Related
Introduction:
Hello for everybody, I'm here again . Sorry for the late . Very Merry Christmas and a Wonderful New Year to all you. Ok, I work hard on this custom rom for 2 months. I'm very happy to see a lot of features and improvements, the rom is based on Italy Firmware. Now lets start !
Warning:
Code:
- I'm not responsible for error or software brick caused on your device.
- Your warranty is void if you used the ROM.
Features:
Latest firmware
Rooted with latest Supersu Binary
Deodexed
Init.d support
Removed a lot of apps (makes boot time and improves performance)
Latest version of Busybox.
Zipaligned
Fast and Light Launcher (based on Touchwiz T210 modifed by me)
Scary scores on benchmarks
Ram managment
Battery saver tweaks
Better Scroll
Lot of improvement and upgrade of the performance on GPU
Touch render GPU
80% improvements less laggy, gagging and more performance on the whole User Interface
Dalvik runtime time reduce to open apps and games
Excellent performance on games (gta sa now can be played on max with effects max without problems)
CPU control based on scripts
Batter save memory ram (more free for your use)
Reduce boot and power off times
4-way Reboot Menu
Multi-Windows
Lot of more I may have forgot.
Note: art runtime don't work, I addict only to give small boost to remount runtime (use only if the rom take any lag,impossible hahahahahaha kidding ) .
Bugs:
None so far
Tell me if you find one
Download:
The ROM can be downloaded on this link: Sweet Dreams v1 (811MB)
Version V2 (Pre release)
https://www.androidfilehost.com/?fid=95916177934527839
Sweet Dreams V3.1
https://www.facebook.com/groups/529435540489595/
Installation:
1) Download and Save the file on any folder, it's better to save on your sd card
2) Go to your custom recovery
3) Wipe data/cache
4) Wipe system
5) Now go to your folder where you save sweet dreams v1.zip
6) Install. Wait around 10 minutes may take long time to install. When done, reboot and enjoy your sweet dreams
Changelog V3.1 Release:
Better ram free
Fix hotspot wifi
Fix issue with conflict with some script (cause issue performance)
new kernel build (I don't modify just samsung gives update), when tab 3 charge again,is more fast.
Fix some function busybox 1.20 (please don't change the version,this version is the best and don't cause any low performance,is very stable, thanks for understand)
More free GPU usage (increase performance in some games, I test gta san andreas and oddworld stranger wrath both on maximum quality and effect, I get nice fps )
Systemui and touchwiz now is more stable and fast
Rom is clean if you find some app may it don't necessary for tab 3 please tell me I will accept your suggestion*
This rom is more clean than version V1.
Add some script increase performance GC vivante 1000, (now tab 3 have nice power for high level graphics games, have funny XD)
odex rom again (temporaly 4 way reboot removed from version V2, because I need descompile policy and service to put lines with 4 way reboot,and some people know, my latop don't back for me at moment, it will back next month , if some people know add 4 way reboot with odex files, your help is very welcome for me)
I will put more language on this rom, I need remove others. Because for some test.
Sd card boost (40% more performance on I/O games )
Better stream
3g booster (10% better than last version)
New firmware,based on Indian
Battery economy optimized without reduce performance
fix time execution on archidroid (execution is better now).
This rom is pre-release V2, tell me if you find some problem or great results than version V1.
Sweet Dreams V3
Change Logs:
Deodexed Again
4 away menu add
New Latest Firmware
Fix problems with signal and call
More Clean Than ever
More Fast and Powerful
Stable Release version
Add Security Parts Kernel
Update libraries from Kernel
Better Ram manager
No Bugs, Fast than light
Sweet Dreams V3.1
Fix the problem charging offline
Add few more improvements
A little change in system files
No bugs
(the download you will find on my group from facebook, send request to participate on group, I will add you .
Spoiler Next Update for Sweet Dreams V3.2
Kernel with optimization and very strong to run many games, I begin to work on this and I get good results, but I need more time to make it more stable and better
(please note, google play and google play services will update when you put your account, if you want to install into ''system'' use link2sd to integrate than , another app if want to remove is ''samsungaccount'' the only app I can't find on pc, but it inside on ROM, use link2sd too to remove it. The is very clean, I remove a lot of Bloatware and apps)
Credits and Thanks:
Big thanks to @Nonta72, he helped me a lot . :highfive:
Thanks for @gr8nole build cwm and trwp for our tablet. :angel:
Thanks for Andy to test e send me results
If I help you give a thanks :good:
hehk1234 said:
.....
Click to expand...
Click to collapse
Good job :good:
Keep it up
Nice to see new rom for our tab!!!
Sent from my GT-N7000 using XDA Premium 4 mobile app
Silently you kept working all of this while...Well done yet to DL..just woke up
Thanks. I appreciate his praise and patience for my delay
Will it work for t210R?
sent from my SM-T210R using xda PREMIUM
rookie12 said:
Will it work for t210R?
sent from my SM-T210R using xda PREMIUM
Click to expand...
Click to collapse
No. Only for T211
hehk1234 said:
No. Only for T211
Click to expand...
Click to collapse
Ok ?
sent from my SM-T210R using xda PREMIUM
@hehk1234
i am just thinking what does it include(new)?
its size is 800mb+! why is it so big?
i have not downloaded it yet and might not be able to download it for a few days, so cant test to find it out myself,
will download it next year
sscsps said:
@hehk1234
i am just thinking what does it include(new)?
its size is 800mb+! why is it so big?
i have not downloaded it yet and might not be able to download it for a few days, so cant test to find it out myself,
will download it next year
Click to expand...
Click to collapse
Read features hehehe. 811mb big rom.... I'm accord with you, but don't worry I promisse for you this rom is very fast. I don't talk what the rom have (spoiler never e.e kkk kidding). Just test my friend and post results :fingers-crossed:
Hey folks look at my question on post. Look up and answer. I will build version V2 sweet dreams, and I need your opinions
Nice! This is a great ROM.
Hopefully we see more of sweet dreams.I dont like the sweet dreams boot screen.Could you change that in next version?
MKguy said:
Nice! This is a great ROM.
Hopefully we see more of sweet dreams.I dont like the sweet dreams boot screen.Could you change that in next version?
Click to expand...
Click to collapse
This is default bootanimation.zip. But if you don't Like you can change in your self, go to system-media-(here you will find bootanimation.zip) change with bootanimation you like and set correct permission (RW-R-R)
hy thanks for nice room..but it's have small bug at Mobile Hotspot
when i try to turn on always off again and than my tab trying to turn on again and off again
always like that,,hope you can solve this issue at new version cheerss
I think its best this rom is debloated and moved to pure android because the ram usage is ridiculous and there is just too much of a mess with that bloat crap.
You mention alot of features but I can't find the ram manager thing you mention.Is this rom already busyboxed and init.d script tweaked or Am I missing something?
Is it possible to change the status bar icons to that of lollipop.?
at least, this rom could be a solace for waiting CM11 released
I should try it tonight...
MKguy said:
I think its best this rom is debloated and moved to pure android because the ram usage is ridiculous and there is just too much of a mess with that bloat crap.
You mention alot of features but I can't find the ram manager thing you mention.Is this rom already busyboxed and init.d script tweaked or Am I missing something?
Click to expand...
Click to collapse
You missing. I don't based ram manager on init.d or build.prop, just script based team kernalize.
ethical ricado said:
Is it possible to change the status bar icons to that of lollipop.?
Click to expand...
Click to collapse
Yes, I pre patched system framework to use xposed. You can try use gravitybox. Good luck :good:
bangdes said:
at least, this rom could be a solace for waiting CM11 released
I should try it tonight...
Click to expand...
Click to collapse
You begin your build cm11 or wait for me build cm11 ? Because if I start build cm 11 for tab 3 I will take a big time because I don't have my computer at moment . But if you build cm11 I will wait bro :highfive:
Hello guys just wanted you bring to your attention the Exceed Kernel built by @kairi_zeroblade for us Verizon users, check out the thread here:
http://forum.xda-developers.com/note-4/snapdragon-dev/kernel-xceed-t3344742/post69474753
#######PLEASE FLASH KERNEL FROM INTERNAL STORAGE AND MAKE SURE THAT "SYSTEM" IS CHECKED UNDER "MOUNT" OPTIONS IN TWRP###########
#######All builds are based on the supersu 2.76 boot.img if you have supersu 2.78 and above, you will probably run into app permissions issues!!!##########
The Exceed 4F "V" varient is based on verizons latest PG2 kernel. It has been highly optimized by Kairi_zeroblade and includes:
All of the latest note 4 kernel sources so you have all of the most current fixes and optimizations from Samsung
Wakelock fixes
Exploit fixes
Ramdisk optimizations
GPU calibrations
It is compatible with note 7/s7 ports and stock TW Roms
Fully SELinux permissive(helps with installing viper4android and other mods)
And much more that I can't remember!
Kairi_zeroblade has all of the kernel settings pre tuned for amazing battery life and fast stable performace.
It is NOT recommended that you adjust the kernel settings EXCEPT for the ones available in Synapse.
Just flash and enjoy!
Do not forget to also flash the latest gpu drivers here:
https://drive.google.com/file/d/0B_3BNlXOVtO5bHp2MS12b291TjQ/view
These are based on the most current 805 adreno source (ph4 sprint I believe)
///////This kernel may give you the Volte and cloud (wifi calling) icons in the notification bar) see post 3 for my tip to disable Volte
Any questions or feedback, please post in the original Exceed thread^^^:good::good:
Side note........
///Kari_zeroblade does not like to add experimental features because they risk breaking the stability and battery life on the kernel. He keeps it simple and highly optimized. If there is a performance benefit you can be sure he will try to incorporate it though
Post#2 changelogs
Post#3 Volte icon
Post#4 UnderVolt/UnderAmp
######## BUILD 4M #######
2/2/17
http://forum.xda-developers.com/note-4/snapdragon-dev/kernel-xceed-t3344742/post70357447
Camera Improvements
Updated to the latest DPL2 source
SETCPU partially implemented(should give nice battery life improvements.)
Built in anykernel format so that should solve Supersu issues:good:
######## BUILD 4K ########
12/4/16
http://forum.xda-developers.com/note-4/snapdragon-dev/kernel-xceed-t3344742/post69924893
New Nightlies guys!!
As promised I did bring a solution to the fts_wakelock and some security updates from Google..
Grab the test builds for your device here
#######PLEASE FLASH KERNEL FROM INTERNAL STORAGE AND MAKE SURE THAT "SYSTEM" IS CHECKED UNDER "MOUNT" OPTIONS IN TWRP BEFORE YOU FLASH###########
#######All builds are based on the supersu 2.76 boot.img if you have supersu 2.78 and above, you will probably run into app permissions issues!!!##########
Thank you, and for your issues, just attach a log on your post and we will see what we can do for you.. :good:
Another Thanks to those who helped me get my build laptop fixed.. Merry Christmas to you..
######## BUILD 4F ########
Kairi_zeroblade:
Grab it from here
FG = is for F and G variants
V = is for Verizon
T = is for TMobile version
P = is for Sprint version
As promised, these builds can now be flashed on both NOTE 7 ports floating around here and at the same time with STOCK rom's too..if you ever find any issues do report with logs..else as usual I don't give a damn..I don't know why you're using a stock source compiled kernel with nothing and yet scores are lower than usual stock samsung kernel and you're like an Angry Bird jumping happily, when you have this project to "help and improve" (just my 2 cents) which has shown great potential (and worth IMHO)..
I'm sure you're aware you only now have a handful of devs supporting your device and if in the process you loose them all due to users being disrespectful and uncooperative then its your loss and not ours..
F Variants wifi needs testing though the necessary measures to make it work are already in place and has been checked..
Some patches to fix some Exploits were already added in, same thing goes with some upstream fixes from Google and CAF..Ondemand crashing is also been fixed (in my case) as I have tried to replicate the issue and grabbed something to ponder on..
Again for those who are supporting the project, Thank you very much!!
######## BUILD 4E ########
http://forum.xda-developers.com/note-4/snapdragon-dev/kernel-xceed-t3344742/post69363834
kairi_zeroblade said:
This test is specifically for the Verizon Note 4 running stock MM (latest, I forgot the build..lol) as this uses the updated ramdisk from that OTA update..this build also uses the Verizon Samsung Config so this is the proper kernel for your variant..please make sure you are on the latest MM Bootloader and Baseband for things to properly work (though @joemill tested this out and he had no issues to report)..this build also incorporates important kernel updates from the DPH2 (if I remember it right!!) from the N910P (Sprint, which will be supported once I get the laptop fixed, thanks to @joemill again for the boot.img dump)..I'll also include a GPU driver update package from the same update..
Enough with the chit-chat let the games for Verizon begin..
Grab the build here..
and GPU Drivers here..
Thank you very much to those who take time to read and enjoy my posts..
Click to expand...
Click to collapse
The kernel is based on the latest Verizon build PG2 I believe. As long as your bootloader is unlocked and on PD1 PD3 or PG2 (any marshmallow Verizon bootloader) then this should work for you
If you are still on 5.1.1 lollipop follow this guide to upgrade:
http://forum.xda-developers.com/not...firmware-safe-upgrade-to-marshmallow-t3402727
This kernel was tested on the latest paulpizz rom release.
I personally do not use VoLTE or WiFi calling and have never activated them or set them up on my phone. I never had either the cloud icon or the VoLTE icon with Paulpizz kernel, or Oscar kernel. When I flashed exceed the VoLTE icon appeared even though it is not enabled in the settings, "advanced calling" section.
I BELIEVE that those icons appear from flashing a modified kernel, more specifically a selinux permissive kernel(since this is the only kernel I've found that is permissive). Jasmine rom 6 had the icons appear with its selinux permissive kernel so in version 7 he left the kernel selinux enforceing.
Since I do not use VoLTE I went to others.Xml in the system/csc folder and edited this line:
<CscFeature_IMS_EnableVoLTE>TRUE</CscFeature_IMS_EnableVoLTE
To
<CscFeature_IMS_EnableVoLTE>FALSE</CscFeature_IMS_EnableVoLTE
Now the VoLTE icon is gone! and the 4glte icon is gray when connected to wifi instead of white all the time(I believe this means that 4glte radio is In a power save mode when not needed because you have a WiFi connection, also this improved my battery life quite a bit)
I personally would much prefer a kernel like exceed that has far better battery life and a selinux permissive kernel(so you can easy install vipers Android mods) even if it displays those icons.
I haven't had time to do anymore research but I would ask other verizon kernel developers(Paulpizz or Oscar since kari_zeroblade doesn't have a Verizon phone to test on) if there is a trick to remove those icons or if it is truly because the kernel is selinux permissive.
I would not mess around with any settings in kernel auditor or other kernel tweaking apps EXCEPT for synapse.
(Don't bother under clocking. The phone barely ever hits those top frequencys and when it does its better to complete the process fast and quick rather then hanging at a lower clock speed for a longer time. )
Undervolt and under amp in the synapse app can help your phone run cooler which will keep it from throttling cpu and gpu.
I personally run -45 uv and -12ua with zero issues in stability. If you undervolt you should always under amp to compensate for the drop in voltage. If you go to low your phone will just become unstable and probably lock up or reboot.
EVERY time you boot you will need to re apply those settings for safety.
Reserved~
The Synapse app days No UCI?
"Crack flashing is better than crack smoking"
Matthenson20 said:
The Synapse app days No UCI?
"Crack flashing is better than crack smoking"
Click to expand...
Click to collapse
Did you flash from your internal storage or external sd card? Also make sure that "system" is checked under the "mount" menu in TWRP
If it doesn't install then send us a twrp log after you make the attempt to flash the kerenl.
joemill said:
Did you flash from your internal storage or external sd card? Also make sure that "system" is checked under the "mount" menu in TWRP
If it doesn't install then send us a twrp log after you make the attempt to flash the kerenl.
Click to expand...
Click to collapse
Did all that, had synapse installed and did tweaks to voltages and amps, had a random reboot then synapse quit working
Will this work with N7 ports on? I'm running Chevy 2.7.3 build based on N5 port I believe
"Crack flashing is better than crack smoking"
Matthenson20 said:
Did all that, had synapse installed and did tweaks to voltages and amps, had a random reboot then synapse quit working
Will this work with N7 ports on? I'm running Chevy 2.7.3 build based on N5 port I believe
"Crack flashing is better than crack smoking"
Click to expand...
Click to collapse
That's strange. The reboot could be because you under volt or under amp too much. How far did you adjust them?
It should work with all ports but you might be the first person to test on that rom my friend. L
joemill said:
That's strange. The reboot could be because you under volt or under amp too much. How far did you adjust them?
It should work with all ports but you might be the first person to test on that rom my friend. L
Click to expand...
Click to collapse
I'll retry, I went -40 and -12, I'll try 30 and 8
"Crack flashing is better than crack smoking"
Matthenson20 said:
I'll retry, I went -40 and -12, I'll try 30 and 8
"Crack flashing is better than crack smoking"
Click to expand...
Click to collapse
Every phone is going to be different, some may not undervolt at all, don't worry too much if it doesn't. It will not save very much battery life at all and will only make the phone run slightly cooler. The kernel should run really cool and have great battery life by default
joemill said:
Every phone is going to be different, some may not undervolt at all, don't worry too much if it doesn't. It will not save very much battery life at all and will only make the phone run slightly cooler. The kernel should run really cool and have great battery life by default
Click to expand...
Click to collapse
Yes probably my fault, saw a new kernel abs started foaming at the mouth lol, going to reflash tonight and give it a go, will report in 24 hrs and let thread know
"Crack flashing is better than crack smoking"
Matthenson20 said:
Yes probably my fault, saw a new kernel abs started foaming at the mouth lol, going to reflash tonight and give it a go, will report in 24 hrs and let thread know
"Crack flashing is better than crack smoking"
Click to expand...
Click to collapse
Haha I don't blame you. It's hard to resist the temptation to tweak. Just flash let it settle and enjoy
joemill said:
I.
Since I do not use VoLTE I went to others.Xml in the system/csc folder and edited this line:
<CscFeature_IMS_EnableVoLTE>TRUE</CscFeature_IMS_EnableVoLTE
To
<CscFeature_IMS_EnableVoLTE>FALSE</CscFeature_IMS_EnableVoLTE
Now the VoLTE icon is gone! and the 4glte icon is grayed out
Click to expand...
Click to collapse
I'm sorry for the off topic comment, but thank you for this fix. I've been looking for a way to gray out that 4g icon while connected to wifi for awhile. :good: @joemill
kevintm78 said:
I'm sorry for the off topic comment, but thank you for this fix. I've been looking for a way to gray out that 4g icon while connected to wifi for awhile. :good: @joemill
Click to expand...
Click to collapse
I think the battery life is better with it disabled too
Still a no go in Chevy's 2.7.3 build. Must be because it's a Note 5 port, Synapse app just says no UCI. I installed from phone memory with system mounted. Cleared caches and everything
"Crack flashing is better than crack smoking"
I have been using this kernel successfully for the last week on the Note4 Grace Note7 based ROM v2. It has not had any crashes, or problems that I have been able to notice. I have not tweaked any of the kernel settings in the synapse app.
I have not specifically paid attention to the battery life after flashing, as I have not underclocked yet.
Is there an undervolt and underclock baseline that all Note 4s should be safe to start at?
Thanks.
signupstuffid said:
I have been using this kernel successfully for the last week on the Note4 Grace Note7 based ROM v2. It has not had any crashes, or problems that I have been able to notice. I have not tweaked any of the kernel settings in the synapse app.
I have not specifically paid attention to the battery life after flashing, as I have not underclocked yet.
Is there an undervolt and underclock baseline that all Note 4s should be safe to start at?
Thanks.
Click to expand...
Click to collapse
Don't bother under clocking. The phone barely ever hits those top speeds and when it does its better to complete the process fast and quick rather then at a lower clock speed.
You can adjust the undervolt and under amp though, this will help your phone run a little cooler so it shouldn't throttle the cpu as quickly. It will not really help battery life though and you need to manually set it again after each boot.
Start with -45 under volt and -12 under amp (you need to under amp to compensate for the under volt) if the phone runs smooth (no lag or reboots for a few hours) then push it a little more.
You won't do any damage to the phone. If you push it too far it will just reboot and you'll be on default exceed settings.
I hope this isn't too dumb of a question, but I was wondering if I should flash the gpu drivers on my verizon Note 4. Thank you
dhplap said:
I hope this isn't too dumb of a question, but I was wondering if I should flash the gpu drivers on my verizon Note 4. Thank you
Click to expand...
Click to collapse
Yes they should work on all Note 4s. I run it on mine
Code:
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this MOD
* before used it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*/
Default thermal config lagging any heavy games(like asphalt 9 pubg etc.)
I changed values and fixed lag.
Thermal Config Select :
Default:Normal Games and Applications cool and medium performance
but Heavy Applications low performance and thermal throttling(Antutu 140-150k)
V1:Normal Games and Applications cool and high performance
but Heavy Applications +5-10 celcius to phone and medium performance(Antutu 155-165k)
V2:Normal Games and Applications cool and high performance
but Heavy Applications +10-15 celcius to phone and high performance(Antutu 160-170k)
Requirements :
Xiaomi Mi5s Plus
LineageOS (installed and rooted)
Floppy Kernel HMP Linaro(installed-recommended)
Root Explorer or Magisk Installed v15.0 and up
Thermal File
Brain
Downloads :
Look Attached Files
Instructions :
Method 1 :
Download the modded conf file to phone storage
Backup your system or conf file
Copy conf file at thermal config directory(use any root explorer)
Change conf file permissions to rw-r-r
Reboot your phone
Thermal Config Directory:
Nougat: "system/etc"
Oreo-Pie:"system/vendor/etc"
Method 2 :
Use Magisk flash module(not tested)
Enjoy
Benchmarks:
Look Attached Thumbnails
Asphalt9 fps meter for gltools used
Pubg fps meter and graphics unlock for gltools used
Thanks for the mod!!?
Is that mod fix los heating issue ?
thewarrior2 said:
Is that mod fix los heating issue ?
Click to expand...
Click to collapse
does not completely solve the heating, but the device does not heat up as much as the heat it generates when it is thermal throttling.
Can we use this on mi 5s(capricorn)?
rhp_engcoy said:
Can we use this on mi 5s(capricorn)?
Click to expand...
Click to collapse
Do not try this file mi5s because thermal sensors diffirent,but i found lineageOS repos capricorn thermal file and i edit for you and share mi5s thread,you try and share benchmarks and game performance:good:
I had this result, why the score of the gpu is 10 000 points less your score? What can i do?
Lorenzopapi99 said:
I had this result, why the score of the gpu is 10 000 points less your score? What can i do?
Click to expand...
Click to collapse
Thanks share your benchmark result.
What do you use rom?kernel?thermal config v1 or v2?
I used now my phone LineageOS16+Floppy Kernel Linaro HMP+Thermal Config V2 and i have 160-170k antutu score with looking thread pictures,and gaming performance perfect.
ByBlaCk said:
Thanks share your benchmark result.
What do you use rom?kernel?thermal config v1 or v2?
I used now my phone LineageOS16+Floppy Kernel Linaro HMP+Thermal Config V2 and i have 160-170k antutu score with looking thread pictures,and gaming performance perfect.
Click to expand...
Click to collapse
I'm using your same configuration, which mode do you use in spectrum app?
Lorenzopapi99 said:
I'm using your same configuration, which mode do you use in spectrum app?
Click to expand...
Click to collapse
Spectrum app?I don't know,you have to explain a little more about this because i did not understand,i used default lineageOS16,added floppy kernel linaro hmp and my v2 thermal config,suggestion to you try this with clean install:good:
ByBlaCk said:
Spectrum app?I don't know,you have to explain a little more about this because i did not understand,i used default lineageOS16,added floppy kernel linaro hmp and my v2 thermal config,suggestion to you try this with clean install:good:
Click to expand...
Click to collapse
Floppy kernel is supported by spectrum, you can download it from play store, and in the app there are 4 different mode.
Lorenzopapi99 said:
Floppy kernel is supported by spectrum, you can download it from play store, and in the app there are 4 different mode.
Click to expand...
Click to collapse
I use balance profile,your problem not spectrum or anything,your problem dirty install and stability,you use clean install try and look performance
ByBlaCk said:
I use balance profile,your problem not spectrum or anything,your problem dirty install and stability,you use clean install try and look performance
Click to expand...
Click to collapse
I have done a clean install
Sir so u use spectrum in balance mode? And can i know what is the performance in pubg? Do u experience some framedrops?
Asapakyou01 said:
Sir so u use spectrum in balance mode? And can i know what is the performance in pubg? Do u experience some framedrops?
Click to expand...
Click to collapse
In balance mode PUBG is ok, there aren't framedrop, and the smartphone doesn't heat so much
Why mine theres always a minor framedrops. Sadly i feel its too unfair.
Asapakyou01 said:
Why mine theres always a minor framedrops. Sadly i feel its too unfair.
Click to expand...
Click to collapse
Update the gpu driver, now in antutu I have done 165k, and also PUBG is much better
I'm installing your mod (v2), but in magisk, your mod still (v1), this is bugs?
yoshidaharu said:
I'm installing your mod (v2), but in magisk, your mod still (v1), this is bugs?
Click to expand...
Click to collapse
sorry,it is my fault,i forget edit module.prop inside rename versiyon,it is v2 but looking magisk v1
Can i use this mod on miui10 8.8.30 developer and stock kernel with root by replace v2 thermal file ?
Based on a217f
Version 2 is here
physwizz a21s kernel version 1.5
Based on a217f Version 2 is here https://forum.xda-developers.com/t/physwizz-a21s-kernel-version-1-5.4359957/page-3#post-86991813 For OneUI 3.1 v1.5 (May also work for GSIs) Samsung securities disabled More CPU governors Conservative...
forum.xda-developers.com
For OneUI 3.1 v1.5
(May also work for GSIs)
Samsung securities disabled
More CPU governors
Conservative, On-demand, Userspace, powersave, performance, energy_step, shedutil
Optimised for performance
Overclocked for performance
Underclocked for battery
CPU: 130MHz - 2210MHz
lz4 compression added to zram
Preparation
Install adb tools on pc
allow from unknown sources on phone developer settings
Installation
Connect phone to PC
Copy zip file to adb folder on pc
Open terminal on pc
Navigate to adb folder
Type
adb sideload **.zip
reboot
Go to settings, about phone, software information
For Zram
Go to HKtweaks- virtual memory
Turn off zram
increase swappiness to 200
choose lz4
increase size to 4096
turn on Zram
Magisk modules in post #2
Kernel source code
physwizz - Repositories
physwizz has 172 repositories available. Follow their code on GitHub.
github.com
@physwizz
I also have 2 Magisk modules to go with my kernel.
physwizz debloat module v2
(Added a70 changes)
With physwizz-2 app
Magisk module to debloat any Samsung phone to remove all the apps that slow down the phone
To debloat:
Install the module from Magisk and reboot.
To rebloat:
delete the module in Magisk and reboot
wizzROM Creator module v2
for all Samsung a-series phones
Turn any stock or custom OneUI into a QwizzROM or RwizzROM
OneUI 2.0 will become QwizzROM
OneUI 3.1 will become RwizzROM
Debloated ROM with Extras
Extras:
Battery charge limit
Clean Master
ES file explorer
HKtweaks
SimpleReboot
Root Explorer
Zarchiver
physwizz-2
Make sure your OneUI ROM iis running befote you start
Installation
1 Backup system from recovery
2 Install the creator from Magisk
3 Reboot
4 Enjoy
Name your wizzROM (optional)
1. Use a root explorer to copy and paste system/build.prop to new location
2. Edit build.prop like this
ro.build.display.id=<your-name>
3. Use zarchiver to paste the new build.prop into the system folder inside wizzROM-creator.zip
4. Install wizzROM-creator.zip
@physwizz
sideload in lineage recovery ?
also do we need flash dm veriety thing?
can you provide details more specific if you dont mind....
what recovery do we need
NuzzaimStark said:
sideload in lineage recovery ?
also do we need flash dm veriety thing?
can you provide details more specific if you dont mind....
what recovery do we need
Click to expand...
Click to collapse
You don't need dmverity. It is only for preventing encrypted data.
As far as i know you don't need lineage recovery but I'll confirm with my testers.
I have a127f and I have twrp
NuzzaimStark said:
sideload in lineage recovery ?
also do we need flash dm veriety thing?
can you provide details more specific if you dont mind....
what recovery do we need
Click to expand...
Click to collapse
Check the new instructions
what recovery do we need
physwizz said:
Check the new instructions
Click to expand...
Click to collapse
Thumbs up for the work
Working on mine
A217F/DS
Lineage Os 18.1
Rooted
Can you do something on gpu ?..
There is some fps gain..by the way and I like this kernel..
Now I can jump in bootcamp..in PUBG/BGMI
In Duo
NuzzaimStark said:
what recovery do we need
Thumbs up for the work
Working on mine
A217F/DS
Lineage Os 18.1
Rooted
Can you do something on gpu ?..
There is some fps gain..by the way and I like this kernel..
Now I can jump in bootcamp..in PUBG/BGMI
In Duo
Click to expand...
Click to collapse
When I work out how to do the GPU in my a127f I'll also do it on you a21s.
A21s (New)
A21s (SM-A217F/M) discussion and development
t.me
works for sm-a217m
Ganzl 29482 said:
works for sm-a217m
Click to expand...
Click to collapse
Yes?
physwizz said:
You don't need dmverity. It is only for preventing encrypted data.
As far as i know you don't need lineage recovery but I'll confirm with my testers.
I have a127f and I have twrp
Click to expand...
Click to collapse
what version of twrp are you using with the a21f? and where do i get it? and it works fine?
[email protected] said:
what version of twrp are you using with the a21f? and where do i get it? and it works fine?
Click to expand...
Click to collapse
I don't have a217f.
I have a127f.
TWRP for a217f is being developed here https://t.me/joinchat/19IDHssAXUxjZTI1
physwizz said:
I don't have a217f.
I have a127f.
TWRP for a217f is being developed here https://t.me/joinchat/19IDHssAXUxjZTI1
Click to expand...
Click to collapse
Okay thanks yes n meant to say a217f. Im looking for a working TWRP for sm-a217f
[email protected] said:
Okay thanks yes n meant to say a217f. Im looking for a working TWRP for sm-a217f
Click to expand...
Click to collapse
Yes,
It's now working for a217f
physwizz said:
Yes?
Click to expand...
Click to collapse
Yes, it's working on SM-a217M, thank you so much for your effort .
But I encountered a problem, every time I boot up the phone, this message shows up (I can't print): "There's an internal problem with your device. Contact your manufacturer for details."
Also, can you fix the CPU clock to 2.21Ghz for a217M? Or enable it to modifying up to 1.58Ghz? Because my phone always keeps it at 1.58GHz or sometimes at 1.84Ghz, rarely at 2.21Ghz, and it does not increase more than that (1.58Ghz) manually using HKtweaks or 3C CPU or whatever overclocking app. I can only change the governors or decrease the clock. Thank you
AvanGLiT said:
Yes, it's working on SM-a217M, thank you so much for your effort .
But I encountered a problem, every time I boot up the phone, this message shows up (I can't print): "There's an internal problem with your device. Contact your manufacturer for details."
Also, can you fix the CPU clock to 2.21Ghz for a217M? Or enable it to modifying up to 1.58Ghz? Because my phone always keeps it at 1.58GHz or sometimes at 1.84Ghz, rarely at 2.21Ghz, and it does not increase more than that (1.58Ghz) manually using HKtweaks or 3C CPU or whatever overclocking app. I can only change the governors or decrease the clock. Thank you
Click to expand...
Click to collapse
1. that error message is normal.
2. To force it up to the highest you have to use Hktweaks to set the minimum values to maximum.
I have a127f .
My benchmarks are below
physwizz said:
1. that error message is normal.
2. To force it up to the highest you have to use Hktweaks to set the minimum values to maximum.
I have a127f .
My benchmarks are below
Click to expand...
Click to collapse
Thank you, I tried that but unfortunately did not work, the cpu always drops keeping at 1.58Ghz or 1.84Ghz.
But I found that changing some values from config_chipset.json and config_vendor.json files at "/vendor/etc" to 100%, it keeps the CPU stable at 2,21Ghz as well the GPU.
This file schedules performance for some apps and 'occasions', like if I scroll down photos from Galery the CPU drops to 1.4Ghz, and if I close, the CPU goes back to 1.58Ghz. So that was the problem. Changing some values to 100% fixed that, now I'm able to control the clock normally.
tell me how do you change which app?
NuzzaimStark said:
tell me how do you change which app?
Click to expand...
Click to collapse
Root Explorer with its own text editor. I just changed the "Value" : "xxx" to "Value" : "100%" of CPUMinFreq, CPUMaxFreq and GPUMinFreq.
For example: the "Hint": "GALLERY_SCROLL", changes/drops the frequency of CPU and GPU when you scroll your pictures down or up, if you change to 100% of each value, the frequencies will not drop. So you will expect more performance scrolling your pictures.
AvanGLiT said:
Root Explorer with its own text editor. I just changed the "Value" : "xxx" to "Value" : "100%" of CPUMinFreq, CPUMaxFreq and GPUMinFreq.
For example: the "Hint": "GALLERY_SCROLL", changes/drops the frequency of CPU and GPU when you scroll your pictures down or up, if you change to 100% of each value, the frequencies will not drop. So you will expect more performance scrolling your pictures.
Click to expand...
Click to collapse
Can you run a benchmark on geekbench 5?
Made a new kernel forked from the stock nameless kernel and I got really good benchmark scores. For banking apps download universal safety fix and then hide all your banking apps and your apps that don't work with root this kernel comes with root but when you get into magisk manager you can unroot your device I WILL NOT BE RESPONSIBLE FOR A BRICKED PHONE! if you say anything like "THIS GUY FRICKED MY PHONE" i will laugh at you Source code: https://github.com/Gavin123-code/kernel_oneplus_sm8250 Credits The Nameless-AOSP team and The Illusion-X Devs. happy flashing!
GbnrVR said:
Made a new kernel forked from the stock nameless kernel and I got really good benchmark scores
Click to expand...
Click to collapse
Overclocked to 4250Mhz and I got good battery life like 16 hours (THIS US ONLY TESTED ON NAMELESS) it should work on other roms but just saying and ANDROID 12 only I'll try to keep it updated with nameless updates but updates will stop when they switch kernel if they do. CREDITS: Nameless AOSP Maintainer For the 8T and the IllusionX team
GbnrVR said:
Overclocked to 4250Mhz and I got good battery life like 16 hours (THIS US ONLY TESTED ON NAMELESS) it should work on other roms but just saying and ANDROID 12 only I'll try to keep it updated with nameless updates but updates will stop when they switch kernel if they do. CREDITS: Nameless AOSP Maintainer For the 8T and the IllusionX team
Click to expand...
Click to collapse
Download
96 MB file on MEGA
mega.nz
I AM NOT RESPONSIBLE FOR A BRICKED DEVICE
Will this fix for the qualcomm crash dump problem I understand the original version seem to have problems with?
badadam said:
Will this fix for the qualcomm crash dump problem I understand the original version seem to have problems with?
Click to expand...
Click to collapse
I don't know I haven't experienced those problems
You can try
GbnrVR said:
You can try
Click to expand...
Click to collapse
Also this is incompatible with the OnePlus 9R
GbnrVR said:
You can try
Click to expand...
Click to collapse
OK, I´ll give it a try and see how it goes.
Flashed it and now my banking apps are not working. Detected as rooted....
badadam said:
Flashed it and now my banking apps are not working. Detected as rooted....
Click to expand...
Click to collapse
Use universal safety net fix and hide the banking apps
GbnrVR said:
Use universal safety net fix and hide the banking apps
Click to expand...
Click to collapse
I´m not rooted so I´ll just see if a dirty flash can bring it back.
badadam said:
I´m not rooted so I´ll just see if a dirty flash can bring it back.
Click to expand...
Click to collapse
I thought you said detected as rooted because this kernel is prerooted and with magisk Manager you can unroot
You need to post your source. Also you should really provide more info in the OP, especially since it's already patched with magisk supposedly...
Thanks for the build .
Can you post the source please ?
Have you modified illusion X ? If so what features?
Would be great to have more cpu governor's / TCP algorithms and I/O schedulers . As well as under clocking CPU and GPU
Looking forward to upcoming releases .
UPDATE ** Experiencing extreme lag when switching between apps .
GPU has -44mhz - 800mhz clock speeds , perhaps -44hz is the issue?
Your on the right track , great to see fresh kernel ( fork )
azoller1 said:
You need to post your source. Also you should really provide more info in the OP, especially since it's already patched with magisk supposedly...
Click to expand...
Click to collapse
Fun fact this comes from nameless so you can look at the nameless kernel sources
GbnrVR said:
Fun fact this comes from nameless so you can look at the nameless kernel sources
Click to expand...
Click to collapse
Oh I get what you mean since it's like overclocked and stuff
hightech316 said:
Thanks for the build .
Can you post the source please ?
Have you modified illusion X ? If so what features?
Would be great to have more cpu governor's / TCP algorithms and I/O schedulers . As well as under clocking CPU and GPU
Looking forward to upcoming releases .
UPDATE ** Experiencing extreme lag when switching between apps .
GPU has -44mhz - 800mhz clock speeds , perhaps -44hz is the issue?
Your on the right track , great to see fresh kernel ( fo
Click to expand...
Click to collapse
hightech316 said:
Thanks for the build .
Can you post the source please ?
Have you modified illusion X ? If so what features?
Would be great to have more cpu governor's / TCP algorithms and I/O schedulers . As well as under clocking CPU and GPU
Looking forward to upcoming releases .
UPDATE ** Experiencing extreme lag when switching between apps .
GPU has -44mhz - 800mhz clock speeds , perhaps -44hz is the issue?
Your on the right track , great to see fresh kernel ( fork )
Click to expand...
Click to collapse
Modded IllX And -44Mhz is a glitch because somehow android cant handle so 4250Mhz also thank you for the nice messages ill figure out how to get the sources so i hope XDA doesnt delete this
GbnrVR said:
Modded IllX And -44Mhz is a glitch because somehow android cant handle so 4250Mhz also thank you for the nice messages ill figure out how to get the sources so i hope XDA doesnt delete this
Click to expand...
Click to collapse
also question can anyone help me decompile a kernel im on windows and i am stuck