Database Develop

[Magisk/Root/Xposed/Busybox]Huawei P9 Lite

-This methode is old but working with emui 4 Android MM (6). Not work with Android N (7).
-Xposed not work in systemless mode if your Android security patch is >= november 2016
-Try to search the last version of zip files and apk on google, the version on this tutorial is old.
Hi!
This tutorial will install Magisk, phh's superuser, xposed and busybox on your Huawei P9 lite device!
Tested on a VNS-L31C432B151 version but normally work on all VNS-L31 and VNS-L21.
Magisk will allow you to "hide" the root... not realy just hide because Magisk and phh's superuser systemless edition create the root outside the system folder!
Magisk feature for common user:
-"hide" root (PokémonGo, Androidpay, banking app, ... all work!) work with
-Magisk not only allow you to replace existing file and directories, but also support adding new files and directories into system!
-Update OTA work! (not tested by me)
For more detail visite this post: http://forum.xda-developers.com/android/software/mod-magisk-v1-universal-systemless-t3432382
Phh's superuser work at 100% on this device
After a lot of Xposed version tested I can say that Xposed systemless edition is by far the best for P9 lite!
DONT install busybox on system folder!
Ok let's go:
1 Update your system on last emui version and swipe data/factory reset to get a clean and untouched device!
2 Unlock your bootloader (see multiple method on this forum)
3 Install TWRP 3.0.2.0 (see multiple method on this forum)
4 Download this files: Magisk V6.zip / phh's superuser 17.zip / xposed-v86.5-sdk23-topjohnwu.zip / Magisk Manager.apk / XposedInstaller_by_dvdandroid.apk. Put all this files on your externalSD.
5 Go to TWRP recovery and flash in order [Magiskv6.zip > phh's_superuser.zip > Xposed-v.86.5.zip] also reboot your device.
6 When you are on the homescreen go reboot again.
7 Install Magisk Manager.apk and XposedInstaller.apk, then go to the playstore download and install Phh's SuperUser app AND Busybox meefik. Reboot after this step.
8 Open your setting app and allow permission SD card to Busybox.
9 Open Busybox >> settings. Remplace the path file /system/xbin/ with /data/busybox/ and check "Remplace Applets". Also go Menu Zip Archive and download this zip.
10 Go on TWRP recovery and flash the busybox zip file.
10 please perform 3 or 4 reboot
DONE!
So, please try to open yours setting app. if it appears you have done! If not, please try again this method
Now, go Magisk Manager (app) and switch root togle off, launch your protected against root app and normally work!
(Dont need reboot between switch root off/on!)(Selinux switch work, but not persist a boot)
Have fun!

Well done. Works perfect.

The are no files any more

Links are dead

deleted

Evas0r said:
Battery draining after the process...
Is this xposed fault?
Click to expand...
Click to collapse
yes u have to flash another version

Did anyone try this on Nougat/Android 7?

Alexander33 said:
Did anyone try this on Nougat/Android 7?
Click to expand...
Click to collapse
TWRP with this [RECOVERY]Revolution Recovery Android Nougat {15-12-16} Beta .9 in Nougat but anything I tried to flash failed.

Is there anything one can do to get Pokémon Go working while having all of these installed?

Alexander33 said:
Did anyone try this on Nougat/Android 7?
Click to expand...
Click to collapse
Hey, man I've tested it on my Huawei P9-LITE B370 and it all works perfectly. To flash Magisk, you need this custom recovery (https://forum.xda-developers.com/huawei-p9lite/development/twrp-t3588356)

this really helped me thanks

Helped me alot. Still, post is a bit old, so what I did on b380 version:
FLASH RECOVERY twrp-3.1.1-0-venus.img
FLASH KERNEL Elite+Kernel+for+P9+Lite+CxxB3xx+v10.1.zip
ROOT with Magisk-v13.0(96f8efc).zip
INSTALL busybox archive via recovery to /sbin (for me it installed on /system/xbin, still ok.)
REBOOT after each step
Finally works ! :good:

is this Magisk work on Huawei P9?

I have Emui 5.0 and Android 7.0. I flashed everything except xposed but I still can't use Pokémon Go or Snapchat. Is it beacause i can't flash xposed? And when yes, how can I fix it?
Lg ThePrinoob

ThePrinoob said:
I have Emui 5.0 and Android 7.0. I flashed everything except xposed but I still can't use Pokémon Go or Snapchat. Is it beacause i can't flash xposed? And when yes, how can I fix it?
Lg ThePrinoob
Click to expand...
Click to collapse
flash magisk v13

simo255 said:
flash magisk v13
Click to expand...
Click to collapse
Ok, I will test it!

I installed magisk v13 and got the app but it when it check safety net it doesnt work. What should I do?

ThePrinoob said:
I installed magisk v13 and got the app but it when it check safety net it doesnt work. What should I do?
Click to expand...
Click to collapse
enable magisk hide and see if usb debugging is enabled

simo255 said:
enable magisk hide and see if usb debugging is enabled
Click to expand...
Click to collapse
Okey thank you it worked.

Hey,
If I open the camera app or snpachat I cant make any picture so I have a blackscreen. What should I do? And in youtube or Instagram I cant see videos, they dont load and I also cant hear any sound.
Sorry for my bad english.

[BUG] Magisk refuses to install modules from repo (The zip is not a Magisk Module!)

I've had magisk installed since version 6, I've published some magisk modules already and never had a problem until today.
After a full clean reinstall of Nougat NBD90Z (with wipe) on my Nexus 6 and then flashing Magisk, phh's superuser for magisk, installing phh's superuser apk from play store and magisk manager apk I stumbled upon a previously reported (without details) bug where magisk manager would refuse to install modules from repo claiming they are not magisk modules.
I've struggled trying everything I could including the full wipe (more details here: http://forum.xda-developers.com/apps/magisk/module-app-systemizer-t3477512/69230448#69230448) and bounced some ideas off @pnwsr6 who's had the similar problem on Nexus 6 device.
I've achieved a partially working Magisk Manager (manual installs of ZIP files work, but installs from repo still fail) and here's the list of steps which lead to me having semi-working magisk manager again:
1. I flashed ZIP files of some modules in twrp (I'm attaching App Systemizer and Nexus 6 LED Enabler which I flashed)
2. After the phone booted up I saw the modules active and working
3. Within Magisk Manager I then added the ZIP file of the phh's superuser module from that thread (http://forum.xda-developers.com/attachment.php?attachmentid=3893967&d=1475554052)
4. Now at least manual installation of modules within Magisk Manager are working fine.
@topjohnwu -- I've enabled verbose logging and extra logging for bash commands, but I'm still not seeing anything in the log on top of the regular output.

Created an issue against Magisk Manager so it's easier to track for developers: https://github.com/topjohnwu/MagiskManager/issues/20

Looks like that even after flashing some modules in twrp, Magisk Manager only allows to install from zip only exactly the same ZIP I've already flashed (even a minor change and bump of versionCode results in "This ZIP is not a Magisk Module!"). So it might be an issue of Magisk Manager being unable to write to /magisk despite having storage permission and being granted root access.

Well, it works now (you'll have to wipe again). So here's the sequence of events:
1. Flashed @RatchetPanda's busybox http://forum.xda-developers.com/attachment.php?attachmentid=3850579&d=1471875389 from twrp -- got stuck on a boot animation, rebooted again in twrp, flashed magisk uninstall and it didn't help for some reason.
2. So I force-rebooted into fastboot and flashed nbd90z with wipe.
3. After apps were restored and everything was set up, I booted into twrp (it didn't even ask me if I want to allow /system modifications for some reason), added magisk v8 and phh's r259 root to the list, flashed them both.
4. Once the phone booted I could again install modules from repo/zips.
Maybe something didn't get properly wiped first two times but it's working now @pnwsr6!

I've seen this error as well on my Nexus 6 NBD90Z with Magisk v8. Started with v7 after some heavy modification on my part .
I was sometimes able to fix it by simply extracting the zip and then Magisk Manager would somehow recognize it as a module.. Other times I could extract the zip and then re-archive the contents and Magisk Manager would recognize that as a module. Weird, but doable.

stangri said:
Well, it works now (you'll have to wipe again). So here's the sequence of events:
1. Flashed @RatchetPanda's busybox http://forum.xda-developers.com/attachment.php?attachmentid=3850579&d=1471875389 from twrp -- got stuck on a boot animation, rebooted again in twrp, flashed magisk uninstall and it didn't help for some reason.
2. So I force-rebooted into fastboot and flashed nbd90z with wipe.
3. After apps were restored and everything was set up, I booted into twrp (it didn't even ask me if I want to allow /system modifications for some reason), added magisk v8 and phh's r259 root to the list, flashed them both.
4. Once the phone booted I could again install modules from repo/zips.
Maybe something didn't get properly wiped first two times but it's working now @pnwsr6!
Click to expand...
Click to collapse
I probably won't try again until next update, and hope the wipe just wasn't clearing something. I have the zip installed through twrp and working for now so I'm good till then.

just wondering if you're still having this issue with v9? I had modules installed fine under v6, but never really installed any modules under v8 to see if this problem occurred for me. now that I'm on v9, which has been wiped clean to start, I can no longer install any modules via Downloads or in the Modules section... any suggestions?

I have the same issue when trying to install viper with v9 on Nexus 6P DP2
Skickat från min Nexus 6P via Tapatalk

Same here. Find a fix ?

From what I hear, ZIP/module management has been reworked in the upcoming magisk v10, so unless you want to go the route I went thru, you can just wait for that.

stangri said:
From what I hear, ZIP/module management has been reworked in the upcoming magisk v10, so unless you want to go the route I went thru, you can just wait for that.
Click to expand...
Click to collapse
Just an FYI, I do still have this problem, but can install the zip through twrp. Maybe 10 will be the solution.

I had the same problem, I cleared magisk manager data and it works fine now

Didn't help
Sent from my SM-G532F using Tapatalk

I've published snapshot builds of magisk v10 and magisk manager v2.6, try these together to see if they'd help.

stangri said:
I've published snapshot builds of magisk v10 and magisk manager v2.6, try these together to see if they'd help.
Click to expand...
Click to collapse
I tried the latest one from the 26th, magisk manager keeps crashing when trying to install the downloaded dialer/contacts on HTC 10.

Meowdib said:
I tried the latest one from the 26th, magisk manager keeps crashing when trying to install the downloaded dialer/contacts on HTC 10.
Click to expand...
Click to collapse
Weird, do you have the same problem with magisk manager 161223?

stangri said:
Weird, do you have the same problem with magisk manager 161223?
Click to expand...
Click to collapse
Same

I need a Help to download modules using magisk
Lastest version, Included phh root, manager is from G. play,
But Modules download function is not working
Say "No modules found" for download to install via magisk.

Magisk failed to start after installing a module. How to remove this module?

Hi,
after installing App Systemizer, Magisk failed to start after reboot. Magisk Manager shows the installed version (11.1) but no root (MagiskSU). The menu for deinstalling modules is not available.
How can I remove the App Systemizer?
(Magisk 11.1, LineageOS14.1)

hmpffff said:
Hi,
after installing App Systemizer, Magisk failed to start after reboot. Magisk Manager shows the installed version (11.1) but no root (MagiskSU). The menu for deinstalling modules is not available.
How can I remove the App Systemizer?
(Magisk 11.1, LineageOS14.1)
Click to expand...
Click to collapse
Use magisk-mount in this thread:
https://forum.xda-developers.com/apps/magisk/collection-magisk-modules-t3445257
After flashing, you can navigate to and delete the module's folder.

Thank you. Works now.
Interestingly, after installing magisk-mount Magisk started up correctly and with root. What…

Root using Magisk v14

Hello,
I just got my P10 (VTR-L29) yesterday, coming from a P8 Lite that I used to play a lot with and I already miss the adblock and the clean debloated system.
According to the new version of Magisk here, there is a new install method that works if you don't have a custom recovery like it used to be in the past. The new method modifies the boot.img via Magisk Manager, stores it in a folder and then you have to flash it with adb.
My question is: Do I have to unlock my phone in order to do that trick? Anyone else that tried something similar?

Nobody?
Maybe I'm not clear enough..
Steps to reproduce:
-install Magisk Manager 14 and use the inside app patcher
-find the patched boot.img on storage
-move the boot.img in PC storage
-use the PC in order to flash the patched boot.img
-reboot and wait
It's supposed to work that way but I don't want to unlock the bootloader,atleast for now.
Is it safe to do?

Xperias do not boot with the bootloader locked if boot.img is changed. I guess it will be the same for Huaweis.

So the only way to do that is to unlock the bootloader..seems like I have to do it lol.

Magisk v14 is working on my device. Unfotunately, i cannot pass safetynet. How about you guys?

Working but I Guess that You unlocked the bootloader,right?
You can try to use the universal safetynet fix, flash it in twrp and check.

Firicel69 said:
Working but I Guess that You unlocked the bootloader,right?
You can try to use the universal safetynet fix, flash it in twrp and check.
Click to expand...
Click to collapse
Already tried that (the new one for v14). Unfortunately, it didn't work.
Thank you anyway

garris_bibop said:
Magisk v14 is working on my device. Unfotunately, i cannot pass safetynet. How about you guys?
Click to expand...
Click to collapse
I had the same problem. Maybe my experience will help:
Open Magisk manager and check Log->Magisk. Are there any messages from MagiskHide? It should be.
Try this:
1. Open Magisk manager and disable Magisk hide.
2. Reboot
3. Open Magisk manager and enable Magisk hide.
I used commands in Terminal Emulator
Code:
su
magiskhide --disable
magiskhide --enable
At first it didn't work out but after a lot of desperate enabling/disabling and few reboots MagiskHide started to work (I couldn't determine the reason of its misbehaving).
For now I successfully pass SafetyNet checks.

[Q] How can I correctly uninstall EdXposed?

Hey! I recently got banned from Snapchat and I now want to uninstall that thing.
I installed the Magisk modules: Riru - Core & Riru - EdXposed
I installed the EdXposed Installer apk
How do I completely remove EdXposed? (I saw an uninstaller at the EdXposed Github. Do I need this?)

Just delete the edxposed modules, the app, and that's it
Sent from my Xiaomi Mi 8 Lite through Tapatalk

Fedray said:
Just delete the edxposed modules, the app, and that's it
Sent from my Xiaomi Mi 8 Lite through Tapatalk
Click to expand...
Click to collapse
Does EdXposed modify files on the system partition? Or only Xposed?

SebiAi said:
Does EdXposed modify files on the system partition? Or only Xposed?
Click to expand...
Click to collapse
That's the advantage of magisk modules, they don't modify anything on your system, if you disable or delete them everything goes back to original
Sent from my Xiaomi Mi 8 Lite through Tapatalk

Fedray said:
That's the advantage of magisk modules, they don't modify anything on your system, if you disable or delete them everything goes back to original
Sent from my Xiaomi Mi 8 Lite through Tapatalk
Click to expand...
Click to collapse
I mean the apk itself. Does it modify system files?

SebiAi said:
Hey! I recently got banned from Snapchat and I now want to uninstall that thing.
I installed the Magisk modules: Riru - Core & Riru - EdXposed
I installed the EdXposed Installer apk
How do I completely remove EdXposed? (I saw an uninstaller at the EdXposed Github. Do I need this?)
Click to expand...
Click to collapse
Just flash the uninstaller zip from here, and it'll remove all remnants of EdXposed. I had a look at the flashable zip and it is deleting the modules created in Magisk Manager as well as the following two folders (which don't get removed if you just remove the modules from Magisk Manager):
/data/misc/riru/modules/edxposed/
/data/misc/riru/modules/edxp/

shadowstep said:
Just flash the uninstaller zip from here, and it'll remove all remnants of EdXposed. I had a look at the flashable zip and it is deleting the modules created in Magisk Manager as well as the following two folders (which don't get removed if you just remove the modules from Magisk Manager):
/data/misc/riru/modules/edxposed/
/data/misc/riru/modules/edxp/
Click to expand...
Click to collapse
Can I flash this through Magisk Manager? I don't have TWRP installed.

SebiAi said:
I mean the apk itself. Does it modify system files?
Click to expand...
Click to collapse
No
chalseu said:
Can I flash this through Magisk Manager? I don't have TWRP installed.
Click to expand...
Click to collapse
No
Sent from my Xiaomi Mi 8 Lite through Tapatalk

chalseu said:
Can I flash this through Magisk Manager? I don't have TWRP installed.
Click to expand...
Click to collapse
If you don't have TWRP, then just delete the following folders (if they exist for you) using a root file explorer and reboot, you should be good:
/data/adb/modules/riru_edxposed/
/data/adb/modules/riru_edxposed_sandhook/
/data/adb/modules/riru_edxposed_whale/
/data/misc/riru/modules/edxposed/
/data/misc/riru/modules/edxp/

anyone tried on android 10 yet ??
got bootloop on gsi

TheUndertaker21 said:
anyone tried on android 10 yet ??
got bootloop on gsi
Click to expand...
Click to collapse
Successfully uninstalled on Pie (uninstalled apk, disabled both Riru Modules, Reboot, Boot in TWRP, Flashed uninstall)

shadowstep said:
If you don't have TWRP, then just delete the following folders (if they exist for you) using a root file explorer and reboot, you should be good:
/data/adb/modules/riru_edxposed/
/data/adb/modules/riru_edxposed_sandhook/
/data/adb/modules/riru_edxposed_whale/
/data/misc/riru/modules/edxposed/
/data/misc/riru/modules/edxp/
Click to expand...
Click to collapse
I've deleted the riru folder since I've also uninstalled the Riru - Core module thinking it was necessary. Now, I'm afraid to reboot. Lol

chalseu said:
I've deleted the riru folder since I've also uninstalled the Riru - Core module thinking it was necessary. Now, I'm afraid to reboot. Lol
Click to expand...
Click to collapse
most likely impossible that it will bootloop.

I'm on android 10 (lineageOS 17) and followed the instructions from the Youtube Vanced telegram channel.
1. Download and install MagsikHide Props Config via Magisk (download link below) then Reboot
2. Download any Android Terminal Emulator
3. Type "su" then "props" WITHOUT quotation marks
4. Type "1" for Edit device fingerprint
5. Type "f" for Pick a certified fingerprint
6. Type "18" for Xiaomi
7. Type "17" for Xiaomi Pocophone F1
8. Type "y" for yes
-Would you like to activate device simulation?
Type "n" for no
9. Then reboot by typing "y"
After all that, you can check the SafetyNet. If both passes, congrats!
Click to expand...
Click to collapse
It triggered both ctsProfile and basicIntegrity. The edXposed uninstaller was a .bin file, and after I renamed it to .zip and flashed it in TWRP the safetyNet issues still remain.
No bootloop though.
I uninstalled the Edxposed Manager app. Switched in Magisk Manager Settings to "Core only Mode" and rebooted. Then cleared cache of play services and cache and storage of play store after force stopping both. Deactivated "Core only Mode" and rebooted. SafetyNet Check passes again.

Nevermind
I read the instructions in the prior post wrong.
Works now

lucidBrot said:
I'm on android 10 (lineageOS 17) and followed the instructions from the Youtube Vanced telegram channel.
It triggered both ctsProfile and basicIntegrity. The edXposed uninstaller was a .bin file, and after I renamed it to .zip and flashed it in TWRP the safetyNet issues still remain.
No bootloop though.
I uninstalled the Edxposed Manager app. Switched in Magisk Manager Settings to "Core only Mode" and rebooted. Then cleared cache of play services and cache and storage of play store after force stopping both. Deactivated "Core only Mode" and rebooted. SafetyNet Check passes again.
Click to expand...
Click to collapse
The only method that's working flawlessly as of Aug 2020. Thanks kind stranger

Fedray said:
NoNo
Sent from my Xiaomi Mi 8 Lite through Tapatalk
Click to expand...
Click to collapse
Can I flash this via ADB sideload?

I installed EdXposed but it bootloops if I try to boot my phone with root enabled. If I flash a non-rooted bootloader, then I can boot.
So now what I want to do is uninstall an EdXposed that's installed on a phone without root -- is that possible by any chance? Probably not?
Edited to add: And there's no TWRP available (Android 11 Pixel 4a).

I solved my problem; here's how:
1.
Code:
fastboot flash magisk_patched.img
2. Boot into the bootloop, and connect USB. Adb is usable during the bootlooping!
3.
Code:
adb shell magisk --remove modules
4. Reboot into safe mode.
5.
Code:
adb shell su
6.
Code:
rm -rf /data/misc/riru/
7. Reboot!

eater99999 said:
I solved my problem; here's how:
1.
Code:
fastboot flash magisk_patched.img
2. Boot into the bootloop, and connect USB. Adb is usable during the bootlooping!
3.
Code:
adb shell magisk --remove modules
4. Reboot into safe mode.
5.
Code:
adb shell su
6.
Code:
rm -rf /data/misc/riru/
7. Reboot!
Click to expand...
Click to collapse
I have the same problem, but after step 3 my phone is automatically reboots to Bootloader Mode.
How did you manage to go to Safe mode from there?