Related
Oneplus has Screwed a lot of things between 3.5.2 AND 3.2.6..!! I wanted to try newest version of RR released by Blackjubel. But had issues.
Took me 5 minutes figure out things and decided to share it here:
IMPORTANT POST..!!! READ..!!! Credit for firmware files to @davidxantos
For people coming from 3.5.2 or 3.2.6
I am making a very important post. This is meant for all those who are using latest community build of Oneplus 3 and want to try another rom. You will not be able to do so as the twrp you are using will not flash roms completely and the firmware of community build will not let you flash the latest build of twrp. So here is what you need to do.
READ CAREFULLY:
STEP 1 : Grab firmware for 3.2.6 from this link and flash. flashing this will BREAK your fingerprint sensor. WAIT read on.
https://drive.google.com/…/0ByD3oqJ_...0;/view…
STEP 2: Now flash latest twrp 3.0.2.1 . Now you are on the latest twrp.
STEP 3: Now Flash firmware for 3.2.4 from this link. YOU HAVE your finger print sensor back..!
https://drive.google.com/…/0ByD3oqJ_...0;/view…
Now you have the latest twrp again and also can flash anything you want to..!!
Thanks to Oneplus for screwing this..!
Thanks but 3. 2.6 files do not found
No link works!
Just go find another link if these here don't work ...
There is a thread with all official firmwares. Or just use Google.
Sent from my OnePlus 3 using Tapatalk
3.2.4 https://drive.google.com/file/d/0ByD3oqJ_uj0VWjVMbmZoZS1kejg/view
3.2.6 https://drive.google.com/file/d/0ByD3oqJ_uj0VZUFjblBSbEVNRGs/view?usp=sharing
XDA app screwed the links
I tried but i bricked the phone. I cani only restore with the Qualcomm tool but now im stuck on the oxygen 3.1.2 and every time that flash any rom or OTA i brick the phone
gelomc said:
I tried but i bricked the phone. I cani only restore with the Qualcomm tool but now im stuck on the oxygen 3.1.2 and every time that flash any rom or OTA i brick the phone
Click to expand...
Click to collapse
This is strange..
gelomc said:
I tried but i bricked the phone. I cani only restore with the Qualcomm tool but now im stuck on the oxygen 3.1.2 and every time that flash any rom or OTA i brick the phone
Click to expand...
Click to collapse
Could it be that your bootloader is now locked again after using the unbrick tool?
DavidXanatos said:
Could it be that your bootloader is now locked again after using the unbrick tool?
Click to expand...
Click to collapse
No it's unlocked i checked
---------- Post added at 08:39 PM ---------- Previous post was at 08:38 PM ----------
geekynoob said:
This is strange..
Click to expand...
Click to collapse
I know...
I was on 3.2.6 after the OTA. I installed TWRP 3.0.2.1 and re-rooted it. I then took a backup and proceeded to flash RR 5.7.4. Broken fingerprint scanner/home button.
First, does anyone know why this happens? Can it be fixed?
In the meantime, do we need to revert to 3.2.4 to be able to install other roms and not break the the fps/hb?
Can anyone point me to a TWRP flashable version of 3.2.4? <-- Got this, Thanks.
Thanks in advance.
Edit to add below
I did what was detailed in the OP from stock rooted 3.2.6. I flashed the 3.2.6 firmware from TWRP. Rebooted to bootloader. Flashed TWRP 3.0.2.1 via fastboot. Flashed 3.2.4 firmware from TWRP. FPS/HB broken.
Did I miss something?
Reflashed 3.2.6 firmware on a hunch. FPS/HB working again.
My goal is to get to RR 5.7.4 with a working FPS/HB. Any ideas?
Thanks again.
EdHicks said:
I was on 3.2.6 after the OTA. I installed TWRP 3.0.2.1 and re-rooted it. I then took a backup and proceeded to flash RR 5.7.4. Broken fingerprint scanner/home button.
First, does anyone know why this happens? Can it be fixed?
In the meantime, do we need to revert to 3.2.4 to be able to install other roms and not break the the fps/hb?
Can anyone point me to a TWRP flashable version of 3.2.4? <-- Got this, Thanks.
Thanks in advance.
Edit to add below
I did what was detailed in the OP from stock rooted 3.2.6. I flashed the 3.2.6 firmware from TWRP. Rebooted to bootloader. Flashed TWRP 3.0.2.1 via fastboot. Flashed 3.2.4 firmware from TWRP. FPS/HB broken.
Did I miss something?
Reflashed 3.2.6 firmware on a hunch. FPS/HB working again.
My goal is to get to RR 5.7.4 with a working FPS/HB. Any ideas?
Thanks again.
Click to expand...
Click to collapse
It's easy mate..
Flash rr and then flash the 3.2.4 fw.. As u have a good twrp now.. Simple..
geekynoob said:
Oneplus has Screwed a lot of things between 3.5.2 AND 3.2.6..!! I wanted to try newest version of RR released by Blackjubel. But had issues.
Took me 5 minutes figure out things and decided to share it here:
IMPORTANT POST..!!! READ..!!! Credit for firmware files to @davidxantos
For people coming from 3.5.2 or 3.2.6
I am making a very important post. This is meant for all those who are using latest community build of Oneplus 3 and want to try another rom. You will not be able to do so as the twrp you are using will not flash roms completely and the firmware of community build will not let you flash the latest build of twrp. So here is what you need to do.
READ CAREFULLY:
STEP 1 : Grab firmware for 3.2.6 from this link and flash. flashing this will BREAK your fingerprint sensor. WAIT read on.
https://drive.google.com/â?¦/0ByD3oqJ_...0;/viewâ?¦
STEP 2: Now flash latest twrp 3.0.2.1 . Now you are on the latest twrp.
STEP 3: Now Flash firmware for 3.2.4 from this link. YOU HAVE your finger print sensor back..!
https://drive.google.com/â?¦/0ByD3oqJ_...0;/viewâ?¦
Now you have the latest twrp again and also can flash anything you want to..!!
Thanks to Oneplus for screwing this..!
Click to expand...
Click to collapse
In short, we cannot flash official twrp via modified twrp? Can't we just flash 3.2.4 without flashing 3.2.6 firmware?
z31416 said:
In short, we cannot flash official twrp via modified twrp? Can't we just flash 3.2.4 without flashing 3.2.6 firmware?
Click to expand...
Click to collapse
Nice u will get a black screen..
geekynoob said:
Nice u will get a black screen..
Click to expand...
Click to collapse
Thanks for this. I'm about to flash 3.2.4 fw only.
Good thing I saw this thread.
So step by step procedure if we wamt to flash other roms are:
-reboot to recovery (modifoed twrp)
-wipe
-flash 3.2.6 fw via modified twrp
-flash/install official twrp.img
-flash 3.2.4 fw
-flash rom etc
-finally reboot?
i'm using multi rom with FOS 1.5.1 as primary and whenever i flash RR(Flashing 3.2.4 firmware before and after too) and custom rom, FPS/home button not recognised.
what am i doing wrong, although multirom does have individual space why cant the older firmware doesnt work. everything except the home button is working fine.
can anyone explain how it works.
z31416 said:
Thanks for this. I'm about to flash 3.2.4 fw only.
Good thing I saw this thread.
So step by step procedure if we wamt to flash other roms are:
-wipe
-flash 3.2.6 fw via modified twrp
-flash/install official twrp.img
-flash 3.2.4 fw
-flash rom etc
-finally reboot?
Click to expand...
Click to collapse
Modded twrp can be used to flash 3.2.6 or 3.5.2 oos.. Now if u want to go back.. Using the modded twrp flash the 3.2.4 files.. Just reboot recovery now flash non modded twrp as u have 3.2.4 files official twrp will work.. And then flash any rom u want..
green. said:
i'm using multi rom with FOS 1.5.1 as primary and whenever i flash RR(Flashing 3.2.4 firmware before and after too) and custom rom, FPS/home button not recognised.
what am i doing wrong, although multirom does have individual space why cant the older firmware doesnt work. everything except the home button is working fine.
can anyone explain how it works.
Click to expand...
Click to collapse
Multi rom cannot distinguish firmware files.. They are core files.. So fp won't work..
geekynoob said:
Multi rom cannot distinguish firmware files.. They are core files.. So fp won't work..
Click to expand...
Click to collapse
okay, so the developer have to include the firmware in their roms in future build, thats how it works, right?
and while experimenting i flashed OOS 3.2.4 firmware but FPS working fine in FOS 1.5.1. how come it is?
z31416 said:
Thanks for this. I'm about to flash 3.2.4 fw only.
Good thing I saw this thread.
So step by step procedure if we wamt to flash other roms are:
-reboot to recovery (modifoed twrp)
-wipe
-flash 3.2.6 fw via modified twrp
-flash/install official twrp.img
-flash 3.2.4 fw
-flash rom etc
-finally reboot?
Click to expand...
Click to collapse
This will do it. It's how I got going. I went from stock rooted 3.2.6 OOS to RR 5.7.4.
Thanks for putting to words for others.
green. said:
okay, so the developer have to include the firmware in their roms in future build, thats how it works, right?
and while experimenting i flashed OOS 3.2.4 firmware but FPS working fine in FOS 1.5.1. how come it is?
Click to expand...
Click to collapse
I've done a bit of Dev.. But i am not sure about ur statement.. .. And cm based roms don't have fw files.. Feel like a noob lol..
Hey,
TWRP 3.1.1 Touch Recovery beta version is released for Xiaomi Mi A1.
Download - Go to downloads tab
Update:
1. Magisk v13.4 is working fine.
Workaround for Xposed:
Xposed is not installing through TWRP and when tried with App, still it's giving errors. So below is the temporary solution till we get a permanent one.
1. Don't flash TWRP. Just boot into it from bootloader by using command - fastboot boot recovery_name.img
2. Flash latest SuperSU zip.
3. Reboot to System.
4. Your phone will be rooted now and install Xposed through app.
Important:
1. Don't flash it, just boot into it.
2. If flashed, re-flash the latest stock boot image.
Instructions:
1. Download the twrp image and twrp installer zip
2. fastboot boot twrp-3.1.1-tissot-beta.img
3. Flash twrp-installer-tissot-3.1.1.zip
4. Reboot to recovery
Flash Magisk v13.4 built for Pixel devices by @Goodwin_c. Available in the downloads tab.
Issues:
1. Flashing SuperSU will break TWRP. SuperSU will work, but TWRP will be gone.
2. Xposed won't flash without modification.
Future update:
1. Make TWRP and SuperSU to co-exist
2. Compatibility with Xposed and Latest Magisk
Disclaimer:
We are not responsible for anything that may happen to your phone as a result of installing custom recoveries, roms and/or kernels. you do so at your own risk and take the responsibility upon yourself.
XDA:DevDB Information
TWRP 3.1.1 for Mi A1, Tool/Utility for the Xiaomi Mi A1
Contributors
mahefooz4u, ravinder0003, Thanks to @Dees_Troy and TWRP Team
Source Code: https://github.com/mahefooz/android_device_xiaomi_tissot
Version Information
Status: Beta
Current Beta Version: 1.0
Beta Release Date: 2017-10-15
Created 2017-10-13
Last Updated 2017-10-16
good work bro waiting for development to start
Great work!
Celebrations
The first step towards the good community has been taken
Great were all waiting for devs to take a look at this devices ! Will it be official when you've fixed the boot issue ? thanks
great work!! thanks guys :good: Will I be able to flash Aroma Uninstaller to debloat?
deepakmohank said:
great work!! thanks guys :good: Will I be able to flash Aroma Uninstaller to debloat?
Click to expand...
Click to collapse
Yes, Aroma installer is working
thank-you. Have you tried the way Pixel devices boot twrp, send twrp zip to internal, then flash?
---------- Post added at 11:28 AM ---------- Previous post was at 11:01 AM ----------
Sorry for asking too many questions, one more to add, which s the partition that mounts when we mount System from twrp? Is it a or b?
Coolio
lakyman said:
Great were all waiting for devs to take a look at this devices ! Will it be official when you've fixed the boot issue ? thanks
Click to expand...
Click to collapse
Don't expect too much from now.
Wait for sometime as this is ported
Great work waiting for stable version... ?
great, thank you very much!!!
deepakmohank said:
Sorry for asking too many questions, one more to add, which s the partition that mounts when we mount System from twrp? Is it a or b?
Click to expand...
Click to collapse
yea good question, I'd like to know about it too..
marhensa said:
great, thank you very much!!!
yea good question, I'd like to know about it too..
Click to expand...
Click to collapse
I could see in Pixel forums about flashing twrp. It has options to back up a, b partitions or even both. Atm no access to computer, will need to check whether urs allow us the same.
Pixel twrp a/b link:
https://forum.xda-developers.com/pixel-xl/development/twrp-alpha1-pixel-devices-t3500312
Surprise!!!
Booted TWRP? But isn't temporary? Sad ?.
But don't worry, I have created a zip, ahh actually ported a zip ?, to flash TWRP permanently ?.
But please do note that I haven't tested this personally yet, as I'm in a bus, traveling right now.
But if guys have guts, then go ahead, & try this, & please report back .
Instructions:
Boot TWRP & just flash this zip from TWRP. That's all...
Link:
https://www.androidfilehost.com/?fid=962021903579484616
Update Test 2: https://www.androidfilehost.com/?fid=962021903579484804
If it works, please don't forget to hit thanks...
deepakmohank said:
I could see in Pixel forums about flashing twrp. It has options to back up a, b partitions or even both. Atm no access to computer, will need to check whether urs allow us the same.
Pixel twrp a/b link:
https://forum.xda-developers.com/pixel-xl/development/twrp-alpha1-pixel-devices-t3500312
Click to expand...
Click to collapse
No support for a/b system. Only active system can be reached
Thanks for great effort by devs
thanks for sharing~
hope it works~
Hi!
I just want to post my experiences so far.
TWRP booted up fine, also backup and MTP works.
I tried flashing magisk v14.2, which's installer told me the B slot is currenly active etc. Flashed without any problem. But rebooting the device I got bootloop.
Restoring the boot image from the backup made the device back to booting state.
ghpranav said:
Booted TWRP? But isn't temporary? Sad ?.
But don't worry, I have created a zip, ahh actually ported a zip ?, to flash TWRP permanently ?.
But please do note that I haven't tested this personally yet, as I'm in a bus, traveling right now.
But if guys have guts, then go ahead, & try this, & please report back .
Instructions:
Boot TWRP & just flash this zip from TWRP. That's all...
If it works, please don't forget to hit thanks...
Click to expand...
Click to collapse
unfortunately it does not work
h**p://kephost-image.tk/files/64k6re0jfsp4zmienhkr.png
TaRsY said:
Hi!
I just want to post my experiences so far.
TWRP booted up fine, also backup and MTP works.
I tried flashing magisk v14.2, which's installer told me the B slot is currenly active etc. Flashed without any problem. But rebooting the device I got bootloop.
Restoring the boot image from the backup made the device back to booting state.
Click to expand...
Click to collapse
Somehow Magisk is not yet working in Mi A1. Either flashed through recovery or other method, getting bootloop and other issues.
TaRsY said:
Hi!
I just want to post my experiences so far.
TWRP booted up fine, also backup and MTP works.
I tried flashing magisk v14.2, which's installer told me the B slot is currenly active etc. Flashed without any problem. But rebooting the device I got bootloop.
Restoring the boot image from the backup made the device back to booting state.
Click to expand...
Click to collapse
If you know then Magisk is not supported officially for A/B partitons devices including Pixel
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed.
* YOU are choosing to make these modifications, and if you point the
* finger at us for messing up your device, we will laugh at you.
*
*/
This is an unofficial port of the TWRP recovery for the Zenfone 3.
Thanks to @shakalaca for providing the base!
What Works?
No major issues found
What's broken?
You tell me!
Asus stock rom and TWRP
If you want to use asus stock rom and TWRP together you may have to flash Magisk after installing TWRP. Not doing so may result in a bootloop: Users have reported that stock rom without Magisk doesn't boot when TWRP is installed.
This doesn't apply to custom roms.
Download
https://drive.google.com/drive/folders/1KYX8G6wgOa_X7uJfIar7ENuk2Q1nQyWB
Sources
You can find the device tree and kernel on my github profile:
Device tree: https://github.com/Planet-X/android_device_asus_zenfone3/tree/twrp-8.1
Kernel: https://github.com/Planet-X/android_kernel_asus_msm8953/tree/lineage-15.1
XDA:DevDB Information
Team Win Recovery Project for ZE520KL/ZE552KL, Tool/Utility for the Asus ZenFone 3
Contributors
planet9, shakalaca
Version Information
Status: Alpha
Created 2018-01-30
Last Updated 2018-08-06
Changelog
2018-08-06:
Removed /firmware from the backup list due to errors.
2018-08-04:
Update to TWRP 3.2.3.
Added my signing key for upcoming LineageOS and Advanced Kernel builds.
Added ZE552KL variant "Z012DC".
Switched to SdFat for exFAT support.
All stock rom variants can now be flashed via TWRP. (It's still not recommended.)
Kernel updated to Linux 3.18.117, CAF-Tag LA.UM.6.6.r1-09400-89xx.0
Thanks to @makorn645:
Added ZE520KL variant "Z017D"
2018-05-16:
USB now reports the proper device model.
More F2FS kernel features.
Updated fstab with more partitions.
Updated device tree for oreo-mr1, built with 8.1 omni sources.
Latest LineageOS kernel: Linux 3.18.108, CAF-Tag LA.UM.6.6.r1-08500-89xx.0.
Thanks to @makorn645:
Logic to detect the device model.
Fixed serial number detection.
Unified tree.
Misc updates.
2018-03-09:
Added pstore support for advanced debugging.
Updated kernel to Linux 3.18.98.
2018-02-06:
Added f2fs support to the kernel.
Updated kernel to Linux 3.18.93.
Silenced "E: recv error on uevent" error.
2018-02-03:
Added proper exfat support to the kernel.
2018-02-02:
Fixed ext4 formatting of the cache partition.
2018-01-30:
Initial release.
Can I flash the oreo ROM for ze520kl using your TWRP version?
wolfquatz said:
Can I flash the oreo ROM for ze520kl using your TWRP version?
Click to expand...
Click to collapse
No you can't.
You need to use stock recovery.
nyanntaryou said:
No you can't.
You need to use stock recovery.
Click to expand...
Click to collapse
Where can I ger stock for my version 1712.85 plz?
@planet9 for 552KL is it the same version as released before or you have added something new?
Tks
Tested on my ze520kl / stock 8.0.0 and worked fine.
I'm now rooted ( magisk 15.4 ) installed.
Thanks bro.
wolfquatz said:
Can I flash the oreo ROM for ze520kl using your TWRP version?
Click to expand...
Click to collapse
It's work dude.
wolfquatz said:
Where can I ger stock for my version 1712.85 plz?
Click to expand...
Click to collapse
Flash raw image 1712.85 and you will getback to full stock without wiping data.
Eng.Raman said:
Flash raw image 1712.85 and you will getback to full stock without wiping data.
Click to expand...
Click to collapse
Raw image is the avaliable download on asus site than I flash via adb? Correct?
wolfquatz said:
Raw image is the avaliable download on asus site than I flash via adb? Correct?
Click to expand...
Click to collapse
No, the available download on asus site is the firmware zip.
The RAW image of the version you need WW_ZE520KL_14.2020.1712.85 is HERE.
1. Download and extract it.
2. Reboot your phone in fastboot mode.
3. Open command window inside the extracted folder and apply this command:
flashall_AFT WW_ZE520KL_14.2020.1712.85_M3.10.47.15_Phone-user.raw
Wait for flashing to complete then will reboot your phone and Done!
Now you are on full stock 14.2020.1712.85.
stark_br said:
@planet9 for 552KL is it the same version as released before or you have added something new?
Tks
Click to expand...
Click to collapse
There were only minor changes so you can stick to your currently installed version.
Eng.Raman said:
No, the available download on asus site is the firmware zip.
The RAW image of the version you need WW_ZE520KL_14.2020.1712.85 is HERE.
1. Download and extract it.
2. Reboot your phone in fastboot mode.
3. Open command window inside the extracted folder and apply this command:
flashall_AFT WW_ZE520KL_14.2020.1712.85_M3.10.47.15_Phone-user.raw
Wait for flashing to complete then will reboot your phone and Done!
Now you are on full stock 14.2020.1712.85.
Click to expand...
Click to collapse
Oh tks so much I will try this!
Will not wipe my app and data correct?
---------- Post added at 14:47 ---------- Previous post was at 14:17 ----------
wolfquatz said:
Oh tks so much I will try this!
Will not wipe my app and data correct?
Click to expand...
Click to collapse
Dann error again on intalling oreo...
E: falied to verify whole-file signature
tahn
E: signature verification failed
wolfquatz said:
Oh tks so much I will try this!
Will not wipe my app and data correct?
---------- Post added at 14:47 ---------- Previous post was at 14:17 ----------
Dann error again on intalling oreo...
E: falied to verify whole-file signature
tahn
E: signature verification failed
Click to expand...
Click to collapse
Same thing here! I can't install update UL-ASUS_Z012D-WW-14.2020.1712.85-user or UL-ASUS_Z012D-WW-15.0410.1712.31-user because of this error. I have downloaded again this files, but the error persist
darknesstoh said:
Same thing here! I can't install update UL-ASUS_Z012D-WW-14.2020.1712.85-user or UL-ASUS_Z012D-WW-15.0410.1712.31-user because of this error. I have downloaded again this files, but the error persist
Click to expand...
Click to collapse
[url]http://www.beritahuaja.com/2017/10/download-firmware-asus-zenfone-3-ze520kl.html[/URL] asus ze520kl oreo RAW firmware... flash using asus flashtool .. i hope this may help you
zulfikarbugis said:
http://www.beritahuaja.com/2017/10/download-firmware-asus-zenfone-3-ze520kl.html asus ze520kl oreo RAW firmware... flash using asus flashtool .. i hope this may help you
Click to expand...
Click to collapse
Will it lose the data after flashing?
[email protected]@ said:
Will it lose the data after flashing?
Click to expand...
Click to collapse
You have two choices on asus flashtool, u can format your data or not
zulfikarbugis said:
http://www.beritahuaja.com/2017/10/download-firmware-asus-zenfone-3-ze520kl.html asus ze520kl oreo RAW firmware... flash using asus flashtool .. i hope this may help you
Click to expand...
Click to collapse
I forget to say , my device is ze552kl.
Eng.Raman said:
Tested on my ze520kl / stock 8.0.0 and worked flawlessly.
I'm now rooted ( magisk 15.3 ) installed.
Thanks bro.
Click to expand...
Click to collapse
Can you tell me how you do it? Please explain to me,,, thanks before bro
zulfikarbugis said:
Can you tell me how you do it? Please explain to me,,, thanks before bro
Click to expand...
Click to collapse
1. FLash the RAW file that you find it HERE ( flash instructions in my post #11 ). After flashing complete you will getback to full stock 14.2020.1712.85.
2. Check for update and you will notify for oreo update ( when you unofficially unlocked the BL ) OR Download the latest Delta OTA for Oreo 15.0410.1712.31 from this LINK ( when you officially unlocked the BL ) and copy it to your external SD card then reboot to stock recovery and apply update from sdcard, when completed you will be on stock oreo 15.0410.1712.31.
3. Flash twrp-3.2.1-Z017-2018xxxx.
4. Reboot now to twrp recovery and flash magisk 15.x.
5. Done.
Hey Guys, i want to share the manual update to Oreo Beta and Treble rom installation with you.
Perform everything to the letter.
EMUI 8 USERS
-Download @HassanMirza01 TWRP Image. www.hassanmirza01.blogspot.it/p/elite-twrp.html
-Download update.zip.
-Download update_data_full_public.zip (rename to ''update_data_public'').
-Download update_full_PRA-L11_hw_eu.zip (rename to ''update_all_hw'').
-Download HuRUpdater from forum.xda-developers.com/honor-9/development/tool-flash-official-firmware-recovery-t3769279.
Put them (all 4 zip files) on a new folder called Oreo in external_sd.
1 : Flash Twrp from bootloader.
2 : Boot into twrp, click install, select HuRUpdater.zip.
3 : Reboot.
4 : Done.
Want install Treble rom on it?
1 : Download a Trebre GSI desired and put it on sdcard.
2 : Install twrp oreo version: www.drive.google.com/open?id=1rlQPRP234PoXY_yqup3oK_joOZGSIker, to flash use ''fastboot flash recovery_ramdisk Oreotwrp.img''.
3 : In twrp oreo, click on install, install image and select the GSI image and install to a ''system image'' partition.
4 : Wipe and Format Data to f2fs, wipe cache/dalvik/internal storage and reboot.
5 : Reboot and pray.
For troubleshooting look here.
https://www.xda-developers.com/flash-generic-system-image-project-treble-device/
CREDITS :
@HassanMirza01 for TWRP stuff.
@Atarii
@zxz0O0 For his new flashing tool.
IUME TEAM (@Askuccio_DROID, @Axan @Spectrothedragon @Trail Road @LastStandingDroid @Wire1122 @Razor10707 @dil3mm4.dev ) That provide me nocheck recovery.
Did you find any bugs on the AOSP ROM?, I'm thinking of flashing this now
Also, Did you tried the treble RR 6.0.0 ROM?
joaoj1999 said:
Did you find any bugs on the AOSP ROM?, I'm thinking of flashing this now
Also, Did you tried the treble RR 6.0.0 ROM?
Click to expand...
Click to collapse
No bugs for now , all working fine.
I have not tried it yet.
I don't understand ..
I followed all the steps, but it installed stock EMUI 5 with Android 7..
Now, at boot, it says "Failed verification", and it won't let me install twrp, even if bootloader looks unlocked
raiden99 said:
I don't understand ..
I followed all the steps, but it installed stock EMUI 5 with Android 7..
Now, at boot, it says "Failed verification", and it won't let me install twrp, even if bootloader looks unlocked
Click to expand...
Click to collapse
I pass to ALOO without lost frp, bl or imei. I will post screenshots here once done oreo step :fingers-crossed:
Current situation ..
raiden99 said:
I don't understand ..
I followed all the steps, but it installed stock EMUI 5 with Android 7..
Now, at boot, it says "Failed verification", and it won't let me install twrp, even if bootloader looks unlocked
Click to expand...
Click to collapse
You installed it from PRA-AL00XC01B220? Are you sure that you picked the correct update.zip of b320? I don't think...
Fr0nK said:
You installed it from PRA-AL00XC01B220? Are you sure that you picked the correct update.zip of b320? I don't think...
Click to expand...
Click to collapse
Probably I didn't install it correctly. What should I do now?
raiden99 said:
Probably I didn't install it correctly. What should I do now?
Click to expand...
Click to collapse
Idk what you want to do.
I want to install EMUI 8, but I'm not able to flash twrp because it fails.. even if the bootloader results unlocked.
raiden99 said:
I want to install EMUI 8, but I'm not able to flash twrp because it fails.. even if the bootloader results unlocked.
Click to expand...
Click to collapse
Are you in nougat or in oreo? If you are in nougat you have to digit fastboot flash recovery NAMEOFRECOVERYYYYYY.img and not fastboot flash recovery_ramdisk NAMEOFRECOVERYYYY.img
raiden99 said:
View attachment 4466545
current situation ..
Click to expand...
Click to collapse
why you want to install a chinese version if i tell that you have to rebrand to a honor 8 lite al00?
Delete
DarkJoker360 said:
Delete
Click to expand...
Click to collapse
for me isn't work, follow the steps to the letter. I just done from c432 to al00. wasn't able to flash oreo also tried to echo command from both elite twrp and mine..I'm trying as latest time.
haky 86 said:
for me isn't work, follow the steps to the letter. I just done from c432 to al00. wasn't able to flash oreo also tried to echo command from both elite twrp and mine..I'm trying as latest time.
Click to expand...
Click to collapse
This is the reason why i don't give support to rebranding . I tried so many times before getting the final result. Hope you will achieve that.
- none here -
Fr0nK said:
Since nobody manages to install this and finds many problems in doing so; failing to support everyone. If nobody besides me can install emui8 and treble rom, i delete the guide
Click to expand...
Click to collapse
Pls don't delete this guide I really want to try it later. I'm just little bit worried about bricking my device.
Why you don't just describe how you rebranded your device? Maybe this will help
MIcHiJK said:
Pls don't delete this guide I really want to try it later. I'm just little bit worried about bricking my device.
Why you don't just describe how you rebranded your device? Maybe this will help
Click to expand...
Click to collapse
Too complex(but easy) , too many different situations, can't support this. Sorry.
Fr0nK said:
Too complex(but easy) , too many different situations, can't support this. Sorry.
Click to expand...
Click to collapse
Take your time, but I'm willing to read that too, no matter how "complex"
I successfully installed oreo on my device but now i have a problem. I can't install working gapps. I used amr64 8.0 opengapps but they crash when i try to put my google account so i can't use google play store or any other google service. I also tried GSM install but it's not working. how to fix?
Hi, I want to install Magisk but i got this error.
- Mounting /system, /vendor
! Cannot mount /vendor
- Unmounting partitions
Updater process ended with ERROR: 1
Error installing zip file '/sdcard/Magisk-v16.0.zip'
Click to expand...
Click to collapse
It's clean install with wiped system, cache, data before.
Phone: Redmi Note 4 (mido)
Recovery: Red Wolf Recovery Project V3.2.1-027
Harry0309 said:
Hi, I want to install Magisk but i got this error.
It's clean install with wiped system, cache, data before.
Phone: Redmi Note 4 (mido)
Recovery: Red Wolf Recovery Project V3.2.1-027
Click to expand...
Click to collapse
try with treble supported normal twrp recovery and clean install your rom
I can't give link because I haven't got 10 posts
https://forum.xda-developers.com/re...other-development/rom-lineageos-15-0-t3690465
Check out the downloads section of the xda link I gave you. I hope there will be a solution there
Hope you solve this problem.
HuseyinS said:
try with treble supported normal twrp recovery and clean install your rom
I can't give link because I haven't got 10 posts
https://forum.xda-developers.com/re...other-development/rom-lineageos-15-0-t3690465
Check out the downloads section of the xda link I gave you. I hope there will be a solution there
Hope you solve this problem.
Click to expand...
Click to collapse
Thanks! Helped change recovery.
This is weird because I was using this recovery earlier with magisk and everything was 100% fine.
Hi, I want to
Can someone will tell how to do it step by step procedures I am also facing sam
will tell how to do it step by step procedures I am also facing same issue device mido
@Sajag I flashed recovery with twrp with treble support.
Harry0309 said:
@Sajag I flashed recovery with twrp with treble support.
Click to expand...
Click to collapse
can you send me the link of twrp for treble builds??
Anil Jeenapati said:
can you send me the link of twrp for treble builds??
Click to expand...
Click to collapse
https://forum.xda-developers.com/on...overy-twrp-3-2-1-0-oreo-oxygenos-5-0-t3725723
EDIT: Sorry, didn't realize you were on mido, and not cheeseburger. Ignore the above.
Anil Jeenapati said:
can you send me the link of twrp for treble builds??
Click to expand...
Click to collapse
For mido: https://drive.google.com/open?id=1zdgzjXssY3CFhdxmLeSR0AlqZQQyZ-7F
I flasheded to the latest version of RR-O-v6.0.0-20180502-mido-Official using clean flash. After flashing I realised that I was not able to flash any zip. "Cannot mount/vendor" error was being shown.now I am not able to root (magisk). Could you please help me in this??????????????
Anil Jeenapati said:
I flasheded to the latest version of RR-O-v6.0.0-20180502-mido-Official using clean flash. After flashing I realised that I was not able to flash any zip. "Cannot mount/vendor" error was being shown.now I am not able to root (magisk). Could you please help me in this??????????????
Click to expand...
Click to collapse
Try a different rom/ or different twrp
Try other ROMs
Anil Jeenapati said:
I flasheded to the latest version of RR-O-v6.0.0-20180502-mido-Official using clean flash. After flashing I realised that I was not able to flash any zip. "Cannot mount/vendor" error was being shown.now I am not able to root (magisk). Could you please help me in this??????????????
Click to expand...
Click to collapse
Hey. I was also facing the same issue . My opinion switch to another ROM i switched to Pixel experience.
Sajag said:
Hey. I was also facing the same issue . My opinion switch to another ROM i switched to Pixel experience.
Click to expand...
Click to collapse
are you getting OTA Updates now..??
I flashed Candy Os but same problem while updating
Anil Jeenapati said:
are you getting OTA Updates now..??
I flashed Candy Os but same problem while updating
Click to expand...
Click to collapse
I am not sure . I flashed the latest version till now there are no new update . I think candy Os is a treble ROM try non treble rom
Using the treble supported TWRP fixed the vendor mount problem but I get into a bootloop when I try to install Magisk (latest version). I'm using the Havoc ROM (Android 8.1.0 - Treble Supported).
Edit: Got Magisk running by using a modified version for Treble.
Direct Link to the custom build of Magisk: Here
Source of the Link: LineageOS 15.1 by abhishek987
Flash this recovery, its for treble:
https://forum.xda-developers.com/re...covery-twrp-exclusive-3-2-1-5-treble-t3775081.
And flash Magisk 16.4 beta or higher
Same problem...
madbat99 said:
Try a different rom/ or different twrp
Click to expand...
Click to collapse
I also suffering that issue
Solution?
Anil Jeenapati said:
I flasheded to the latest version of RR-O-v6.0.0-20180502-mido-Official using clean flash. After flashing I realised that I was not able to flash any zip. "Cannot mount/vendor" error was being shown.now I am not able to root (magisk). Could you please help me in this??????????????
Click to expand...
Click to collapse
Hello I also installed the same ROM plus the Recovery of Red Wolf, remember that since its a treble you cannot mount vendor, but actually its easier than anything, why? cause the RR its based on Lineage OS and this last one is based on Cyanogen Mod, at the end what im trying to say its that the root services are already included in the ROM you only need to "unlock it" so i have the link for that, you only need to install this addon in .zip format (all the links and products are not mine, so please give thanks to the amazing developers). This is the official link and it also comes with an instructive step by step, I did the install trough sideload and now is working!
Example of command with adb sideload: C:\Users\kaks\Downloads\adb\adb sideload "C:\Users\kaks\Downloads\adb\addonsu-15.1-arm64-signed.zip"
www . cyanogenmods.org / root-lineageos-15-1-android-oreo-rom /
Hope this work for you as it did for me
Kakashi171 said:
..the root services are already included in the ROM you only need to "unlock it" so i have the link for that, you only need to install this addon in .zip format (all the links and products are not mine, so please give thanks to the amazing developers). This is the official link and it also comes with an instructive step by step, I did the install trough sideload and now is working!
Click to expand...
Click to collapse
OK, but can I then hide the "rooting" afterwards with Magisk?
HuseyinS said:
try with treble supported normal twrp recovery and clean install your rom
I can't give link because I haven't got 10 posts
https://forum.xda-developers.com/re...other-development/rom-lineageos-15-0-t3690465
Check out the downloads section of the xda link I gave you. I hope there will be a solution there
Hope you solve this problem.
Click to expand...
Click to collapse
THANK YOU SO MUCH THAT HELPED!!
I JUST CHANGED RECOVERY NOTHING ELSE!