Related
Hi, I want to install Magisk but i got this error.
- Mounting /system, /vendor
! Cannot mount /vendor
- Unmounting partitions
Updater process ended with ERROR: 1
Error installing zip file '/sdcard/Magisk-v16.0.zip'
Click to expand...
Click to collapse
It's clean install with wiped system, cache, data before.
Phone: Redmi Note 4 (mido)
Recovery: Red Wolf Recovery Project V3.2.1-027
Harry0309 said:
Hi, I want to install Magisk but i got this error.
It's clean install with wiped system, cache, data before.
Phone: Redmi Note 4 (mido)
Recovery: Red Wolf Recovery Project V3.2.1-027
Click to expand...
Click to collapse
try with treble supported normal twrp recovery and clean install your rom
I can't give link because I haven't got 10 posts
https://forum.xda-developers.com/re...other-development/rom-lineageos-15-0-t3690465
Check out the downloads section of the xda link I gave you. I hope there will be a solution there
Hope you solve this problem.
HuseyinS said:
try with treble supported normal twrp recovery and clean install your rom
I can't give link because I haven't got 10 posts
https://forum.xda-developers.com/re...other-development/rom-lineageos-15-0-t3690465
Check out the downloads section of the xda link I gave you. I hope there will be a solution there
Hope you solve this problem.
Click to expand...
Click to collapse
Thanks! Helped change recovery.
This is weird because I was using this recovery earlier with magisk and everything was 100% fine.
Hi, I want to
Can someone will tell how to do it step by step procedures I am also facing sam
will tell how to do it step by step procedures I am also facing same issue device mido
@Sajag I flashed recovery with twrp with treble support.
Harry0309 said:
@Sajag I flashed recovery with twrp with treble support.
Click to expand...
Click to collapse
can you send me the link of twrp for treble builds??
Anil Jeenapati said:
can you send me the link of twrp for treble builds??
Click to expand...
Click to collapse
https://forum.xda-developers.com/on...overy-twrp-3-2-1-0-oreo-oxygenos-5-0-t3725723
EDIT: Sorry, didn't realize you were on mido, and not cheeseburger. Ignore the above.
Anil Jeenapati said:
can you send me the link of twrp for treble builds??
Click to expand...
Click to collapse
For mido: https://drive.google.com/open?id=1zdgzjXssY3CFhdxmLeSR0AlqZQQyZ-7F
I flasheded to the latest version of RR-O-v6.0.0-20180502-mido-Official using clean flash. After flashing I realised that I was not able to flash any zip. "Cannot mount/vendor" error was being shown.now I am not able to root (magisk). Could you please help me in this??????????????
Anil Jeenapati said:
I flasheded to the latest version of RR-O-v6.0.0-20180502-mido-Official using clean flash. After flashing I realised that I was not able to flash any zip. "Cannot mount/vendor" error was being shown.now I am not able to root (magisk). Could you please help me in this??????????????
Click to expand...
Click to collapse
Try a different rom/ or different twrp
Try other ROMs
Anil Jeenapati said:
I flasheded to the latest version of RR-O-v6.0.0-20180502-mido-Official using clean flash. After flashing I realised that I was not able to flash any zip. "Cannot mount/vendor" error was being shown.now I am not able to root (magisk). Could you please help me in this??????????????
Click to expand...
Click to collapse
Hey. I was also facing the same issue . My opinion switch to another ROM i switched to Pixel experience.
Sajag said:
Hey. I was also facing the same issue . My opinion switch to another ROM i switched to Pixel experience.
Click to expand...
Click to collapse
are you getting OTA Updates now..??
I flashed Candy Os but same problem while updating
Anil Jeenapati said:
are you getting OTA Updates now..??
I flashed Candy Os but same problem while updating
Click to expand...
Click to collapse
I am not sure . I flashed the latest version till now there are no new update . I think candy Os is a treble ROM try non treble rom
Using the treble supported TWRP fixed the vendor mount problem but I get into a bootloop when I try to install Magisk (latest version). I'm using the Havoc ROM (Android 8.1.0 - Treble Supported).
Edit: Got Magisk running by using a modified version for Treble.
Direct Link to the custom build of Magisk: Here
Source of the Link: LineageOS 15.1 by abhishek987
Flash this recovery, its for treble:
https://forum.xda-developers.com/re...covery-twrp-exclusive-3-2-1-5-treble-t3775081.
And flash Magisk 16.4 beta or higher
Same problem...
madbat99 said:
Try a different rom/ or different twrp
Click to expand...
Click to collapse
I also suffering that issue
Solution?
Anil Jeenapati said:
I flasheded to the latest version of RR-O-v6.0.0-20180502-mido-Official using clean flash. After flashing I realised that I was not able to flash any zip. "Cannot mount/vendor" error was being shown.now I am not able to root (magisk). Could you please help me in this??????????????
Click to expand...
Click to collapse
Hello I also installed the same ROM plus the Recovery of Red Wolf, remember that since its a treble you cannot mount vendor, but actually its easier than anything, why? cause the RR its based on Lineage OS and this last one is based on Cyanogen Mod, at the end what im trying to say its that the root services are already included in the ROM you only need to "unlock it" so i have the link for that, you only need to install this addon in .zip format (all the links and products are not mine, so please give thanks to the amazing developers). This is the official link and it also comes with an instructive step by step, I did the install trough sideload and now is working!
Example of command with adb sideload: C:\Users\kaks\Downloads\adb\adb sideload "C:\Users\kaks\Downloads\adb\addonsu-15.1-arm64-signed.zip"
www . cyanogenmods.org / root-lineageos-15-1-android-oreo-rom /
Hope this work for you as it did for me
Kakashi171 said:
..the root services are already included in the ROM you only need to "unlock it" so i have the link for that, you only need to install this addon in .zip format (all the links and products are not mine, so please give thanks to the amazing developers). This is the official link and it also comes with an instructive step by step, I did the install trough sideload and now is working!
Click to expand...
Click to collapse
OK, but can I then hide the "rooting" afterwards with Magisk?
HuseyinS said:
try with treble supported normal twrp recovery and clean install your rom
I can't give link because I haven't got 10 posts
https://forum.xda-developers.com/re...other-development/rom-lineageos-15-0-t3690465
Check out the downloads section of the xda link I gave you. I hope there will be a solution there
Hope you solve this problem.
Click to expand...
Click to collapse
THANK YOU SO MUCH THAT HELPED!!
I JUST CHANGED RECOVERY NOTHING ELSE!
HELP I have researched everywhere on the internet and I'm not sure what to do. I have a REDMI 4A wit AEX ROM OREO8.1 installed, TWRP 3.2.2.0 Official (for Redmi 4A on the twrp website) and tried to flash Magisk v.16. Error 1 mount vendor shows up in twrp. Many YouTubers says I should flash boot.img. I've already flashed the boot.img of the given AEX ROM OREO 8.1, but the same error occurs. I tried to search for answers, and what I found was that apprently aosp oreo ROMs usually are Treble ROMs. Downloaded Termux app and checked if ROM was treble = false = NOT Treble! Then others say I have to flash a modded vendor version of twrp. (Link: (add Https here)/androidfilehost.com/?fid=674106145207489212) Haven't tried it out just wanted to make sure if I should or not, bacuse the last time I tried to flash a different twrp, I had to flash the original one back using ADB...
Btw I had given up at some point and I flashed SuperSU successfully. Why Can I flash SuperSU but not Magisk?? I fully unrooted SuperSU and am ready to try flashing Magisk again. If anyone has any idea how to fix this, pleeeeeease tell me I need Snapchat to work while having root (yes I know I could've used Titanium Backup but that not the point rn)
Thanks in advance!!!
Austin:fingers-crossed:
Install TWRP Pitch Black and Install Magisk for Treble ROM
[ HELP I have researched everywhere on the internet and I'm not sure what to do. I have a REDMI 4A wit AEX ROM OREO8.1 installed, TWRP 3.2.2.0 Official (for Redmi 4A on the twrp website) and tried to flash Magisk v.16. Error 1 mount vendor shows up in twrp. Many YouTubers says I should flash boot.img. I've already flashed the boot.img of the given AEX ROM OREO 8.1, but the same error occurs. I tried to search for answers, and what I found was that apprently aosp oreo ROMs usually are Treble ROMs. Downloaded Termux app and checked if ROM was treble = false = NOT Treble! Then others say I have to flash a modded vendor version of twrp. (Link: (add Https here)//androidfilehost.com/?fid=674106145207489212) Haven't tried it out just wanted to make sure if I should or not, bacuse the last time I tried to flash a different twrp, I had to flash the original one back using ADB...
Btw I had given up at some point and I flashed SuperSU successfully. Why Can I flash SuperSU but not Magisk?? I fully unrooted SuperSU and am ready to try flashing Magisk again. If anyone has any idea how to fix this, pleeeeeease tell me I need Snapchat to work while having root (yes I know I could've used Titanium Backup but that not the point rn)
Thanks in advance!!!
Austin:fingers-crossed:
Yup, you must use TWRP Vendor if you want to use magisk in AEX Oreo.
Han usb Deccan if DHC dry j
Wrong section.
Install TWRP Pitch Black, then install magisk for treble rom
That version may have bugs try the newer versions
Try with Pitch Black recovery or Orange Fox recovery
Same for me and than i using BATIK Recovery for fix it
Solved Magisk error!
I've tried so many Recoveries and after trying more than 5 recoveries and about 7 Different ROM I finally got the answer.
So basically now that Redmi 4A is treble based, hence it has now a new Partitioning vendor based. For that you'll need new Recovery that support vendor mounting. I've tried the other Recoveries mentioned above and all of them are buggy. Go for the official TWRP vendor based Recovery. I found it here :
https://freaksterism.blogspot.com/2018/10/solved-cannot-mount-vendor-magisk.html?m=1
The steps are explained purely for Redmi 4A.
Use pitchblack recovery and all the problems will fix or install supersu and install magisk apk, grant root and install directly and then you can uninstall supersu with unsu zip
Here I bring to you the official Havoc-os 4.X ROM Android 11 and fully functional on Redmi 8
The intention of this post is to make a step-by-step tutorial on the installation of this excellent GSI ROM on Redmi 8 and give assistance in the installation process
All the development credits for this wonderful ROM go to the Havoc team
@Ruturaj Kadam
@jhenrique09
@SKULSHADY
Remember I am not a developer, if you are presenting any bugs let us know and you can contact the Havoc team on Telegram
I am not responsible for any damage caused to your device by not following the steps or negligence at the time of this process, All the steps were carried out and tested on my personal device and are confirmed, My device Redmi 8 3/32, the version that i tested Havoc-OS-v4.5-20210208-Official-arm64-ab.img.xz
Bugs
videos recorded with the default camera do not play
Update: Install the NGCam_7.4.104-v1.8-fix.apk Once the application is installed open it take a photo close the application, this will create a folder in the SD called Gcam, inside the Gcam folder create a folder and call it Config7 and inside this place the XML file Redmi 8 GCam 7.4.104.314953318 G_Modder.xml restart the application and you're done
the only bugs that have is slow motion record not work for now
Automatic brightness does not work
Update: to fix the automatic brightness on your device, after installing the ROM, put in the folder SYSTEM-OVERLAY the treble-overlay-xiaomi-redmi 8.apk and set the permission for the apk on 644 ( use root explorer ) and reboot ..... problem solved
the necessary files are at the end of the tutorial
Steps
Note: I did the installation coming from Mui 12.EU, and there was no problem in the installation process or in the boot process
If you come from Miui12 .EU or any other GSI Rom go to step 4, if you come from the Rom stock follow the this steps
1- First make a backup of all the necessary information in case something goes wrong you can easily recover, Charge the battery at least 80%
All your data will be deleted during the process
2- Unlock the Bootloader if you have not already done it or do not know how to, follow this post: http://en.miui.com/unlock/
3- Install a custon recovery, if you dont know how to, follow this post: https://c.mi.com/thread-2850424-1-0.html
4- Make wipe only to Cache, Dalvik, System, Data and Internal SD
5- Format data,( if it doesn't format the data you will have bootloop) then Reboot into Recovery
6- Copy all the files to the phone (Havoc-OS-v4.X-20200522-Official-arm64-ab.img you can find it by unpacking the zip), Magisk,Magisk Path Fix, Permisiver, Certification Patch.zip, opengapp (recommended nano or pico)
7- Install system image to system partition (on TWRP go to install-Install image-System) .
8- Flash Permisiver v5 (on TWRP go to install selec permisver_v5.zip)
9- Resize system partition to flash opengapps (on TWRP go to Wipe-Advanced Wipe-Select System on the list-Repair or Change File System-Resize)
To Root
once you have installed an resized the system
10- Flash the Magisk path fix (on TWRP go to install selec MagiskA11_PATH_fix.zip)
11- Flash Magisk (on TWRP go to install selec Magisk-v23.0.zip)
12- Flash Opengapps
1-Flash Certification Patch
1 - Make a wipe to Cache and Dalvik
1- Reboot
The boot process takes 5 to 10 minutes the first boot, in case of any problem in any of the stages you can reinstall Miui version fastboot with Mi flash tool and start again
Download link Rom image:
arm64-ab • Havoc-OS
Havoc-OS Downloads
download.havoc-os.com
OpenGapss Android 11: https://sourceforge.net/projects/opengapps/files/arm64/test/20210130/
Magisk:
Download Magisk Manager Latest Version 26.1 For Android 2023
Magisk Manager is an app which helps users to root their phone. With the help of Magisk you can run banking apps and also pass SafetyNet tests.
magiskmanager.com
Hey !
I have a stupid question. Do you upload the GSI ROM and the other files on a SD card or on the internal storage ? I was searching this guide on the morning but I was wondering about that...
Thanks for your answer
letouvetpierre said:
Hey !
I have a stupid question. Do you upload the GSI ROM and the other files on a SD card or on the internal storage ? I was searching this guide on the morning but I was wondering about that...
Thanks for your answer
Click to expand...
Click to collapse
Don't mind it, I haven't read all the article....
letouvetpierre said:
Hey !
I have a stupid question. Do you upload the GSI ROM and the other files on a SD card or on the internal storage ? I was searching this guide on the morning but I was wondering about that...
Thanks for your answer
Click to expand...
Click to collapse
You can place it in either of the two, as long as you can access the storage where you placed them from the recovery
D
letouvetpierre said:
Don't mind it, I haven't read all the article....
Click to expand...
Click to collapse
Dont worry
Darth Inferno said:
You can place it in either of the two, as long as you can access the storage where you placed them from the recovery
Click to expand...
Click to collapse
Okay thanks I think I will try this in the few days. Thanks for your guide !
Hey ! Do we need to flash a vbmeta image for Havocon boot ?
Is there any bugs when you install Havoc with TWRP ? 'cuz i'm a little bit experimented with TWRP but i'm shy with GSI...
Thanks for the answer
UPDATE :
I bricked my phone. When i arrived to the step 5 and i rebooted into fastboot (i would reboot into recovery...)
So, what can I do ? I installed MiFlashTool to unbrick my phone, if it can...
I tried to reboot from fastboot to twrp and this is what happened :
fastboot boot twrp.img
downloading 'boot.img'...
OKAY [ 2.141s]
booting...
FAILED (remote: unknown reason)
finished. total time: 2.771s
Thanks...
letouvetpierre said:
UPDATE :
I bricked my phone. When i arrived to the step 5 and i rebooted into fastboot (i would reboot into recovery...)
So, what can I do ? I installed MiFlashTool to unbrick my phone, if it can...
I tried to reboot from fastboot to twrp and this is what happened :
fastboot boot twrp.img
downloading 'boot.img'...
OKAY [ 2.141s]
booting...
FAILED (remote: unknown reason)
finished. total time: 2.771s
Thanks...
Click to expand...
Click to collapse
Hi, I need to know some things to help you, what ROM did you have before flashing Havoc? do you have the bootloader unlocked? When did you use My flashtool, what method did you use?
letouvetpierre said:
Hey ! Do we need to flash a vbmeta image for Havocon boot ?
Is there any bugs when you install Havoc with TWRP ? 'cuz i'm a little bit experimented with TWRP but i'm shy with GSI...
Thanks for the answer
Click to expand...
Click to collapse
In my particular case it was not necessary to flash vbmmeta as I comment in the OP I come from Miui12.eu, but it is necessary to avoid problems whatever the ROM you have before installing Havoc is to have the latest version of TWRP and have configured a lock pattern security in ROM access and in the flashing process I didn´t have problems
Hey!
I was on the stock ROM when i started to flash HavocOs.
I unbricked my phone with the MIUnlockTool V2 and my phone's still alive.
I booted on TWRP with fastboot boot TWRP.img 'cuz I can't boot to TWRP with volume up and power...
How can I flash HavocOs in the good way ?
I have Redmi 8 3/32 like you...
letouvetpierre said:
Hey!
I was on the stock ROM when i started to flash HavocOs.
I unbricked my phone with the MIUnlockTool V2 and my phone's still alive.
I booted on TWRP with fastboot boot TWRP.img 'cuz I can't boot to TWRP with volume up and power...
How can I flash HavocOs in the good way ?
I have Redmi 8 3/32 like you...
Click to expand...
Click to collapse
Ok the first thing is that you have the bootloader unlocked, if it is that way regardless of the stock version of the rom you have when installing twrp you must install magisk to ensure that the Recovery remains fixed in this link is a tutorial on how to install it, that tutorial was made by me and approved by Xiaomi https://c.mi.com/thread-2850424-1-0.html ,
install the latest version of TWRP and as it says in the tutorial then flash magisk, once you have everything ready install miui 12.eu do not do many settings except create a blocking pattern when starting the rom this is used by TWRP to be able to decrypt the internal memory
All ready do the steps as indicated in this tutorial (If you come from Miui12 .EU or any other GSI Rom go to step 4)
If for some reason you have a problem, use MI flashtool to return to the stock rom, but make sure to use the snapdragon method, select MIflash and when opening the screen at the bottom select clean all, this will prevent you from blocking the bootloader and you can start again without problems (note when selecting clean all at the end it will give you an error for not being able to block the bootloader and the device will restart, do not worry it will restart normally without problems)
Darth Inferno said:
Ok the first thing is that you have the bootloader unlocked, if it is that way regardless of the stock version of the rom you have when installing twrp you must install magisk to ensure that the Recovery remains fixed in this link is a tutorial on how to install it, that tutorial was made by me and approved by Xiaomi https://c.mi.com/thread-2850424-1-0.html ,
install the latest version of TWRP and as it says in the tutorial then flash magisk, once you have everything ready install miui 12.eu do not do many settings except create a blocking pattern when starting the rom this is used by TWRP to be able to decrypt the internal memory
All ready do the steps as indicated in this tutorial (If you come from Miui12 .EU or any other GSI Rom go to step 4)
If for some reason you have a problem, use MI flashtool to return to the stock rom, but make sure to use the snapdragon method, select MIflash and when opening the screen at the bottom select clean all, this will prevent you from blocking the bootloader and you can start again without problems (note when selecting clean all at the end it will give you an error for not being able to block the bootloader and the device will restart, do not worry it will restart normally without problems)
Click to expand...
Click to collapse
Hey!
I thought about something this afternoon : if I flash HavocOS with adb and fastboot, we also haven't any problems with TWRP installation ! But the problem is that I haven't found any wiki to do that and i won't transform my phone to a beta tester....
Thanks a lot for your help but I think i will wait until a custom rom of LineageOs or HavocOs...
Hi . I am currently running havoc is 3.12 on my device I tried multiple times to flash this ROM without any success. Is not installing open gapps a problem ? Anyways when I flash this rom without flashing the certification patch I get a no os installed warning before rebooting from orange fox recovery but when I flash the certification I no longer get this message. Etherway I am getting stuck on a bootloop . How can I solve this issue? I did all the steps correctly wiping the correct partitions and formating data . Edit I wiped cache and dalvik after the bootloop without any success .
Dragonnuu said:
Hi . I am currently running havoc is 3.12 on my device I tried multiple times to flash this ROM without any success. Is not installing open gapps a problem ? Anyways when I flash this rom without flashing the certification patch I get a no os installed warning before rebooting from orange fox recovery but when I flash the certification I no longer get this message. Etherway I am getting stuck on a bootloop . How can I solve this issue? I did all the steps correctly wiping the correct partitions and formating data . Edit I wiped cache and dalvik after the bootloop without any success .
Click to expand...
Click to collapse
Hey !
I had the same bug before installing the v3.12 version.
I think it goes from the Permissiver v5. I think we should flash it to have the Havoc v4.
I'll test later if I have the time to do this and I'll inform you about the possibilities.
Hope I can help.
letouvetpierre said:
Hey !
I had the same bug before installing the v3.12 version.
I think it goes from the Permissiver v5. I think we should flash it to have the Havoc v4.
I'll test later if I have the time to do this and I'll inform you about the possibilities.
Hope I can hel
Click to expand...
Click to collapse
Thanks for replying and trying to help but last night I managed to get havoc 4.1 is installed by flashing lineage first (using another guide from this category). I will try again to get havoc 4.1 working without flashing lineage as soon as posible because I am curious .
Used online available guides bit still not able to install magisk on Hovoc 4.1
Anyone succeeded?
mwaseem851 said:
Used online available guides bit still not able to install magisk on Hovoc 4.1
Anyone succeeded?
Click to expand...
Click to collapse
Magisk doesn't work on Android 11
letouvetpierre said:
Magisk doesn't work on Android 11
Click to expand...
Click to collapse
Finally managed to flash Magisk on Havoc 4.1 with the help of youtuberking (telegram and YouTube).
How: just flash Magisk path fix before magisk and it's good to go.
I was using pixel experience ROM for some time and I tried to update to the latest plus edition. The installation guide recommended full format data and flashing. I did as instructed. Now I'm stuck in booting into TWRP recovery. I looked up a few kinds of stuff and none of them worked. Is anyone else facing the same problem? has anyone got a working fix? I tried removing the TWRP folder, re-flashing TWRP with TWRP and orange fox recover, and then flashing ROM. non helped. got a broken phone now any help is appreciated.
basukala said:
I was using pixel experience ROM for some time and I tried to update to the latest plus edition. The installation guide recommended full format data and flashing. I did as instructed. Now I'm stuck in booting into TWRP recovery. I looked up a few kinds of stuff and none of them worked. Is anyone else facing the same problem? has anyone got a working fix? I tried removing the TWRP folder, re-flashing TWRP with TWRP and orange fox recover, and then flashing ROM. non helped. got a broken phone now any help is appreciated.
Click to expand...
Click to collapse
Use the correct TWRP if the rom is in A11 use A11 TWRP etc..
https://androidfilehost.com/?w=files&flid=318260
Twrp/wipe/format data write yes reboot Twrp/flash rom.
what do you mean by rom is in A11? I have redmi k20 pro raphael phone. I am using twrp for raphael code name.
basukala said:
what do you mean by rom is in A11? I have redmi k20 pro raphael phone. I am using twrp for raphael code name.
Click to expand...
Click to collapse
AOSP roms can be under ANDROID 11 or 12 or 13.
PixelExperience
Android OS version: 11.0.0_r40
The first version is in A11 and since August in A12
Version: 12
File name: PixelExperience_raphael-12.1-20220820-1826-OFFICIAL.zip
I had A12 then. I flashed pixel experience 12.1 on May 28(PixelExperience_Plus_raphael-12.1-20220528-1605-OFFICIAL.zip) and it went thru just fine. Now the updates of 8/20 bricked the phone.
After format data, I get the Readonly info screen, I swipe to allow modification, side loads the latest download PixelExperience_Plus_raphael-12.1-20220820-1448-OFFICIAL.zip, and restart, but back to TWRP recovery.
Some things I tried
0. https://wiki.pixelexperience.org/devices/raphael/install/
1. https://www.getdroidtips.com/keep-booting-twrp-recovery/
2. https://forum.xda-developers.com/t/pixelexperience-stuck-in-bootloop.4435533/ ( it's shown for beryllium but I did for Raphael code with all files related to Raphael version such has recovery and pixel exp. img file
Any other flow I can try to get it fixed ?
I'm thinking to reverting back to MIUI is nth works.
basukala said:
I had A12 then. I flashed pixel experience 12.1 on May 28(PixelExperience_Plus_raphael-12.1-20220528-1605-OFFICIAL.zip) and it went thru just fine. Now the updates of 8/20 bricked the phone.
After format data, I get the Readonly info screen, I swipe to allow modification, side loads the latest download PixelExperience_Plus_raphael-12.1-20220820-1448-OFFICIAL.zip, and restart, but back to TWRP recovery.
Some things I tried
0. https://wiki.pixelexperience.org/devices/raphael/install/
1. https://www.getdroidtips.com/keep-booting-twrp-recovery/
2. https://forum.xda-developers.com/t/pixelexperience-stuck-in-bootloop.4435533/ ( it's shown for beryllium but I did for Raphael code with all files related to Raphael version such has recovery and pixel exp. img file
Any other flow I can try to get it fixed ?
I'm thinking to reverting back to MIUI is nth works.
Click to expand...
Click to collapse
Do you use this TWRP?
twrp-3.6.2_9-0-raphael-TeamWin.imgTwrp
wipe/format data write yes reboot twrp
flash the rom
Use this O.F https://androidfilehost.com/?fid=15664248565197208249
basukala said:
I had A12 then. I flashed pixel experience 12.1 on May 28(PixelExperience_Plus_raphael-12.1-20220528-1605-OFFICIAL.zip) and it went thru just fine. Now the updates of 8/20 bricked the phone.
After format data, I get the Readonly info screen, I swipe to allow modification, side loads the latest download PixelExperience_Plus_raphael-12.1-20220820-1448-OFFICIAL.zip, and restart, but back to TWRP recovery.
Some things I tried
0. https://wiki.pixelexperience.org/devices/raphael/install/
1. https://www.getdroidtips.com/keep-booting-twrp-recovery/
2. https://forum.xda-developers.com/t/pixelexperience-stuck-in-bootloop.4435533/ ( it's shown for beryllium but I did for Raphael code with all files related to Raphael version such has recovery and pixel exp. img file
Any other flow I can try to get it fixed ?
I'm thinking to reverting back to MIUI is nth works.
NOSS8 said:
Do you use this TWRP?
twrp-3.6.2_9-0-raphael-TeamWin.imgTwrp
wipe/format data write yes reboot twrp
flash the rom
Click to expand...
Click to collapse
Wipe everything, system, vendor, internal storage, dalvik, cache via advanced wipe, then flash firmware and vendor or if your rom has included firmware then just flash the rom directly. Try to boot into OS if it still bring back to twrp then again repeat the above steps and this time flash stock vendor and firmware from mi website and try to boot into OS.
Click to expand...
Click to collapse
All the best
yes using the team win version of TWRP. Used Orange Fox recovery. ( nice look and feel and features btw). But they didn't work either. What could I try more? Could I be able to revert back to MIUI stock ROM ? let me know if you have good resources. Thank you very much for your time and efforts
basukala said:
yes using the team win version of TWRP. Used Orange Fox recovery. ( nice look and feel and features btw). But they didn't work either. What could I try more? Could I be able to revert back to MIUI stock ROM ? let me know if you have good resources. Thank you very much for your time and efforts
Click to expand...
Click to collapse
Back to MIUI
https://forum.xda-developers.com/t/flash-tool-guide-use-xiaomi-flash-tool.4262425/
flashed stock miui rom for now. Will tap into pixel rom in few days.
now that I think, I think I did a blunder, thinking I was in A12. Can you point me to A12 firmware for Redmi k 20 pro? I"m looking into https://miuirom.org/phones/xiaomi-12, but they seem to be recovery and not firmware. I'm not sure if recovery comes with firmware. As I need to format to install, will the firmware stay or not?
basukala said:
now that I think, I think I did a blunder, thinking I was in A12. Can you point me to A12 firmware for Redmi k 20 pro? I"m looking into https://miuirom.org/phones/xiaomi-12, but they seem to be recovery and not firmware. I'm not sure if recovery comes with firmware. As I need to format to install, will the firmware stay or not?
Click to expand...
Click to collapse
Xiaomi has stopped updating on Android version 11.
Which rom do you want to install?
basukala said:
now that I think, I think I did a blunder, thinking I was in A12. Can you point me to A12 firmware for Redmi k 20 pro? I"m looking into https://miuirom.org/phones/xiaomi-12, but they seem to be recovery and not firmware. I'm not sure if recovery comes with firmware. As I need to format to install, will the firmware stay or not?
Click to expand...
Click to collapse
Why bothering to manually search here and there for official ROMs
Install the app:
MIUI Downloader - Apps on Google Play
MIUI upgrade app for Mi users.
play.google.com
and the app will show you links to download the latest Global, EEA, etc, zip/recovery or tgz/fastboot, or you can scroll through the older versions and pick an older if you wish
Btw, latest are MIUI 12.5, A11 - there are no official A12 ROMs for Mi 9/Redmi K20 line of models
Even if they receive MIUI 13, it will be (for some already released, but eg China only, etc) it will be A11
Same issue, I guess this is it for me. Time to buy a new phone rather than accidentally losing data from time to time with custom ROMs. I wonder if they didn't know such issue exists before releasing it to the public.