Database Develop

Move from fake rom to official rom?

Hi everyone. Im really new to Xiaomi devices. So here is my problem. I bought MI 5 with fake rom, it is common in my country. The rom version is 7.2.8.0.0(MAACNDB).
How to move from that fake rom to official? Does EDL mode still works for that rom version? Because I read somewhere that EDL is no longer work since 7.3.x.x and later.
I tried to flash MIUI 8 global from updater and it failed, after booted the rom remain the same. I also tried using MI PC Suite, when I hold shift and flash button (in chinese of course ) but it shows dialog reboot or fastboot.
Any help would be appreciate,, thanks

I just tried using EDL method and it worked in my case. Thanks everyone, even there's no comment yet . Now im ready to rock!

Mi5 bricked ... no LED / no Recovery / no Fastboot / no signs of Life !!!

Hi friends, since today my phone is bricked.
I cant get into recovery/fastboot mode. No LED even when i connect it to charging.
My phone gets detected on MiFlash and i have successfully flashed the developer ROM but even then my Phone refuses to boot. What could be the problem ? i tried almost all the Guides on Internet. i dont know what happened. I had ResurrectionRemix 7.1.1. till yesterday working without any problem. Today all of a sudden i am facing this issue. i wanted to flash Brand Kernel but i just downloaded and didnt flash it. after that this horrible experience of HardBrick.
Anyone help me pls what can be done / i am on Windows 7 64bit and i tried on only one laptop. As i said earlier, i have no problem in flashing latest global developer ROM(Fastboot ROM) using MiFlash. but it doesnt reboot, no LED, no Recovery no Fastboot. i am quite irritated with this. such an issue i never had with any other Android phone(HTC Desire, Samsung galaxy SII, Xiaomi Mi2S), but now with Mi5...
Am i Unlucky ? have i turned my new Mi5 into a costly Paperweight ? i bought it on geekbuying during special Offer... just an info...
I am waiting for an helping hand... pls help me friends....

Try test point method, it's revived my hardbrick mi5.
Just google the tutorial. It's quite easy.
But it's void the warranty because of the broken seal

What is that ? I couldn't figure it and I couldn't find it on Google. Can u give a simple guide or a link to it pls ? Thanks in advance

[https://m.youtube.com/watch?v=ED96PJ-qYMM] [Unbrick Xiaomi Mi5 - Repair Boot Xiaomi Mi5 hardbrick PC not detected ! | ChoiMobile.VN - YouTube]

Check it out { Lock bootloader Method }
http://en.miui.com/thread-299790-1-1.html

Avoid stupid test point stuff. All you need to do is disconect the battery and reconnect it back again.

Read this
https://forum.xda-developers.com/mi-5/help/bricked-mi5-t3528810
Same problem..and solved

Hi I don't understand which method to follow... is global Rom 7.2.4 stable or dev Rom?
Also miflash is latest stable or beta ?
I am waiting

Spevky said:
Avoid stupid test point stuff. All you need to do is disconect the battery and reconnect it back again.
Click to expand...
Click to collapse
how do i do it ? pls explain to me in detail. Thanks in advance

plikmuny said:
how do i do it ? pls explain to me in detail. Thanks in advance
Click to expand...
Click to collapse
Just watch a tutorial on how to dissasemble the mi5

bootloop, locked bootloader, flashing with testpoint doesn't work

Hello guys,
like many other people my Xiaomi A2 phone don't want to boot anymore. Everytime i tryied to start, it got stuck at Android One screen an reboots. I've tried every powerbutton/vol-button combination i could found but nothing worked, only fastboot mode was possible. I red very much here and in other forums. Because my bootloader is locked, I opened my phone to flash it with the testpoint method. I tried different versions of the mi-flash-tool between 2015 and 2018 and also tried various rom versions between V9.6.13 and V10.0.13 but nothing worked. Mostly the process fails with the Error "ACK Count don't match". Especially with newer versions of the mi flash tool.
I have the global version of the phone and never flashed any other rom before the phone got bricked.
The drivers I use are from the mi community forum (can't post link because i'm new. Title is: [All in One] MIUI Flashing Guide: Unbrick, EDL Method / Locked Bootloader, Unlock Bootloader, More)
I also tried different USB Ports.
It would be really great if you could help me with any other idea or tip!

where you from? do you have telegram? i was in dsame situation last night but i manage to make it work doing testpoint method.

Go Service Center Your Problem Solve Because I Face Same Problem And Know I Save My Mi A2 Life

Hello. Did you manage to solve the problem?
I have the same situation.

I don't know if this is the same situation as you guys, but I managed to successfully flash my MI 6x with wayne v 10.3. Even then the phone always starts in a bootloop. I'm beginning to suspect this is a hardware problem.

I faced a similar issue. Have you managed to solve it? I also have the same error and can't flash "ack count don't match"

Question Xiaomi MI 11 problems with gyroscope, accelerometer and magnetic sensor

Hi,
I've bought a used MI 11 (8gb/256gb) phone. Did not pay attention during buying, so the issue might be present from the beginning: the gyroscope, accelerometer and magnetic sensors are not working. Steps I've already took:
- I've entered into CIT and I've went to calibration: they all fail. More precisely I open the e.g. gyroscope and then wait and nothing happens. Same with the other two sensors. Camera calibration also fails, I assume bc of one of this sensor is not working.
- I've already flashed persist.img via TWRP (i know, I have lost L1, so DON'T DO IT!) and that did not help.
- Tried fastboot / twrp flashing different roms (xiaomi.eu, xiaomi global, xiaomi chinese, xiaomi europe).
Is there anything I can do here? Is it possible that these 3 sensors are all physically broken? Are they actually just one sensor?
thanks!

please don´t use twrp flash tgz file original workaround link
https://c.mi.com/oc/miuidownload/detail?guide=2
don´t close BL

Firedance1961 said:
please don´t use twrp flash tgz file original workaround link
https://c.mi.com/oc/miuidownload/detail?guide=2
don´t close BL
Click to expand...
Click to collapse
I'm not sure how is this related to my problem in any sense, but thanks, I am not planning to close BL.

the standard of the stock tool is to close your BL

Firedance1961 said:
the standard of the stock tool is to close your BL
Click to expand...
Click to collapse
I understand, but not the opening/closing the BL is my problem. Sensors are not working

iknow its a tipp with the bl, flash a tgz file then your problem with sensor are end, the tgz file make your system complett new it is better than flash a recovery rom the different is more than 1gb of partiion repair

Firedance1961 said:
iknow its a tipp with the bl, flash a tgz file then your problem with sensor are end, the tgz file make your system complett new it is better than flash a recovery rom the different is more than 1gb of partiion repair
Click to expand...
Click to collapse
OP: "Tried fastboot"

gezabela said:
Hi,
I've bought a used MI 11 (8gb/256gb) phone. Did not pay attention during buying, so the issue might be present from the beginning: the gyroscope, accelerometer and magnetic sensors are not working. Steps I've already took:
- I've entered into CIT and I've went to calibration: they all fail. More precisely I open the e.g. gyroscope and then wait and nothing happens. Same with the other two sensors. Camera calibration also fails, I assume bc of one of this sensor is not working.
- I've already flashed persist.img via TWRP (i know, I have lost L1, so DON'T DO IT!) and that did not help.
- Tried fastboot / twrp flashing different roms (xiaomi.eu, xiaomi global, xiaomi chinese, xiaomi europe).
Is there anything I can do here? Is it possible that these 3 sensors are all physically broken? Are they actually just one sensor?
thanks!
Click to expand...
Click to collapse
Hi. Do you found the solutions? I hv same problem..

Sha17 said:
Hi. Do you found the solutions? I hv same problem..
Click to expand...
Click to collapse
nope

Persist partition was damaged. Classic problem. Reflash it.
But you loose wideline certificate. I warn you. (Wideline=Netflix in hd)

Flash a original rom with flashtool from Xiaomi without locking bootloader .

dromaczek said:
Persist partition was damaged. Classic problem. Reflash it.
But you loose wideline certificate. I warn you. (Wideline=Netflix in hd)
Click to expand...
Click to collapse
Play read the OP... (tldr: did all of those, but i found peace with loosing L1)

Question Redmi note 10 Pro not flashing, not booting

Long story short, my gf Redmi Note 10 Pro somehow got to MIUI Recovery menu and 3rd party service managed to erase recovery and everything from the phone and gave back the fresh looking brick stuck on Fastboot!!!
I have successfully flashed EEU Sweet ROM (Europe (EEA) latest Fastboot ROM MIUI V12.5.6.0.RKFEUXM) on the Global version though and after that it comes to recovery menu but it shows in red "NV data is corrupted" now I am clueless what to do next. Desperate me tried to flash Global latest Fastboot ROM MIUI V12.5.9.0.RKFMIXM but it gives Anti Rollback error so based on info here https://www.xda-developers.com/xiao...78.2028059671.1642858063-854958160.1642858063 I have checked the Anti_version.txt of the current ROM and the one I try to install and both is on 3 so based on the info I should be able to flash to the same number but it wasn't successful so I tried to edit Flash_all.Bat file and remove the ARB check commands but even after that I still get the ABR error. What should I do? Am I taking a wrong path in solving the issue? Would flashing it again solve the "NV data is corrupted" issue?

I dunno if this helps, but I was stuck in Fastboot as well at some time. Nothing helped, not even flashing through fastboot. The only tool that helped me was the Xiaomi Tool V2 https://www.xiaomitool.com/V2/ here. No ad or something but this really helped alot without problems.
Other possible problem by another user: https://forum.xda-developers.com/t/redmi-note-10-pro-sweet-nv-is-corrupted-fixed.4345659/
Maybe you installed the wrong rom?

romuser87 said:
I dunno if this helps, but I was stuck in Fastboot as well at some time. Nothing helped, not even flashing through fastboot. The only tool that helped me was the Xiaomi Tool V2 https://www.xiaomitool.com/V2/ here. No ad or something but this really helped alot without problems.
Other possible problem by another user: https://forum.xda-developers.com/t/redmi-note-10-pro-sweet-nv-is-corrupted-fixed.4345659/
Maybe you installed the wrong rom?
Click to expand...
Click to collapse
Thanks, DLin the tool you mentioned atm but yes I did dl a EU version on global which I read it is no issue as long as it is not on Chinese version. It all started suddenly, out of nowhere the phone rebooted on Fastboot so it was taken to a 3rd party service and their they tried to fix it by wiping the phone to an unrecoverable state and said this is a new model so the files are not yet published you better take it to an authorized service!!!Oh I am mad! I'll report after trying the tool. Btw the other solution you mentioned was the 1st thing I tried but the file in 1st step is removed from the hosting server and someone asked the thread creator to reupload but no reply yet :/

Asgharjoon said:
Thanks, DLin the tool you mentioned atm but yes I did dl a EU version on global which I read it is no issue as long as it is not on Chinese version. It all started suddenly, out of nowhere the phone rebooted on Fastboot so it was taken to a 3rd party service and their they tried to fix it by wiping the phone to an unrecoverable state and said this is a new model so the files are not yet published you better take it to an authorized service!!!Oh I am mad! I'll report after trying the tool. Btw the other solution you mentioned was the 1st thing I tried but the file in 1st step is removed from the hosting server and someone asked the thread creator to reupload but no reply yet :/
Click to expand...
Click to collapse
Ok so now I tried with the tool and interestingly I had to make choices which were not easy and obvious anyhow, it didn't work
It gives the below error and seems to be called "sideload" status issue. But the phone now still reboots on Main Menu with the same old "NV data is corrupted"

romuser87 said:
I dunno if this helps, but I was stuck in Fastboot as well at some time. Nothing helped, not even flashing through fastboot. The only tool that helped me was the Xiaomi Tool V2 https://www.xiaomitool.com/V2/ here. No ad or something but this really helped alot without problems.
Other possible problem by another user: https://forum.xda-developers.com/t/redmi-note-10-pro-sweet-nv-is-corrupted-fixed.4345659/
Maybe you installed the wrong rom?
Click to expand...
Click to collapse
I could finally flash the latest Global version but the error persists. Accidentally I did flash the phone with clean all and lock ticked Now I cannot even flash anything as bootloader is locked! How can I fix it help please

Here is the wrong selection on MI Flash! Is there anyway to get it unlocked?