Hi did any of you recently installed a custom recovery in a Moto G 2014 (xt1068, just unlocked, fresh factory reset, android 6.x)?
I'm trying to flash TWRP but it seems there's no partition named recovery to flash to.
I found little online, mostly people asking the same question and getting stupid answers... any idea?
Code:
# fastboot flash recovery recovery.img
(bootloader) has-slot:recovery: not found
target reported max download size of 536870912 bytes
sending 'recovery' (7 KB)...
OKAY [ 0.026s]
writing 'recovery'...
(bootloader) Invalid boot image
FAILED (remote failure)
finished. total time: 0.057s
I cannot even boot recovery on the fly with fastboot boot, it seems to work without errors but boots into the default android image.
EDIT:
The recovery image was corrupted, stupid me to not check its hash.... as the error message says it was just 7KB when it should have been a couple of MBs. The slot not found message is completely misleading.
I blame TWRP website, it makes you click several times on a link with a complete filename in it. I though one of those was the proper link and copied to wget. It downloaded the html page but I didn't notice.
Please TWRP maintainers if you read this consider reducing the number of hops to get to the real download, or just rename the link to something not misleading like "Click to go to the download page"
I recently installed TWRP recovery on my phone and unlocked the bootloader. However, I did not read that after this you can not install OTA updates, and I would like to be able to download them. So my question is how to effectively upload Stock Recovery on my phone? I downloaded my ROM and extracted the file RECOVERY.IMG from it and tried to upload it through ADB, but during the flash it appears to me in CMD:
"C:\minimal>fastboot flash recovery recovery.img
target reported max download size of 471859200 bytes
sending 'recovery' (35396 KB)...
OKAY [ 0.774s]
writing 'recovery'...
FAILED (remote: Command not allowed)
finished. total time: 0.784s"
What can I do in this case? Will anyone help me? Thank you.
the recovery partition on oreo isn't called recovery! it's called ramdisk, BTW can you upload the recovery image please?
Hey,
I think I might have bricked my phone.
Whenever I want to instal my recovery fiile it keeps saying "Cannot mount /cust"& /vendor
I've tried almost anything I can think of. I've tried the dload method but it keeps giving me error about the firmware not being supported or so.
I've manually tried to flash the cust.img through adb :
PS C:\adb> fastboot flash recovery cust.img
target reported max download size of 471859200 bytes
sending 'recovery' (361698 KB)...
OKAY [ 12.789s]
writing 'recovery'...
FAILED (remote: partition error)
finished. total time: 12.815s
PS C:\adb>
I wiped everything and tried to instal a stock B381 firmware but no luck also.
Any help would be appreciated
Hola compañero, prueba esto.
https://forum.xda-developers.com/showpost.php?p=66570915&postcount=11
But where it says
mmcblk0p23
Change it to
mmcblk0p44
Besides. instead of using the sdcard partition, which is the internal memory, I advise you to do it from the external memory. So don't forget to trade one for the other on the command line.
My advice is that if you have TWRP installed you do it from the terminal of that recovery.
With VENDOR, the command line I used is the following
dd if=/external_sd/VENDOR.img of=/Vendor
I used the CUST and the VENDOR extracted from the B103 version, so if you don't have it I advise you to download it, and extract what you need from that version with Huawei Extractor, if everything works out well, I recommend that the first thing you do is, reinstall the official recoveries, and with the method of the 3 buttons, install that same version (Vie-l09B103C432), that in case your P9 is an L09 and you are in Rom international, if it is another version, you have to look for the files suitable for your terminal.
Good luck.
Translated with www.DeepL.com/Translator
Hello
my mobile is blocked on the HUAWEI logo
when I press VOL- and POWER I go to FASTBOOT & RESCUE MODE (mobile connected to the PC)
PHONE Locked
FRP Lock
my questions:
* if the bootloader is blocked, it is not possible to flash the BOOT, RECOVERY, SYSTEM, etc. with ADB?
* If the mobile is bricked, it is not possible then to unlock the bootloader?
* why, when I introduce an SD card with a LOAD folder, containing UPDATE.APP the mobile does not perform the firmware installation?
I try I do not know how many firmware and I have not yet managed to unblock.
if someone has had the same problem, I want their help.
otherwise, tell me clearly that it is not possible to unlock and the mobile will end up in the trash ...
it will save me from tearing off the rest of hair on my head
iblda said:
Hello
my mobile is blocked on the HUAWEI logo
when I press VOL- and POWER I go to FASTBOOT & RESCUE MODE (mobile connected to the PC)
PHONE Locked
FRP Lock
my questions:
* if the bootloader is blocked, it is not possible to flash the BOOT, RECOVERY, SYSTEM, etc. with ADB?
* If the mobile is bricked, it is not possible then to unlock the bootloader?
* why, when I introduce an SD card with a LOAD folder, containing UPDATE.APP the mobile does not perform the firmware installation?
I try I do not know how many firmware and I have not yet managed to unblock.
if someone has had the same problem, I want their help.
otherwise, tell me clearly that it is not possible to unlock and the mobile will end up in the trash ...
it will save me from tearing off the rest of hair on my head
Click to expand...
Click to collapse
You are totally bricked.. Must have luck to unbrick this but try with DC-Phoenix unlocker, but It"s paid.. I was have same problem and this one help to me
cxyqqz said:
You are totally bricked.. Must have luck to unbrick this but try with DC-Phoenix unlocker, but It"s paid.. I was have same problem and this one help to me
Click to expand...
Click to collapse
I paid 15 € !!
I have this message on DC phoenix
Writing rescue_recovery partition with file recovery
rescue_recovery partition UPDATE ...OK
Looking for device in upgrade mode...
and the mobile is on fastboot & rescue mode ..
if i try to pass the mobile with flight + & power, it shows me the same screen as the departure:
Error!
Func NO: 10 (boot image)
Error NO: 1 (security verify failed)
this morning another test with DC phoenix
error 10
error 1
iblda said:
this morning another test with DC phoenix
error 10
error 1
Click to expand...
Click to collapse
try : https://www.youtube.com/watch?v=8E43DkUQGMM
cxyqqz said:
try : https://www.youtube.com/watch?v=8E43DkUQGMM
Click to expand...
Click to collapse
dc unlocker does not detect my mobile
only DC phoenix detects it
using the tab "update oeminfo" on DC Phoenix 0.0.0.63, I manage to put the mobile in "PHONE UNLOCKED"
from there I take the opportunity to try to flash BOOT, RECOVERY, SYSTEM with ADB commands.
everything goes smoothly and without error but by restarting the mobile always the same screen with the error in red.
message ADB:
Microsoft Windows [version 10.0.17134.407]
(c) 2018 Microsoft Corporation. Tous droits réservés.
C:\Users\José>cd c:/adb
c:\adb>fastboot erase cache
erasing 'cache'...
OKAY [ 0.020s]
finished. total time: 0.021s
c:\adb> fastboot flash boot boot.img
target reported max download size of 471859200 bytes
sending 'boot' (22688 KB)...
OKAY [ 0.539s]
writing 'boot'...
OKAY [ 0.683s]
finished. total time: 1.227s
c:\adb>astboot flash recovery recovery.img
'astboot' n’est pas reconnu en tant que commande interne
ou externe, un programme exécutable ou un fichier de commandes.
c:\adb> fastboot flash recovery recovery.img
target reported max download size of 471859200 bytes
sending 'recovery' (36166 KB)...
OKAY [ 0.894s]
writing 'recovery'...
OKAY [ 1.079s]
finished. total time: 1.981s
c:\adb>fastboot flash system system.img
target reported max download size of 471859200 bytes
sending sparse 'system' (460798 KB)...
OKAY [ 18.360s]
writing 'system'...
OKAY [ 8.003s]
sending sparse 'system' (442517 KB)...
OKAY [ 20.055s]
writing 'system'...
OKAY [ 7.675s]
sending sparse 'system' (459746 KB)...
OKAY [ 17.637s]
writing 'system'...
OKAY [ 7.992s]
sending sparse 'system' (444901 KB)...
OKAY [ 18.492s]
writing 'system'...
OKAY [ 7.729s]
sending sparse 'system' (438286 KB)...
OKAY [ 17.082s]
writing 'system'...
OKAY [ 7.612s]
sending sparse 'system' (150611 KB)...
OKAY [ 5.483s]
writing 'system'...
OKAY [ 2.622s]
finished. total time: 138.805s
c:\adb>
I do not know how I managed to unbrick with a rom NOVA LITE PRA-LX3
how to get back to p8lite ROM now and without the brick again?
EDIT:
I do not know how I managed to unbrick with a rom NOVA LITE PRA-LX3
how to get back to p8lite ROM now and without the brick again?
I took the risk and I flashed again with DC Phoenix with the ROM:
* Prague-L31_C432B100_Firmware_Portugal_Switzerland_France_Germany_Spain_Sweden_Austria_Hungary_Greece_Bulgaria_Macedonia_Nonspecific.APP
but the mobile is still NOVA LITE with imei 000000XXXX
the camera does not work, black screen, photo and selfie
iblda said:
I do not know how I managed to unbrick with a rom NOVA LITE PRA-LX3
how to get back to p8lite ROM now and without the brick again?
EDIT:
I do not know how I managed to unbrick with a rom NOVA LITE PRA-LX3
how to get back to p8lite ROM now and without the brick again?
I took the risk and I flashed again with DC Phoenix with the ROM:
* Prague-L31_C432B100_Firmware_Portugal_Switzerland_France_Germany_Spain_Sweden_Austria_Hungary_Greece_Bulgaria_Macedonia_Nonspecific.APP
but the mobile is still NOVA LITE with imei 000000XXXX
the camera does not work, black screen, photo and selfie
Click to expand...
Click to collapse
Boot into eRecovery (Volume up whilw connected to PC, or when it shows "bootloader unlocked" warning, hold volume up.) Update to lates firmware
also if you get opportunity to update via HiSuite or from phone settings update it. Try as many times as you can to succed. It will aventually flash latest and greatest firmware.
Another method is to use update.app for servicing phones. Downlaod it from here, http://androidhost.ru/K5, place the update.app on external_sdcard inside of a "dload" folder. IN the phone app type *#*#2846579#*#* and select sdcard upgrade. It should work
Wish you luck
aciupapa said:
Another method is to use update.app for servicing phones. Downlaod it from here, http://androidhost.ru/K5, place the update.app on external_sdcard inside of a "dload" folder. IN the phone app type *#*#2846579#*#* and select sdcard upgrade. It should work
Wish you luck
Click to expand...
Click to collapse
this method does not work
the mobile does not exceed 5% and then displays SOFTWARE INSTALL FAILED
Try using HurUpdater. Flash twrp, the download all these files.
1. http://update.hicloud.com:8180/TDS/data/files/p3/s15/G1727/g1647/v146015/f1/full/update.zip dont change name
2.For dualsim
http://update.hicloud.com:8180/TDS/...l/PRA-L31_hw_eu/update_full_PRA-L31_hw_eu.zip (change filename to update_all_hw.zip)
For single sim http://update.hicloud.com:8180/TDS/...l/PRA-L11_hw_eu/update_full_PRA-L11_hw_eu.zip (change filename to update_all_hw.zip)
3. http://update.hicloud.com:8180/TDS/...15/f1/full/public/update_data_full_public.zip (change filename to update_data_public.zip)
4. http://www.mediafire.com/file/ze5z78dq7zu3sxb/HuRUpdater_0.3.zip dont change filename
put all thesw files in one folder on an external sdcard
.
Flash or boot twrp on your phone, and do a "fornat data" commad. wipe all partitions except for the external sd. Flash the HuRupdater_0.3.zip file and confirm flashing by pressing
volume down. After flashing is complete Reboot your phone. ic everything works, it works. If it does not work, do a wipe data and cache in the stock recovery (hurupdater installs stock recovery from the update package automatically)
aciupapa said:
.
Flash or boot twrp on your phone, and do a "fornat data" commad. wipe all partitions except for the external sd.
Flash the HuRupdater_0.3.zip file and confirm flashing by pressing volume down.
After flashing is complete Reboot your phone. ic everything works, it works.
If it does not work, do a wipe data and cache in the stock recovery (hurupdater installs stock recovery from the update package automatically)
Click to expand...
Click to collapse
I flash how?
with what?
where is trwp?
How do I install it?
sorry, I'm starting to be lost ..
this is what I get with the twrp that I downloaded with ADB:
PS C:\Users\José\Documents\MOBILES\huawei\P8\zzzzzz> fastboot flash recovery TWRP-3.2.1-0.img
target reported max download size of 471859200 bytes
sending 'recovery' (8486 KB)...
OKAY [ 0.226s]
writing 'recovery'...
FAILED (remote: image verification error)
finished. total time: 0.256s
WITH MULTI-TOOL FOR HUAWEI:
target reported max download size of 471859200 bytes
sending 'recovery' (23942 KB)...
OKAY [ 0.637s]
writing 'recovery'...
FAILED (remote: image verification error)
finished. total time: 0.653s
my big problem is the installation of a recovery custom.
I can not install it.
the mobile is good in fastboot with bootloader unlocked
but there is no way to flash the recovery:
c: \ adb> fastboot flash recovery twrp-2.8.7.1-p8.img
target reported download size of 471859200 bytes
sending 'recovery' (25880 KB) ...
OKAY [0.676s]
writing 'recovery' ...
FAILED (remote: image verification error)
finished. total time: 0.707s
this is the message I have for all recovery.
EDIT:
and now I have no access unlocking the bootloader with DC phoenix.
Looking for a device in fastboot mode
Device found: 9DCDU17124012020
05/12/2018 23:00:16 Starting to write device in FASTBOOT mode...
Device found: 9DCDU17124012020
IMEI: 862551034926948
Build number: RA-LX1C432B211
Product model: PRA-LX1
Batery state: 4279mv
Not enough credits
he was talking about 72 hours, the time is over.
it's really stealing this dunking thing. the mobile never finally landed, when it was back again it was blocked again.
really **** these huawei as soon as it's bricked.
RIP
[emoji34][emoji35][emoji34][emoji35][emoji34][emoji35]
thanks anyway for your help, even if it did not work ..
Envoyé de mon MHA-L29 en utilisant Tapatalk
iblda said:
I flash how?
with what?
where is trwp?
How do I install it?
sorry, I'm starting to be lost ..
this is what I get with the twrp that I downloaded with ADB:
PS C:\Users\José\Documents\MOBILES\huawei\P8\zzzzzz> fastboot flash recovery TWRP-3.2.1-0.img
target reported max download size of 471859200 bytes
sending 'recovery' (8486 KB)...
OKAY [ 0.226s]
writing 'recovery'...
FAILED (remote: image verification error)
finished. total time: 0.256s
WITH MULTI-TOOL FOR HUAWEI:
target reported max download size of 471859200 bytes
sending 'recovery' (23942 KB)...
OKAY [ 0.637s]
writing 'recovery'...
FAILED (remote: image verification error)
finished. total time: 0.653s
Click to expand...
Click to collapse
------------------------
In your command line you write: fastboot flash recovery TWRP-3.2.1-0.img
just write: fastboot boot TWRP-3.2.1.0.img.. Then TWRP will open.
Now in TWRP you can install TWRP recovery, after reboot you will be able yo use it.
I hope this help you.
hi i unlocked bootloader and installed lineage 17 from stevesames tutorial
had some issues but got it done after a while
i cannot install gapps
not sure if im using the correct commands im kinda nooby lol but even lineage the apps i install say not rooted etc
trying to install twrc gets these errors
Code:
PS C:\Users\djlee\Downloads\platform-tools_r30.0.5-windows\platform-tools> fastboot devices
MBHEGU9PEY7DI74P fastboot
PS C:\Users\djlee\Downloads\platform-tools_r30.0.5-windows\platform-tools> fastboot flash recovery recovery.img
target reported max download size of 134217728 bytes
sending 'recovery' (15636 KB)...
OKAY [ 4.668s]
writing 'recovery'...
FAILED (remote: Only system partition can be flashed)
finished. total time: 4.680s
Trying to install gapps i get
Code:
PS C:\Users\djlee\Downloads\platform-tools_r30.0.5-windows\platform-tools> fastboot -u flash zip C:\Users\djlee\Downloads/open_gapps-arm-10.0-nano-20210213.zip
target reported max download size of 134217728 bytes
Invalid sparse file format at header magi
any help is greatly appreciated thanks
No-one has ever reported being able to, so you can forget about flashing GApps, Magisk, etc.
However, these versions of LineageOS 16 https://sourceforge.net/projects/andyyan-gsi/files/lineage-16.x/ are built with both root AND signature spoofing, so you can install MicroG (https://microg.org/) and Aurora Store (https://gitlab.com/AuroraOSS/AuroraStore) instead of Big Brother's ever-spying GApps.