For Oneplus 3 Only.(not 3t)
Requirements:
1. Unlocked Bootloader with Custom recovery twrp 3.3.0.1 installed.
If you are running OOS 5.0.8, OR any other Custom Rom with TWRP 3.3.0.1 Installed you can install Community Beta Pie Rom without losing Data by this method.
Steps:
1.In Twrp Advance Wipe , Wipe Dalvik/ART Cache, Cache , Data , System.
2.Then Flash Community Beta Pie Rom https://forum.xda-developers.com/oneplus-3/how-to/official-android-9-community-beta-t3922319 , Thanks @abhibnl for Sharing the Rom.
3.After Flashing DON'T REBOOT, Flash This
https://drive.google.com/file/d/1kV8JhENmqrGc5zL0vAr3xmvXg_wriX0O/view?usp=sharing
4.Flash Magisk 19 If you want root.
I Recommend custom kernel for OOS PIE made by @mcdachpappe link to thread: https://forum.xda-developers.com/on...-development/kernel-renderzenith-mcd-t3838788
Then you can Reboot and Enjoy your Pie Rom. It will Boot up Much Faster.
Proof:
1. From custom rom pie to OOS PIE
https://youtu.be/vc-Uy9Xto7k
2. From OOS PIE to Custom Rom Pie
https://youtu.be/rS1ZBRHskn4
3. From OOS Oreo 5.0.8 to OOS Pie
https://youtu.be/BKTQ0FBB9OY
What does the zip file do ?
And does the internal storage stay if i didn't flash magisk?
SuperEvil said:
What does the zip file do ?
And does the internal storage stay if i didn't flash magisk?
Click to expand...
Click to collapse
This zip contains bootloader of 5.0.8 but modem of pie rom . And internal stays like usual if you don't flash magisk. But it's always good to flash magisk if you want to use apps that require root.
Actually i don't need root.
Because of that my banking apps don't work.
SuperEvil said:
Actually i don't need root.
Because of that my banking apps don't work.
Click to expand...
Click to collapse
Without root it will work fine too.
Does this method work on a custom pie rom?
Yes
Rafeh said:
Yes
Click to expand...
Click to collapse
Are you sure? Heard flashing on top of custom pie rom may cause some issues.
Work on encrypted device ?
Yes
Link for TWRP 3.3.0.1, please...
Enviado do meu ONEPLUS A5010 através do Tapatalk
https://dl.twrp.me/oneplus3/
Your proof video really needs to be made properly. First, you are flashing it on top of a pie rom. Second, you are flashing a custom Pie OOS beta ROM.
What you can do is, you can roll back to OOS 5.0.8 stock, show that your phone is encrypted, then go on to flash original Pie community beta zip, then your firmware and then boot it up.
Ok, so this was a custom pie build of community beta. I thought this could be done with the official custom build. Thank god, i was about to flash official community pie beta on top of custom pie rom.
Rafeh said:
For Oneplus 3 Only.(not 3t)
Requirements:
1. Unlocked Bootloader with Custom recovery twrp 3.3.0.1 installed.
If you are running OOS 5.0.8, OR any other Custom Rom with TWRP 3.3.0.1 Installed you can install Community Beta Pie Rom without losing Data by this method.
Steps:
1.In Twrp Advance Wipe , Wipe Dalvik/ART Cache, Cache , Data , System.
2.Then Flash Community Beta Pie Rom https://forum.xda-developers.com/oneplus-3/how-to/official-android-9-community-beta-t3922319 , Thanks @abhibnl for Sharing the Rom.
3.After Flashing DON'T REBOOT, Flash This
https://drive.google.com/file/d/1kV8JhENmqrGc5zL0vAr3xmvXg_wriX0O/view?usp=sharing
4.Flash Magisk 19 If you want root.
I Recommend custom kernel for OOS PIE made by @mcdachpappe link to thread: https://forum.xda-developers.com/on...-development/kernel-renderzenith-mcd-t3838788
Then you can Reboot and Enjoy your Pie Rom. It will Boot up Much Faster.
Proof:
https://youtu.be/vc-Uy9Xto7k
Click to expand...
Click to collapse
I tried this method and I have been stuck on boot for over three hours. I am going to roll back to official OOS 5.0.8 then perform the upgrade.
@op
Your step 2 is confusing. This isn't the official community beta you flashed as per your YouTube video.
Rajesh_m said:
@op
Your step 2 is confusing. This isn't the official community beta you flashed as per your YouTube video.
Click to expand...
Click to collapse
I tried on official community beta too its working, the reason i am using this rom (https://forum.xda-developers.com/oneplus-3/development/rom-theone3os-v1-0-ob37-v1-0-5-0-3-t3798911) is because i can debloat some unwanted apps and flash custom kernel.
on Official community beta you cannot flash Custom kernel because of not enough free space.
Rafeh said:
I tried on official community beta too its working, the reason i am using this rom (https://forum.xda-developers.com/oneplus-3/development/rom-theone3os-v1-0-ob37-v1-0-5-0-3-t3798911) is because i can debloat some unwanted apps and flash custom kernel.
on Official community beta you cannot flash Custom kernel because of not enough free space.
Click to expand...
Click to collapse
So you are sure this method works with official community beta too on top of custom pie rom?
Yes 100% sure
Also i saw you didn't selected the option no-verity. Were your device encrypted? Mine is decrypted though.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Related
CLOSED PER OP REQUEST
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download:
DOWNLOAD Official
Kernel source:
Source
Selinux Status:
Enforcing
MAJOR BUGS:
?
flash on your own risk.
FLASHING
First Time:
First Time:
update fastboot and adb ( https://developer.android.com/studio...platform-tools )
download twrp
fastboot boot twrp-blabla.img
flash rom zip
DO NOT FLASH ANYTHONE ELSE AT THIS POINT!
reboot to bootloader
fastboot boot twrp-blabla.img again
flash open gapps nano (ONLY GAPPS NANO ARE CURRENTLY SUPPORTED
reboot
Updating: (WILL WORK ONCE OFFICIAL)
Use OTA inside rom for updates. nano gapps backup included.
if you flash an update in twrp theb reflash gapps
if u did something else. we dont need/wanna know about it in the thread
May the force be with you
Device Maintainers
@vache, @darkobas,
@maxwen
XDA:DevDB Information
Omnirom, ROM for the OnePlus 6
Contributors
darkobas, darkobas, maxwen, vache
Source Code: [url]https://github.com/omnirom/android_kernel_oneplus_sdm845[/URL]
ROM OS Version: 10
ROM Kernel: Linux 4.x
Version Information
Status: Stable
Created 2018-09-13
Last Updated 2018-10-15
Addon:
OOS Camera (flashable zip)
OOS camera with portrait mode. of course it doesnt break other cams or apps like other roms.
So this rom doesn't have the same bugs ( video recording and MTP ) as LineageOS 16?
Do we need to be on OxygenOS Beta 2 before flashing this?
EDIT
Tried to flash the rom coming from OOS Beta 2 but it wouldn't boot.
Instead it would switch to the other slot and boot into OOS.
The Marionette said:
So this rom doesn't have the same bugs ( video recording and MTP ) as LineageOS 16?
Do we need to be on OxygenOS Beta 2 before flashing this?
Click to expand...
Click to collapse
of course.
on both slots please
Nice. New rom to play
darkobas said:
of course.
on both slots please
Click to expand...
Click to collapse
I had OOS B2 on both slots but after flashing Omni it would enter a black screen for a bit, reboot and enter OOS ( my guess is that the slot with Omni is broken so it switched to the other one ) .
Can anyone else confirm this?
Great to see it on OnePlus 6 Patiently waiting for 1+5T relase
The Marionette said:
I had OOS B2 on both slots but after flashing Omni it would enter a black screen for a bit, reboot and enter OOS ( my guess is that the slot with Omni is broken so it switched to the other one ) .
Can anyone else confirm this?
Click to expand...
Click to collapse
i guess its /data problem, u didnt wipe it
darkobas said:
i guess its /data problem, u didnt wipe it
Click to expand...
Click to collapse
Yeah, it's my habit to perform a factory reset before flashing any rom and I did it this time too.
Did you successfully boot it on your device?
Awesome.. Omni Pie thank you dev
If your on any other security patch then august your going to need to Format Data.
joemossjr said:
If your on any other security patch then august your going to need to Format Data.
Click to expand...
Click to collapse
I tried even flashing the beta 2 on both slots and flashing omni after those but the result was the same. I think the zip may be bad or there's something else which needs to be done.
The Marionette said:
I tried even flashing the beta 2 on both slots and flashing omni after those but the result was the same. I think the zip may be bad or there's something else which needs to be done.
Click to expand...
Click to collapse
Flash ob2 flash twrp reboot recovery then Flash ob2 then twrp again reboot recovery Flash omni then twrp reboot recovery. Flash gapps and magisk 17.1(optional) format data. Boot
Some Screenshots:
It's August security patch..so make sure you FORMAT data after installing..else you will boot back to twrp
september will be up later
https://drive.google.com/file/d/1hwZO8021d1CenojHIMGcX51JwdxW2I2R/view?usp=drivesdk OOS beta 2 camera from @darkobas to use portrait open up stock cam for omni close it long press on OOS cam chose portrait profit.
Not work, after first flash omni and twrp i reboot and its boot only in fastboot now. No recovery or os booting. This rom have a big issues. Its better wait for next build.
PEBCAK
SpectraFun said:
Not work, after first flash omni and twrp i reboot and its boot only in fastboot now. No recovery or os booting. This rom have a big issues. Its better wait for next build.
Click to expand...
Click to collapse
You have to flash beta 2 to both slots the ROM doesn't have issues its user error.
joemossjr said:
https://drive.google.com/file/d/1hwZO8021d1CenojHIMGcX51JwdxW2I2R/view?usp=drivesdk OOS beta 2 camera from @darkobas to use portrait open up stock cam for omni close it long press on OOS cam chose portrait profit.
Click to expand...
Click to collapse
Thanks the camera is working well. I haven't tested everything yet.
---------- Post added at 03:48 PM ---------- Previous post was at 03:44 PM ----------
Thanks @darkobas I'm impressed with the rom.
To those complaining that it doesn't work, if you follow the steps to prepare before flashing then it will work
OnePlus 7 Open Beta for OnePlus 6!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
(time to update pic..)
Features:
Stock OnePlus 7 OxygenOS Open Beta 12 / Android 10 Firmware
Debloated
Automated Flasher
Decrypted
Performance tweaks
Full GCam7 Support
What works:
Almost everything, check bugs!
Auto rotation works (Thanks to Marlon for telling me!)
What doesn't work / Bugs:
Dolby
Notch Hiding in Settings.
Use MagiskHide 7 Pro (10) module to get certified (Netflix) (This may no longer be needed)
How to Install:
Make sure You're on OOS Open Beta Q or H2OS Q for Android 10 and OB22 for Pie.
Note: Backup Your nudes before flashing the rom!.
Boot TWRP
Flash Open Beta Q OTA.zip
Reboot to fastboot
Run flasher.bat
After it will finish flashing, Your phone will automatically reboot into OOS.
Once You go through SetupWizard You can boot into TWRP (which is built in) and root etc.
If You were on previous build, use dirty flasher.
Check screenshots in attached images!
Download:
OnePlus7 - Open Beta 12 V3 for OnePlus6 - Apr23
Old Pie Build (link may stop working)
OnePlus7 Pro for OnePlus 6 9.5.9 July 11
Warning! DO NOT flash OP7 OTA's! They may brick Your phone! If You end up flashing one anyway, just use EDL mode or fastboot to go back to stock firmware.
If You have any other problems, just ask here on XDA or for the fastest support PM me or ask someone in my group on Telegram
Join my group!
If You want to motivate me to work more, buy me a coffee!
https://www.paypal.me/protodevnano
Credits:
engstk for his amazing TWRP
fullofhell for firmware
Mauronofrio for 7T firmware
erfanoabdi for vendor patcher idea.
FunkWizard/OnePlus for latest firmwares!
OnePlus for creating OP6!
My friend Dylan for always supporting me
If I forgot anyone, just PM me on Telegram!
XDA:DevDB Information
[ROM][PORT][9.0.0] OnePlus 6T Port for OnePlus 6 [06.11.18], ROM for the OnePlus 6
Contributors
ProtoDeVNan0
Source Code: https://github.com/OnePlusOSS/android_kernel_oneplus_sdm845
ROM OS Version: 10.x
ROM Kernel: Linux 4.x
ROM Firmware Required: OxygenOS Open Beta Q or newer firmware
Based On: OOS
Version Information
Status: Stable
Created 2018-11-06
Last Updated 2018-11-06
Thank you for your work. Could you sum up what features do we get from this?
Also, do you think eventually you'll make a simple to flash in twrp to make it easier to install?
Tomatot- said:
Thank you for your work. Could you sum up what features do we get from this?
Also, do you think eventually you'll make a simple to flash in twrp to make it easier to install?
Click to expand...
Click to collapse
+1
Tomatot- said:
Thank you for your work. Could you sum up what features do we get from this?
Also, do you think eventually you'll make a simple to flash in twrp to make it easier to install?
Click to expand...
Click to collapse
New AOD, Live Wallpapers, New Dialer, New Messages App, some of the stuff that You can see in screenshots (OnePlus Laboratory etc). One more year of firmware updates (6T was launched with Pie).
And all features that OP6T will get in future updates that OP6 might not get.
And if You want, You can install it with TWRP. Just use flash image instead of flash zip. And then flash system.img to system, boot.img to boot and OP6T Vendor Patcher and that's it!
Edit: here's a video https://youtu.be/7pxkqAYylWE. You can skip flashing op6t vendor patcher and vbmeta. Those steps are most likely optional because it's OxygenOS.
Thanks developer .You are unique and thanks for trying new stuffs on OP6 . Waiting for MIUI 10 stable plzzzz work on it .
People don't flash this it's not working!!!
Can confirm the same. Wiped data through TWRP, but it said No OS installed. Also tried through fastboot, but it gave back an "Invalid size/header" error.
ProtoDeVNan0 said:
One more year of firmware updates (6T was launched with Pie).
Click to expand...
Click to collapse
1+ updates their smartphones equally
ProtoDeVNan0 said:
And all features that OP6T will get in future updates that OP6 might not get.
Click to expand...
Click to collapse
Via ota?
Not working..stuck in bootloader screen
biku123 said:
Not working..stuck in bootloader screen
Click to expand...
Click to collapse
You're in pie estable or beta before flash this rom?
Toni Moon said:
You're in pie estable or beta before flash this rom?
Click to expand...
Click to collapse
I am on stable 0S 9.02
Toni Moon said:
You're in pie estable or beta before flash this rom?
Click to expand...
Click to collapse
Pie stable
Sent from my [device_name] using XDA-Developers Legacy app
Thanks developer .
Downloading....
anasmhds said:
Thanks developer
Downloading....
Click to expand...
Click to collapse
doesnt work.
---------- Post added at 11:58 AM ---------- Previous post was at 11:53 AM ----------
I am on oos 9.02 i have downloaded the port. Then i flash TWRP to check the current slot. After that i flash system img using fastboot command .After flashing system img Phone become unresponsive so i again booted to boot-loader and flash vbmeta.img and boot.img then i again flash twrp and flash vendor patch .After reboot either phone goes to crashdump or stay on bootloader unlock warning screen??? any suggestiom
I have seen that its quite hard to install this ROM, the same kind of issues was also in pixel 3xl port, can't we get some simplified installation method just like other custom roms????
Will this erase all data in memory?
manudhomra said:
I have seen that its quite hard to install this ROM, the same kind of issues was also in pixel 3xl port, can't we get some simplified installation method just like other custom roms????
Click to expand...
Click to collapse
ya bro i have flashed more than five times.My wholeday wasted on this rom
some experience from myself.
1: Back up your application and data through Ti Backup
2: download the stock fast boot ROM of OOS
3: boot into bootloader and flash the stock OOS
4: when you done it, just get your ass back in the bootloader and flash the 6t's system IMG into SLOT A!
and the last thing just following the instructions.
One little problem is the system interface does not occupy the entire screen
Raymond.William said:
some experience from myself.
1: Back up your application and data through Ti Backup
2: download the stock fast boot ROM of OOS
3: boot into bootloader and flash the stock OOS
4: when you done it, just get your ass back in the bootloader and flash the 6t's system IMG into SLOT A!
and the last thing just following the instructions.
One little problem is the system interface does not occupy the entire screen
Click to expand...
Click to collapse
Only on Slot A?
And are we supposed to flash it only the system img and not other ones?
AndroidSword said:
Only on Slot A?
And are we supposed to flash it only the system img and not other ones?
Click to expand...
Click to collapse
and follow the thread creator's instruction. such as flash vbmeta etc
---------- Post added at 05:28 PM ---------- Previous post was at 05:23 PM ----------
AndroidSword said:
Only on Slot A?
And are we supposed to flash it only the system img and not other ones?
Click to expand...
Click to collapse
Sorry I misunderstood that you asked me next step how to do. Cause you flash the stock OOS ROM. So it should be in slot A
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Android OS version: 9.0.0_r45
For devices: OnePlus 6 (enchilada)
Authors build: @adityajadaun
Source code: https://github.com/nitrogen-project
Developers: xyyx, wight554
Thanks: darkobas, ezio84, beanstown106, maxwen, SyCreed and etc.
Google Apps: Open GAPPS
Recovery: TWRP
Based on AOSP
xyyx (Max) - main developer
Recommended TWRP: blu_spark (search filenames starting with 'twrp-*')
Backup all your data (Important)
Make sure you have latest OOS Stable/ Beta installed on both A and B slots! Rom will not boot with Oreo firmware
Wipe System, Data, Dalvik Cache (if coming from another rom)
Flash rom zip followed by Twrp installer zip
Reboot recovery
Flash gapps
Flash Magisk (if u want root access)
Reboot system and Enjoy !
ROM: Nitrogen-OS-P-enchilada-20190711 (OFFICIAL)
Note: Flashing GApps after flashing ROM is required becoz I use GCam as inbuilt app which requires Google Play Services.
GApps: OpenGApps
Nitrogen Project: https://github.com/nitrogen-project
Kernel Source: https://github.com/mTresk/android_kernel_oneplus_sdm845
Known Bugs:
* ??
XDA:DevDB Information
[ROM][9.0.0_r21][Oneplus 6] ► Nitrogen OS ◄ [UNOFFICIAL][02/01/2019], ROM for the OnePlus 6
Contributors
@adityajadaun, xyyx
ROM OS Version: 9.0.0 Pie
ROM Kernel: Linux 4.x
ROM Firmware Required: OOS Pie firmware
Created 2019-01-02
Last Updated 2019-07-11
Broo we know on this rom, in a section OP6. Soo don't post this when u not a mein dev. [emoji2936][emoji2935]
Araa01 said:
Broo we know on this rom, in a section OP6. Soo don't post this when u not a mein dev. [emoji2936][emoji2935]
Click to expand...
Click to collapse
bro i know that there is already a nos thread but sakindia123 leave that thats why i recontinue it
Link please !
iTalisman said:
Link please !
Click to expand...
Click to collapse
Bro check first post, download link is active now
adityajadaun said:
Bro check first post, download link is active now
Click to expand...
Click to collapse
Thanks a bunch !
And your firmware recommendation? Stable or OB?
Thank you :good:
What's the changelog?
Hydrogen -> Oxygen -> Nitrogen
metaxda said:
Hydrogen -> Oxygen -> Nitrogen
Click to expand...
Click to collapse
for some reason rom isnt booting have tried everything...any fix for this this????
Aduser345 said:
for some reason rom isnt booting have tried everything...any fix for this this????
Click to expand...
Click to collapse
In your case, no. You haven't provided enough information for anyone to be able to help.
Cablespider said:
In your case, no. You haven't provided enough information for anyone to be able to help.
Click to expand...
Click to collapse
well have followed the full steps clearly
flashing open beta on both slots
and doing factory reset and flashing the rom
then rebooting the device and flashing gapps with magisk
doing somthing wrong???
it just gets stuck on the boot animation and nothing happens for a long time tried wiping data still no luck
Did you install it like this?
MAKE SURE YOU'RE USING ONLY blu_spark TWRP
Boot into TWRP
Flash OxygenOS zip
Flash TWRP Installer
Reboot to recovery
Flash OxygenOS zip again
Flash TWRP Installer
Reboot to recovery
Flash ROM
Wipe Data and Cache
DO NOT WIPE SYSTEM!!!!!
Flash TWRP Installer
Reboot to Recovery
Flash OpenGApps and Magisk
Click to expand...
Click to collapse
Cablespider said:
Did you install it like this?
Click to expand...
Click to collapse
yes doesnt boot
Aduser345 said:
yes doesnt boot
Click to expand...
Click to collapse
Bro it boots on ob (1 - 8) as well as on stable (9.0 - 9.0.2)
I say this becoz i personally tested on these all firmwares
Just fastboot any pie firmware from those which mentioned above
Then fastboot twrp recovery
Then in twrp wipe data, system, dalvik cache
Then flash rom and twrp zip
Then reboot to recovery again and flash gapps, magisk if u want
Then reboot
adityajadaun said:
Bro it boots on ob (1 - 8) as well as on stable (9.0 - 9.0.2)
I say this becoz i personally tested on these all firmwares
Just fastboot any pie firmware from those which mentioned above
Then fastboot twrp recovery
Then in twrp wipe data, system, dalvik cache
Then flash rom and twrp zip
Then reboot to recovery again and flash gapps, magisk if u want
Then reboot
Click to expand...
Click to collapse
will try later i have to set up device after i lost all my data in the process(even the twrp backup)
What kernel is this rom using? Can share gpu rendering graph?
Great fluid build. Using it currently. Running it with Blue Spark kernel on OOS 9.0.2 base.
Found 3 bugs inline with my usage pattern.
1. System dark mode doesnt change but applying dark mode in developer settings makes the quick settings dark.
2. Barcode scanners cannot focus at all.
3. Notification lights does not light up after a missed call/message recieved.
Can you add the option of pulling down Quick settings from right/left swipe down?
Does google camera work?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
*** Disclaimer
I am not responsible for any damage you made to your device
You have been warned
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today
Features:
https://github.com/crdroidandroid/crdroid_features/blob/10.0/README.mkdn
Flashing Instructions:
Pre-installation:
TWRP (Download from here)
gapps (Download from here)
Magisk 20.0 or newer for root (after first boot) - (Download from here)
First time installation:
step 1
Download Rom and Gapps, Root solution if aplicable
Wipe /system, /data, /cache and dalvik (internal storage is optional)
Flash Rom, Root solution if any, then gapps
Reboot
Update installation:
step 1
Download Rom and Gapps, Root solution if aplicable
Wipe /system, /cache and dalvik
Flash Rom, Root solution if any, then gapps
Reboot
Sources:
ROM: https://github.com/crdroidandroid
Kernel: Complete victara tree
Download:
ROM Sourceforge
Known issues:
None
Visit official website @ crDroid.net
crDroid Victara Telegram
crDroid Community Telegram
Donate to help our team pay server costs
Reserved
We now move this work to Android 10 - Keep with us
What is working:
Almost everithing needed for daily use
Whats is not:
DRM dependant appss (like Netflix)
Selinux permissive
Great job! twrp 3.31 ended with error 7, so where can we find and download twrp for this rom of Android 10?
starspig said:
Great job! twrp 3.31 ended with error 7, so where can we find and download twrp for this rom of Android 10?
Click to expand...
Click to collapse
Wich variant? It has to be good with 3.2 above...
jeferson1979 said:
Wich variant? It has to be good with 3.2 above...
Click to expand...
Click to collapse
Victara 32G, the similar error when updating Nexus7 2013, maybe it's the problem of partition. By useding repatition tool, I updated nexus7 to Android10 successfully, but there is no twrp for victara of android10.
https://forum.xda-developers.com/ne...repartition-nexus-7-2013-repartition-t3844386
https://forum.xda-developers.com/nexus-7-2013/development/rom-lineageos-17-1-t4038425
starspig said:
Victara 32G, the similar error when updating Nexus7 2013, maybe it's the problem of partition. By useding repatition tool, I updated nexus7 to Android10 successfully, but there is no twrp for victara of android10.
https://forum.xda-developers.com/ne...repartition-nexus-7-2013-repartition-t3844386
https://forum.xda-developers.com/nexus-7-2013/development/rom-lineageos-17-1-t4038425
Click to expand...
Click to collapse
Its the same for pie or oreo, even nougat supported
OP Updated:
Selinux enforcing
Download
Great ROM, great job jef..
@jeferson1979,
infinite loop ...
clean installation !!!
does it have to do with the file system?
I'm using Ext4 ...
I had the same problems when trying to install the lineage and AOSP 9.0 ROMs,
punk-77 said:
@jeferson1979,
infinite loop ...
clean installation !!!
does it have to do with the file system?
I'm using Ext4 ...
I had the same problems when trying to install the lineage and AOSP 9.0 ROMs,
Click to expand...
Click to collapse
You must be aware to use f2fs for /data, ext4 for system.
jeferson1979 said:
You must be aware to use f2fs for /data, ext4 for system.
Click to expand...
Click to collapse
making the necessary changes ...
on average how many minutes does the first reboot take ???
persisting I will return to the previous version ...
punk-77 said:
making the necessary changes ...
on average how many minutes does the first reboot take ???
persisting I will return to the previous version ...
Click to expand...
Click to collapse
No more than 5 minutes. I highly recommend bitgapps at this moment also. Flash ROM, magisk and after, bitgapps.
If u want to use opengapps, flash Rom, opengapps then reboot. Setup and reboot to TWRP and flash magisk
jeferson1979 said:
No more than 5 minutes. I highly recommend bitgapps at this moment also. Flash ROM, magisk and after, bitgapps.
If u want to use opengapps, flash Rom, opengapps then reboot. Setup and reboot to TWRP and flash magisk
Click to expand...
Click to collapse
I use the pico opengapps ...
this on the startup screen for about 15 minutes ...
did not work... flashed the Havoc ROM ...
punk-77 said:
did not work... flashed the Havoc ROM ...
Click to expand...
Click to collapse
Some more info, the device variant
jeferson1979 said:
Some more info, the device variant
Click to expand...
Click to collapse
the ROM does not leave the boot screen ... I had the same problems with the Lineage and Aosp ROMs, with android 9.0 with Havoc without problems at first
@jeferson1979
ROM installed !!!
it worked with bitgapps only ...
gestures to wave and turn on the screen are working?
punk-77 said:
@jeferson1979
ROM installed !!!
it worked with bitgapps only ...
gestures to wave and turn on the screen are working?
Click to expand...
Click to collapse
Is good to know. Anyway, when you face some issue, grab a log with some app, like matlog or something and share here. Ping me as it needed
jeferson1979 said:
Is good to know. Anyway, when you face some issue, grab a log with some app, like matlog or something and share here. Ping me as it needed
Click to expand...
Click to collapse
the google backup option does not work ...
shows that it is enabled, but it doesn't work!
viper4android doesn't work on this ROM either.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LegionOS for Realme 5 Pro/Q [RMX1971]
Code:
* Your warranty is now void.
* We are not responsible for anything that may happen to your phone by installing any custom ROMs and/or kernels.
* You do it at your own risk and take the responsibility upon yourself and you are not to blame us or XDA and its respected developers.
What is this?
LegionOS is an AOSP based ROM
Our mission is to offer the maximum possible stability and security, along with essential and useful features for the proper functioning of the device
Based on Android 11
Whats working?
Wi-Fi
RIL
Mobile data
GPS
Camera
Flashlight
Camcorder
Bluetooth
FM radio
Fingerprint reader
Face unlock
NFC
Lights
Sound/vibration
CLEAN FLASH :
Download the latest build and GApps (optional)
Reboot to recovery
Make nandroid backup ( optional)
Wipe System, Data, Cache, Dalvik
Flash the latest build and GApps(on non Gapps build if needed)
Reboot to slot A (B if on A | A if on B) {ONLY FOR A/B PARTITION DEVICES}
Reboot
DIRTY FLASH :
Download the latest build (gapps or non Gapps)
Reboot to recovery
Flash the latest build
Change Slot {ONLY FOR A/B PARTITION DEVICES}
Wipe Cache
Reboot
Note: GApps only has to be flashed once and on non gapps buildwhereas Magisk/Su is to be flashed every time you Dirty Flash the OTA Update.
Known issues
Nothing yet
You tell me
Download Link
SourceForge
Telegram Groups
Our Telegram channel
Our Telegram Group
Support Group
Android OS version: 11
Security patch level: February 2021
Build author/Device Maintainer: LuckYVii
Device Source code: https://github.com/luckYViii
Source code: https://github.com/Project-LegionOS
ROM Developer: RajKale
Hello!
Wow this is amazing. We are starting to have Android 11 an our Realme 5 Pro.
I really want to flash your ROM and try it.
Can you provide a checklist of known bugs? Or what is working and what is not. That would be amazing.
Thanks for the hard work!
Best Regards
Richy1989 said:
Hello!
Wow this is amazing. We are starting to have Android 11 an our Realme 5 Pro.
I really want to flash your ROM and try it.
Can you provide a checklist of known bugs? Or what is working and what is not. That would be amazing.
Thanks for the hard work!
Best Regards
Click to expand...
Click to collapse
Everything working
And there new update
Will jump to 3.3 with amazing features and fix's
Just wait
Is there any problem to flash this rom as it is android 11.can we go back to android 10 after flash this rom
adamnp2000 said:
Is there any problem to flash this rom as it is android 11.can we go back to android 10 after flash this rom
Click to expand...
Click to collapse
Yes u can back to android 10 after flash android 11
Through normal flash or difficult like fastboot
adamnp2000 said:
Through normal flash or difficult like fastboot
Click to expand...
Click to collapse
Normal flash from TWRP
Magisk
Does magisk work?
Richy1989 said:
Does magisk work?
Click to expand...
Click to collapse
Same question??
Yes magisk working can check my group there working one on a11
New Version Available!(v.3.3) & Download link has been updated
Changelog
November security patch
kernel rebranded to Galactiメ
Upstream kernel 4.9.241
All issue audio fixed
Improved app opening speed
Fixed Ui shutters
Update OpenGL V464 Rev2 and Vulkan 1.1.128
Implemented Dirac Audio for better music experience
Many more underhood changes to make the experience better
Include Gcam GO Edition with night mode
Installed initial version, it just booted to fastboot mode after installing and had to restore previous backup. Does data need to be formatted first??
Spaceboy60 said:
Installed initial version, it just booted to fastboot mode after installing and had to restore previous backup. Does data need to be formatted first??
Click to expand...
Click to collapse
Clean flash recommend
LuckYViii said:
Clean flash recommend
Click to expand...
Click to collapse
I did a clean flash. When I restored the previous backup, I meant after I couldn't boot the clean flash of your ROM, I restored the backup up of my previous ROM otherwise I'd be stuck at the fastboot screen permanently.
I wiped data, system, vendor, caches etc first before flashing the ROM
Doesn't boot if magisk v21 is installed. Anyone have any luck rooting the ROM?
No exfat support so can't use my sd card ( nearly 2021 and occasionally you'll find a ROM like this that still doesn't include this, strange) . No 2 button navigation mode option which is annoying too
Spaceboy60 said:
Doesn't boot if magisk v21 is installed. Anyone have any luck rooting the ROM?
Click to expand...
Click to collapse
Lol all a11 roms will not booted with 20.4 magisk
There 1 method only
Flash magisk canary
Then magisk 21.0
Installation Guide & Bug Report
Do we need to flash the realme ui firmware prior flashing this update, like we used to do for pixel experience roms and others or simply flash the legion OS, please post the step by step guide. One more thing is this rom used as a daily driver ,does anyone has reported any bug or so. please respond. i would also like to now whether this rom got monthly updates and tweaks.
Thanks!
Robstir said:
Yeah no ExFat support is weird and sad, as the ROM is excellent but the system file is about 5gb so you can't back it up let alone a whole backup! LuckYvii's work is usually great, can the next update support ExFat?
Click to expand...
Click to collapse
yes sure give me some logs for help me
Hi guys.
I installed this ROM 2 weeks ago, and this is a wonderfull rom.
No gapps for me. It was a pretty difficult in beginning, but now the rom give me its all theses capacities.
No exfat => ok, sdcard formated
Magisk installed
The unlock face doesn't work corectly, so i use the finger print.
The many legion settings are very nice to customize the phone.
No bug for me
Thank's for the job