Related
Hi folks,
I have recently had an issue with the Moto G 2nd gen ONLY since yesterday with the Camera (Moto Camera app). I had been able to use the camera in the morning.
I tested with other apps which access the camera such as Instagram. Instagram could not start taking photo at all.
I don't know for what reason, the camera cannot start any longer. I tried to wipe the cache but it did not help at all. I am running standard Moto Android 5.0.2, with no custom firmware installed at all.
Does anyone know what is happening to my phone?
Thanks a lot for looking.
Try going to setings-->apps-->all, choose camera,delete cache,delete data,uninstall updates and stop the app. Reboot the device,try if camera app works. If yes install updates from playstore. If this doesn´t work boot the phone into recovery and delete cache partition. Maybe try first procedure again.If you are rooted you can try to uninstall camera via Titanium and install again.
Wolfcity said:
Try going to setings-->apps-->all, choose camera,delete cache,delete data,uninstall updates and stop the app. Reboot the device,try if camera app works. If yes install updates from playstore. If this doesn´t work boot the phone into recovery and delete cache partition. Maybe try first procedure again.If you are rooted you can try to uninstall camera via Titanium and install again.
Click to expand...
Click to collapse
Thanks for your suggestion :good:. I've done all of those steps. Even, I came to a point wipe all data and factory reset. No app installed rather than what comes with the phone. I still have the same error. Does it mean the camera has been physically broken?
Alright guys, I had to talk to Motorola Support about my case last week. After a long chat, I have it repaired under the warranty policy. I just received it back now. The camera was replaced due to hardware issue. Case closes here guys, thanks for the help so far.
I have moto g 2014 edition XT1068. It is rooted and running CM 12.1 nightly.
I dont have any xposed framework installed. When i am trying to open the stock camera app it shows can't connect to camera error. I have tried clearing cache. I also have force stopped, clear data and cache of camera but not use. Any way to check or fix the issue. Any input appreciated.
install
google camera helps you to open camera
shivam_motog2 said:
google camera helps you to open camera
Click to expand...
Click to collapse
tried that already. Even trid camera zoom. no difference. thanks anyway
motorola x xt1052 camera clarity wrost after flashing to cm 12.1 , gapps r stopped working,
malli8043 said:
motorola x xt1052 camera clarity wrost after flashing to cm 12.1 , gapps r stopped working,
Click to expand...
Click to collapse
To use Stock camera, you've to be in Stock ROM.
May be you'll need to check and flash another set of Gapps or wipe cache
@malli8043 hi, I'm having the same issues with the camera crashing on and on. I've been trying to change settings, cleared cashe, cleaned up dalvik, but ended up getting the error after a while. I installed a different rom (from Lineage 6.1 to Mokee) But after the optimization of the applications it stops working. The problem is that the front camera only works on, but the back camera has some issues with. I opened a discussion on this but no one is answering.
dritank said:
@malli8043 hi, I'm having the same issues with the camera crashing on and on. I've been trying to change settings, cleared cashe, cleaned up dalvik, but ended up getting the error after a while. I installed a different rom (from Lineage 6.1 to Mokee) But after the optimization of the applications it stops working. The problem is that the front camera only works on, but the back camera has some issues with. I opened a discussion on this but no one is answering.
Click to expand...
Click to collapse
No one is answering...without offence, dude, your cross posting is kinda spam, and will lead you to nowhere! Let's say, more honesty, that you already got your answer, but maybe you didn't like it. For example, I personally adviced you to erase everything in your phone and perform a fully clean flash... Your problem doesn't exist on board the other moto x, do you understand it? So, no one could give you an answer about the how and why you experience such issue. Erase everything, also internal memory, then flash rom + gapps! Good luck
Hi @stefanowall, I didn't get any answer and I'm still waiting for one. I did twice a full clean flash, install the rom, install gapps(nano or pico) but it didn't work. Actually it stops working after the app updates, when it does the optimization of them, I did erase xposed framework, greenify, and all that was suspected in interfering. But the problem still persist. I think it is a binary that gets corrupted along with something else, or is a conflict of camera permission, because I don't understand why the camera settings are changed and only the front camera works, that's why I posted the pictures of the camera settings. The only solution I found was that I flashed a Motorola camera from Lolipop version and after that both cameras were working surprisingly. So I'm testing it now and will let you know if this works. But still I think that there is a conflict or a something like that...
---------- Post added at 05:53 AM ---------- Previous post was at 05:52 AM ----------
Hi @stefanowall, I didn't get any answer and I'm still waiting for one. I did twice a full clean flash, install the rom, install gapps(nano or pico) but it didn't work. Actually it stops working after the app updates, when it does the optimization of them, I did erase xposed framework, greenify, and all that was suspected in interfering. But the problem still persist. I think it is a binary that gets corrupted along with something else, or is a conflict of camera permission, because I don't understand why the camera settings are changed and only the front camera works, that's why I posted the pictures of the camera settings. The only solution I found was that I flashed a Motorola camera from Lolipop version and after that both cameras were working surprisingly. So I'm testing it now and will let you know if this works. But still I think that there is a conflict or a something like that...
I downloaded the latest Urnyx Gcam build. I am currently on LineageOS 17.1
I went to take a selfie video. The app froze and the front pop-up camera refuses to close itself.
- I used the stock camera app to bring down the front camera, it doesn't work.
- Restarted the phone couple of times
- Factory reset
- Change ROMs
- Used the motor.apk to manually bring down the camera, doesn't work too. It says "camera alread retracted" Link: https://forum.xda-developers.com/attachment.php?attachmentid=4930537&d=1579448949
I already tried flashing an AOSP based ROM, still didnt work.
- Dropping down the phone to my bed, doesn't work
Please I am in need of help. I can't put my phone on the pocket.
Not sure if it helps, I had the same issue on lineage yesterday and for some reason this app was able to retract it.
https://m.apkpure.com/popup-camera-no-sound/com.sjh.popupcamera
harry_turtle said:
Not sure if it helps, I had the same issue on lineage yesterday and for some reason this app was able to retract it.
https://m.apkpure.com/popup-camera-no-sound/com.sjh.popupcamera
Click to expand...
Click to collapse
Thanks for the reply. I am on Lineage when this happened too.
That app you sent me didn't work tho.
Fixed the issue by formatting data and flashed back to EU ROM MIUI 12.0.3.0
Has anyone made the ANXCamera run on Poco x3 with a custom ROM?
I'm using @gardiols LineageOS 17.1 https://forum.xda-developers.com/t/rom-10-lineageos-17-1-unofficial-surya-karna.4202533/ with Magisk 22.1.
I used Magisk to install ANXCamera.190, ANXFramework.190, ANX48MPFix R.201 and (after getting stuck) Bootloop-Hotfix.190
I found two new apps, ANX Camera and ANX Scanner on my phone after flashing. While ANXScanner seems to work just fine, ANX Camera just makes a black screen (first start after reboot) or just a crash (all other attempts).
I was doing something wrong:
I am getting black screen when I open ANXCamera.
Enable all permissions manually.
Click to expand...
Click to collapse
(from a faq on github, not the anxcamera homepage)
Some fiddling later:
I still get "Can't connect to camera" in Portrait mode. event tho I have the 48 MP fix installed.
I also tried out the 64 button (in more), which stopped the camera from doing anything.
Switching to front camera crahes the app.
So it's kind of "works a little, handle with care" kind of thing.
Also: The camera that came with lineage was uninstalled when I flashed the ANXCamera files, which I did not expect.
FWIW, I recall reading somewhere that you need to start with ANXCamera.150 and open it, before going to ANXCamera.190...
This Telegram channel has the working version of ANXCamera.
Just follow the instructions,
It works fine on my Poco X3 running Evolution X 5.6
Cheers
Well, I have now a fully wiped and formated Lineage, downloaded as instructed 1.5 and 2.3_N from the telegram group. Flashed 1.5, booted, started 1.5 (crashed without delay), reboot to recovery, flashed 2.3, reboot, Camera says" can't connect to camera".
That's worse than my first try
EDIT for readability
Blechpirat said:
Well, I have now a fully wiped and formated Lineage, downloaded as instructed 1.5 and 2.3_N from the telegram group. Flashed 1.5, booted, started 1.5 (crashed without delay), reboot to recovery, flashed 2.3, reboot, Camera says" can't connect to camera".
That's worse than my first try
EDIT for readability
Click to expand...
Click to collapse
Works fine on Nitrogen OS
Blechpirat said:
Well, I have now a fully wiped and formated Lineage, downloaded as instructed 1.5 and 2.3_N from the telegram group. Flashed 1.5, booted, started 1.5 (crashed without delay), reboot to recovery, flashed 2.3, reboot, Camera says" can't connect to camera".
That's worse than my first try
EDIT for readability
Click to expand...
Click to collapse
It behaves almost the same for all OSS vendor based ROMs. I have tried on crDroid and Wave. It can open, but has very slow autofocus, and inability to switch to video (will lag then crash)
It works fine on miui vendor based ROMs though.
Pardon my English
Thanks for the Update.
RogueBanana said:
It behaves almost the same for all OSS vendor based ROMs. I have tried on crDroid and Wave. It can open, but has very slow autofocus, and inability to switch to video (will lag then crash)
It works fine on miui vendor based ROMs though.
Pardon my English
Click to expand...
Click to collapse
I'm on Havoc OS ROM(not miui) and and camera is perfect. the camera works perfectly well all lenses work it's fast and video works too.
After installing Havoc ROM magisk and a custom kernel this is what I did.
Except I flashed both and straight through my recovery and not in magic.
1- Flash ANX 1.5 in Magisk.
2- Reboot and Allow all Permissions & launch the camera.
3- Now Flash ANX 2.0 in Magisk.
4- Reboot & Enjoy,Everything works Fine
It is necessary to follow the step! Otherwise there will be bugs.
©@konsumeri_mods
Thanks for the update. Is anyone able to provide the 1.5 version ?
It is in their telegram channel. Too deep to dig up. Glad that it works at me after trial and error.
Try this one, working fine for me on OSS based ROMs. But this one was the last version, further ANX camera magisk module will be developed by konsumeri.
MOD EDIT: Attachement removed
okay seems that i got a problem. captured images wont save even that it is all granted. im using anx camera 190 installed in evolution os android 11. it worked on 1.5 then after installing 2.0 it doesnt work anymore
PAPalinskie said:
It is in their telegram channel. Too deep to dig up. Glad that it works at me after trial and error.
Click to expand...
Click to collapse
Just click on the pinned message and it's the first post down.
Hello, I installed anx camera and it works great. There is also a Magisk module with which I can delete the installed camera in aosp-Rom?
Hello, I installed ANXcamera 185R in crdroid7.6. Is there a way, to save the pictures to sd-card? I can tick "Save to sd" in camera settings, but ANXcamera saves to internal DCIM-Path. After restart ANXcamera Save to sd is unticked...
Thank you.
Are we able to install ANX cam here? If we can anyone who have a link where I can get it? Thanks!
Thank you for great help...
@iSean03 : search for MOD EDIT: Link removed due to income generation
Hi im on pixel experience a11 oss vendor which version of camera should i flash oli tried 195 but ended up stucked in boot screen a step by step instructions would be appreciated