I am seriously considering returning this bad boy. It sucks because it's a great device. But so many friends & family have newer iPhones so I can't answer their calls. Also no VoWifi is a killer for me. I'm so torn, because OP knocked it out of the park with this one.
Sent from my GM1917 using Tapatalk
skinnytoo2 said:
I am seriously considering returning this bad boy. It sucks because it's a great device. But so many friends & family have newer iPhones so I can't answer their calls. Also no VoWifi is a killer for me. I'm so torn, because OP knocked it out of the park with this one.
Click to expand...
Click to collapse
why cant u answer call feom iphone
my dauther have iphone xr an i have no problems answer her call
-fluffy- said:
why cant u answer call feom iphone
my dauther have iphone xr an i have no problems answer her call
Click to expand...
Click to collapse
You haven't seen these reports? https://www.droid-life.com/2019/05/...s-7-pro-owners-seeing-dropped-calls-no-texts/
No issues wtih Verizon here!
Uhhh... Dual SIM Fi/Verizon here, no issues with calls or voicemail.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Verizon has always been a pain in the ass if you just swap SIMs. Call them. Register it. :good:
Get a new carrier.
All the other carriers service are inferior in my area.
Sent from my GM1917 using Tapatalk
You must call Verizon and give them the Imei. A standard Sim swap will not make this phone work for certain aspects on Verizon. When they do the Sim swap they turn off CDMA for your line which makes it actually work.
No SIM swap is needed for VZW. You just have to tell them you have a certified phone that needs to be set up as "CDMA-less". If you had a 6t on VZW, you already have that.
OnePlus is aware of the issues with HD calling set on the newer iPhones so it will be a software fix.
All that said, the 7 Pro is not officially certified by VZW as the 6T was.
The only annoying bug for me is the caller ID in the dialer showing restricted
Sent from my GM1917 using Tapatalk
tanman21 said:
You must call Verizon and give them the Imei. A standard Sim swap will not make this phone work for certain aspects on Verizon. When they do the Sim swap they turn off CDMA for your line which makes it actually work.
Click to expand...
Click to collapse
I call BS on this. I tried online and said my current sim that was in my S10+ was bad would not allow for a transfer. I swapped sim to 7 pro and no issues with calls/texts/data etc etc works flawlessly
Sent from my GM1917 using Tapatalk
You can believe whatever you want I am just trying to help you. That’s exactly what it does for me the system is not designed for an online device swap to a CDMA-less device. They can definitely do it for you through chat as well. But hey if you want to keep having problems enjoy .
Only thing I had to do was have them enable CDMA-less back when I switched to the McLaren 6T from the Pixel 2 XL. Pulled that same SIM out of that phone and popped it in this and have only noticed the RESTRICTED caller ID thing today. No issues with texts or anything else.
Swapped my wife's SIM from HTC 10 straight into her 7Pro. Everything but incoming texts worked. Went online and ran through the "ad a new phone to existing line" tool and all works great on VZW; her backlog of texts came streaming in (wifi calling/texting aside)
Don't need to actually talk to anyone. All online for me.
Make sure you call Verizon and have them add CMDA-less Roam onto your line. You will not get proper service otherwise. I had a OnePlus 6t on verizon with zero issues. You might need to call more than one time to find a rep that knows what you are talking about. Just tell them there is a feature that needs to be added to your line and it is called CDMA-less Roam. Source: I used to work at Verizon
You don't even have to call, you can do it directly through the website. Registering the IMEI fixed all those problems and took about 2 minutes.
New update out there to download and install manually, works great I'm on Verizon and it fixed the iPhone incoming call issue!!
https://forum.xda-developers.com/oneplus-7-pro/help/verizon-to-verizon-incoming-calls-t3932394/page8
mdonnelly1127 said:
New update out there to download and install manually, works great I'm on Verizon and it fixed the iPhone incoming call issue!!
https://forum.xda-developers.com/oneplus-7-pro/help/verizon-to-verizon-incoming-calls-t3932394/page8
Click to expand...
Click to collapse
Can confirm that this works perfectly. Only issue I have now with VZW is the no wifi calling. Came from a pixel 2xl, and this phone is night and day better. My data speeds are even much much faster now as well.
Sent from my GM1917 using Tapatalk
[/ it appears that 9.5.8 fixes the caller ID issue on Verizon
Related
Took the sim out of my Verizon s4 and was determined to get this N5 up and running on big red.
I have full lte after a lot of tweaks that I probably shouldn't post right now do to what it could possibly do to a phone.
If you are a Dev and think you can do more with this let me know and I'll get you to where I'm at. I'm just a themer with basic dev knowledge. As you can see there is no signal to text or call. I've had bars a few times but that's it. As you see I'm on L. I had to crop one screen on phone because of upload size restrictions.
Youtube video Screencast:
http://youtu.be/gsqtxGojofM
Screens:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Looks interesting so far. I can't recall whether this device supports VZW's frequencies. If not, calls may never work.
I'll assume you modified the APN for VZW. Did you try modifying the radio?
If you post what you did to get data working, other members may have some additional suggestions to get you moving again.
its been gotten to, the lte connecting. but it's the calling ability that cant be done. i dont remember what all really came about, but i do remember thst the calling ability is the real issue. the nexus 5 doesnt have the ability to make phonecalls via lte. if you search the forums here, maybe you can find the thread.
simms22 said:
its been gotten to, the lte connecting. but it's the calling ability that cant be done. i dont remember what all really came about, but i do remember thst the calling ability is the real issue. the nexus 5 doesnt have the ability to make phonecalls via lte. if you search the forums here, maybe you can find the thread.
Click to expand...
Click to collapse
I'm no expert but I don't see why it can't. With some kind of modification to radio or whatever.
St3rdroids said:
I'm no expert but I don't see why it can't. With some kind of modification to radio or whatever.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=47378482&postcount=18
simms22 said:
http://forum.xda-developers.com/showpost.php?p=47378482&postcount=18
Click to expand...
Click to collapse
Explains why I get signal and it goes away. I happen to have an active imei on Verizon I'll check it out.
geez, if you could get me to that point it be so sweet.
coolguy71261 said:
geez, if you could get me to that point it be so sweet.
Click to expand...
Click to collapse
Calls won't work for two reasons 1) I don't think Verizon uses VoLTE yet, and 2) calls still use 1x, just like Sprint, and you have to have the MEID (IMEI minus last digit I believe) in Verizon's database. Technically it should work on Page Plus and I think I saw a thread here on how to flash it for PP. I'm kind of surprised Verizon LTE works as most of the bands for Verizon's LTE don't coincide with the N5 IIRC. I could be wrong about that though. Also it's probably like any other GSM carrier, once you activate the SIM card in a carrier based phone, you can stick it in another phone and it should just activate. The only reason you have to change IMEIs is for the EVDO/1x backwards compatibility.
MrObvious said:
Calls won't work for two reasons 1) I don't think Verizon uses VoLTE yet, and 2) calls still use 1x, just like Sprint, and you have to have the MEID (IMEI minus last digit I believe) in Verizon's database. Technically it should work on Page Plus and I think I saw a thread here on how to flash it for PP. I'm kind of surprised Verizon LTE works as most of the bands for Verizon's LTE don't coincide with the N5 IIRC. I could be wrong about that though. Also it's probably like any other GSM carrier, once you activate the SIM card in a carrier based phone, you can stick it in another phone and it should just activate. The only reason you have to change IMEIs is for the EVDO/1x backwards compatibility.
Click to expand...
Click to collapse
Volte should be working by q2015 everywhere
coolguy71261 said:
Volte should be working by q2015 everywhere
Click to expand...
Click to collapse
Hmm, we'll see how it works then.
MrObvious said:
Hmm, we'll see how it works then.
Click to expand...
Click to collapse
i may return to big red, im currently testing out net 10
Posted a video of me getting data after a fresh wipe and install of L.
http://www.droid-life.com/2014/08/26/verizon-volte-hd-voice-launch/
I really need to remember to watch OP's video when I get home. This is very exciting. So to get data, you had to activate a Verizon device and swap SIMs, right? After that, the only thing not working is the CDMA voice? So in theory, if the above poser's link is correct (Verizon rolling out VoLTE soon) I could actually switch to them?
It's Verizon so I probably wouldn't do it permanently, but it would be cool to try for a month, if for nothing more than a proof of concept or neat trick. Hope Verizon does that soon.
This just won't work bro, not on CDMA.
I worked for Sprint and their system is the same.
The SIM card is strictly for LTE, everything else goes over the CDMA network, which requires server authentication.
Even when VoLTE will roll out, that authentication will remain in place.
People have got data in the past. Its voice that's the issue.
Sent from my Nexus 5 using Tapatalk
he can get voice & sms on it, though not via the sim card number;
I replied to the video with -
"..though it won't be your Verizon mobile number;
you could try using ring.to / grooveIP for voice / sms via the lte connection..
I use that as a back up number on sprint, mostly for lte , wifi , evdo routed calls,
even gsm / hspa+ & wifi when sim swapped out of the country on my nexus 5.
after editing the echo settings, it should work wonders thru that Verizon lte connection.."
rootSU said:
People have got data in the past. Its voice that's the issue.
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
just thought of something, real simple..
the cdma radio authentication is what's stopping the nexus 5 from being on Verizon,
but... **does the lte band need the same authentication**?
let's just say, on my nexus 5, with the new google voice hangouts / sprint number integration,
i go through the dialer into settings to toggle **lte only** which disables the cdma radio,
pop in a Verizon unlimited data sim, in an area with verizon's band 4..
over the top, voip service on lte..?
~shrugz shoulderz~
Unsure what's going on here, but Three have historically never enabled WiFi Calling for phones they haven't personally sold, even if they do actually sell it (except iPhones) however I've noticed my unlocked (Vodafone contract) P20 Pro allowing it. Anyone else noticed this?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
My Mate 10 Pro had it, but I can't see it on my P20 Pro. I'll check when I get home tonight
lp77 said:
My Mate 10 Pro had it, but I can't see it on my P20 Pro. I'll check when I get home tonight
Click to expand...
Click to collapse
Yeah seems strange that it's activated though, although one thing I have noticed and don't know how they managed it, but the phone 'seems' Three branded with the app Three Likes and also giving a 3 Boot Screen on power up. I wonder if it's because it was the first carrier SIM i had in to boot with.
Oh yeah, it definitely does that.
Seems to brand itself with Three, which is pretty clever (again, mate 10 pro did that)
If you put in a different (non-3) simcard to avoid the branding, would Wifi-Calling still work if you then put in the 3 sim?
robot1000 said:
If you put in a different (non-3) simcard to avoid the branding, would Wifi-Calling still work if you then put in the 3 sim?
Click to expand...
Click to collapse
very good question, am putting in a O2 sim first
It seem Huawei started group all UK network customise setting into one. My Mate 10 Pro from Asia (C636) can use both VoLTE & VoWifi on Three UK & EE Sim with if no issue
iantaylor27 said:
very good question, am putting in a O2 sim first
Click to expand...
Click to collapse
Did you get O2 branding?
Has anyone tried using 3 Wifi calling after using another simcard when initially setting up the phone
I have noticed when wifi calling is enabled, when i launch whatapp video call or voice, the other party cant hear me until i disable it
Works with my 3 sim card from my other contract.
Sent from my CLT-L29 using Tapatalk
orangecroc said:
Works with my 3 sim card from my other contract.
Sent from my CLT-L29 using Tapatalk
Click to expand...
Click to collapse
which sim did you insert first? when you installed the 3 sim card did the phone rebrand to 3 and install any apps
what release is system on
I inserted my old 3 sim before the new 3 one that came with the phone.
The phone is 3 branded but I believe they supply it carrier unlocked.
Sent from my CLT-L29 using Tapatalk
They are carrier unlocked, but still get rebranded
Sent from my Huawei P20 Pro (CLT-L29) using Tapatalk
Just curious as to what happens if it gets branded with another network first and then if 3 WIFI calling then works
robot1000 said:
Just curious as to what happens if it gets branded with another network first and then if 3 WIFI calling then works
Click to expand...
Click to collapse
same here as may then be the need to rebrand phone and start again if it still works
walkerx said:
same here as may then be the need to rebrand phone and start again if it still works
Click to expand...
Click to collapse
There may be a potential problem down the line though, as the networks may release an update blocking WiFi calling from other networks... Not sure I want to take the risk, so may just put up with the splash screen for peace of mind.
So it seems I've managed to avoid the three splashscreen...
I started the phone without a simcard and ran through the initial start up and transferred my apps/data from my old android device to my new phone and then inserted my 3 simcard whilst the phone was on. I then restarted the phone with the 3 simcard remaining in and low and behold it started up with the regular Huawei screen and Wifi calling works!
Only issue though is that I'm on Firmware: CLT-L09 8.1.0.103(C782) and not had the latest update come through
So when I first got my P20 Pro I had VoLTE enabled and working fine but one day I noticed the HD notification was missing the dialer app no longer had the HD call button. Just noticed that when I make a call my device does actually revert back to the 3G network and I can no long "multitask" online while on a call. Of course I've also lost the ability to make video calls.
I've checked the wife S7 and can still make calls over LTE with that one. So now I'm wondering if it is the Bell network or my P20 Pro? A quick check on Bell support site shows a list of devices compatible with their VoLTE, the list shows older devices but newer ones also, P20 Pro not listed. Can't see Bell deactivating VoLTE specifically for this device, or at least I'd hope not.
Anybody else on the Bell network have this happen or is VoLTE working for you? Before I factory reset I wanna know if it's just me.
FYI. Locked and stock
On Virgin as well, just checked. Another kick in the nuts.....
Sent from my CLT-L04 using Tapatalk
Starting to wonder if it was last firmware update 8.1.0.120 (stock). Which you on?
StatikBlue said:
Starting to wonder if it was last firmware update 8.1.0.120 (stock). Which you on?
Click to expand...
Click to collapse
I am on 9.0.0.160
Sent from my CLT-L04 using Tapatalk
Come on, are there no other P20 Pro users in Canada who can take a second to respond and help fellow users?
VoLTE setting is ON. Is it working for you. Do you have HD calls notification on top left, HD dial button in dialer app? When not on wifi does mobile network revert to 3G for phone calls?
Yes/No? Any info would help folks.
Fido told me VoLTE not supported on the P20 Pro and I've certainly never gotten it to work
Working fine on Rogers
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my CLT-L04 using Tapatalk
Notice a couple a days ago for me also on bell network not working.
Also working on rogers
ProAc_Fan said:
Fido told me VoLTE not supported on the P20 Pro and I've certainly never gotten it to work
Click to expand...
Click to collapse
That sucks since Fido is on the Rogers network and looks like it does work for Rogers users.
selfxd said:
Notice a couple a days ago for me also on bell network not working.
Click to expand...
Click to collapse
I'm starting to think the Bell network (Virgin) is the culprit here and not the device (fingers crossed). Curious as to why Bell would pull VoLTE support for the P20 Pro? Hopefully ain't no political thing (lol). Wonder if it's anything to do with Pie update and compatibility. I could say I lost VoLTE on my device almost a month now. I've tried everything in the book on my end even factory reset with no resolve and am more convinced now it's happening on Bell's side on things. Which really sucks cause I hate their support system but need to contact them find out what's going on with my service.
Thanks for the answers folks. Keep them coming.
I am on the Rogers network using an unlocked Bell P20 pro and do not have the VoLTE function so i wonder if it is disabled on Bell hardware?
Cobthaich said:
I am on the Rogers network using an unlocked Bell P20 pro and do not have the VoLTE function so i wonder if it is disabled on Bell hardware?
Click to expand...
Click to collapse
Google about this. Rogers and Fido do the IMEI whitelisting so if you don't buy a device from them you are out of luck
just to inform you guy, I have p20 pro telus(unlocked) I put bell sim and asked bell to enable volte. it works. and it should work on virgin too.
clt-l04 8.1.0.120(c792)
auto_art said:
just to inform you guy, I have p20 pro telus(unlocked) I put bell sim and asked bell to enable volte. it works. and it should work on virgin too.
clt-l04 8.1.0.120(c792)
Click to expand...
Click to collapse
Only Rogers(Fido) blocks you from using their IMS
I've been wondering the same. Got my P20 Pro with Bell a couple of weeks ago. About a week ago, I noticed "HD" at the top left of my notification bar, but it only lasted a few seconds and never returned. After that, I discovered that I'm always connected to LTE, but when I make a call it drops to 3G, and then after the call it reverts back to LTE.
When I insert the Bell SIM into my S7 Edge, it stays connected to LTE at all times.
How is it possible that it showed "HD" very briefly several days ago and never came back? Perhaps Bell was just testing HD on the network for a few minutes? I've always had VoLTE enabled in the settings.
On a somewhat unrelated note, I have two friends with an iPhone 8+, one on Rogers, the other on Bell, and they both drop to 3G when on a call.
Thanks for the info. I will contact them.
Cobthaich said:
Thanks for the info. I will contact them.
Click to expand...
Click to collapse
Please keep us posted!
Just got of the phone with Rogers, the Support specialist tried and also followed up with their network specialist, it is a no go, this was what they said:
"Since the device is not a Rogers device it wont allow VoLTE calls and the VoLTE notification is not being pushed to this IMEI. This gets enabled on the network and since the device is not Rogers it wont allow for it to register. So just make sure when you purchase the phone its from the same carrier as the one you are looking to use as it can cause compatibility issues. All phones get a pre-configured file when they are sent to Carriers and based on the carrier provisioning of the device it becomes compatible to the network."
It looks like some of us are out of luck.
mike613ottawa said:
How is it possible that it showed "HD" very briefly several days ago and never came back? Perhaps Bell was just testing HD on the network for a few minutes? I've always had VoLTE enabled in the settings.
Click to expand...
Click to collapse
I've had this device for about 3 months now and would say it's been about 1 month since I've lost VoLTE service
Just got off the phone with Bell support. Didn't really get anywhere as expected, other then many apologies and an open service ticket to try and find out if it's their end or the P20 Pro. Should hear back within 2 weeks. Again, as expected.
Fido sucks.. might switch to Rogers soon... my work has a ok deal.. $55/mo for 6gb and unlimited calls/text canada wide.
I just got the lte version of the Galaxy watch 3 today. How do I activate it for voice calls and data? I bought it from Samsung.com
Sent from my SM-N975U using Tapatalk
racingmatt1 said:
I just got the lte version of the Galaxy watch 3 today. How do I activate it for voice calls and data? I bought it from Samsung.com
Click to expand...
Click to collapse
I don't know I always get the Wi-Fi watches however let me know how you end up getting your note 20 activated
I tried the BYOB device and it says it cannot be activated. I'll call sprint tomorrow.
Sent from my SM-N975U using Tapatalk
racingmatt1 said:
I tried the BYOB device and it says it cannot be activated. I'll call sprint tomorrow.
Click to expand...
Click to collapse
The watch or the phone? Either way they have to add the IMEI into their system, plan on going to a store
fatboypup said:
The watch or the phone? Either way they have to add the IMEI into their system, plan on going to a store
Click to expand...
Click to collapse
The watch
Sent from my SM-N975U using Tapatalk
Probably best ask this question on the Watch 3 forum:
https://forum.xda-developers.com/smartwatch/samsung-galaxy-watch-3
.
im on tmo and use the LTE frontier. i also have the lte watch 3 coming but thats on 9/09.
i did answer you over at the watch forum, but seems the imei is not yet in the system since the watch is not officially released. maybe wait until friday or monday to give it time?
also you may have to "Reset mobile networks" once you get them to provision the watch on the network. I had to do this when i changed the number on my watch a few months ago.
marctronixx said:
im on tmo and use the LTE frontier. i also have the lte watch 3 coming but thats on 9/09.
i did answer you over at the watch forum, but seems the imei is not yet in the system since the watch is not officially released. maybe wait until friday or monday to give it time?
also you may have to "Reset mobile networks" once you get them to provision the watch on the network. I had to do this when i changed the number on my watch a few months ago.
Click to expand...
Click to collapse
So do I need to call sprint after the imei is in the system to get a watch plan and separate # for it?
Sent from my SM-N975U using Tapatalk
racingmatt1 said:
So do I need to call sprint after the imei is in the system to get a watch plan and separate # for it?
Sent from my SM-N975U using Tapatalk
Click to expand...
Click to collapse
I don't have the watch 3 yet, but with my GAW2, all I did was go to the Galaxy Wear app ->Mobile Networks and took it from there, then once that was done, had Sprint (then it was just sprint) set up the line for it, a separate line. You have to have VoLTE active in your area though. I have set up three watches: OG GW, GAW2, and Apple Watch 5, pretty seemlessly. YMMV.
kbboykin said:
I don't have the watch 3 yet, but with my GAW2, all I did was go to the Galaxy Wear app ->Mobile Networks and took it from there, then once that was done, had Sprint (then it was just sprint) set up the line for it, a separate line. You have to have VoLTE active in your area though. I have set up three watches: OG GW, GAW2, and Apple Watch 5, pretty seemlessly. YMMV.
Click to expand...
Click to collapse
This is the errorView attachment 5082367
Sent from my SM-N975U using Tapatalk
racingmatt1 said:
This is the errorView attachment 5082367
Sent from my SM-N975U using Tapatalk
Click to expand...
Click to collapse
Idk. I only callled sprint when there was no VoLTE to find out why couldn't use as standalone, Once VoLTE was released, I have not had to call them. If this is our first watch setup, you may have to call to initially set it up.
kbboykin said:
Idk. I only callled sprint when there was no VoLTE to find out why couldn't use as standalone, Once VoLTE was released, I have not had to call them. If this is our first watch setup, you may have to call to initially set it up.
Click to expand...
Click to collapse
Here's the response
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my SM-N975U using Tapatalk
like i mentioned the device is not in the system yet. wait until the official launch day.
I bought mine from Samsung.com as well. I called T-Mobile to have it activated and added to my plan. They set the new watch up under the DIGITS plan and for some reason it was not properly setup correctly as I had to call back and speak to someone on the DIGITS team to get the LTE features of the watch to work.
Can anyone confirm if this is active on their phone (especially from India)? I really would like to switch to eSIM for both slots but a bit reluctant.
Google Pixel 7 now has dual eSIM support after Android 13 QPR2 Beta 2 update
It looks like dual eSIM support has finally found its way to the Pixel 7, and could get a wide release with the upcoming Pixel Feature Drop.
www.xda-developers.com
It's working for some and not working for others. There seems to be a required server side update on the sim manager app in order for it to work.
It's not working for me and I'm very annoyed about it.
Thank you, guess will have to wait some more time.
It's not working for me and I'm very annoyed about it.
Click to expand...
Click to collapse
But who exactly is it working for? I've seen one report and screenshot from a Reddit user. Everyone else I've seen test hasn't got it working. Back in October one person reportedly had dual eSim on this forum. So how do we know this isn't just another bug? I'd love it to be released in March feature drop, but I'm not holding my breath, so far I've seen no solid evidence that might indicate this, only hearsay and dubious "proof".
For what it's worth...
https://twitter.com/i/web/status/1616460377071702022
Thanks, but what does this mean? Google is slowly filtering out sim manager updates?
eshroom said:
But who exactly is it working for? I've seen one report and screenshot from a Reddit user. Everyone else I've seen test hasn't got it working. Back in October one person reportedly had dual eSim on this forum. So how do we know this isn't just another bug? I'd love it to be released in March feature drop, but I'm not holding my breath, so far I've seen no solid evidence that might indicate this, only hearsay and dubious "proof".
Click to expand...
Click to collapse
Seeing how I was the person who had dual eSIM here, it's more frustrating for me than others who didn't have it to begin with.
That said, there has been talk since just before release about Google releasing dual eSIM in the March update (they say Germany here but there's no reason they wouldn't drop it in the US where eSIM is actually useful) so here's hoping.
https://twitter.com/i/web/status/1580249885290663937
EtherealRemnant said:
Seeing how I was the person who had dual eSIM here, it's more frustrating for me than others who didn't have it to begin with.
That said, there has been talk since just before release about Google releasing dual eSIM in the March update (they say Germany here but there's no reason they wouldn't drop it in the US where eSIM is actually useful) so here's hoping.
https://twitter.com/i/web/status/1580249885290663937
Click to expand...
Click to collapse
As a European, I can confirm not having dual SIM here is a PIA, I have sims for 3 countries in Europe and when I travel further afield, I get a temporary 4th. At least with a dual SIM tray you have flexibility, but the current pixel 7 is driving me nuts. I bought it knowing dual esim wouldn't drop until March, so the lost convenience of a dual SIM tray was factored in. I just hope it does actually drop.
Do you not still have dual esim then?
eshroom said:
As a European, I can confirm not having dual SIM here is a PIA, I have sims for 3 countries in Europe and when I travel further afield, I get a temporary 4th. At least with a dual SIM tray you have flexibility, but the current pixel 7 is driving me nuts. I bought it knowing dual esim wouldn't drop until March, so the lost convenience of a dual SIM tray was factored in. I just hope it does actually drop.
Do you not still have dual esim then?
Click to expand...
Click to collapse
It's becoming more and more common for people to carry around multiple carriers here in the US too and eSIM is really taking off.
Nope, they took it away some time between October and December. I wasn't using it at that point so I didn't notice it was gone until I wanted to use it when I picked up a second eSIM again in December.
Anyone tried Beta 3 for dual eSim?
eshroom said:
Anyone tried Beta 3 for dual eSim?
Click to expand...
Click to collapse
Doesn't work.
Here is what Google says.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Aks said:
Here is what Google says.
View attachment 5829427
Click to expand...
Click to collapse
Taking with a pinch of salt since feature drop isn't due till march. That said, SIM manager app is not necessarily related to feature drop.
That also said, if this post on Reddit is reliable, SIM manager isn't what controls MEP (as the current SIM manager available for non Beta devices was updated in October and is Version D.2.1.473171966).
I successfully downloaded 2 esim profiles using Google Fi and Verizon. Works fine. Only flaw is can only have 1 active at a time. Using 1 esim and 1 physical sim, you can use data from one profile and calls and texts from the second profile.
as10158508 said:
I successfully downloaded 2 esim profiles using Google Fi and Verizon. Works fine. Only flaw is can only have 1 active at a time. Using 1 esim and 1 physical sim, you can use data from one profile and calls and texts from the second profile.
Click to expand...
Click to collapse
Multiple eSim profiles is standard, what is supposedly coming soon is dual active eSims.