came with..I went from 40% until 67% in just under 15 minutes

so i just got mate 8. as usually everyone need more than one charger. is it true that even a charger with QC 2.0 will not charge our phone as fast as the original charger?
i dont have budget to buy $30 charger - will check ebay later.
---------- Post added at 11:15 AM ---------- Previous post was at 11:12 AM ----------
keyid said:
I think you need the original hauwei quick charger to get 9v2.4a "quick charge".
Im using a QC 2.0 which should do 9v2a, but do not get "quick charge" message, and using software, only see up to 1.7ah; however with the original charger; I get 2.6ah.
What I also noticed was the with the original charger its goes up to 2.6ah in bursts (from 1.4 to 2.6ah) and not constant, while the QC 2.0 have constant 1.7ah.
Not sure which is faster. Also some cables don't go above 500mah, and some cables do give "quick charge" message on original charger. Ordered USB voltage tester to test more.
Im also looking for source for cheap oem hauwei charger.
Click to expand...
Click to collapse
this is copy pasted from someone else reply regarding my question of why QC 2 charger is slower than original huawei.
*************
They both have the same power QC 9V x 2A =18W or 12V x 1.5V =18W compared to Huawei 9V 2A =18 Watts
However for the Huawei Mate 8, the only charger that will give you 18W worth of charging power is the Huawei SmartPower charger. Anything else charges it at 10W maximum.
And the Huawei SmartPower charger can only charge other devices at 5V 2A = 10W as well. It only switches up to 9V when it sees a Huawei chip inside the other device.
So it's not 12V 1.5A being 0.5A less than 9V 2.0A - Power is Volts multiplied by Amps.
On that particular phone, if you use a Huawei charger you get 18W. If you use ANY non-Huawei charger, you get 10W.
If the battery capacity is 4000mAh at nominal 3.7V, and the charging circuit is 80% efficient then you need to chuck (4 x 3.7 / 0.8) = 18.5 Watts of power into it to charge it. An 18W charger will do that in just over an hour. A 10W charger will take 1.85 Hours which is almost double the time.
****************

Keep in mind that fast charging wears out the battery more than regular charging. If you have time, use a normal charger with lower current.

Bah, what doesnt wear out a lithium battery? Fast charge on, we can all get replacement batteries for this thing. theyre cheap anyway.

Post your charging time (5v2A, QC3, QC4)

I ordered an A2 and a QC 3 wall charger, I'm considering also a car charger, but seems not that needed.
Please tellme... About your Chargint times (Half/Full) on basic wall 5V2A Chager, and QuickCharge 3.0/4.0 chargers, also on car chargers as well
Also, Does anyone tried an iPad charger?

On QC 2.0/3.0 ? form 10% to 100% - around 1h 10m ( not sure abot QC version but was fast charging icon )

I was measuring charging time with stock charger, here are my results:
Greetings everyone,
I have charged my phone with stock charger that came with it, by the way I have global version. 5V=2A)
After a 30 minutes my phone was at 54% i was surprised with percentage!
After an hour I had 92% of battery charged.
Battery fully charged at 1:13.
I want to ask, how fast would battery charge if I use QC v4.0?
Thank you in advance,
DarkoMiA2, :fingers-crossed: Bosnia

Got mine today. I don't have any qc. But have mi power bank which have qc 3.0 capability. I am using but phone doesn't show any quick charge indicator. Is it normal?

I can't find the link to buy a QC 4 charger(I'm from India). I can't find anyone who has actually used snd tested the device with QC 4 either.

HashDragon said:
I can't find the link to buy a QC 4 charger(I'm from India). I can't find anyone who has actually used snd tested the device with QC 4 either.
Click to expand...
Click to collapse
As of now there are no QC 4.0 charger in market... It'll take couple of months before they get on shelves for sales.. Till then use QC 3.0 or stock charger.
PS, or you can buy mi 3i power bank, it has QC 3.0 capabilites and when QC 4.0 chargers hit the market you can buy one of those too..so then you will have a power bank and a QC 4.0 charger...

veeru1saini1 said:
As of now there are no QC 4.0 charger in market... It'll take couple of months before they get on shelves for sales.. Till then use QC 3.0 or stock charger.
PS, or you can buy mi 3i power bank, it has QC 3.0 capabilites and when QC 4.0 chargers hit the market you can buy one of those too..so then you will have a power bank and a QC 4.0 charger...
Click to expand...
Click to collapse
I actually can't find a link for mi 3i power bank or qc 3.0 wall charger either
BTW, Do you have any idea about the charging % that we can expect out of qc 4.0 in future?

HashDragon said:
I actually can't find a link for mi 3i power bank or qc 3.0 wall charger either
BTW, Do you have any idea about the charging % that we can expect out of qc 4.0 in future?
Click to expand...
Click to collapse
For qc 3.0 wall charger https://www.flipkart.com/syska-qual...STACCEWVGWSNPZFFXWIGNAZQ&marketplace=FLIPKART
MI 2i power bank
Correction it's 2i actually... Mi 10000mAH Li-Polymer Power Bank 2i (Black) https://www.amazon.in/dp/B077RV8CCY/ref=cm_sw_r_cp_apa_i_fFIGBbWDW603N
About qc 4.0 improvement, no idea as there is no charger as of now even in international market..
Edit : quick tip, never but cheap 3.0 chargers found on Amazon (quantum zero, geekzone.. etc)

My Phone won't charge at 27W

I Have the Global Version of the Mi 9, and it wont charge at 27W at all, the highest that i've gotten was 2060mA.
I tried using the Anker PowerPort III Mini 30Watts Charger, and Also the RAVpower RP-PB097 which charges at 45watts.
the Phone is Rooted and i tried using the CrDroid 6.9 ROM with Quantic Kernel 4.14.198, and also tried Xiaomi.EU MIUI 12 Weekly Build 20.9.24
any ideas why and how to fix it ?

For 27W to work, you need QC 4.0+ certified charger. QC 3.0 only won't work even if the advertised power is higher (it would be more useable to tablets and laptops), including Xiaomi's own CDQ02ZM 45W charger. But Xiaomi has MDY-10-EL that exactly supports it and I have as well, granted that's the only QC 4.0+ certified charger I have and therefore 27W only works with that.

leledumbo said:
For 27W to work, you need QC 4.0+ certified charger. QC 3.0 only won't work even if the advertised power is higher (it would be more useable to tablets and laptops), including Xiaomi's own CDQ02ZM 45W charger. But Xiaomi has MDY-10-EL that exactly supports it and I have as well, granted that's the only QC 4.0+ certified charger I have and therefore 27W only works with that.
Click to expand...
Click to collapse
My Anker Charger is QC4.0 Certified and i couldn't even get 15w with it

BahaEzawi said:
My Anker Charger is QC4.0 Certified and i couldn't even get 15w with it
Click to expand...
Click to collapse
Now that's weird, unless you measure when the battery is above 5% or so. I'll record with my USB doctor attached so you can see the incoming voltage/current yourself.

i have same problem too i tested with my dady's 33w xiaomi charger even i couldnt get 18 w with 33w charger.