Database Develop

[ROM] Epic ROM MIUI 9 By Epic Team (MrRaines) for Mi 6

IMPORTANT ADVISE! I AM NOT THE MAINTAINEER OF THE EPIC ROM OF MI6 YET, NOW IS JOSEMA93, I AM RETIRED BY NOW (BUT WE'LL SEE YOU AGAIN IN AOSP SOON)​
Jamflux, Pocarropa, and MrRaines (MrTomatico on en.miui), creators of Épic ROM, we are glad to present Épic ROM for Xiaomi Mi MIX, who was born thanks to the hard work of these guys. Epic ROM is a Custom ROM based on MIUI, but with some mods and improvements that you can see below on features chapter.
The focus of this ROM is improve MIUI official stock on many devices making many mods and improve Xiaomi sellers to get a bigger MIUI-ers family!
**IMPORTANT ADVISE : Install at your own risk on your device. We are not responsible of any damage on your device. Read carefully instructions before install.
Requirements:
-Xiaomi Mi 6
-Unlocked Bootloader (official unlock to prevent issues)
-Custom Recovery (Cofface TWRP Recovery is highly recommended)
-Make previously a full Backup by TWRP Recovery (System, Data, Cache, and EFS).
-Read all thread before proceed
-Love for technology and most important: Love for Xiaomi!
Newest Features
Changelog:
* 9.0.5.0 v1.5 base with all changes (visit en.miui.com/forum to check all)
* Assisted GPS in Settings
* New Camera Interface
* Camera2Api and HAL3 Enabled by default
* New Miui Mail enabled
* Face Unlock
* Blur lock screen effect
* New Epic Themes
* New TWRP 3.2.0.0 base with Epic Theme by MrRaines
* All features from Epic ROM 7.11.30
* Improved Themes Manager and Welcome Message
* New PowerMenu Design
* Notification shade improved (not aosp by now but is better than older)
* Soon I'll add smart assistant and more...
The rest of features are in quote below:
HTML:
* Fixed Notifications and FACE UNLOCK
* BugFixes in the system adn gallery
* Fixed widgets issues
* New boot mechanism
* New settings for Smart Assistant (next week I will add many other features like enable and disable it, etc)
* Fixed many bugs with languages from GitHub like Italian or German
* Fixed a little issue when displaying WiFi in some networks
* Fixed notifications mechanism
* Introduced SMART ASSISTANT Global
* Added few new languages
* Many bug fixes in system
* UI Simplified
* New Epic Music Widgets
* DELETED antispam by default by people asking (now you can flash it by addons in OTA)
* New Audio Modes for Mi 6 and MiMIX
* New GRID for Launcher and Folders (Thanks to Tomhenson and MrRaines)
* New GRID selector in Settings/home and recents (Thanks to Tomhenson and MrRaines)
* New Ringtones and Notifications sounds
* New mods for Icons, Grid, Reflected Icons, and more in OTA and ADDONS
* All changelog from official build in en.miui.com
* Safety net and android pay only works without ROOT (Payments will work as HCE protocol)
* New Network manager and bugfixes in system
-SuperSU in ota and mods, if you want it.
-Improved System Speed
-MultiWindow
-Fixed Wifi from 3.0
-Updated all languages from GitHub
-Deleted Adaway (anti spam now is native in MIUI system by MrRaines)
-Deleted root
-DocumentsUI enabled ALWAYS by default
-Fixed SafetyNet and NFC Payments!
Xiaomi.eu base (thanks to this, I don't have to deodex all rom, that takes me about 1 hour in my old computer... Blur-lockscreen effect is added also in epic rom (services.jar) and all languages from eu base; THANKS to Ingbrzy for his amazing work!)
DOZE enabled!!
New apps added to OTA and MODs (in settings)
Improved icons on status bar mods and improved the rest of the mods
LockScreen Icon in Status Bar MOD now is White
Optimizations on TWRP installation and GAPPS
Better Intelligent CPU management and RAM
DPI Changer in Ota and MODs (settings app)
Multilanguage
Zipalign all ROM
New Nice Icons in settings and launcher
New (a lot of) mods in OTA & MODS on settings
Gapps Pico pre-installed (Google Play Store and Google Services... you can choose what Google app's are you going to install later :P)
Épic OTA Service Added on Settings
Epic Mods on OTA app
Music App Improved
Icons on Settings re-orderer (now you'll have Dolby and SuperSU, and dolby icon from launcher has been removed, you can hide supersu icon from supersu app and only have supersu icon in settings)
Init.d support
Busybox pre-installed
Kernel tweaks (very little changes on boot.img)
Build.prop improved (again)
Miui System improved to get better RAM management
Services and frameworks improvements (more battery and system performance)
MIUI Launcher improvements
Camera MODs (better image quality)
Adway integrated on system (you can see also on Settings)
All Chinese app's and Google app's (bloatware) removed
Advanced Reboot Menú (PowerMenu improved)
DolbyAtmos Updated to latest version
Some Nice Wallpapers added
More Languajes and Spanish Updated (thanks to [user=5863451]@JamFlux[/user])
Assistant Touch Updated Like Epic Team Style :P
Animations on SystemUI (lockscreen), thanks to xiaomi.eu but we now add some optimizations to this
Epic Bootanimation improved
Optimized installation time from TWRP.
Fixed issues in NFC pay (you should unroot your device from SuperSU app)
Added XIAOMI installer multilang (with antivirus :P )
Better Battery and Performance/RAM management thanks also to many patches that we built for JBart
Languages Supported:
All European Languages from Xiaomi.eu (Thanks Ingbrzy, for bring to all MIUI users xiaomi eu roms (availables in www.xiaomi.eu) )
How to install first time
* First of all, make a complete backup of all your photos and internal data in the computer, since the first installation requires to eliminate ALL the sdcard content, given the encryption of Android Nougat and later; the one that warns you is not a traitor, you are going to lose all the data (just as it happens if you install other ROMS). This is due to (in turn) that if we have not formatted the sdcard, it will not boot for security protection data of the cited encryption,
* With TWRP Recovery (read tutorials on how to install it) we will make another backup, but this time System, Data, Cache, Boot, and especially the EFS (important).
* Download the ZIP flasheable and pass it to the internal memory of the phone (no matter if we have already formatted it or not).
* Restart on TWRP recovery
* Make Wipes: System, Data, Dalvik, Cache.
* Install from Recovery the EpicROM ZIP flasheable and wait for it to appear okay (If you get error 7 the TWRP in the step of "formating system / extracting system", restart in recovery immediately, and reinstall it, this is due that in Nougat you must re-generate the system partition for encryption topics, so it will install you, it should work like the rest of us )
* We reboot in fastboot mode once the rom has been installed correctly. To do this, we can do it from TWRP in REBOOT / Fastboot or by holding down the power button and the volume down button until FASTBOOT and Mitu appear by soldering an Android robot. In this step, we connect the mobile to the computer, and in the same folder that can be downloaded from en.miui.com/unlock (to unblock the bootloader) click inside that folder in a blank space in the right mouse click while holding the SHIFT key on the keyboard; a window will appear and the "open command window" option should appear. We tapped on that window. When it opens, if you open powershell (blue screen) from windows 10, type cmd and press enter. If you open the classic cmd of all life (BLACK SCREEN) we are already where we want.
* Type in the cmd (be powershell or cmd) fastboot format userdata and press enter. There will be formatted all our mobile, and restarting it will work everything.
* Restart normally and configure. Remember that the first start takes a little longer, from there, it will always light fast. In the following versions, it will NOT BE MISSING to do all this, just install without wipes and to run. I already adapt it so that I clean what I have to clean with each update EXCEPT that I expressly say something else in that UPDATE.
* Enjoy (and re-pass all data previously backed up to the internal memory).
How to install UPDATE from Epic ROM 7.X.XX
Download Epic OTA with OTA app from Settings (No MIUI Updater, use EPIC OTA!)
You can also download update manually from en.miui forum or htcmania spanish forum
Install update from Epic OTA or from TWRP Recovery manually
You don't need to wipe anything if we don't say it on update! If you have to do some special, we will let you know
Reboot
Enjoy
Download Center
9.0.5.0_1.5 for Xiaomi MI 6 (Sagit) Nougat 7.1.1
Download: https://www.androidfilehost.com/?fid=745849072291693954
Note: Please remember: Installation could take about 5 minutes in the TWRP Recovery, BE PATIENT and don't touch anything!
Current Status: Tested 100%; ROM Stable and TWRP by Cofface works in all MIUI roms!!
Note: If you want to use Google Assistant please set as default assistant Google Aplication in settings/installed aplications/default/assistant and enable Google in home button in settings/aditional settings/buttons.
Obviously, you need to install Google App .
If you like my work please consider to make me a little donation in this paypal link
Thanks to:
Xiaomi (and Xiaomi official developers for bring to us this amazing SO)
Google
Xiaomi Eu Team
MultiROM Team
Epic Team founder Members @JamFlux, @pocaropa, @MrRaines (MrTomatico on en.miui))
All MIUI DEVICE TEAM
All Admins/Mods/SMods from En.MIUI for all support
HTCManía (Spanish Forum)
Official Website: www.epicrom.pro
Enjoy and Remember: Keep loving Xiaomi!

Nice work, I'll definitely look into this once my mi 6 arrives

get for natrium, please

Flashed and seems to work very good.
Thank you!

Can you add features like blurred statusbar option? Like the one on miui7. Since last build miuipro 7.5.25 has implemented this. Thanks for the rom anyway

Got error 7 many times. I cant fix It.
Downloaded 3 times and same

Not booting at all. 30 min and still bootanimation. I have followed the instructions to the letter and nothing changes. Tried it thrice.
A video tutorial would be nice, I might be doing something wrong. Also I'm on official TWRP, IDK if that makes a difference.

riirezende said:
Got error 7 many times. I cant fix It.
Downloaded 3 times and same
Click to expand...
Click to collapse
When you get error 7 try to restart to recovery and flash again. This worked for me with cofface twrp.
---------- Post added at 12:36 AM ---------- Previous post was at 12:36 AM ----------
Asce1062 said:
Not booting at all. 30 min and still bootanimation. I have followed the instructions to the letter and nothing changes. Tried it thrice.
A video tutorial would be nice, I might be doing something wrong. Also I'm on official TWRP, IDK if that makes a difference.
Click to expand...
Click to collapse
No problem with cofface twrp

battery is really awful magisk not working always having FC

IronJacob said:
When you get error 7 try to restart to recovery and flash again. This worked for me with cofface twrp.
---------- Post added at 12:36 AM ---------- Previous post was at 12:36 AM ----------
No problem with cofface twrp
Click to expand...
Click to collapse
Im using cofface also.
Ill try again thx

Someone tried with Official TWRP? I want Install Official TWRP then This

In 2 days I'll release new update by OTA with bug fixes and new amazing features.

Uploading 7.6.10 with many fixes (even battery drain fix).

MrRaines said:
Uploading 7.6.10 with many fixes (even battery drain fix).
Click to expand...
Click to collapse
is it still uploading? Didn't see the links for old file and 7.6.10 either :/

IronJacob said:
No problem with cofface twrp
Click to expand...
Click to collapse
Actually the recovery does not matter. I used official TWRP recovery and got it to work.
It's juts the flashing guide that misguided (lol) me.
Coming from global/official/beta or any other ROMS you HAVE TO WIPE USER DATA.
Also going back to global/official/beta ROMS you HAVE TO WIPE USER DATA.
Otherwise the guide is okay, if this could be pinned or added together with the other *NOTES it would be superb.

Asce1062 said:
Actually the recovery does not matter. I used official TWRP recovery and got it to work.
It's juts the flashing guide that misguided (lol) me.
Coming from global/official/beta or any other ROMS you HAVE TO WIPE USER DATA.
Also going back to global/official/beta ROMS you HAVE TO WIPE USER DATA.
If otherwise the guide is okay, if this could be pinned or added together with the other *NOTES it would be superb.
Click to expand...
Click to collapse
Then everythink is lost from phone ? I need to download with mtp this rom to internal to flash it, or otg works?

fuxmen said:
Then everythink is lost from phone ? I need to download with mtp this rom to internal to flash it, or otg works?
Click to expand...
Click to collapse
Yes, everything is lost from phone.
Copy internal storage, or important data (in internal) to computer.
I have not tested otg since I don't have a type-c otg nor do I have a converter to type-c.
Sideloading works. (I use this a lot)
Also you could just enable mtp and copy .zip to storage.

Not booting stays at EpicROM logo :/
Trying With officeial TWRP, With Cofface, formated all partitions :/ No error 7 while falshing all process went well.
Hmmm What am I doing wronge here :/
edit
FORMAT DATA in TWRP helped

Why the landscape lock icon persist?

yoghibawono said:
Why the landscape lock icon persist?
Click to expand...
Click to collapse
Because you've installed the full mod of status bar from ota and mods by MrRaines . Install the "come back to normal/stock status bar mod" to revert it hahaha.

Unofficial LineageOS 14.1 for ZE552KL and ZE520KL

Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
This is a continuation of the work by Shakalaca. Currently not much will be different. It does have however the latest security Patches. I will be splitting my time between CM 14.1 and Lineage 15. If you have questions please ask. The Z017 should work with both versions, I am running the Z012(KE552KL) and it seems okay.
Prerequisites:
TWRP
Unlock Bootloader
What Works?
- No Major Issues
What's broken ?
You tell me
Download Links
ROM:
https://drive.google.com/drive/folders/0B9R9sRY5L3uiM055Z3ZYeF9MXzA?usp=sharing
TWRP:
https://drive.google.com/drive/folders/0B9R9sRY5L3uidzNmTmpzSWthMTQ
GAPPS:
http://opengapps.org/
Special Thanks @anhenrique @shakalaca
Source Code:
https://github.com/LineageOS-Zenfone3
XDA:DevDB Information
LineageOS 14.1 for ZE552KL and ZE520KL, ROM for the Asus ZenFone 3
Contributors
basenode, basenode
ROM OS Version: 7.x Nougat
Based On: LineageOS
Version Information
Status: Beta
Created 2017-08-31
Last Updated 2017-08-30

Changelog:
Aug 30 2017:
- Build Using Latest CM14.1 Sources (Android 7.1.2)
- Includes August Security Updates

I'll try it out sir. Considering I sat across from you for two days while you were dinkin around with it

Nice man Hope you can fix 60fps record bug

Is it 7.1.2?

sontranngoc said:
Is it 7.1.2?
Click to expand...
Click to collapse
Yes it is.

[email protected]
basenode said:
Yes it is.
Click to expand...
Click to collapse
Thank you. I'm installing. But why I cannot install a zip file from internal memory, it has no choice (I can do that with Xperia Z). I have to install by adb sideload instead.

sontranngoc said:
[email protected]
Thank you. I'm installing. But why I cannot install a zip file from internal memory, it has no choice (I can do that with Xperia Z). I have to install by adb sideload instead.
Click to expand...
Click to collapse
What Recovery are you using? I have TWRP and when I select install and navigate to /sdcard/ I am able to flash from internal

Can you insert ViperOS / ResurrectionRemix functions? How to lock the power menu and block fast access, both with the screen locked? This helps a lot when the cell phone is lost or stolen.

kiq1702 said:
Can you insert ViperOS / ResurrectionRemix functions? How to lock the power menu and block fast access, both with the screen locked? This helps a lot when the cell phone is lost or stolen.
Click to expand...
Click to collapse
I would like to keep this rom as stick as possible. I am open to Updating the existing ViperOS Rom for this device. I am one person so it might be difficult for me to support too many roms especially considering my personal desire to see oreo on this device. I will take a look @ Viper and see what I can do.

basenode said:
What Recovery are you using? I have TWRP and when I select install and navigate to /sdcard/ I am able to flash from internal
Click to expand...
Click to collapse
I cannot boot to TWRP:
fastboot flash recovery twrp-3.1.0-0-Z012-20170408-N.img
target reported max download size of 536870912 bytes
sending 'recovery' (21080 KB)...
OKAY [ 0.697s]
writing 'recovery'...
OKAY [ 0.135s]
finished. total time: 0.838s
...
..
fastboot reboot
rebooting...
finished. total time: 0.016s
After this command, the phone start normally, not into TWRP
---------- Post added at 01:54 PM ---------- Previous post was at 01:42 PM ----------
basenode said:
What Recovery are you using? I have TWRP and when I select install and navigate to /sdcard/ I am able to flash from internal
Click to expand...
Click to collapse
I can boot into TWRP, but after wipe cache, system, dalvik, i install the zip file, it shows the error:
Can't install this package on top of incompatible data
Updater process ended with ERROR: 7
Error installing file 'zip ......'

sontranngoc said:
I cannot boot to TWRP:
fastboot flash recovery twrp-3.1.0-0-Z012-20170408-N.img
target reported max download size of 536870912 bytes
sending 'recovery' (21080 KB)...
OKAY [ 0.697s]
writing 'recovery'...
OKAY [ 0.135s]
finished. total time: 0.838s
...
..
fastboot reboot
rebooting...
finished. total time: 0.016s
After this command, the phone start normally, not into TWRP
---------- Post added at 01:54 PM ---------- Previous post was at 01:42 PM ----------
I can boot into TWRP, but after wipe cache, system, dalvik, i install the zip file, it shows the error:
Can't install this package on top of incompatible data
Updater process ended with ERROR: 7
Error installing file 'zip ......'
Click to expand...
Click to collapse
Hi!
This will solve your problem.:
1- Open the ROM with Winrar;
2- Go to: META-INF -> com -> google -> android;
3- Run the "updater-script" file with Notepad ++;
4- Delete the first 1 line, save and update the file in ROM;
Update your TWRP from main Zenfone 3 folder: https://mega.nz/#F!kl8lmKRL!ZbLvz1b4YgLMr_n09vRrTA (twrp-3.1.1-0-Z017-20170826.img)

ToDream said:
Hi!
This will solve your problem.:
1- Open the ROM with Winrar;
2- Go to: META-INF -> com -> google -> android;
3- Run the "updater-script" file with Notepad ++;
4- Delete the first 1 line, save and update the file in ROM;
Update your TWRP from main Zenfone 3 folder: https://mega.nz/#F!kl8lmKRL!ZbLvz1b4YgLMr_n09vRrTA (twrp-3.1.1-0-Z017-20170826.img)
Click to expand...
Click to collapse
Thanks. I have installed successfully.
We have to remove 2 BELOW RED LINE, NOT FIRST 1 LINE:
run_program("/tmp/install/bin/otasigcheck.sh") != "31744" || abort("Can't install this package on top of incompatible data. Please try another package or run a factory reset");
else
mount("ext4", "EMMC", "/dev/block/bootdevice/by-name/userdata", "/data", "");
package_extract_file("META-INF/org/lineageos/releasekey", "/tmp/releasekey");
run_program("/tmp/install/bin/otasigcheck.sh") != "31744" || abort("Can't install this package on top of incompatible data. Please try another package or run a factory reset");
The first line will check for products, I saw that line already included Z017 and Z012, it's not a problem.

sontranngoc said:
Thanks. I have installed successfully.
We have to remove 2 BELOW RED LINE, NOT FIRST 1 LINE:
run_program("/tmp/install/bin/otasigcheck.sh") != "31744" || abort("Can't install this package on top of incompatible data. Please try another package or run a factory reset");
else
mount("ext4", "EMMC", "/dev/block/bootdevice/by-name/userdata", "/data", "");
package_extract_file("META-INF/org/lineageos/releasekey", "/tmp/releasekey");
run_program("/tmp/install/bin/otasigcheck.sh") != "31744" || abort("Can't install this package on top of incompatible data. Please try another package or run a factory reset");
The first line will check for products, I saw that line already included Z017 and Z012, it's not a problem.
Click to expand...
Click to collapse
Actually it depends on the program that you will use to edit, using Notepad ++ you delete only this line of verification.
Follows attached

RobinRo said:
Nice man Hope you can fix 60fps record bug
Click to expand...
Click to collapse
@kyle_l88 and I are working on it but I can't make and promises

Battery Issues
Hi, I am having a lot of battery drain from LineageOS. "LineageOS System" is taking 27% and "Android OS" is taking up 24%. I have battery optimization on for everything possible, and I have battery saving kick in at 25%. My location services are on battery saving, and Bluetooth and WiFi are off. I probably have a screen on time for 1 to 2 hours, so I should end the day with a lot more than I have. Also, double tap to wake isn't working for me as well.

So far everything seems pretty great. Had a couple force close issues. The camera certainly doesn't support 60FPS recording on 1080p yet. But i am working on that part of the code. Otherwise there seems to be few, if any, issues. High five! :good:

jyao6429 said:
Hi, I am having a lot of battery drain from LineageOS. "LineageOS System" is taking 27% and "Android OS" is taking up 24%. I have battery optimization on for everything possible, and I have battery saving kick in at 25%. My location services are on battery saving, and Bluetooth and WiFi are off. I probably have a screen on time for 1 to 2 hours, so I should end the day with a lot more than I have. Also, double tap to wake isn't working for me as well.
Click to expand...
Click to collapse
I am running it on a test device and and looking at the battery life. I'll leave it on tonight also to see how it does. I don't think this version has doubletap to wake. I know there is double tap on statusbar for sleep.
I added an issue here for tracking: https://github.com/LineageOS-Zenfone3/android_device_asus_Z017/issues/2

jyao6429 said:
Hi, I am having a lot of battery drain from LineageOS. "LineageOS System" is taking 27% and "Android OS" is taking up 24%. I have battery optimization on for everything possible, and I have battery saving kick in at 25%. My location services are on battery saving, and Bluetooth and WiFi are off. I probably have a screen on time for 1 to 2 hours, so I should end the day with a lot more than I have. Also, double tap to wake isn't working for me as well.
Click to expand...
Click to collapse
Did you wipe everything before installing or dirty flash over the shakalaca ROM?

basenode said:
Did you wipe everything before installing or dirty flash over the shakalaca ROM?
Click to expand...
Click to collapse
No, I did not wipe it. This problem was also present in the most recent ROM from shakalaca if that helps.

[ROM][RAV*][SOFIA*][11][UNOFFICIAL] DISCONTINUED

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Havoc-OS 4.x is based on AOSP, inspired by Google Pixel.​Has a refined Material Design 2 UI crafted by @SKULSHADY.​Many useful features that will blow your mind.​All you can dream of and all you'll ever need.​Just flash and enjoy...​
Code:
[SIZE="3"][SIZE="3"][B][U]General:[/B][/U][/SIZE]
Material Design 2 UI
Android R Style Screenrecord Dialog
Rounded UI
Inbuilt GApps (optional)
Face Unlock
Enhanced QS Battery Estimation
Lockscreen Clocks
Font Customisation
Dark Theme Support for AOSP apps
Notification LED Settings
Pixel Lockscreen weather
Signature Spoofing
Micro-G support
Lockscreen charging animation
[SIZE="3"][B][U]Status Bar:[/B][/U][/SIZE]
Clock & Date Settings
Custom Logo
Brightness Control Gesture
Double Tap to Sleep
Network Traffic Indicator Settings
Carrier Label Settings
Battery Icon Style/Percentage Settings
Status Bar Icons Toggle
HD/VoLTE Icon Toggle
4G/LTE Icon Toggle
Data Disable Icon Toggle
Roaming Indicator Toggle
Small Mobile Type Icon Toggle
Bluetooth Battery Status Toggle
[SIZE="3"][B][U]Quick Settings:[/B][/U][/SIZE]
Quick Pulldown
Smart Pulldown
Battery Estimates Toggle
Background Opacity
Background Blur Configuration
Header Image Configuration
QS Customisations
Rows/Column
Tile Title
Vibrate on Touch
Brightness Slider Customization
Brightness Slider On Bottom/Top/Hidden
Auto Brightness Icon
Brightness Control Buttons
QS Footer Customization
Settings Icon
Running Services Icon
Edit Icon
User Switcher Icon
[SIZE="3"][B][U]Ambient Display:[/B][/U][/SIZE]
Show/Hide Battery Level
Ambient Options
Always On
Always On When Charging
Wakeup On New Notifications
Wakeup on New Music (Music Ticker)
Sensor Based Screen Wakeup (Tilt/Hand Wave/Pocket)
Double Tap for Ambient Display
Ambient/Always On Display Brightness Configuration
[SIZE="3"][B][U]Screen:[/B][/U][/SIZE]
Corners Customisation
Rounded Corner Radius
Corner Content Padding
Legacy App Scaling
Force Higher Aspect Ratio for Selected Apps
[SIZE="3"][B][U]Buttons:[/B][/U][/SIZE]
Navigation
Nav Bar Toggle
System Navigation Type
Arrows Keys
Volume Buttons
Swap Keys
Volume Steps
Long Press to Seek Tracks
Keyboard Cursor Control
Volume Rocker Wakeup
Volume keys Answer Call
Power Button
Power Menu Customization
Lockscreen Options
Visibility on the Lockscreen
Reboot
Advanced Reboot
Screenshot Option
Screenrecord
Screen-Off Torch
Double Tap Power Button
Long Press Power Button
Back Gesture
Arrow Animation toggle
Long Swipe Type (Swipe and Hold/Swipe Edge to Edge)
Long Swipe Timeout
Long Left/Right Swipe Action
Haptic Feedback toggle
[SIZE="3"][B][U]Gestures:[/B][/U][/SIZE]
Jump To Camera
System Navigation Settings
Prevent Ringing Gesture
Swipe To Screenshot
Touchscreen Gestures
[SIZE="3"][B][U]Lockscreen:[/B][/U][/SIZE]
Double Tap to Sleep
Media Cover Art
Media Cover Art Blur Level
Music Visualiser
Unlocking
Pocket Detection
Fingerprint
Screen Off FOD
Show Icon
Recognizing Animation
FP Authentication Vibration
FP error Vibration
Elements Customisation
Status Bar
Quick Settings
Lock Icon
Charging Info
[SIZE="3"][B][U]Notifications:[/B][/U][/SIZE]
Flashlight
Blink for incoming call
Blink for Call Waiting
Screen
Edge Lighting Customisation
Status Bar
Heads Up
System
FC Notifications
Misc
Kill App Button
Noisy Notifications
[SIZE="3"][B][U]Animations:[/B][/U][/SIZE]
Animation Duration
System Animation customization
QS Tile Animation Customisation
[SIZE="3"][B][U]Battery Saving:[/B][/U][/SIZE]
Smart Pixels
Suspend Actions
[SIZE="3"][B][U]Miscellaneous:[/B][/U][/SIZE]
Gaming Mode
Wake Up on Charge
Charging Animation
Screenshot Type (Full/Partial)
Adaptive Playback
Playback Timeout (30sec/1min/2min/5min/10min)
[SIZE="3"][B][U]Other Features:[/B][/U][/SIZE]
Vibration & Haptics Customization
LiveDisplay
Notch Hide Settings
Seperate ringtone for SIM1&2
Screen Refresh Rate (For Supported Devices)
ALways On Display
Smart Charging
Theming
Styles and Wallpapers
Dark Theme
Accent Colour
Icon Shape
[SIZE="3"][B][U]QS Tile Shortcuts:[/B][/U][/SIZE]
Heads Up tile
Caffeine tile
CPU info tile
Smart pixel tile
Live Caption
Screenrecord tile
Gaming Mode tile
Screenshot tile
LTE tile
Music Tile
LiveDisplay
Switch Data Card Tile
Reboot Tile
Reading Mode
Gaming Mode
Compass
Sound Search
Compass Tile
[/SIZE]
https://photos.app.goo.gl/WSbmYy7QeB6K9CSn6​
Founder & Lead Developer:​SKULSHADY (Anushek Prasal)​​Support Team:​theo.j22 (Tushar Jain)​​
If you like our work then please consider donating.​PayPal: https://www.paypal.me/ANUSHEK​UPI: [email protected]​Maintainer PayPal: https://www.paypal.me/ANUSHEK
Open GApps: http://opengapps.org
Magisk: https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
Telegram Support Group: https://t.me/havocofficial
Telegram Announcements Channel: https://t.me/Havoc_OS
Discord Server: https://discord.gg/YfhBCj4[/SIZE][/INDENT]
LineageOS (https://github.com/LineageOS)​Crdroid (https://github.com/crdroidandroid)​Pixel Experience (https://github.com/PixelExperience)​Nitrogen Project (https://github.com/nitrogen-project)​Omnirom (https://github.com/omnirom)​And all the other Developers, Testers, Donators and Users.​
https://github.com/Havoc-OS​https://github.com/Havoc-Devices​
Device Trees: https://git.asineth.gq/android_device_motorola_sofiar/
Vendor Trees: https://git.asineth.gq/android_vendor_motorola_sofiar/
Kernel Trees: https://git.asineth.gq/android_kernel_motorola_trinket/
KNOWN BUGS:
Let me know!

To Install:
1. Extract the zip and open a shell with ADB and fastboot.
2. Reboot your device into fastbootd mode.
Code:
fastboot reboot fastboot
3. Flash boot, system, product, and vbmeta.
Code:
fastboot flash boot boot.img
fastboot flash system system.img
fastboot flash product product.img
fastboot flash vbmeta vbmeta.img
4. Wipe userdata.
Code:
fastboot -w
To install via TWRP:
1. Install stock firmware, complete one OTA update, then install TWRP in fastboot.
Code:
fastboot flash recovery TWRP.img
fastboot flash recovery_b TWRP.img
2. Format data in twrp, not wipe, format!
3.1. For GAPPS build, flash the rom, reboot, profit.
3.2. For Vanilla builds (if you want to install your own gapps) flash the rom, reboot to recovery, flash flame gapps basic package, reboot to system. If you dont want gapps, flash the Vanilla rom zip, reboot, profit.
4. If you want magisk, flash it in TWRP after booting the phone to the launcher homescreen once.

ROM Download Links
19-9-20 (Initial) Build - No GApps, Screen Recording Causes Reboot, ADB Broken
https://drive.google.com/file/d/1-ztGP-YYJRzRB8p-bLuMl3YWDw7mawm8/view?usp=sharing
20-9-20 Build - GApps Included, ADB Access Fixed, Screen Recording The Same
https://drive.google.com/file/d/16xXU4gbKOhcsNVOQREidrDeUDrnZN8jC/view?usp=sharing
10-11-20 Build - Updated to 3.11, November security patch. New boot.img included with hotspot fix and twrp decryption support (thanks vache and odin and samuel). GAPPS still included. Clean install recommended.
https://drive.google.com/file/d/1PfPLco3pcfJ-x-uBDuBWVMffY4vySorx/view?usp=sharing
21-11-20 Build - Still 3.11, Nothing new, No GAPPS build.
https://drive.google.com/file/d/1HZg7jNw5COVDiKbCw5Wfpd6OP95eqxNO/view?usp=sharing
22-12-20 Build - Fixed device detection (should display the correct device in settings now, thanks odin!), December Security patch, working screen recorder added to system and broken one's quick setting tile removed.
No Gapps Build
Gapps Included Build
23-6-21 Build - HavocOS 4.6!!!
Fixed screen recorder, fixed screen cast/mirroring (gapps build/vanilla with gapps installed), added Moto Camera 2 and Moto clock widgets, kernel upstreamed to .236 with kcal patches added, color control app added to tweak colour/saturation, June security patch. GAPPS and Vanilla builds, TWRP zips and Fastboot D images.
https://drive.google.com/drive/folders/1zhgC1r-FxnobhCG_CyO7aLbvMz8iiFMh?usp=sharing
07-08-21 build
Havoc-OS v4.8
Rebased to omni device trees.
Kernel upstreamed to 4.14.240
Tap to wake working.
(Stylus model only) Stylus should be working, may need to reopen stylus settings from time to time.
FM radio is BROKEN
https://drive.google.com/drive/mobile/folders/1v2WqTsdZHQcFg_NKaL7DbnBVn0KzzhQa?usp=sharing

Reserved

One Question
Hello this can be used in the motorola G8 power ?

Runs good thanks man this is the first custom rom to boot on my phone don't know what you did differently but your rom boots on my phone

Lightyear99 said:
Hello this can be used in the motorola G8 power ?
Click to expand...
Click to collapse
It should work on all sofia and rav variants, but is based on the same device trees as los/pe, so if those didnt work for you, this probably wont either.

Works flawlessly until now, I was on omnirom and decided to change to this one and I can't be more happier.. (sorry for the English folks).

Just switched to this ROM, and I'm glad it retains the moto gestures(like OmniROM), but double tap to wake ambient display seems to not work on both OmniROM and this one. Is anyone using this ROM able to use it? Thanks.

---------- Post added at 11:46 PM ---------- Previous post was at 11:45 PM ----------
i see 90Hz?
---------- Post added at 11:47 PM ---------- Previous post was at 11:46 PM ----------
Generic123. said:
Just switched to this ROM, and I'm glad it retains the moto gestures(like OmniROM), but double tap to wake ambient display seems to not work on both OmniROM and this one. Is anyone using this ROM able to use it? Thanks.
Click to expand...
Click to collapse
Whats about sound? its as good as stock?

Mikael1013 said:
---------- Post added at 11:46 PM ---------- Previous post was at 11:45 PM ----------
i see 90Hz?
---------- Post added at 11:47 PM ---------- Previous post was at 11:46 PM ----------
Whats about sound? its as good as stock?
Click to expand...
Click to collapse
it uses the stock moto sound app from the stock rom and it sounds just as good as stock rom.

Mikael1013 said:
---------- Post added at 11:46 PM ---------- Previous post was at 11:45 PM ----------
i see 90Hz?
---------- Post added at 11:47 PM ---------- Previous post was at 11:46 PM ----------
Whats about sound? its as good as stock?
Click to expand...
Click to collapse
The ROM has the Moto audio app, so it should be totally fine. It does seem to turn off intermittently, but I had those issues in omniROM as well.

Vibration/Haptic fixed kernel. Flash in fastboot:
Code:
fastboot flash boot <filename.img>
https://drive.google.com/file/d/1I9gK9qxJJAy5R2cqH7tRZM9OCYE65mmB/view?usp=sharing

Does 90hz really work and is the rom stable enough for a daily driver?

Beetle84 said:
To Install:
1. Extract the zip and open a shell with ADB and fastboot.
2. Reboot your device into fastbootd mode.
Code:
fastboot reboot fastboot
3. Flash boot, system, product, and vbmeta.
Code:
fastboot set_active a
fastboot flash boot boot.img
fastboot flash system system.img
fastboot flash product product.img
fastboot flash vbmeta vbmeta.img
OPTIONAL: fastboot flash recovery twrp.img
4. Wipe userdata.
Code:
fastboot -w
INITIAL BUILD: Then boot the phone to the homescreen. If you want to install GAPPS or magisk, power off and enter twrp (if you installed it, otherwise you can boot twrp temporarily), flash gapps and magisk, and reboot.
20-9-20 BUILD: Then boot the phone to the homescreen. If you want to install magisk, power off and enter twrp (if you installed it, otherwise you can boot twrp temporarily), flash magisk, and reboot.
If you have the Moto G8/G Fast and your display cutout is not right, enable your overlay like so:
Code:
adb shell cmd overlay enable org.omnirom.overlay.moto.rav
Click to expand...
Click to collapse
I downloaded Android Studio, so have latest Platform Tools...but when running in Fastboot the command fastboot set_active a is not recognized. Not sure why this ois.
---------- Post added at 07:12 PM ---------- Previous post was at 06:15 PM ----------
Mktcrasher said:
I downloaded Android Studio, so have latest Platform Tools...but when running in Fastboot the command fastboot set_active a is not recognized. Not sure why this ois.
Click to expand...
Click to collapse
Figured out fastboot and getting it working. Now flashing the rom and the command fastboot flash system system.img fails. "Resizing 'system_a' FAILED (remote: '') fastboot: error: Command failed"
Anyone experienced this?

Riverdog4635 said:
Does 90hz really work and is the rom stable enough for a daily driver?
Click to expand...
Click to collapse
Where did you see 90hz mentioned mate? In the first post there is mention of supporting screen refresh rates, not changing them from what i can see.
And its stable as all hell for me on the regular g8, just the bugs mentioned at the bottom of the first post.

i use g8 power XT2041-3, i follow all instruction but can't boot, stock on bootloader. can i flash it with twrp?

hi, this rom works in XT2041-1??
Have OTG active?

Skib32 said:
i use g8 power XT2041-3, i follow all instruction but can't boot, stock on bootloader. can i flash it with twrp?
Click to expand...
Click to collapse
So, don't boot?

Hi there, the touchscreen is not working for me on XT2041-4 after flashing. Is anyone else having the same problem? The flashing process went smoothly, but I did get an error message:
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot flash vbmeta vbmeta.img
target reported max download size of 805259264 bytes
sending 'vbmeta_a' (4 KB)...
OKAY [ 0.002s]
writing 'vbmeta_a'...
(bootloader) WARNING: vbmeta_a anti rollback downgrade, 0 vs 6
OKAY [ 0.015s]
finished. total time: 0.019s
Thanks in advance!

Development [ROM] LiteE RN10S Global 1.2

Hey guys, i present you one of my biggest projects so far:
LiteE RN10S Global!!!
This is probably the first MIUI mod for this device, althought it might not be the FIRST ROM, it's the FIRST MIUI MOD without that oversharpening effect. Keeping color schemes and everything working!
FEATURES:
Heavily Debloated
MIUI Dialer, contacts and messages (still uses google dialer for calling)
Removed a ton of tracers
Bootanimation from MIUI 12.5
Uses the chinese variant of Security Center and Miui Gallery
Mi Wallpaper with super wallpaper options
Voice Changer
Chinese Alpha Launcher
High-end icon animations
Genom Kernel by rama982 (on telegram)
and most importantly:
NO OVERSHARPENING!!! (don't worry i didn't delete PQ)
BUGS:
Mirror app doesn't work.
You tell me.
FIXES:
Reverted the MiuiAod for more stability
Added the Backup app back
Added the Mi Sound app back.
NOTES:
First boot may be laggy, don't worry, just set it up, and reboot.
CREDITS:
myst33d (on tg), for helping me a lot.
rama982 (on tg), for genom kernel.
@el0xren, for telling me about the app permissions.
And everyone else.
DOWNLOAD LINK:
Google Drive
Others will come soon.
KERNEL SOURCE: Here
ok but, how do we flash it?
REQUIREMENTS:
1. Unlocked bootloader.
2. Fastboot Drivers.
3. A brain.
Step by step:
1. Download the ROM, after it's done, extract it.
2. Rename the folder "LiteE". Nothing else.
3. Put your phone into fastboot mode, and execute the .sh (if you're on linux) or .bat (if you're on windows).
4. Wait until it finishes flashing, it will automatically reboot and close.
5. You're done!
ESPERIMENTAL:
There might be a way to flash this Mod without losing data. However this is not tested.
You need to already have MIUI Global 12.5.14 installed.
1. Same steps from before, but this time, execute the "flasher_no_userdata_md_udc" file.
Telegram Chats:
Support Group: https://t.me/LiteEDevelopmentGroup
Channel: https://t.me/LiteEDevelopmentChannel
​

Changelog:
- 1.3:
Working Mi Dialer with call recorder
New charging animation
Deodexed
Fixed flasher issue
I forgot
- 1.2.5:
Changelog in telegram
- 1.2:
MIUI Dialer, contacts and messages (still uses google dialer for calling)
Bootanimation from MIUI 12.5
Uses the chinese variant of Security Center and Miui Gallery
Chinese Alpha Launcher
High-end icon animations
- 1.1:
Never published on XDA
Added the vbmeta patcher in flasher script (this fixes that cannot boot into userspace error)
Changed boot sound and boot animation from Redmi Note 9T
MIUI Launcher Mod by Sipollo (removed)
High-end icon animations
Chinese version of Search (removed)
App Vault from MIUI 13 (removed)
Uses the chinese version of Mi Calendar (removed)
- 1.0:
Initial release

Wow nice., Hoping for more upcoming custom rom for our handset. Thanks

J6idot said:
Hey guys, i present you one of my biggest projects so far:
LiteE RN10S Global!!!
This is probably the first MIUI mod for this device, althought it might not be the FIRST ROM, it's the FIRST MIUI MOD without that oversharpening effect. Keeping color schemes and everything working!
FEATURES:
Heavily Debloated
Removed a ton of tracers
More colorful bootanimation
Uses the chinese variant of File Explorer, Security Center and Miui Gallery
Mi Wallpaper with super wallpaper options
Custom MiuiAod with "always on" function
Voice Changer
Genom Kernel by rama982 (on telegram)
and most importantly:
NO OVERSHARPENING!!! (don't worry i didn't delete PQ)
BUGS:
I have no idea how to test the Voice Changer function. Could anyone try this?
You tell me.
NOTES:
First boot may be laggy, don't worry, just set it up, and reboot.
CREDITS:
myst33d (on tg), for helping me a lot.
rama982 (on tg), for genom kernel.
@el0xren, for telling me about the app permissions.
And everyone else.
DOWNLOAD LINK:
Google Drive
Others will come soon.
KERNEL SOURCE: Here
ok but, how do we flash it?
REQUIREMENTS:
1. Unlocked bootloader.
2. Fastboot Drivers.
3. A brain.
Step by step:
1. Download the ROM, after it's done, extract it.
2. Rename the folder "LiteE". Nothing else.
3. Put your phone into fastboot mode, and execute the .sh (if you're on linux) or .bat (if you're on windows).
4. Wait until it finishes flashing, it will automatically reboot and close.
5. You're done!
ESPERIMENTAL:
There might be a way to flash this Mod without losing data. However this is not tested.
You need to already have MIUI Global 12.5.14 installed.
1. Same steps from before, but this time, execute the "flasher_no_userdata_md_udc" file.
Telegram Chats:
Support Group: not yet
Channel: https://t.me/LiteEDevelopmentChannel
​
Click to expand...
Click to collapse
big big work

Wow, Great work. Thanks. But is genome karnel stable?

Awesome work, might try it later

IamAlaminislam said:
Wow, Great work. Thanks. But is genome karnel stable?
Click to expand...
Click to collapse
yep

I can't seem to find the telegram channel for the genome karnel. Want to know the change log..

Can this work as a daily driver ROM? If anyone can post screenshots?
I had lost all hopes and already was planning to sell my 4 month old note10s.
If this can work as a daily driver ROM, I would keep the otherwise awesome device.

GildroY said:
Can this work as a daily driver ROM? If anyone can post screenshots?
I had lost all hopes and already was planning to sell my 4 month old note10s.
If this can work as a daily driver ROM, I would keep the otherwise awesome device.
Click to expand...
Click to collapse
why not? rom works perfectly fine

J6idot said:
why not? rom works perfectly fine
Click to expand...
Click to collapse
Thanks. Will try it out tonight

J6idot said:
why not? rom works perfectly fine
Click to expand...
Click to collapse
Getting the following error:
Code:
~/mnt/crucial/data/Phone/Note 10s/LiteE$ ./flasher.sh
product: secret
Step 1
Sending 'boot_a' (34128 KB) OKAY [ 1.233s]
Writing 'boot_a' OKAY [ 0.125s]
Finished. Total time: 1.371s
Rebooting into fastboot OKAY [ 0.002s]
< waiting for any device >
fastboot: error: Failed to boot into userspace fastboot; one or more components might be unbootable.
Sending sparse 'system' 1/21 (131064 KB) OKAY [ 3.708s]
Writing 'system' FAILED (remote: 'This partition doesn't exist')
fastboot: error: Command failed
There was a problem flashing the system.img.
Stuck into fastboot mode post this error.
Has anyone faced this issue?

GildroY said:
Getting the following error:
Code:
~/mnt/crucial/data/Phone/Note 10s/LiteE$ ./flasher.sh
product: secret
Step 1
Sending 'boot_a' (34128 KB) OKAY [ 1.233s]
Writing 'boot_a' OKAY [ 0.125s]
Finished. Total time: 1.371s
Rebooting into fastboot OKAY [ 0.002s]
< waiting for any device >
fastboot: error: Failed to boot into userspace fastboot; one or more components might be unbootable.
Sending sparse 'system' 1/21 (131064 KB) OKAY [ 3.708s]
Writing 'system' FAILED (remote: 'This partition doesn't exist')
fastboot: error: Command failed
There was a problem flashing the system.img.
Stuck into fastboot mode post this error.
Has anyone faced this issue?
Click to expand...
Click to collapse
this problem again, i know how to fix it.
1. get the vbmeta file.
2. type in the terminal "fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
3. Launch the installer again.

J6idot said:
this problem again, i know how to fix it.
1. get the vbmeta file.
2. type in the terminal "fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
3. Launch the installer again.
Click to expand...
Click to collapse
Will try again tonight post work. Many thanks.
J6idot said:
this problem again, i know how to fix it.
1. get the vbmeta file.
2. type in the terminal "fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
3. Launch the installer again.
Click to expand...
Click to collapse
Worked like a charm!!
Thanks a ton.

In this rom i am randomly get a "green screen" when held the phone. Only reboot can resolve this. I think a custom kernel do this. And don't work stock miui phone with call recorder, only Google phone and so. No perfect for me.

angel495 said:
In this rom i am randomly get a "green screen" when held the phone. Only reboot can resolve this. I think a custom kernel do this. And don't work stock miui phone with call recorder, only Google phone and so. No perfect for me.
Click to expand...
Click to collapse
yes yes, i already know about that green screen problem. The reason this happens is because of the custom MiuiAod. I will revert this in the next build.
And no, i'm not going to add miui dialer

J6idot said:
yes yes, i already know about that green screen problem. The reason this happens is because of the custom MiuiAod. I will revert this in the next build.
And no, i'm not going to add miui dialer
Click to expand...
Click to collapse
Iam flash your rom over Indonesian where be miui phone and etc., And they stop working. I need call record and working aod. Can we solve this issue? And on stock rom phone does not go in to the deep sleep, then screen is off, cpu continue work on low frequency... How about this rom? (can see a battery chart?)

angel495 said:
Iam flash your rom over Indonesian where be miui phone and etc., And they stop working. I need call record and working aod. Can we solve this issue? And on stock rom phone does not go in to the deep sleep, then screen is off, cpu continue work on low frequency... How about this rom? (can see a battery chart?)
Click to expand...
Click to collapse
ok so, miui dialer isn't going to work on global rom, and for aod use the one from stock firmware. I do not have it right now.

J6idot said:
ok so, miui dialer isn't going to work on global rom, and for aod use the one from stock firmware. I do not have it right now.
Click to expand...
Click to collapse
Can you get advise about make a change for in system and vendor folder (its write protect)... I am try edit a build.prop file, but then i save changes file just gone and i need make a reflash.

angel495 said:
In this rom i am randomly get a "green screen" when held the phone. Only reboot can resolve this. I think a custom kernel do this. And don't work stock miui phone with call recorder, only Google phone and so. No perfect for me.
Click to expand...
Click to collapse
J6idot said:
ok so, miui dialer isn't going to work on global rom, and for aod use the one from stock firmware. I do not have it right now.
Click to expand...
Click to collapse
For call recording you can use axet's call recorder. It's available on fdroid and is working fine so far, for me, with this rom.

[ROM][11] DerpFest R for OnePlus Nord N10 5G [UNOFFICIAL][BILLIE]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is a small project based on AOSP. We try to be a platform for beginners and support the Custom ROM community with our own unique contributions as well. This ROM exists thanks to inspiration of AOSiP, Thank you! #StayDerped
Code:
/* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Features
GApps included!
- Signed with release keys like stock
- Google network stack
- Google PSU support
- Google APN's and CarrierConfig
- Accent color, font, icon shape, icon pack customizations from Bootleggers
- Statusbar icons tuner
- App lock
- Face unlock
- Expandable volume panel
- Omni weather
- Gvisual Mod
- Advanced gesture navigation options
- FOD icon picker and wallpaper based color option
- FOD Animations
- Custom logo customizations
- Custom Carrier Label & Carrier Label Placement
- AOD Schedule options
- 3 finger swipe to screenshot
- Cycle through ringer modes
- Adaptive playback
- Long press power button to toggle flashlight
- Long press volume button to skip track
- Advanced reboot options
- Additional lockscreen sclocks
- QS tile styles
- Switch styles
- Custom QS headers
- Edge light options
- Battery light toggle
- Scrolling screenshot (Asus stitchimage)
- Battery icon styles (circle/bar/hidden)
- QS quick pulldown
- Bunch of useful QS tiles in addition to AOSP ones:
- AOD
- Caffeine
- Data Switch
- Location modes
- HeadsUp (peek notifications)
- Kill app
- Weather
- USB tethering
- Screenshot (partial/full)
- Sound (ringer modes)
- Sound search
- Reboot (system/recovery)
- Mono/Stereo
- Notifications clear all button
- OOS-inspired QS tiles layout
- Data usage under QS
- Small oreo-like data type icon
- Traffic indicator for wifi and mobile data
- OOS-inspired Network speed indicator
- VoLTE/VoWiFi multi-sim icon
- Lockscreen media art and blur level controls
- Improved statusbar pulldown blur
- Added blur to power menu
- Double tap to sleep on statusbar, launcher, lockscreen
- Finer control over font size
- Mini panels for wifi, bluetooth, NFC
- Per-app network restrictions
- Allow hotspot/tethering to use VPN (toggleable)
- Additional charging info on lockscreen
- Statusbar bluetooth battery level
- NFC tile for devices with nfc
- Multi SIM ringtone setting
- Screen recorder stop dot and low quality options
- Bring back 2 button navigation from pie
- Delete button for screenshots
- Show 3 QS columns when media player is inactive
- Faster fingerprint wakeup
- Pixel offline charging animation (for supported devices)
- Enabled iorap and zygote preforking (for faster app launch)
- One click to add/remove QS tiles
- Hacks to bypass safetynet and root detection
- Few pixel features like assist disclosure, live captions, adaptive connectivity
- Optimizations and fixes from AOSPA, ProtonAOSP & upstream AOSP master
- CAF functionality improvements/enhancements:
- Bluetooth A2DP hardware offload
- Audio policy extensions
- Camera extensions
- Telephony framework
- Individual sim toggle (for some dualsim devices)
- WiFi display/miracast
- Hardware accelerated screen recording
- NQ NFC support (for nfc supported devices)
- Power off alarm in inbuilt clock app
- Touch response optimizations
- Performance improvements & fixes throughout the system
What's broken?
DT2W
You tell me!
ROM: https://www.androidfilehost.com/?fid=17825722713688277214
MD5: E339DDE03A10FA105048BE3F524ECB94
RECOVERY: https://www.androidfilehost.com/?fid=17825722713688277217
MD5: 086AD719B76BEB04C2C910EE77765B89
INSTRUCTIONS
1. Download the ROM and Recovery image
2. Boot into bootloader/fastboot mode | [adb reboot bootloader]
3. Flash the Recovery image | [fastboot flash recovery recovery.img]
4. Boot into Recovery | [fastboot reboot-recovery]
5. Perform a Factory Reset/Wipe in Recovery
6. Go to Apply Update and choose Apply from ADB
7. Sideload the ROM | [adb sideload rom.zip]
Reboot and voila!
Follow us on Telegram​
Credit/Thanks:
Google for Android and AOSP
LineageOS
AOSiP
AICP
ABC ROM
AquariOS
BootleggersROM
PixelExperience
OmniROM
Cory Collins
---------
Any others we may have forgotten to credit
And last but not the least, all our testers, who have helped us to squash many bugs so that we can try to release builds that as are flawless as possible
DerpFest, ROM for the OnePlus Nord N10 5G
Contributors: @iamsaalim, @kronflux
ROM source: https://github.com/DerpFest-11/
Device sources: https://github.com/kronflux/device_oneplus_billie
Kernel source: https://github.com/danascape/kernel_oneplus_sm6350
ROM OS Version: 11.x
ROM Kernel: 4.19.125
ROM Firmware Required: OxygenOS 11.x
Based On: AOSP
Version Information
Status: Beta
Created 27-01-2022
Last Updated 27-01-2022

Old post
I keep getting error 7 / status 1 after the sideload.
How does one update the full system to android 11, like MSM tool or equivelant? Or is this only possible as OTA?
EDIT: @kronflux
Just wanted to mention that I did start from a clean flash (MSM Tool - but of course that is android 10), and subsequently re-unlocked the bootloader, but still no dice. I know I'm missing something I just can't figure what.
Usually I would upgrade to the same android version as the custom os (11 in this case) and I did try that once as well, and it still didn't work.
What is the legit way to update both slots to a new stock OS so that users can flash an upgraded custom OS?
I am still reading everything I can in this device forum, trying to figure out what I missed.
I finally managed to get this ROM flashed. Seems that, at least in my case, the ROM flash doesn't cause the slot to be switched after reboot. I need to basically do this:
(optional) - Boot to opposite desired slot.
Flash Recovery
Boot to recovery
Factory Reset
Flash Rom (sideload)
Reboot to bootloader
change slots
Reboot to bootloader again (ensure slot change)
(optional) Flash Recovery to new/current slot
(optional) Then Flash GApps (if allowed for the ROM, not this one as GApps are included)
Boot ROM from bootloader
This manual slot change is not something I see from any of the instructions on this entire device sub forum, even for other posted/supported ROMs. I know that usually the slot change is automatic, but in my case for some reason it is not.

Move...

I asked if this can be flashed over the earlier beta as-is ?
I did so earlier with the beta using TWRP, but it was originally installed on A10.

I don't have any issues with sideloading any rom but this one i keep getting "adb: failed to read line: no error"

CodeNotSoGenious said:
I don't have any issues with sideloading any rom but this one i keep getting "adb: failed to read line: no error"
Click to expand...
Click to collapse
turns out minimal adb and fastboot wasn't working so I had to use android sdk tools

gaww said:
Move...
Click to expand...
Click to collapse
Once again - can I flash over original one with TWRP?

TheArkive said:
Old post
I keep getting error 7 / status 1 after the sideload.
How does one update the full system to android 11, like MSM tool or equivelant? Or is this only possible as OTA?
EDIT: @kronflux
Just wanted to mention that I did start from a clean flash (MSM Tool - but of course that is android 10), and subsequently re-unlocked the bootloader, but still no dice. I know I'm missing something I just can't figure what.
Usually I would upgrade to the same android version as the custom os (11 in this case) and I did try that once as well, and it still didn't work.
What is the legit way to update both slots to a new stock OS so that users can flash an upgraded custom OS?
I am still reading everything I can in this device forum, trying to figure out what I missed.
I finally managed to get this ROM flashed. Seems that, at least in my case, the ROM flash doesn't cause the slot to be switched after reboot. I need to basically do this:
(optional) - Boot to opposite desired slot.
Flash Recovery
Boot to recovery
Factory Reset
Flash Rom (sideload)
Reboot to bootloader
change slots
Reboot to bootloader again (ensure slot change)
(optional) Then Flash GApps (if allowed for the ROM, not this one as GApps are included)
Boot ROM from bootloader
This manual slot change is not something I see from any of the instructions on this entire device sub forum, even for other posted/supported ROMs. I know that usually the slot change is automatic, but in my case for some reason it is not.
Click to expand...
Click to collapse
Slot logic, I guess.
It was b slot on the old roms because we started out on A as the active partition, so maybe we just have to switch to the inactive slot when flashing.
Realized this a couple nights ago, but my device went into kernel panic anyway so I couldn't really verify.
Thank you.

gaww said:
I asked if this can be flashed over the earlier beta as-is ?
I did so earlier with the beta using TWRP, but it was originally installed on A10.
Click to expand...
Click to collapse
No, this has to be installed over A11.
This rom depends on the updated kernel, so flashing over a new version of the ROM won't just work.

Hello, I am encountering this error, 'adb: failed to read command: No error', what is the problem?

kinfrayt said:
Hello, I am encountering this error, 'adb: failed to read command: No error', what is the problem?
Click to expand...
Click to collapse
Update your adb.
https://forum.xda-developers.com/t/...latest-official-adb-fastboot-drivers.4228853/

ninjasinabag said:
Update your adb.
https://forum.xda-developers.com/t/...latest-official-adb-fastboot-drivers.4228853/
Click to expand...
Click to collapse
I downloaded too much adb, I changed the version, it didn't work no matter what I did. Qualcomm went all the way to crushdumb mode.
The operation was not successful. I am using Android 11.
My device Oneplus n10 5G BE86AA
I tried 10-15 times but all failed. I would really appreciate it if anyone can help me out and have had this problem.
I'm using google translate, it may be misspelling.

For everyonw that have problems by sideloading. I recommend to use exactly the recovery they provide there, don't even thing using twrp or orange fox, because those sideload are just broken.
also, the standard fastboot drivers include x86 adb, that would not work correctly always.
SDK Platform Tools release notes | Android Studio | Android Developers
Android SDK Platform-Tools is a component for the Android SDK.
developer.android.com
download this, and use adb sideload rom.zip exactly with those tools. for me, it was the single thing that did worked.
Later Edit: needed to change the A/B Slot
# boot the phone into fastboot either if in the bootloader
#
sudo fastboot reboot fastboot
#
# or if the phone is booteind into the recovery or in the normal mode
#
adb reboot fastboot
# wait until the phone is booted in fastboot mode
# get the current slot
#
sudo fastboot getvar current-slot
# change the current slot
#
sudo fastboot set_active b
# check the result
#
sudo fastboot getvar current-slot
# reboot the phone from new current-slot
#
sudo fastboot reboot

gherv1 said:
For everyonw that have problems by sideloading. I recommend to use exactly the recovery they provide there, don't even thing using twrp or orange fox, because those sideload are just broken.
also, the standard fastboot drivers include x86 adb, that would not work correctly always.
SDK Platform Tools release notes | Android Studio | Android Developers
Android SDK Platform-Tools is a component for the Android SDK.
developer.android.com
download this, and use adb sideload rom.zip exactly with those tools. for me, it was the single thing that did worked.
Later Edit: needed to change the A/B Slot
# boot the phone into fastboot either if in the bootloader
#
sudo fastboot reboot fastboot
#
# or if the phone is booteind into the recovery or in the normal mode
#
adb reboot fastboot
# wait until the phone is booted in fastboot mode
# get the current slot
#
sudo fastboot getvar current-slot
# change the current slot
#
sudo fastboot set_active b
# check the result
#
sudo fastboot getvar current-slot
# reboot the phone from new current-slot
#
sudo fastboot reboot
Click to expand...
Click to collapse
Well, most people are using gsi Roms on this phone. I am running Crdoid android 13 April 2023 build and security patch on my nord n10 5g with magisk and 5 volte/vo5g both working

Im quite liking this rom, but i keep getting a QUALCOMM CrashDump Mode a bit after plugging it in to charge at night... it sticks in this mode until i hard reset, then its fine. The lack of auto-reboot really sucks since i cant trust this phone as an alarm right now.
Also, this doesnt happen every time i plug it in... seems to be about every other night so far, might be related to how low the battery gets, not sure.
Running this on a BE2026 model on Cricket (ATT network), also have done some customization installing magisk and a few modules... im pretty sure the first crash was before i had all the modules installed, but ill be trying to disable some of them and see if it helps at all. its hard to test something when there's not an easy way to trigger it...
There is an error included too, been trying to decrypt it but not having a lot of luck:
Code:
EX:kernel:0x0:SNS_SEE_P_1:0x1000000e:PC=0xf02baadc:LR=0xf0215f78
subsys_err_fatal_intr_handlersubsys-restart: Resetting the SoC - adsp crashed.
subsys_unregister

Another SERIOUS issue I discovered today - I cant disable wireless emergency alerts. The settings app will crash when I try to open the settings for it, and trying to get to it from the messages app does nothing. It seems there's no way to turn off these ridiculously loud amber alterts.

jamescable said:
Well, most people are using gsi Roms on this phone. I am running Crdoid android 13 April 2023 build and security patch on my nord n10 5g with magisk and 5 volte/vo5g both working
Click to expand...
Click to collapse
Hi!
In the CrDroid GSI, Did you experience any sort of bugs regarding calling?
I've also experience some bugs/quirks like the "high pitched voice" while calling someone through Internet apps like Signal/WhatsApp/Anyotherapp.