Database Develop

Turbo firmware?

Hello need help tracking down stock turbo firmware. The Motofirmware website (http://motofirmware.center/files/category/23-droid-turbo/downloads) are corrupted. The links in this thread are all dead: http://forum.xda-developers.com/moto-maxx/general/quark-stock-firmware-moto-maxx-droid-t3063470. Does anyone know of another source for stock 5.1?

http://motofirmware.center/

Stanleywinthrop said:
Hello need help tracking down stock turbo firmware. Does anyone know of another source for stock 5.1?
Click to expand...
Click to collapse
Here is the file download link for the latest xt1254 droid turbo 5.1 lollipop firmware:
https://www.androidfilehost.com/?fid=24052804347843637

Thanks, jala, but if you had bothered to fully read you'd see that the files on that website are corrupted.

jalal-jap said:
http://motofirmware.center/
Click to expand...
Click to collapse
Thanks, classic, i'll give this a try.
classic757 said:
Here is the file download link for the latest xt1254 droid turbo 5.1 lollipop firmware:
https://www.androidfilehost.com/?fid=24052804347843637
Click to expand...
Click to collapse

Stanleywinthrop said:
Thanks, classic, i'll give this a try.
Click to expand...
Click to collapse
No problem. Please let me know how it turns out.

Stanleywinthrop said:
Thanks, jala, but if you had bothered to fully read you'd see that the files on that website are corrupted.
Click to expand...
Click to collapse
i have same problem. extract it whit "7ZIP" and no corrupted for me.

http://www.rootjunkysdl.com/getdown...o/Firmware/VRZ_XT1254_SU4TL-44_44_CFC.xml.zip -> Full firmware (not OTA) of the most recent version of 5.1

TheSt33v said:
http://www.rootjunkysdl.com/getdown...o/Firmware/VRZ_XT1254_SU4TL-44_44_CFC.xml.zip -> Full firmware (not OTA) of the most recent version of 5.1
Click to expand...
Click to collapse
I get this error:
http://i.imgur.com/EOPsxnB.png

dmginc said:
I get this error:
http://i.imgur.com/EOPsxnB.png
Click to expand...
Click to collapse
Are you using RSDlite? If so, you're getting this error (I think) because the PRODUCT_CONFIGURATION.xml file has instructions for other phone models besides the Turbo in it. If I remember correctly, I got around this by deleting the info for everything not labeled QUARK_VERIZON in this file. However, since RSDlite basically just automates fastboot, a better option is to use fastboot to flash this firmware, in my opinion.
If you decide to flash the firmware this way, place all of the files from the full firmware into the directory that you installed fastboot, and enter the following commands after your phone is plugged into your computer in bootloader mode:
fastboot flash partition gpt.bin
fastboot flash motoboot bootloader.img
fastboot flash radio radio.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk1
fastboot flash system system.img_sparsechunk2
fastboot flash system system.img_sparsechunk3
<repeat until all sparsechunks are flashed>
fastboot erase ddr
fastboot erase cache
fastboot erase userdata (NOTE: this command effectively performs a factory reset, and will erase all of your data)
Then boot, and you will have done everything that RSDlite would have done.

Oh thanks. Good info. Is there a write up on using fastboot anywhere? These forums are pretty poorly maintained and no good stickies anywhere
Edit: Oh, you edited your post. Awesome. Thanks.

The root junky fxz is that for rsd lite when I look at the contents the system image is in several sections and says system.img sparsechunk and has 10 sections. I have never seen this in an fxz. Is this a new way of flashing the system image.

TheSt33v said:
Are you using RSDlite? If so, you're getting this error (I think) because the PRODUCT_CONFIGURATION.xml file has instructions for other phone models besides the Turbo in it. If I remember correctly, I got around this by deleting the info for everything not labeled QUARK_VERIZON in this file. However, since RSDlite basically just automates fastboot, a better option is to use fastboot to flash this firmware, in my opinion.
If you decide to flash the firmware this way, place all of the files from the full firmware into the directory that you installed fastboot, and enter the following commands after your phone is plugged into your computer in bootloader mode:
fastboot flash partition gpt.bin
fastboot flash motoboot bootloader.img
fastboot flash radio radio.img
fastboot flash logo logo.bin
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img_sparsechunk1
fastboot flash system system.img_sparsechunk2
fastboot flash system system.img_sparsechunk3
<repeat until all sparsechunks are flashed>
fastboot erase ddr
fastboot erase cache
fastboot erase userdata (NOTE: this command effectively performs a factory reset, and will erase all of your data)
Then boot, and you will have done everything that RSDlite would have done.
Click to expand...
Click to collapse
Is it possible for me to relock my bootloader using adb fastboot? I don't want to do it accidentally while messing around with different roms and wiping my way back to stock.

When in fastboot, type "fastboot oem lock" (without the quotations"

Btrusa said:
When in fastboot, type "fastboot oem lock" (without the quotations"
Click to expand...
Click to collapse
Wouldn't that lock the bootloader?
Is it even possible to re-lock?
From what I understand he wants to avoid locking the bootloader...
Edit: nevermind I looked it up... Should have just done that the first time... ("I have seen quite of few people screw up their devices by not knowing what they are doing. So I am making this thread to simply tell people not familiar with fastboot what they should and should not do.
Fastboot oem unlock will unlock your bootloader and do a complete wipe of your device. As far as I know the only way for something to go wrong here is if you're device is low on battery and shuts off during the process. Either plug it in or have a "good" amount of juice left in your battery. To be 100 percent sure plug it in.
Before I get into oem lock IMHO you should only use this command for one thing only. Getting the device ready to send into motorola for the LGT upgrade or a another warranty repair or some sort. When done properly it is completely safe but there is no reason to do to go back to "stock".
Fastboot oem lock. Do not issue this command unless you are absolutely sure you have the correct software on your device. The correct software is what you get from the motodev site for your device. You need the official sofware images for your specific device AND REGION. If it is not released then DO NOT re-lock the device. If you have a OTA installed you will need to flash back to the motodev images first.")

dmginc said:
Is it possible for me to relock my bootloader using adb fastboot? I don't want to do it accidentally while messing around with different roms and wiping my way back to stock.
Click to expand...
Click to collapse
Nope

So is the fastboot flash motoboot bootloader.img just the Motorola "M" splash screen?
Sent from my XT1254 using Tapatalk

dmginc said:
So is the fastboot flash motoboot bootloader.img just the Motorola "M" splash screen?
Click to expand...
Click to collapse
No, that is the actual bootloader. The code that manages device startup, takes fastboot commands, and prohibits unsigned images from booting (when locked).
The splash screen is flashed with:
fastboot flash logo logo.bin

unhappybirthday said:
No, that is the actual bootloader. The code that manages device startup, takes fastboot commands, and prohibits unsigned images from booting (when locked).
The splash screen is flashed with:
fastboot flash logo logo.bin
Click to expand...
Click to collapse
So, back to my original question. When flashing back to stock with adb, but wanting to keep my bootloader unlocked, what should I do?

dmginc said:
So, back to my original question. When flashing back to stock with adb, but wanting to keep my bootloader unlocked, what should I do?
Click to expand...
Click to collapse
I can only speak from my experience. I was on the KitKat bootloader and used mofo to flash lollipop. I unlocked with sunshine and installed twrp. Then I flashed the lollipop bootloader with the fastboot command . Still unlocked.
Sent from my DROID Turbo using Tapatalk.

HELP .dirtycow

my phoe is broken i need to flash twrp and i cant to do it ,i setup cyanogenmod recovery by mistake and this recovery is fault because i cant even transfer any files form computer to mobile .. i try to flash with sp tool but it give me error because my phone is broken ,i try also dirtycow v11 on my phone to try flash twrp but it cant read phone on the computer and i setup V21 rom ??
sorry for bad english

any HElp plaese?

meroher said:
any HElp plaese?
Click to expand...
Click to collapse
How you mean broken?
Can it boot to fastboot mode?

YEP IT CAN BOOT TO FASTBOOT ?! then what?

mrmazak said:
how you mean broken?
Can it boot to fastboot mode?
Click to expand...
Click to collapse
plaese man help me my mob is still broken ineed it now

meroher said:
plaese man help me my mob is still broken ineed it now
Click to expand...
Click to collapse
I don't get notified that you answer if you do not quote.
you only answered one of the questions. You did not tell what is "broke"
no help you if you do not know what you need help with.

mrmazak said:
I don't get notified that you answer if you do not quote.
you only answered one of the questions. You did not tell what is "broke"
no help you if you do not know what you need help with.
Click to expand...
Click to collapse
oki iget it
first i had a twrp recovery and i try to install other recovery so
i install this recovery
https://forum.xda-developers.com/r1-hd/development/beta-cyanogenmod-recovery-blu-r1-hd-t3462614
and this recovery cant let me to install any rom or to back to install twrp recovery
and blu cant boot up he freeze on blu white screen
any thing else i will tell you
thanks for you help

meroher said:
oki iget it
first i had a twrp recovery and i try to install other recovery so
i install this recovery
https://forum.xda-developers.com/r1-hd/development/beta-cyanogenmod-recovery-blu-r1-hd-t3462614
and this recovery cant let me to install any rom or to back to install twrp recovery
and blu cant boot up he freeze on blu white screen
any thing else i will tell you
thanks for you help
Click to expand...
Click to collapse
Ok you installed this cm recovery with twrp?
android is not booting. (v21)
the cm recovery does boot but not allow install anything.
And fastboot is loading.
probably need to fastboot flash boot.img , I will share a superSU patched version. (you do not need to root system if not wanted, but patched boot is needed to boot a moddified system)
and fastboot flash twrp.
download this zip.
extract files to your desktop
use these fastboot commands to test first
This one to boot the phone
Code:
fastboot boot %userprofile%\Desktop\su-boot.img
This one to boot twrp
Code:
fastboot boot %userprofile%\Desktop\twrp_p6601_7.1_recovery.img

mrmazak said:
Ok you installed this cm recovery with twrp?
android is not booting. (v21)
the cm recovery does boot but not allow install anything.
And fastboot is loading.
probably need to fastboot flash boot.img , I will share a superSU patched version. (you do not need to root system if not wanted, but patched boot is needed to boot a moddified system)
and fastboot flash twrp.
download this zip.
extract files to your desktop
use these fastboot commands to test first
This one to boot the phone
Code:
fastboot boot %userprofile%\Desktop\su-boot.img
This one to boot twrp
Code:
fastboot boot %userprofile%\Desktop\twrp_p6601_7.1_recovery.img
Click to expand...
Click to collapse
Quote:
FIRST WHEN SEE YOU POST I TRY THIS CODES BEFORE TRYING WITH YOUR CODES
Lets see how quick and easy this really is...
In the command line type:
Code:
fastboot devices
Seeing your serial number means we know all is good
Now lets type these commands:
Code:
fastboot erase system -w
fastboot erase boot
fastboot update superawesomerom.zip
Of course replace <superawesomerom.zip> with the correct file name
and last but not least:
Code:
fastboot reboot
THANKS IT WORKS BUT WHEN I GO TO RECOVERY IT GO TO BOOT directly again AND again
WHATS BROBLEAM !

meroher said:
Quote:
FIRST WHEN SEE YOU POST I TRY THIS CODES BEFORE TRYING WITH YOUR CODES
Lets see how quick and easy this really is...
In the command line type:
Code:
fastboot devices
Seeing your serial number means we know all is good
Now lets type these commands:
Code:
fastboot erase system -w
fastboot erase boot
fastboot update superawesomerom.zip
Of course replace <superawesomerom.zip> with the correct file name
and last but not least:
Code:
fastboot reboot
THANKS IT WORKS BUT WHEN I GO TO RECOVERY IT GO TO BOOT directly again AND again
WHATS BROBLEAM !
Click to expand...
Click to collapse
WOW
WTF
Idon't know who told you to use those commands, but I am not familiar with using
Code:
fastboot erase system -w
fastboot erase boot
fastboot update superawesomerom.zip
so i dont know what to tell you.
why do you say "it worked" but then say it "just boots again AND again"
to me that is not worked, that is mean it made bootloop. so not worked.

mrmazak said:
WOW
WTF
Idon't know who told you to use those commands, but I am not familiar with using
Code:
fastboot erase system -w
fastboot erase boot
fastboot update superawesomerom.zip
so i dont know what to tell you.
why do you say "it worked" but then say it "just boots again AND again"
to me that is not worked, that is mean it made bootloop. so not worked.
Click to expand...
Click to collapse
ok sorry
the mobile now in a bootloop as you say any solution to this issue and iam sorry again >>+
i get codes from here
https://forum.xda-developers.com/showpost.php?p=41374686&postcount=4
this post please stay with me to back up this phone

meroher said:
ok sorry
the mobile now in a bootloop as you say any solution to this issue and iam sorry again >>+
i get codes from here
https://forum.xda-developers.com/showpost.php?p=41374686&postcount=4
this post please stay with me to back up this phone
Click to expand...
Click to collapse
I am not aware of any zip file available to flash the way that guide had you try.
As it stands you wiped boot and system.
I am away from PC so typing is not as easy. I will be more detailed when I return.
Basically I suggest you to "flash" the boot.img I sent.
Then "boot" the recovery.
If the recovery then boots. Install a rom from my modifes stock roms thread.

oki i try install recovery but it same thing it go to white screen and restart again and again
i will wait for you to help me more thanks ><

mrmazak said:
I am not aware of any zip file available to flash the way that guide had you try.
As it stands you wiped boot and system.
I am away from PC so typing is not as easy. I will be more detailed when I return.
Basically I suggest you to "flash" the boot.img I sent.
Then "boot" the recovery.
If the recovery then boots. Install a rom from my modifes stock roms thread.
Click to expand...
Click to collapse
oki i will wait you thanks for your time

meroher said:
oki i will wait you thanks for your time
Click to expand...
Click to collapse
So this is what i suggest
use the files i gave before, unzipped to desktop.
This one to Flash boot.img
Code:
fastboot flash boot %userprofile%\Desktop\su-boot.img
This one to boot twrp.img
Code:
fastboot boot %userprofile%\Desktop\twrp_p6601_7.1_recovery.img
I expect that to give you a working twrp environment. Then go to linked thread and install really any version you want. But as you said you were on V21, so pick that one I supose.
https://forum.xda-developers.com/r1-hd/development/modified-8-3-stock-rom-t3602672

mrmazak said:
So this is what i suggest
use the files i gave before, unzipped to desktop.
This one to Flash boot.img
Code:
fastboot flash boot %userprofile%\Desktop\su-boot.img
This one to boot twrp.img
Code:
fastboot boot %userprofile%\Desktop\twrp_p6601_7.1_recovery.img
I expect that to give you a working twrp environment. Then go to linked thread and install really any version you want. But as you said you were on V21, so pick that one I supose.
https://forum.xda-developers.com/r1-hd/development/modified-8-3-stock-rom-t3602672
Click to expand...
Click to collapse
it works fine finally thanks very much for help :]:]:laugh::laugh:

Device is corrupt. It can't be trusted and will not boot

Can't even fastboot flash boot recovery system...and thats all folks...waste of money.

Failed attempt to unlock the bootloader and instal TWRP ?

Hi guys, visit this link. We had similar problems and we could solved that.
Read all and you would get the solution
https://forum.xda-developers.com/red-magic-3/help/stuck-fastboot-mode-t3937527/page9

roadworker said:
Failed attempt to unlock the bootloader and instal TWRP ?
Click to expand...
Click to collapse
No I installed Chinese v2.27.... Well it's absolute mess like I never seen Android before. Then attempted to flash global again, problems to the point of corruption. I have fastboot flashed all key elements of working Android phone multiple times. Can only get to fastboot after boot screen that I have to do manually. Recovery system is toast.... Guess it's back to Poco F1.... Learned my lesson from junk.

Just flash the ROM again..It will be back lm

mhex said:
Just flash the ROM again..It will be back lm
Click to expand...
Click to collapse
Trying to NA Global original rom, problem is no recovery at all....I can only flash within fastboot.....which is not a problem, but phone is not taking it flashing all images individually and modem. And I know it's flashing cause fastboot is saying okay and bootloader showing unlocked

SuperDroidMe said:
Trying to NA Global original rom, problem is no recovery at all....I can only flash within fastboot.....which is not a problem, but phone is not taking it flashing all images individually and modem. And I know it's flashing cause fastboot is saying okay and bootloader showing unlocked
Click to expand...
Click to collapse
Every time you restart back to the bootloader you need to do: "fastboot oem nubia_unlock NUBIA_NX629J" first

SuperDroidMe said:
No I installed Chinese v2.27.... Well it's absolute mess like I never seen Android before. Then attempted to flash global again, problems to the point of corruption. I have fastboot flashed all key elements of working Android phone multiple times. Can only get to fastboot after boot screen that I have to do manually. Recovery system is toast.... Guess it's back to Poco F1.... Learned my lesson from junk.
Click to expand...
Click to collapse
So YOU mess up your phone by trying to flash sh!t and you blame the MANUFACTURER? Yeah ok. Lmao. Enjoy the new paperweight that YOU CREATED.

xphyle1971 said:
So YOU mess up your phone by trying to flash sh!t and you blame the MANUFACTURER? Yeah ok. Lmao. Enjoy the new paperweight that YOU CREATED.
Click to expand...
Click to collapse
LMAO if you can't go from stock global to stock Chinese and reverse from the manufacturer with their recovery, you haven't got a prayer for custom roms or mods.

SuperDroidMe said:
LMAO if you can't go from stock global to stock Chinese and reverse from the manufacturer with their recovery, you haven't got a prayer for custom roms or mods.
Click to expand...
Click to collapse
if you stuck in the Device is corrupt. It can't be trusted and will not boot and you are in the Chinese or global rom then flash the stock boot image via adb. well I am using a Chinese v2.27 rom with rooted +gapps and then realized that most of the google apps wont work correctly because of the unlocked bootloader. I tried to lock the bootloader via adb then the message "Device is corrupt. It can't be trusted and will not boot" show up. so I try to use adb to flash the stock boot image then it work. first place the stock boot image to the "Minimal ADB and Fastboot" folder which located in the local drive under program file(x86) then run the command
fastboot flash boot boot.img
fastboot reboot

mswl04 said:
if you stuck in the Device is corrupt. It can't be trusted and will not boot and you are in the Chinese or global rom then flash the stock boot image via adb. well I am using a Chinese v2.27 rom with rooted +gapps and then realized that most of the google apps wont work correctly because of the unlocked bootloader. I tried to lock the bootloader via adb then the message "Device is corrupt. It can't be trusted and will not boot" show up. so I try to use adb to flash the stock boot image then it work. first place the stock boot image to the "Minimal ADB and Fastboot" folder which located in the local drive under program file(x86) then run the command
fastboot flash boot boot.img
fastboot reboot
Click to expand...
Click to collapse
Bud I put so much effort in last 13 hours to no avail....fastboot erased all partitions, reformatted, reflashed to no avail. Right now it just boots loops on Chinese 2.27 boot splash, I do have Chinese recovery though, but the same otg adapter and pen drive that works on 5 different devices, this damn phone won't read it so even that is out of the question. I wipe my hands clean of it, some things just best to put a bullet through it.

SuperDroidMe said:
Bud I put so much effort in last 13 hours to no avail....fastboot erased all partitions, reformatted, reflashed to no avail. Right now it just boots loops on Chinese 2.27 boot splash, I do have Chinese recovery though, but the same otg adapter and pen drive that works on 5 different devices, this damn phone won't read it so even that is out of the question. I wipe my hands clean of it, some things just best to put a bullet through it.
Click to expand...
Click to collapse
btw did you rooted the phone?

mswl04 said:
btw did you rooted the phone?
Click to expand...
Click to collapse
No BS, all I did was flash CN 2.27 over NA Global, after a look at the mess it was I proceeded to flash NA Global back.....no TWRP No Root with SuperSU or Magisk. But in fastboot it does say Root=1, so I guess the CN 2.27 rooted it by default cause I sure as hell didn't. One thing that is bothering me while in fastboot unlock bootloader I can't turn Secure Boot off which I believe is why it won't boot system.

SuperDroidMe said:
No BS, all I did was flash CN 2.27 over NA Global, after a look at the mess it was I proceeded to flash NA Global back.....no TWRP No Root with SuperSU or Magisk. But in fastboot it does say Root=1, so I guess the CN 2.27 rooted it by default cause I sure as hell didn't. One thing that is bothering me while in fastboot unlock bootloader I can't turn Secure Boot off which I believe is why it won't boot system.
Click to expand...
Click to collapse
don't give up I know how do you feel did you download this update from the official red magic website http://ui.nubia.cn/rom/detail/62 after you download the update and it will be in a zip file extract the boot image. then try to follow the root guild https://forum.xda-developers.com/red-magic-3/how-to/red-magic-3-root-guide-t3933148 in the website download the adb and then run the command which I reply earlier
seem to me it is like a soft brick

mswl04 said:
don't give up I know how do you feel did you download this update from the official red magic website http://ui.nubia.cn/rom/detail/62 after you download the update and it will be in a zip file extract the boot image. then try to follow the root guild https://forum.xda-developers.com/red-magic-3/how-to/red-magic-3-root-guide-t3933148 in the website download the adb and then run the command which I reply earlier
seem to me it is like a soft brick
Click to expand...
Click to collapse
I got CN version 2.27 images, am I supposed to be using one of the other versions off the official site?

SuperDroidMe said:
I got CN version 2.27 images, am I supposed to be using one of the other versions off the official site?
Click to expand...
Click to collapse
all you need to do is to fix the corrupt image so later once you finish the first step of booting to the phone then you can flash to global rom. if you have the cn version 2.27 boot.img then you can download the adb and use the command to fix the phone

Shouldn't have messed with something that wasn't broken. Now you have a nice brick to use as a paperweight. Hope you get it fixed tho. Good luck.

Solved Instructions:
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash parameter parameter.img
fastboot reboot bootloader
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash splash splash.img
fastboot flash modem NON-HLOS.bin
fastboot flash system system.img
fastboot flash dsp dspso.bin
fastboot oem nubia_lock NUBIA_NX629J
fastboot reboot
*****as soon as boot screen appears hold volume + button, now in recovery...navigate to wipe data and then wipe cache....then plug in otg usb pen drive (formatted FAT32) with Rom package .zip....navigate to update otg in recovery select it let it do its thing and walla your phone is fixed.
*****if you ever go from CN rom to Global rom you must Wipe Data and Cache through recovery, it is not enough to do it in fastboot and your device will remain soft bricked.

SuperDroidMe said:
Solved Instructions:
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash parameter parameter.img
fastboot reboot bootloader
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash splash splash.img
fastboot flash modem NON-HLOS.bin
fastboot flash system system.img
fastboot flash dsp dspso.bin
fastboot oem nubia_lock NUBIA_NX629J
fastboot reboot
*****as soon as boot screen appears hold volume + button, now in recovery...navigate to wipe data and then wipe cache....then plug in otg usb pen drive (formatted FAT32) with Rom package .zip....navigate to update otg in recovery select it let it do its thing and walla your phone is fixed.
*****if you ever go from CN rom to Global rom you must Wipe Data and Cache through recovery, it is not enough to do it in fastboot and your device will remain soft bricked.
Click to expand...
Click to collapse
Congrat you finally fix it

Hows your phone?..Did it work.

[Q]Stuck in fastboot mode did not check ub debugging

So i tried to change the global rom of my red magic 3 to the Chinese rom, i put the Chinese rom zip in the phone and i proceed to update it manually so it can be load, but when it was installing for the first time this error appears "your device is corrupt. it cant be trusted and will not boot", as i sais this error appears since the first time i tried to install it so did not have the opportunity to activate the developer options and check usb debugging and OEM unlock, i can use the bootloader to unlock the phone by using the command "fastboot oem nubia_unlock NUBIA_NX629J" but when i try to flash it by using this command "fastboot flashing unlock" this error appears "FAILED: (remote: flashing Unlock is not allowed)" so im stuck here, what can i do to continue or to go back to factory settings, i hope some one can help me.
im sorry for my bad English

Have you tried changing back to global rom using recovery mode through OTG cable?

kelv55l said:
Have you tried changing back to global rom using recovery mode through OTG cable?
Click to expand...
Click to collapse
i have not tried that, can you linkme how to do it?

Sinuhejrz said:
i have not tried that, can you linkme how to do it?
Click to expand...
Click to collapse
I went to this link https://forum.xda-developers.com/red-magic-3/help/stuck-fastboot-mode-t3937527
So basically you want to go into fastboot mode either using command "adb reboot bootloader" while plugging the phone into the computer or by holding down the volume down - and power button until it goes into fastboot mode.
Once you are in fastboot mode you go to "reboot to recovery mode" navigate while using the volume buttons and select by using the power button.
Now in recovery mode navigate by using volume buttons and select by using power button again. Its optional, but you can "wipe data" by wiping userdata partition and cache partition. I wiped data when I booted like this. Download the global from here https://global.redmagic.gg/blogs/news/red-magic-3-global-rom-flash-instructions I downloaded the North America version because that was the only version that worked for me. Put the zip file you downloaded into a flash drive USB. then connect the usb to the OTG cable you can buy from ebay, amazon or a nearby tech store. Then connect all that to your phone and click "Choose Update Package" and then click "Choose From OTG Device" then select the rom that you put in the usb drive and then everything should take care of itself from there.
Hope this helps!

kelv55l said:
I went to this link https://forum.xda-developers.com/red-magic-3/help/stuck-fastboot-mode-t3937527
So basically you want to go into fastboot mode either using command "adb reboot bootloader" while plugging the phone into the computer or by holding down the volume down - and power button until it goes into fastboot mode.
Once you are in fastboot mode you go to "reboot to recovery mode" navigate while using the volume buttons and select by using the power button.
Now in recovery mode navigate by using volume buttons and select by using power button again. Its optional, but you can "wipe data" by wiping userdata partition and cache partition. I wiped data when I booted like this. Download the global from here https://global.redmagic.gg/blogs/news/red-magic-3-global-rom-flash-instructions I downloaded the North America version because that was the only version that worked for me. Put the zip file you downloaded into a flash drive USB. then connect the usb to the OTG cable you can buy from ebay, amazon or a nearby tech store. Then connect all that to your phone and click "Choose Update Package" and then click "Choose From OTG Device" then select the rom that you put in the usb drive and then everything should take care of itself from there.
Hope this helps!
Click to expand...
Click to collapse
i cant go into recovery mode when i select that option the phone restarts and the same message appears "your device is corrupt. it cant be trusted and will not boot" , what can i do?

Sinuhejrz said:
i cant go into recovery mode when i select that option the phone restarts and the same message appears "your device is corrupt. it cant be trusted and will not boot" , what can i do?
Click to expand...
Click to collapse
Damn that happened to me to when I tried rooting my phone. My recovery mode was corrupt too. You can try to use the instructions given on this page https://forum.xda-developers.com/red-magic-3/help/device-corrupt-trusted-boot-t3940057/page2. Extract all img and bin files from the Global ROM and place them into the folder where the "cmd-here.exe" is. Also you need "system.img" you can download that here https://drive.google.com/drive/folders/16in6Jnyi4s5aIIuQwapQ1KK1LjysSfYm, but dont download the other files they might be the Chinese files.
After you extracted the img and bin files and placed them into the folder where the cmd is placed connect your phone to the computer, open the cmd exe and run the commands
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash parameter parameter.img
fastboot reboot bootloader
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash splash splash.img
fastboot flash modem NON-HLOS.bin
fastboot flash system system.img
fastboot flash dsp dspso.bin
fastboot oem nubia_lock NUBIA_NX629J
fastboot reboot
After all that you should be able to go into recovery mode through fastboot mode if not then try and flash dtbo.img and vbmeta.img in the line of commands so for example "fastboot flash dtbo dtbo.img" and "fastboot flash vbmeta vbmeta.img" looking something like this...
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash parameter parameter.img
fastboot reboot bootloader
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash splash splash.img
fastboot flash dtbo dtbo.img
fastboot flash vbmeta vbmeta.img
fastboot flash modem NON-HLOS.bin
fastboot flash dsp dspso.bin
fastboot flash system system.img
fastboot reboot
This was the line of commands I used when my recovery mode was corrupt and somehow worked
I hope this helps and let me know if it worked or if the issue is still there. Also the forum has several posts on this matter and they might have the answer you are looking for as it helped me with this issue. Good Luck!

kelv55l said:
Damn that happened to me to when I tried rooting my phone. My recovery mode was corrupt too. You can try to use the instructions given on this page https://forum.xda-developers.com/red-magic-3/help/device-corrupt-trusted-boot-t3940057/page2. Extract all img and bin files from the Global ROM and place them into the folder where the "cmd-here.exe" is. Also you need "system.img" you can download that here https://drive.google.com/drive/folders/16in6Jnyi4s5aIIuQwapQ1KK1LjysSfYm, but dont download the other files they might be the Chinese files.
After you extracted the img and bin files and placed them into the folder where the cmd is placed connect your phone to the computer, open the cmd exe and run the commands
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash parameter parameter.img
fastboot reboot bootloader
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash splash splash.img
fastboot flash modem NON-HLOS.bin
fastboot flash system system.img
fastboot flash dsp dspso.bin
fastboot oem nubia_lock NUBIA_NX629J
fastboot reboot
After all that you should be able to go into recovery mode through fastboot mode if not then try and flash dtbo.img and vbmeta.img in the line of commands so for example "fastboot flash dtbo dtbo.img" and "fastboot flash vbmeta vbmeta.img" looking something like this...
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash parameter parameter.img
fastboot reboot bootloader
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash splash splash.img
fastboot flash dtbo dtbo.img
fastboot flash vbmeta vbmeta.img
fastboot flash modem NON-HLOS.bin
fastboot flash dsp dspso.bin
fastboot flash system system.img
fastboot reboot
This was the line of commands I used when my recovery mode was corrupt and somehow worked
I hope this helps and let me know if it worked or if the issue is still there. Also the forum has several posts on this matter and they might have the answer you are looking for as it helped me with this issue. Good Luck!
Click to expand...
Click to collapse
OMG OMG OMG it works thank you so much dude you are THE MAN now i have more than an expensive weight-paper, i really appreciate it dude, the second code lines also works for me the only problem i encounter was in this code line "fastboot flash system system.img" throw this message "C:\adb>fastboot flash system system.img
target reported max download size of 805306368 bytes
Invalid sparse file format at header magi"
but i keep with the rest of the lines and works perfectly after that.
again thank you so much dude for the help :good::crying:

Sinuhejrz said:
OMG OMG OMG it works thank you so much dude you are THE MAN now i have more than an expensive weight-paper, i really appreciate it dude, the second code lines also works for me the only problem i encounter was in this code line "fastboot flash system system.img" throw this message "C:\adb>fastboot flash system system.img
target reported max download size of 805306368 bytes
Invalid sparse file format at header magi"
but i keep with the rest of the lines and works perfectly after that.
again thank you so much dude for the help :good::crying:
Click to expand...
Click to collapse
Awesome! glad I could help you out

kelv55l said:
Awesome! glad I could help you out
Click to expand...
Click to collapse
tnx man i really appreciate it, so could you change the ROM of you phone to the Chinese one?

Sinuhejrz said:
tnx man i really appreciate it, so could you change the ROM of you phone to the Chinese one?
Click to expand...
Click to collapse
Sorry man I haven't tried changing my ROM to Chinese yet. Don't want to risk corrupting my phone again :crying:
But I'll let you know if I decide to change my rom.

Sinuhejrz said:
tnx man i really appreciate it, so could you change the ROM of you phone to the Chinese one?
Click to expand...
Click to collapse
Pretty simple to change the ROM to chinese. Download the chinese ROM, place it in an OTG or the phone's root directory. You can either do it via local update from the system.update feature in settings or use the stock recovery and install it via the OTG. Personally I would.prefer you install it via the OTG.

Please help me !!! I have same problem with my rm3
Sinuhejrz said:
So i tried to change the global rom of my red magic 3 to the Chinese rom, i put the Chinese rom zip in the phone and i proceed to update it manually so it can be load, but when it was installing for the first time this error appears "your device is corrupt. it cant be trusted and will not boot", as i sais this error appears since the first time i tried to install it so did not have the opportunity to activate the developer options and check usb debugging and OEM unlock, i can use the bootloader to unlock the phone by using the command "fastboot oem nubia_unlock NUBIA_NX629J" but when i try to flash it by using this command "fastboot flashing unlock" this error appears "FAILED: (remote: flashing Unlock is not allowed)" so im stuck here, what can i do to continue or to go back to factory settings, i hope some one can help me.
im sorry for my bad English
Click to expand...
Click to collapse
Please help me !!! I have same problem with my rm3 :crying::crying::crying: PLEASE
---------- Post added at 09:57 PM ---------- Previous post was at 09:49 PM ----------
kelv55l said:
Awesome! glad I could help you out
Click to expand...
Click to collapse
PLEASE HELP ME Bro !!! I have same problem :crying::crying::crying:

hanif9067 said:
Please help me !!! I have same problem with my rm3 :crying::crying::crying: PLEASE
---------- Post added at 09:57 PM ---------- Previous post was at 09:49 PM ----------
PLEASE HELP ME Bro !!! I have same problem :crying::crying::crying:
Click to expand...
Click to collapse
Give me your address, I'll come to your house to fix the phone!

hanif9067 said:
Please help me !!! I have same problem with my rm3 :crying::crying::crying: PLEASE
---------- Post added at 09:57 PM ---------- Previous post was at 09:49 PM ----------
PLEASE HELP ME Bro !!! I have same problem :crying::crying::crying:
Click to expand...
Click to collapse
What seems to be the problem are you able to go into recovery mode?
If not then flashing the appropriate img and bin files should allow you to go back to recovery mode as explained on previous posts on this thread.

kelv55l said:
What seems to be the problem are you able to go into recovery mode?
If not then flashing the appropriate img and bin files should allow you to go back to recovery mode as explained on previous posts on this thread.
Click to expand...
Click to collapse
Mine has the same problem and tried all the steps in this thread. Not able to go into recovery mode, can go into fastboot mode and flash everything but phone is still corrupt and can not boot. New phone now no good, OH well

re-flashed the phone using the first version of the Chinese ROM v2.12 now can use the OTG update option. just need to get a usb adapter now

I'm hoping someone can help me. I've followed the fix on earlier pages and used the files including system.img a user uploaded.
Now when booting my phone I get a device is corrupt and cannot be trusted message. I read somewhere else that the command 'Fastboot flashing unlock' may solve this but I get an error message.
Would really appreciate some help, maybe I've done something wrong but I've followed the instructions and used the files an xda user uploaded.
Many thanks.

Johnnio said:
I'm hoping someone can help me. I've followed the fix on earlier pages and used the files including system.img a user uploaded.
Now when booting my phone I get a device is corrupt and cannot be trusted message. I read somewhere else that the command 'Fastboot flashing unlock' may solve this but I get an error message.
Would really appreciate some help, maybe I've done something wrong but I've followed the instructions and used the files an xda user uploaded.
Many thanks.
Click to expand...
Click to collapse
Have you tried to erase and then reflash again?
try something like this according from this user
em90256 said:
try this
fastboot -w
fastboot erase recovery
fastboot flash recovery recovery.img
fastboot reboot
try your stock recovery image
Click to expand...
Click to collapse

leipnacht said:
Have you tried to erase and then reflash again?
try something like this according from this user
Click to expand...
Click to collapse
Thanks but I managed to fix it yesterday, I had to flash the system image using 'fastboot flash -S 100M system system.img', turns out that although it reported flash as successful it wasn't actually sent correctly unless split into smaller chunks.

Johnnio said:
Thanks but I managed to fix it yesterday, I had to flash the system image using 'fastboot flash -S 100M system system.img', turns out that although it reported flash as successful it wasn't actually sent correctly unless split into smaller chunks.
Click to expand...
Click to collapse
Oh new information. What does "-S 100M" on fastboot command do?

i was updating china rom [ RED MAGIC 3 ] from local update and phone got curropted

it says your device is corrupt. it cant be trusted
how to fix it please help me how to start phone , i tryed some solution to flash and all that but nothing worked

I think u also same mistake. Before install cn rom. U not enable oem unlock option in davoloper features

brawlhack said:
it says your device is corrupt. it cant be trusted
how to fix it please help me how to start phone , i tryed some solution to flash and all that but nothing worked
Click to expand...
Click to collapse
Few days before I was in the same situation.
Tried lot of solution but the simplest to solve was using the below 2 command when in fastboot.
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flashing unlock
This should unlock the bootloader and you should be able continue the setup.
All the Best...

it says flashing unlock is not allowed
rajnathr said:
Few days before I was in the same situation.
Tried lot of solution but the simplest to solve was using the below 2 command when in fastboot.
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flashing unlock
This should unlock the bootloader and you should be able continue the setup.
All the Best...
Click to expand...
Click to collapse
it says flashing unlock is not allowed

Same thing happened to me, tried all the recommendations given on this site, none works . Any help will be appreciated, now i have a paper weight

re-flashed the phone using the first version of the Chinese ROM v2.12 now can use the OTG update option. just need to get a usb adapter now

Which files i need to flash
Steffran said:
re-flashed the phone using the first version of the Chinese ROM v2.12 now can use the OTG update option. just need to get a usb adapter now
Click to expand...
Click to collapse
Can you tell full step and i guess i need system.img also where i can get it ...kindly please help sir ?

https://drive.google.com/drive/folders/16in6Jnyi4s5aIIuQwapQ1KK1LjysSfYm
Here is the link to download required file by an XDA member.
But before you flash system image first try with the boot img and recovery img.
I was to getting the message that i cant flash so used the command for oem unlock which reset the counter to 1
After which did flashing of boot .img and then recovery.img
If issue the use the falshboot flashing unlock.
This were the steps used by me to recovery, i didnot do any other flashing.
Hope this helps you
Edit: After the oem unlock command directly try to flash boot and then recovery and then if required flashing unlock command.

its still saying your device is corrupt ...anyone can help me
rajnathr said:
https://drive.google.com/drive/folders/16in6Jnyi4s5aIIuQwapQ1KK1LjysSfYm
Here is the link to download required file by an XDA member.
But before you flash system image first try with the boot img and recovery img.
I was to getting the message that i cant flash so used the command for oem unlock which reset the counter to 1
After which did flashing of boot .img and then recovery.img
If issue the use the falshboot flashing unlock.
This were the steps used by me to recovery, i didnot do any other flashing.
Hope this helps you
Edit: After the oem unlock command directly try to flash boot and then recovery and then if required flashing unlock command.
Click to expand...
Click to collapse
its not booting after doing that please help me if possible can we talk in discord

using cm
fastboot oem nubia_unlock NUBIA_NX629J
fastboot -w
reboot phone done

after this
nil3m1 said:
using cm
fastboot oem nubia_unlock NUBIA_NX629J
fastboot -w
reboot phone done
Click to expand...
Click to collapse
after this i need to flash boot and recovery img ?