Hi
i try to build from vanila rootbox source,
and when i entered the following line:
Code:
~$ repo init -u git://github.com/Root-Box/platform_manifest.git -b jb-mr1
terminal:
Code:
No command 'repo' found, did you mean:
Command 'rep' from package 'rep' (universe)
Command 'repl' from package 'nmh' (universe)
Command 'repl' from package 'mailutils-mh' (universe)
repo: command not found
repo
OK, problem sloved...
but i get this eror:
Code:
curl: (22) The requested URL returned error: 404
If you need to flash ROM even using fastboot for Smartphone or Tablet in which they use Android OS! Then Ubuntu OS is needed!
This is a guide I made for ubuntu users and included a guide for windows users to setup Android SDK which contains ADB.
Android Debug Bridge (ADB) provides a terminal interface on your PC to interact with your device's file system. This can be useful for many things like installing & uninstalling apps, logcat, backup & restore, and hacking your device just to name a few.
ubuntu 12.04 & 12.10 Guide
1. Go here and download android-sdk (not the adt-bundle)....
https://hotfile.com/dl/241406263/5e6a306/android-sdk_r22.0.5-linux.tgz.html
2. Place the downloaded file in your home folder and then extract it and you should get a folder named android-sdk-linux (do not rename it).
3. If you’re on a 64bit machine run these commands in terminal to make sdk compatible with 64bit (if you’re on 32bit machine then skip this step)....
sudo apt-get update
sudo apt-get install ia32-libs-multiarch
4. Run this command in terminal to install jdk if you don’t have it already....
sudo apt-get install openjdk-6-jdk
5. Navigate to the home folder where you extracted android-sdk-linux and open the folder then open the folder named tools
6. Inside the tools folder there will be a file named android... double click it and select run then android sdk manager will open.
7. In the center pane deselect everything... Now only select the following....
Android SDK Tools
Android SDK Platform-tools
Android Support Library
8. Once selections have been made click on install packages and wait till finished.
9. Upon completion of step 8 in terminal run this command....
sudo gedit ~/.bashrc
When the file opens, go to the very bottom and copy/paste the following 3 lines (make sure they’re each on separate lines)....
# Android tools
export PATH=${PATH}:~/android-sdk-linux/tools
export PATH=${PATH}:~/android-sdk-linux/platform-tools
10. Now reboot your computer.
11. Set your phone to usb debugging then plug it to your pc after pc is done booting
12. Open a terminal on your pc and enter....
adb devices
If all went well, you should see your phone’s serial number and you’ll be ready to go.
~~~~~Important~~~~~
You can use steps 5 & 6 to open Android SDK Manager & update your ADB/SDK installation. Only select your installed packages then update.
Also if you only need the fastboot/adbtools:
sudo add-apt-repository -y ppa: phablet-team/tools
Note: delete the space after"-y ppa:" -xda creates smileys like ppa
sudo apt-get update
sudo apt-get install -y phablet-tools
Sent from my Nexus 4 using xda app-developers app
Thank...
gazhead said:
Also if you only need the fastboot/adbtools:
sudo add-apt-repository -y ppa: phablet-team/tools
Note: delete the space after"-y ppa:" -xda creates smileys like ppa
sudo apt-get update
sudo apt-get install -y phablet-tools
Sent from my Nexus 4 using xda app-developers app
Click to expand...
Click to collapse
Thanks man! It's also good way!
Followed this guide (thank you for posting) but couldn't connect. Scratched around and found I needed to create a new file in /etc/udev/rules.d with:
Code:
SUBSYSTEM=="usb", ATTR{idVendor}=="<4-char_verndorID>", ATTR{idProduct}=="4-char_productID", MODE="0666", OWNER="username"
Followed by:
Code:
sudo restart udev
Then plugged device in and it worked!
qtoon said:
Followed this guide (thank you for posting) but couldn't connect. Scratched around and found I needed to create a new file in /etc/udev/rules.d with:
Code:
SUBSYSTEM=="usb", ATTR{idVendor}=="<4-char_verndorID>", ATTR{idProduct}=="4-char_productID", MODE="0666", OWNER="username"
Followed by:
Code:
sudo restart udev
Then plugged device in and it worked!
Click to expand...
Click to collapse
What did you name the new file you created? Or did you add this string to another existing file from the rules.d directory? I'm not sure what I've done wrong, but I get
Code:
[email protected]:~$ adb devices
No command 'adb' found, did you mean:
Command 'cdb' from package 'tinycdb' (main)
Command 'gdb' from package 'gdb' (main)
Command 'dab' from package 'bsdgames' (universe)
Command 'zdb' from package 'zfs-fuse' (universe)
Command 'kdb' from package 'elektra-bin' (universe)
Command 'tdb' from package 'tads2-dev' (multiverse)
Command 'pdb' from package 'python' (main)
Command 'jdb' from package 'openjdk-6-jdk' (main)
Command 'jdb' from package 'openjdk-7-jdk' (universe)
Command 'ab' from package 'apache2-utils' (main)
Command 'ad' from package 'netatalk' (universe)
adb: command not found
[email protected]:~$
This is after following each step, adding the three lines to the end of .bashrc and rebooting.
atmu5fear said:
What did you name the new file you created? Or did you add this string to another existing file from the rules.d directory? I'm not sure what I've done wrong, but I get
Code:
[email protected]:~$ adb devices
No command 'adb' found, did you mean:
Command 'cdb' from package 'tinycdb' (main)
Command 'gdb' from package 'gdb' (main)
Command 'dab' from package 'bsdgames' (universe)
Command 'zdb' from package 'zfs-fuse' (universe)
Command 'kdb' from package 'elektra-bin' (universe)
Command 'tdb' from package 'tads2-dev' (multiverse)
Command 'pdb' from package 'python' (main)
Command 'jdb' from package 'openjdk-6-jdk' (main)
Command 'jdb' from package 'openjdk-7-jdk' (universe)
Command 'ab' from package 'apache2-utils' (main)
Command 'ad' from package 'netatalk' (universe)
adb: command not found
[email protected]:~$
This is after following each step, adding the three lines to the end of .bashrc and rebooting.
Click to expand...
Click to collapse
@atmu5fear, inferring that you're new to Linux (a common background for all), some notes:
Unlike wlth Win-d'oh-s, there is a worldwide development community that's always working toward improvement of every aspect of the system, including echoed messages and documentation. You may have to shake off the tendency to ignore Windudz messages, which are frequently unhelpful. Linux command echoes are much more on-target. Also, look for files such as README in rules.d and read it!
Now before creating a new config file (which may not be necessary on your system), see the top feedback line: "No command 'adb' found." First, see that the adb binary is present and that it has exec permission. (Since it's a small file and functions alone, I prefer to copy it to the folder I'm working from.)
If it then runs but won't connect, read on...
Directory (or "folder") names with a trailing '.d' are special: They configure, control, or provide executables for daemons (programs which run continuously, providing a service).
Within service-config.d folders, if the service steps through the files sequentially (as in this case), then it does so based on each filename. (True except for the special case of rc.d, iIRC, in which order is set by the special program rcorder).
So in this case, for example, since the existing files are named 70-whatever, your newly-created file could be 80-atmu5fears-phone to load after the others.
Should connect.
qtoon said:
@atmu5fear, inferring that you're new to Linux (a common background for all), some notes:
Unlike wlth Win-d'oh-s, there is a worldwide development community that's always working toward improvement of every aspect of the system, including echoed messages and documentation. You may have to shake off the tendency to ignore Windudz messages, which are frequently unhelpful. Linux command echoes are much more on-target. Also, look for files such as README in rules.d and read it!
Now before creating a new config file (which may not be necessary on your system), see the top feedback line: "No command 'adb' found." First, see that the adb binary is present and that it has exec permission. (Since it's a small file and functions alone, I prefer to copy it to the folder I'm working from.)
If it then runs but won't connect, read on...
Directory (or "folder") names with a trailing '.d' are special: They configure, control, or provide executables for daemons (programs which run continuously, providing a service).
Within service-config.d folders, if the service steps through the files sequentially (as in this case), then it does so based on each filename. (True except for the special case of rc.d, iIRC, in which order is set by the special program rcorder).
So in this case, for example, since the existing files are named 70-whatever, your newly-created file could be 80-atmu5fears-phone to load after the others.
Should connect.
Click to expand...
Click to collapse
Thanks @qtoon for the reply. I'm not really new to Ubuntu, albeit, it's been a while. First started using it just prior to the realease of Hardy Heron 8.04 LTS. That being said I am certainly no expert, but am somewhat familiar and comfortable with the command line. I did read the README file before posting, but since I'm not all that familiar with configuration files and the like, I figured maybe I should ask.
As per your suggestion i moved the ADB binary to my home folder, not necessarily my working folder, but to test to see if the adb command would be recognized in terminal.
Code:
mv ~/ADB/android-sdk-linux/platform-tools/adb ~/
Still got same result so I moved it back, then went on to make a new file and add the suggested string
Code:
sudo > /etc/udev/rules.d/80-atmu5fear-adb
sudo gedit /etc/udev/rules.d/80-atmu5fear-adb
After saving and restarting udev I still get the same "adb command not found" error.
I then changed the string to read OWNER"atmu5fear" instead of "username", still nothing
Any more suggestions?
Thanks
atmu5fear
Sorted it out
instead of:
adb devices
i needed to input:
./adb devices
It's listed, and in order to use the adb shell:
./adb shell
once in the shell all adb commands work
I get this error...
[email protected]:~$ sudo > /etc/udev/rules.d/80-sjy-phone
bash: /etc/udev/rules.d/80-sjy-phone: Permission denied
ok....... didn't need to add a file, changed phone usb mode to media device and all is ok.
thanks
atmu5fear said:
Sorted it out
instead of:
adb devices
i needed to input:
./adb devices
It's listed, and in order to use the adb shell:
./adb shell
once in the shell all adb commands work
Click to expand...
Click to collapse
Didn't think to mention that, apologies.
Quick 'why' on the ./ here.
Glad you got it running.
Just tried on 14.4 and worked like a charm.
Note: No need to reboot the computer, just reload the bash config with
Code:
source ~/.bashrc
Thanks
A good step by step guide
i will try it and see if it works
Thanks again
Hello, can someone help me ? - I m having problems connecting my device with adb (I ve connected several other devices before with no problems).
I ve got an Allwinner A20 tv box, it worked fine for a few months then one day, after being on (but idle) for a few hours, I noticed the screen was blank but the light on the front was blue (indicating it was on, red is standby). It would not respond to the remote control or to anything, so I unplugged it and since then it will not boot and the screen is blank, the red light will light up but that is it. I ve eliminated the remote controller not working, but I cant boot the device.
So I ve tried connecting via ADB (with Ubuntu) but I cant get the device to show up after typing "adb devices".
Using this guide:
http://androidonlinux.wordpress.com/2013/05/12/setting-up-adb-on-linux/
I can get the vendor id and device id and I ve added it and the manufacturer to udev/modeswitch devices, but when I type "sudo usb_modeswitch -v 0x1f3a -p 0xefe8 -S -R -W"
I get the following error:
~/Android/sdk/platform-tools$ sudo usb_modeswitch -v 0x1f3a -p 0xefe8 -S -R -W
Take all parameters from the command line
* usb_modeswitch: handle USB devices with multiple modes
* Version 2.1.1 (C) Josua Dietze 2014
* Based on libusb1/libusbx
! PLEASE REPORT NEW CONFIGURATIONS !
DefaultVendor= 0x1f3a
DefaultProduct= 0xefe8
SierraMode=1
NeedResponse=0
Look for default devices ...
found USB ID 048d:1336
found USB ID 1d6b:0002
found USB ID 19a8:2036
found USB ID 1f3a:efe8
vendor ID matched
product ID matched
found USB ID 1d6b:0001
found USB ID 062a:0102
found USB ID 1d6b:0001
Found devices in default mode (1)
Access device 004 on bus 003
Current configuration number is 1
Use interface number 0
USB description data (for identification)
-------------------------
Manufacturer: not provided
Product: not provided
Serial No.: not provided
-------------------------
Send Sierra control message
Error: Sierra control message failed (error -7). Abort
I ve searched Google for the error code but I cannot find anything.
The device was rooted and USB debugging was on.
Any help would really be appreciated.
Thanks
I'm new to this please kindly help
It says command not found every time i try to do that
I'm using HTC one M7 International 4.4.2
Last login: Sun Mar 30 15:42:50 on console
Pipers-MacBook-Pro:~ PiperNatathaphol$ cd Desktop/Android
Pipers-MacBook-Pro:Android PiperNatathaphol$ ./ADB-Install-Mac.sh
This will install ADB and Fastboot on your computer.
Root Permissions required. Please type your password.
WARNING: Improper use of the sudo command could lead to data loss
or the deletion of important system files. Please double-check your
typing when using sudo. Type "man sudo" for more information.
To proceed, enter your password, or type Ctrl-C to abort.
Password:
Changed directory to /Users/PiperNatathaphol/Desktop/Android
Moving ADB
mv: rename Mac/adb_Mac to /usr/bin/adb: No such file or directory
ADB Moved to /usr/bin/adb
moving Fastboot
mv: rename Mac/fastboot_Mac to /usr/bin/fastboot: No such file or directory
Fastboot moved to /usr/bin/fastboot
You may now run Android Debug Bridge and Fastboot commands
Have a nice day.
Pipers-MacBook-Pro:Android PiperNatathaphol$ fastboot flash recovery openrecovery-twrp-2.6.3.3-m7.img.
-bash: fastboot: command not found
Im trying to make an old tablet that I have custom android on a dedicated host and portal. It is a fire7 gen 9 with android 7.1.2 cleaned and sideloaded with fire toolbox 1. It will always be left on and attached to a wall. This is what I got before issues arose. Setup termux, upgraded, updated, installed openssh. Below is my output. Any help would be greatly appreciated.
$ sshd $ ssh -p 8022 [email protected] [email protected]'s password: Welcome to Termux! Community forum: https://termux.com/community Gitter chat: https://gitter.im/termux/termux IRC channel: #termux on freenode Working with packages: * Search packages: pkg search <query> * Install a package: pkg install <package> * Upgrade packages: pkg upgrade Subscribing to additional repositories: * Root: pkg install root-repo * Unstable: pkg install unstable-repo * X11: pkg install x11-repo Report issues at https://termux.com/issues The Google Play version of the Termux app no longer receives updates. For more information, visit: https://wiki.termux.com/wiki/Termux_Google_Play ~ $ pkg install python-dev libffi-dev openssl-dev coreutils clang python coreutils nano mosquitto nodejs openssh termux-api make Checking availability of current mirror: ok Hit:2 https://grimler.se/game-packages-24 games InRelease Hit:3 https://grimler.se/science-packages-24 science InRelease Get:1 https://k51qzi5uqu5dg9vawh923wejqffxiu9bhqlze5f508msk0h7ylpac27fdgaskx.ipns.dweb.link stable InRelease [14.0 kB] Fetched 14.0 kB in 3s (4254 B/s) Reading package lists... Done Building dependency tree... Done Reading state information... Done All packages are up to date. Reading package lists... Done Building dependency tree... Done Reading state information... Done Package libffi-dev is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source However the following packages replace it: libffi Package openssl-dev is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source However the following packages replace it: openssl Package python-dev is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source However the following packages replace it: python E: Package 'python-dev' has no installation candidate E: Package 'libffi-dev' has no installation candidate E: Package 'openssl-dev' has no installation candidate
Click to expand...
Click to collapse
Please point out where I messed up.
Here is what output from SSH -j
Command dx in package dx Command ecj in package ecj Command ed in package ed Command eja in package eja Command ef in package electric-fence Command et in package et Command fd in package fd Command dl in package gatling Command gh in package gh Command gs in package ghostscript Command go in package golang Command gm in package graphicsmagick Command gc in package graphviz Command i3 in package i3 from the x11-repo repository Command iw in package iw from the root-repo repository Command jo in package jo Command jq in package jq Command k in package kona Command lf in package lf Command lr in package lr Command m4 in package m4 Command mc in package mc Command mg in package mg Command ts in package moreutils Command lz in package mtools Command mu in package mu Command mr in package myrepos Command ne in package ne Command nc in package netcat Command nc in package netcat-openbsd Command nu in package nushell Command o in package o Command o in package o-editor Command 7z in package p7zip Command ps in package procps Command pv in package pv Command qjs in package quickjs Command r2 in package radare2 Command ci in package rcs Command rc in package rcshell Command rg in package ripgrep Command ri in package ruby-ri Command sv in package runit Command sc in package sc Command ag in package silversearcher-ag Command sl in package sl Command st in package st from the x11-repo repository Command sr in package surfraw from the unstable-repo repository Command ts in package task-spooler Command am in package termux-am Command df in package termux-tools Command ht in package texlive-bin Command sn in package tin-summer Command tf in package tinyfugue Command ul in package util-linux Command cu in package uucp Command ex in package vim-gtk from the x11-repo repository Command vt in package virustotal-cli Command v in package vlang from the unstable-repo repository Command wg in package wireguard-tools Command xz in package xz-utils Command z3 in package z3 $
Click to expand...
Click to collapse
نسيت البريد الإلكترونيى 01157652618