As the title suggests, the wi-fi keeps reconnecting/disconnecting repeatedly even when I'm connected to my home wi-fi which is 100% stable and quick. What could be wrong? Sometimes it happens sometimes it doesn't but the majority of the time it happens. The following message shows up whenever it disconnects after I enabled wi-fi verbose logging but I have no idea what it means:
network selection permanently_disabled
network_selection_disabled_unstable_ap=1
Additional Info:
ROM: Venom v5 8.1
Kernel: Oxygen 6.0138
Root: Magisk 19.1
Phone Model: SM-G610Y
use the oxygen kernel legacy version. or reflash the rom without oxygen kernal. oxygen kernal is causing the issue.
cheers.
In the legacy version I couldn't even turn on wi-fi. Oh well, I guess I'll have to wait for an oxygen kernel update.
open the rom zip, extract the boot.img, and flash the boot.img (click "flash image" on twrp) tell me your results
root will disappear , so reflash magisk
Related
Hi,,I recently flashed MAGISK SU on my phone..After that WiFi is not at all working even if I keep my WiFi on ,,The WiFi button stays off even when i tried to switch it ON ??
I'm on OOS 4.1.3. running Nougat 7.1.1. ,Bootloader Unlocked and Custom Recovery Installed..I tried to root my phone and succeded in flashing Magisk 12.0 ,but after that it got into bootloop and i tried some known ways and get back the phone to Normal Level.
Since then I face severe lag in Phone,WiFi not working,Apps opening very slowly like that..
What may be the problem ?? Is it with Magisk or something Else..I run TWRP 3.0.4.1
Regards
VAETTA
hi vettayyan , the problem may occur when magisk conflicts with the system . backup your data , try formatting and flashing the rom . this time donot flash magisk . the phone should connect to wifi .
after trying and testing almost all roms on my device, i can conclude, there is no better rom than oxygen os (for my usage)
every time i install oxygen os, it encrypts my device, there's got to be a way to install it without losing my internal storage device data
pls help me do it :fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed::fingers-crossed:
You can do it by 3 different way:
1. Flash OOS and flash an OOS compatible 3rd party kernel available in XDA (blu_spark for example).
2. Flash OOS and flash patched OOS kernel for that same version available in XDA.
3. Flash through Redwolf TWRP which has inbuilt non-encryption patch.
Thanks
I have been using a OnePlus 3T for 2 years now.At first all custom ROMs could be easily flashed and used.But now,all oreo custom ROMs have one similar problem.After the reboot,wifi stops working.It works while initial setup,and then shows saved,but can't connect.Wifi works fine on oxygen os 5.0.5.
THANKS FOR THE HELP IN ADVANCE!!
:laugh:
Did you flash bluspark kernel before? That messed up my wifi. Regardless doing below should get you back up and running
-I would go into TWRP and Format data (this wipes EVERYTHING including internal storage so backup!). After formatting data, reboot TWRP and copy over the necessary files (firmware, gapps, rom, magisk, etc..)
-Then Flash the latest modem + firmware 5.0.5 https://androidfilehost.com/?fid=1322778262903990091
-Then Flash your ROM of choice (and gapps, magisk, etc...)
You should be fine then.
Have you tried pressing "forget" on your saved networks (and then reconnect to them)? If that doesn't work, you could also try resetting your WiFi options by going through system > Reset options > Reset Wifi, mobile & Bluetooth (I'm on Android Pie so the procedure might be different if you're on Oreo).
After some time I got a second Axon 10 and I spend some time figuring out what was possible with this phone in terms of root, custom ROM etc.
My results are as follows.
What is working:
Android 9 + Magisk and TWRP
Android 9 + TWRP + Custom ROMs (LineageOS 16 and patched GSI)
Android 10 + Magisk and TWRP
Android 10 + Magisk and MicroG flashed via Magisk (= stock ROM without Google Services)
Android 11 + Magisk
What is not working:
Android 11 + Magisk + TWRP (TWRP logo flashes randomly but TWRP does not load).
Android 11 + Magisk + MicroG (the nanolx patching script does not work with Android 11 as of yet)
Encryption in Custom ROMs
Method to flash files via EDL
Unzip / unrar my files into the backup\full folder of the EDL tool and choose restore + full in the tool.
Unlock Bootloader:
Before you try any of the files, you MUST unlock your bootloader!
BACKUP of your data as it will be lost!
Download the EDL tool from this Thread
If your phone is not on android 9, you must go back to Android 9 first. e.g. by using my Android 9 1.9 backup.
After you restored it, restart while holding the volume + key and do a factory reset / format data.
Boot into EDL again and unlock the bootloader.
Now you are on android 9 with unlocked bootloader.
From here you can follow the other guides in the form and install TWRP or lineageos. Or flash one of my files below.
Flashing EDL files:
Unzip / unrar my files into the backup\full folder of the EDL tool and choose restore + full in the tool.
I put all my files into this MEGA account: MEGA
Android 10 version 2.9 Magisk + TWRP
Android 11 version 3.5 stock
Android 11 version 3.5 Magisk
Android 10 version 2.10 stock
Android 10 version 2.10 Magisk (TWRP can be flashed with Magisk)
Install MicroG:
Only works on Android 9 and 10.
Before you install MicroG you must patch the stock ROM to allow for signature spoofing.
The patcher script I used is on https://downloads.nanolx.org/NanoDroid/Stable/ When I write these lines the up-to-date-version is NanoDroid-patcher-23.1.2.20210117.zip
Reboot.
Install MicroG from the Magisk repository.
After a restart there will be error messages that google apps keep crashing. With each warning, disable the apps one by one.
When you reboot again, no errors should appear and MicroG should report that it is fully working.
You can add the Bromite Framework and give F-droid system rights. Both are available from the Magisk repo.
Updates will likely install the Google apps again and uninstall Magisk...
Revive phone:
Not really related, but I bricked my phone several times.
If your phones does not boot anymore or hangs in a bootloop, try accessing the EDL mode.
The easy way:
Boot while holding volume -
The hard way:
Old Volume +, volume - and power until you end up in EDL. The screen will be black, so it helps if you have the Phone connected to Windows and can hear the system sound when the USB sees a connection.
In anyway you can then use the EDL tool to restore / flash an EDL image.
On custom ROM support:
Well there is LineageOS 16 by Unjustified Dev. https://forum.xda-developers.com/t/rom-unofficial-zte-axon-10-pro-9-lineageos-16-0.3992127/ It works well. But has a patch level that is outdated by now.
On top of it you can install the GSI ROMs created by Rafyvitto. The latest one is Resurrection Remix https://forum.xda-developers.com/t/...nofficial-resurrection-remix-q-8-6-7.4172527/
with a security patch level of mid 2021. Which is recent enough to use. The stock roms are not much better.
With both Custom ROMs, encryption is not working which poses a privacy/security risk when your phone is stolen. Do not forget that your phone does not only contain your photos and data but also your passwords to your accounts.
Added Android 10 2.10 files.
Its nice to see anything new for this phone. I wish I can use these roms but I have the American version.
Hi and thanks for your work and your files.
I'm stuck on "Loading the programmer: prog_ufs_firehose_sdm855.elf >>>", if I try to recover your edl files with EDL Tool, v 3.25.
I have to choose option 2: "Restore Full EDL from backup", right?
Is there a way to check if the bootlaoder is really unlocked?
Thanks in advance
OK, I was able to solve the problem with the "programmer" and try the backups. The next step was almost clear. The device is stuck in bootloop. I've already tried all the backups I could find on Mega. After the EDL Tool has done its work and the device has restarted, the mobile phone goes into the boot loop. And now? So the starting position was: Android 9 with an open bootloader. Maybe someone has an idea?
After I couldn't get the device out of the bootloop, I flashed the A2020G_PRO_V1.6_FULL_EDL via MiFlash and then did an OTA update to 1.8.
Then I tried unlocking the bootloader again, which unfortunately didn't work. The flash is carried out without errors, but the device then apparently does not start in the desired Fastboot mode.
Thanks for your guide. However am I missing something with the Android 11+Magisk installation? I restored all the correct files and everything flashed correctly, however upon reboot there is no Magisk installed anywhere. Did a factory reset after the flash and still not there. Tried installing Magisk via his github and tried patching the boot.img again and it says success but after rebooting it says Magisk is not installed.
brian117 said:
Thanks for your guide. However am I missing something with the Android 11+Magisk installation? I restored all the correct files and everything flashed correctly, however upon reboot there is no Magisk installed anywhere. Did a factory reset after the flash and still not there. Tried installing Magisk via his github and tried patching the boot.img again and it says success but after rebooting it says Magisk is not installed.
Click to expand...
Click to collapse
Maybe you need to switch the slot in TWRP. It sounds as if you install it to the other slot (like A) an then boot B. Or vice versa.
Just updated to 14, rooted device and my Bluetooth won't stay on. Anybody else have that problem? Thanks
hllywd said:
Just updated to 14, rooted device and my Bluetooth won't stay on. Anybody else have that problem? Thanks
Click to expand...
Click to collapse
If you rooted and used the old patched image you will have issues.
If you lost root when your updated.
You would fastboot boot boot.img(magisk patchedimg) then when phone boots go to magisk manager and do direct install(ignore magisk not installed or needs to reboot etc message) after direct install reboot. This will patch the new rims boot img instead of using say .12 s boot img that would give you issues with Bluetooth or wifi etc
So to fix your issue I would download the software update apk from a13 dp1. Download a14 rom from oxygen updater and do local update with that app.(don't reboot in software updater. Then open magisk and select patch to inactive slot and hit reboot in magisk after