Hi buds, how i can know if my s10 is charging fast through wireless. I have one Huawei CP60: https://consumer.huawei.com/en/accessories/wireless-charger/
And i bought from gearbest 15eur (without wall adapter) promo in February.
When i put my s10 charging i get wireless charging message. But I'm sure i can't get fast wireless charging.
Any help? This wireless charger don't support? The original wall adapter from s10 don't feed enough to get fast wireless charging?
When you put in on the charger, if it says "wirelessly charging" it's normal speed, if you see "rapidly" then it's fast charging. I don't think it's the wireless pad that makes a difference, it's the power block. I tried a 20$ cheap wireless charging pad with an old HTC power block and the phone says "wirelessly charging". If I use the samsung power block that came with the phone, it says something like "rapidly charging wirelessly".
jocaboss said:
Hi buds, how i can know if my s10 is charging fast through wireless. I have one Huawei CP60: https://consumer.huawei.com/en/accessories/wireless-charger/
And i bought from gearbest 15eur (without wall adapter) promo in February.
When i put my s10 charging i get wireless charging message. But I'm sure i can't get fast wireless charging.
Any help? This wireless charger don't support? The original wall adapter from s10 don't feed enough to get fast wireless charging?
Click to expand...
Click to collapse
Do you have Fast Wireless charge enabled? I have the plus but assume it is the same.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
andee39 said:
Do you have Fast Wireless charge enabled? I have the plus but assume it is the same.
Click to expand...
Click to collapse
I can't find this option. When you get that?
jocaboss said:
I can't find this option. When you get that?
Click to expand...
Click to collapse
Search for fast in the options. It's in the accessories section.
jocaboss said:
I can't find this option. When you get that?
Click to expand...
Click to collapse
Settings - Advanced Options - Accessories. It is also listed in the Battery settings.
andee39 said:
Settings - Advanced Options - Accessories. It is also listed in the Battery settings.
Click to expand...
Click to collapse
Thanks but seems my s10 don't have that option. It's Exynos Portuguese TPH s10... ?
jocaboss said:
Thanks but seems my s10 don't have that option. It's Exynos Portuguese TPH s10... [emoji26]
Click to expand...
Click to collapse
Ah yes, am not familiar with Exynos version. Did you try as suggested to search fast charging in main Settings window? Maybe it is under a different category.
jocaboss said:
Hi buds, how i can know if my s10 is charging fast through wireless. I have one Huawei CP60: https://consumer.huawei.com/en/accessories/wireless-charger/
And i bought from gearbest 15eur (without wall adapter) promo in February.
When i put my s10 charging i get wireless charging message. But I'm sure i can't get fast wireless charging.
Any help? This wireless charger don't support? The original wall adapter from s10 don't feed enough to get fast wireless charging?
Click to expand...
Click to collapse
You can monitor the actual mAmps output supplied to your phone by your wired/wireless charger using CPUX app. (free). Personally, I don't use wireless charging, am not sold on it, but anyways, the app will help you figure out how fast is the charging going on at any given time during the process. I use the orig. charger and when I plug it @ 25-30% it shows the mA input just below 3000 then gradually reduced until fully charged. My desktop USB 3.O gets only up tu 900mA.
Here are two screenshots of cpux if you're not familiar with that appk.
mzsquared said:
You can monitor the actual mAmps output supplied to your phone by your wired/wireless charger using CPUX app. (free). Personally, I don't use wireless charging, am not sold on it, but anyways, the app will help you figure out how fast is the charging going on at any given time during the process. I use the orig. charger and when I plug it @ 25-30% it shows the mA input just below 3000 then gradually reduced until fully charged. My desktop USB 3.O gets only up tu 900mA.
Here are two screenshots of cpux if you're not familiar with that appk.
Click to expand...
Click to collapse
Floats between 870 and 950mA. I don't know the charging voltage
jocaboss said:
Floats between 870 and 950mA. I don't know the charging voltage
Click to expand...
Click to collapse
Not very fast, there's some convenience in wireless charging, but I'm not a fan of it.
Thermal battery throttling as of 38°C?
My Galaxy S10 (EU/Exynos, stock) starts to reduce charging power from 11W to 6W above 38°C battery temperature. Test have been made with different original fast charging power supplys and wireless chargers. When i use a fan to cool no power throttling at all. It's summer now in Switzerland and i stated much higher charging time. Normal?
jocaboss said:
Thanks but seems my s10 don't have that option. It's Exynos Portuguese TPH s10... ?
Click to expand...
Click to collapse
Strange. My s10 is exynos as well and the option is there. I use wireless charging occasionally for convenience but prefer cable charging (set to standard mode). If plug in Samsung charger it says Fully charged in 1hour 20 minutes. With other charger (Huawei) it says 2 hours 30 minute. So I think it depends on the plug and its output power. Also I charging my phone when it is around 10%.
Oh and one more thing: if using wireless charging phone gets hot.
Temperature Considerations for Charging Li-Ion Batteries: Inductive versus Mains Char
Some scientific points on wireless charging:
https://pubs.acs.org/doi/10.1021/acsenergylett.9b00663
mzsquared said:
Some scientific points on wireless charging:
https://pubs.acs.org/doi/10.1021/acsenergylett.9b00663
Click to expand...
Click to collapse
Means that Samsung reduces charging power as of 38°C to prevent more heat and therefore reduced battery life... makes sense.
Gesendet von meinem SM-G973F mit Tapatalk
Related
A review for the following products:
Tenergy AC Wall Fast Charger with Qualcomm® Quick Charge™ 2.0 technology
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Powermod Quick Charge 2.0 Certified D/C In-Vehicle Car USB Charger
Both chargers are as fast as advertised over my stock HTC A/C charger that came with the phone and my Rockfish car charger I've been using since my HTC Vivid days.
They both came in nice retail packaging and the Powermod car charger comes with a nice (but short) USB cable. The Tenergy wall charger has an LED on it and it is blue when an non QC 2.0 device is plugged in and turns green when a QC 2.0 compliant device is plugged in. Unfortunately the car charger doesn't have this feature. It has a blue light that rings the device but only indicates that it has power. It doesn't change color when a QC 2.0 compliant device is plugged in.
I have found that both of these chargers will not charge my Asus Transformer TF201. I find this strange because I've used other USB style wall chargers with my Asus data cable (the transformer has a proprietary changing port connector) that worked just fine. Still doing research on that one but I'll not be using these to charge my tablet. I just wanted to point this out as some of these QC manufactures say they are backwards compatible with most devices. YMMV.
I've been using both for about 3 weeks and am very happy with the performance of both units.
Below is data from a series of comparison tests to show how much faster the Qualcomm QC 2.0 chargers are over stock type chargers. The data in the HTC vs. Tenergy charger is an average of 4 charges per device. The HTC vs. Tenergy temperature comparison chart is through one full charge cycle from below 20% to 100%. As you can see the QC 2.0 does charge at a higher temperature. I also took the temperature while charging on QC 2.0 with my DotView case on and at 50% the temperature on the back of the case was 91.4 F. I have taken my phone temperature after heavy gaming and the back has actually gotten hotter just playing games than at any time during the charging cycle with QC2.0. I used a IR handheld thermogun we use at work.
The Powermod and Rockfish data is from my commute to and from work that is on average 30 minutes. There are 4 charge cycles for each devise over a 30 minute period.
Conclusion:
The performance of both units is great compared to stock. Since I can already get a full day worth of battery with between 15 and 20% left after a typical day both these chargers just make life easier. If you have to go somewhere but still have 30 minutes before you leave you can "top off" your battery before leaving if you are low. Example, you realize you have less than 10% battery but have some time before you have to leave. Plug you QC 2.0 charger in and get to at least 50% in that time. I feel much better walking out the door with 50% than 10%. With the car charger you can keep your battery "topped off" between destinations. Time will tell on the longevity of the phone battery and the chargers themselves.
I hope you've found this helpful.
I recommend both of these units.:good:
Images do not work here...
OP,
Some links would be nice. I rarely ever have any issues with running out of power like you have stated. I usually charge while i'm at my desk at work all day, and when I sleep at night, and I never have had an issue with an empty battery. I'm sure some people do have trouble with that; like those who spend all day on the phone, but I'd like to see which products you are talking about, OP.
Thanks!
waynerbbx said:
OP,
Some links would be nice. I rarely ever have any issues with running out of power like you have stated. I usually charge while i'm at my desk at work all day, and when I sleep at night, and I never have had an issue with an empty battery. I'm sure some people do have trouble with that; like those who spend all day on the phone, but I'd like to see which products you are talking about, OP.
Thanks!
Click to expand...
Click to collapse
I'm pretty sure this and this is what OP has in mind, but I could be wrong.
Actually I'm not sure why my pictures are not showing up. I have my pictures set to public. I'll move them and try another location as soon as I get to work.
I see the pictures.........anyone else see them?
Pictures are working now. And holy cow..that's some impressive work Thanks for taking the time to test it all!
Thanks for the input.
I have the Tenergy wall charger and I have been pleased with the results. I will probably buy the same car charger you have next.
Glad everyone seeing the data now. I put this together because of all the questions on QC 2.0 that past few months.
BTW - I do crap like this all the time at work so it really wasn't that much work other than gathering the data. The charts etc took less than an hour to create after I had all the data I wanted.
Cheers mate!
Great data indeed
Sent using Tapatalk
abyssis said:
I'm pretty sure this and this is what OP has in mind, but I could be wrong.
Click to expand...
Click to collapse
Interesting! Thank you for sharing the links!
Thanks for your input M8!
Nice review,thanks!
I bought the car charger and it is not turning green when I plug my phone into it. Do I need to do something different?
Phrostbite said:
I bought the car charger and it is not turning green when I plug my phone into it. Do I need to do something different?
Click to expand...
Click to collapse
The car charger doesn't indicate if it's charging at QC 2.0 specs. Only the wall charger does that. The only way you can tell that the car charger is doing it's QC 2.0 is by the battery level or using an inline USB current meter that will show the charge rate.
Sorry for the confusion, I'll update my review.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Its Charges my G4 @ 7.5V Aukey 10 000 mAh Power Bank QualComm Quick Charge 2.0 for $30 @ Amazon. The best thing also this Power Bank take charges from Quick Charge 2
0 charger too. So it will charge up fast too.
Sent from my LG G4 H815 International 4G LTE
Link?
PunishedSnake said:
Link?
Click to expand...
Click to collapse
http://www.amazon.com/gp/product/B00UBDI7EC?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00
Can you get two full G4 charges out of it ? (I know it says 10k, i know they are supposed to be 67% of what's said on the label, i'm curious to know real data,)
buh.. in UK it's 19 pounds.. And that is 34 euro
Theuntje said:
buh.. in UK it's 19 pounds.. And that is 34 euro
Click to expand...
Click to collapse
Not too bad, the plug in chargers are £15 in UK, when I've seen them for $10 on amazon in the US...
What app are you using to see your charge rate?
Coniac said:
What app are you using to see your charge rate?
Click to expand...
Click to collapse
Ampere
Sent from my LG G4 H815 US 4G LTE
had one like this before. it has max 2000mAh if i measure it by the %% it gives to the phone. I believe they use very cheap cells and just print whartever figure for capacity on it.
That charger does not work. At least not for the T-Mobile model. I'm convinced that Quick Charge 2.0 isn't activated. I've tired three different Aukey chargers (wall, portable, car) and QC does not work with any of them.
Sent from my LG-H811 using Tapatalk
partylikeaninjastar said:
That charger does not work. At least not for the T-Mobile model. I'm convinced that Quick Charge 2.0 isn't activated. I've tired three different Aukey chargers (wall, portable, car) and QC does not work with any of them.
Sent from my LG-H811 using Tapatalk
Click to expand...
Click to collapse
Works on my model just fine...
WinDroidGuy said:
Works on my model just fine...
Click to expand...
Click to collapse
The G4 already charges fast. Did you compare actual charge times from the stock charger starting at the same level with your quick charger? Because I did and they all charged at exactly the same rate as the stock charger.
A full charge from the portable charger took the same amount of time as a full charge with the stock charger. For the wall charger, put my phone at 20% on the stock charger and my girlfriend's phone on the quick charger at 20% and they both hit 40% at the same exact time. The car charger similarly charged at the same rate.
Which model phone do you have?
I got a couple of these on Amazon for a little over $9.00 each using this coupon code: GOQL7EVL Not sure if it will still work because I ordered mine the other day. Since I have prime they were delivered second day air free.
Edit: I just checked the code still works.
Here: http://www.amazon.com/KMASHI-Thunde...id=1434139689&sr=1-1&keywords=KMASHI+10000mAh
rogconnect said:
Click to expand...
Click to collapse
The charger doctor Max is 7.0V, so I'm sure it charge @9V (Not 7.5V). You should use 13V USB Meter.
When you charged the Aukey, what's the Voltage showed ...5V or 7V ?
dealova2008 said:
The charger doctor Max is 7.0V, so I'm sure it charge @9V (Not 7.5V). You should use 13V USB Meter.
When you charged the Aukey, what's the Voltage showed ...5V or 7V ?
Click to expand...
Click to collapse
Yes...i realized that this USB DOCTOR max 7.0V
When charging the Power Bank with QC charger its shown 7.5 V too.
So far very impressive compare to others.
Sent from my LG G4 H815 US 4G LTE
rogconnect said:
Yes...i realized that this USB DOCTOR max 7.0V
When charging the Power Bank with QC charger its shown 7.5 V too.
So far very impressive compare to others.
Sent from my LG G4 H815 US 4G LTE
Click to expand...
Click to collapse
Yeah...same as my charger doctor below
my Wall charger (comes with the Phone) charges @ the same Rates, max was 1670 (readout from ampere),
a full charge (from 6%to 100) goes under 2h, will test that tomorrow
I bought Drok usb multimeter, it is up to 10V
http://www.amazon.com/DROK-Multimet...442037840&sr=1-1&keywords=drok+usb+multimeter
comes with metal case, feels not cheap. I have not tried it in QC 2.0 as of now my Normal fast charger gives me 5.4V and 1.6A ,
and I am here to see what QD 2.0 Power bank is Good.
---------- Post added at 02:31 PM ---------- Previous post was at 02:29 PM ----------
partylikeaninjastar said:
The G4 already charges fast. Did you compare actual charge times from the stock charger starting at the same level with your quick charger? Because I did and they all charged at exactly the same rate as the stock charger.
A full charge from the portable charger took the same amount of time as a full charge with the stock charger. For the wall charger, put my phone at 20% on the stock charger and my girlfriend's phone on the quick charger at 20% and they both hit 40% at the same exact time. The car charger similarly charged at the same rate.
Which model phone do you have?
Click to expand...
Click to collapse
maybe you should update to latest firmware.
makwell24 said:
I bought Drok usb multimeter, it is up to 10V
http://www.amazon.com/DROK-Multimet...442037840&sr=1-1&keywords=drok+usb+multimeter
comes with metal case, feels not cheap. I have not tried it in QC 2.0 as of now my Normal fast charger gives me 5.4V and 1.6A ,
and I am here to see what QD 2.0 Power bank is Good.
---------- Post added at 02:31 PM ---------- Previous post was at 02:29 PM ----------
maybe you should update to latest firmware.
Click to expand...
Click to collapse
There's nothing to update, but thanks.
Sent from my LG-H811 using Tapatalk
rogconnect said:
Its Charges my G4 @ 7.5V Aukey 10 000 mAh Power Bank QualComm Quick Charge 2.0 for $30 @ Amazon. The best thing also this Power Bank take charges from Quick Charge 2
0 charger too. So it will charge up fast too.
Sent from my LG G4 H815 International 4G LTE
Click to expand...
Click to collapse
I believe there is a button in the usb doctor to see the ampere it reads. can you take a picture of it too? I really don't trust Ampere app that much. since in the cellphone of my brother, it reads 3.0 A (3000mA), although the charger could only supply 1.8A.
*Disclaimer*.....the S7 does not support Quick Charge 3.0. It only supports 2.0 but I may be picking up the G5 or HTC 10 which does support it.
I needed a new/extra charger so I figured I'd get something that supports the latest Quick Charge technology.
The charger itself feels well made. The prongs fold in for traveling purposes and it doesn't block the outlet/outlets sitting next to it. In regards to noise this charger makes none of it. Those who have used cheap chargers know the humming/buzzing noise I'm referring to. It's extremely annoying.
Now onto the part that really matters. I haven't had the time to compare this charger to the stock Samsung charger in regards to really putting them through the paces but early results look promising for the Anker.
I started the charge process with quick charge enabled at 5% and started a timer for 30 minutes. The stock Samsung charger was able to bring the battery to 43% while the Anker charger brought the battery to 52%.
Within the next few days I will do a test from 5% to 100% both with quick charge enabled and disabled.
On a side note I also picked up a 6 foot kevlar wrapped Anker micro USB cable. It feels well made and the connections are nice. I probably wouldn't have bought it if it wasn't on sale but I needed a new long micro USB cable.
So far I'd have to say that if you need another charger and you want Quick Charge 3.0 for another phone then go ahead and grab one. If you don't really need another charger or don't need Quick Charge 3.0 then I wouldn't waste the money on one unless you really want the slightly faster charging for the S7 Edge.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my SM-G935T using Tapatalk
silly noob question alert:
Will qc 3.0 devices, charge the s7 edge at qc 2.0/fast charge rates?
Assuming you used an s7 for your charging experiments above, then it appears they do....thanks for post
dazzer1975 said:
silly noob question alert:
Will qc 3.0 devices, charge the s7 edge at qc 2.0/fast charge rates?
Assuming you used an s7 for your charging experiments above, then it appears they do....thanks for post
Click to expand...
Click to collapse
No, it will charge at the same speed as a QC 2.0 charger since there S7/S7E don't support QC 3.0
That's exactly what I asked, re qc2.0 but thanks for clarification, I wasn't sure if qc3.0 was 'backwards compatible' kind of thing
dazzer1975 said:
That's exactly what I asked, re qc2.0 but thanks for clarification, I wasn't sure if qc3.0 was 'backwards compatible' kind of thing
Click to expand...
Click to collapse
It is backwards compatible with QC 2.0. I did a test of those chargers QC 2.0/3.0, Wireless, fast wireless that you can see in my signature. The charge times are identical as you will see.
awesome, cheers dude
dazzer1975 said:
silly noob question alert:
Will qc 3.0 devices, charge the s7 edge at qc 2.0/fast charge rates?
Assuming you used an s7 for your charging experiments above, then it appears they do....thanks for post
Click to expand...
Click to collapse
Yes, quick charge 3.0 compatible with all qc2.0 supported devices, like S7 edge.
So I search on Amazon and find that Anker, iClever, Aukey released their new quick charge 3.0 usb chargers.
Could you check the numbers with Galaxy Charging Current?
When you refer to the Samsung stock charger, do you mean the wired one or the Samsung Fast Charge wireless charger?
A_N_D_R_E said:
Could you check the numbers with Galaxy Charging Current?
When you refer to the Samsung stock charger, do you mean the wired one or the Samsung Fast Charge wireless charger?
Click to expand...
Click to collapse
Wired. I have no use for wireless chargers.
Once you go wireless you don't go back. lol I hate wires. I have four wireless chargers. Three were pretty much free. With T-Mobile Jump (phone junkie) I just sell my fast charging cablez and headphones for a few bucks since I don't need anymore. So why didn't Samsung put 3.0 charging in the S7 Edge?
I guess they designed the phone before quick charge 3.0 was available? Maybe it hurt they're bottom line? I don't know but whatever the reason it was a stupid decision.
The reason I don't like wireless chargers is because the only time I ever charge my phone is either in the car or while laying in bed. In both places I like using the phone while it charges.
Sent from my SM-G935T using Tapatalk
jrwingate6 said:
I guess they designed the phone before quick charge 3.0 was available? Maybe it hurt they're bottom line? I don't know but whatever the reason it was a stupid decision.
The reason I don't like wireless chargers is because the only time I ever charge my phone is either in the car or while laying in bed. In both places I like using the phone while it charges.
Sent from my SM-G935T using Tapatalk
Click to expand...
Click to collapse
No, QC has it as part of the SoC, si its supported technically but Samsung chose not to use it for an unknown reason.
They disabled it in the Snap dragon version because the other phone with their own SOC wouldn't support it so to keep the 2 on parity they disabled ours.
Ok I got my 128gb card and my Samsung wireless convertible charger today. I also have last year's wireless charger. I set my new wireless charger up and when connected my phone it says charging. When I put my phone on my older one it says fast charging. Also when I put it on the wall plug it says fast charging. Is anyone else having these problems?
Nope. My new Samsung charger came with a new adaptive fast charge adapter and usb c cable. Says fast charging. I'd never spend that much on a Samsung model. Still doesn't charge properly in portrait mode. My $15 youshare wireless fast charge base works just as well
Sent from my SM-N950U using Tapatalk
pyraxiate said:
Nope. My new Samsung charger came with a new adaptive fast charge adapter and usb c cable. Says fast charging. I'd never spend that much on a Samsung model. Still doesn't charge properly in portrait mode. My $15 youshare wireless fast charge base works just as well
Click to expand...
Click to collapse
I figured it out I have a 3.0 charging hub and when it is connected to that it does not fast charge. But if I hook my phone straight to the hub it fast charges. So it has to be a Samsung wall plug for it to fast charge.
Yup I have a 6 port anker qc hub but the fast chargers all require the stock wall adapter for some reason. The aftermarket ones are the same way
Sent from my SM-N950U using Tapatalk
pyraxiate said:
Yup I have a 6 port anker qc hub but the fast chargers all require the stock wall adapter for some reason. The aftermarket ones are the same way
Click to expand...
Click to collapse
The Samsung wireless charger from last year works on my Anker hub. It's just the new one. Not a big deal its not like it's going to charge any faster.
pyraxiate said:
Yup I have a 6 port anker qc hub but the fast chargers all require the stock wall adapter for some reason. The aftermarket ones are the same way
Click to expand...
Click to collapse
Hmmm ..
I've got a qc 2.0 tronsmart 5 port charger and am using a pleson fast charger and my note8 fast charges.. basically no Samsung charging gear at all yet still achieve fast charging
statikk1 said:
Hmmm ..
I've got a qc 2.0 tronsmart 5 port charger and am using a pleson fast charger and my note8 fast charges.. basically no Samsung charging gear at all yet still achieve fast charging
Click to expand...
Click to collapse
It could be charger specific using different protocols. I have an Mbox 4 port qc 2.0 car charger that will not charge the note 8 in fast charge mode. I had to purchase another charger that is qc 3.0 to get it working.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my SM-N950U using Tapatalk
Notice the packaging for the new (Note 8) Convertible charger has been changed to a slimmer, nicer box. Wonder if they changed the charger it's self?
I have noticed mine will only say wireless charging and not fast wireless charging sometimes. If I take the phone off and pit it back on it jump to fast wireless charging.
Model: CLT-AL00 (Dual SIM)
Build: 8.1.0.131 (C675)
Location: India
Chargers tested: Original box charger, Tronsmart Quick Charge 2.0 charger, Choetech Quick Charge 2.0 power bank
How is the charging speed for you guys? It has been over 24 hours since I received this phone and charging is too slow for me.
First of all Huawei cheated us Indians by not bundling supercharger and choosing to include a 9V/2A charger instead. It would have been great if the phone charged at least to that spec.
In 30 minutes, my P20 Pro charges about 14% (i.e. from 4% to 18%). And I wasn't using the phone. I first tried the charger/cable that came with it (upon which the phone displays fast charging) then my old Tronsmart Quick Charge 2.0 charger and finally Choetech QC 2.0 16000mah power bank. Although Huawei does not use QC, it should at least charge on 5V/2A speeds.
I used a USB meter to measure the output and was surprised that the phone uses only 5V/0.8A regardless of whether the screen is on or off. My S8+ uses 8.8V/1.6A (with Tronsmart and Choetech) while the screen is off and 5V/1.5A when the screen is on. At 5V/0.8A speed it could take 3 or 4 hours to charge the massive 4000mah battery.
What about you guys? I am wondering if I have a defective hardware and should replace within the window.
Also considering the phone supposedly uses "AI" everywhere to learn your patterns, did the charging speed improve over time or has it been the same since day 1?
You will only get fast charging with the 1st party charger. Its proprietary technology.
Sent from my CLT-L29 using Tapatalk
Yep, Supercharger needed. Mine will pull 2A on an Anker QuickCharge 2.0 charger using the original USB cable though.
orangecroc said:
You will only get fast charging with the 1st party charger. Its proprietary technology.
Sent from my CLT-L29 using Tapatalk
Click to expand...
Click to collapse
I understand that. But even 1st party charger is only drawing 5V/0.8A power, just like a 3rd party charger.
Any 2A charger (1st party or not) should be capable of providing at least 5V/1.8A power. But here it isn't, which is why I am wondering if this is an issue with the my particular phone itself.
Does it have this written on the 1st party charger?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my CLT-L29 using Tapatalk
orangecroc said:
Does it have this written on the 1st party charger? View attachment 4503211
Sent from my CLT-L29 using Tapatalk
Click to expand...
Click to collapse
We don't get supercharger here in India. We get a 2A fast charger.
you will have to buy a supercharger from ebay.in. I just bought one for INR 1800
Quick charge should still give you at least 40% in 30 minutes. Your phone seems faulty to me
Hi, I have P20 Pro from over a week. I replaced Mate 10 Pro with P20 Pro and I don't understand why P20 Pro charges slower in my car than Mate did.
Mate was charge ~10-15% in 40-60 minutes when connected to car. P20Pro is charging ~2-3% at the same time.
I don't uderstand why. Both of phones have the same battery, the same CPU. That difference with charging exists only in car.
Thanks in advance for any solutions
pratik_193 said:
you will have to buy a supercharger from ebay.in. I just bought one for INR 1800
Click to expand...
Click to collapse
Please give the link to your purchase. And is it working as expected?
halleyrokz said:
Please give the link to your purchase. And is it working as expected?
Click to expand...
Click to collapse
https://www.ebay.in/itm/Huawei-Supe...e=STRK:MEBIDX:IT&_trksid=p2057872.m2749.l2649
Working fine since last 1 month..
pratik_193 said:
you will have to buy a supercharger from ebay.in. I just bought one for INR 1800
Click to expand...
Click to collapse
pratik_193 said:
https://www.ebay.in/itm/Huawei-Supe...e=STRK:MEBIDX:IT&_trksid=p2057872.m2749.l2649
Working fine since last 1 month..
Click to expand...
Click to collapse
Thank you...I presume while charging with it, the lock screen shows supercharger
halleyrokz said:
Thank you...I presume while charging with it, the lock screen shows supercharger
Click to expand...
Click to collapse
yes, shows supercharging on lock screen
To know 2 ways how much Ampere it charges, then download app called Ampere it will tell you how much Ampere each charger gives. With SuperCharger it should say around 4500-4800Ampere.
The second way to know it's using supercharge is that it has 2 lightning icons connected in battery icon and that it says supercharge.
I've noticed that even if you have a supercharger, you need to have a proprietary cable AS WELL to get supercharge.
Otherwise you get bog standard charging, which takes about 2 hours to charge (I think. Never charge my phone from 0)